Search Results

Search found 4453 results on 179 pages for 'kernel parametes'.

Page 83/179 | < Previous Page | 79 80 81 82 83 84 85 86 87 88 89 90  | Next Page >

  • Grub options are not visible on booting on Samsung ATIV Book 9 Lite running Ubuntu 14.04

    - by mjwittering
    I've managed to install Ubuntu 14.04 on my new Samsung ATIV Book 9 Lite ultrabook. After updating some configuratiosn in the UEFI installation was very easy. The only questions and issue I believe I'm still experience is when booting. I believe when the laptop would be displaying the grub boot options I see the following. There is a black screen with a purple border of 10px around the screen. I'd like to know how I can update my system so that I see the grub boot manager. I've run these commands: sudo cat /etc/default/grub # If you change this file, run 'update-grub' afterwards to update # /boot/grub/grub.cfg. # For full documentation of the options in this file, see: # info -f grub -n 'Simple configuration' GRUB_DEFAULT=0 GRUB_HIDDEN_TIMEOUT=0 GRUB_HIDDEN_TIMEOUT_QUIET=true GRUB_TIMEOUT=10 GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian` GRUB_CMDLINE_LINUX_DEFAULT="quiet splash" GRUB_CMDLINE_LINUX="" # Uncomment to enable BadRAM filtering, modify to suit your needs # This works with Linux (no patch required) and with any kernel that obtains # the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...) #GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef" # Uncomment to disable graphical terminal (grub-pc only) #GRUB_TERMINAL=console # The resolution used on graphical terminal # note that you can use only modes which your graphic card supports via VBE # you can see them in real GRUB with the command `vbeinfo' #GRUB_GFXMODE=640x480 # Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux #GRUB_DISABLE_LINUX_UUID=true # Uncomment to disable generation of recovery mode menu entries #GRUB_DISABLE_RECOVERY="true" # Uncomment to get a beep at grub start #GRUB_INIT_TUNE="480 440 1" The command was not possible, sudo efibootmgr.

    Read the article

  • Free Updates and Errata for Oracle Linux

    - by Lenz Grimmer
    ISO images of the Oracle Linux installation media as well as individual binary RPMs (and the sources) of major and minor releases (Updates) have always been freely available for download, use and distribution, ever since we started the Oracle Linux support program. We're now taking this a step further: in addition to the above, we will now also provide updated packages or errata for free from separate yum repositories on http://public-yum.oracle.com. If you would like to keep your Oracle Linux system up to date, you can now do so by subscribing your system to the respective "_latest" repository for your distribution, e.g. "ol6_latest" for Oracle Linux 6. See the installation instructions on the public yum front page for details on how enable these repositories. If you would like to also receive free updates to the Unbreakable Enterprise Kernel Release 2, make sure to enable the "[ol6_UEK_latest]" repository as well - updates to the kernel will be made available from this separate channel until it is included in the next set of installation media. Now what does this mean for Oracle Network Support? Getting access to the updates and errata was just one part of the offering – the following benefits will still only be available with an Oracle Linux Support Subscription only: Full indemnification against intellectual property claims. Use of base functionality in Enterprise Manager 12c for Linux and Enterprise Manager OpsCenter for provisioning, patching, management and monitoring of Oracle Linux Access to additional software channels on the Unbreakable Linux Network (ULN) (e.g. DTrace beta releases or ASM support packages) Wim also published a blog post with his take on the announcement.

    Read the article

  • Running 64 bit Ubuntu distribution from 32 bit Ubuntu

    - by csg
    Related to this question How do I run qemu with 64bit processor on a 64bit machine?, I'm trying to run latest ubuntu 11.10 64bit distribution under Ubuntu 11.04 32 bit using qemu on a core2duo (64 bit cpu) machine, using following qemu parameters with no success. Error under qemu: "This kernel required an x86-64 CPU, but only detected an i686 CPU. Unable to boot - please use a kernel appropiate for your CPU" Isn't qemu suppose to emulate a 64 bit machine? I think I'm missing something, but I can't figure it out. qemu -cpu (kvm64|core2duo|qemu64) -boot d -cdrom ubuntu-11.10-desktop-amd64.iso qemu-system-x86_64 -boot d -cdrom ubuntu-11.10-desktop-amd64.iso Here is my uname -m i686 Here is my /proc/cpuinfo processor : 1 vendor_id : GenuineIntel cpu family : 6 model : 23 model name : Intel(R) Core(TM)2 Duo CPU P8400 @ 2.26GHz stepping : 6 cpu MHz : 800.000 cache size : 3072 KB physical id : 0 siblings : 2 core id : 1 cpu cores : 2 apicid : 1 initial apicid : 1 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 10 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc arch_perfmon pebs bts aperfmperf pni dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm sse4_1 lahf_lm dts tpr_shadow vnmi flexpriority bogomips : 4522.45 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management:

    Read the article

  • MySQL 5.5 Available on Oracle Linux 6 and RHEL 6

    - by Bertrand Matthelié
    @font-face { font-family: "Arial"; }@font-face { font-family: "Calibri"; }@font-face { font-family: "Cambria"; }@font-face { font-family: "MS Minngs"; }p.MsoNormal, li.MsoNormal, div.MsoNormal { margin: 0cm 0cm 0.0001pt; font-size: 12pt; font-family: "Times New Roman"; }a:link, span.MsoHyperlink { color: blue; text-decoration: underline; }a:visited, span.MsoHyperlinkFollowed { color: purple; text-decoration: underline; }div.Section1 { page: Section1; } Following the availability of MySQL 5.5 on Oracle Linux 6 with the Unbreakable Enterprise Kernel, MySQL 5.5 is now also available on Red Hat Enterprise Linux 6 (RHEL 6) and Oracle Linux 6 with the Red Hat compatible kernel. MySQL users can download MySQL 5.5 Community Edition binaries for Oracle Linux and Red Hat Linux 6 here. MySQL customers can rely on Oracle Premier Support for MySQL when using the MySQL database on either Oracle Linux or Red Hat Enterprise Linux 6. In addition to offering direct Linux support to customers running RHEL6, Oracle Linux 6, or a combination of both, Oracle also provides Oracle Linux 6 binaries, update and erratas for free via http://public-yum.oracle.com.

    Read the article

  • Wifi range issues and intermittent dropouts, Thinkpad Edge

    - by jimbo
    If I am more than a couple of metres from my access point (and I'm seeing this across various APs) with my newish Thinkpad Edge 15, running 10.10, the wifi performance becomes ... flaky. When this is happening, I see the following in dmesg, although I'm not sure if it's related: [ 2497.011099] intel ips 0000:00:1f.6: CPU power or thermal limit exceeded [ 2502.012711] intel ips 0000:00:1f.6: CPU power or thermal limit exceeded [ 2507.009254] intel ips 0000:00:1f.6: CPU power or thermal limit exceeded [ 2512.008367] intel ips 0000:00:1f.6: CPU power or thermal limit exceeded [ 2517.007467] intel ips 0000:00:1f.6: CPU power or thermal limit exceeded [ 2522.006558] intel ips 0000:00:1f.6: CPU power or thermal limit exceeded [ 2527.008157] intel ips 0000:00:1f.6: CPU power or thermal limit exceeded [ 2532.007251] intel ips 0000:00:1f.6: CPU power or thermal limit exceeded [ 2537.003838] intel ips 0000:00:1f.6: CPU power or thermal limit exceeded [ 2542.005427] intel ips 0000:00:1f.6: CPU power or thermal limit exceeded [ 2547.004496] intel ips 0000:00:1f.6: CPU power or thermal limit exceeded [ 2552.003611] intel ips 0000:00:1f.6: CPU power or thermal limit exceeded lspci -vvv has the following to say about my wireless adapter: 03:00.0 Network controller: Intel Corporation Centrino Wireless-N 1000 Subsystem: Intel Corporation Centrino Wireless-N 1000 BGN Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 49 Region 0: Memory at f0500000 (64-bit, non-prefetchable) [size=8K] Capabilities: <access denied> Kernel driver in use: iwlagn Kernel modules: iwlagn If I get within a couple of metres of the access point, I still see that output in dmesg, but the connection stabilises. My question is threefold: how do I get better wifi range, what can/should I do about those messages in dmesg, and most crucially, are the two related? As ever let me know if there's other information that would help! Edit: I am using this machine in exactly the same locations I used my previous Thinkpad (T61) running various older versions of Ubuntu, so I definitely feel there is something wrong, rather me having unreasonable expectations of range!

    Read the article

  • Disk space suddenly 100% used?

    - by dannymcc
    I'm trying to identify why, suddenly, 100% of our disk space is in use. I have already rebooted but the issue persists. Here are the outputs of some commands that are showing some strange (for me) results: danny@hydrogen:~$ df -h Filesystem Size Used Avail Use% Mounted on /dev/cciss/c0d0p1 130G 122G 949M 100% / none 1.9G 196K 1.9G 1% /dev none 2.0G 0 2.0G 0% /dev/shm none 2.0G 40K 2.0G 1% /var/run none 2.0G 0 2.0G 0% /var/lock none 2.0G 0 2.0G 0% /lib/init/rw danny@hydrogen:/$ sudo du -chs / du: cannot access `/proc/1662/task/1662/fd/4': No such file or directory du: cannot access `/proc/1662/task/1662/fdinfo/4': No such file or directory du: cannot access `/proc/1662/fd/4': No such file or directory du: cannot access `/proc/1662/fdinfo/4': No such file or directory danny@hydrogen:/$ df Filesystem 1K-blocks Used Available Use% Mounted on /dev/cciss/c0d0p1 135342296 128144108 323104 100% / none 1991336 196 1991140 1% /dev none 1995788 0 1995788 0% /dev/shm none 1995788 40 1995748 1% /var/run none 1995788 0 1995788 0% /var/lock none 1995788 0 1995788 0% /lib/init/rw danny@hydrogen:/$ mount /dev/cciss/c0d0p1 on / type ext4 (rw,errors=remount-ro) proc on /proc type proc (rw,noexec,nosuid,nodev) none on /sys type sysfs (rw,noexec,nosuid,nodev) none on /sys/fs/fuse/connections type fusectl (rw) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) none on /dev type devtmpfs (rw,mode=0755) none on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) none on /dev/shm type tmpfs (rw,nosuid,nodev) none on /var/run type tmpfs (rw,nosuid,mode=0755) none on /var/lock type tmpfs (rw,noexec,nosuid,nodev) none on /lib/init/rw type tmpfs (rw,nosuid,mode=0755) danny@hydrogen:/$ sudo du -h --max-depth=1 634M ./premvet_sync 5.6M ./etc 4.0K ./opt 16K ./lost+found 7.4M ./bin 623M ./lib 196K ./dev 0 ./sys 4.0K ./srv 4.0K ./cdrom 8.0K ./media 52K ./tmp ... it hangs for ages here..... The server is running Ubuntu 10.04.4 LTS. System load: 2.85 Temperature: 8 C Usage of /: 94.7% of 129.07GB Processes: 132 Memory usage: 39% Users logged in: 0 Swap usage: 0% IP address for eth0: 192.168.1.124 => / is using 94.7% of 129.07GB I'm struggling to comprehend why this is happening! Any pointers would be appreciated.

    Read the article

  • Performance Overhead of Encrypted /home

    - by SabreWolfy
    I have a netbook with Windows on the second partition and Xubuntu (/ and /home) on the third partition. I selected to encrypt my home folder during installation. The performance of the netbook is adequate for the small machine that it is, but I'm looking to improve performance. I could not find much information about the overhead (CPU or drive) associated with home partition encryption. I ran the following, writing to my home partition as well as the the mounted Windows partition: dd if=/dev/zero of=~/dummy bs=512 count=10240 dd if=/dev/zero of=/media/Windows/dummy bs=512 count=10240 The first returned 2.4MB/s and the second returned 2.5MB/s. Can I therefore deduce that there is very little overhead to home folder encryption? I'm not sure if the different filesystems will make any difference (/ and /home are ext3). Update 1 I don't know why I didn't use /tmp instead of the mounted Windows folder. Only /home is encrypted, so /tmp is unencrypted ext3. The results of the dd as above are astounding: ~: 2.4 MB/s /tmp: 42.6 MB/s Comments please? The reason I am asking this is that disk access on the netbook is noticeably slow. Update 2 I timed each of the dd operations with time: ~: real 0m2.217s user 0m0.028s sys 0m2.176s /tmp: real 0m0.152s user 0m0.012s sys 0m0.136s See also: discussion on UbuntuForums.org and bug report Edit: Output of mount: /dev/sda3 on / type ext3 (rw,noatime,errors=remount-ro,user_xattr,commit=600) proc on /proc type proc (rw,noexec,nosuid,nodev) none on /sys type sysfs (rw,noexec,nosuid,nodev) fusectl on /sys/fs/fuse/connections type fusectl (rw) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) none on /dev type devtmpfs (rw,mode=0755) none on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) none on /dev/shm type tmpfs (rw,nosuid,nodev) none on /var/run type tmpfs (rw,nosuid,mode=0755) none on /var/lock type tmpfs (rw,noexec,nosuid,nodev) binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev) gvfs-fuse-daemon on /home/USER/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=USER) `

    Read the article

  • Audio not working

    - by user3215
    Anybody could help me in troubleshooting audio problem on ubutnu 9.04 desktop edition?. For some reason I've to keep this os not upgraded and I'm trying to fix the audio problem on this for months. It works well on upgraded version(9.10,10.04) but not on jaunty. aplay -l: **** List of PLAYBACK Hardware Devices **** card 0: Intel [HDA Intel], device 0: ALC883 Analog [ALC883 Analog] Subdevices: 0/1 Subdevice #0: subdevice #0 card 0: Intel [HDA Intel], device 1: ALC883 Digital [ALC883 Digital] Subdevices: 1/1 Subdevice #0: subdevice #0 lsmod | grep snd: snd_hda_intel 436148 7 snd_pcm_oss 46336 0 snd_mixer_oss 22656 1 snd_pcm_oss snd_pcm 83076 4 snd_hda_intel,snd_pcm_oss snd_seq_dummy 10756 0 snd_seq_oss 37760 0 snd_seq_midi 14336 0 snd_rawmidi 29696 1 snd_seq_midi snd_seq_midi_event 15104 2 snd_seq_oss,snd_seq_midi snd_seq 56880 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event snd_timer 29704 2 snd_pcm,snd_seq snd_seq_device 14988 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq snd 62756 21 snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device soundcore 15200 1 snd snd_page_alloc 16904 2 snd_hda_intel,snd_pcm cat /proc/asound/cards: 0 [Intel ]: HDA-Intel - HDA Intel HDA Intel at 0xe1280000 irq 16 cat /proc/asound/version: Advanced Linux Sound Architecture Driver Version 1.0.18rc3. vim /etc/modules: # /etc/modules: kernel modules to load at boot time. # # This file contains the names of kernel modules that should be loaded # at boot time, one per line. Lines beginning with "#" are ignored. lp Audio Settings:

    Read the article

  • Host is unreacheble with static networking configuration via /etc/network/interfaces while GUI NetworkManager is ok

    - by Riccardo
    I have some trouble setting-up the network interface using the static IP configuration. I run ubuntu 12.04 kernel 3.11.0-22 with the back-ports enabled. I followed these instructions from help.ubuntu.com but there seems to exist some conflict between the GUI approach (NetworkManager) and the command line approach. $ sudo nano /etc/network/interfaces auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 10.1.1.50 gateway 10.1.1.10 netmask 255.255.255.0 dns-nameservers 192.168.3.45 192.168.8.10 $ sudo /etc/init.d/networking restart I than try to ping for example google.com ping -c 3 www.google.com the response is that the host is unreachable. The icon on the top right of the desktop says: wired network disconnected. If I work using the GUI approach (Edit Connections and so on...) all works great. Can same one explain to me where I wrong? $ ifconfig eth0 eth0 Link encap:Ethernet HWaddr 90:e6:ba:07:4a:77 inet addr:10.1.1.50 Bcast:10.1.1.255 Mask:255.255.255.0 inet6 addr: fe80::92e6:baff:fe07:4a77/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:39619 errors:0 dropped:0 overruns:0 frame:0 TX packets:18520 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:19030895 (19.0 MB) TX bytes:2768769 (2.7 MB) $ netstat -rn Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 10.1.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0

    Read the article

  • Swap, Swapiness and Standby: swapping starts when waking up

    - by mdo
    I'm running running Ubuntu 12.04 on a Lenovo W500 (Core2Duo T9400, 4GB Ram) Current kernel: 3.2.0-32-generic #51-Ubuntu SMP Wed Sep 26 21:33:09 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux -- but the problems exists since a couple of months, surviving quite a few software (includig kernel) updates I regularly put my machine into suspend-to-ram (S3) and when the machine comes back up Ubuntu starts to swap out processes. I was able to observe that the used swap-space starts to grow right after the box returns. See munin graphs below, the gap (obviously) shows the timeframe in STR. Needless to say that the box becomes unusable while swapping, load goes up beyond 10. What I've done so far: lowered swappiness from default (60) to 10 (via /etc/sysctl.conf: vm.swappiness=10) -- this has improved the situation much, but sometimes the problem comes back, I have not found a trigger (like memory usage) for this for now lowered swappiness to 5 -- perhaps this has brought an improvement again Before going to STR the box ran stable without (swapping) problems for hours. Today when the issue showed up again I used this script (- http://stackoverflow.com/questions/479953/how-to-find-out-which-processes-are-swapping-in-linux) to find what processes have the most used swap space. The result after the swap orgy is like that (all PIDs with more than 10M usage): Overall swap used: 2121344 kB ======================================== kB pid name ======================================== 439520 17491 java 208148 22719 firefox 136640 4337 /usr/bin/quodli 120852 5271 chrome 81832 5264 chrome 74284 17003 chrome 65368 16960 chrome 57088 3675 chrome 56184 30923 chrome 54412 11331 chrome 54264 3878 chrome 51508 18382 chrome 50088 3163 zeitgeist-fts 49772 15543 chrome 41344 15355 compiz 35040 1161 mysqld 32124 18374 chrome 30940 11339 chrome 30044 5752 chrome 28780 4235 plugin-containe 24576 31246 empathy-chat 23840 17703 chrome 22512 3207 ubuntuone-syncd 21588 1937 ntop 18336 2021 asterisk 17200 3915 chrome 13964 1935 Xorg 12036 10679 chrome 11104 30782 empathy 11056 2889 python 10932 16565 knotify4 The java instance at the top is IntelliJ. IntelliJ, Firefox and Chrome also were all used right before the box was put to STR. So my question is: can I somehow prevent these swapouts AND why do they happen? Is it perhaps related to some misidentification of idle processes? I'm not looking for resolutions like: turn off swap buy more RAM Thanks in advance!

    Read the article

  • What can I do about rsync of large files killing my laptop's wifi connection

    - by David Dean
    When I run a rsync to backup my home folder over the network like so: rsync -avhz --progress --delete /home/dbdean/ [email protected]:/home/backups/david/ I seem to have problems with my quite large .VirtualBox/HardDisks/Windows XP.vdi file. Occasionally the wifi will silently fail (the transfer stops, and any other network access is broken). If I reconnect the wifi to my network before the transfer times out, it happily keeps going (and other network access is back), but I can't just leave it unattended most of the time, as I have to keep an eye on it. I'm guessing this is probably a bug in the wireless card related to a particularly high sustained volume of network usage, but I'm not really sure where to start with diagnosing this problem so that I can provide a good bug report. Or it could be something else, I guess. Any help would be appreciated. My network card is an Atheros Communications Inc. AR9285, as lspci -k shows: 43:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01) Subsystem: Hewlett-Packard Company Device 3040 Kernel driver in use: ath9k Kernel modules: ath9k

    Read the article

  • Ubuntu 12.04 - Brightness controls not working

    - by Juan Manuel Zolezzi Volpi
    Controls from "Brightness and Lock" were not working so I've tried a solution that involved changing grub, which I'm detailing below: # If you change this file, run 'update-grub' afterwards to update # /boot/grub/grub.cfg. # For full documentation of the options in this file, see: # info -f grub -n 'Simple configuration' GRUB_DEFAULT=0 #GRUB_HIDDEN_TIMEOUT=0 GRUB_HIDDEN_TIMEOUT_QUIET=true GRUB_TIMEOUT=10 GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian` GRUB_CMDLINE_LINUX="quiet splash acpi_backlight=vendor" # Uncomment to enable BadRAM filtering, modify to suit your needs # This works with Linux (no patch required) and with any kernel that obtains # the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...) #GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef" # Uncomment to disable graphical terminal (grub-pc only) #GRUB_TERMINAL=console # The resolution used on graphical terminal # note that you can use only modes which your graphic card supports via VBE # you can see them in real GRUB with the command `vbeinfo' #GRUB_GFXMODE=640x480 # Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux #GRUB_DISABLE_LINUX_UUID=true # Uncomment to disable generation of recovery mode menu entries #GRUB_DISABLE_RECOVERY="true" # Uncomment to get a beep at grub start #GRUB_INIT_TUNE="480 440 1" After doing this, the brightness control dissapeared like you can see at http://screencloud.net/img/screenshots/6b90d56604b70cc749a632d0bc005a20.png Any ideas? Would love to be able to configure Brightness or even use apps like F.lux to regulate it automatically. Edit: I've modified the following line to GRUB_CMDLINE_LINUX_DEFAULT="quiet splash acpi_osi=" and now the brightness controls are back, but whatever I change the brightness remains the same. Just in case I'm using Intel H77

    Read the article

  • Ralink RT3060 wireless device configuration on ubuntu 12.04

    - by Stephan
    concerning How do I get a Ralink RT3060 wireless card working? I'm running Ubuntu 12.04 with a 'LWPX07 Edimax EW-7711In 150M 1T1R WL PCI Card' which has a rt3060 chip. Out of the box the card is recognized as rt2800sta. I tried solution one, that didn't work. Still the card connects to the wireless network, but it seems to slow to load any pages. Then I tried solution 2, but then the network-manager doesn't see any wireless device. $ iwconfig lo no wireless extensions. ra0 Ralink STA Link Quality:0 Signal level:0 Noise level:0 Rx invalid nwid:0 invalid crypt:0 invalid misc:0 eth0 no wireless extensions. $ lsmod Module Size Used by rt3562sta 882296 0 $ lspci -v 05:02.0 Network controller: Ralink corp. RT3060 Wireless 802.11n 1T/1R Subsystem: Edimax Computer Co. Device 7711 Flags: bus master, slow devsel, latency 64, IRQ 23 Memory at ff9f0000 (32-bit, non-prefetchable) [size=64K] Capabilities: <access denied> Kernel driver in use: rt2860 Kernel modules: rt3562sta, rt2800pci Am I missing a configuration step? How do I tell the network card which driver to use? Thanks in advance Stephan I found the problem. As described in stevens blog http://steveswinsburg.wordpress.com/2011/03/12/how-to-install-a-d-link-dwa-525-wireless-network-card-in-ubuntu-10-04/ sudo su make && make install "You need to use ‘sudo su’ and not just ‘sudo’ so it creates the directories properly." That is the problem with the solution describe above.

    Read the article

  • updatedb & locate command problem - Files from external hard drive are no longer indexed after rebooting

    - by user784637
    Files from my external hard drive are no longer indexed after rebooting. I have to remount and then run # updatedb after each reboot. The problem is updatedb takes a few minutes for my external hard drives. Is there any way I can retain indexing for my externals after I reboot so that the locate command can search through my externals? EDIT: Per Request here are my specs: $ cat /etc/updatedb.conf PRUNE_BIND_MOUNTS="yes" # PRUNENAMES=".git .bzr .hg .svn" PRUNEPATHS="/tmp /var/spool /media" PRUNEFS="NFS nfs nfs4 rpc_pipefs afs binfmt_misc proc smbfs autofs iso9660 ncpfs coda devpts ftpfs devfs mfs shfs sysfs cifs lustre_lite tmpfs usbfs udf fuse.glusterfs fuse.sshfs ecryptfs fusesmb devtmpfs" # mount /dev/sda5 on / type ext4 (rw,errors=remount-ro) proc on /proc type proc (rw,noexec,nosuid,nodev) none on /sys type sysfs (rw,noexec,nosuid,nodev) none on /sys/fs/fuse/connections type fusectl (rw) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) none on /dev type devtmpfs (rw,mode=0755) none on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) none on /dev/shm type tmpfs (rw,nosuid,nodev) none on /var/run type tmpfs (rw,nosuid,mode=0755) none on /var/lock type tmpfs (rw,noexec,nosuid,nodev) none on /lib/init/rw type tmpfs (rw,nosuid,mode=0755) binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev) gvfs-fuse-daemon on /home/me/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=me) /dev/sdb1 on /media/me type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096,default_permissions) /dev/sdd1 on /media/Little Boy type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096,default_permissions) /dev/sde1 on /media/Fat Man type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096,default_permissions) # on_ac_power; echo $? 255

    Read the article

  • libc-bin errors when trying to install php

    - by jonney
    i am trying to update and install php into my ubuntu server 12.04 using the command below: apt-get upgrade php apt-get install php5-curl php5-gd php5-mysql php5-pgsql However i receive this error all the time: gzip: stdout: No space left on device E: mkinitramfs failure cpio 141 gzip 1 update-initramfs: failed for /boot/initrd.img-3.2.0-34-generic with 1. run-parts: /etc/kernel/postinst.d/initramfs-tools exited with return code 1 Failed to process /etc/kernel/postinst.d at /var/lib/dpkg/info/linux-image-3.2.0-34-generic.postinst line 1010. dpkg: error processing linux-image-3.2.0-34-generic (--configure): subprocess installed post-installation script returned error exit status 2 dpkg: dependency problems prevent configuration of linux-image-server: linux-image-server depends on linux-image-3.2.0-33-generic; however: Package linux-image-3.2.0-33-generic is not configured yet. dpkg: error processing linux-image-server (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of linux-server: linux-server depends on linux-image-server (= 3.2.0.33.36); however: Package linux-image-server is not configured yet. dpkg: error processing linux-server (--configure): dependency problems - leaving unconfigured Setting up libpq5 (9.1.10-0ubuntu12.04) ... No apport report written because the error message indicates it's a follow-up error from a previous failure. No apport report written because MaxReports has already been reached Setting up php5-curl (5.3.10-1ubuntu3.8) ... Setting up php5-pgsql (5.3.10-1ubuntu3.8) ... Processing triggers for initramfs-tools ... update-initramfs: Generating /boot/initrd.img-3.2.0-32-generic gzip: stdout: No space left on device E: mkinitramfs failure cpio 141 gzip 1 update-initramfs: failed for /boot/initrd.img-3.2.0-32-generic with 1. dpkg: error processing initramfs-tools (--configure): subprocess installed post-installation script returned error exit status 1 No apport report written because MaxReports has already been reached Processing triggers for libc-bin ... ldconfig deferred processing now taking place Errors were encountered while processing: linux-image-3.2.0-33-generic linux-image-3.2.0-34-generic linux-image-server linux-server initramfs-tools E: Sub-process /usr/bin/dpkg returned an error code (1) Not sure whats wrong and why it cant process the linux-image files?

    Read the article

  • How to rebuild fstab automatically

    - by yvoyer
    I accidentally removed all the entries from the fstab files while doing a backup (Yeah, I know ;)). I would like to know if there is a way to rebuild it with the current mount options, since I did not restart the server since the deletion. If there is no such program, could anybody help me rebuild it. Using this, I have found the command to show the current setup, but I don't know what to do with it. $ sudo blkid /dev/sda1: UUID="3fc55e0f-a9b3-4229-9e76-ca95b4825a40" TYPE="ext4" /dev/sda5: UUID="718e611d-b8a3-4f02-a0cc-b3025d8db54d" TYPE="swap" /dev/sdb1: LABEL="Files_Server_Int" UUID="02fc2eda-d9fb-47fb-9e60-5fe3073e5b55" TYPE="ext4" /dev/sdc1: UUID="41e60bc2-2c9c-4104-9649-6b513919df4a" TYPE="ext4" /dev/sdd1: LABEL="Expansion Drive" UUID="782042B920427E5E" TYPE="ntfs" $ cat /etc/mtab /dev/sda1 / ext4 rw,errors=remount-ro 0 0 proc /proc proc rw,noexec,nosuid,nodev 0 0 none /sys sysfs rw,noexec,nosuid,nodev 0 0 none /sys/fs/fuse/connections fusectl rw 0 0 none /sys/kernel/debug debugfs rw 0 0 none /sys/kernel/security securityfs rw 0 0 none /dev devtmpfs rw,mode=0755 0 0 none /dev/pts devpts rw,noexec,nosuid,gid=5,mode=0620 0 0 none /dev/shm tmpfs rw,nosuid,nodev 0 0 none /var/run tmpfs rw,nosuid,mode=0755 0 0 none /var/lock tmpfs rw,noexec,nosuid,nodev 0 0 none /lib/init/rw tmpfs rw,nosuid,mode=0755 0 0 none /var/lib/ureadahead/debugfs debugfs rw,relatime 0 0 /dev/sdc1 /home ext4 rw 0 0 /dev/sdb1 /media/Files_Server ext4 rw 0 0 binfmt_misc /proc/sys/fs/binfmt_misc binfmt_misc rw,noexec,nosuid,nodev 0 0 /dev/sdd1 /media/Expansion\040Drive fuseblk rw,nosuid,nodev,allow_other,blksize=4096,default_permissions 0 0 gvfs-fuse-daemon /home/yvoyer/.gvfs fuse.gvfs-fuse-daemon rw,nosuid,nodev,user=yvoyer 0 0 /dev/sdd1 /media/Backup500 fuseblk rw,nosuid,nodev,sync,allow_other,blksize=4096,default_permissions 0 0 /dev/sr0 /media/DIR-615 iso9660 ro,nosuid,nodev,uhelper=udisks,uid=1000,gid=1000,iocharset=utf8,mode=0400,dmode=0500 0 0 gvfs-fuse-daemon /home/cdrapeau/.gvfs fuse.gvfs-fuse-daemon rw,nosuid,nodev,user=cdrapeau 0 0

    Read the article

  • Can not access Internet (DNS names do not resolve) after update today

    - by Aras
    I have been using Precise for a few weeks now for work with no problem. Today, I am not able to access any website using either wired or wireless connections. I installed the updates today which included nautilus, xserver, and a new kernel (3.2.0-24). After restarting I no longer was able to browse the Internet using firefox or chrome. Trying to ping google in terminal gives ping: unknown host google.ca I have tried: Connecting to wireless or wired networks (both working on other machines) Restart the machine and boot with previous Kernel Manually configure opendns on my wired connection Restart the network and the laptop and the wireless card Without any success so far. I am not sure where to go next. Please let me know the cause of the issue or help me troubleshoot it. Note that the laptop does receive an ip address, and it can ping ip address of google.ca (74.125.127.94) but not the domain name, or any domain name for that matter. This system was upgraded from 11.10 to 12.04 more two weeks ago.

    Read the article

  • Exempt programs from using active VPN connection

    - by Oxwivi
    When I connect to a VPN, all my network traffic is automatically routed through it. Is there a way to add exemptions to that? I don't know if adding exceptions has anything to do with the VPN protocol, but the VPN I'm using is of the OpenVPN protocol. Speaking of OpenVPN, why is it not installed by default on Ubuntu installs unlike PPTP? I could not get the list of IRCHighWay's servers, and this is the result I get trying to connect on XChat with running the bash script running: * Looking up irc.irchighway.net * Connecting to irc.irchighway.net (65.23.153.98) port 6667... * Connected. Now logging in... * You have been K-Lined. * *** You are not welcome on this network. * *** K-Lined for Open proxies are not allowed. (2011/02/26 01.21) * *** Your IP is 173.0.14.9 * *** For assistance, please email [email protected] and include everything shown here. * Closing Link: 0.0.0.0 (Open proxies are not allowed. (2011/02/26 01.21)) * Disconnected (Remote host closed socket). The IP 173.0.14.9 is the one due to my VPN. I had forgotten to check ip route list before running the script, and this is the one after running it: ~$ ip route list 99.192.193.241 dev ppp0 proto kernel scope link src 173.0.14.9 173.0.14.2 via 192.168.1.1 dev eth1 proto static 173.0.14.2 via 192.168.1.1 dev eth1 src 192.168.1.3 192.168.1.0/24 dev eth1 proto kernel scope link src 192.168.1.3 metric 2 169.254.0.0/16 dev eth1 scope link metric 1000 default dev ppp0 proto static Oh and running the script returned this output: ~$ sudo bash irc_route.sh Usage: inet_route [-vF] del {-host|-net} Target[/prefix] [gw Gw] [metric M] [[dev] If] inet_route [-vF] add {-host|-net} Target[/prefix] [gw Gw] [metric M] [netmask N] [mss Mss] [window W] [irtt I] [mod] [dyn] [reinstate] [[dev] If] inet_route [-vF] add {-host|-net} Target[/prefix] [metric M] reject inet_route [-FC] flush NOT supported I ran the script after connecting to the VPN.

    Read the article

  • Can't Mount Phone, "according to mtab, /dev/sdb1 is already mounted on /"

    - by RPG Master
    My myTouch Slide wasn't mounting, so I decided to open Disk Utility. My phone shows up but when I click "Mount" it gives me this error: Error mounting: mount exited with exit code 1: helper failed with: mount: according to mtab, /dev/sdb1 is already mounted on / mount failed Here's my mtab: /dev/sdb1 / ext4 rw,errors=remount-ro,commit=0 0 0 proc /proc proc rw,noexec,nosuid,nodev 0 0 none /sys sysfs rw,noexec,nosuid,nodev 0 0 fusectl /sys/fs/fuse/connections fusectl rw 0 0 none /sys/kernel/debug debugfs rw 0 0 none /sys/kernel/security securityfs rw 0 0 none /dev devtmpfs rw,mode=0755 0 0 none /dev/pts devpts rw,noexec,nosuid,gid=5,mode=0620 0 0 none /dev/shm tmpfs rw,nosuid,nodev 0 0 none /var/run tmpfs rw,nosuid,mode=0755 0 0 none /var/lock tmpfs rw,noexec,nosuid,nodev 0 0 binfmt_misc /proc/sys/fs/binfmt_misc binfmt_misc rw,noexec,nosuid,nodev 0 0 gvfs-fuse-daemon /home/matthew/.gvfs fuse.gvfs-fuse-daemon rw,nosuid,nodev,user=matthew 0 0 /dev/sdg1 /media/Seagate\040GoFlex ext4 rw,nosuid,nodev,uhelper=udisks 0 0 EDIT: Here's my fstab: # /etc/fstab: static file system information. # # Use 'blkid -o value -s UUID' to print the universally unique identifier # for a device; this may be used with UUID= as a more robust way to name # devices that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 /dev/sda1 / ext4 errors=remount-ro 0 1 # swap was on /dev/sda5 during installation UUID=3b0db205-2bdb-4c98-a506-6bdd3520d540 none swap sw 0 0

    Read the article

  • Blur gets displaced compared to original image

    - by user1294203
    I have implemented a SSAO and I'm using a blur step to smooth it out. The problem is that the blurred texture is slightly displaced compared to the original. I'm blurring using a 4x4 kernel since that was my noise kernel in SSAO. The following is the blurring shader: float result = 0.0; for(int i = 0; i < 4; i++){ for(int j = 0; j < 4; j++){ vec2 offset = vec2(TEXEL_SIZE.x * i, TEXEL_SIZE.y * j); result += texture(aoSampler, TexCoord + offset).r; } } out_AO = vec4(vec3(0.0), result * 0.0625); Where TEXEL_SIZE is one over my window resolution. I was thinking that this is was an error based on how OpenGL counts the Texel center, so I tried displacing the texture coordinate I was using by 0.5 * TEXEL_SIZE, but there was still a slight displacement. The texture input to my blur shader, has wrap parameters: glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_WRAP_S, GL_CLAMP); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_WRAP_T, GL_CLAMP); When I tell the blur shader to just output the the value of the pixel, the result is not displaced, so it must have something to do with how neighboring pixels are sampled. Any thoughts?

    Read the article

  • nvidia segfault crashes XServer (12.04 fresh install)

    - by Sébastien GILLES
    I am on a fresh install of 12.04, and my video card is a Quadro FX 570, which appears to be supported (see output of unity_support_test below). But my Xserver crashes randomly and causes my session to just shutdown and bring me back to the logging screen. This happens several times per hour. After checking syslog it that a segfault in the nvidia driver is the cause of the problem: Jun 13 11:14:17 lima kernel: [86569.828982] Xorg[17940]: segfault at ffebeb69 ip b4c8f7aa sp bf8076dc error 4 in nvidia_drv.so[b47a7000+706000] Jun 13 11:14:36 lima gnome-session[18119]: Gdk-WARNING: gnome-session: Fatal IO error 11 (Ressource temporairement non disponible) on X server :3.#012 The funny thing is that as I was reporting this bug, my xserver crashed again (!) and this time I got another error message: Jun 13 11:29:39 lima kernel: [87491.106441] NVRM: Xid (0000:02:00): 6, PE0001 Jun 13 11:29:39 lima gnome-session[26493]: Gdk-WARNING: gnome-session: Fatal IO error 11 (Ressource temporairement non disponible) on X server :4.#012 Any idea as to what can be the problem given that i am on a fresh install with a supported video card ? Sébastien == Output of unity_support_test $ /usr/lib/nux/unity_support_test -p OpenGL vendor string: NVIDIA Corporation OpenGL renderer string: Quadro FX 570/PCIe/SSE2 OpenGL version string: 3.3.0 NVIDIA 295.40 Not software rendered: yes Not blacklisted: yes GLX fbconfig: yes GLX texture from pixmap: yes GL npot or rect textures: yes GL vertex program: yes GL fragment program: yes GL vertex buffer object: yes GL framebuffer object: yes GL version is 1.4+: yes Unity 3D supported: yes

    Read the article

  • UEFI Boot Failure - Hang after Printing USB Information

    - by James
    I'm experiencing a really weird boot problem. With both 12.10 and 12.04LTS, the vast majority of kernels (and initrds) that I've tried boot, but hang immediately after printing out information about USB devices. This isn't exactly a full "hang" so to speak, as if I plug in a flash drive, I see information and a /dev/sd* entry printed to the screen. Post/pre-init scripts are not run, there is no handoff, nor busybox or VT prompt. Virtual terminals can't be changed (with Ctrl-Alt-Fx). For what I can see, init may have not been executed yet. With certain kernel and OS combinations however, (specifically 3.2.0-29), I get a full boot and am able to use the OS as if there is no problem. After 3.2.0-29, I've been hard pressed to find a kernel that works. Any idea what's happening or how to fix this? Or even a road to take? I've exhausted the first five pages of Google for every search term I can think of. This is a Lenovo Z580 (i5-3210M) with Phoenix SecureCore Tiano firmware, if that helps any.

    Read the article

  • check what process was causing the problem of high cpu load

    - by linuxk
    I'm running nginx wordpress server in KVM using 12.04 server x86. It was running very well about 4 month until 2 hours ago. I found that my website is down and no ping response. Virt-manager logged high cpu load(plz see the picture below) before unexpected shut down. I want to know what process caused unexpected shutdown. The following log files make me think my server is attacked. Any suggestions and help would be appreciated. kern.log and syslog showed me same output. Nov 11 03:54:11 www kernel: [1344541.156239] [UFW BLOCK] IN=eth0 OUT= MAC= SRC=0.0.0.0 DST=224.0. 0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2 Nov 11 03:54:11 www kernel: [1344541.156315] [UFW BLOCK] IN=eth0 OUT= MAC= SRC=0101:080a:2334:c90 0:0100:0000:0000:0000 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=72 TC=0 HOPLIMIT=1 FLOWLBL=0 PROTO=ICMPv6 TYPE=130 CODE=0 /nginx/access.log showed me 119.235.237.17 - - [11/Nov/2012:03:45:29 +0900] "GET /blog HTTP/1.1" 200 30493 "-" "Yeti/1.0 (NHN Corp.; http://help.naver.com/robots/)" my-server-ip - - [11/Nov/2012:11:05:30 +0900] "POST /wp-cron.php?doing_wp_cron=13 HTTP/1.0" 499 0 "-" "WordPress/3.4.2; http://mywebsite.com" Server turned on in here. 119.235.237.16 - - [11/Nov/2012:11:05:30 +0900] "GET /blog HTTP/1.1" 200 32935 "-" "Yeti/1.0 (NHN Corp.; http://help.naver.com/robots/)"

    Read the article

  • Reboot failure after upgrade from 8.04 LTS to 10.04 LTS

    - by Alan Fietz
    I bought our computer from Freegeeks with Ubuntu 8.04 installed. I upgraded from Ubuntu 8.04 to 10.04 on Thursday November 10. I have an ASUS P4P800SE with dual Intel P4@3GHZ. Installation messages were: - Error loading Nautilus config info - Replaced customied /etc/login.defs - Replaced customized /etc/dhcp3/dhclient.conf - 189 packages removed - WARNING: Failed to read mirror file When I rebooted, the usual ASUS screen appeared, then "Loading GRUB" then "starting Up..." then "starting Up..." again then a blank screen (the moniter went dormant). I rebooted, started GRUB and selected: version 10.04.3 LTS kernel 2.6.32-35 generic I got the same results. I rebooted, started GRUB and selected: kernel 2.6.24-29 generic Here's what was displayed: udevd [875]: error getting socket: Invalid argument libudev:udev_monitor_new_from_netlink: error getting socket: Invalid argument Segmentation fault **Gave up waiting for root device** Common problems - Boot args (cat/proc/cmdline) - Check root delay - check root - Missing modules (cat/pro/modules; **Alert! /dev/disk/by_vvid/c59c6361 etc... does not exist. Dropping to a shell.** Then Busybox v1.13.3 started with the following prompt (?) (initramfs) _ But my typing did not appear on the screen. It appears the hard drive cannot be found. Any suggestion on how to remedy this? Thank you.

    Read the article

  • Bad DMA/do_IRQ errors on suspend/resume, with occasional freezing

    - by Steve Kroon
    Every time I suspend or resume my laptop (Dell Latitude E6520, bought this year), I get 2 messages of the form displayed on the console just before shutting down/starting up: [ 407.107610] ehci_hcd 0000:00:1d.0: dma_pool_free buffer-128, f6f18000/36f18000 (bad dma) On occasion, I get a message of the form: [ 3753.979066] do_IRQ: 0.177 No irq handler for vector (irq -1) On occasion, my machine freezes with a flashing Caps Lock button when suspending, after which I need to do a hard shutdown. This never happened before the messages started appearing (a while back), and I think it never happens without a do_IRQ message appearing (although I'm not sure about that). [There's nothing in the owner's manual on a flashing Caps Lock button; apparently it may be a kernel panic if the scroll lock also flashes, but the laptop doesn't have a scroll lock light, and there's no message on the console saying kernel panic.] Are these bad DMA/do IRQ messages serious, and what can I do to investigate/troubleshoot them and the freezing? Edit: I've also now received the following error messages a few times: [246943.023908] JBD: I/O error detected when updating journal superblock for sdb1. [246943.023958] Buffer I/O error on device sdb1, logical block 0 [246943.023996] EXT3-fs (sdb1): I/O error while writing superblock Edit: Output of dmesg at http://pastebin.com/ra7MTQEj ; contents of /var/log/kern.log at http://pastebin.com/i6jf0Md9 Edit: the output of some smartctl (-a, -x, --log=error, --log=xerror) instructions is available at http://paste.ubuntu.com/1088488/ . Edit (31/8/2012): Output of dmesg|grep -i ehci available at http://paste.ubuntu.com/1177246/ .

    Read the article

< Previous Page | 79 80 81 82 83 84 85 86 87 88 89 90  | Next Page >