Search Results

Search found 2186 results on 88 pages for 'adam pi burch'.

Page 82/88 | < Previous Page | 78 79 80 81 82 83 84 85 86 87 88  | Next Page >

• Loading Native library to external Package in Eclipse not working. is it a Bug?

  - by TacB0sS

  I was about to report a but to Eclipse, but I was thinking to give this a chance here first: If I add an external package, the application cannot find the referenced native library, except in the case specified at the below: If my workspace consists of a single project, and I import an external package 'EX_package.jar' from a folder outside of the project folder, I can assign a folder to the native library location via: mouse over package - right click - properties - Native Library - Enter your folder. This does not work. In runtime the application does not load the library, System.mapLibraryName(Path) also does not work. Further more, if I create a User Library, and add the package to it and define a folder for the native library it still does not. If it works for you then I have a major bug since it does not work on my computer I test this in any combination I could think of, including adding the path to the windows PATH parameter, and so many other ways I can't even start to remember, nothing worked, I played with this for hours and had a colleague try to assist me, but we both came up empty. Further more, if I have a main project that is dependent on few other projects in my workspace, and they all need to use the same 'EX_package.jar' I MUST supply a HARD COPY INTO EACH OF THEM, it will ONLY (I can't stress the ONLYNESS, I got freaked out by this) work if I have a hard copy of the package in ALL of the project folders that the main project has a dependency on, and ONLY if I configure the Native path in each of them!! This also didn't do the trick. please tell me there is a solution to this, this drives me nuts... Thanks, Adam Zehavi.

  Read the article

• Box2dx: Cancel force on a body?

  - by Rosarch

  I'm doing pathfinding where I use force to push body to waypoints. However, once they get close enough to the waypoint, I want to cancel out the force. How can I do this? Do I need to maintain separately all the forces I've applied to the body in question? I'm using Box2dx (C#/XNA). Here is my attempt, but it doesn't work at all: internal PathProgressionStatus MoveAlongPath(PositionUpdater posUpdater) { Vector2 nextGoal = posUpdater.Goals.Peek(); Vector2 currPos = posUpdater.Model.Body.Position; float distanceToNextGoal = Vector2.Distance(currPos, nextGoal); bool isAtGoal = distanceToNextGoal < PROXIMITY_THRESHOLD; Vector2 forceToApply = new Vector2(); double angleToGoal = Math.Atan2(nextGoal.Y - currPos.Y, nextGoal.X - currPos.X); forceToApply.X = (float)Math.Cos(angleToGoal) * posUpdater.Speed; forceToApply.Y = (float)Math.Sin(angleToGoal) * posUpdater.Speed; float rotation = (float)(angleToGoal + Math.PI / 2); posUpdater.Model.Body.Rotation = rotation; if (!isAtGoal) { posUpdater.Model.Body.ApplyForce(forceToApply, posUpdater.Model.Body.Position); posUpdater.forcedTowardsGoal = true; } if (isAtGoal) { // how can the body be stopped? posUpdater.forcedTowardsGoal = false; //posUpdater.Model.Body.SetLinearVelocity(new Vector2(0, 0)); //posUpdater.Model.Body.ApplyForce(-forceToApply, posUpdater.Model.Body.GetPosition()); posUpdater.Goals.Dequeue(); if (posUpdater.Goals.Count == 0) { return PathProgressionStatus.COMPLETE; } } UPDATE If I do keep track of how much force I've applied, it fails to account for other forces that may act on it. I could use reflection and set _force to zero directly, but that feels dirty.

  Read the article

• Why i cant save a long text on my MySQL database?

  - by DomingoSL

  im trying to save to my data base a long text (about 2500 chars) input by my users using a web form and passed to the server using php. When i look in phpmyadmin, the text gets crop. How can i config my table in order to get the complete text? This is my table config: CREATE TABLE `extra_879` ( `id` bigint(20) NOT NULL auto_increment, `id_user` bigint(20) NOT NULL, `title` varchar(300) NOT NULL, `content` varchar(3000) NOT NULL, PRIMARY KEY (`id`), UNIQUE KEY `id_user` (`id_user`) ) ENGINE=MyISAM DEFAULT CHARSET=latin1 AUTO_INCREMENT=4 ; Take a look of the field content that have a limit of 3000 chars, but the texts always gets crop at 690 chars. Thanks for any help! EDIT: I found the problem but i dont know how to solve it. The query is getting crop always in the same char, an special char: ù EDIT 2: This is the cropped query: INSERT INTO extra_879 (id,id_user,title,content) VALUES (NULL,'1','Informazione Extra',' Riconoscimenti Laurea di ingegneria presa a le 22 anni e in il terso posto della promozione Diploma analista di sistemi ottenuto il rating massimo 20/20, primo posto della promozione. Borsa di Studio (offerta dal Ministero Esteri Italiano) vinta nel 2010 (Valutazione del territorio attraverso le nueve tecnologie) Pubblicazione di paper; Stima del RCS della nave CCGS radar sulla base dei risultati di H. Leong e H. Wilson. http://www.ing.uc.edu.vek-azozayalarchivospdf/PAPER-Sarmiento.pdf Tesi di laurea: PROGETTAZIONE E REALIZZAZIONE DI UN SIS-TEMA DI TELEMETRIA GSM PER IL CONTROLLO DELLO STATO DI TRANSITO VEICOLARE E CLIMA (ottenuto il punteggio pi') It gets crop just when the (ottenuto il punteggio più alto) phrase, just when ù appear... EDIT 3: I using jquery + ajax to send the query $.ajax({type: "POST", url: "handler.php", data: "e_text="+ $('#e_text').val() + "&e_title="+ $('#extra_title').val(),

  Read the article

• error in a pygame code

  - by mekasperasky

  # INTIALISATION import pygame, math, sys from pygame.locals import * screen = pygame.display.set_mode((1024, 768)) car = pygame.image.load('car.png') clock = pygame.time.Clock() k_up = k_down = k_left = k_right = 0 speed = direction = 0 position = (100, 100) TURN_SPEED = 5 ACCELERATION = 2 MAX_FORWARD_SPEED = 10 MAX_REVERSE_SPEED = ­5 BLACK = (0,0,0) while 1: # USER INPUT clock.tick(30) for event in pygame.event.get(): if not hasattr(event, 'key'): continue down = event.type == KEYDOWN # key down or up? if event.key == K_RIGHT: k_right = down * ­5 elif event.key == K_LEFT: k_left = down * 5 elif event.key == K_UP: k_up = down * 2 elif event.key == K_DOWN: k_down = down * ­2 elif event.key == K_ESCAPE: sys.exit(0) # quit the game screen.fill(BLACK) # SIMULATION # .. new speed and direction based on acceleration and turn speed += (k_up + k_down) if speed > MAX_FORWARD_SPEED: speed = MAX_FORWARD_SPEED if speed < MAX_REVERSE_SPEED: speed = MAX_REVERSE_SPEED direction += (k_right + k_left) # .. new position based on current position, speed and direction x, y = position rad = direction * math.pi / 180 x += ­speed*math.sin(rad) y += ­speed*math.cos(rad) position = (x, y) # RENDERING # .. rotate the car image for direction rotated = pygame.transform.rotate(car, direction) # .. position the car on screen rect = rotated.get_rect() rect.center = position # .. render the car to screen screen.blit(rotated, rect) pygame.display.flip() enter code here the error i get is this Non-ASCII character '\xc2' in file race1.py on line 13, but no encoding declared; see http://www.python.org/peps/pep-0263.html for details Not able to understand what the error is and how to get rid of it?

  Read the article

• Good PHP / MYSQL hashing solution for large number of text values

  - by Dave

  Short descriptio: Need hashing algorithm solution in php for large number of text values. Long description. PRODUCT_OWNER_TABLE serial_number (auto_inc), product_name, owner_id OWNER_TABLE owner_id (auto_inc), owener_name I need to maintain a database of 200000 unique products and their owners (AND all subsequent changes to ownership). Each product has one owner, but an owner may have MANY different products. Owner names are "Adam Smith", "John Reeves", etc, just text values (quite likely to be unicode as well). I want to optimize the database design, so what i was thinking was, every week when i run this script, it fetchs the owner of a proudct, then checks against a table i suppose similar to PRODUCT_OWNER_TABLE, fetching the owner_id. It then looks up owner_id in OWNER_TABLE. If it matches, then its the same, so it moves on. The problem is when its different... To optimize the database, i think i should be checking against the other "owner_name" entries in OWNER_TABLE to see if that value exists there. If it does, then i should use that owner_id. If it doesnt, then i should add another entry. Note that there is nothing special about the "name". as long as i maintain the correct linkagaes AND make the OWNER_TABLE "read-only, append-new" type table - I should be able create a historical archive of ownership. I need to do this check for 200000 entries, with i dont know how many unique owner names (~50000?). I think i need a hashing solution - the OWNER_TABLE wont be sorted, so search algos wont be optimal. programming language is PHP. database is MYSQL.

  Read the article

• SIP UAS asks for OPTIONS

  - by TacB0sS

  Hey, I have UAC that registers to a UAS, after registration the UAS sends me an OPTIONS request, what should I answer it? only the audio media streams? Update I: Allow me to explain myself better... if I want to invite someone to a session I USE the INVITE method and negotiate the media then, for that specific session. But once I register to the server, and it asks me for OPTIONS, then what should I supply, everything my client supports? once I answer it would it deduce that every INVITE I would request from now on would use these medias? or would I need to supply new media with every request? Update II: Hi Wiz, I was in the process of building a negotiation system, so i tried it out and replied the UAS here is the sort dialog we had: OPTIONS sip:[email protected] SIP/2.0 Via: SIP/2.0/UDP xx.xx.xx.xx:5060;branch=z9hG4bK45b197cb;rport=5060;received=xx.xx.xx.xx From: "Unknown" <sip:[email protected]>;tag=as66cf26df To: <sip:[email protected]> Contact: <sip:[email protected]> Call-ID: [email protected] CSeq: 102 OPTIONS User-Agent: Freeswitch 1.2.3 Max-Forwards: 70 Date: Sat, 05 Jun 2010 12:06:43 GMT Allow: INVITE,ACK,CANCEL,OPTIONS,BYE,REFER,SUBSCRIBE,NOTIFY,INFO Supported: replaces Content-Length: 0 OPTIONS In Response To 102: SIP/2.0 200 OK Via: SIP/2.0/UDP xx.xx.xx.xx:5060;branch=z9hG4bK45b197cb;rport=5060;received=xx.xx.xx.xx From: "Unknown" <sip:[email protected]>;tag=as66cf26df To: <sip:[email protected]> CSeq: 102 OPTIONS Call-ID: [email protected] Allow: INVITE,CANCEL,ACK,BYE,OPTIONS Content-Type: application/sdp Content-Length: 248 v=0 o=310 4515233118481497946 4515233118481497946 IN IP4 10.0.0.1 s=- i=Nu-Art Software - TacB0sS VoIP information c=IN IP4 10.0.0.1 m=audio 40000 RTP/AVP 0 8 101 a=rtpmap:0 PCMU/8000 a=rtpmap:8 PCMA/8000 a=rtpmap:101 telephone-event/8000 This response caused the server to stop sending me the options request, does this means I can only use these parameters with the server now? or as you said, it does not matter? Thanks, Adam.

  Read the article

• table subtraction challenge

  - by Valentin

  I have a challenge that I haven’t overcome in the last two days using Stored Procedures and SQL 2008. I took several approaches but must fell short. One appraoch very interesting was using a table substraction. It’s really all about table subtraction. I was wondering if you could help me crack this one. Here is the challenge: Two tables 1Testdb y 2Testdb. My first step was to select ID relationships ([2Testdb].Acc_id) on table 2Testdb for one given individual ([2Testdb].Bus_id). Then query table 1Testdb for records not mathcing my original selection from 2Testdb. But other approaches are welcome. Data and Structures: USE [Challengedb] GO SET ANSI_NULLS ON GO SET QUOTED_IDENTIFIER ON GO CREATE TABLE [dbo].[1Testdb]( [Acc_id] [uniqueidentifier] NULL [Name] [Varchar(10)] NULL ) ON [PRIMARY] GO CREATE TABLE [dbo].[2Testdb]( [Acc_id] [uniqueidentifier] NULL, [Bus_id] [uniqueidentifier] NULL ) ON [PRIMARY] GO Records on 1Testdb: 34455F60-9474-4521-804E-66DB39A579F3, John C23523F6-2309-4F58-BB3F-EF7486C7AF8B, Pete DC711615-3BE4-4B31-9EF2-B1314185CA62, Dave E3AAB073-2398-476D-828B-92829F686A4C, Adam Records on 2Testdb: (Relationship table, ex. Friend relationships) Record #1: DC711615-3BE4-4B31-9EF2-B1314185CA62, 34455F60-9474-4521-804E-66DB39A579F3 Record #2: E3AAB073-2398-476D-828B-92829F686A4C, 34455F60-9474-4521-804E-66DB39A579F3 Record # 3: DC711615-3BE4-4B31-9EF2-B1314185CA62, E3AAB073-2398-476D-828B-92829F686A4C Record # 4: E3AAB073-2398-476D-828B-92829F686A4C, DC711615-3BE4-4B31-9EF2-B1314185CA62 Challenge: Select from table 1Testdb only those records distinct that may not have a relationship with John [34455F60-9474-4521-804E-66DB39A579F3] on table 2Testdb. Expected result should be (Who does John doesn’t have relationship with?): C23523F6-2309-4F58-BB3F-EF7486C7AF8B, Pete Thank you, Valentin

  Read the article

• Why is my simple python gtk+cairo program running so slowly/stutteringly?

  - by synapz

  My program draws circles moving on the window. I think I must be missing some basic gtk/cairo concept because it seems to be running too slowly/stutteringly for what I am doing. Any ideas? Thanks for any help! #!/usr/bin/python import gtk import gtk.gdk as gdk import math import random import gobject # The number of circles and the window size. num = 128 size = 512 # Initialize circle coordinates and velocities. x = [] y = [] xv = [] yv = [] for i in range(num): x.append(random.randint(0, size)) y.append(random.randint(0, size)) xv.append(random.randint(-4, 4)) yv.append(random.randint(-4, 4)) # Draw the circles and update their positions. def expose(*args): cr = darea.window.cairo_create() cr.set_line_width(4) for i in range(num): cr.set_source_rgb(1, 0, 0) cr.arc(x[i], y[i], 8, 0, 2 * math.pi) cr.stroke_preserve() cr.set_source_rgb(1, 1, 1) cr.fill() x[i] += xv[i] y[i] += yv[i] if x[i] > size or x[i] < 0: xv[i] = -xv[i] if y[i] > size or y[i] < 0: yv[i] = -yv[i] # Self-evident? def timeout(): darea.queue_draw() return True # Initialize the window. window = gtk.Window() window.resize(size, size) window.connect("destroy", gtk.main_quit) darea = gtk.DrawingArea() darea.connect("expose-event", expose) window.add(darea) window.show_all() # Self-evident? gobject.idle_add(timeout) gtk.main()

  Read the article

• htmlspecialchars() - How and when to use and avoid multiple use

  - by naescent

  Hi, I'm building a PHP intranet for my boss. A simple customer, order, quote system. It will be denied access from the Internet and only used by 3 people. I'm not so concerned with security as I am with validation. Javascript is disables on all machines. The problem I have is this: Employee enters valid data into a form containing any of the following :;[]"' etc. Form $_POSTS this data to a validationAndProcessing.php page, and determines whether the employee entered data or not in to the fields. If they didn't they are redirected back to the data input page and the field they missed out is highlighted in red. htmlspecialchars() is applied to all data being re-populated to the form from what they entered earlier. Form is then resubmitted to validationAndProcessing.php page, if successful data is entered into the database and employee is taken to display data page. My question is this: If an employee repeatedly enters no data in step 1, they will keep moving between step 1 and 4 each time having htmlspecialchars() applied to the data. So that:- & becomes:- &amp; becomes:- &amp;amp; becomes:- &amp;amp;amp; etc.. How can I stop htmlspecialchars() being applied multiple times to data that is already cleaned? Thanks, Adam

  Read the article

• SetInterval missing property in js class

  - by sebastian

  I wrote simple class in JS witch works, but i had problem when i try use setInterval with it. Ex. if i do something like that ball = new ball(5,10,0, '#canvas'); ball.draw(); ball.draw(); ball.draw(); ball.draw(); It works. But this: ball = new ball(5,10,0, '#canvas'); setInterval(ball.draw, 100); Not work. I get error that values are undefined. function ball (x,y,z,holdingEl) { this.r = 5; //zmienna przechowujaca promien pilki this.size = this.r *2; // zmienna przechowujaca rozmiar this.ballSpeed = 100; // predkosc pilki this.ballWeight = 0.45; // masa pilki this.maxFootContactTime = 0.2; // maksymalny czas kontaktu pilki z noga - stala this.ctx = jQuery(holdingEl)[0].getContext("2d"); // obiekt pilki this.intVal = 100 // predkosc odswiezania this.currentPos = { // wspolrzedne pozycji x: x, y: y, z: z } this.interactionPos = { // wspolrzedne pozycji ostatniej interakcji x: -1, y: -1, z: -1 } this.direct = { // kierunek w kazdej plaszczyznie x : 1, y : 0, z : 0 } this.draw = function (){ this.ctx.clearRect(0,0,1100,800); this.ctx.beginPath(); this.ctx.arc(this.currentPos.x, this.currentPos.y, this.r, 0, Math.PI*2, true); this.ctx.closePath(); this.ctx.fill(); } }

  Read the article

• Ruby Alias and module_function

  - by Jesse J

  I'm trying to debug someone else's code and having trouble figuring out what's wrong. When I run rake, one of the errors I get is: 2) Error: test_math(TestRubyUnits): NoMethodError: undefined method `unit_sin' for CMath:Module /home/user/ruby-units/lib/ruby_units/math.rb:21:in `sin' This is the function that calls the method: assert_equal Math.sin(pi), Math.sin("180 deg".unit) And this is what the class looks like: module Math alias unit_sin sin def sin(n) Unit === n ? unit_sin(n.to('radian').scalar) : unit_sin(n) end alias unit_cos cos def cos(n) Unit === n ? unit_cos(n.to('radian').scalar) : unit_cos(n) end ... module_function :unit_sin module_function :sin module_function :unit_cos module_function :cos ... end (The ellipsis means "more of the same"). As far as I can see, this is valid Ruby code. Is there something I'm missing here that's causing the error, or could the error be coming from something else? Update: I'm wondering if the problem has to do with namespaces. This code is attempting to extend CMath, so perhaps the alias and/or module_function isn't actually getting into CMath, or something like that....

  Read the article

• context.Scale() with non-aspect ratio preserving parameters screws effective lineWith

  - by rrenaud

  I am trying to apply some natural transformations whereby the x axis is remapped to some very small domain, like from 0 to 1, whereas y is remapped to some small, but substantially larger domain, like 0 to 30. This way, drawing code can be nice and clean and only care about the model space. However, if I apply a scale, then lines are also scaled, which means that horizontal lines become extremely fat relative to vertical ones. Here is some sample code. When natural_height is much less than natural_height, the picture doesn't look as intended. I want the picture to look like this, which is what happens with a scale that preserves aspect ratio. rftgstats.c om/canvas_good.png However, with a non-aspect ratio preserving scale, the results look like this. rftgstats.c om/canvas_bad.png <html><head><title>Busted example</title></head> <body> <canvas id=example height=300 width=300> <script> var canvas = document.getElementById('example'); var ctx = canvas.getContext('2d'); var natural_width = 10; var natural_height = 50; ctx.scale(canvas.width / natural_width, canvas.height / natural_height); var numLines = 20; ctx.beginPath(); for (var i = 0; i < numLines; ++i) { ctx.moveTo(natural_width / 2, natural_height / 2); var angle = 2 * Math.PI * i / numLines; // yay for screen size independent draw calls. ctx.lineTo(natural_width / 2 + natural_width * Math.cos(angle), natural_height / 2 + natural_height * Math.sin(angle)); } ctx.stroke(); ctx.closePath(); </script> </body> </html>

  Read the article

• Conversion from C code to CudaC code I get unpredictable results

  - by Abhi

  include include include include define pi 3.14159265359 lo*lo*p-2*mu,freq=2.25*1e6,wavelength=(long double)lo/freq,dh=(long double)wavelength/ 30.0,dt=(long double)dh/(lo*1.5); (1000*dh)); (p*dh),lambdaplus2mudtbydh=(lambda+2*mu)*dt/dh,lambdadtbydh=lambda*dt/dh,dtmubydh=dt*mu/ dh; double**U,long double**V){ for(int k=0,l=0;k<=yno-1 && l<=yno;k++,l++){ U[i+1][l]+=dtbyrhodh*(X[i+1][l+1]-X[i+1][l]+Z[i+1][l]- Z[i][l]); [k+1]-Y[j][k+1]); } double**U,long double**V){ for(int k=0,l=0;k<=yno-1 && l<=yno;k++,l++){ U[i+1][k])+lambdadtbydh*(V[i+1][k+1]-V[i][k+1]); V[i][k+1])+lambdadtbydh*(U[i+1][k+1]-U[i+1][k]); U[j][l]); int main(){ clock_t start,end; long double time_taken; start=clock(); long double **X,**Y,**U,**V,**Z;int n=1; X=Make2DDoubleArray(xno+2,yno+2); Y=Make2DDoubleArray(xno+2,yno+2); Z=Make2DDoubleArray(xno+1,yno+1); U=Make2DDoubleArray(xno+2,yno+2); V=Make2DDoubleArray(xno+2,yno+2); for (n=1;n<=timesteps;n++){ } end=clock(); time_taken=(long double)(end-start)/CLOCKS_PER_SEC; printf("Time elapsed is %Lf\nGRID Size:%Lf*%Lf\nTime Steps Taken:%d\n",time_taken,(xno),floor(yno),n); return 0; }

  Read the article

• HTML, CSS: overbar matching square root symbol

  - by Pindatjuh

  Is there a way in HTML and/or CSS to do the following, but then correctly: √¯¯¯¯¯¯φ·(2π−γ) Such that there is an overbar above the expression, which neatly aligns with the &radic;? I know there is the Unicode &macr;, that looks like the overbar I need (as used in the above example, though as you can see – it doesn't align well with the root symbol). The solution I'm looking for works at least for one standard font, on most sizes, and all modern browsers. I can't use images; I'd like to have a pure HTML4/CSS way, without client scripting. Here is my current code, thank you Matthew Jones (+1) for the text-decoration: overline! Still some problems <div style="font-family: Georgia; font-size: 200%"> <span style="vertical-align: -15%;">&radic;</span><span style="text-decoration: overline;">&nbsp;x&nbsp;+&nbsp;1&nbsp;</span> </div> The line doesn't match the &radic; because I lowered it with 15% baseline height. (Because the default placement is not nice) The line thickness doesn't match the thickness of the &radic;. Thanks!

  Read the article

• Jquery Ajax + PHP

  - by Kris.Mitchell

  I am having problems with jQuery Ajax and PHP I have my php file set up to echo the data I am gathering from a mysql database. I have verified that the database is returning something and that the string at the end of the function actually contains data. What is happening though, is that it looks like the php echo is happening before the ajax call, causing the php data to be displayed at the top of the page, and not below in proper div. I think it might have something to do with timing of the ajax and the php call, but I am not sure. So, why is the data not getting caught by the .ajax and thrown into the div? Thanks for the help! jQuery $(document).ready(function() { $.ajax({ url: "../database_functions.php", type: "GET", data: "cat=jw&sub=pi&sort=no", cache: false, success: function (html) { alert("Success!"); $('#product-list').html(html); } }); }); PHP echo "Hello World";

  Read the article

• PDF (VisPDF component) Problem with DecimalSeparator in Delphi/C++Builder2009

  - by Katsumi

  Hello. I use VisPDF component Delphi/C++Builder 2009 and show text with ShowMessage(FloatToStrF(1.23, ffFixed, 6, 2)); // Output: 1,23 (right!) UnicodeString Text = "Hello world!"; VPDF->CurrentPage->UnicodeTextOutStr( x, y, 0, Text); ShowMessage(FloatToStrF(1.23, ffFixed, 6, 2)); // Output: 1.23 (false!) afer UnicodeTextOutStr() the DecimalSeparator is changed. I have look in VisPDF source and found, that: Abscissa := Angle * Pi / 180; X := XProjection(X) + StrHeight * sin(Abscissa); Y := (YProjection(Y)) - StrHeight * cos(Abscissa); MtxA := cos(Abscissa); MtxB := sin(Abscissa); SetTextMatrix(MtxA, MtxB, -MtxB, MtxA, X, Y); with SetTextMatrix() show up the bug. comment out this line, DecimalSeparator is right, but no text in my pdf. procedure TVPDFPage.SetTextMatrix(a, b, c, d, x, y: Single); var S: AnsiString; begin S := _CutFloat(a) + ' ' + _CutFloat(b) + ' ' + _CutFloat(c) + ' ' + _CutFloat(d) + ' ' + _CutFloat(x) + ' ' + _CutFloat(y) + ' Tm'; SaveToPageStream(S); end; procedure TVPDFPage.SaveToPageStream(ValStr: AnsiString); begin PageContent.Add(string(ValStr)); // PageContent: TStringList; end; I don't understand this function. Can somebody help? VisPDF does not use any DLL or other software to create PDF files. Using VisPDF is very easy and have good examples.

  Read the article

• T-SQL Query, combine columns from multiple rows into single column

  - by Shayne

  I have seeen some examples of what I am trying to do using COALESCE and FOR XML (seems like the better solution). I just can't quite get the syntax right. Here is what I have (I will shorten the fields to only the key ones): Table Fields ------ ------------------------------- Requisition ID, Number IssuedPO ID, Number Job ID, Number Job_Activity ID, JobID (fkey) RequisitionItems ID, RequisitionID(fkey), IssuedPOID(fkey), Job_ActivityID (fkey) I need a query that will list ONE Requisition per line with its associated Jobs and IssuedPOs. (The requisition number start with "R-" and the Job Number start with "J-"). Example: R-123 | "PO1; PO2; PO3" | "J-12345; J-6780" Sure thing Adam! Here is a query that returns multiple rows. I have to use outer joins, since not all Requisitions have RequisitionItems that are assigned to Jobs and/or IssuedPOs (in that case their fkey IDs would just be null of course). SELECT DISTINCT Requisition.Number, IssuedPO.Number, Job.Number FROM Requisition INNER JOIN RequisitionItem on RequisitionItem.RequisitionID = Requisition.ID LEFT OUTER JOIN Job_Activity on RequisitionItem.JobActivityID = Job_Activity.ID LEFT OUTER JOIN Job on Job_Activity.JobID = Job.ID LEFT OUTER JOIN IssuedPO on RequisitionItem.IssuedPOID = IssuedPO.ID

  Read the article

• [Ruby] Modifying object inside a loop doesn't change object outside of the loop?

  - by Jergason

  I am having problems with modifying objects inside blocks and not getting the expected values outside the blocks. This chunk of code is supposed to transform a bunch of points in 3d space, calculate a score (the rmsd or root mean squared deviation), and store both the score and the set of points that produced that score if it is lower than the current lowest score. At the end, I want to print out the best bunch of points. first = get_transformed_points(ARGV[0]) second = get_transformed_points(ARGV[1]) best_rmsd = first.rmsd(second) best_points = second #transform the points around x, y, and z and get the rmsd. If the new points # have a smaller rmsd, store them. ROTATION = 30 #rotate by ROTATION degrees num_rotations = 360/ROTATION radians = ROTATION * (Math::PI/180) num_rotations.times do |i| second = second * x_rotate num_rotations.times do |j| second = second * y_rotate num_rotations.times do |k| second = second * z_rotate rmsd = first.rmsd(second) if rmsd < best_rmsd then best_points = second best_rmsd = rmsd end end end end File.open("#{ARGV[1]}.out", "w") {|f| f.write(best_points.to_s)} I can print out the points that are getting stored inside the block, and they are getting transformed and stored correctly. However, when I write out the points to a file at the end, they are the same as the initial set of points. Somehow the best_points = second chunk doesn't seem to be doing anything outside of the block. It seems like there are some scoping rules that I don't understand here. I had thought that since I declared and defined best_points above, outside of the blocks, that it would be updated inside the blocks. However, it seems that when the blocks end, it somehow reverts back to the original value. Any ideas how to fix this? Is this a problem with blocks specifically?

  Read the article

• Do I need to Salt and Hash a randomly generated token?

  - by wag2639

  I'm using Adam Griffiths's Authentication Library for CodeIgniter and I'm tweaking the usermodel. I came across a generate function that he uses to generate tokens. His preferred approach is to reference a value from random.org but I considered that superfluous. I'm using his fall back approach of randomly generating a 20 character long string: $length = 20; $characters = '0123456789abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ'; $token = ''; for ($i = 0; $i < $length; $i++) { $token .= $characters[mt_rand(0, strlen($characters)-1)]; } He then hashes this token using a salt (I'm combing code from different functions) sha1($this->CI->config->item('encryption_key').$str); I was wondering if theres any reason to to run the token through the salted hash? I've read that simply randomly generating strings was a naive way of making random passwords but is the sh1 hash and salt necessary? Note: I got my encryption_key from https://www.grc.com/passwords.htm (63 random alpha-numeric)

  Read the article

• Length-1 arrays can be converted to python scalars error? python

  - by Randy

  from numpy import * from pylab import * from math import * def LogisticMap(a,x): return 4.*a*x*(1.-x) def CosineMap(a,x): return a*cos(x/(2.*pi)) def TentMap(a,x): if x>= 0 or x<0.5: return 2.*a*x if x>=0.5 or x<=1.: return 2.*a*(1.-x) a = 0.98 N = 40 xaxis = arange(0.0,N,1.0) Func = CosineMap subplot(211) title(str(Func.func_name) + ' at a=%g and its second iterate' %a) ylabel('X(n+1)') # set y-axis label plot(xaxis,Func(a,xaxis), 'g', antialiased=True) subplot(212) ylabel('X(n+1)') # set y-axis label xlabel('X(n)') # set x-axis label plot(xaxis,Func(a,Func(a,xaxis)), 'bo', antialiased=True) My program is supposed to take any of the three defined functions and plot it. They all take in a value x from the array xaxis from 0 to N and then return the value. I want it to plot a graph of xaxis vs f(xaxis) with f being any of the three above functions. The logisticmap function works fine, but for CosineMap i get the error "only length-1 arrays can be converted to python scalars" and for TentMap i get error "The truth value of an array with more than one element is ambiguous, use a.any() or a.all()". My tent map function is suppose to return 2*a*x if 0<=x<0.5 and it's suppose to return 2*a*(1-x) if 0.5<=0<=1.

  Read the article

• How to easily Generate Synth Chords Sounds in Android?

  - by barata7

  How to easily Generate Synth Chords Sounds in Android? I wanna be able to generate dynamically an in game Music using 8bit. Tried with AudioTrack, but did not get good results of nice sounds yet. Any examples out there? I have tried the following code without success: public class BitLoose { private final int duration = 1; // seconds private final int sampleRate = 4200; private final int numSamples = duration * sampleRate; private final double sample[] = new double[numSamples]; final AudioTrack audioTrack; public BitLoose() { audioTrack = new AudioTrack(AudioManager.STREAM_MUSIC, sampleRate, AudioFormat.CHANNEL_CONFIGURATION_MONO, AudioFormat.ENCODING_PCM_8BIT, numSamples, AudioTrack.MODE_STREAM); audioTrack.play(); } public void addTone(final int freqOfTone) { // fill out the array for (int i = 0; i < numSamples; ++i) { sample[i] = Math.sin(2 * Math.PI * i / (sampleRate / freqOfTone)); } // convert to 16 bit pcm sound array // assumes the sample buffer is normalised. final byte generatedSnd[] = new byte[numSamples]; int idx = 0; for (final double dVal : sample) { // scale to maximum amplitude final short val = (short) ((((dVal * 255))) % 255); // in 16 bit wav PCM, first byte is the low order byte generatedSnd[idx++] = (byte) (val); } audioTrack.write(generatedSnd, 0, sampleRate); } public void stop() { audioTrack.stop(); }

  Read the article

• Purpose of singletons in programming

  - by thecoshman

  This is admittedly a rather loose question. My current understanding of singletons is that they are a class that you set up in such a way that only one instance is ever created. This sounds a lot like a static class to me. The main differnce being that with a static class you don't / can't instance it, you just use it such as Math.pi(). With a singletong class, you would still need to do something like singleton mySingleton = new singleton(); mysingleton.set_name("foo"); singleton otherSingleton = new singleton(); // correct me if i am wrong, but mysingleton == othersingleton right now, yes? // this the following should happen? otherSingleston.set_name("bar"); mysingleton.report_name(); // will output "bar" won't it? Please note, I am asking this language independently, more about the concept. So I am not so worried about actually how to coed such a class, but more why you would wan't to and what thing you would need to consider.

  Read the article

• Detect mouseover and show tooltip text for dots on an HTML Canvas

  - by carl asquith

  Ive recently created a "map" although not very sophisticated (im working on it) it has the basic function and is generally heading in the right direction. If you look at it you can see a tiny red dots and on those tiny red dots i want to mouseover it and see text basically but ive had a bit of trouble getting the code right. http://hummingbird2.x10.mx/website%20creation/mainpage.htm This is all the code so far. <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN""http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <title>Oynx Warrior</title> <link rel="stylesheet" type="text/css" href="mystyle.css" /> </head> <body> <h1>Oynx Warrior</h1> <canvas id="myCanvas" width="500" height="500" style="border:1px solid #c3c3c3;"> Your browser does not support the canvas element. </canvas> <script type="text/javascript"> var c=document.getElementById("myCanvas"); var cxt=c.getContext("2d"); cxt.fillStyle="#red"; cxt.beginPath(); cxt.arc(50,50,1,0,Math.PI*2,true); cxt.closePath(); cxt.fill(); </script> </body> </html>

  Read the article

• Linear Interpolation. How to implement this algorithm in C ? (Python version is given)

  - by psihodelia

  There exists one very good linear interpolation method. It performs linear interpolation requiring at most one multiply per output sample. I found its description in a third edition of Understanding DSP by Lyons. This method involves a special hold buffer. Given a number of samples to be inserted between any two input samples, it produces output points using linear interpolation. Here, I have rewritten this algorithm using Python: temp1, temp2 = 0, 0 iL = 1.0 / L for i in x: hold = [i-temp1] * L temp1 = i for j in hold: temp2 += j y.append(temp2 *iL) where x contains input samples, L is a number of points to be inserted, y will contain output samples. My question is how to implement such algorithm in ANSI C in a most effective way, e.g. is it possible to avoid the second loop? NOTE: presented Python code is just to understand how this algorithm works. UPDATE: here is an example how it works in Python: x=[] y=[] hold=[] num_points=20 points_inbetween = 2 temp1,temp2=0,0 for i in range(num_points): x.append( sin(i*2.0*pi * 0.1) ) L = points_inbetween iL = 1.0/L for i in x: hold = [i-temp1] * L temp1 = i for j in hold: temp2 += j y.append(temp2 * iL) Let's say x=[.... 10, 20, 30 ....]. Then, if L=1, it will produce [... 10, 15, 20, 25, 30 ...]

  Read the article

• CreateProcessWithLogonW : unable to start process

  - by Vivek

  Hi I am completely new to programming. And please someone help me. I am trying to start a pocess from a service. I need to start the new process by prompting user to enter admin credentials. I was trying to use CreateProcessWithLogonW(). Am I using the right function. I tried to give input username, password, domain as localhost. I gave full pathe to the .exe file that i need to start. Here is the piece of code. CreateProcessWithLogonW(L"Administrator", L"localhost", L"password", 0, NULL, L"c:\myupdates\myapp.exe", NORMAL_PRIORITY_CLASS | CREATE_CONSOLE, NULL, NULL, &si, &pi); Si.cb = sizeof(si); Si.lpDesktop = L"winsta0\\default"; But the process never started. Can you guys tell me what I am doing wrong. And what do I need to do to promt user to enter credentials of administrator instead of hardcoding it.

  Read the article

< Previous Page | 78 79 80 81 82 83 84 85 86 87 88  | Next Page >