Search Results

Search found 4221 results on 169 pages for 'intel xeon'.

Page 82/169 | < Previous Page | 78 79 80 81 82 83 84 85 86 87 88 89  | Next Page >

• Randomely loosing wireless connexion with Cubuntu 12.04

  - by statquant

  I am presently experiencing random disconnections from my wireless network. It looks like it is more and more frequent (however I have not seen any clear pattern). This is killing me... Here is some information that should help (from ubuntu forums). Thanks for reading Machine : Acer Aspire S3 statquant@euclide:~$ lsb_release -d Description: Ubuntu 12.04.1 LTS statquant@euclide:~$ uname -mr 3.2.0-33-generic x86_64 statquant@euclide:~$ sudo /etc/init.d/networking restart * Running /etc/init.d/networking restart is deprecated because it may not enable again some interfaces * Reconfiguring network interfaces... statquant@euclide:~$ lspci 02:00.0 Network controller: Atheros Communications Inc. AR9485 Wireless Network Adapter (rev 01) statquant@euclide:~$ lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 004: ID 064e:c321 Suyin Corp. Bus 002 Device 003: ID 0bda:0129 Realtek Semiconductor Corp. statquant@euclide:~$ ifconfig wlan0 Link encap:Ethernet HWaddr 74:de:2b:dd:c4:78 inet addr:192.168.1.3 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::76de:2bff:fedd:c478/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:913 errors:0 dropped:0 overruns:0 frame:0 TX packets:802 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:873218 (873.2 KB) TX bytes:125826 (125.8 KB) statquant@euclide:~$ iwconfig wlan0 IEEE 802.11bgn ESSID:"Bbox-D646D1" Mode:Managed Frequency:2.437 GHz Access Point: 00:19:70:80:01:6C Bit Rate=65 Mb/s Tx-Power=16 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:on Link Quality=56/70 Signal level=-54 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:71 Missed beacon:0 statquant@euclide:~$ dmesg | grep "wlan" [ 17.495866] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 17.498950] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 20.072015] wlan0: authenticate with 00:19:70:80:01:6c (try 1) [ 20.269853] wlan0: authenticate with 00:19:70:80:01:6c (try 2) [ 20.272386] wlan0: authenticated [ 20.298682] wlan0: associate with 00:19:70:80:01:6c (try 1) [ 20.302321] wlan0: RX AssocResp from 00:19:70:80:01:6c (capab=0x431 status=0 aid=1) [ 20.302325] wlan0: associated [ 20.307307] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 30.402292] wlan0: no IPv6 routers present statquant@euclide:~$ sudo lshw -C network [sudo] password for statquant: *-network description: Wireless interface product: AR9485 Wireless Network Adapter vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:02:00.0 logical name: wlan0 version: 01 serial: 74:de:2b:dd:c4:78 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list rom ethernet physical wireless configuration: broadcast=yes driver=ath9k driverversion=3.2.0-33-generic firmware=N/A ip=192.168.1.3 latency=0 link=yes multicast=yes wireless=IEEE 802.11bgn resources: irq:17 memory:c0400000-c047ffff memory:afb00000-afb0ffff statquant@euclide:~$ iwlist scan wlan0 Scan completed : Cell 01 - Address: 00:19:70:80:01:6C Channel:6 Frequency:2.437 GHz (Channel 6) Quality=56/70 Signal level=-54 dBm Encryption key:on ESSID:"Bbox-D646D1" Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s 9 Mb/s; 12 Mb/s; 18 Mb/s Bit Rates:24 Mb/s; 36 Mb/s; 48 Mb/s; 54 Mb/s Mode:Master Extra:tsf=000000125fb152bb Extra: Last beacon: 40020ms ago IE: Unknown: 000B42626F782D443634364431 IE: Unknown: 010882848B960C121824 IE: Unknown: 030106 IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : TKIP Pairwise Ciphers (2) : CCMP TKIP Authentication Suites (1) : PSK IE: WPA Version 1 Group Cipher : TKIP Pairwise Ciphers (2) : CCMP TKIP Authentication Suites (1) : PSK IE: Unknown: 2A0100 IE: Unknown: 32043048606C IE: Unknown: DD180050F2020101820003A4000027A4000042435E0062322F00 IE: Unknown: 2D1A4C101BFF00000000000000000000000000000000000000000000 IE: Unknown: 3D1606080800000000000000000000000000000000000000 IE: Unknown: DD0900037F01010000FF7F IE: Unknown: DD0A00037F04010000000000 And... finally, please note that I did the following (after looking for fixes of similar problems), but unfortunately it did not work sudo modprobe -r iwlwifi sudo modprobe iwlwifi 11n_disable=1

  Read the article

• Areca 1880ix RAID hangs

  - by Dave

  Areca RAID controller ARC-1880ix-12 (firmware 1.50) hangs when on high load. My setup is: Chenbro 3U chassis Intel S5500BC mainboard Xeon 5603 CPU 16GB of RAM 12 Seagate SAS drives ST32000645SS (2 of them as hot spare, 10 as RAID10) Mellanox Infiniband HBA card This server is working as external infiniband storage for Xen VMs. When load is quite big Areca's firmware hangs - it becomes unreachable even from Areca's ethernet adapter. After resetting the server power it returns to normal operation. While Areca is hanged I can confirm that it is powered (ethernet link is active) and Infiniband HBA works Ok. Thanks in advance for any idea or suggestion where the problem might be!

  Read the article

• need advice for storing data setup hardware for client with 80TB per year of data footprint increase

  - by dasko

  hi everyone, i currently have a client that will be adding replicated data from satellite locations in the number of approximately 80TB per year. with this said in year 2 we will have 160TB and so on year after year. i want to do some sort of raid 10 or raid 6 setup. i want to keep the servers to approximately 4u high and rack mounted. all suggestions welcome on a replication strategy. we will be wanting to have one instance of the data in house and the other to be co-located (any suggestions on co-locate sites too?). the obvious hardware will be something like a rack mount server with hot swap trays and dual xeon based type processors. the use of the data is for archives of information, files will be made up of small file sizes. i can add or expand to this question if it is too vague. thanks for looking.

  Read the article

• Getting Audio from a Zone

  - by bleonard

  Now that I have Firefox and Java Web Start running from a zone, the last piece of the puzzle was audio (essential because most Flash content is accompanied by sound).  In the global zone there's a nice little utility called audiotest for testing your sound: bleonard@solaris:~$ audiotest Sound subsystem and version: SunOS Audio 4.0 (0x00040003) Platform: SunOS 5.11 snv_151a i86pc *** Scanning sound adapter #1 *** /dev/sound/audio810:0dsp (audio engine 0): audio810#0 - Performing audio playback test... <left> ................OK <right> ...............OK <stereo> ..............OK <measured sample rate 47727.00 Hz (-0.57%)> *** All tests completed OK *** Of course, before you can try audiotest in a zone, it must be installed: root@myzone:~# pkg install audio-utilities Packages to install: 1 Create boot environment: No DOWNLOAD PKGS FILES XFER (MB) Completed 1/1 6/6 0.4/0.4 PHASE ACTIONS Install Phase 20/20 PHASE ITEMS Package State Update Phase 1/1 Image State Update Phase 2/2 However, we'll need to do more than just install audiotest: root@myzone:~# audiotest /dev/mixer: No such file or directory The device file is missing from /dev. The audio devices also need to be added to the zone. For this we modify the zone configuration as follows: bleonard@solaris:~$ sudo zonecfg -z myzone Password: zonecfg:myzone> add device zonecfg:myzone:device> set match=/dev/audio* zonecfg:myzone:device> end zonecfg:myzone> add device zonecfg:myzone:device> set match=/dev/sound/* zonecfg:myzone:device> end zonecfg:myzone> add device zonecfg:myzone:device> set match=/dev/mixer* zonecfg:myzone:device> end zonecfg:myzone> add device zonecfg:myzone:device> set match=/dev/sndstat zonecfg:myzone:device> end zonecfg:myzone> verify zonecfg:myzone> exit Then reboot the zone: bleonard@solaris:~$ sudo zoneadm -z myzone reboot After which, audiotest should work: root@myzone:~# audiotest Sound subsystem and version: SunOS Audio 4.0 (0x00040003) Platform: SunOS 5.11 snv_151a i86pc *** Scanning sound adapter #1 *** /dev/sound/audio810:0dsp (audio engine 0): audio810#0 - Performing audio playback test... <left> ................OK <right> ...............OK <stereo> ..............OK <measured sample rate 48208.00 Hz (0.43%)> *** All tests completed OK *** You can also examine /dev/sndstat for additional information: root@myzone:~# cat /dev/sndstat SunOS Audio Framework Audio Devices: 0: audio810#0 Intel AC'97, ICH (DUPLEX) Mixers: 0: audio810#0 Intel AC'97, ICH AC'97 codec: SigmaTel STAC9700 However, when testing the sound from Firefox (from a user account other than root), such as this recent Flash presentation on Solaris availability, you may still be disappointed. This is simply a permissions problem, as the devices only have read and write permissions for root: root@myzone:~# ls -l /dev/audio* crw------- 1 root root 99, 3 Jul 1 10:21 /dev/audio crw------- 1 root root 99, 4 Jul 1 10:21 /dev/audioctl To address this: root@myzone:~# chmod 777 /dev/audio* root@myzone:~# chmod 777 /dev/sound/* And you should be all set.

  Read the article

• Caching DNS server (bind9.2) CPU usage is so so so high

  - by Gk.

  I have a caching-only dns server which get ~3k queries per second. Here is specs: Xeon dual-core 2,8GHz 4GB of RAM Centos 5x (kernel 2.6.18-164.15.1.el5PAE) bind 9.4.2 rndc status: recursive clients: 666/4900/5000 About 300 new queries (not in cache) per second. Bind always uses 100% on one core on single-thread config. After I recompiled it to multi-thread, it uses nearly 200% on two core :( No iowait, only sys and user. I searched around but didn't see any info about how bind use CPU. Why does it become bottleneck? One more thing, here is RAM usage: cat /proc/meminfo MemTotal: 4147876 kB MemFree: 1863972 kB Buffers: 143632 kB Cached: 372792 kB SwapCached: 0 kB Active: 1916804 kB Inactive: 276056 kB I've set max-cache-size to 0 to make sure bind can use as much RAM as it want, but it always stop at ~2GB. Since every second we got not cached queries so theoretically RAM must be exhausted but it wasn't. Do you have any idea? TIA, -Gk

  Read the article

• VMware + SQL Server - sqlserver.exe not using both CPU cores

  - by fistameeny

  Hi, I am working on a virtual machine that runs SQL Server Express (as part of Sage Line 50 Manufacturing). The details are as follows: Physical Server (host machine) - Intel Xeon Quad Core 2.1GHz - 4GB RAM - VMDK image stored on RAID-5 500GB SATA drives (7200RPM) - Running Ubuntu 10.04 Server 64 bit - VMware Server 2 Virtual Machine - Windows Small Business Server 2003 - Allocated 2 vCPU's and 2GB RAM - Using 100GB pre-allocated flat VMDK file The problem I have is that there is process that runs in SQL Server that is CPU intensive. On the old physical server that we migrated to the virtual machine from, this would utilise both CPU cores so the sqlserver.exe process would be running 100% on each of the CPU cores. On the virtual machine, it only seems to use one of the two CPU cores, meaning that the process is much slower to run. Question Is there a way to force SQL Server (sqlserver.exe process) to use both of the CPU cores, and distribute it's load between them? Is this a VMware setting that needs changing to allow processes to use both cores?

  Read the article

• smartOS HPC config suggestion

  - by Andrew B.

  I'm configuring a brand new HPC server and am interested in using SmartOS because of it's virtualization control and zfs features. Does this configuration make sense for a SmartOS HPC, or would you recommend an alternative? System Specs: 2x 8-core xeon 384 GB RAM 30 TB HDs with 2x512GB SSDs Uses: - zfs for serving data to different vms, and over the network; 1 SSD for L2ARC and 1 for ZIL - typically 1-2 ubuntu instances running R and custom C/C++ code My biggest concerns as a newbie to SmartOS and ZFS are: (1) will I get near-metal performance from ubuntu running on SmartOS if it is the only active vm? (2) how do I serve data from the global zfs pool to the containers and other network devices?

  Read the article

• VPS hang when one Virtual CPU usage is 100%

  - by garconcn

  We are using Xen Center to manage all of our cPanel VPS servers. The hardware has two CPUs(Intel(R) Xeon(R) CPU [email protected]) and 32GB memory. Each hardware has 4 cPanel VPS and each VPS has 8GB memory and 4 Virtual CPUS. Every one or two months, one of the VPS server will hang because one Virtual CPU usage is 100% and it couldn't release the CPU unless we use force reboot. We have 10 similar hardware, and this cause our server down almost every day. We have tried to avoid the Statistics Processing and Fantastico update during the night, but the problem still happens randomly. I can not find anything in the server log when it hangs. Any clue? Thank you.

  Read the article

• ESXi with non-headless VM

  - by Mike

  I'm going to receive a Xeon Server/Workstation soon and I was thinking about installing ESXi to host some server applications that I want (ex: SVN server, Web server, media server, etc). Most of these will be headless VM's. My question is: on top of all these headless VM's, is it possible for ESXi to have another VM that would be non-headless (so that it will output video through the VGA/DVI port)? Or are all VM's within ESXi only accessible through remote connections? I'll be using this non-headless VM like a regular workstation: browsing, development, media, gaming maybe. The other alternative I was thinking about is to install a very lightweight operating system and have the headless VM's running in Virtualbox. If it is possible to have have a non-headless VM, what would be the performance compared to a regular workstation? Noticeable or not when gaming?

  Read the article

• Video encoding is very slow on Amazon EC2 instance

  - by Timka

  We are using Amazon EC2 m1.xlarge instance for video re-encoding and it looks like the actual encoding process takes a very long time. For an average 250mb video file it takes about an hour to encode. Intance: m1.xlarge (Xeon E5645 x 15gb ram) Windows Server 2008 R2 64-bit AviSynth version 2.5 (32bit) + ffms2 plugin (FFmpegSource 1.21) FFmpeg SVN-r13712 libavutil 3213056 libavcodec 3356930 libavformat 3411456 libavdevice 3407872 Number of parallel jobs is 3 Average CPU utilization ~96% Update#1 Source video: mp4/h.264 Parameters for ffmpeg: --enable-memalign-hack --enable-avisynth --enable-libxvid --enable-libx264 + --enable-libgsm --enable-libfaac --enable-libfaad --enable-liba52 + --enable-libmp3lame --enable-libvorbis --enable-libtheora --enable-pthreads + --enable-swscale --enable-gpl Video files encoded to mp4/h.264 with the following extra command line options: -threads 0 -coder 0 -bf 0 -refs 1 -level 30 -maxrate 10000000 -bufsize 10000000

  Read the article

• Moving Exchange .EDB and .STM file to other partition

  - by Jorge Fernandez

  Im trying to move my exchange mailbox store to a new partition and i keep running into an error message saying: "cannot copy insufficient system resources exist to complete the requested service." The server is a Dell Poweredge 2850 with Dual Xeon Processors @ 3.00GHz and 4GB of ram. Running Win Server 2K3 R2 SP2 with Exchange 2K3 Standard. The Store is around 55GB any ideas. I want to get exchange on its on partition since I need to free up some space on the partition its currently on.

  Read the article

• what is the best setting for using lighttpd on 8G ram?

  - by user39639

  I have running 8GB ram and 8 x Xeon 3361 system! What is the best setting for running simultaneous connection! What is the maximum? Is setting like this correct? server.max-keep-alive-requests = 0 server.max-keep-alive-idle = 10 server.max-read-idle = 60 server.max-write-idle = 60 server.event-handler = "linux-sysepoll" server.max-fds = 2048 fastcgi.server = ( ".php" = ( "localhost" = ( "socket" = "/tmp/php-fastcgi.socket", "bin-path" = "/usr/bin/php-cgi", "max-procs" = 20, "bin-environment" = ( "PHP_FCGI_CHILDREN" = "40", "PHP_FCGI_MAX_REQUESTS" = "800" ), "broken-scriptfilename" = "enable" ) ) ) please help me!

  Read the article

• What would cause a query being ran from SSMS on local box to run slower then from remote box

  - by Racter

  When I run a simply query such as "Select Column1, Column2 from Table A" from within SSMS running on my production SQL Server the results seems to take extremely long (45Min). If I run the same query from my dev system’s SSMS connecting to the production SQL Server the results return within a few seconds (<60sec). One thing I have notices is if the system was just rebooted performance is good for a bit. It is hard to determine a time as I have had it start running slow very quickly after reboot but at most it performed good for 20min and then start acting up. Also, just restarting the SQL service does not resolve the issue or provide a temporary performance boost. Specs for Server are: Windows Server 2003, Enterprise Edition, SP2 4 X Intel Xeon 3.6GHz - 6GB System Memory Active/Active Cluster SQL Server 2005 SP2 (9.0.3239)

  Read the article

• Build vs Buy Webcast: November 8, 2012

  - by TammyBednar

  Date: Thursday, November 8, 2012, 1:00 PM EST You have a choice. Do you build your own database platform or buy a pre-engineered database appliance? Building a high-availability database platform presents unique challenges. Combining servers, storage, networking, OS, firmware, and database is complicated and raises important concerns: Will coordination between multiple SME’s delay deployment? Will it be reliable? Will it scale? Will routine maintenance consume precious IT-staff time? Ultimately, will it work? Enter the Oracle Database Appliance, a complete package of software, server, storage, and networking that’s engineered for simplicity. It saves time and money by simplifying deployment, maintenance, and support of database workloads. Plus, it’s based on Intel Xeon processors to ensure a high level of performance and scalability. Attend this Webcast to hear customer stories and discover how the Oracle Database Appliance: Increases ROI by reducing capital and operational expenses Frees IT staff by reducing deployment and management time from weeks to hours Takes the worry out of supporting mission critical application workloads Register For this WebCast today!

  Read the article

• Why is only one domU giving me the "time went backwards"?

  - by Paul Tomblin

  I'm setting up a replacement server for one that was working ok but is having hardware issues. The original server is i686 (Pentium III), but the new one is amd64 (Xeon). Everything is working fine, except one of the three domUs is giving me the "clocksource/0: Time went backwards" error. The Debian Wiki says what to do if all your domUs are getting this error, but not what to do if only one of them has. The "tenants" on my domUs have done some messing about with the systems I configured for them. I don't know what the user of that particular domU might have done.

  Read the article

• Is it safe to compress my Windows 7 %USERPROFILE%\AppData folder?

  - by Kev

  Having just read Scott Hanselman's latest blog entry, Guide to Freeing up Disk Space under Windows 7, he suggests turning on NTFS compression which I already do for a number of less travelled folders that contain static files such as downloads or images. However I am wondering if it's wise to turn on NTFS compression for the whole of my %USERPROFILE%\AppData folder? My system drive is a 128 GB SSD residing in a Dell Precision T5400 3Ghz Quad Core Xeon workstation so I ought not to notice the extra cycles used to compress and decompress files on their way to and from the disk. However would there be any good reasons not to do this? In fact could I safely compress the whole of my %USERPROFILE% folder?

  Read the article

• Workstation Build: Single 2.66ghz i-7 with overclock potential, OR Dual 5520 2.26ghz Xeons?

  - by jdc0589

  There are probably better places to ask this, but I am used to the excellent quality of responses on stack overflow. I am rebuilding my desktop in a few months. Aside from normal lightweight internet usage, I use it to run sqlServer, mySql, 1-2 Ubuntu VMs from time to time, lots of IDE's, and a media server for my PS3. The two possible setups cost the exact same amount (within $50) and would both have 12gb 1333mhz ddr3 ram and a 500gb RAID-0 array (250x2). Now, If I go with a single i-7 920 2.66ghz quadcore, I can easily overclock it to 3ghz, and would have cash leftover to get a 160gb ssd (either the ocz vertex or the 120gb intel) for the main OS/Program install drive. Else, I could get a dual lga1366 motherboard with two e5520 Xeon's (2.26ghz),just use the disks I already have. So, do I go for 8 physical/16 virtual cores at 2.26ghz (No overclocking on server boards) with normal disk I/O, or a 4 physical/8 virtual cores at 3.0ghz with really outstanding disk I/O?

  Read the article

• MySQL Optimizing

  - by Thoman

  Hello My web use an dedicated Intel(R) Xeon(R) CPU E5620 8core 12Gram Centos32bit/Driectadmin DISK SAS 80G Php-cgi This dedicated running one website Use wordpress 2.92(+plugin cache...) Database size 600MB only 100online But mywebsite runing very snow. please hep me config file my.cnf [mysqld] user=mysql key_buffer=128M set-variable = max_connections=1000 socket = /var/lib/mysql/mysql.sock key_buffer =32M table_cache = 1024 open_files_limit = 16344 join_buffer_size = 8M read_buffer_size = 8M sort_buffer_size = 8M tmp_table_size=512M read_rnd_buffer_size=8M max_heap_table_size=256M #myisam_sort_buffer_size=256M thread_cache_size=8 thread_cache=32 query_cache_type=1 query_cache_limit=1024M query_cache_size=1024M thread_concurrency = 16 wait_timeout = 10 connect_timeout = 10 interactive_timeout = 10 long_query_time=1 log-slow-queries = /var/log/mysqlslowqueries.log max_allowed_packet=32M skip-innodb [myisamchk] key_buffer = 64M sort_buffer = 64M read_buffer = 16M write_buffer = 16M [isamchk] key_buffer=64M sort_buffer=64M read_buffer=16M write_buffer=16M And apache

  Read the article

• I know this is a stupid question but... How many websites can my server potentially hold?

  - by Daniel Kindler

  Sorry for the "noob" question, but... About how many medium-sized websites with average traffic could this server hold? Just like the average website, kind of like a small business site. How many sites could this server hold, but still maintain nice, decent speed? PowerEdge R510 PE R510 Chassis for Up to Four 3.5" Cabled Hard Drives, LED edit Processor Intel® Xeon® E5630 2.53Ghz, 12M Cache,Turbo, HT, 1066MHz Max Mem edit Memory 8GB Memory (4x2GB), 1333MHz Single Ranked UDIMMs for 1 Procs, Optimized edit Operating System SUSE Linux Enterprise Server 10, SP3, Up To 32 CPU Lic, 1 YR Sub, DIB, Media edit Red Hat Enterprise Linux Licensing Hard Drives 250GB 7.2K RPM SATA 3.5" Cabled Hard Drive edit Hard Drives 1TB 7.2K RPM SATA 3.5" Cabled Hard Drive edit Hard Drives 2 X 2TB 7.2K RPM SATA 3.5in Cabled Hard Drive Hard Drive Configuration No RAID, Embedded SATA Controller for x4 Chassis edit Power Supply 480 Watt Non-Redundant Power Supply edit Thank you!

  Read the article

• How many websites can my server potentially hold?

  - by Daniel Kindler

  Sorry for the "noob" question, but... About how many medium-sized websites with average traffic could this server hold? Just like the average website, kind of like a small business site. How many sites could this server hold, but still maintain nice, decent speed? PowerEdge R510 PE R510 Chassis for Up to Four 3.5" Cabled Hard Drives, LED edit Processor Intel® Xeon® E5630 2.53Ghz, 12M Cache,Turbo, HT, 1066MHz Max Mem edit Memory 8GB Memory (4x2GB), 1333MHz Single Ranked UDIMMs for 1 Procs, Optimized edit Operating System SUSE Linux Enterprise Server 10, SP3, Up To 32 CPU Lic, 1 YR Sub, DIB, Media edit Red Hat Enterprise Linux Licensing Hard Drives 250GB 7.2K RPM SATA 3.5" Cabled Hard Drive edit Hard Drives 1TB 7.2K RPM SATA 3.5" Cabled Hard Drive edit Hard Drives 2 X 2TB 7.2K RPM SATA 3.5in Cabled Hard Drive Hard Drive Configuration No RAID, Embedded SATA Controller for x4 Chassis edit Power Supply 480 Watt Non-Redundant Power Supply edit Thank you!

  Read the article

• VPC on Windows 7 very slow network

  - by Shigg

  I have a Windows 2003 virtual machine which I use for website testing. I've just installed Windows 7 and am using the new version VPC (not xp mode). When I try to copy a file - I need to copy some big databases across - I get a file copy speed of about 20k per sec. Copying from one PC to another on the real network transfers files at 13mb per second. Any ideas what may be causing this? I've turned off differential network compression on win 7. The Virtual HD is on a seperate physical drive to the OS. Running Windows 7 64 bit on a dual xeon with 16gb ram and 10,000 rpm drives. Tried installing VPC 2007 but windows blocks it running saying its not compatable. Many thanks for any ideas.

  Read the article

• Performance problems - Jira running on Ubuntu over VMware ESX 4.0 maxing out all 4 vCPUs.

  - by Jack T

  We are running Jira on a box under VMware ESX 4.0 and performance is vaiable to say the least. The physical box has 12 Gig RAM and 4x Xeon 2.26 GHz CPUs. vCentre is telling us the CPUs are not maxed out at any time, RAM is fine too. When we issue a request to the host it sometimes maxes out all 4 vCPUs. Sometimes it's quick, sometimes very very slow. There doesn't seem to be a pattern. Any ideas?

  Read the article

• Question about server usage, big community platform [closed]

  - by Json

  Possible Duplicate: How do you do Load Testing and Capacity Planning for Web Sites I’m working on a community platform writen in PHP, MySQL. I have some questions about the server usage maybe someone can help me out. The community is based on JQuery with many ajax requests to update content. It makes 5 - 10 AJAX(Json, GET, POST) requests every 5 seconds, the requests fetch user data like user notifications and messages by doing mySQL queries. I wonder how a server will handle this when there are for more than 5000 users online. Then it will be 50.000 requests every 5 seconds, what kind of server you need to handle this? Or maybe even more, when there are 15.000 users online, 150.000 requests every 5 seconds. My webserver have the following specs. Xeon Quad 2048MB 5000GB traffic Will it be good enough, and for how many users? Anyone can help me out or know where to find such information, like make a calculation?

  Read the article

• 12.10 unable to install or even run from Live CD with nVidia GTX 580

  - by user99056

  I've used Ubuntu in the past (set up as web server, etc over in Iraq), so I'm not a 100% Linux Noob, however, I'm running into a brick wall here. I've got a machine I built when I got back to the US earlier this year, running Windows 7 Ultimate on it, and I've now got some free time and would like to transition over to Ubuntu full time. I've searched around in the forums, and there seems to be an issue with the nVidia graphics cards, so I've tried going to the EVGA site to see if I could find a new BIOS update for it and had no luck, so I'm back searching the forums here again and decided to just go ahead and post my question. My apologies if this is covered in another post and I was just unable to find it. I've found a few 'similar' posts, but nothing as bad as my issue. With the history aside, here is the actual detailed issue: I purchased a new SSD (Intel 520 SSD), arrived today, and I disconnect my old Windows 7 SSD. I had pre downloaded the ubuntu-12.10-desktop-amd64 earlier today and burned it to DVD. Upon inserting the Live CD into the computer and booting up, everything was fine up to the 'Run From Live CD' or 'Install Ubuntu Now' buttons. As I was sure I wanted to go ahead and make the switch, I selected the 'Install Now' from the right hand side. CD Spins up, black window pops up, and then the errors started: date/time GPU Lockup date/time Failed to idle channel 1 date/time PFIFO - playlist update failed date/time Failed to idle channel 2 date/time PFIFO - playlist update failed Thinking it might correct itself, I let it run and it would swap over to a GUI Screen that was locked up with major blurring/etc, then back to the command line with the errors. Eventually it said something along the lines of 'unknown status' and switched back to the GUI and froze. So, that's when I tried to see if I could find a BIOS upgrade for the nVidia GTX580 cards, and had no luck. So I thought, why not try to just run it from the Live CD and see if I can at least get a look at it, maybe if I could get it running try to do some sort of install from there and fix the driver issue. I rebooted, brought up the Live CD, and this time chose the left option / run from the CD. It brought me all the way in to the desktop, I saw my drives, the other icons, could move the mouse, etc for about 30 seconds and then it locked up completely. I've tried this a couple of times and get the same results every time. Hardware: Intel i7-3930K CPU @ 3.2GHz (12 CPUs) / MSI MS-7760 Motherboard / 32GB RAM / 2 x EVGA (nVidia) GeForce GTX 580 (4GB Ram each) So the question is: Is there any way to install 12.10 if you can't even get the Live CD to run (for more than 30 seconds)? My current hardware configuration is both of the GTX 580 cards have an SLI jumper on them, and I have 2 monitors on each card. (Ubuntu info obviously only shows on the main monitor from the failed installation and the attempt at running the Live CD). Perhaps opening the machine back up and removing the SLI Jumper and removing the other 3 monitors (so it only would have 1 video card with one monitor on it) would actually allow me to get 12.10 installed, then I could work on an nVidia Video Driver fix for the GTX 580, and then possibly hook up the other video card and monitors? Or is this something that they are currently aware of and may update with a future release in the next few days/weeks? Any thoughts or suggestions would be greatly appreciated, as I can't even try to fix the issue (assuming it is the nVidia drivers) if I can't even get it to install at all.

  Read the article

• my.ini optimization on Windows 2008 R2 VPS

  - by MKphpDev

  I have a vmware VPS running Windows Server 2008 R2 Enterprise that has performance issues with MySQL. Every few minutes, MySQL stall for few seconds then responed to queries. I'm sure that my.ini need to be optimized, but unfortunately, I don't have any idea of my.ini configuration. What's running on the server: 2 small wordpress blogs, 1 vbulletin forums (approx. 1.2 GB database, and increasing), small database for some sort of plug-ins (no more than 4000 records) Server Info: Processor: Intel Xeon X5550 @ 2.67GHz, RAM: 6 GB (memory useage never exceeded 2 GB), MySQL 5.5, PHP 5.3.10, IIS 7 current my.ini: [mysqld] default-storage-engine=INNODB sql-mode="STRICT_TRANS_TABLES,NO_AUTO_CREATE _USER,NO_ENGINE_SUBSTITUTION" max_connections=250 myisam_max_sort_file_size=20G innodb_additional_mem_pool_size=256M innodb_flush_log_at_trx_commit=1 innodb_log_buffer_size=8M innodb_buffer_pool_size=512MB innodb_log_file_size=128M innodb_thread_concurrency=10 key_buffer_size = 512M myisam_sort_buffer_size = 8M join_buffer_size = 256K read_buffer_size = 256K sort_buffer_size = 256K table_cache = 4000 thread_cache_size = 200 wait_timeout = 30 connect_timeout = 10 tmp_table_size = 32M max_allowed_packet = 1M max_connect_errors = 10000 query_cache_size = 16M query_cache_limit = 2M query_cache_type = 1 query_cache_min_res_unit = 1024 query_prealloc_size = 16384 query_alloc_block_size = 16384 skip-external-locking read_rnd_buffer_size=1M max_heap_table_size=16M thread_concurrency=8 [mysqld_safe] open_files_limit = 8192 [mysqldump] quick max_allowed_packet = 16M [myisamchk] key_buffer_size = 128M sort_buffer_size = 128M read_buffer = 2M write_buffer = 2M any help with that, please?

  Read the article

< Previous Page | 78 79 80 81 82 83 84 85 86 87 88 89  | Next Page >