Search Results

Search found 27946 results on 1118 pages for 'output buffer empty'.

Page 822/1118 | < Previous Page | 818 819 820 821 822 823 824 825 826 827 828 829  | Next Page >

• Load balancing with multiple gateways

  - by ttouch

  I have to different ISPs, each on each own network. The main connects via ethernet and the secondary via wifi. The two networks have no relation at all. I just connect to them simultaneously. The reason I want to load balance between them is to achieve higher Internet speeds. Note: I have no advanced network hardware. Just my pc and the two routers that I have no access... main network: if: eth0 gw: 192.168.178.1 my ip: 192.168.178.95 speed: 400 kbit/s secondary network: if: wlan0 gw: 192.168.1.1 my ip: 192.168.1.95 speed: 300 kbit/s A diagram to explain the situation: http://i.imgur.com/NZdsv.jpg I'm on Arch Linux x64. I use netcfg to configure the interfaces Configs: # /etc/network.d/main CONNECTION='ethernet' DESCRIPTION='A basic static ethernet connection using iproute' INTERFACE='eth0' IP='static' ADDR='192.168.178.95' # /etc/network.d/second CONNECTION='wireless' DESCRIPTION='A simple WEP encrypted wireless connection' INTERFACE='wlan0' SECURITY='wep' ESSID='wifi_essid' KEY='the_password' IP="static" ADDR='192.168.1.95' And I use iptables to load balance, rules: #!/bin/bash /usr/sbin/ip route flush table ISP1 2>/dev/null /usr/sbin/ip rule del fwmark 101 table ISP1 2>/dev/null /usr/sbin/ip route add table ISP1 192.168.178.0/24 dev eth0 proto kernel scope link src 192.168.178.95 metric 202 /usr/sbin/ip route add table ISP1 default via 192.168.178.1 dev eth0 /usr/sbin/ip rule add fwmark 101 table ISP1 /usr/sbin/ip route flush table ISP2 2>/dev/null /usr/sbin/ip rule del fwmark 102 table ISP2 2>/dev/null /usr/sbin/ip route add table ISP2 192.168.1.0/24 dev wlan0 proto kernel scope link src 192.168.1.95 metric 202 /usr/sbin/ip route add table ISP2 default via 192.168.1.1 dev wlan0 /usr/sbin/ip rule add fwmark 102 table ISP2 /usr/sbin/iptables -t mangle -F /usr/sbin/iptables -t mangle -X /usr/sbin/iptables -t mangle -N MARK-gw1 /usr/sbin/iptables -t mangle -A MARK-gw1 -m comment --comment 'send via 192.168.178.1' -j MARK --set-mark 101 /usr/sbin/iptables -t mangle -A MARK-gw1 -j CONNMARK --save-mark /usr/sbin/iptables -t mangle -A MARK-gw1 -j RETURN /usr/sbin/iptables -t mangle -N MARK-gw2 /usr/sbin/iptables -t mangle -A MARK-gw2 -m comment --comment 'send via 192.168.1.1' -j MARK --set-mark 102 /usr/sbin/iptables -t mangle -A MARK-gw2 -j CONNMARK --save-mark /usr/sbin/iptables -t mangle -A MARK-gw2 -j RETURN /usr/sbin/iptables -t mangle -A PREROUTING -j CONNMARK --restore-mark /usr/sbin/iptables -t mangle -A PREROUTING -m comment --comment "this stream is already marked; escape early" -m mark ! --mark 0 -j ACCEPT /usr/sbin/iptables -t mangle -A PREROUTING -m comment --comment 'prevent asynchronous routing' -i eth0 -m conntrack --ctstate NEW -j MARK-gw1 /usr/sbin/iptables -t mangle -A PREROUTING -m comment --comment 'prevent asynchronous routing' -i wlan0 -m conntrack --ctstate NEW -j MARK-gw2 /usr/sbin/iptables -t mangle -N DEF_POL /usr/sbin/iptables -t mangle -A DEF_POL -m comment --comment 'default balancing' -p tcp -m conntrack --ctstate ESTABLISHED,RELATED -j CONNMARK --restore-mark /usr/sbin/iptables -t mangle -A DEF_POL -m comment --comment 'default balancing' -p udp -m conntrack --ctstate ESTABLISHED,RELATED -j CONNMARK --restore-mark /usr/sbin/iptables -t mangle -A DEF_POL -m comment --comment 'balance gw1 tcp' -p tcp -m conntrack --ctstate NEW -m statistic --mode nth --every 2 --packet 0 -j MARK-gw1 /usr/sbin/iptables -t mangle -A DEF_POL -m comment --comment 'balance gw1 tcp' -p tcp -m conntrack --ctstate NEW -m statistic --mode nth --every 2 --packet 0 -j ACCEPT /usr/sbin/iptables -t mangle -A DEF_POL -m comment --comment 'balance gw2 tcp' -p tcp -m conntrack --ctstate NEW -m statistic --mode nth --every 2 --packet 1 -j MARK-gw2 /usr/sbin/iptables -t mangle -A DEF_POL -m comment --comment 'balance gw2 tcp' -p tcp -m conntrack --ctstate NEW -m statistic --mode nth --every 2 --packet 1 -j ACCEPT /usr/sbin/iptables -t mangle -A DEF_POL -m comment --comment 'balance gw1 udp' -p udp -m conntrack --ctstate NEW -m statistic --mode nth --every 2 --packet 0 -j MARK-gw1 /usr/sbin/iptables -t mangle -A DEF_POL -m comment --comment 'balance gw1 udp' -p udp -m conntrack --ctstate NEW -m statistic --mode nth --every 2 --packet 0 -j ACCEPT /usr/sbin/iptables -t mangle -A DEF_POL -m comment --comment 'balance gw2 udp' -p udp -m conntrack --ctstate NEW -m statistic --mode nth --every 2 --packet 1 -j MARK-gw2 /usr/sbin/iptables -t mangle -A DEF_POL -m comment --comment 'balance gw2 udp' -p udp -m conntrack --ctstate NEW -m statistic --mode nth --every 2 --packet 1 -j ACCEPT /usr/sbin/iptables -t mangle -A PREROUTING -j DEF_POL /usr/sbin/iptables -t nat -A POSTROUTING -m comment --comment 'snat outbound eth0' -o eth0 -s 192.168.0.0/16 -m mark --mark 101 -j SNAT --to-source 192.168.178.95 /usr/sbin/iptables -t nat -A POSTROUTING -m comment --comment 'snat outbound wlan0' -o wlan0 -s 192.168.0.0/16 -m mark --mark 102 -j SNAT --to-source 192.168.1.95 /usr/sbin/ip route flush cache (this script was made by fukawi2, I don't know how to use iptables) but I have no Internet connection... output of iptables -t mangle -nvL Chain PREROUTING (policy ACCEPT 1254K packets, 1519M bytes) pkts bytes target prot opt in out source destination 1278K 1535M CONNMARK all -- * * 0.0.0.0/0 0.0.0.0/0 CONNMARK restore 21532 15M ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 /* this stream is already marked; escape early */ mark match ! 0x0 582 72579 MARK-gw1 all -- eth0 * 0.0.0.0/0 0.0.0.0/0 /* prevent asynchronous routing */ ctstate NEW 2376 696K MARK-gw2 all -- wlan0 * 0.0.0.0/0 0.0.0.0/0 /* prevent asynchronous routing */ ctstate NEW 1257K 1520M DEF_POL all -- * * 0.0.0.0/0 0.0.0.0/0 Chain INPUT (policy ACCEPT 1276K packets, 1535M bytes) pkts bytes target prot opt in out source destination Chain FORWARD (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination Chain OUTPUT (policy ACCEPT 870K packets, 97M bytes) pkts bytes target prot opt in out source destination Chain POSTROUTING (policy ACCEPT 870K packets, 97M bytes) pkts bytes target prot opt in out source destination Chain DEF_POL (1 references) pkts bytes target prot opt in out source destination 1236K 1517M CONNMARK tcp -- * * 0.0.0.0/0 0.0.0.0/0 /* default balancing */ ctstate RELATED,ESTABLISHED CONNMARK restore 15163 2041K CONNMARK udp -- * * 0.0.0.0/0 0.0.0.0/0 /* default balancing */ ctstate RELATED,ESTABLISHED CONNMARK restore 555 33176 MARK-gw1 tcp -- * * 0.0.0.0/0 0.0.0.0/0 /* balance gw1 tcp */ ctstate NEW statistic mode nth every 2 555 33176 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 /* balance gw1 tcp */ ctstate NEW statistic mode nth every 2 277 16516 MARK-gw2 tcp -- * * 0.0.0.0/0 0.0.0.0/0 /* balance gw2 tcp */ ctstate NEW statistic mode nth every 2 packet 1 277 16516 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 /* balance gw2 tcp */ ctstate NEW statistic mode nth every 2 packet 1 1442 384K MARK-gw1 udp -- * * 0.0.0.0/0 0.0.0.0/0 /* balance gw1 udp */ ctstate NEW statistic mode nth every 2 1442 384K ACCEPT udp -- * * 0.0.0.0/0 0.0.0.0/0 /* balance gw1 udp */ ctstate NEW statistic mode nth every 2 720 189K MARK-gw2 udp -- * * 0.0.0.0/0 0.0.0.0/0 /* balance gw2 udp */ ctstate NEW statistic mode nth every 2 packet 1 720 189K ACCEPT udp -- * * 0.0.0.0/0 0.0.0.0/0 /* balance gw2 udp */ ctstate NEW statistic mode nth every 2 packet 1 Chain MARK-gw1 (3 references) pkts bytes target prot opt in out source destination 2579 490K MARK all -- * * 0.0.0.0/0 0.0.0.0/0 /* send via 192.168.178.1 */ MARK set 0x65 2579 490K CONNMARK all -- * * 0.0.0.0/0 0.0.0.0/0 CONNMARK save 2579 490K RETURN all -- * * 0.0.0.0/0 0.0.0.0/0 Chain MARK-gw2 (3 references) pkts bytes target prot opt in out source destination 3373 901K MARK all -- * * 0.0.0.0/0 0.0.0.0/0 /* send via 192.168.1.1 */ MARK set 0x66 3373 901K CONNMARK all -- * * 0.0.0.0/0 0.0.0.0/0 CONNMARK save 3373 901K RETURN all -- * * 0.0.0.0/0 0.0.0.0/0

  Read the article

• Why doesn't pppd over ssh work here? Why can't I kill pppd?

  - by Peter V. Mørch

  I'm trying to setup a simple ppp tunnel over ssh. It works on several machines just fine. But on one machine, pppd gets "stuck": > pgrep pppd | xargs ps up USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND root 4178 0.0 0.1 3020 1088 pts/1 Ds+ 05:28 0:00 /usr/sbin/pppd Any attempt to kill it (even sudo kill -9 4178) has no effect that I can see. strace -p 4178 also hangs similarly. After it has been started for a while, I start getting messages in dmesg like shown below. It is started like so from another machine: ssh -t root@server /usr/sbin/pppd passive noauth When I do this to one of the machines that work, the remote end's pppd spits out garbage/binary data to the console (as expected). When I do it to the one that fails, I get no output from pppd, but the ssh session eventually times out. If I instead ssh to the machine, and then run /usr/sbin/pppd passive noauth in a separate step I also get the expected binary output. I now have a couple of questions: What could be up with the one machine where pppd fails? I don't even know where to start looking... What could be the difference between ssh -t root@server /usr/sbin/pppd passive noauth in a single step and ssh root@server and /usr/sbin/pppd passive noauth in two steps? How can it be that I can't kill the process even with sudo kill -9? The only way I know is to reboot. (I've tried searching for something similar but didn't get anywhere so I'm sorry I don't have any more leads) Any ideas? The problem machine runs in debian on VMware "hardware" (as do the ones that work) and it exhibits the problem when cloned and on both debian lenny (original) and squeeze (after upgrade) dmesg entries: [ 1198.727248] INFO: task pppd:4178 blocked for more than 120 seconds. [ 1198.727507] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 1198.727904] pppd D ece2dc9c 0 4178 4174 0x00000004 [ 1198.727908] 00000098 00000082 f2503520 ece2dc9c 0000b1e7 00000000 c148d1c0 c148d1c0 [ 1198.727913] f2a06100 f6e071c0 00000000 ece2dc18 f5cd07e0 00000000 ece2d400 ece2dc9d [ 1198.727918] 00c52300 ece2dcbc f67bfef8 ec98e480 f291cec0 00000000 c10cf5b0 c10dfd21 [ 1198.727923] Call Trace: [ 1198.727926] [<c10cf5b0>] ? nameidata_to_filp+0x37/0x41 [ 1198.727929] [<c10dfd21>] ? dput+0x21/0xb7 [ 1198.727932] [<c11cfecc>] ? tty_ldisc_ref_wait+0x5f/0x76 [ 1198.727935] [<c104de7a>] ? wake_up_bit+0x5c/0x5c [ 1198.727938] [<c11cb91b>] ? tty_ioctl+0x85f/0x8ba [ 1198.727941] [<c10fec18>] ? do_lock_file_wait+0x3d/0xd9 [ 1198.727944] [<c1162c97>] ? _copy_from_user+0x2b/0x102 [ 1198.727946] [<c11cb0bc>] ? tty_check_change+0xb9/0xb9 [ 1198.727949] [<c10dbeb7>] ? do_vfs_ioctl+0x485/0x4c7 [ 1198.727952] [<c10db59a>] ? do_fcntl+0x24f/0x3a2 [ 1198.727954] [<c10dbf3a>] ? sys_ioctl+0x41/0x58 [ 1198.727957] [<c12c6a1f>] ? sysenter_do_call+0x12/0x28 [ 1318.457225] INFO: task sshd:4174 blocked for more than 120 seconds. [ 1318.457500] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 1318.457896] sshd D f25024cc 0 4174 2393 0x00000000 [ 1318.457901] 00000098 00000086 f2a06940 f25024cc 0000b246 00000000 c148d1c0 c148d1c0 [ 1318.457906] f2503520 f6e071c0 00000000 3f056585 0000000f ece2d4bc 3f056585 f2503520 [ 1318.457911] ec98bb38 ec98bbdc 00000000 00000000 00000000 c12c09b5 f2503520 c10327cb [ 1318.457916] Call Trace: [ 1318.457926] [<c12c09b5>] ? schedule_hrtimeout_range_clock+0x3c/0xd9 [ 1318.457931] [<c10327cb>] ? try_to_wake_up+0x13f/0x13f [ 1318.457935] [<c11cfecc>] ? tty_ldisc_ref_wait+0x5f/0x76 [ 1318.457940] [<c104de7a>] ? wake_up_bit+0x5c/0x5c [ 1318.457943] [<c11c9ad3>] ? tty_poll+0x32/0x5e [ 1318.457947] [<c10dd4d5>] ? do_select+0x2a1/0x42e [ 1318.457950] [<c10dcb83>] ? poll_freewait+0x69/0x69 [ 1318.457953] [<c10dcc25>] ? __pollwait+0xa2/0xa2 [ 1318.457955] [<c10dcc25>] ? __pollwait+0xa2/0xa2 [ 1318.457958] [<c10dcc25>] ? __pollwait+0xa2/0xa2 [ 1318.457960] [<c10dcc25>] ? __pollwait+0xa2/0xa2 [ 1318.457963] [<c10dcc25>] ? __pollwait+0xa2/0xa2 [ 1318.457965] [<c10dcc25>] ? __pollwait+0xa2/0xa2 [ 1318.457968] [<c10dcc25>] ? __pollwait+0xa2/0xa2 [ 1318.457971] [<c10429c2>] ? lock_timer_base+0x19/0x35 [ 1318.457974] [<c1042eb5>] ? __mod_timer+0x10c/0x116 [ 1318.457977] [<c1042f89>] ? mod_timer+0x69/0x6e [ 1318.457981] [<c121325d>] ? sk_reset_timer+0xc/0x16 [ 1318.457984] [<c1252f57>] ? tcp_event_new_data_sent+0x66/0x6b [ 1318.457987] [<c1255b85>] ? tcp_write_xmit+0x7a7/0x86a [ 1318.457990] [<c121760d>] ? __alloc_skb+0x50/0xfd [ 1318.457994] [<c12c12bc>] ? _raw_spin_lock_bh+0x8/0x1e [ 1318.457996] [<c1212e98>] ? release_sock+0x10/0xc4 [ 1318.457999] [<c124b543>] ? tcp_sendmsg+0x6dd/0x7b7 [ 1318.458003] [<c1162c97>] ? _copy_from_user+0x2b/0x102 [ 1318.458006] [<c10dd7a0>] ? core_sys_select+0x13e/0x1c3 [ 1318.458009] [<c12102a3>] ? sock_aio_write+0xc0/0xd4 [ 1318.458012] [<c10d0655>] ? do_sync_write+0xa0/0xe4 [ 1318.458016] [<c10b141c>] ? handle_mm_fault+0x222/0x238 [ 1318.458019] [<c10f6096>] ? fsnotify+0x1de/0x1f9 [ 1318.458022] [<c10dd9e8>] ? sys_select+0x6e/0x8f [ 1318.458024] [<c10d105e>] ? sys_write+0x3c/0x63 [ 1318.458028] [<c12c6a1f>] ? sysenter_do_call+0x12/0x28

  Read the article

• PC hangs and reboots from time to time

  - by Bevor

  Hello, I have a very strange problem: Since I have my new PC, I have always had problems with it. From time to time the computer freezes for some seconds and suddendly reboots by itself. I've had this problem since Ubuntu 9.10. The same with 10.04 and 10.10. That's why I don't think it's a software failure because the problem persist too long. It doesn't have anything to do with what I'm doing at this time. Sometimes I listen to music, sometimes I only use Firefox, sometimes I'm running 2 or 3 VMs, sometimes I watch DVD. So it's not isolatable. I could freeze once a day or once a week. I put the PC to the vendor twice(!). The first time they changed my power supply but the problem persisted. The second time they told me that they made some heavy performance tests 50 hours long but they didn't find anything. (How can that be that I have daily freezes with normal usage). The vendor didn't check the hard discs because they used their own disc with Windows. (So they never checked the Linux installation). Yesterday I made some intensive hard disc scans with "SMART" but no errors were found. I ran memtest for 3 times but no errors found. I already had this problem in my old flat, so I doubt that I has something to do with current fluctuation. I already tried another electrical socket and changed to connector strip but the problem persists. At the moment I removed 2 of the RAMs (2x 2GB). In all I have 6GB, 2x2GB and 2x1GB. Could this difference maybe be a problem? Here is a list of my components. I hope that anybody find something I didn't think about yet. And here a list of my components: 1x AMD Phenom II X4 965 Black Edition, 3,4Ghz, Quad Core, S-AM3, Boxed 2x DDR3-RAM 2048MB, PC3-1333 Mhz, CL9, Kingston ValueRAM 2x DDR3-RAM 1024MB, PC3-1333 Mhz, CL9, Kingston ValueRAM 2x SATA II Seagate Barracuda 7200.12, 1TB 32MB Cache = RAID 1 1x DVD ROM SATA LG DH16NSR, 16x/52x 1x DVD-+R/-+RW SATA LG GH-22NS50 1x Cardreader 18in1 1x PCI-E 2.0 GeForce GTS 250, Retail, 1024MB 1x Power Supply ATX 400 Watt, CHIEFTEC APS-400S, 80 Plus 1x Network card PCI Intel PRO/1000GT 10/100/1000 MBit 1x Mainboard Socket-AM3 ASUS M4A79XTD EVO, ATX lshw: description: Desktop Computer product: System Product Name vendor: System manufacturer version: System Version serial: System Serial Number width: 64 bits capabilities: smbios-2.5 dmi-2.5 vsyscall64 vsyscall32 configuration: boot=normal chassis=desktop uuid=80E4001E-8C00-002C-AA59-E0CB4EBAC29A *-core description: Motherboard product: M4A79XTD EVO vendor: ASUSTeK Computer INC. physical id: 0 version: Rev X.0X serial: MT709CK11101196 slot: To Be Filled By O.E.M. *-firmware description: BIOS vendor: American Megatrends Inc. physical id: 0 version: 0704 (11/25/2009) size: 64KiB capacity: 960KiB capabilities: isa pci pnp apm upgrade shadowing escd cdboot bootselect socketedrom edd int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int14serial int17printer int10video acpi usb ls120boot zipboot biosbootspecification *-cpu description: CPU product: AMD Phenom(tm) II X4 965 Processor vendor: Advanced Micro Devices [AMD] physical id: 4 bus info: cpu@0 version: AMD Phenom(tm) II X4 965 Processor serial: To Be Filled By O.E.M. slot: AM3 size: 800MHz capacity: 3400MHz width: 64 bits clock: 200MHz capabilities: fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp x86-64 3dnowext 3dnow constant_tsc rep_good nonstop_tsc extd_apicid pni monitor cx16 popcnt lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt npt lbrv svm_lock nrip_save cpufreq *-cache:0 description: L1 cache physical id: 5 slot: L1-Cache size: 512KiB capacity: 512KiB capabilities: pipeline-burst internal varies data *-cache:1 description: L2 cache physical id: 6 slot: L2-Cache size: 2MiB capacity: 2MiB capabilities: pipeline-burst internal varies unified *-cache:2 description: L3 cache physical id: 7 slot: L3-Cache size: 6MiB capacity: 6MiB capabilities: pipeline-burst internal varies unified *-memory description: System Memory physical id: 36 slot: System board or motherboard size: 2GiB *-bank:0 description: DIMM Synchronous 1333 MHz (0.8 ns) product: ModulePartNumber00 vendor: Manufacturer00 physical id: 0 serial: SerNum00 slot: DIMM0 size: 1GiB width: 64 bits clock: 1333MHz (0.8ns) *-bank:1 description: DIMM Synchronous 1333 MHz (0.8 ns) product: ModulePartNumber01 vendor: Manufacturer01 physical id: 1 serial: SerNum01 slot: DIMM1 size: 1GiB width: 64 bits clock: 1333MHz (0.8ns) *-bank:2 description: DIMM [empty] product: ModulePartNumber02 vendor: Manufacturer02 physical id: 2 serial: SerNum02 slot: DIMM2 *-bank:3 description: DIMM [empty] product: ModulePartNumber03 vendor: Manufacturer03 physical id: 3 serial: SerNum03 slot: DIMM3 *-pci:0 description: Host bridge product: RD780 Northbridge only dual slot PCI-e_GFX and HT1 K8 part vendor: ATI Technologies Inc physical id: 100 bus info: pci@0000:00:00.0 version: 00 width: 32 bits clock: 66MHz *-pci:0 description: PCI bridge product: RD790 PCI to PCI bridge (external gfx0 port A) vendor: ATI Technologies Inc physical id: 2 bus info: pci@0000:00:02.0 version: 00 width: 32 bits clock: 33MHz capabilities: pci pm pciexpress msi ht normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:40 ioport:a000(size=4096) memory:f8000000-fbbfffff ioport:d0000000(size=268435456) *-display description: VGA compatible controller product: G92 [GeForce GTS 250] vendor: nVidia Corporation physical id: 0 bus info: pci@0000:01:00.0 version: a2 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vga_controller bus_master cap_list rom configuration: driver=nvidia latency=0 resources: irq:18 memory:fa000000-faffffff memory:d0000000-dfffffff memory:f8000000-f9ffffff ioport:ac00(size=128) memory:fbbe0000-fbbfffff *-pci:1 description: PCI bridge product: RD790 PCI to PCI bridge (PCI express gpp port C) vendor: ATI Technologies Inc physical id: 6 bus info: pci@0000:00:06.0 version: 00 width: 32 bits clock: 33MHz capabilities: pci pm pciexpress msi ht normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:41 ioport:b000(size=4096) memory:fbc00000-fbcfffff ioport:f6f00000(size=1048576) *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:02:00.0 logical name: eth0 version: 03 serial: e0:cb:4e:ba:c2:9a size: 10MB/s capacity: 1GB/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half latency=0 link=no multicast=yes port=MII speed=10MB/s resources: irq:45 ioport:b800(size=256) memory:f6fff000-f6ffffff memory:f6ff8000-f6ffbfff memory:fbcf0000-fbcfffff *-pci:2 description: PCI bridge product: RD790 PCI to PCI bridge (PCI express gpp port D) vendor: ATI Technologies Inc physical id: 7 bus info: pci@0000:00:07.0 version: 00 width: 32 bits clock: 33MHz capabilities: pci pm pciexpress msi ht normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:42 ioport:c000(size=4096) memory:fbd00000-fbdfffff *-firewire description: FireWire (IEEE 1394) product: VT6315 Series Firewire Controller vendor: VIA Technologies, Inc. physical id: 0 bus info: pci@0000:03:00.0 version: 00 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress ohci bus_master cap_list configuration: driver=firewire_ohci latency=0 resources: irq:19 memory:fbdff800-fbdfffff ioport:c800(size=256) *-pci:3 description: PCI bridge product: RD790 PCI to PCI bridge (PCI express gpp port E) vendor: ATI Technologies Inc physical id: 9 bus info: pci@0000:00:09.0 version: 00 width: 32 bits clock: 33MHz capabilities: pci pm pciexpress msi ht normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:43 ioport:d000(size=4096) memory:fbe00000-fbefffff *-ide description: IDE interface product: 88SE6121 SATA II Controller vendor: Marvell Technology Group Ltd. physical id: 0 bus info: pci@0000:04:00.0 version: b2 width: 32 bits clock: 33MHz capabilities: ide pm msi pciexpress bus_master cap_list configuration: driver=pata_marvell latency=0 resources: irq:17 ioport:dc00(size=8) ioport:d880(size=4) ioport:d800(size=8) ioport:d480(size=4) ioport:d400(size=16) memory:fbeffc00-fbefffff *-storage description: SATA controller product: SB700/SB800 SATA Controller [IDE mode] vendor: ATI Technologies Inc physical id: 11 bus info: pci@0000:00:11.0 logical name: scsi0 logical name: scsi2 version: 00 width: 32 bits clock: 66MHz capabilities: storage msi ahci_1.0 bus_master cap_list emulated configuration: driver=ahci latency=64 resources: irq:44 ioport:9000(size=8) ioport:8000(size=4) ioport:7000(size=8) ioport:6000(size=4) ioport:5000(size=16) memory:f7fffc00-f7ffffff *-disk:0 description: ATA Disk product: ST31000528AS vendor: Seagate physical id: 0 bus info: scsi@0:0.0.0 logical name: /dev/sda version: CC38 serial: 9VP3WD9Z size: 931GiB (1TB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 signature=000ad206 *-volume:0 UNCLAIMED description: Linux filesystem partition vendor: Linux physical id: 1 bus info: scsi@0:0.0.0,1 version: 1.0 serial: 81839235-21ea-4853-90a4-814779f49000 size: 972MiB capacity: 972MiB capabilities: primary ext2 initialized configuration: filesystem=ext2 modified=2010-12-06 18:32:58 mounted=2010-11-01 07:05:10 state=unknown *-volume:1 UNCLAIMED description: Linux swap volume physical id: 2 bus info: scsi@0:0.0.0,2 version: 1 serial: 22b881d5-6f5c-484d-94e8-e231896fa91b size: 486MiB capacity: 486MiB capabilities: primary nofs swap initialized configuration: filesystem=swap pagesize=4096 *-volume:2 UNCLAIMED description: EXT3 volume vendor: Linux physical id: 3 bus info: scsi@0:0.0.0,3 version: 1.0 serial: ad5b0daf-11e8-4f8f-8598-4e89da9c0d84 size: 47GiB capacity: 47GiB capabilities: primary journaled extended_attributes large_files recover ext3 ext2 initialized configuration: created=2010-02-16 20:42:29 filesystem=ext3 modified=2010-11-29 17:02:34 mounted=2010-12-06 18:32:50 state=clean *-volume:3 UNCLAIMED description: Extended partition physical id: 4 bus info: scsi@0:0.0.0,4 size: 882GiB capacity: 882GiB capabilities: primary extended partitioned partitioned:extended *-logicalvolume UNCLAIMED description: Linux filesystem partition physical id: 5 capacity: 882GiB *-disk:1 description: ATA Disk product: ST31000528AS vendor: Seagate physical id: 1 bus info: scsi@2:0.0.0 logical name: /dev/sdb version: CC38 serial: 9VP3SCPF size: 931GiB (1TB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 signature=000ad206 *-volume:0 UNCLAIMED description: Linux filesystem partition vendor: Linux physical id: 1 bus info: scsi@2:0.0.0,1 version: 1.0 serial: 81839235-21ea-4853-90a4-814779f49000 size: 972MiB capacity: 972MiB capabilities: primary ext2 initialized configuration: filesystem=ext2 modified=2010-12-06 18:32:58 mounted=2010-11-01 07:05:10 state=unknown *-volume:1 UNCLAIMED description: Linux swap volume physical id: 2 bus info: scsi@2:0.0.0,2 version: 1 serial: 22b881d5-6f5c-484d-94e8-e231896fa91b size: 486MiB capacity: 486MiB capabilities: primary nofs swap initialized configuration: filesystem=swap pagesize=4096 *-volume:2 UNCLAIMED description: EXT3 volume vendor: Linux physical id: 3 bus info: scsi@2:0.0.0,3 version: 1.0 serial: ad5b0daf-11e8-4f8f-8598-4e89da9c0d84 size: 47GiB capacity: 47GiB capabilities: primary journaled extended_attributes large_files recover ext3 ext2 initialized configuration: created=2010-02-16 20:42:29 filesystem=ext3 modified=2010-11-29 17:02:34 mounted=2010-12-06 18:32:50 state=clean *-volume:3 UNCLAIMED description: Extended partition physical id: 4 bus info: scsi@2:0.0.0,4 size: 882GiB capacity: 882GiB capabilities: primary extended partitioned partitioned:extended *-logicalvolume UNCLAIMED description: Linux filesystem partition physical id: 5 capacity: 882GiB *-usb:0 description: USB Controller product: SB700/SB800 USB OHCI0 Controller vendor: ATI Technologies Inc physical id: 12 bus info: pci@0000:00:12.0 version: 00 width: 32 bits clock: 66MHz capabilities: ohci bus_master configuration: driver=ohci_hcd latency=64 resources: irq:16 memory:f7ffd000-f7ffdfff *-usb:1 description: USB Controller product: SB700 USB OHCI1 Controller vendor: ATI Technologies Inc physical id: 12.1 bus info: pci@0000:00:12.1 version: 00 width: 32 bits clock: 66MHz capabilities: ohci bus_master configuration: driver=ohci_hcd latency=64 resources: irq:16 memory:f7ffe000-f7ffefff *-usb:2 description: USB Controller product: SB700/SB800 USB EHCI Controller vendor: ATI Technologies Inc physical id: 12.2 bus info: pci@0000:00:12.2 version: 00 width: 32 bits clock: 66MHz capabilities: pm debug ehci bus_master cap_list configuration: driver=ehci_hcd latency=64 resources: irq:17 memory:f7fff800-f7fff8ff *-usb:3 description: USB Controller product: SB700/SB800 USB OHCI0 Controller vendor: ATI Technologies Inc physical id: 13 bus info: pci@0000:00:13.0 version: 00 width: 32 bits clock: 66MHz capabilities: ohci bus_master configuration: driver=ohci_hcd latency=64 resources: irq:18 memory:f7ffb000-f7ffbfff *-usb:4 description: USB Controller product: SB700 USB OHCI1 Controller vendor: ATI Technologies Inc physical id: 13.1 bus info: pci@0000:00:13.1 version: 00 width: 32 bits clock: 66MHz capabilities: ohci bus_master configuration: driver=ohci_hcd latency=64 resources: irq:18 memory:f7ffc000-f7ffcfff *-usb:5 description: USB Controller product: SB700/SB800 USB EHCI Controller vendor: ATI Technologies Inc physical id: 13.2 bus info: pci@0000:00:13.2 version: 00 width: 32 bits clock: 66MHz capabilities: pm debug ehci bus_master cap_list configuration: driver=ehci_hcd latency=64 resources: irq:19 memory:f7fff400-f7fff4ff *-serial UNCLAIMED description: SMBus product: SBx00 SMBus Controller vendor: ATI Technologies Inc physical id: 14 bus info: pci@0000:00:14.0 version: 3c width: 32 bits clock: 66MHz capabilities: ht cap_list configuration: latency=0 *-ide description: IDE interface product: SB700/SB800 IDE Controller vendor: ATI Technologies Inc physical id: 14.1 bus info: pci@0000:00:14.1 logical name: scsi5 version: 00 width: 32 bits clock: 66MHz capabilities: ide msi bus_master cap_list emulated configuration: driver=pata_atiixp latency=64 resources: irq:16 ioport:1f0(size=8) ioport:3f6 ioport:170(size=8) ioport:376 ioport:ff00(size=16) *-cdrom:0 description: DVD reader product: DVDROM DH16NS30 vendor: HL-DT-ST physical id: 0.0.0 bus info: scsi@5:0.0.0 logical name: /dev/cdrom1 logical name: /dev/dvd1 logical name: /dev/scd0 logical name: /dev/sr0 version: 1.00 capabilities: removable audio dvd configuration: ansiversion=5 status=nodisc *-cdrom:1 description: DVD-RAM writer product: DVDRAM GH22NS50 vendor: HL-DT-ST physical id: 0.1.0 bus info: scsi@5:0.1.0 logical name: /dev/cdrom logical name: /dev/cdrw logical name: /dev/dvd logical name: /dev/dvdrw logical name: /dev/scd1 logical name: /dev/sr1 version: TN02 capabilities: removable audio cd-r cd-rw dvd dvd-r dvd-ram configuration: ansiversion=5 status=nodisc *-multimedia description: Audio device product: SBx00 Azalia (Intel HDA) vendor: ATI Technologies Inc physical id: 14.2 bus info: pci@0000:00:14.2 version: 00 width: 64 bits clock: 33MHz capabilities: pm bus_master cap_list configuration: driver=HDA Intel latency=64 resources: irq:16 memory:f7ff4000-f7ff7fff *-isa description: ISA bridge product: SB700/SB800 LPC host controller vendor: ATI Technologies Inc physical id: 14.3 bus info: pci@0000:00:14.3 version: 00 width: 32 bits clock: 66MHz capabilities: isa bus_master configuration: latency=0 *-pci:4 description: PCI bridge product: SBx00 PCI to PCI Bridge vendor: ATI Technologies Inc physical id: 14.4 bus info: pci@0000:00:14.4 version: 00 width: 32 bits clock: 66MHz capabilities: pci subtractive_decode bus_master resources: ioport:e000(size=4096) memory:fbf00000-fbffffff *-network description: Ethernet interface product: 82541PI Gigabit Ethernet Controller vendor: Intel Corporation physical id: 5 bus info: pci@0000:05:05.0 logical name: eth1 version: 05 serial: 00:1b:21:56:f3:60 size: 100MB/s capacity: 1GB/s width: 32 bits clock: 66MHz capabilities: pm pcix bus_master cap_list rom ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=e1000 driverversion=7.3.21-k6-NAPI duplex=full firmware=N/A ip=192.168.1.2 latency=64 link=yes mingnt=255 multicast=yes port=twisted pair speed=100MB/s resources: irq:20 memory:fbfe0000-fbffffff memory:fbfc0000-fbfdffff ioport:ec00(size=64) memory:fbfa0000-fbfbffff *-usb:6 description: USB Controller product: SB700/SB800 USB OHCI2 Controller vendor: ATI Technologies Inc physical id: 14.5 bus info: pci@0000:00:14.5 version: 00 width: 32 bits clock: 66MHz capabilities: ohci bus_master configuration: driver=ohci_hcd latency=64 resources: irq:18 memory:f7ffa000-f7ffafff *-pci:1 description: Host bridge product: Family 10h Processor HyperTransport Configuration vendor: Advanced Micro Devices [AMD] physical id: 101 bus info: pci@0000:00:18.0 version: 00 width: 32 bits clock: 33MHz *-pci:2 description: Host bridge product: Family 10h Processor Address Map vendor: Advanced Micro Devices [AMD] physical id: 102 bus info: pci@0000:00:18.1 version: 00 width: 32 bits clock: 33MHz *-pci:3 description: Host bridge product: Family 10h Processor DRAM Controller vendor: Advanced Micro Devices [AMD] physical id: 103 bus info: pci@0000:00:18.2 version: 00 width: 32 bits clock: 33MHz *-pci:4 description: Host bridge product: Family 10h Processor Miscellaneous Control vendor: Advanced Micro Devices [AMD] physical id: 104 bus info: pci@0000:00:18.3 version: 00 width: 32 bits clock: 33MHz configuration: driver=k10temp resources: irq:0 *-pci:5 description: Host bridge product: Family 10h Processor Link Control vendor: Advanced Micro Devices [AMD] physical id: 105 bus info: pci@0000:00:18.4 version: 00 width: 32 bits clock: 33MHz *-scsi physical id: 1 bus info: usb@2:3 logical name: scsi8 capabilities: emulated scsi-host configuration: driver=usb-storage *-disk:0 description: SCSI Disk physical id: 0.0.0 bus info: scsi@8:0.0.0 logical name: /dev/sdc *-disk:1 description: SCSI Disk physical id: 0.0.1 bus info: scsi@8:0.0.1 logical name: /dev/sdd *-disk:2 description: SCSI Disk physical id: 0.0.2 bus info: scsi@8:0.0.2 logical name: /dev/sde *-disk:3 description: SCSI Disk physical id: 0.0.3 bus info: scsi@8:0.0.3 logical name: /dev/sdf *-network DISABLED description: Ethernet interface physical id: 1 logical name: vboxnet0 serial: 0a:00:27:00:00:00 capabilities: ethernet physical configuration: broadcast=yes multicast=yes

  Read the article

• Ubuntu server has slow performance

  - by Rich

  I have a custom built Ubuntu 11.04 server with a 6 disk software RAID 10 primary drive. On it I'm primarily running a PostgreSQL and a few other utilities that stream data from the web. I often find after a few hours of uptime the server starts to lag with all kinds of processes. For example, it may take 10-15 seconds after log-in to get a shell prompt. It might take 5-10 seconds for top to come up. An ls might take a second or two. When I look at top there is almost no CPU usage. There's a fair amount of memory used by the PostgreSQL server but not enough to bleed into swap. I have no idea where to go from here, other than to suspect the RAID10 (I've only ever had software RAID 1's before). Edit: Output from top: top - 11:56:03 up 1:46, 3 users, load average: 0.89, 0.73, 0.72 Tasks: 119 total, 1 running, 118 sleeping, 0 stopped, 0 zombie Cpu(s): 0.2%us, 0.0%sy, 0.0%ni, 93.5%id, 6.2%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 16325596k total, 3478248k used, 12847348k free, 20880k buffers Swap: 19534176k total, 0k used, 19534176k free, 3041992k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 1747 woodsp 20 0 109m 10m 4888 S 1 0.1 0:42.70 python 357 root 20 0 0 0 0 S 0 0.0 0:00.40 jbd2/sda3-8 1 root 20 0 24324 2284 1344 S 0 0.0 0:00.84 init 2 root 20 0 0 0 0 S 0 0.0 0:00.00 kthreadd 3 root 20 0 0 0 0 S 0 0.0 0:00.24 ksoftirqd/0 6 root RT 0 0 0 0 S 0 0.0 0:00.00 migration/0 7 root RT 0 0 0 0 S 0 0.0 0:00.01 watchdog/0 8 root RT 0 0 0 0 S 0 0.0 0:00.00 migration/1 10 root 20 0 0 0 0 S 0 0.0 0:00.02 ksoftirqd/1 12 root RT 0 0 0 0 S 0 0.0 0:00.01 watchdog/1 13 root RT 0 0 0 0 S 0 0.0 0:00.00 migration/2 14 root 20 0 0 0 0 S 0 0.0 0:00.00 kworker/2:0 15 root 20 0 0 0 0 S 0 0.0 0:00.00 ksoftirqd/2 16 root RT 0 0 0 0 S 0 0.0 0:00.01 watchdog/2 17 root RT 0 0 0 0 S 0 0.0 0:00.00 migration/3 18 root 20 0 0 0 0 S 0 0.0 0:00.00 kworker/3:0 19 root 20 0 0 0 0 S 0 0.0 0:00.02 ksoftirqd/3 20 root RT 0 0 0 0 S 0 0.0 0:00.01 watchdog/3 21 root 0 -20 0 0 0 S 0 0.0 0:00.00 cpuset 22 root 0 -20 0 0 0 S 0 0.0 0:00.00 khelper 23 root 20 0 0 0 0 S 0 0.0 0:00.00 kdevtmpfs 24 root 0 -20 0 0 0 S 0 0.0 0:00.00 netns 26 root 20 0 0 0 0 S 0 0.0 0:00.00 sync_supers df -h rpsharp@ncp-skookum:~$ df -h Filesystem Size Used Avail Use% Mounted on /dev/sda3 1.8T 549G 1.2T 32% / udev 7.8G 4.0K 7.8G 1% /dev tmpfs 3.2G 492K 3.2G 1% /run none 5.0M 0 5.0M 0% /run/lock none 7.8G 0 7.8G 0% /run/shm /dev/sda2 952M 128K 952M 1% /boot/efi /dev/md0 5.5T 562G 4.7T 11% /usr/local free -m psharp@ncp-skookum:~$ free -m total used free shared buffers cached Mem: 15942 3409 12533 0 20 2983 -/+ buffers/cache: 405 15537 Swap: 19076 0 19076 tail -50 /var/log/syslog Jul 3 06:31:32 ncp-skookum rsyslogd: [origin software="rsyslogd" swVersion="5.8.6" x-pid="1070" x-info="http://www.rsyslog.com"] rsyslogd was HUPed Jul 3 06:39:01 ncp-skookum CRON[14211]: (root) CMD ( [ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -depth -mindepth 1 -maxdepth 1 -type f -cmin +$(/usr/lib/php5/maxlifetime) ! -execdir fuser -s {} 2>/dev/null \; -delete) Jul 3 06:40:01 ncp-skookum CRON[14223]: (smmsp) CMD (test -x /etc/init.d/sendmail && /usr/share/sendmail/sendmail cron-msp) Jul 3 07:00:01 ncp-skookum CRON[14328]: (woodsp) CMD (/home/woodsp/bin/mail_tweetupdate # email an update) Jul 3 07:00:01 ncp-skookum CRON[14327]: (smmsp) CMD (test -x /etc/init.d/sendmail && /usr/share/sendmail/sendmail cron-msp) Jul 3 07:00:28 ncp-skookum sendmail[14356]: q63E0SoZ014356: from=woodsp, size=2328, class=0, nrcpts=2, msgid=<[email protected]>, relay=woodsp@localhost Jul 3 07:00:29 ncp-skookum sm-mta[14357]: q63E0Si6014357: from=<[email protected]>, size=2569, class=0, nrcpts=2, msgid=<[email protected]>, proto=ESMTP, daemon=MTA-v4, relay=localhost [127.0.0.1] Jul 3 07:00:29 ncp-skookum sendmail[14356]: q63E0SoZ014356: to=Spencer Wood <[email protected]>,Martin Lacayo <[email protected]>, ctladdr=woodsp (1004/1005), delay=00:00:01, xdelay=00:00:01, mailer=relay, pri=62328, relay=[127.0.0.1] [127.0.0.1], dsn=2.0.0, stat=Sent (q63E0Si6014357 Message accepted for delivery) Jul 3 07:00:29 ncp-skookum sm-mta[14359]: STARTTLS=client, relay=mx3.stanford.edu., version=TLSv1/SSLv3, verify=FAIL, cipher=DHE-RSA-AES256-SHA, bits=256/256 Jul 3 07:00:29 ncp-skookum sm-mta[14359]: q63E0Si6014357: to=<[email protected]>,<[email protected]>, ctladdr=<[email protected]> (1004/1005), delay=00:00:01, xdelay=00:00:00, mailer=esmtp, pri=152569, relay=mx3.stanford.edu. [171.67.219.73], dsn=2.0.0, stat=Sent (Ok: queued as 8F3505802AC) Jul 3 07:09:08 ncp-skookum CRON[14396]: (root) CMD ( [ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -depth -mindepth 1 -maxdepth 1 -type f -cmin +$(/usr/lib/php5/maxlifetime) ! -execdir fuser -s {} 2>/dev/null \; -delete) Jul 3 07:17:01 ncp-skookum CRON[14438]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly) Jul 3 07:20:01 ncp-skookum CRON[14453]: (smmsp) CMD (test -x /etc/init.d/sendmail && /usr/share/sendmail/sendmail cron-msp) Jul 3 07:39:01 ncp-skookum CRON[14551]: (root) CMD ( [ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -depth -mindepth 1 -maxdepth 1 -type f -cmin +$(/usr/lib/php5/maxlifetime) ! -execdir fuser -s {} 2>/dev/null \; -delete) Jul 3 07:40:01 ncp-skookum CRON[14562]: (smmsp) CMD (test -x /etc/init.d/sendmail && /usr/share/sendmail/sendmail cron-msp) Jul 3 08:00:01 ncp-skookum CRON[14668]: (smmsp) CMD (test -x /etc/init.d/sendmail && /usr/share/sendmail/sendmail cron-msp) Jul 3 08:09:01 ncp-skookum CRON[14724]: (root) CMD ( [ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -depth -mindepth 1 -maxdepth 1 -type f -cmin +$(/usr/lib/php5/maxlifetime) ! -execdir fuser -s {} 2>/dev/null \; -delete) Jul 3 08:17:01 ncp-skookum CRON[14766]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly) Jul 3 08:20:01 ncp-skookum CRON[14781]: (smmsp) CMD (test -x /etc/init.d/sendmail && /usr/share/sendmail/sendmail cron-msp) Jul 3 08:39:01 ncp-skookum CRON[14881]: (root) CMD ( [ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -depth -mindepth 1 -maxdepth 1 -type f -cmin +$(/usr/lib/php5/maxlifetime) ! -execdir fuser -s {} 2>/dev/null \; -delete) Jul 3 08:40:01 ncp-skookum CRON[14892]: (smmsp) CMD (test -x /etc/init.d/sendmail && /usr/share/sendmail/sendmail cron-msp) Output of hdparm -t /dev/sd{a,b,c,d,e,f} This looks suspicious? /dev/sda: Timing buffered disk reads: 2 MB in 4.84 seconds = 423.39 kB/sec /dev/sdb: Timing buffered disk reads: 420 MB in 3.01 seconds = 139.74 MB/sec /dev/sdc: Timing buffered disk reads: 390 MB in 3.00 seconds = 129.87 MB/sec /dev/sdd: Timing buffered disk reads: 416 MB in 3.00 seconds = 138.51 MB/sec /dev/sde: Timing buffered disk reads: 422 MB in 3.00 seconds = 140.50 MB/sec /dev/sdf: Timing buffered disk reads: 416 MB in 3.01 seconds = 138.26 MB/sec

  Read the article

• qemu-kvm virtual machine virtio network freeze under load

  - by Rick Koshi

  I'm having a problem with my virtual machines, where the network will freeze under heavy load. I'm using CentOS 6.2 as both host and guest, not using libvirt, just running qemu-kvm directly as follows: /usr/libexec/qemu-kvm \ -drive file=/data2/vm/rb-dev2-www1-vm.img,index=0,media=disk,cache=none,if=virtio \ -boot order=c \ -m 2G \ -smp cores=1,threads=2 \ -vga std \ -name rb-dev2-www1-vm \ -vnc :84,password \ -net nic,vlan=0,macaddr=52:54:20:00:00:54,model=virtio \ -net tap,vlan=0,ifname=tap84,script=/etc/qemu-ifup \ -monitor unix:/var/run/vm/rb-dev2-www1-vm.mon,server,nowait \ -rtc base=utc \ -device piix3-usb-uhci \ -device usb-tablet /etc/qemu-ifup (used by the above command) is a very simple script, containing the following: #!/bin/sh sudo /sbin/ifconfig $1 0.0.0.0 promisc up sudo /usr/sbin/brctl addif br0 $1 sleep 2 And here's the info on br0 and other interfaces: avl-host3 14# brctl show bridge name bridge id STP enabled interfaces br0 8000.180373f5521a no bond0 tap84 virbr0 8000.525400858961 yes virbr0-nic avl-host3 15# ip addr show 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: em1: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500 qdisc mq master bond0 state UP qlen 1000 link/ether 18:03:73:f5:52:1a brd ff:ff:ff:ff:ff:ff 3: em2: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500 qdisc mq master bond0 state UP qlen 1000 link/ether 18:03:73:f5:52:1a brd ff:ff:ff:ff:ff:ff 4: em3: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000 link/ether 18:03:73:f5:52:1e brd ff:ff:ff:ff:ff:ff 5: em4: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000 link/ether 18:03:73:f5:52:20 brd ff:ff:ff:ff:ff:ff 6: bond0: <BROADCAST,MULTICAST,MASTER,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP link/ether 18:03:73:f5:52:1a brd ff:ff:ff:ff:ff:ff inet6 fe80::1a03:73ff:fef5:521a/64 scope link valid_lft forever preferred_lft forever 7: br0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN link/ether 18:03:73:f5:52:1a brd ff:ff:ff:ff:ff:ff inet 172.16.1.46/24 brd 172.16.1.255 scope global br0 inet6 fe80::1a03:73ff:fef5:521a/64 scope link valid_lft forever preferred_lft forever 8: virbr0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN link/ether 52:54:00:85:89:61 brd ff:ff:ff:ff:ff:ff inet 192.168.122.1/24 brd 192.168.122.255 scope global virbr0 9: virbr0-nic: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 500 link/ether 52:54:00:85:89:61 brd ff:ff:ff:ff:ff:ff 12: tap84: <BROADCAST,MULTICAST,PROMISC,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNOWN qlen 500 link/ether ba:e8:9b:2a:ff:48 brd ff:ff:ff:ff:ff:ff inet6 fe80::b8e8:9bff:fe2a:ff48/64 scope link valid_lft forever preferred_lft forever bond0 is a bond of em1 and em2. virbr0 and virbr0-nic are vestigial interfaces left over from CentOS's default installation. They are unused (as far as I know). The guest runs perfectly until I run a large 'rsync', when the network will freeze after some seemingly-random time (usually under a minute). When it freezes, there is no network activity in or out of the guest. I can still connect to the guest's console via vnc, but it is unable to speak out its network interface. Any attempt to 'ping' from the guest gives a "Destination Host Unreachable" error for 3/4 packets and no reply for every fourth packet. Sometimes (perhaps two thirds of the time), I can bring the interface back to life by doing a "service network restart" from the guest's console. If this works (and if I do it before the rsync times out), the rsync will resume. Usually it will freeze again within a minute or two. If I repeat, the rsync will eventually finish, and I presume the machine goes back to waiting for another period of heavy load. Throughout the whole process, there are no console errors or relevant (that I can see) syslog messages on either guest or host machine. If the "service network restart" doesn't work the first time, trying again (and again and again) never seems to work. The command completes normally, with normal output, but the interface stays frozen. However, a soft reboot of the guest machine (without restarting qemu-kvm) always seems to bring it back. I am aware of the "lowest mac address" assignment problem, where the bridge takes on the mac address of the slave interface with the lowest mac address. This causes temporary network freezes, but is definitely not what's happening for me. My freezes are permanent until manual intervention, and you can see from the 'ip addr show' output above that the mac address being used by br0 is that of the physical ethernet. There are no other virtual machines running on the host. I've verified that each virtual machine on the subnet has its own unique mac address. I have rebuilt the guest machine several times, and I have tried this on three different host machines (identical hardware, built identically). Oddly, I do have one virtual host (the second of this series) which never seemed to have a problem. It never had its network freeze when it was running the same rsync during its build. It's particularly odd because it was the second build. The first, on a different host, did have the freezing problem, but the second did not. I assumed at the time that I had done something wrong with the first build, and that the problem was resolved. Unfortunately, the problem reappeared when I built the third VM. Also unfortunately, I can't do many tests with the working VM, as it's now in production use, and I'm hoping I can find the cause of this issue before that machine starts having problems. It's possible that I just got really lucky while running the rsync on the working machine, and that one time it didn't freeze. Of course it's possible that I somehow changed the build scripts without realizing it and re-broke something, but I can't find any such thing. In any case, I'm hoping someone has some idea what could cause this. Addendum: Preliminary tests suggest that I don't have the problem if I substitute e1000 for virtio in the first -net flag to qemu-kvm. I don't consider this a solution, but it is suitable for a stopgap. Has anyone else had (or better yet, solved) this problem with the virtio network driver?

  Read the article

• problems mounting an external IDE drive via USB in ubuntu

  - by Roy Rico

  I am having a problem connecting a specific IDE drive to my linux box. It's an old drive which I just want to get about 3 GB of files off of. INFO I am trying to connect a 200GB IDE Maxtor Drive, internally and externally... externally: I am using an self powered USB IDE external drive enclosure which I have used to connect various drives, under ubuntu and windows, in the past. The other posts stated it coudl be a problem I think i may have formatted the /dev/sdc partition instead of /dev/sdc1 partition when i originally formatted the drive. internally: I only have one machine left that has an internal IDE interface, and it's got XP on it. I plugged this drive internally into this machine with windows XP and used the ext2/ext3 drivers to mount this drive, but some files have question marks (?) in the file names which is messing up my copy process in windows. I can't delete the files under windows. Ubuntu Linux will not install on my only remaining machine that has IDE controller. I have tried the suggestions in the questions below http://superuser.com/questions/88182/mount-an-external-drive-in-ubuntu http://superuser.com/questions/23210/ubuntu-fails-to-mount-usb-drive it looks like i can see the drive in /proc/partitions $ cat /proc/partitions major minor #blocks name 8 0 78125000 sda 8 1 74894998 sda1 8 2 1 sda2 8 5 3229033 sda5 8 16 199148544 sdb <-- could be my drive? but it's not listed under fdisk -l $ fdisk -l Disk /dev/sda: 80.0 GB, 80000000000 bytes 255 heads, 63 sectors/track, 9726 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0xd0f4738c Device Boot Start End Blocks Id System /dev/sda1 * 1 9324 74894998+ 83 Linux /dev/sda2 9325 9726 3229065 5 Extended /dev/sda5 9325 9726 3229033+ 82 Linux swap / Solaris and here is my log of /var/log/messages. with a bunch of weird output, can someone let me know what that weird output is? Mar 3 19:49:40 mala kernel: [687455.112029] usb 1-7: new high speed USB device using ehci_hcd and address 3 Mar 3 19:49:41 mala kernel: [687455.248576] usb 1-7: configuration #1 chosen from 1 choice Mar 3 19:49:41 mala kernel: [687455.267450] Initializing USB Mass Storage driver... Mar 3 19:49:41 mala kernel: [687455.269180] scsi4 : SCSI emulation for USB Mass Storage devices Mar 3 19:49:41 mala kernel: [687455.269410] usbcore: registered new interface driver usb-storage Mar 3 19:49:41 mala kernel: [687455.269416] USB Mass Storage support registered. Mar 3 19:49:46 mala kernel: [687460.270917] scsi 4:0:0:0: Direct-Access Maxtor 6 Y200P0 YAR4 PQ: 0 ANSI: 2 Mar 3 19:49:46 mala kernel: [687460.271485] sd 4:0:0:0: Attached scsi generic sg2 type 0 Mar 3 19:49:46 mala kernel: [687460.278858] sd 4:0:0:0: [sdb] 398297088 512-byte logical blocks: (203 GB/189 GiB) Mar 3 19:49:46 mala kernel: [687460.280866] sd 4:0:0:0: [sdb] Write Protect is off Mar 3 19:50:16 mala kernel: [687460.283784] sdb: Mar 3 19:50:16 mala kernel: [687491.112020] usb 1-7: reset high speed USB device using ehci_hcd and address 3 Mar 3 19:50:47 mala kernel: [687522.120030] usb 1-7: reset high speed USB device using ehci_hcd and address 3 Mar 3 19:51:18 mala kernel: [687553.112034] usb 1-7: reset high speed USB device using ehci_hcd and address 3 Mar 3 19:51:49 mala kernel: [687584.116025] usb 1-7: reset high speed USB device using ehci_hcd and address 3 Mar 3 19:52:02 mala kernel: [687596.170632] type=1505 audit(1267671122.035:31): operation="profile_replace" pid=8426 name=/usr/lib/cups/backend/cups-pdf Mar 3 19:52:02 mala kernel: [687596.171551] type=1505 audit(1267671122.035:32): operation="profile_replace" pid=8426 name=/usr/sbin/cupsd Mar 3 19:52:06 mala kernel: [687600.908056] async/0 D c08145c0 0 7655 2 0x00000000 Mar 3 19:52:06 mala kernel: [687600.908062] e5601d38 00000046 e5774000 c08145c0 e4c2a848 c08145c0 d203973a 0002713d Mar 3 19:52:06 mala kernel: [687600.908072] c08145c0 c08145c0 e4c2a848 c08145c0 00000000 0002713d c08145c0 f0a98c00 Mar 3 19:52:06 mala kernel: [687600.908079] e4c2a5b0 c20125c0 00000002 e5601d80 e5601d44 c056f3be e5601d78 e5601d4c Mar 3 19:52:06 mala kernel: [687600.908087] Call Trace: Mar 3 19:52:06 mala kernel: [687600.908099] [<c056f3be>] io_schedule+0x1e/0x30 Mar 3 19:52:06 mala kernel: [687600.908107] [<c01b2cf5>] sync_page+0x35/0x40 Mar 3 19:52:06 mala kernel: [687600.908111] [<c056f8f7>] __wait_on_bit_lock+0x47/0x90 Mar 3 19:52:06 mala kernel: [687600.908115] [<c01b2cc0>] ? sync_page+0x0/0x40 Mar 3 19:52:06 mala kernel: [687600.908121] [<c020f390>] ? blkdev_readpage+0x0/0x20 Mar 3 19:52:06 mala kernel: [687600.908125] [<c01b2ca9>] __lock_page+0x79/0x80 Mar 3 19:52:06 mala kernel: [687600.908130] [<c015c130>] ? wake_bit_function+0x0/0x50 Mar 3 19:52:06 mala kernel: [687600.908135] [<c01b459f>] read_cache_page_async+0xbf/0xd0 Mar 3 19:52:06 mala kernel: [687600.908139] [<c01b45c2>] read_cache_page+0x12/0x60 Mar 3 19:52:06 mala kernel: [687600.908144] [<c0232dca>] read_dev_sector+0x3a/0x80 Mar 3 19:52:06 mala kernel: [687600.908148] [<c0233d3e>] adfspart_check_ICS+0x1e/0x160 Mar 3 19:52:06 mala kernel: [687600.908152] [<c023339f>] ? disk_name+0xaf/0xc0 Mar 3 19:52:06 mala kernel: [687600.908157] [<c0233d20>] ? adfspart_check_ICS+0x0/0x160 Mar 3 19:52:06 mala kernel: [687600.908161] [<c02334de>] check_partition+0x10e/0x180 Mar 3 19:52:06 mala kernel: [687600.908165] [<c02335f6>] rescan_partitions+0xa6/0x330 Mar 3 19:52:06 mala kernel: [687600.908171] [<c0312472>] ? kobject_get+0x12/0x20 Mar 3 19:52:06 mala kernel: [687600.908175] [<c0312472>] ? kobject_get+0x12/0x20 Mar 3 19:52:06 mala kernel: [687600.908180] [<c039fc43>] ? get_device+0x13/0x20 Mar 3 19:52:06 mala kernel: [687600.908185] [<c03c263f>] ? sd_open+0x5f/0x1b0 Mar 3 19:52:06 mala kernel: [687600.908189] [<c020fda0>] __blkdev_get+0x140/0x310 Mar 3 19:52:06 mala kernel: [687600.908194] [<c020f0ac>] ? bdget+0xec/0x100 Mar 3 19:52:06 mala kernel: [687600.908198] [<c020ff7a>] blkdev_get+0xa/0x10 Mar 3 19:52:06 mala kernel: [687600.908202] [<c0232f30>] register_disk+0x120/0x140 Mar 3 19:52:06 mala kernel: [687600.908207] [<c0308b4d>] ? blk_register_region+0x2d/0x40 Mar 3 19:52:06 mala kernel: [687600.908211] [<c03084f0>] ? exact_match+0x0/0x10 Mar 3 19:52:06 mala kernel: [687600.908216] [<c0308cf0>] add_disk+0x80/0x140 Mar 3 19:52:06 mala kernel: [687600.908221] [<c03084f0>] ? exact_match+0x0/0x10 Mar 3 19:52:06 mala kernel: [687600.908225] [<c0308860>] ? exact_lock+0x0/0x20 Mar 3 19:52:06 mala kernel: [687600.908230] [<c03c53df>] sd_probe_async+0xff/0x1c0

  Read the article

• AD-Integrated DNS failure: "Access was Denied"

  - by goldPseudo

  I have a single Windows 2008 R2 server configured as a domain controller with Active Directory Domain Services and DNS Server. The DNS Server was recently uninstalled and reinstalled in an attempt to fix a (possibly unrelated) problem; the event log was previously flooded with errors (#4000, "The DNS Server was unable to open Active Directory...") which reinstalling did not fix. However, while before it was at least showing and resolving names from the local network (slowly), now it's showing nothing at all. (The original error started with a #4015 error "The DNS server has encountered a critical error from the Active Directory," followed by a long string of #4000 and a few #4004. This may have been caused when a new DNS name was recently added, but I can't be sure of the timing.) Attempting to manage the DNS through Administrative Tools > DNS brings up an error: The server SERVERNAME could not be contacted. The error was: Access was denied. Would you like to add it anyway? Selecting yes just puts a SERVERNAME item on the list, but with all the configuration options grayed out. I attempted editing my hosts file as per this post but to no avail. Running dcdiag, it does identify the home server properly, but fails right away testing connectivity with: Starting test: Connectivity The host blahblahblahyaddayaddayadda could not be resolved to an IP address. Check the DNS server, DHCP, server name, etc. Got error while checking LDAP and RPC connectivity. Please check your firewall settings. ......................... SERVERNAME failed test Connectivity Adding the blahblahblahyaddayaddayadda address to hosts (pointing at 127.0.0.1), the connectivity test succeeded but it didn't seem to solve the fundamental problem (Access was denied) so I hashed it out again. Primary DNS server is properly pointing at 127.0.0.1 according to ipconfig /all. And the DNS server is forwarding requests to external addresses properly (if slowly), but the resolving of local network names is borked. The DNS database itself is small enough that I am (grudgingly) able to rebuild it if need be, but the DNS Server doesn't seem willing to let me work with (or around) it at all. (and yes before you ask there are no system backups available) Where do I go from here? As requested, my (slightly obfuscated) dcdiag output: Directory Server Diagnosis Performing initial setup: Trying to find home server... Home Server = bulgogi * Identified AD Forest. Done gathering initial info. Doing initial required tests Testing server: Obfuscated\BULGOGI Starting test: Connectivity The host a-whole-lot-of-numbers._msdcs.obfuscated.address could not be resolved to an IP address. Check the DNS server, DHCP, server name, etc. Got error while checking LDAP and RPC connectivity. Please check your firewall settings. ......................... BULGOGI failed test Connectivity Doing primary tests Testing server: Obfuscated\BULGOGI Skipping all tests, because server BULGOGI is not responding to directory service requests. Running partition tests on : ForestDnsZones Starting test: CheckSDRefDom ......................... ForestDnsZones passed test CheckSDRefDom Starting test: CrossRefValidation ......................... ForestDnsZones passed test CrossRefValidation Running partition tests on : DomainDnsZones Starting test: CheckSDRefDom ......................... DomainDnsZones passed test CheckSDRefDom Starting test: CrossRefValidation ......................... DomainDnsZones passed test CrossRefValidation Running partition tests on : Schema Starting test: CheckSDRefDom ......................... Schema passed test CheckSDRefDom Starting test: CrossRefValidation ......................... Schema passed test CrossRefValidation Running partition tests on : Configuration Starting test: CheckSDRefDom ......................... Configuration passed test CheckSDRefDom Starting test: CrossRefValidation ......................... Configuration passed test CrossRefValidation Running partition tests on : obfuscated Starting test: CheckSDRefDom ......................... obfuscated passed test CheckSDRefDom Starting test: CrossRefValidation ......................... obfuscated passed test CrossRefValidation Running enterprise tests on : obfuscated.address Starting test: LocatorCheck ......................... obfuscated.address passed test LocatorCheck Starting test: Intersite ......................... obfuscated.address passed test Intersite And my hosts file (minus the hashed lines for brevity): 127.0.0.1 localhost ::1 localhost And, for the sake of completion, here's selected chunks of my netstat -a -n output: TCP 0.0.0.0:88 0.0.0.0:0 LISTENING TCP 0.0.0.0:135 0.0.0.0:0 LISTENING TCP 0.0.0.0:389 0.0.0.0:0 LISTENING TCP 0.0.0.0:445 0.0.0.0:0 LISTENING TCP 0.0.0.0:464 0.0.0.0:0 LISTENING TCP 0.0.0.0:593 0.0.0.0:0 LISTENING TCP 0.0.0.0:636 0.0.0.0:0 LISTENING TCP 0.0.0.0:3268 0.0.0.0:0 LISTENING TCP 0.0.0.0:3269 0.0.0.0:0 LISTENING TCP 0.0.0.0:3389 0.0.0.0:0 LISTENING TCP 0.0.0.0:9389 0.0.0.0:0 LISTENING TCP 0.0.0.0:47001 0.0.0.0:0 LISTENING TCP 0.0.0.0:49152 0.0.0.0:0 LISTENING TCP 0.0.0.0:49153 0.0.0.0:0 LISTENING TCP 0.0.0.0:49154 0.0.0.0:0 LISTENING TCP 0.0.0.0:49155 0.0.0.0:0 LISTENING TCP 0.0.0.0:49157 0.0.0.0:0 LISTENING TCP 0.0.0.0:49158 0.0.0.0:0 LISTENING TCP 0.0.0.0:49164 0.0.0.0:0 LISTENING TCP 0.0.0.0:49178 0.0.0.0:0 LISTENING TCP 0.0.0.0:49179 0.0.0.0:0 LISTENING TCP 0.0.0.0:50480 0.0.0.0:0 LISTENING TCP 127.0.0.1:53 0.0.0.0:0 LISTENING TCP 192.168.12.127:53 0.0.0.0:0 LISTENING TCP 192.168.12.127:139 0.0.0.0:0 LISTENING TCP 192.168.12.127:445 192.168.12.50:51118 ESTABLISHED TCP 192.168.12.127:3389 192.168.12.4:33579 ESTABLISHED TCP 192.168.12.127:3389 192.168.12.100:1115 ESTABLISHED TCP 192.168.12.127:50784 192.168.12.50:49174 ESTABLISHED <snip ipv6> UDP 0.0.0.0:123 *:* UDP 0.0.0.0:500 *:* UDP 0.0.0.0:1645 *:* UDP 0.0.0.0:1645 *:* UDP 0.0.0.0:1646 *:* UDP 0.0.0.0:1646 *:* UDP 0.0.0.0:1812 *:* UDP 0.0.0.0:1812 *:* UDP 0.0.0.0:1813 *:* UDP 0.0.0.0:1813 *:* UDP 0.0.0.0:4500 *:* UDP 0.0.0.0:5355 *:* UDP 0.0.0.0:59638 *:* <snip a few thousand lines> UDP 0.0.0.0:62140 *:* UDP 127.0.0.1:53 *:* UDP 127.0.0.1:49540 *:* UDP 127.0.0.1:49541 *:* UDP 127.0.0.1:53655 *:* UDP 127.0.0.1:54946 *:* UDP 127.0.0.1:58345 *:* UDP 127.0.0.1:63352 *:* UDP 127.0.0.1:63728 *:* UDP 127.0.0.1:63729 *:* UDP 127.0.0.1:64215 *:* UDP 127.0.0.1:64646 *:* UDP 192.168.12.127:53 *:* UDP 192.168.12.127:67 *:* UDP 192.168.12.127:68 *:* UDP 192.168.12.127:88 *:* UDP 192.168.12.127:137 *:* UDP 192.168.12.127:138 *:* UDP 192.168.12.127:389 *:* UDP 192.168.12.127:464 *:* UDP 192.168.12.127:2535 *:* <snip ipv6 again>

  Read the article

• IRQ problem with 2.6.32/2.6.39 kernel on Debian Squeeze x86_64

  - by MasterM

  I recently assembled a new computer so that all hardware is pretty new. Since then I've been experiencing some problem with IRQs when running Debian 6.0. On random occasions, usually after an hour or so of running I hear a beep and this shows up in dmesg: [ 3537.762795] irq 16: nobody cared (try booting with the "irqpoll" option) [ 3537.762797] Pid: 0, comm: swapper Tainted: P W O 2.6.39-2-amd64 #1 [ 3537.762798] Call Trace: [ 3537.762799] <IRQ> [<ffffffff810924d4>] ? __report_bad_irq+0x3a/0xa2 [ 3537.762803] [<ffffffff810926a4>] ? note_interrupt+0x168/0x1da [ 3537.762805] [<ffffffff81090dd4>] ? handle_irq_event_percpu+0x171/0x18f [ 3537.762807] [<ffffffff8100e0e2>] ? read_tsc+0x5/0x16 [ 3537.762809] [<ffffffff8106b8a2>] ? update_ts_time_stats+0x32/0x6b [ 3537.762810] [<ffffffff81090e26>] ? handle_irq_event+0x34/0x52 [ 3537.762812] [<ffffffff81063fb7>] ? sched_clock_idle_wakeup_event+0x12/0x1c [ 3537.762813] [<ffffffff81092df2>] ? handle_fasteoi_irq+0x82/0xa4 [ 3537.762815] [<ffffffff8100aadb>] ? handle_irq+0x1a/0x23 [ 3537.762816] [<ffffffff8100a384>] ? do_IRQ+0x45/0xaa [ 3537.762818] [<ffffffff81332c93>] ? common_interrupt+0x13/0x13 [ 3537.762818] <EOI> [<ffffffff81332c8e>] ? common_interrupt+0xe/0x13 [ 3537.762821] [<ffffffff81026800>] ? native_safe_halt+0x2/0x3 [ 3537.762829] [<ffffffffa016ed58>] ? acpi_idle_do_entry+0x39/0x62 [processor] [ 3537.762831] [<ffffffffa016edde>] ? acpi_idle_enter_c1+0x5d/0xad [processor] [ 3537.762834] [<ffffffff81261033>] ? cpuidle_idle_call+0x11f/0x1cc [ 3537.762835] [<ffffffff81008dd2>] ? cpu_idle+0xab/0xe1 [ 3537.762837] [<ffffffff8169fc60>] ? start_kernel+0x3e0/0x3eb [ 3537.762838] [<ffffffff8169f3c8>] ? x86_64_start_kernel+0x102/0x10f [ 3537.762839] handlers: [ 3537.762840] [<ffffffffa0358d5a>] (rtl8169_interrupt+0x0/0x2d7 [r8169]) [ 3537.762842] [<ffffffffa08ff2ca>] (nv_kern_isr+0x0/0x54 [nvidia]) [ 3537.762902] Disabling IRQ #16 After that Xorg either hogs on CPU or is unstable (up to hanging the system completely). When I restart Xorg everything is fine again and the problem doesn't occur until next reboot. I tried to upgrade the kernel from stock 2.6.32 to 2.6.39 from unstable repository but that didn't help. Booting with irqpoll option only seems to prolong the initial time period after which the problem occurs. I'm using latest NVIDIA drivers and Realtek firmware from firmware-realtek package. I have two GTX 560Ti that run in SLI. Disabling SLI or taking out one card completely doesn't solve the problem either. Output of uname -a is: Linux whitestar 2.6.39-2-amd64 #1 SMP Wed Jun 8 11:01:04 UTC 2011 x86_64 GNU/Linux Output of lspci is: 00:00.0 Host bridge: Intel Corporation Sandy Bridge DRAM Controller (rev 09) 00:01.0 PCI bridge: Intel Corporation Sandy Bridge PCI Express Root Port (rev 09) 00:01.1 PCI bridge: Intel Corporation Sandy Bridge PCI Express Root Port (rev 09) 00:16.0 Communication controller: Intel Corporation Cougar Point HECI Controller #1 (rev 04) 00:19.0 Ethernet controller: Intel Corporation 82579V Gigabit Network Connection (rev 05) 00:1a.0 USB Controller: Intel Corporation Cougar Point USB Enhanced Host Controller #2 (rev 05) 00:1b.0 Audio device: Intel Corporation Cougar Point High Definition Audio Controller (rev 05) 00:1c.0 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 1 (rev b5) 00:1c.1 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 2 (rev b5) 00:1c.2 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 3 (rev b5) 00:1c.4 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 5 (rev b5) 00:1c.6 PCI bridge: Intel Corporation 82801 PCI Bridge (rev b5) 00:1d.0 USB Controller: Intel Corporation Cougar Point USB Enhanced Host Controller #1 (rev 05) 00:1f.0 ISA bridge: Intel Corporation Cougar Point LPC Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation Cougar Point 6 port SATA AHCI Controller (rev 05) 00:1f.3 SMBus: Intel Corporation Cougar Point SMBus Controller (rev 05) 01:00.0 VGA compatible controller: nVidia Corporation Device 1200 (rev a1) 01:00.1 Audio device: nVidia Corporation Device 0e0c (rev a1) 02:00.0 VGA compatible controller: nVidia Corporation Device 1200 (rev a1) 02:00.1 Audio device: nVidia Corporation Device 0e0c (rev a1) 04:00.0 USB Controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 04) 06:00.0 USB Controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 04) 07:00.0 PCI bridge: Device 1b21:1080 (rev 01) 08:02.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8110SC/8169SC Gigabit Ethernet (rev 10) 08:03.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller (rev c0) Contents of /proc/interrupts: CPU0 CPU1 CPU2 CPU3 CPU4 CPU5 CPU6 CPU7 0: 77 0 0 0 0 0 0 0 IO-APIC-edge timer 1: 2 0 0 0 0 0 0 0 IO-APIC-edge i8042 8: 1 0 0 0 0 0 0 0 IO-APIC-edge rtc0 9: 0 0 0 0 0 0 0 0 IO-APIC-fasteoi acpi 12: 4 0 0 0 0 0 0 0 IO-APIC-edge i8042 16: 699083 0 0 0 0 0 0 0 IO-APIC-fasteoi nvidia, eth0 17: 87810 0 0 0 0 0 0 0 IO-APIC-fasteoi firewire_ohci, hda_intel, nvidia 18: 242 0 0 0 0 0 0 0 IO-APIC-fasteoi hda_intel 23: 85925 0 0 0 0 0 0 0 IO-APIC-fasteoi ehci_hcd:usb5, ehci_hcd:usb6 40: 0 0 0 0 0 0 0 0 PCI-MSI-edge PCIe PME 41: 0 0 0 0 0 0 0 0 PCI-MSI-edge PCIe PME 42: 0 0 0 0 0 0 0 0 PCI-MSI-edge PCIe PME 43: 0 0 0 0 0 0 0 0 PCI-MSI-edge PCIe PME 44: 0 0 0 0 0 0 0 0 PCI-MSI-edge PCIe PME 45: 0 0 0 0 0 0 0 0 PCI-MSI-edge PCIe PME 46: 79853 0 0 0 0 0 0 0 PCI-MSI-edge ahci 48: 1 0 0 0 0 0 0 0 PCI-MSI-edge xhci_hcd 49: 0 0 0 0 0 0 0 0 PCI-MSI-edge xhci_hcd 50: 0 0 0 0 0 0 0 0 PCI-MSI-edge xhci_hcd 51: 0 0 0 0 0 0 0 0 PCI-MSI-edge xhci_hcd 52: 0 0 0 0 0 0 0 0 PCI-MSI-edge xhci_hcd 53: 0 0 0 0 0 0 0 0 PCI-MSI-edge xhci_hcd 54: 0 0 0 0 0 0 0 0 PCI-MSI-edge xhci_hcd 55: 0 0 0 0 0 0 0 0 PCI-MSI-edge xhci_hcd 56: 1 0 0 0 0 0 0 0 PCI-MSI-edge xhci_hcd 57: 0 0 0 0 0 0 0 0 PCI-MSI-edge xhci_hcd 58: 0 0 0 0 0 0 0 0 PCI-MSI-edge xhci_hcd 59: 0 0 0 0 0 0 0 0 PCI-MSI-edge xhci_hcd 60: 0 0 0 0 0 0 0 0 PCI-MSI-edge xhci_hcd 61: 0 0 0 0 0 0 0 0 PCI-MSI-edge xhci_hcd 62: 0 0 0 0 0 0 0 0 PCI-MSI-edge xhci_hcd 63: 0 0 0 0 0 0 0 0 PCI-MSI-edge xhci_hcd 64: 173506 0 0 0 0 0 0 0 PCI-MSI-edge hda_intel NMI: 482 89 25 13 277 24 11 10 Non-maskable interrupts LOC: 783857 194752 114133 70577 372438 179065 117179 162016 Local timer interrupts SPU: 0 0 0 0 0 0 0 0 Spurious interrupts PMI: 482 89 25 13 277 24 11 10 Performance monitoring interrupts IWI: 0 0 0 0 0 0 0 0 IRQ work interrupts RES: 131917 46750 7432 3291 150003 9576 3435 3067 Rescheduling interrupts CAL: 2759 6563 7150 6997 5387 7140 7269 6678 Function call interrupts TLB: 4396 2038 1336 492 5434 1896 1121 606 TLB shootdowns TRM: 0 0 0 0 0 0 0 0 Thermal event interrupts THR: 0 0 0 0 0 0 0 0 Threshold APIC interrupts MCE: 0 0 0 0 0 0 0 0 Machine check exceptions MCP: 37 37 37 37 37 37 37 37 Machine check polls ERR: 0 MIS: 0 Last but not least, right after boot-up those lines are usually present in dmesg: [ 18.367094] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj. [ 18.458859] hda-intel: IRQ timing workaround is activated for card #2. Suggest a bigger bdl_pos_adj. I'm not sure if it's related or a symptom of a bigger problem so I'm posting it just in case. I don't really know what other information might be of relevance here. Don't hesitate to ask for more in the comments.

  Read the article

• FreeBSD 8.0 - Macbook: Trying to Connect to Wireless

  - by Koroviev

  What Happened A few days ago I installed FreeBSD 8from USB to my Macbook (Core Duo, 13"). The first thing I wanted to do was get my GUI back. I'm new to FreeBSD and it's my first time off of mac or windows, so I had some learning to do. I tried to a make clean install of xorg with ports but it returned many "No address record" errors. I realised I hadn't configured network settings and then the fun started. I ran ifconfig and it found 5 devices: msk0, ath0, fwe0, fwip0, lo0. * ath0 was identified as media: IEEE 802.11 Wireless Ethernet autoselect so it was clear which one I needed. From what I gathered, there are 3 files and two processes involved here: /boot/loader.conf /etc/wpa_supplicant.conf /etc/rc.conf /etc/rc.d/netif wpa_supplicant (which is a part of the former too) I'm certain it's a big simplification, so correct me if I'm wrong here. What I Tried I configured /boot/loader.conf with the few basic settings, and I'm most sure that this file is okay. The other 2 were more puzzling. I tried to make a network package in wpa_supplicant.conf. I found the ssid of the router, but the security wasn't so easy. The routers configuration on security is set to "Auto", with no explanation given. Other options are there, but Auto is selected. Another laptop uses WEP to connect (it's Vista, so I don't know how to get any more info than that), but I never configured it to do it. There's a string labled "wireless key" on the bottom of the router which I entered to set it up a new machine on the network (Windows and Macs, so it was simplified). I never had to choose a security type and only learned about them by installing FreeBSD. So perhaps WEP is what "Auto" means, but I can't find any other evidence. wpa_supplicant.conf seemed to never be correctly configured. I always got errors related to it and WPA_supplicant doesn't work. It gave me "Can't disable/enable WPA in the driver" errors and more once when I enabled -d -d. This was when I was trying some suspect configurations in rc.conf though. Usually it does nothing except hijack the shell and print "CTRL-SCAN-EVENT-RESULT" every 10 seconds. I learned how to clone the ath0 device to a wlandev interface (wlan0). ath0 is associated to it and their connection seems to go smoothly. But the wlan0's connection to the network is the problem. I couldn't create this with rc.conf, I do something wrong and get ifconfig: create: bad value errors whenever it's parsed. I did it via the shell instead. What Now? I scanned with wlan0 today: ifconfig wlan0 list scan It shows my router, even my neighbour's router. It was a relief to finally get some feedback. So wlan0 is UP and detects the router, but it is always status: no carrier. It can't associate with it and I can't figure out why. Running /etc/rc.d/netif start returns almost the same result as ifconfig would. It shows lo0 and wlan0, and sometimes ath0. I still not sure what lo0 is doing. So; how do I associate with it? We can assume it's WEP security based on how the other laptop is setup. I'll give every relevant output here. After boot, with a blank rc.conf this is what ifconfig returns: msk0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=11a<TXCSUM,VLAN_MTU,VLAN_HWTAGGING,TSO4> ether 00:17:f2:29:89:3b media: Ethernet autoselect ath0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 2290 ether 00:16:cb:bb:fe:65 media: IEEE 802.11 Wireless Ethernet autoselect (autoselect) status: no carrier fwe0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=8<VLAN_MTU> ether 02:17:f2:60:ad:7e ch 1 dma -1 fwip0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500 lladdr 0.17.f2.ff.fe.60.ad.7e.a.2.ff.fe.0.0.0.0 lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384 options=3<RXCSUM,TXCSUM> inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5 inet6 ::1 prefixlen 128 inet 127.0.0.1 netmask 0xff000000 I run: ifconfig wlan0 create wlandev ath0 It returns: wlan0: bpf attached wlan0: bpf attached wlan0: Ethernet address: xx:xx:xx:xx:xx:xx Ifconfig now returns: msk0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=11a<TXCSUM,VLAN_MTU,VLAN_HWTAGGING,TSO4> ether 00:17:f2:29:89:3b media: Ethernet autoselect ath0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 2290 ether 00:16:cb:bb:fe:65 media: IEEE 802.11 Wireless Ethernet autoselect (autoselect) status: no carrier fwe0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=8<VLAN_MTU> ether 02:17:f2:60:ad:7e ch 1 dma -1 fwip0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500 lladdr 0.17.f2.ff.fe.60.ad.7e.a.2.ff.fe.0.0.0.0 lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384 options=3<RXCSUM,TXCSUM> inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5 inet6 ::1 prefixlen 128 inet 127.0.0.1 netmask 0xff000000 wlan0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500 ether 00:16:cb:bb:fe:65 media: IEEE 802.11 Wireless Ethernet autoselect (autoselect) status: no carrier ssid "" channel 1 (2412 Mhz 11b) regdomain 106 indoor ecm authmode OPEN privacy OFF txpower 20 bmiss 7 scanvalid 60 bgscan bgscanintvl 300 bgscanidle 250 roam:rssi 7 roam:rate 1 wme burst bintval 0 I run: ifconfig wlan0 up ifconfig wlan0 scan It finds my router and displays its details. I can feed it my routers details now, using: ifconfig wlan0 key value key value ... They show up in wlan0 when I run ifconfig, but it still doesn't associate. What details should I feed it, what exactly is needed? What, if anything, should I have in /etc/wpa_supplicant.conf (and if that psk is needed, is it most likely the string I mentioned above)? If I define the ssid in wpa_supplicant.conf, should I still feed it to wlan0? What process should I then use to associate it? 5 .How should I add these things to rc.conf so it will automatically do this at boot? A huge thank you in advance for any help you can give, I've spent hours crawling about the shell and I've learned quite a bit from it (I finally got the hang of vi too, from all that editing). But the sooner this is fixed, the better. *P.S. I was, and still am, wondering where the extra three devices come from (the wireless and wired were all I expected to find). lo0 is up at each boot and /etc/rc.d/netif, I have no idea what it is and can't find it in dmesg. Resources: /etc/loader.conf: Code: if_ath_load="YES" wlan_wep_load="YES" wlan_ccmp_load="YES" wlan_tkip_load="YES" /etc/wpa_supplicant.conf (I emptied it of everything unnecessary, because I was just causing errors) network={ ssid="BTVOYAGER2110-1C" } /etc/rc.conf has no network settings, I commented them out because of errors. There was my attempt to clone ath0 and feed it info, but I did if via the shell instead. I've included the output of dmesg as an attachment, in case it's useful. I'd include the boot text (which appears before login) but I don't know how to catch it into a text file. If it's needed and somebody tells me how, I will (actually, even if it's not needed, how can I view it to read?).

  Read the article

• Troubleshooting latency spikes on ESXi NFS datastores

  - by exo_cw

  I'm experiencing fsync latencies of around five seconds on NFS datastores in ESXi, triggered by certain VMs. I suspect this might be caused by VMs using NCQ/TCQ, as this does not happen with virtual IDE drives. This can be reproduced using fsync-tester (by Ted Ts'o) and ioping. For example using a Grml live system with a 8GB disk: Linux 2.6.33-grml64: root@dynip211 /mnt/sda # ./fsync-tester fsync time: 5.0391 fsync time: 5.0438 fsync time: 5.0300 fsync time: 0.0231 fsync time: 0.0243 fsync time: 5.0382 fsync time: 5.0400 [... goes on like this ...] That is 5 seconds, not milliseconds. This is even creating IO-latencies on a different VM running on the same host and datastore: root@grml /mnt/sda/ioping-0.5 # ./ioping -i 0.3 -p 20 . 4096 bytes from . (reiserfs /dev/sda): request=1 time=7.2 ms 4096 bytes from . (reiserfs /dev/sda): request=2 time=0.9 ms 4096 bytes from . (reiserfs /dev/sda): request=3 time=0.9 ms 4096 bytes from . (reiserfs /dev/sda): request=4 time=0.9 ms 4096 bytes from . (reiserfs /dev/sda): request=5 time=4809.0 ms 4096 bytes from . (reiserfs /dev/sda): request=6 time=1.0 ms 4096 bytes from . (reiserfs /dev/sda): request=7 time=1.2 ms 4096 bytes from . (reiserfs /dev/sda): request=8 time=1.1 ms 4096 bytes from . (reiserfs /dev/sda): request=9 time=1.3 ms 4096 bytes from . (reiserfs /dev/sda): request=10 time=1.2 ms 4096 bytes from . (reiserfs /dev/sda): request=11 time=1.0 ms 4096 bytes from . (reiserfs /dev/sda): request=12 time=4950.0 ms When I move the first VM to local storage it looks perfectly normal: root@dynip211 /mnt/sda # ./fsync-tester fsync time: 0.0191 fsync time: 0.0201 fsync time: 0.0203 fsync time: 0.0206 fsync time: 0.0192 fsync time: 0.0231 fsync time: 0.0201 [... tried that for one hour: no spike ...] Things I've tried that made no difference: Tested several ESXi Builds: 381591, 348481, 260247 Tested on different hardware, different Intel and AMD boxes Tested with different NFS servers, all show the same behavior: OpenIndiana b147 (ZFS sync always or disabled: no difference) OpenIndiana b148 (ZFS sync always or disabled: no difference) Linux 2.6.32 (sync or async: no difference) It makes no difference if the NFS server is on the same machine (as a virtual storage appliance) or on a different host Guest OS tested, showing problems: Windows 7 64 Bit (using CrystalDiskMark, latency spikes happen mostly during preparing phase) Linux 2.6.32 (fsync-tester + ioping) Linux 2.6.38 (fsync-tester + ioping) I could not reproduce this problem on Linux 2.6.18 VMs. Another workaround is to use virtual IDE disks (vs SCSI/SAS), but that is limiting performance and the number of drives per VM. Update 2011-06-30: The latency spikes seem to happen more often if the application writes in multiple small blocks before fsync. For example fsync-tester does this (strace output): pwrite(3, "aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa"..., 1048576, 0) = 1048576 fsync(3) = 0 ioping does this while preparing the file: [lots of pwrites] pwrite(3, "********************************"..., 4096, 1036288) = 4096 pwrite(3, "********************************"..., 4096, 1040384) = 4096 pwrite(3, "********************************"..., 4096, 1044480) = 4096 fsync(3) = 0 The setup phase of ioping almost always hangs, while fsync-tester sometimes works fine. Is someone capable of updating fsync-tester to write multiple small blocks? My C skills suck ;) Update 2011-07-02: This problem does not occur with iSCSI. I tried this with the OpenIndiana COMSTAR iSCSI server. But iSCSI does not give you easy access to the VMDK files so you can move them between hosts with snapshots and rsync. Update 2011-07-06: This is part of a wireshark capture, captured by a third VM on the same vSwitch. This all happens on the same host, no physical network involved. I've started ioping around time 20. There were no packets sent until the five second delay was over: No. Time Source Destination Protocol Info 1082 16.164096 192.168.250.10 192.168.250.20 NFS V3 WRITE Call (Reply In 1085), FH:0x3eb56466 Offset:0 Len:84 FILE_SYNC 1083 16.164112 192.168.250.10 192.168.250.20 NFS V3 WRITE Call (Reply In 1086), FH:0x3eb56f66 Offset:0 Len:84 FILE_SYNC 1084 16.166060 192.168.250.20 192.168.250.10 TCP nfs > iclcnet-locate [ACK] Seq=445 Ack=1057 Win=32806 Len=0 TSV=432016 TSER=769110 1085 16.167678 192.168.250.20 192.168.250.10 NFS V3 WRITE Reply (Call In 1082) Len:84 FILE_SYNC 1086 16.168280 192.168.250.20 192.168.250.10 NFS V3 WRITE Reply (Call In 1083) Len:84 FILE_SYNC 1087 16.168417 192.168.250.10 192.168.250.20 TCP iclcnet-locate > nfs [ACK] Seq=1057 Ack=773 Win=4163 Len=0 TSV=769110 TSER=432016 1088 23.163028 192.168.250.10 192.168.250.20 NFS V3 GETATTR Call (Reply In 1089), FH:0x0bb04963 1089 23.164541 192.168.250.20 192.168.250.10 NFS V3 GETATTR Reply (Call In 1088) Directory mode:0777 uid:0 gid:0 1090 23.274252 192.168.250.10 192.168.250.20 TCP iclcnet-locate > nfs [ACK] Seq=1185 Ack=889 Win=4163 Len=0 TSV=769821 TSER=432716 1091 24.924188 192.168.250.10 192.168.250.20 RPC Continuation 1092 24.924210 192.168.250.10 192.168.250.20 RPC Continuation 1093 24.924216 192.168.250.10 192.168.250.20 RPC Continuation 1094 24.924225 192.168.250.10 192.168.250.20 RPC Continuation 1095 24.924555 192.168.250.20 192.168.250.10 TCP nfs > iclcnet_svinfo [ACK] Seq=6893 Ack=1118613 Win=32625 Len=0 TSV=432892 TSER=769986 1096 24.924626 192.168.250.10 192.168.250.20 RPC Continuation 1097 24.924635 192.168.250.10 192.168.250.20 RPC Continuation 1098 24.924643 192.168.250.10 192.168.250.20 RPC Continuation 1099 24.924649 192.168.250.10 192.168.250.20 RPC Continuation 1100 24.924653 192.168.250.10 192.168.250.20 RPC Continuation 2nd Update 2011-07-06: There seems to be some influence from TCP window sizes. I was not able to reproduce this problem using FreeNAS (based on FreeBSD) as a NFS server. The wireshark captures showed TCP window updates to 29127 bytes in regular intervals. I did not see them with OpenIndiana, which uses larger window sizes by default. I can no longer reproduce this problem if I set the following options in OpenIndiana and restart the NFS server: ndd -set /dev/tcp tcp_recv_hiwat 8192 # default is 128000 ndd -set /dev/tcp tcp_max_buf 1048575 # default is 1048576 But this kills performance: Writing from /dev/zero to a file with dd_rescue goes from 170MB/s to 80MB/s. Update 2011-07-07: I've uploaded this tcpdump capture (can be analyzed with wireshark). In this case 192.168.250.2 is the NFS server (OpenIndiana b148) and 192.168.250.10 is the ESXi host. Things I've tested during this capture: Started "ioping -w 5 -i 0.2 ." at time 30, 5 second hang in setup, completed at time 40. Started "ioping -w 5 -i 0.2 ." at time 60, 5 second hang in setup, completed at time 70. Started "fsync-tester" at time 90, with the following output, stopped at time 120: fsync time: 0.0248 fsync time: 5.0197 fsync time: 5.0287 fsync time: 5.0242 fsync time: 5.0225 fsync time: 0.0209 2nd Update 2011-07-07: Tested another NFS server VM, this time NexentaStor 3.0.5 community edition: Shows the same problems. Update 2011-07-31: I can also reproduce this problem on the new ESXi build 4.1.0.433742.

  Read the article

• problems mounting an external IDE drive via USB in ubuntu

  - by Roy Rico

  I am having a problem connecting a specific IDE drive to my linux box. It's an old drive which I just want to get about 3 GB of files off of. INFO I am trying to connect a 200GB IDE Maxtor Drive, internally and externally... externally: I am using an self powered USB IDE external drive enclosure which I have used to connect various drives, under ubuntu and windows, in the past. The other posts stated it coudl be a problem I think i may have formatted the /dev/sdc partition instead of /dev/sdc1 partition when i originally formatted the drive. internally: I only have one machine left that has an internal IDE interface, and it's got XP on it. I plugged this drive internally into this machine with windows XP and used the ext2/ext3 drivers to mount this drive, but some files have question marks (?) in the file names which is messing up my copy process in windows. I can't delete the files under windows. Ubuntu Linux will not install on my only remaining machine that has IDE controller. I have tried the suggestions in the questions below http://superuser.com/questions/88182/mount-an-external-drive-in-ubuntu http://superuser.com/questions/23210/ubuntu-fails-to-mount-usb-drive it looks like i can see the drive in /proc/partitions $ cat /proc/partitions major minor #blocks name 8 0 78125000 sda 8 1 74894998 sda1 8 2 1 sda2 8 5 3229033 sda5 8 16 199148544 sdb <-- could be my drive? but it's not listed under fdisk -l $ fdisk -l Disk /dev/sda: 80.0 GB, 80000000000 bytes 255 heads, 63 sectors/track, 9726 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0xd0f4738c Device Boot Start End Blocks Id System /dev/sda1 * 1 9324 74894998+ 83 Linux /dev/sda2 9325 9726 3229065 5 Extended /dev/sda5 9325 9726 3229033+ 82 Linux swap / Solaris and here is my log of /var/log/messages. with a bunch of weird output, can someone let me know what that weird output is? Mar 3 19:49:40 mala kernel: [687455.112029] usb 1-7: new high speed USB device using ehci_hcd and address 3 Mar 3 19:49:41 mala kernel: [687455.248576] usb 1-7: configuration #1 chosen from 1 choice Mar 3 19:49:41 mala kernel: [687455.267450] Initializing USB Mass Storage driver... Mar 3 19:49:41 mala kernel: [687455.269180] scsi4 : SCSI emulation for USB Mass Storage devices Mar 3 19:49:41 mala kernel: [687455.269410] usbcore: registered new interface driver usb-storage Mar 3 19:49:41 mala kernel: [687455.269416] USB Mass Storage support registered. Mar 3 19:49:46 mala kernel: [687460.270917] scsi 4:0:0:0: Direct-Access Maxtor 6 Y200P0 YAR4 PQ: 0 ANSI: 2 Mar 3 19:49:46 mala kernel: [687460.271485] sd 4:0:0:0: Attached scsi generic sg2 type 0 Mar 3 19:49:46 mala kernel: [687460.278858] sd 4:0:0:0: [sdb] 398297088 512-byte logical blocks: (203 GB/189 GiB) Mar 3 19:49:46 mala kernel: [687460.280866] sd 4:0:0:0: [sdb] Write Protect is off Mar 3 19:50:16 mala kernel: [687460.283784] sdb: Mar 3 19:50:16 mala kernel: [687491.112020] usb 1-7: reset high speed USB device using ehci_hcd and address 3 Mar 3 19:50:47 mala kernel: [687522.120030] usb 1-7: reset high speed USB device using ehci_hcd and address 3 Mar 3 19:51:18 mala kernel: [687553.112034] usb 1-7: reset high speed USB device using ehci_hcd and address 3 Mar 3 19:51:49 mala kernel: [687584.116025] usb 1-7: reset high speed USB device using ehci_hcd and address 3 Mar 3 19:52:02 mala kernel: [687596.170632] type=1505 audit(1267671122.035:31): operation="profile_replace" pid=8426 name=/usr/lib/cups/backend/cups-pdf Mar 3 19:52:02 mala kernel: [687596.171551] type=1505 audit(1267671122.035:32): operation="profile_replace" pid=8426 name=/usr/sbin/cupsd Mar 3 19:52:06 mala kernel: [687600.908056] async/0 D c08145c0 0 7655 2 0x00000000 Mar 3 19:52:06 mala kernel: [687600.908062] e5601d38 00000046 e5774000 c08145c0 e4c2a848 c08145c0 d203973a 0002713d Mar 3 19:52:06 mala kernel: [687600.908072] c08145c0 c08145c0 e4c2a848 c08145c0 00000000 0002713d c08145c0 f0a98c00 Mar 3 19:52:06 mala kernel: [687600.908079] e4c2a5b0 c20125c0 00000002 e5601d80 e5601d44 c056f3be e5601d78 e5601d4c Mar 3 19:52:06 mala kernel: [687600.908087] Call Trace: Mar 3 19:52:06 mala kernel: [687600.908099] [<c056f3be>] io_schedule+0x1e/0x30 Mar 3 19:52:06 mala kernel: [687600.908107] [<c01b2cf5>] sync_page+0x35/0x40 Mar 3 19:52:06 mala kernel: [687600.908111] [<c056f8f7>] __wait_on_bit_lock+0x47/0x90 Mar 3 19:52:06 mala kernel: [687600.908115] [<c01b2cc0>] ? sync_page+0x0/0x40 Mar 3 19:52:06 mala kernel: [687600.908121] [<c020f390>] ? blkdev_readpage+0x0/0x20 Mar 3 19:52:06 mala kernel: [687600.908125] [<c01b2ca9>] __lock_page+0x79/0x80 Mar 3 19:52:06 mala kernel: [687600.908130] [<c015c130>] ? wake_bit_function+0x0/0x50 Mar 3 19:52:06 mala kernel: [687600.908135] [<c01b459f>] read_cache_page_async+0xbf/0xd0 Mar 3 19:52:06 mala kernel: [687600.908139] [<c01b45c2>] read_cache_page+0x12/0x60 Mar 3 19:52:06 mala kernel: [687600.908144] [<c0232dca>] read_dev_sector+0x3a/0x80 Mar 3 19:52:06 mala kernel: [687600.908148] [<c0233d3e>] adfspart_check_ICS+0x1e/0x160 Mar 3 19:52:06 mala kernel: [687600.908152] [<c023339f>] ? disk_name+0xaf/0xc0 Mar 3 19:52:06 mala kernel: [687600.908157] [<c0233d20>] ? adfspart_check_ICS+0x0/0x160 Mar 3 19:52:06 mala kernel: [687600.908161] [<c02334de>] check_partition+0x10e/0x180 Mar 3 19:52:06 mala kernel: [687600.908165] [<c02335f6>] rescan_partitions+0xa6/0x330 Mar 3 19:52:06 mala kernel: [687600.908171] [<c0312472>] ? kobject_get+0x12/0x20 Mar 3 19:52:06 mala kernel: [687600.908175] [<c0312472>] ? kobject_get+0x12/0x20 Mar 3 19:52:06 mala kernel: [687600.908180] [<c039fc43>] ? get_device+0x13/0x20 Mar 3 19:52:06 mala kernel: [687600.908185] [<c03c263f>] ? sd_open+0x5f/0x1b0 Mar 3 19:52:06 mala kernel: [687600.908189] [<c020fda0>] __blkdev_get+0x140/0x310 Mar 3 19:52:06 mala kernel: [687600.908194] [<c020f0ac>] ? bdget+0xec/0x100 Mar 3 19:52:06 mala kernel: [687600.908198] [<c020ff7a>] blkdev_get+0xa/0x10 Mar 3 19:52:06 mala kernel: [687600.908202] [<c0232f30>] register_disk+0x120/0x140 Mar 3 19:52:06 mala kernel: [687600.908207] [<c0308b4d>] ? blk_register_region+0x2d/0x40 Mar 3 19:52:06 mala kernel: [687600.908211] [<c03084f0>] ? exact_match+0x0/0x10 Mar 3 19:52:06 mala kernel: [687600.908216] [<c0308cf0>] add_disk+0x80/0x140 Mar 3 19:52:06 mala kernel: [687600.908221] [<c03084f0>] ? exact_match+0x0/0x10 Mar 3 19:52:06 mala kernel: [687600.908225] [<c0308860>] ? exact_lock+0x0/0x20 Mar 3 19:52:06 mala kernel: [687600.908230] [<c03c53df>] sd_probe_async+0xff/0x1c0

  Read the article

• Our embedded linux system won't recognize a USB Device if it is plugged in before powerup. Suggestions?

  - by Blaine

  We are developing on a small embedded device. This device us a gumstix overo board running OpenEmbedded linux. We have our development almost completely done, and have run into the strangest of bugs that we can't figure out. We have a USB Device (Spectrophotometer) that has a USB2.0 Connection and an external power supply for the light source. Typical behavior is that you plug in the power supply, then the USB connection to a host. When the usb connection is detected by the device, the device boots up and enables the light source and fan. The device is then able to be used by the host system. The problem is that if the device is plugged into the Gumstix before we turn on the Gumstix, the USB Device apparently is not probed by the system (and hence does not turn on). Under a normal situation, when the connection is initialized by plugging in the usb cable, the spectro turns itself on and becomes available to the system (this can be seen via "lsusb" typically). Neither of these things are happening. There is no device detected via "lsusb" and no dmesg errors of any kind that we can see. It is as if the device is not plugged in. The device does show up and work fine if we unplug the USB cable and plug it back in once the system is booted up. It turns on and shows up on the usb bus, and we can access it with our driver. On any other desktop or laptop, it does not matter if the host system is on or off when we plug in the spectrometer. This behavior is what I would consider to be "normal" - that the usb system is probed and initialized at boot time, and the usb devices come online. In other words, our system is fully functional as long as we plug in the usb device after the system is booted up. Unfortunately this isn't possible in our final product - everything comes on at once. Additional Info: 1) We have tried a flash drive attached to the system when the system is turned off. Booting up the system brings the flash drive online, as expected 2) There are no messages regarding the spectro or usb device (using dmesg). "lsusb" only lists the USB hubs / controllers. It is literally as if the device is not present and not plugged in. 3) We have tried a brand new image from gumstix and an older image from last year. Both images have this problem. This problem exists on all 3 gumstix devices we use. Does anyone have any suggestions? From what I can tell it isn't really possible to do a complete "reboot" of the usb system that is a complete emulation of "unplugging" and "replugging" a usb device. I feel like what is happening is that there is no initial probe on the usb bus that would trigger the usb handshaking, but this is somehow specific to the spectro. This seems to be a kernel issue or at least an issue in how the kernel is initializing the usb subsystem. I'm not really sure though. I have tried the gumstix mailing list, but there doesn't seem to be anyone who has seen this issue before. Any advice or suggestions on where to start looking would be fantastic. Thank you! Blaine output etc. $ uname -a Linux overo 2.6.33 #1 Tue Apr 27 08:35:38 PDT 2010 armv7l GNU/Linux When the system is up and running and spectro is plugged in (working as intended), this is lsusb: Bus 001 Device 116: ID 2457:1022 Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x2457 idProduct 0x1022 bcdDevice 0.02 iManufacturer 1 USB4000 1.01.11 iProduct 2 Ocean Optics USB4000 iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 46 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x80 (Bus Powered) MaxPower 400mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 4 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x86 EP 6 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0000 (Bus Powered) dmesg output: usb usb1: usb auto-resume hub 1-0:1.0: hub_resume usb usb2: usb auto-resume ehci-omap ehci-omap.0: resume root hub hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000 hub 2-0:1.0: hub_resume hub 2-0:1.0: state 7 ports 3 chg 0000 evt 0000 hub 1-0:1.0: hub_suspend usb usb1: bus auto-suspend hub 2-0:1.0: hub_suspend usb usb2: bus auto-suspend ehci-omap ehci-omap.0: suspend root hub usb usb2: usb resume ehci-omap ehci-omap.0: resume root hub hub 2-0:1.0: hub_resume ehci-omap ehci-omap.0: GetStatus port 2 status 001803 POWER sig=j CSC CONNECT hub 2-0:1.0: port 2: status 0501 change 0001 hub 2-0:1.0: state 7 ports 3 chg 0004 evt 0000 hub 2-0:1.0: port 2, status 0501, change 0000, 480 Mb/s ehci-omap ehci-omap.0: port 2 high speed ehci-omap ehci-omap.0: GetStatus port 2 status 001005 POWER sig=se0 PE CONNECT usb 2-2: new high speed USB device using ehci-omap and address 2 ehci-omap ehci-omap.0: port 2 high speed ehci-omap ehci-omap.0: GetStatus port 2 status 001005 POWER sig=se0 PE CONNECT usb 2-2: default language 0x0409 usb 2-2: udev 2, busnum 2, minor = 129 usb 2-2: New USB device found, idVendor=2457, idProduct=1022 usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 2-2: Product: Ocean Optics USB4000 usb 2-2: Manufacturer: USB4000 1.01.11 usb 2-2: uevent usb 2-2: usb_probe_device usb 2-2: configuration #1 chosen from 1 choice usb 2-2: uevent usb 2-2: adding 2-2:1.0 (config #1, interface 0) usb 2-2:1.0: uevent drivers/usb/core/inode.c: creating file '002' dmesg has nothing to say, and lusb simply lists nothing else but the two default usb controllers / hubs if we plug the device in before the system is turned on.

  Read the article

• Use DivX settings to encode to mp4 with ffmpeg

  - by sjngm

  I'm used to use VirtualDub to encode a video to AVI container with DivX-codec (and MP3 for audio). Now I'm planning to use ffmpeg to encode videos to MP4 container with h264-codec. What I've figured out is that I need to use libx264 and one of those presets to make anything work. However, I'm amazed about the video bitrate ffmpeg uses for encoding. What I currently have is this little batch file: @ECHO OFF SETLOCAL SET IN=source.avs SET FFMPEG_PATH=C:\Program Files (x86)\ffmpeg SET PRESET=-fpre "%FFMPEG_PATH%\presets\libx264-lossless_slow.ffpreset" SET AUDIO=-acodec libmp3lame -ab 128000 SET VIDEO=-vcodec libx264 -vb 1978000 "%FFMPEG_PATH%\ffmpeg.exe" -i %IN% %AUDIO% %VIDEO% %PRESET% test.mp4 ENDLOCAL With this I tell ffmpeg to use 1978k as the bitrate, but ffmpeg uses 15000k+! I tried other presets, but they don't use my specified bitrate. Here are the presets I have: libx264-baseline.ffpreset libx264-ipod320.ffpreset libx264-ipod640.ffpreset libx264-lossless_fast.ffpreset libx264-lossless_max.ffpreset libx264-lossless_medium.ffpreset libx264-lossless_slow.ffpreset libx264-lossless_slower.ffpreset libx264-lossless_ultrafast.ffpreset ffmpeg version: FFmpeg git-N-29181-ga304071 libavutil 50. 40. 1 / 50. 40. 1 libavcodec 52.120. 0 / 52.120. 0 libavformat 52.108. 0 / 52.108. 0 libavdevice 52. 4. 0 / 52. 4. 0 libavfilter 1. 79. 0 / 1. 79. 0 libswscale 0. 13. 0 / 0. 13. 0 Note that I don't use the latest version as it has problems with spaces in filenames. Here's what seems to be the full parameter list DivX 6.9.2 uses: -bvnn 1978000 -vbv 218691200,100663296,100663296 -dir "C:\Users\sjngm\AppData\Roaming\DivX\DivX Codec" -w -b 1 -use_presets=1 -preset=10 -windowed_fullsearch=2 -thread_delay=1 What command line parameters would that be for ffmpeg? EDIT: Going with slhck's suggestion I tried a new 32-bit version. I have no idea if that is 0.9 or newer, I can't find that info. ffmpeg version N-36890-g67f5650 libavutil 51. 34.100 / 51. 34.100 libavcodec 53. 56.105 / 53. 56.105 libavformat 53. 30.100 / 53. 30.100 libavdevice 53. 4.100 / 53. 4.100 libavfilter 2. 59.100 / 2. 59.100 libswscale 2. 1.100 / 2. 1.100 libswresample 0. 6.100 / 0. 6.100 libpostproc 51. 2.100 / 51. 2.100 I reworked my batch file to look like this (interestingly enough I can't find parameter -vprofile in the documentation): @ECHO OFF SETLOCAL SET IN=VTS_01_1.avs SET FFMPEG_PATH=C:\Program Files (x86)\ffmpeg SET PRESET=-vprofile high -preset veryslow SET AUDIO=-acodec libmp3lame -ab 128000 SET VIDEO=-vcodec libx264 -vb 1978000 "%FFMPEG_PATH%\ffmpeg.exe" -i %IN% %AUDIO% %PRESET% %VIDEO% test.mp4 ENDLOCAL I see that it now uses the bitrate properly (thanks to LongNeckbeard for pointing out that the lossless-stuff ignores the bitrate!). Just in case you wonder how I came up with the 1978000, I'm using this formula which I found valid for DivX-files (I'm guessing the bitrate won't change that much for h264): width * height * 25 * 0.22 / 1000 I'm not sure if the 0.22 correlates with the CRF somehow. Overall I forgot to say the I will use a two-pass scenario, which is why I don't use the CRF here. I will try to read more about this. Currently I'm just trying to get something running that shows me that I'm doing something right (ffmpeg isn't the easiest tool to understand ;)). C:\Program Files (x86)\ffmpeg\ffmpeg.exe" -i VTS_01_1.avs -acodec libmp3lame -ab 128000 -vcodec libx264 -vb 1978000 -vprofile high -preset veryslow test.mp4 The output is now: ffmpeg version N-36890-g67f5650 Copyright (c) 2000-2012 the FFmpeg developers built on Jan 16 2012 21:57:13 with gcc 4.6.2 configuration: --enable-gpl --enable-version3 --disable-w32threads --enable-runtime-cpudetect --enable-avisynth --enable-bzlib --enable-frei0r --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libfreetype --enable-libgsm --enable-libmp3lame --enable-libopenjpeg --enable-librtmp --enable-libschroedinger --enable-libspeex --enable-libtheora --enable-libvo-aacenc --enable-libvo-amrwbenc --enable-libvorbis --enable-libvpx --enable-libx264 --enable-libxavs --enable-libxvid --enable-zlib libavutil 51. 34.100 / 51. 34.100 libavcodec 53. 56.105 / 53. 56.105 libavformat 53. 30.100 / 53. 30.100 libavdevice 53. 4.100 / 53. 4.100 libavfilter 2. 59.100 / 2. 59.100 libswscale 2. 1.100 / 2. 1.100 libswresample 0. 6.100 / 0. 6.100 libpostproc 51. 2.100 / 51. 2.100 Input #0, avs, from 'VTS_01_1.avs': Duration: 00:58:46.12, start: 0.000000, bitrate: 0 kb/s Stream #0:0: Video: rawvideo (YV12 / 0x32315659), yuv420p, 576x448, 77414 kb/s, 25 tbr, 25 tbn, 25 tbc Stream #0:1: Audio: pcm_s16le ([1][0][0][0] / 0x0001), 48000 Hz, 2 channels, s16, 1536 kb/s File 'test.mp4' already exists. Overwrite ? [y/N] y w:576 h:448 pixfmt:yuv420p tb:1/1000000 sar:0/1 sws_param: [libx264 @ 05A2C400] using cpu capabilities: MMX2 SSE2Fast FastShuffle SSEMisalign LZCNT [libx264 @ 05A2C400] profile High, level 3.1 [libx264 @ 05A2C400] 264 - core 120 r2120 0c7dab9 - H.264/MPEG-4 AVC codec - Copyleft 2003-2011 - http://www.videolan.org/x264.html - options: cabac=1 ref=16 deblock=1:0:0 analyse=0x3:0x133 me=umh subme=10 psy=1 psy_rd=1.00:0.00 mixed_ref=1 me_range=24 chroma_me=1 trellis=2 8x8dct=1 cqm=0 deadzone=21,11 fast_pskip=1 chroma_qp_offset=-2 threads=3 sliced_threads=0 nr=0 decimate=1 interlaced=0 bluray_compat=0 constrained_intra=0 bframes=8 b_pyramid=2 b_adapt=2 b_bias=0 direct=3 weightb=1 open_gop=0 weightp=2 keyint=250 keyint_min=25 scenecut=40 intra_refresh=0 rc_lookahead=60 rc=abr mbtree=1 bitrate=1978 ratetol=1.0 qcomp=0.60 qpmin=0 qpmax=69 qpstep=4 ip_ratio=1.40 aq=1:1.00 Output #0, mp4, to 'test.mp4': Metadata: encoder : Lavf53.30.100 Stream #0:0: Video: h264 (![0][0][0] / 0x0021), yuv420p, 576x448, q=-1--1, 1978 kb/s, 25 tbn, 25 tbc Stream #0:1: Audio: mp3 (i[0][0][0] / 0x0069), 48000 Hz, 2 channels, s16, 128 kb/s Stream mapping: Stream #0:0 -> #0:0 (rawvideo -> libx264) Stream #0:1 -> #0:1 (pcm_s16le -> libmp3lame) Press [q] to stop, [?] for help frame= 0 fps= 0 q=0.0 size= 0kB time=00:00:00.00 bitrate= 0.0kbits/s frame= 0 fps= 0 q=0.0 size= 0kB time=00:00:00.00 bitrate= 0.0kbits/s frame= 0 fps= 0 q=0.0 size= 0kB time=00:00:00.00 bitrate= 0.0kbits/s frame= 3 fps= 1 q=22.0 size= 39kB time=00:00:00.04 bitrate=8063.8kbits/ frame= 8 fps= 2 q=22.0 size= 82kB time=00:00:00.24 bitrate=2801.3kbits/ frame= 13 fps= 3 q=23.0 size= 120kB time=00:00:00.44 bitrate=2229.5kbits/ frame= 16 fps= 4 q=23.0 size= 147kB time=00:00:00.56 bitrate=2156.7kbits/ frame= 20 fps= 4 q=22.0 size= 175kB time=00:00:00.72 bitrate=1987.4kbits/ : video:4387kB audio:273kB global headers:0kB muxing overhead 0.260038% [libx264 @ 05A2C400] frame I:2 Avg QP:19.53 size: 29850 [libx264 @ 05A2C400] frame P:76 Avg QP:22.24 size: 19541 [libx264 @ 05A2C400] frame B:359 Avg QP:25.93 size: 8210 [libx264 @ 05A2C400] consecutive B-frames: 0.5% 0.5% 0.0% 8.2% 17.2% 52.2% 16.0% 5.5% 0.0% [libx264 @ 05A2C400] mb I I16..4: 5.4% 75.3% 19.3% [libx264 @ 05A2C400] mb P I16..4: 1.3% 16.5% 2.2% P16..4: 36.3% 28.6% 12.7% 1.8% 0.2% skip: 0.4% [libx264 @ 05A2C400] mb B I16..4: 0.4% 3.8% 0.3% B16..8: 40.0% 18.4% 4.7% direct:18.5% skip:13.9% L0:45.4% L1:38.1% BI:16.5% [libx264 @ 05A2C400] final ratefactor: 20.35 [libx264 @ 05A2C400] 8x8 transform intra:83.1% inter:68.5% [libx264 @ 05A2C400] direct mvs spatial:99.2% temporal:0.8% [libx264 @ 05A2C400] coded y,uvDC,uvAC intra: 64.9% 83.4% 49.2% inter: 49.0% 50.4% 4.4% [libx264 @ 05A2C400] i16 v,h,dc,p: 25% 22% 27% 26% [libx264 @ 05A2C400] i8 v,h,dc,ddl,ddr,vr,hd,vl,hu: 10% 7% 23% 9% 10% 10% 10%10% 13% [libx264 @ 05A2C400] i4 v,h,dc,ddl,ddr,vr,hd,vl,hu: 12% 11% 13% 9% 12% 11% 10% 9% 12% [libx264 @ 05A2C400] i8c dc,h,v,p: 42% 28% 16% 14% [libx264 @ 05A2C400] Weighted P-Frames: Y:18.4% UV:7.9% [libx264 @ 05A2C400] ref P L0: 29.1% 11.3% 15.7% 7.3% 6.9% 4.9% 5.1% 3.4%3.9% 2.7% 2.8% 1.8% 1.7% 1.2% 1.4% 0.9% [libx264 @ 05A2C400] ref B L0: 68.8% 11.4% 5.5% 2.9% 2.3% 1.9% 1.5% 1.1%1.1% 1.0% 0.9% 0.7% 0.5% 0.3% 0.1% [libx264 @ 05A2C400] ref B L1: 91.9% 8.1% [libx264 @ 05A2C400] kb/s:2055.88 As far as I'm concerned it doesn't look that bad to me.

  Read the article

• Why do ICMP Redirct Host happen?

  - by El Barto

  I'm setting up a Debian box as a router for 4 subnets. For that I have defined 4 virtual interfaces on the NIC where the LAN is connected (eth1). eth1 Link encap:Ethernet HWaddr 94:0c:6d:82:0d:98 inet addr:10.1.1.1 Bcast:10.1.1.255 Mask:255.255.255.0 inet6 addr: fe80::960c:6dff:fe82:d98/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:6026521 errors:0 dropped:0 overruns:0 frame:0 TX packets:35331299 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:673201397 (642.0 MiB) TX bytes:177276932 (169.0 MiB) Interrupt:19 Base address:0x6000 eth1:0 Link encap:Ethernet HWaddr 94:0c:6d:82:0d:98 inet addr:10.1.2.1 Bcast:10.1.2.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Interrupt:19 Base address:0x6000 eth1:1 Link encap:Ethernet HWaddr 94:0c:6d:82:0d:98 inet addr:10.1.3.1 Bcast:10.1.3.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Interrupt:19 Base address:0x6000 eth1:2 Link encap:Ethernet HWaddr 94:0c:6d:82:0d:98 inet addr:10.1.4.1 Bcast:10.1.4.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Interrupt:19 Base address:0x6000 eth2 Link encap:Ethernet HWaddr 6c:f0:49:a4:47:38 inet addr:192.168.1.10 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::6ef0:49ff:fea4:4738/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:199809345 errors:0 dropped:0 overruns:0 frame:0 TX packets:158362936 errors:0 dropped:0 overruns:0 carrier:1 collisions:0 txqueuelen:1000 RX bytes:3656983762 (3.4 GiB) TX bytes:1715848473 (1.5 GiB) Interrupt:27 eth3 Link encap:Ethernet HWaddr 94:0c:6d:82:c8:72 inet addr:192.168.2.5 Bcast:192.168.2.255 Mask:255.255.255.0 inet6 addr: fe80::960c:6dff:fe82:c872/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:110814 errors:0 dropped:0 overruns:0 frame:0 TX packets:73386 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:16044901 (15.3 MiB) TX bytes:42125647 (40.1 MiB) Interrupt:20 Base address:0x2000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:22351 errors:0 dropped:0 overruns:0 frame:0 TX packets:22351 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:2625143 (2.5 MiB) TX bytes:2625143 (2.5 MiB) tun0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:10.8.0.1 P-t-P:10.8.0.2 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1 RX packets:41358924 errors:0 dropped:0 overruns:0 frame:0 TX packets:23116350 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:3065505744 (2.8 GiB) TX bytes:1324358330 (1.2 GiB) I have two other computers connected to this network. One has IP 10.1.1.12 (subnet mask 255.255.255.0) and the other one 10.1.2.20 (subnet mask 255.255.255.0). I want to be able to reach 10.1.1.12 from 10.1.2.20. Since packet forwarding is enabled in the router and the policy of the FORWARD chain is ACCEPT (and there are no other rules), I understand that there should be no problem to ping from 10.1.2.20 to 10.1.1.12 going through the router. However, this is what I get: $ ping -c15 10.1.1.12 PING 10.1.1.12 (10.1.1.12): 56 data bytes Request timeout for icmp_seq 0 92 bytes from router2.mydomain.com (10.1.2.1): Redirect Host(New addr: 10.1.1.12) Vr HL TOS Len ID Flg off TTL Pro cks Src Dst 4 5 00 0054 81d4 0 0000 3f 01 e2b3 10.1.2.20 10.1.1.12 Request timeout for icmp_seq 1 92 bytes from router2.mydomain.com (10.1.2.1): Redirect Host(New addr: 10.1.1.12) Vr HL TOS Len ID Flg off TTL Pro cks Src Dst 4 5 00 0054 899b 0 0000 3f 01 daec 10.1.2.20 10.1.1.12 Request timeout for icmp_seq 2 92 bytes from router2.mydomain.com (10.1.2.1): Redirect Host(New addr: 10.1.1.12) Vr HL TOS Len ID Flg off TTL Pro cks Src Dst 4 5 00 0054 78fe 0 0000 3f 01 eb89 10.1.2.20 10.1.1.12 Request timeout for icmp_seq 3 92 bytes from router2.mydomain.com (10.1.2.1): Redirect Host(New addr: 10.1.1.12) Vr HL TOS Len ID Flg off TTL Pro cks Src Dst 4 5 00 0054 14b8 0 0000 3f 01 4fd0 10.1.2.20 10.1.1.12 Request timeout for icmp_seq 4 92 bytes from router2.mydomain.com (10.1.2.1): Redirect Host(New addr: 10.1.1.12) Vr HL TOS Len ID Flg off TTL Pro cks Src Dst 4 5 00 0054 8ef7 0 0000 3f 01 d590 10.1.2.20 10.1.1.12 Request timeout for icmp_seq 5 92 bytes from router2.mydomain.com (10.1.2.1): Redirect Host(New addr: 10.1.1.12) Vr HL TOS Len ID Flg off TTL Pro cks Src Dst 4 5 00 0054 ec9d 0 0000 3f 01 77ea 10.1.2.20 10.1.1.12 Request timeout for icmp_seq 6 92 bytes from router2.mydomain.com (10.1.2.1): Redirect Host(New addr: 10.1.1.12) Vr HL TOS Len ID Flg off TTL Pro cks Src Dst 4 5 00 0054 70e6 0 0000 3f 01 f3a1 10.1.2.20 10.1.1.12 Request timeout for icmp_seq 7 92 bytes from router2.mydomain.com (10.1.2.1): Redirect Host(New addr: 10.1.1.12) Vr HL TOS Len ID Flg off TTL Pro cks Src Dst 4 5 00 0054 b0d2 0 0000 3f 01 b3b5 10.1.2.20 10.1.1.12 Request timeout for icmp_seq 8 92 bytes from router2.mydomain.com (10.1.2.1): Redirect Host(New addr: 10.1.1.12) Vr HL TOS Len ID Flg off TTL Pro cks Src Dst 4 5 00 0054 f8b4 0 0000 3f 01 6bd3 10.1.2.20 10.1.1.12 Request timeout for icmp_seq 9 Request timeout for icmp_seq 10 92 bytes from router2.mydomain.com (10.1.2.1): Redirect Host(New addr: 10.1.1.12) Vr HL TOS Len ID Flg off TTL Pro cks Src Dst 4 5 00 0054 1c95 0 0000 3f 01 47f3 10.1.2.20 10.1.1.12 Request timeout for icmp_seq 11 Request timeout for icmp_seq 12 Request timeout for icmp_seq 13 92 bytes from router2.mydomain.com (10.1.2.1): Redirect Host(New addr: 10.1.1.12) Vr HL TOS Len ID Flg off TTL Pro cks Src Dst 4 5 00 0054 62bc 0 0000 3f 01 01cc 10.1.2.20 10.1.1.12 Why does this happen? From what I've read the Redirect Host response has something to do with the fact that the two hosts are in the same network and there being a shorter route (or so I understood). They are in fact in the same physical network, but why would there be a better route if they are not on the same subnet (they can't see each other)? What am I missing? Some extra info you might want to see: # route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 10.8.0.2 0.0.0.0 255.255.255.255 UH 0 0 0 tun0 127.0.0.1 0.0.0.0 255.255.255.255 UH 0 0 0 lo 192.168.2.0 0.0.0.0 255.255.255.0 U 0 0 0 eth3 10.8.0.0 10.8.0.2 255.255.255.0 UG 0 0 0 tun0 192.168.1.0 0.0.0.0 255.255.255.0 U 1 0 0 eth2 10.1.4.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 10.1.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 10.1.2.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 10.1.3.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 eth2 0.0.0.0 192.168.2.1 0.0.0.0 UG 100 0 0 eth3 # iptables -L -n Chain INPUT (policy ACCEPT) target prot opt source destination Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination # iptables -L -n -t nat Chain PREROUTING (policy ACCEPT) target prot opt source destination Chain POSTROUTING (policy ACCEPT) target prot opt source destination MASQUERADE all -- !10.0.0.0/8 10.0.0.0/8 MASQUERADE all -- 10.0.0.0/8 !10.0.0.0/8 Chain OUTPUT (policy ACCEPT) target prot opt source destination

  Read the article

• Trying to configure HWIC-3G-HSPA

  - by user1174838

  I'm trying to configure a couple of Cisco 1941 routes. The are both identical routers. Each as a HWIC-1T (Smart Serial interface) and a HWIC-3G-HSPA 3G interface. These routers are to be sent to remote sites. We have connectivity to one of the sites but if remote site A gors down we lose connectivity to remote site B. The HWIC-1T is the primary WAN interface using frame relay joining the two remote sites We want the HWIC-3G-HSPA to be usable for direct connectivity from head office to remote site B, and also the HWIC-3G-HSPA is do be used for comms between the remote sites when the frame relay is down (happens quite a bit). I initialy tried to do dynamic routing using EIGRP however in my lab setup of laptop - 1941 - 1941 - laptop, I was unable to get end to end connectivity. I later settled on static routing and have got end to end connectivity but only over frame relay, not the HWIC-3G-HSPA. The sanitized running config for remote site A: version 15.1 service tcp-keepalives-in service tcp-keepalives-out service timestamps debug datetime msec service timestamps log datetime msec service password-encryption service udp-small-servers service tcp-small-servers ! hostname remoteA ! boot-start-marker boot-end-marker ! ! logging buffered 51200 warnings enable secret 5 censored ! no aaa new-model clock timezone wst 8 0 ! no ipv6 cef ip source-route ip cef ! ip domain name yourdomain.com multilink bundle-name authenticated ! chat-script gsm "" "ATDT*98*1#" TIMEOUT 30 "CONNECT" ! username admin privilege 15 secret 5 censored ! controller Cellular 0/1 ! interface Embedded-Service-Engine0/0 no ip address shutdown ! interface GigabitEthernet0/0 ip address 192.168.2.5 255.255.255.0 duplex auto speed auto ! interface GigabitEthernet0/1 no ip address shutdown duplex auto speed auto ! interface Serial0/0/0 ip address 10.1.1.2 255.255.255.252 encapsulation frame-relay cdp enable frame-relay interface-dlci 16 frame-relay lmi-type ansi ! interface Cellular0/1/0 ip address negotiated encapsulation ppp dialer in-band dialer idle-timeout 2147483 dialer string gsm dialer-group 1 async mode interactive ppp chap hostname censored ppp chap password 7 censored cdp enable ! interface Cellular0/1/1 no ip address encapsulation ppp ! interface Dialer0 no ip address ! ip forward-protocol nd ! no ip http server no ip http secure-server ! ip route 0.0.0.0 0.0.0.0 Serial0/0/0 210 permanent ip route 0.0.0.0 0.0.0.0 Cellular0/1/0 220 permanent ip route 172.31.2.0 255.255.255.0 Cellular0/1/0 permanent ip route 192.168.3.0 255.255.255.0 10.1.1.1 permanent ip route 192.168.3.0 255.255.255.0 Cellular0/1/0 210 permanent ! access-list 1 permit any dialer-list 1 protocol ip list 1 ! control-plane ! line con 0 logging synchronous login local line aux 0 line 2 no activation-character no exec transport preferred none transport input all transport output pad telnet rlogin lapb-ta mop udptn v120 ssh stopbits 1 line 0/1/0 exec-timeout 0 0 script dialer gsm login modem InOut no exec transport input all rxspeed 7200000 txspeed 5760000 line 0/1/1 no exec rxspeed 7200000 txspeed 5760000 line vty 0 4 access-class 23 in privilege level 15 password 7 censored login local transport input all line vty 5 15 access-class 23 in privilege level 15 password 7 censored login local transport input all line vty 16 1370 password 7 censored login transport input all ! scheduler allocate 20000 1000 end The sanitized running config for remote site B: version 15.1 service tcp-keepalives-in service tcp-keepalives-out service timestamps debug datetime msec service timestamps log datetime msec service password-encryption service udp-small-servers service tcp-small-servers ! hostname remoteB ! boot-start-marker boot-end-marker ! logging buffered 51200 warnings enable secret 5 censored ! no aaa new-model clock timezone wst 8 0 ! no ipv6 cef ip source-route ip cef ! no ip domain lookup ip domain name yourdomain.com multilink bundle-name authenticated ! chat-script gsm "" "ATDT*98*1#" TIMEOUT 30 "CONNECT" username admin privilege 15 secret 5 censored ! controller Cellular 0/1 ! interface Embedded-Service-Engine0/0 no ip address shutdown ! interface GigabitEthernet0/0 ip address 192.168.3.1 255.255.255.0 duplex auto speed auto ! interface GigabitEthernet0/1 no ip address shutdown duplex auto speed auto ! interface Serial0/0/0 ip address 10.1.1.1 255.255.255.252 encapsulation frame-relay clock rate 2000000 cdp enable frame-relay interface-dlci 16 frame-relay lmi-type ansi frame-relay intf-type dce ! interface Cellular0/1/0 ip address negotiated encapsulation ppp dialer in-band dialer idle-timeout 2147483 dialer string gsm dialer-group 1 async mode interactive ppp chap hostname censored ppp chap password 7 censored ppp ipcp dns request cdp enable ! interface Cellular0/1/1 no ip address encapsulation ppp ! interface Dialer0 no ip address ! ip forward-protocol nd ! no ip http server no ip http secure-server ! ip route 0.0.0.0 0.0.0.0 Serial0/0/0 210 permanent ip route 0.0.0.0 0.0.0.0 Cellular0/1/0 220 permanent ip route 172.31.2.0 255.255.255.0 Cellular0/1/0 permanent ip route 192.168.2.0 255.255.255.0 10.1.1.2 permanent ip route 192.168.2.0 255.255.255.0 Cellular0/1/0 210 permanent ! kron occurrence PING in 1 recurring policy-list ICMP ! access-list 1 permit any dialer-list 1 protocol ip list 1 ! control-plane ! line con 0 logging synchronous login local line aux 0 line 2 no activation-character no exec transport preferred none transport input all transport output pad telnet rlogin lapb-ta mop udptn v120 ssh stopbits 1 line 0/1/0 exec-timeout 0 0 script dialer gsm login modem InOut no exec transport input all rxspeed 7200000 txspeed 5760000 line 0/1/1 no exec rxspeed 7200000 txspeed 5760000 line vty 0 4 access-class 23 in privilege level 15 password 7 censored login transport input all line vty 5 15 access-class 23 in privilege level 15 password 7 censored login transport input all line vty 16 1370 password 7 censored login transport input all ! scheduler allocate 20000 1000 end The last problem I'm having is the 3G interfaces go down after only a few minutes of inactivity. I've tried using kron to ping the local HWIC-3G-HSPA interface (cellular 0/1/0) every minute but that hasn't been successful. Manually pinging the IP assigned (by the telco) to ce0/1/0 does bring the interface up. Any ideas? Thanks

  Read the article

• Alternate way to create a clone of a UNIX System

  - by Spirit

  THE STORY: (If you don't like to read much, down below is the question :) ) Where I work we have two HP RP2470 servers same hardware same number of hard drives same everything :). One of them is a production server and runs HP-UX 11.00. The poor ba***rd hasn't been turned off for years and now I have to make a clone of it on the other server - just in case, for redundancy. The problem is simple (or not simple) as I have to make the the other server exactly the same. However the old version of OS (UX 11.00 is a history now) and the old software running on it, have made my task almost impossible. On the production server there is also a cloning/recover utility Ignite-UX. I tried many times to create a recovery tape with it. Then when I load the tape on the backup server, it succeeds with the loading of the tape (no errors no warnings) but on the next restart it fails to load the OS :S and drops into HP`s ISL prompt. --- THE QUESTION: Is there an alternate way to create a clone of the Unix System? The environment is: 1. 2x HP RP2470 Servers (non-Intel), same hardware, same number od HDDs (two each of them) same everything. 2. OS running: HP-UX 11.00 The production server has to be cloned without downtime - sadly :( as I hope that they will reconsider on this one For example (like on Windows platforms), if you try to copy an entire HDD with Windows inside on another HDD, and then put that HDD on another PC it will still work, as long as the hardware is the same. Can I do something like that with a Unix system? Can I somehow COPY the contents of the entire HDD, put those on another HDD, and then just load the HDD into the other server? (If you haven't read the story the servers are exactly the same) Will it work? Can it be done with ordinary commands like cp or dump or something like that? Does any one have a similar experience? --- UPDATE: 26.01.2012 NOTE: The update is related to "The Story". If you haven't read that part then you can skip this update. This is just a short update on the recover logs from the Ignite Tape.. someone with more exp. might notice something.. ... --- READING CONTENTS OF THE IGNITE TAPE --- --- OUTPUT OMITED --- ... ... x ./configure3, 413696 bytes, 808 tape blocks x ./monitor_bpr, 20480 bytes, 40 tape blocks * Download_mini-system: Complete * Loading_software: Begin * Installing boot area on disk. * Enabling swap areas. * Backing up LVM configuration for "vg00". * Processing the archive source (Recovery Archive). * Wed Jan 25 15:27:32 EST 2012: Starting archive load of the source (Recovery Archive). * Positioning the tape (/dev/rmt/0mn). * Archive extraction from tape is beginning. Please wait. * Wed Jan 25 15:39:52 EST 2012: Completed archive load of the source (Recovery Archive). * Executing user specified script: "/opt/ignite/data/scripts/os_arch_post_l". * Running in recovery mode (os_arch_post_l). * Running the ioinit command ("/sbin/ioinit -c") * Creating device files via the insf command. insf: Installing special files for sdisk instance 0 address 0/0/1/1.15.0 insf: Installing special files for sdisk instance 1 address 0/0/2/0.1.0 insf: Installing special files for sdisk instance 2 address 0/0/2/1.15.0 insf: Installing special files for stape instance 0 address 0/0/1/0.3.0 insf: Installing special files for btlan instance 0 address 0/0/0/0 insf: Installing special files for btlan instance 1 address 0/2/0/0 insf: Installing special files for pseudo driver dlpi insf: Installing special files for pseudo driver kepd insf: Installing special files for pseudo driver framebuf insf: Installing special files for pseudo driver sad * Running "/opt/upgrade/bin/tlinstall -v" and correcting transition link permissions. * Constructing the bootconf file. * Setting primary boot path to "0/0/1/1.15.0". * Executing: "/var/adm/sw/products/PHSS_20146/pfiles/iux_postload". * Executing: "/var/adm/sw/products/PHSS_25982/pfiles/iux_postload". NOTE: tlinstall is searching filesystem - please be patient NOTE: Successfully completed * Loading_software: Complete * Build_Kernel: Begin NOTE: Since the /stand/vmunix kernel is already in place, the kernel will not be re-built. Note that no mod_kernel directives will be processed. * Build_Kernel: Complete * Boot_From_Client_Disk: Begin * Rebooting machine as expected. NOTE: Rebooting system. sync'ing disks (0 buffers to flush): 0 buffers not flushed 0 buffers still dirty Closing open logical volumes... Done Console reset done. Boot device reset done. ********** VIRTUAL FRONT PANEL ********** System Boot detected ***************************************** LEDs: RUN ATTENTION FAULT REMOTE POWER FLASH OFF OFF ON ON LED State: Running non-OS code. (i.e. Boot or Diagnostics) ... ... ... --- SERVER IS PERFORMING POST SEQUENCE HERE --- --- OUTPUT OMITED --- ... ... ... ***************************************** ************ EARLY BOOT VFP ************* End of early boot detected ***************************************** Firmware Version 43.50 Duplex Console IO Dependent Code (IODC) revision 1 ------------------------------------------------------------------------------ (c) Copyright 1995-2002, Hewlett-Packard Company, All rights reserved ------------------------------------------------------------------------------ Processor Speed State CoProcessor State Cache Size Number State Inst Data --------- -------- --------------------- ----------------- ------------ 0 650 MHz Active Functional 750 KB 1.5 MB 1 650 MHz Idle Functional 750 KB 1.5 MB Central Bus Speed (in MHz) : 120 Available Memory : 2097152 KB Good Memory Required : 16140 KB Primary boot path: 0/0/1/1.15 Alternate boot path: 0/0/2/1.15 Console path: 0/0/4/1.643 Keyboard path: 0/0/4/0.0 Processor is starting autoboot process. To discontinue, press any key within 10 seconds. 10 seconds expired. Proceeding... Trying Primary Boot Path ------------------------ Booting... Boot IO Dependent Code (IODC) revision 1 HARD Booted. ISL Revision A.00.38 OCT 26, 1994 ISL booting hpux ISL>

  Read the article

• Why do ICMP Redirect Host happen?

  - by El Barto

  I'm setting up a Debian box as a router for 4 subnets. For that I have defined 4 virtual interfaces on the NIC where the LAN is connected (eth1). eth1 Link encap:Ethernet HWaddr 94:0c:6d:82:0d:98 inet addr:10.1.1.1 Bcast:10.1.1.255 Mask:255.255.255.0 inet6 addr: fe80::960c:6dff:fe82:d98/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:6026521 errors:0 dropped:0 overruns:0 frame:0 TX packets:35331299 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:673201397 (642.0 MiB) TX bytes:177276932 (169.0 MiB) Interrupt:19 Base address:0x6000 eth1:0 Link encap:Ethernet HWaddr 94:0c:6d:82:0d:98 inet addr:10.1.2.1 Bcast:10.1.2.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Interrupt:19 Base address:0x6000 eth1:1 Link encap:Ethernet HWaddr 94:0c:6d:82:0d:98 inet addr:10.1.3.1 Bcast:10.1.3.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Interrupt:19 Base address:0x6000 eth1:2 Link encap:Ethernet HWaddr 94:0c:6d:82:0d:98 inet addr:10.1.4.1 Bcast:10.1.4.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Interrupt:19 Base address:0x6000 eth2 Link encap:Ethernet HWaddr 6c:f0:49:a4:47:38 inet addr:192.168.1.10 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::6ef0:49ff:fea4:4738/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:199809345 errors:0 dropped:0 overruns:0 frame:0 TX packets:158362936 errors:0 dropped:0 overruns:0 carrier:1 collisions:0 txqueuelen:1000 RX bytes:3656983762 (3.4 GiB) TX bytes:1715848473 (1.5 GiB) Interrupt:27 eth3 Link encap:Ethernet HWaddr 94:0c:6d:82:c8:72 inet addr:192.168.2.5 Bcast:192.168.2.255 Mask:255.255.255.0 inet6 addr: fe80::960c:6dff:fe82:c872/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:110814 errors:0 dropped:0 overruns:0 frame:0 TX packets:73386 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:16044901 (15.3 MiB) TX bytes:42125647 (40.1 MiB) Interrupt:20 Base address:0x2000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:22351 errors:0 dropped:0 overruns:0 frame:0 TX packets:22351 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:2625143 (2.5 MiB) TX bytes:2625143 (2.5 MiB) tun0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:10.8.0.1 P-t-P:10.8.0.2 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1 RX packets:41358924 errors:0 dropped:0 overruns:0 frame:0 TX packets:23116350 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:3065505744 (2.8 GiB) TX bytes:1324358330 (1.2 GiB) I have two other computers connected to this network. One has IP 10.1.1.12 (subnet mask 255.255.255.0) and the other one 10.1.2.20 (subnet mask 255.255.255.0). I want to be able to reach 10.1.1.12 from 10.1.2.20. Since packet forwarding is enabled in the router and the policy of the FORWARD chain is ACCEPT (and there are no other rules), I understand that there should be no problem to ping from 10.1.2.20 to 10.1.1.12 going through the router. However, this is what I get: $ ping -c15 10.1.1.12 PING 10.1.1.12 (10.1.1.12): 56 data bytes Request timeout for icmp_seq 0 92 bytes from router2.mydomain.com (10.1.2.1): Redirect Host(New addr: 10.1.1.12) Vr HL TOS Len ID Flg off TTL Pro cks Src Dst 4 5 00 0054 81d4 0 0000 3f 01 e2b3 10.1.2.20 10.1.1.12 Request timeout for icmp_seq 1 92 bytes from router2.mydomain.com (10.1.2.1): Redirect Host(New addr: 10.1.1.12) Vr HL TOS Len ID Flg off TTL Pro cks Src Dst 4 5 00 0054 899b 0 0000 3f 01 daec 10.1.2.20 10.1.1.12 Request timeout for icmp_seq 2 92 bytes from router2.mydomain.com (10.1.2.1): Redirect Host(New addr: 10.1.1.12) Vr HL TOS Len ID Flg off TTL Pro cks Src Dst 4 5 00 0054 78fe 0 0000 3f 01 eb89 10.1.2.20 10.1.1.12 Request timeout for icmp_seq 3 92 bytes from router2.mydomain.com (10.1.2.1): Redirect Host(New addr: 10.1.1.12) Vr HL TOS Len ID Flg off TTL Pro cks Src Dst 4 5 00 0054 14b8 0 0000 3f 01 4fd0 10.1.2.20 10.1.1.12 Request timeout for icmp_seq 4 92 bytes from router2.mydomain.com (10.1.2.1): Redirect Host(New addr: 10.1.1.12) Vr HL TOS Len ID Flg off TTL Pro cks Src Dst 4 5 00 0054 8ef7 0 0000 3f 01 d590 10.1.2.20 10.1.1.12 Request timeout for icmp_seq 5 92 bytes from router2.mydomain.com (10.1.2.1): Redirect Host(New addr: 10.1.1.12) Vr HL TOS Len ID Flg off TTL Pro cks Src Dst 4 5 00 0054 ec9d 0 0000 3f 01 77ea 10.1.2.20 10.1.1.12 Request timeout for icmp_seq 6 92 bytes from router2.mydomain.com (10.1.2.1): Redirect Host(New addr: 10.1.1.12) Vr HL TOS Len ID Flg off TTL Pro cks Src Dst 4 5 00 0054 70e6 0 0000 3f 01 f3a1 10.1.2.20 10.1.1.12 Request timeout for icmp_seq 7 92 bytes from router2.mydomain.com (10.1.2.1): Redirect Host(New addr: 10.1.1.12) Vr HL TOS Len ID Flg off TTL Pro cks Src Dst 4 5 00 0054 b0d2 0 0000 3f 01 b3b5 10.1.2.20 10.1.1.12 Request timeout for icmp_seq 8 92 bytes from router2.mydomain.com (10.1.2.1): Redirect Host(New addr: 10.1.1.12) Vr HL TOS Len ID Flg off TTL Pro cks Src Dst 4 5 00 0054 f8b4 0 0000 3f 01 6bd3 10.1.2.20 10.1.1.12 Request timeout for icmp_seq 9 Request timeout for icmp_seq 10 92 bytes from router2.mydomain.com (10.1.2.1): Redirect Host(New addr: 10.1.1.12) Vr HL TOS Len ID Flg off TTL Pro cks Src Dst 4 5 00 0054 1c95 0 0000 3f 01 47f3 10.1.2.20 10.1.1.12 Request timeout for icmp_seq 11 Request timeout for icmp_seq 12 Request timeout for icmp_seq 13 92 bytes from router2.mydomain.com (10.1.2.1): Redirect Host(New addr: 10.1.1.12) Vr HL TOS Len ID Flg off TTL Pro cks Src Dst 4 5 00 0054 62bc 0 0000 3f 01 01cc 10.1.2.20 10.1.1.12 Why does this happen? From what I've read the Redirect Host response has something to do with the fact that the two hosts are in the same network and there being a shorter route (or so I understood). They are in fact in the same physical network, but why would there be a better route if they are not on the same subnet (they can't see each other)? What am I missing? Some extra info you might want to see: # route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 10.8.0.2 0.0.0.0 255.255.255.255 UH 0 0 0 tun0 127.0.0.1 0.0.0.0 255.255.255.255 UH 0 0 0 lo 192.168.2.0 0.0.0.0 255.255.255.0 U 0 0 0 eth3 10.8.0.0 10.8.0.2 255.255.255.0 UG 0 0 0 tun0 192.168.1.0 0.0.0.0 255.255.255.0 U 1 0 0 eth2 10.1.4.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 10.1.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 10.1.2.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 10.1.3.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 eth2 0.0.0.0 192.168.2.1 0.0.0.0 UG 100 0 0 eth3 # iptables -L -n Chain INPUT (policy ACCEPT) target prot opt source destination Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination # iptables -L -n -t nat Chain PREROUTING (policy ACCEPT) target prot opt source destination Chain POSTROUTING (policy ACCEPT) target prot opt source destination MASQUERADE all -- !10.0.0.0/8 10.0.0.0/8 MASQUERADE all -- 10.0.0.0/8 !10.0.0.0/8 Chain OUTPUT (policy ACCEPT) target prot opt source destination

  Read the article

• MySQL hangs if connection comes from outside the LAN

  - by Subito

  I have a MySQL Server operating just fine if I access him from his local LAN (192.168.100.0/24). If I try to access hin from another LAN (192.168.113.0/24 in this case) it hangs for a really long time before delivering the result. SHOW PROCESSLIST; shows this process in Sleep, State empty. If I strace -p this process I get the following Output (23512 is the PID of the corresponding mysqld process): Process 23512 attached - interrupt to quit restart_syscall(<... resuming interrupted call ...>) = 1 fcntl(10, F_GETFL) = 0x2 (flags O_RDWR) fcntl(10, F_SETFL, O_RDWR|O_NONBLOCK) = 0 accept(10, {sa_family=AF_INET, sin_port=htons(51696), sin_addr=inet_addr("192.168.113.4")}, [16]) = 33 fcntl(10, F_SETFL, O_RDWR) = 0 rt_sigaction(SIGCHLD, {SIG_DFL, [CHLD], SA_RESTORER|SA_RESTART, 0x7f9ce7ca34f0}, {SIG_DFL, [CHLD], SA_RESTORER|SA_RESTART, 0x7f9ce7ca34f0}, ) = 0 getpeername(33, {sa_family=AF_INET, sin_port=htons(51696), sin_addr=inet_addr("192.168.113.4")}, [16]) = 0 getsockname(33, {sa_family=AF_INET, sin_port=htons(3306), sin_addr=inet_addr("192.168.100.190")}, [16]) = 0 open("/etc/hosts.allow", O_RDONLY) = 64 fstat(64, {st_mode=S_IFREG|0644, st_size=580, ...}) = 0 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f9ce9839000 read(64, "# /etc/hosts.allow: list of host"..., 4096) = 580 read(64, "", 4096) = 0 close(64) = 0 munmap(0x7f9ce9839000, 4096) = 0 open("/etc/hosts.deny", O_RDONLY) = 64 fstat(64, {st_mode=S_IFREG|0644, st_size=880, ...}) = 0 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f9ce9839000 read(64, "# /etc/hosts.deny: list of hosts"..., 4096) = 880 read(64, "", 4096) = 0 close(64) = 0 munmap(0x7f9ce9839000, 4096) = 0 getsockname(33, {sa_family=AF_INET, sin_port=htons(3306), sin_addr=inet_addr("192.168.100.190")}, [16]) = 0 fcntl(33, F_SETFL, O_RDONLY) = 0 fcntl(33, F_GETFL) = 0x2 (flags O_RDWR) setsockopt(33, SOL_SOCKET, SO_RCVTIMEO, "\36\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0", 16) = 0 setsockopt(33, SOL_SOCKET, SO_SNDTIMEO, "<\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0", 16) = 0 fcntl(33, F_SETFL, O_RDWR|O_NONBLOCK) = 0 setsockopt(33, SOL_IP, IP_TOS, [8], 4) = 0 setsockopt(33, SOL_TCP, TCP_NODELAY, [1], 4) = 0 futex(0x7f9cea5c9564, FUTEX_WAKE_OP_PRIVATE, 1, 1, 0x7f9cea5c9560, {FUTEX_OP_SET, 0, FUTEX_OP_CMP_GT, 1}) = 1 futex(0x7f9cea5c6fe0, FUTEX_WAKE_PRIVATE, 1) = 1 poll([{fd=10, events=POLLIN}, {fd=12, events=POLLIN}], 2, -1) = 1 ([{fd=10, revents=POLLIN}]) fcntl(10, F_GETFL) = 0x2 (flags O_RDWR) fcntl(10, F_SETFL, O_RDWR|O_NONBLOCK) = 0 accept(10, {sa_family=AF_INET, sin_port=htons(51697), sin_addr=inet_addr("192.168.113.4")}, [16]) = 31 fcntl(10, F_SETFL, O_RDWR) = 0 rt_sigaction(SIGCHLD, {SIG_DFL, [CHLD], SA_RESTORER|SA_RESTART, 0x7f9ce7ca34f0}, {SIG_DFL, [CHLD], SA_RESTORER|SA_RESTART, 0x7f9ce7ca34f0}, ) = 0 getpeername(31, {sa_family=AF_INET, sin_port=htons(51697), sin_addr=inet_addr("192.168.113.4")}, [16]) = 0 getsockname(31, {sa_family=AF_INET, sin_port=htons(3306), sin_addr=inet_addr("192.168.100.190")}, [16]) = 0 open("/etc/hosts.allow", O_RDONLY) = 33 fstat(33, {st_mode=S_IFREG|0644, st_size=580, ...}) = 0 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f9ce9839000 read(33, "# /etc/hosts.allow: list of host"..., 4096) = 580 read(33, "", 4096) = 0 close(33) = 0 munmap(0x7f9ce9839000, 4096) = 0 open("/etc/hosts.deny", O_RDONLY) = 33 fstat(33, {st_mode=S_IFREG|0644, st_size=880, ...}) = 0 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f9ce9839000 read(33, "# /etc/hosts.deny: list of hosts"..., 4096) = 880 read(33, "", 4096) = 0 close(33) = 0 munmap(0x7f9ce9839000, 4096) = 0 getsockname(31, {sa_family=AF_INET, sin_port=htons(3306), sin_addr=inet_addr("192.168.100.190")}, [16]) = 0 fcntl(31, F_SETFL, O_RDONLY) = 0 fcntl(31, F_GETFL) = 0x2 (flags O_RDWR) setsockopt(31, SOL_SOCKET, SO_RCVTIMEO, "\36\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0", 16) = 0 setsockopt(31, SOL_SOCKET, SO_SNDTIMEO, "<\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0", 16) = 0 fcntl(31, F_SETFL, O_RDWR|O_NONBLOCK) = 0 setsockopt(31, SOL_IP, IP_TOS, [8], 4) = 0 setsockopt(31, SOL_TCP, TCP_NODELAY, [1], 4) = 0 futex(0x7f9cea5c9564, FUTEX_WAKE_OP_PRIVATE, 1, 1, 0x7f9cea5c9560, {FUTEX_OP_SET, 0, FUTEX_OP_CMP_GT, 1}) = 1 futex(0x7f9cea5c6fe0, FUTEX_WAKE_PRIVATE, 1) = 1 poll([{fd=10, events=POLLIN}, {fd=12, events=POLLIN}], 2, -1^C <unfinished ...> Process 23512 detached This output repeats itself until the answer gets send. It could take up to 15 Minutes until the request gets served. In the local LAN its a matter of Milliseconds. Why is this and how can I debug this further? [Edit] tcpdump shows a ton of this: 14:49:44.103107 IP cassandra-test.mysql > 192.168.X.6.64626: Flags [S.], seq 1434117703, ack 1793610733, win 14600, options [mss 1460,nop,nop,sackOK,nop,wscale 7], length 0 14:49:44.135187 IP 192.168.X.6.64625 > cassandra-test.mysql: Flags [P.], seq 106:145, ack 182, win 4345, length 39 14:49:44.135293 IP cassandra-test.mysql > 192.168.X.6.64625: Flags [P.], seq 182:293, ack 145, win 115, length 111 14:49:44.167025 IP 192.168.X.6.64624 > cassandra-test.mysql: Flags [.], ack 444, win 4280, length 0 14:49:44.168933 IP 192.168.X.6.64626 > cassandra-test.mysql: Flags [.], ack 1, win 4390, length 0 14:49:44.169088 IP cassandra-test.mysql > 192.168.X.6.64626: Flags [P.], seq 1:89, ack 1, win 115, length 88 14:49:44.169672 IP 192.168.X.6.64625 > cassandra-test.mysql: Flags [P.], seq 145:171, ack 293, win 4317, length 26 14:49:44.169726 IP cassandra-test.mysql > 192.168.X.6.64625: Flags [P.], seq 293:419, ack 171, win 115, length 126 14:49:44.275111 IP 192.168.X.6.64626 > cassandra-test.mysql: Flags [P.], seq 1:74, ack 89, win 4368, length 73 14:49:44.275131 IP cassandra-test.mysql > 192.168.X.6.64626: Flags [.], ack 74, win 115, length 0 14:49:44.275149 IP 192.168.X.6.64625 > cassandra-test.mysql: Flags [P.], seq 171:180, ack 419, win 4286, length 9 14:49:44.275189 IP cassandra-test.mysql > 192.168.X.6.64626: Flags [P.], seq 89:100, ack 74, win 115, length 11 14:49:44.275264 IP 192.168.X.6.64625 > cassandra-test.mysql: Flags [P.], seq 180:185, ack 419, win 4286, length 5 14:49:44.275281 IP cassandra-test.mysql > 192.168.X.6.64625: Flags [.], ack 185, win 115, length 0 14:49:44.275295 IP cassandra-test.mysql > 192.168.X.6.64625: Flags [F.], seq 419, ack 185, win 115, length 0 14:49:44.275650 IP 192.168.X.6.64625 > cassandra-test.mysql: Flags [F.], seq 185, ack 419, win 4286, length 0 14:49:44.275660 IP cassandra-test.mysql > 192.168.X.6.64625: Flags [.], ack 186, win 115, length 0 14:49:44.275910 IP 192.168.X.6.64627 > cassandra-test.mysql: Flags [S], seq 2336421549, win 8192, options [mss 1351,nop,wscale 2,nop,nop,sackOK], length 0 14:49:44.275921 IP cassandra-test.mysql > 192.168.X.6.64627: Flags [S.], seq 3289359778, ack 2336421550, win 14600, options [mss 1460,nop,nop,sackOK,nop,wscale 7], length 0

  Read the article

• Windows using the DNS suffix search list on all lookups, even valid FQDNs. How to stop this?

  - by RealityGone

  When doing DNS lookups (specifically using nslookup, for some reason most things are not effected) Windows XP Pro SP3 is using the DNS suffix search list for every single one. Even for fully qualified domain names. For example I lookup "www.microsoft.com" but windows actually asks for "www.microsoft.com.eondream.com" (eondream.com is my primary domain). Now I can fix the issue by removing the Primary DNS suffix, but it seems to me that the DNS suffix search list should be for short, invalid names (where dots=0 or something). I'm sure I have a misconfiguration somewhere in windows but I don't know where. I've changed every option I can think of or find. Below is the output of ipconfig /all and nslookup (with debug & db2 enabled). This is using a static IP & (internal) DNS server. C:\ipconfig /all Windows IP Configuration Host Name . . . . . . . . . . . . : frayedlogic Primary Dns Suffix . . . . . . . : eondream.com Node Type . . . . . . . . . . . . : Unknown IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : eondream.com Ethernet adapter Wireless Network Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Dell Wireless 1390 WLAN Mini-Card Physical Address. . . . . . . . . : 00-1B-FC-29-EB-6B Dhcp Enabled. . . . . . . . . . . : No IP Address. . . . . . . . . . . . : 192.168.13.32 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.13.13 DNS Servers . . . . . . . . . . . : 192.168.19.19 C:\nslookup Default Server: shardik.eondream.com Address: 192.168.19.19 set debug set db2 www.microsoft.com Server: shardik.eondream.com Address: 192.168.19.19 ------------ Got answer: HEADER: opcode = QUERY, id = 2, rcode = NOERROR header flags: response, want recursion, recursion avail. questions = 1, answers = 1, authority records = 0, additional = 0 QUESTIONS: www.microsoft.com.eondream.com, type = A, class = IN ANSWERS: - www.microsoft.com.eondream.com internet address = 208.69.36.132 ttl = 0 (0 secs) ------------ Non-authoritative answer: Name: www.microsoft.com.eondream.com Address: 208.69.36.132 (Note: it resolves to that IP because I use the opendns service and that is their suggestion page or whatever you want to call it) If I am reading the nslookup output correctly then it is not a problem with my DNS server because windows is actually asking for the incorrect domain.

  Read the article

• Managed c++ std::string not accessible in unmanaged c++

  - by Radhesham

  In unmanaged c++ dll i have a function which takes constant std::string as argument Prototype : void read ( const std::string &amp;imageSpec_ ) I call this function from managed c++ dll by passing a std::string. When i debug the unmanaged c++ code the parameter imageSpec_ shows the value correctly but does not allow me to copy that value in other variable. imageSpec_.copy( sFilename, 4052 ); It shows length of imageSpec_ as 0(zero). If i try copying like std::string sTempFileName(imageSpec_); this statement string new string is a empty string. But for std::string sTempFileName(imageSpec_.c_str()); this statement string gets copied correctly. i.e. with charpointer string is copied correctly. Copying this way will need a major change in unmanaged c++ code. I am building unmanaged code in Visual studio 6.0 and managed c++ in Visual studio 2008. Is there any specific setting or code change in managed c++ that will solve the issue?

  Read the article

• Pass a JSON array to a WCF web service

  - by Tawani

  I am trying to pass a JSON array to a WCF service. But it doesn't seem to work. I actually pulled an array [GetStudents] out the service and sent the exact same array back to the service [SaveStudents] and nothing (empty array) was received. The JSON array is of the format: [ {"Name":"John","Age":12}, {"Name":"Jane","Age":11}, {"Name":"Bill","Age":12} ] And the contracts are of the following format: //Contracts [DataContract] public class Student{ [DataMember]public string Name { get; set; } [DataMember]public int Age{ get; set; } } [CollectionDataContract(Namespace = "")] public class Students : List<Student> { [DataMember]public Endorsements() { } [DataMember]public Endorsements(IEnumerable<Student> source) : base(source) { } } //Operations public Students GetStudents() { var result = new Students(); result.Add(new Student(){Name="John",12}); result.Add(new Student(){Name="Jane",11}); result.Add(new Student(){Name="Bill",12}); return result; } //Operations public void SaveStudents(Students list) { Console.WriteLine(list.Count); //It always returns zero } It there a particular way to send an array to a WCF REST service?

  Read the article

• How to mock an SqlDataReader using Moq - Update

  - by Simon G

  Hi, I'm new to moq and setting up mocks so i could do with a little help. Title says it all really - how do I mock up an SqlDataReader using Moq? Thanks Update After further testing this is what I have so far: private IDataReader MockIDataReader() { var moq = new Mock<IDataReader>(); moq.Setup( x => x.Read() ).Returns( true ); moq.Setup( x => x.Read() ).Returns( false ); moq.SetupGet<object>( x => x["Char"] ).Returns( 'C' ); return moq.Object; } private class TestData { public char ValidChar { get; set; } } private TestData GetTestData() { var testData = new TestData(); using ( var reader = MockIDataReader() ) { while ( reader.Read() ) { testData = new TestData { ValidChar = reader.GetChar( "Char" ).Value }; } } return testData; } The issue you is when I do reader.Read in my GetTestData() method its always empty. I need to know how to do something like reader.Stub( x => x.Read() ).Repeat.Once().Return( true ) as per the rhino mock example: http://stackoverflow.com/questions/1792984/mocking-a-datareader-and-getting-a-rhino-mocks-exceptions-expectationviolationexc

  Read the article

• Running MSBuild fails to read SDKToolsPath

  - by Scott Mayfield

  Howdy, I'm having a bit of an issue runnning a NAnt script that used to properly build my .Net 2.0 based website, when compiling with VS2008 and it's associated tools. I've recently upgraded all the project/solution files to VS2010, and now my build fails with the following error: [exec] C:\Windows\Microsoft.NET\Framework64\v4.0.30319\Microsoft.Common.targets(2249,9): error MSB3086: Task could not find "sgen.exe" using the S dkToolsPath "" or the registry key "HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft SDKs\Windows\v7.0A". Make sure the SdkToolsPath is set and the tool exists in the correct processor specific location under the SdkToolsPath and that the Microsoft Windows SDK is installed Now, I DO have prior versions (.Net 3.5) of the Windows SDK installed on the build server, and the full .Net 4.0 framework is installed, but I've not run across a .Net 4.0 specific version of the Windows SDK. After a bit of experimentation and research, I finally just setup a new environmental variable "SDKToolsPath" and pointed it to the copy of sgen.exe in my windows 6.0 sdk folder. This generated the same error, but it got me to notice that even though the SDKToolsPath environmental variable IS set (confirmed that I can "echo" it at the command line and it has the expected value), the error message seems to indicated that it's not being read (note the empty quotes). Most of the information I've found is .Net 3.5 (or earlier) specific. Not much 4.0 related out there yet. Searching for error code MSB3086 generated nothing useful either. Any idea what this might be? Scott

  Read the article

• Why am I getting "ArgumentError: wrong number of arguments (1 for 0)" when running my rails function

  - by Hisham

  I'm stumped on what's causing this. I get this error and stack trace in all my functional tests where I call 'post'. Here is the full stack trace: 7) Error: test_should_validate(UsersControllerTest): ArgumentError: wrong number of arguments (1 for 0) /Users/hisham/src/rails/ftuBackend/vendor/rails/actionpack/lib/action_controller/routing/route.rb:48:in `to_query' /Users/hisham/src/rails/ftuBackend/vendor/rails/actionpack/lib/action_controller/routing/route.rb:48:in `build_query_string' /Users/hisham/src/rails/ftuBackend/vendor/rails/actionpack/lib/action_controller/routing/route.rb:46:in `each' /Users/hisham/src/rails/ftuBackend/vendor/rails/actionpack/lib/action_controller/routing/route.rb:46:in `build_query_string' /Users/hisham/src/rails/ftuBackend/vendor/rails/actionpack/lib/action_controller/routing/route.rb:233:in `append_query_string' generated code (/Users/hisham/src/rails/ftuBackend/vendor/rails/actionpack/lib/action_controller/routing/route.rb:154):3:in `generate' /Users/hisham/src/rails/ftuBackend/vendor/rails/actionpack/lib/action_controller/routing/route_set.rb:365:in `__send__' /Users/hisham/src/rails/ftuBackend/vendor/rails/actionpack/lib/action_controller/routing/route_set.rb:365:in `generate' /Users/hisham/src/rails/ftuBackend/vendor/rails/actionpack/lib/action_controller/routing/route_set.rb:364:in `each' /Users/hisham/src/rails/ftuBackend/vendor/rails/actionpack/lib/action_controller/routing/route_set.rb:364:in `generate' /Users/hisham/src/rails/ftuBackend/vendor/rails/actionpack/lib/action_controller/url_rewriter.rb:208:in `rewrite_path' /Users/hisham/src/rails/ftuBackend/vendor/rails/actionpack/lib/action_controller/url_rewriter.rb:187:in `rewrite_url' /Users/hisham/src/rails/ftuBackend/vendor/rails/actionpack/lib/action_controller/url_rewriter.rb:165:in `rewrite' /Users/hisham/src/rails/ftuBackend/vendor/rails/actionpack/lib/action_controller/test_process.rb:450:in `build_request_uri' /Users/hisham/src/rails/ftuBackend/vendor/rails/actionpack/lib/action_controller/test_process.rb:406:in `process' /Users/hisham/src/rails/ftuBackend/vendor/rails/actionpack/lib/action_controller/test_process.rb:376:in `post' functional/users_controller_test.rb:57:in `test_should_validate' /Users/hisham/src/rails/ftuBackend/vendor/rails/activesupport/lib/active_support/testing/setup_and_teardown.rb:60:in `__send__' /Users/hisham/src/rails/ftuBackend/vendor/rails/activesupport/lib/active_support/testing/setup_and_teardown.rb:60:in `run' This is the test I'm running: def test_should_validate post :validate, :user => { :email => '[email protected]', :password => 'quire', :password_confirmation => 'quire', :agreed_to_terms => "true" } assert assigns(:user).errors.empty? assert_response :success end

  Read the article

• ASP.NET MVC returning ContentResult using Ajax form - how to preserve whitespace?

  - by Ben

  In my application users can enter commands that are executed on the server. The results are added to a session object. I then stuff the session object into ViewData and add it to a textarea. When done with a standard HTML form whitespace is preserved. However, when I swap this out for an ajax form (Ajax.BeginForm) and return the result as ContentResult, the whitespace is removed. Controller Action: [HttpPost] public ActionResult Execute(string submitButton, string command) { if (submitButton == "Clear") { this.CurrentConsole = string.Empty; } if (submitButton == "Execute" && !string.IsNullOrEmpty(command)) { var script = new PSScript() { Name = "Ad hoc script", CommandText = command }; this.CurrentConsole += _scriptService.ExecuteScript(script); } if (Request.IsAjaxRequest()) { return Content(this.CurrentConsole, "text/plain"); } return RedirectToAction("Index"); } View: <fieldset> <legend>Shell</legend> <%=Html.TextArea("console", ViewData["console"].ToString(), new {@class = "console", @readonly = "readonly"})%> <% using (Ajax.BeginForm("Execute", new AjaxOptions { UpdateTargetId = "console", OnBegin = "console_begin", OnComplete = "console_complete"})) { %> <input type="text" id="command" name="command" class="commandtext" /> <input type="submit" value="Execute" class="runbutton" name="submitButton" /> <input type="submit" value="Clear" class="runbutton" name="submitButton" /> <%} %> </fieldset> How can I ensure that whitespace is preserved? When I inspect the response in FireBug it looks like the whitespace is transmitted, so can only assume it has something to do with the way in which the javascript handles the response data.

  Read the article

< Previous Page | 818 819 820 821 822 823 824 825 826 827 828 829  | Next Page >