Search Results

Search found 2692 results on 108 pages for 'ts gateway'.

Page 83/108 | < Previous Page | 79 80 81 82 83 84 85 86 87 88 89 90  | Next Page >

• Multi subnet in ubuntu with dnsmasq

  - by Fox Mulder

  I have a multi lan port box that install ubuntu server 11.10. I am setup network in /etc/network/interfaces file as follow: auto lo iface lo inet loopback auto eth0 iface eth0 inet static      address 192.168.128.254      netmask 255.255.255.0      network 192.168.128.0      broadcast 192.168.128.255      gateway 192.168.128.1      dns-nameservers xxxxxx auto eth1 iface eth1 inet static      address 192.168.11.1      netmask 255.255.255.0      network 192.168.11.0      broadcast 192.168.11.255 auto eth2 iface eth2 inet static      address 192.168.21.1      netmask 255.255.255.0      network 192.168.21.0      broadcast 192.168.21.255 auto eth3 iface eth3 inet static      address 192.168.31.1      netmask 255.255.255.0      network 192.168.31.0      broadcast 192.168.31.255 I am also enable the ip forward by echo 1 /proc/sys/net/ipv4/if_forward in rc.local. my dnsmasq config as follow except-interface=eth0 dhcp-range=interface:eth1,set:wifi,192.168.11.101,192.168.11.200,255.255.255.0 dhcp-range=interface:eth2,set:kids,192.168.21.101,192.168.21.200,255.255.255.0 dhcp-range=interface:eth3,set:game,192.168.31.101,192.168.31.200,255.255.255.0 the dhcp was working fine in eth1,eth2,eth3, any machine plug in the subnet can get correct subnet's ip. My problem was, each subnet machine can't ping each other. for example. 192.168.11.101 can't ping 192.168.21.101 but can ping 192.168.128.1 192.168.31.101 can't ping 192.168.21.101 but can ping 192.168.128.1 I am also try to using route add -net 192.168.11.0 netmask 255.255.255.0 gw 192.168.11.1 (and also 192.168.21.0/192.168.31.0) at this multi-lan-port machine. But still won't work. Does anyone can help ? Thanks.

  Read the article

• Validation and Error Generation when using the Data Mapper Pattern

  - by AndyPerlitch

  I am working on saving state of an object to a database using the data mapper pattern, but I am looking for suggestions/guidance on the validation and error message generation step (step 4 below). Here are the general steps as I see them for doing this: (1) The data mapper is used to get current info (assoc array) about the object in db: +=====================================================+ | person_id | name | favorite_color | age | +=====================================================+ | 1 | Andy | Green | 24 | +-----------------------------------------------------+ mapper returns associative array, eg. Person_Mapper::getPersonById($id) : $person_row = array( 'person_id' => 1, 'name' => 'Andy', 'favorite_color' => 'Green', 'age' => '24', ); (2) the Person object constructor takes this array as an argument, populating its fields. class Person { protected $person_id; protected $name; protected $favorite_color; protected $age; function __construct(array $person_row) { $this->person_id = $person_row['person_id']; $this->name = $person_row['name']; $this->favorite_color = $person_row['favorite_color']; $this->age = $person_row['age']; } // getters and setters... public function toArray() { return array( 'person_id' => $this->person_id, 'name' => $this->name, 'favorite_color' => $this->favorite_color, 'age' => $this->age, ); } } (3a) (GET request) Inputs of an HTML form that is used to change info about the person is populated using Person::getters <form> <input type="text" name="name" value="<?=$person->getName()?>" /> <input type="text" name="favorite_color" value="<?=$person->getFavColor()?>" /> <input type="text" name="age" value="<?=$person->getAge()?>" /> </form> (3b) (POST request) Person object is altered with the POST data using Person::setters $person->setName($_POST['name']); $person->setFavColor($_POST['favorite_color']); $person->setAge($_POST['age']); *(4) Validation and error message generation on a per-field basis - Should this take place in the person object or the person mapper object? - Should data be validated BEFORE being placed into fields of the person object? (5) Data mapper saves the person object (updates row in the database): $person_mapper->savePerson($person); // the savePerson method uses $person->toArray() // to get data in a more digestible format for the // db gateway used by person_mapper Any guidance, suggestions, criticism, or name-calling would be greatly appreciated.

  Read the article

• A Simple Entity Tagger

  - by Elton Stoneman

  In the REST world, ETags are your gateway to performance boosts by letting clients cache responses. In the non-REST world, you may also want to add an ETag to an entity definition inside a traditional service contract – think of a scenario where a consumer persists its own representation of your entity, and wants to keep it in sync. Rather than load every entity by ID and check for changes, the consumer can send in a set of linked IDs and ETags, and you can return only the entities where the current ETag is different from the consumer’s version.  If your entity is a projection from various sources, you may not have a persistent ETag, so you need an efficient way to generate an ETag which is deterministic, so an entity with the same state always generates the same ETag. I have an implementation for a generic ETag generator on GitHub here: EntityTagger code sample. The essence is simple - we get the entity, serialize it and build a hash from the serialized value. Any changes to either the state or the structure of the entity will result in a different hash. To use it, just call SetETag, passing your populated object and a Func<> which acts as an accessor to the ETag property: EntityTagger.SetETag(user, x => x.ETag); The implementation is all in at 80 lines of code, which is all pretty straightforward: var eTagProperty = AsPropertyInfo(eTagPropertyAccessor); var originalETag = eTagProperty.GetValue(entity, null); try { ResetETag(entity, eTagPropertyAccessor); string json; var serializer = new DataContractJsonSerializer(entity.GetType()); using (var stream = new MemoryStream()) { serializer.WriteObject(stream, entity); json = Encoding.UTF8.GetString(stream.GetBuffer(), 0, (int)stream.Length); } var guid = GetDeterministicGuid(json); eTagProperty.SetValue(entity, guid.ToString(), null); //... There are a couple of helper methods to check if the object has changed since the ETag value was last set, and to reset the ETag. This implementation uses JSON to do the serializing rather than XML. Benefit - should be marginally more efficient as your hashing a much smaller serialized string; downside, JSON doesn't include namespaces or class names at the root level, so if you have two classes with the exact same structure but different names, then instances which have the same content will have the same ETag. You may want that behaviour, but change to use the XML DataContractSerializer if you think that will be an issue. If you can persist the ETag somewhere, it will save you server processing to load up the entity, but that will only apply to scenarios where you can reliably invalidate your ETag (e.g. if you control all the entry points where entity contents can be updated, then you can calculate and persist the new ETag with each update).

  Read the article

• Mounting NAS share: Bad Address

  - by Korben

  I've faced to the problem that can't solve. Hope you can help me with it. I have a storage QNAP TS-459U, with it's own Linux, and 'massive1' folder shared, which I need to mount to my Debian server. They are connected by regular patch cord. Debian server has two network interfaces - eth0 and eth1. eth0 is for Internet, eth1 is for QNAP. So, I'm saying this: mount -t cifs //169.254.100.100/massive1/ /mnt/storage -o user=admin , where 169.254.100.100 is an IP of QNAP's interface. The result I get (after entering password): mount error(14): Bad address Refer to the mount.cifs(8) manual page (e.g. man mount.cifs) Tried: mount.cifs, smbmount, with '/' at the end of the network share and without it, and many other variations of that command. And always its: mount error(14): Bad address Funny thing is when I was in Data Center, I had connected my netbook to QNAP by the same scheme (with Fedora 16 on it), and it connected without any problems, I could read/write files on the QNAP's NAS share! So I'm really stuck with the Debian. I can't undrestand where's the difference with Fedora, making this error. Yeah, I've used Google. Couldn't find any useful info. Ping to the QNAP's IP is working, I can log into QNAP's Linux by ssh, telnet on 139's port is working. This is network interface configuration I use in Debian: IP: 169.254.100.1 Netmask: 255.255.0.0 The only diffence in connecting to Fedora and Debian is that in Fedora I've added gateway - 169.254.100.129, but ping to this IP is not working, so I think it's not necessary at all. P.S. ~# cat /etc/debian_version wheezy/sid ~# uname -a Linux host 2.6.32-5-openvz-amd64 #1 SMP Mon Mar 7 22:25:57 UTC 2011 x86_64 GNU/Linux ~# smbtree WORKGROUP \\HOST host server \\HOST\IPC$ IPC Service (host server) \\HOST\print$ Printer Drivers NAS \\MASSIVE1 NAS Server \\MASSIVE1\IPC$ IPC Service (NAS Server) \\MASSIVE1\massive1 \\MASSIVE1\Network Recycle Bin 1 [RAID5 Disk Volume: Drive 1 2 3 4] \\MASSIVE1\Public System default share \\MASSIVE1\Usb System default share \\MASSIVE1\Web System default share \\MASSIVE1\Recordings System default share \\MASSIVE1\Download System default share \\MASSIVE1\Multimedia System default share Please, help me with solving this strange issue. Thanks before.

  Read the article

• Windows Server 2003 Terminal Server does not give out all available licenses (solved)

  - by Erwin Blonk

  I installed the Terminal Server role in Windows Server 2003 Standard 64-bits. Still, only 2 connections are allowed. The License Manager says that there are 10 Device CALs available, which is correct, and that none are given out. For good measure I let the server reboot, to no effect. Before this, there was another server (same Windows, except that it is 32 bits) active as a licensing server. I removed the role first and then then added it to the new server. I then removed the Terminal Server Licensing Server component off the old one and added it to the new one. After that, I added to licenses. When that didn't give the required result, I rebooted to new server. Still, the new server, with licenses and all, acts as if it has the 2 license RDP. The server are all stand-alone, there is no active directory been set up. Both servers are in different workgroups. Update (4/12/10): The server has changed the entries in the Terminal Server Licensing a few times. After installing the licenses it added an entry of which the exact phrasing I forgot but it was about temporary Windows 2003 device licenses. Later it added Windows Server 2003 - TS Per Device CAL. The temporary held 2 licenses (standard RDP licenses, I think) and the other 10. At some point, seemingly unrelated from the testing we did, it used a licenses from the new pool. This morning, 2 licenses were used from the pool of 10 and only 1 from the temporary/RDP pool (I wish I had screenshots to show, it changed every few hours oir so it seems). Although I had already activated the server over the internet, and re-activated it, I decided to go through the whole procedure by phone. Update 2 (4/12/10) The problem has been solved. It seems the activation over the web, while it said to have succeeded, did not work correctly. After activating by phone, it did work. What was different from the old setup and what put me on the wrong foot from that moment, was that I now need to create seperate user account because a session with one user account will be taken over by someone else when that account is used by that person. On the previous server, it was possible to open several sesions with the same account. We now use Per Device licenses, I'm not sure what was used before. Thanks all for the replies.

  Read the article

• XRDP: window manager not starting

  - by niboshi

  I have setup my Ubuntu server so that I can connect and login to XRDP from Windows remote desktop. My problem is that after logging in, no window-manager is started. It only displays a single gnome-terminal with no border and gray meshed background. It seems that /usr/sbin/xrdp-sesman itself is running (from observation of ps and /var/run/xrdp/xrdp-sesman.pid). I put debugging line like touch /home/myname/aaaaa into ~/startwm.sh or /etc/xrdp/startwm.sh, but the file aaaaa did not generated after logging in, so these scripts have not been executed. (Both of them have chmod +x permission.) Am I missing some configuration file, or is there any way of further inspection? Any help is appreciated. Thanks. Contents of /etc/xrdp/sesman.ini [Globals] ListenAddress=127.0.0.1 ListenPort=3350 EnableUserWindowManager=0 # or 1 UserWindowManager=startwm.sh DefaultWindowManager=startwm.sh # or commented-out [Security] AllowRootLogin=1 MaxLoginRetry=4 TerminalServerUsers=tsusers TerminalServerAdmins=tsadmins [Sessions] MaxSessions=10 KillDisconnected=0 IdleTimeLimit=0 DisconnectedTimeLimit=0 [Logging] LogFile=/var/log/xrdp-sesman.log LogLevel=DEBUG EnableSyslog=0 SyslogLevel=DEBUG [X11rdp] param1=-bs param2=-ac param3=-nolisten param4=tcp [Xvnc] param1=-bs param2=-ac param3=-nolisten param4=tcp Contents of /var/log/xrdp-sesman.log after logging in: [20120402-21:29:34] [CORE ] starting sesman with pid 11064 [20120402-21:29:34] [INFO ] listening... [20120402-21:29:39] [INFO ] scp thread on sck 7 started successfully [20120402-21:29:39] [INFO ] granted TS access to user myname [20120402-21:29:39] [INFO ] starting Xvnc session... [20120402-21:29:40] [INFO ] starting xrdp-sessvc - xpid=11074 - wmpid=11073 [20120402-21:29:49] [INFO ] session 11072 - user myname- terminated Process tree Below is a part of ps aufx output during xrdp session: xrdp 12344 0.0 0.4 22856 8732 ? Sl Apr02 0:01 /usr/sbin/xrdp root 12346 0.0 0.0 15672 2000 ? S Apr02 0:00 /usr/sbin/xrdp-sesman root 24346 0.0 0.0 3780 872 ? S 00:00 0:00 \_ /usr/sbin/xrdp-sessvc 24348 24347 myname 24347 0.4 0.6 76468 13700 ? Sl 00:00 0:14 \_ gnome-terminal myname 24362 0.0 0.0 2220 716 ? S 00:00 0:00 | \_ gnome-pty-helper myname 24363 0.0 0.2 6912 5268 pts/13 Ss 00:00 0:00 | \_ bash myname 27902 0.0 0.0 2824 1096 pts/13 R+ 00:53 0:00 | \_ ps aufx myname 24348 0.0 0.9 24984 19216 ? S 00:00 0:01 \_ Xvnc :18 -geometry 1920x1080 -depth 24 -rfbauth /home/myname/.vnc/sesman_myname_passwd -bs -ac -nolisten tcp root 24349 0.0 0.0 16596 1304 ? Sl 00:00 0:00 \_ xrdp-chansrv Environment Ubuntu 11.10 Oneiric xrdp version: 0.5.0~20100303cvs-6ubuntu2

  Read the article

• Forward all traffic through an ssh tunnel

  - by Eamorr

  I hope someone can follow this and I'll explain as best I can. I'm trying to forward all traffic from port 6999 on x.x.x.224, through an ssh tunnel, and onto port 7000 on x.x.x.218. Here is some ASCII art: |browser|-----|Squid on x.x.x.224|------|ssh tunnel|------<satellite link>-----|Squid on x.x.x.218|-----|www| 3128 6999 7000 80 When I remove the ssh tunnel, everything works fine. The idea is to turn off encryption on the ssh tunnel (to save bandwidth) and turn on maximum compression (to save more bandwidth). This is because it's a satellite link. Here's the ssh tunnel I've been using: ssh -C -f -C -o CompressionLevel=9 -o Cipher=none [email protected] -L 7000:172.16.1.224:6999 -N The trouble is, I don't know how to get data from Squid on x.x.x.224 into the ssh tunnel? Am I going about this the wrong way? Should I create an ssh tunnel on x.x.x.218? I use iptables to stop squid on x.x.x.224 from reading port 80, but to feed from port 6999 instead (i.e. via the ssh tunnel). Do I need another iptables rule? Any comments greatly appreciated. Many thanks in advance, Regarding Eduardo Ivanec's question, here is a netstat -i any port 7000 -nn dump from x.x.x.218: 14:42:15.386462 IP 172.16.1.224.40006 > 172.16.1.218.7000: Flags [S], seq 2804513708, win 14600, options [mss 1460,sackOK,TS val 86702647 ecr 0,nop,wscale 4], length 0 14:42:15.386690 IP 172.16.1.218.7000 > 172.16.1.224.40006: Flags [R.], seq 0, ack 2804513709, win 0, length 0 Update 2: When I run the second command, I get the following error in my browser: ERROR The requested URL could not be retrieved The following error was encountered while trying to retrieve the URL: http://109.123.109.205/index.php Zero Sized Reply Squid did not receive any data for this request. Your cache administrator is webmaster. Generated Fri, 01 Jul 2011 16:06:06 GMT by remote-site (squid/2.7.STABLE9) remote-site is 172.16.1.224 When I do a tcpdump -i any port 7000 -nn I get the following: root@remote-site:~# tcpdump -i any port 7000 -nn tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on any, link-type LINUX_SLL (Linux cooked), capture size 65535 bytes channel 2: open failed: connect failed: Connection refused channel 2: open failed: connect failed: Connection refused channel 2: open failed: connect failed: Connection refused channel 2: open failed: connect failed: Connection refused channel 2: open failed: connect failed: Connection refused channel 2: open failed: connect failed: Connection refused channel 2: open failed: connect failed: Connection refused channel 2: open failed: connect failed: Connection refused channel 2: open failed: connect failed: Connection refused channel 2: open failed: connect failed: Connection refused channel 2: open failed: connect failed: Connection refused

  Read the article

• Slow Windows Explorer on Windows 7

  - by MadBoy

  I have Laptop with i7 (4 cores), 8GB ram and SSD OCZ Vertex 3 MaxIOPS which in testing that I did just now does 400mb/s+ read/write. However the responsiveness of Windows Explorer is far from being perfect. Opening up Computer, Documents, going into folders is very slow (1-5seconds). I don't have any viruses or spyware and I have tried changing properties to optimize view for General Items. I tried disabling Search Indexer but it made search in Outlook 2010 crawl and didn't bring any other effect. Even double clicking on file takes some time to open things up (like clicking a Word document). I don't have any drives mapped, my computer is not joined to domain. I have multiple VPN connections that I connect to but they all have disabled default gateways. I tried using CC Cleaner or some Windows 7 Tweaks app to disable some things. I am power user using Visual Studio, Tortoise SVN and other developer/administration apps. Any non obvious ideas? Edit: So I've been trying to pinpoint where the issue comes from and it seems that straight after reboot Windows Explorer opens very fast, when I load 3-4 programs (Royal TS, Visual Studio, Outlook) it's noticeably slower and the more programs I have it gets worse. After I start closing programs it starts working better and if I leave 2 open it's fast again. I tried doing some research with DiskMon and other programs from sysinternals but couldn't find anything suspicious. Below are stats during normal usage with a lots of programs open: - Ram usage with a lot of programs open and no swap file (i disabled it for testing): 6.95GB - CPU usage: 15%, none of the cores takes more then 50% (I have VS 2010 open x 4) HD Tune Pro: OCZ-VERTEX3 MI Benchmark Test capacity: full Read transfer rate Transfer Rate Minimum : 363.9 MB/s Transfer Rate Maximum : 505.5 MB/s Transfer Rate Average : Access Time : Burst Rate : CPU Usage : HD Tune Pro: OCZ-VERTEX3 MI File Benchmark Drive C: Transfer rate test File Size: 500 MB Sequential read 484102 KB/s Sequential write 444714 KB/s Random read 7779 IOPS Random write 16888 IOPS Random read (queue depth = 32) 73007 IOPS Random write (queue depth = 32) 69790 IOPS HD Tune Pro: OCZ-VERTEX3 MI Random Access Test capacity: full Read test Transfer size operations / sec avg. access time max. access time avg. speed 512 bytes 3260 IOPS 0.306 ms 2.106 ms 1.592 MB/s 4 KB 4161 IOPS 0.240 ms 2.006 ms 16.256 MB/s 64 KB 2382 IOPS 0.419 ms 2.367 ms 148.934 MB/s 1 MB 449 IOPS 2.225 ms 4.197 ms 449.407 MB/s Random 809 IOPS 1.235 ms 6.551 ms 410.527 MB/s HD Tune Pro: OCZ-VERTEX3 MI Extra Tests Test capacity: full Random seek 3975 IOPS 0.252 ms 1.941 MB/s Random seek 4 KB 4245 IOPS 0.236 ms 16.583 MB/s Butterfly seek 4086 IOPS 0.245 ms 1.995 MB/s Random seek / size 64 KB 3812 IOPS 0.262 ms 58.606 MB/s Random seek / size 8 MB 120 IOPS 8.348 ms 485.737 MB/s Sequential outer 4524 IOPS 0.221 ms 282.721 MB/s Sequential middle 4429 IOPS 0.226 ms 276.818 MB/s Sequential inner 5504 IOPS 0.182 ms 344.000 MB/s Burst rate 4472 IOPS 0.224 ms 279.475 MB/s

  Read the article

• Small Business Server services will not start, and remote desktop and UAC are broken

  - by Stephen Jennings

  Yesterday I began setting up a server with Windows Small Business Server 2008. All I am configuring it for right now is to be a domain controller and Exchange server. I completed the initial setup of SBS then started looking through different connection options (allowing VPN versus using a TS Gateway). After I rebooted one time, I started having three not-obviously-related issues: First, I could no longer remote desktop into the computer. I ran TCPView and saw that it was no longer listening on port 3389. I checked everything in Terminal Service Configuration but everything shows the computer ought to be allowing connections. Also, when I tried to use anything that required user account control elevation, the UAC dialog never popped up and the program that was waiting just froze. If I try to run "regedit" from the Run box, for example, it never appears. When I run in safe mode which does not run with UAC, I was able to access everything. I didn't want to deal with it, so I turned off UAC and rebooted. Finally, in the Windows SBS Console, there are status indicators for Security, Updates, Backup, and Other Alerts. The first three get stuck saying "Querying". Looking in the computer alerts, I have events showing the following services stopped: Background Intelligent Transfer Service KtmRm for Distributed Transaction Coordinator Distributed Transaction Coordinator Microsoft Exchange Information Store Microsoft Exchange System Attendant Microsoft Exchange Transport Windows Remote Management Update Services Windows Update I figured I must have configured something wrong accidentally and I couldn't find anything using Google explaining what might be the case, so I just decided to format the hard drive and reinstall SBS from scratch. I did this and everything was working last night, but I just turned the machine back on and it is doing the same thing again! On my second install, I did not configure anything except the following (all from SBS Console): Connect to the Internet (set IP and router address) Turn off customer feedback. Set up internet address. Decline to use a Smart Host for email. Added one standard user account. Since this happened again and I was very careful the second time not to configure anything outside of the SBS Console, I feel like there's something else going on. Right now the machine is on an isolated network that does have internet access. My desktop is the only other machine plugged into this network. Any and all help is appreciated (before I tear my hair out!)

  Read the article

• How to force Debian to boot new Kernel?

  - by ThE_-_BliZZarD

  I'm running Debian 6, Debian GNU/Linux, with Linux 2.6.32-5-amd64 under Grub2 ( 1.98+20100804-14+squeeze1) on a remote system (no possibility to view the pre-boot messages). I compiled and installed a new kernel, but I can not get it to boot. What I have done: Installed the packages via: dpkg -i linux-headers-3.5.3.20120914-amd64_3.5.3.20120914-amd64-10.00.Custom_amd64.deb linux-image-3.5.3.20120914-amd64_3.5.3.20120914-amd64-10.00.Custom_amd64.deb This updated the Grub configuration. My /boot/grub/grub.cfg now contains: menuentry 'Debian GNU/Linux, with Linux 3.5.3.20120914-amd64' --class debian --class gnu-linux --class gnu --class os { insmod raid insmod mdraid insmod part_msdos insmod part_msdos insmod ext2 set root='(md0)' search --no-floppy --fs-uuid --set 5a3882a9-c7df-4f6a-9feb-f03e3e37be01 echo 'Loading Linux 3.5.3.20120914-amd64 ...' linux /vmlinuz-3.5.3.20120914-amd64 root=UUID=003242b5-121b-49f3-b32f-1b40aea56eed ro acpi=ht quiet panic=10 echo 'Loading initial ramdisk ...' initrd /initrd.img-3.5.3.20120914-amd64 } menuentry 'Debian GNU/Linux, with Linux 2.6.32-5-amd64' --class debian --class gnu-linux --class gnu --class os { insmod raid insmod mdraid insmod part_msdos insmod part_msdos insmod ext2 set root='(md0)' search --no-floppy --fs-uuid --set 5a3882a9-c7df-4f6a-9feb-f03e3e37be01 echo 'Loading Linux 2.6.32-5-amd64 ...' linux /vmlinuz-2.6.32-5-amd64 root=UUID=003242b5-121b-49f3-b32f-1b40aea56eed ro acpi=ht quiet panic=10 echo 'Loading initial ramdisk ...' initrd /initrd.img-2.6.32-5-amd64 } I used grub-set-default "Debian GNU/Linux, with Linux 2.6.32-5-amd64" to set the old kernel as default and then grub-reboot "Debian GNU/Linux, with Linux 3.5.3.20120914-amd64" to boot into the new kernel once. After update-grub I rebooted the system, but everytime it comes back up with the old kernel (2.6). I tried setting the new one as default (grub-set-default 0, update-grub, reboot) but, still the old one. The Syslogs contain NO hint whatsoever about trying to boot the new kernel - only the old one. Would there be any hints regarding problems with a kernel? Is there a way to enable debug-logging in grub? What am I doing wrong? How can I force the system to boot the new kernel? Edit: Hardware of remote machine. CPU cat /proc/cpuinfo processor : 0 vendor_id : AuthenticAMD cpu family : 16 model : 5 model name : AMD Athlon(tm) II X4 605e Processor stepping : 3 cpu MHz : 2294.898 cache size : 512 KB physical id : 0 siblings : 4 core id : 0 cpu cores : 4 apicid : 0 initial apicid : 0 fpu : yes fpu_exception : yes cpuid level : 5 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm 3dnowext 3dnow constant_tsc rep_good nonstop_tsc extd_apicid pni monitor cx16 popcnt lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt bogomips : 4589.77 TLB size : 1024 4K pages clflush size : 64 cache_alignment : 64 address sizes : 48 bits physical, 48 bits virtual power management: ts ttp tm stc 100mhzsteps hwpstate (copied only the first, 3 more follow) The server is a Fujitsu PRIMERGY MX130 S1.

  Read the article

• Ubuntu with KVM guest VM and broken bridges

  - by MadPsy

  I have an Ubuntu box with a KVM guest VM running. They use bridging so the guest VM attaches to the physical network of its host. The guest VM has 2 NICs in 2 different bridges. First NIC of the VM is tap5 and is in bridge br0 br0 8000.46720f5c572e no eth0.500 tap5 Second NIC of the VM is tap2 and is in bridge br100 br100 8000.76ad2fc96661 no eth0.100 eth0.101 eth0.103 eth0.104 eth0.105 tap2 On the host, br0 has an IP and br100 does not 21: br0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP link/ether 46:72:0f:5c:57:2e brd ff:ff:ff:ff:ff:ff inet 192.168.100.4/24 brd 192.168.10.255 scope global br0 inet6 fe80::d6ae:52ff:febe:777/64 scope link valid_lft forever preferred_lft forever On the guest, its eth0 and eth1 interfaces both have IP addresses 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether 00:3e:61:fb:7a:da brd ff:ff:ff:ff:ff:ff inet 192.168.100.6/24 brd 192.168.100.255 scope global eth0 inet6 fe80::23e:61ff:fefb:7ada/64 scope link valid_lft forever preferred_lft forever 3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether 00:3e:61:fb:7a:ea brd ff:ff:ff:ff:ff:ff inet 172.16.50.129/25 brd 172.16.50.255 scope global eth1 inet6 fe80::23e:61ff:fefb:7aea/64 scope link valid_lft forever preferred_lft forever On the guest VM, a tcpdump of its eth1 interface (tap2) shows traffic from its eth0 interface (tap5), as if the 2 bridges are themselves bridged. This means any interface on br100 is now bridged across to br0 - which is completely broken. root@chillispot:~# tcpdump -c 1 -n -v -i eth1 net 192.168.100.0/24 tcpdump: listening on eth1, link-type EN10MB (Ethernet), capture size 65535 bytes 16:31:24.175583 IP (tos 0x0, ttl 64, id 48054, offset 0, flags [DF], proto TCP (6), length 148) 192.168.100.6.22 > 192.168.100.4.59505: Flags [P.], cksum 0x6c2b (correct), seq 1056321648:1056321744, ack 398642983, win 1700, options [nop,nop,TS val 197473436 ecr 200655363], length 96 What could be bridging the 2 bridges, except the guest VM (which is a stock Ubuntu install)? I am at a complete loss! Thanks.

  Read the article

• How do you splice out a part of an xvid encoded avi file, with ffmpeg? (no problems with other files

  - by yegor

  Im using the following command, which works for most files, except what seems to be xvid encoded ones /usr/bin/ffmpeg -sameq -i file.avi -ss 00:01:00 -t 00:00:30 -ac 2 -r 25 -copyts output.avi So this should basically splice out 30 seconds of video + audio, starting from 1 minute mark. It does START encoding at the 00:01:00 mark but it goes all the way to the end of the file for some reason, ignoring that I want just 30 seconds. The output looks like this. FFmpeg version git-ecc4bdd, Copyright (c) 2000-2010 the FFmpeg developers built on May 31 2010 04:52:24 with gcc 4.4.3 20100127 (Red Hat 4.4.3-4) configuration: --enable-libx264 --enable-libxvid --enable-libmp3lame --enable-libopenjpeg --enable-libfaac --enable-libvorbis --enable-gpl --enable-nonfree --enable-libxvid --enable-pthreads --enable-libfaad --extra-cflags=-fPIC --enable-postproc --enable-libtheora --enable-libvorbis --enable-shared libavutil 50.15. 2 / 50.15. 2 libavcodec 52.67. 0 / 52.67. 0 libavformat 52.62. 0 / 52.62. 0 libavdevice 52. 2. 0 / 52. 2. 0 libavfilter 1.20. 0 / 1.20. 0 libswscale 0.10. 0 / 0.10. 0 libpostproc 51. 2. 0 / 51. 2. 0 [mpeg4 @ 0x17cf770]Invalid and inefficient vfw-avi packed B frames detected Input #0, avi, from 'file.avi': Metadata: ISFT : VirtualDubMod 1.5.10.2 (build 2540/release) Duration: 00:02:00.00, start: 0.000000, bitrate: 1587 kb/s Stream #0.0: Video: mpeg4, yuv420p, 672x368 [PAR 1:1 DAR 42:23], 25 tbr, 25 tbn, 25 tbc Stream #0.1: Audio: ac3, 48000 Hz, 5.1, s16, 448 kb/s File 'lol6.avi' already exists. Overwrite ? [y/N] y Output #0, avi, to 'lol6.avi': Metadata: ISFT : Lavf52.62.0 Stream #0.0: Video: mpeg4, yuv420p, 672x368 [PAR 1:1 DAR 42:23], q=2-31, 200 kb/s, 25 tbn, 25 tbc Stream #0.1: Audio: mp2, 48000 Hz, 2 channels, s16, 64 kb/s Stream mapping: Stream #0.0 -> #0.0 Stream #0.1 -> #0.1 Press [q] to stop encoding [mpeg4 @ 0x17cf770]Invalid and inefficient vfw-avi packed B frames detected [buffer @ 0x184b610]Buffering several frames is not supported. Please consume all available frames before adding a new one. frame= 1501 fps=104 q=0.0 Lsize= 15612kB time=30.02 bitrate=4259.7kbits/s ts/s video:15303kB audio:235kB global headers:0kB muxing overhead 0.482620% if I convert this file to mp4 for example, and then perform the same action, it works perfectly.

  Read the article

• How do you splice out a part of an xvid encoded avi file, with ffmpeg? (no problems with other files)

  - by user11955

  Im using the following command, which works for most files, except what seems to be xvid encoded ones /usr/bin/ffmpeg -sameq -i file.avi -ss 00:01:00 -t 00:00:30 -ac 2 -r 25 -copyts output.avi So this should basically splice out 30 seconds of video + audio, starting from 1 minute mark. It does START encoding at the 00:01:00 mark but it goes all the way to the end of the file for some reason, ignoring that I want just 30 seconds. The output looks like this. FFmpeg version git-ecc4bdd, Copyright (c) 2000-2010 the FFmpeg developers built on May 31 2010 04:52:24 with gcc 4.4.3 20100127 (Red Hat 4.4.3-4) configuration: --enable-libx264 --enable-libxvid --enable-libmp3lame --enable-libopenjpeg --enable-libfaac --enable-libvorbis --enable-gpl --enable-nonfree --enable-libxvid --enable-pthreads --enable-libfaad --extra-cflags=-fPIC --enable-postproc --enable-libtheora --enable-libvorbis --enable-shared libavutil 50.15. 2 / 50.15. 2 libavcodec 52.67. 0 / 52.67. 0 libavformat 52.62. 0 / 52.62. 0 libavdevice 52. 2. 0 / 52. 2. 0 libavfilter 1.20. 0 / 1.20. 0 libswscale 0.10. 0 / 0.10. 0 libpostproc 51. 2. 0 / 51. 2. 0 [mpeg4 @ 0x17cf770]Invalid and inefficient vfw-avi packed B frames detected Input #0, avi, from 'file.avi': Metadata: ISFT : VirtualDubMod 1.5.10.2 (build 2540/release) Duration: 00:02:00.00, start: 0.000000, bitrate: 1587 kb/s Stream #0.0: Video: mpeg4, yuv420p, 672x368 [PAR 1:1 DAR 42:23], 25 tbr, 25 tbn, 25 tbc Stream #0.1: Audio: ac3, 48000 Hz, 5.1, s16, 448 kb/s File 'lol6.avi' already exists. Overwrite ? [y/N] y Output #0, avi, to 'lol6.avi': Metadata: ISFT : Lavf52.62.0 Stream #0.0: Video: mpeg4, yuv420p, 672x368 [PAR 1:1 DAR 42:23], q=2-31, 200 kb/s, 25 tbn, 25 tbc Stream #0.1: Audio: mp2, 48000 Hz, 2 channels, s16, 64 kb/s Stream mapping: Stream #0.0 -> #0.0 Stream #0.1 -> #0.1 Press [q] to stop encoding [mpeg4 @ 0x17cf770]Invalid and inefficient vfw-avi packed B frames detected [buffer @ 0x184b610]Buffering several frames is not supported. Please consume all available frames before adding a new one. frame= 1501 fps=104 q=0.0 Lsize= 15612kB time=30.02 bitrate=4259.7kbits/s ts/s video:15303kB audio:235kB global headers:0kB muxing overhead 0.482620% if I convert this file to mp4 for example, and then perform the same action, it works perfectly.

  Read the article

• Unable to install Xdebug

  - by burnt1ce

  I've registered xdebug in php.ini (as per http://xdebug.org/docs/install) but it's not showing up when i run "php -m" or when i get a test page to run "phpinfo()". I've just installed the latest version of XAMPP. Can anyone provide any suggestions in getting xdebug to show up? This is what i get when i run phpinfo(). **PHP Version 5.3.1** System Windows NT ANDREW_LAPTOP 5.1 build 2600 (Windows XP Professional Service Pack 3) i586 Build Date Nov 20 2009 17:20:57 Compiler MSVC6 (Visual C++ 6.0) Architecture x86 Configure Command cscript /nologo configure.js "--enable-snapshot-build" Server API Apache 2.0 Handler Virtual Directory Support enabled Configuration File (php.ini) Path no value Loaded Configuration File C:\xampp\php\php.ini Scan this dir for additional .ini files (none) Additional .ini files parsed (none) PHP API 20090626 PHP Extension 20090626 Zend Extension 220090626 Zend Extension Build API220090626,TS,VC6 PHP Extension Build API20090626,TS,VC6 Debug Build no Thread Safety enabled Zend Memory Manager enabled Zend Multibyte Support disabled IPv6 Support enabled Registered PHP Streams https, ftps, php, file, glob, data, http, ftp, compress.zlib, compress.bzip2, phar, zip Registered Stream Socket Transports tcp, udp, ssl, sslv3, sslv2, tls Registered Stream Filters convert.iconv.*, string.rot13, string.toupper, string.tolower, string.strip_tags, convert.*, consumed, dechunk, zlib.*, bzip2.* This program makes use of the Zend Scripting Language Engine: Zend Engine v2.3.0, Copyright (c) 1998-2009 Zend Technologies PHP Credits Configuration apache2handler Apache Version Apache/2.2.14 (Win32) DAV/2 mod_ssl/2.2.14 OpenSSL/0.9.8l mod_autoindex_color PHP/5.3.1 mod_apreq2-20090110/2.7.1 mod_perl/2.0.4 Perl/v5.10.1 Apache API Version 20051115 Server Administrator postmaster@localhost Hostname:Port localhost:80 Max Requests Per Child: 0 - Keep Alive: on - Max Per Connection: 100 Timeouts Connection: 300 - Keep-Alive: 5 Virtual Server No Server Root C:/xampp/apache Loaded Modules core mod_win32 mpm_winnt http_core mod_so mod_actions mod_alias mod_asis mod_auth_basic mod_auth_digest mod_authn_default mod_authn_file mod_authz_default mod_authz_groupfile mod_authz_host mod_authz_user mod_cgi mod_dav mod_dav_fs mod_dav_lock mod_dir mod_env mod_headers mod_include mod_info mod_isapi mod_log_config mod_mime mod_negotiation mod_rewrite mod_setenvif mod_ssl mod_status mod_autoindex_color mod_php5 mod_perl mod_apreq2 Directive Local Value Master Value engine 1 1 last_modified 0 0 xbithack 0 0 Apache Environment Variable Value MIBDIRS C:/xampp/php/extras/mibs MYSQL_HOME C:\xampp\mysql\bin OPENSSL_CONF C:/xampp/apache/bin/openssl.cnf PHP_PEAR_SYSCONF_DIR C:\xampp\php PHPRC C:\xampp\php TMP C:\xampp\tmp HTTP_HOST localhost HTTP_CONNECTION keep-alive HTTP_USER_AGENT Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US) AppleWebKit/533.2 (KHTML, like Gecko) Chrome/5.0.342.8 Safari/533.2 HTTP_CACHE_CONTROL max-age=0 HTTP_ACCEPT application/xml,application/xhtml+xml,text/html;q=0.9,text/plain;q=0.8,image/png,*/*;q=0.5 HTTP_ACCEPT_ENCODING gzip,deflate,sdch HTTP_ACCEPT_LANGUAGE en-US,en;q=0.8 HTTP_ACCEPT_CHARSET ISO-8859-1,utf-8;q=0.7,*;q=0.3 PATH C:\Documents and Settings\Andrew\Local Settings\Application Data\Google\Chrome\Application;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;c:\Program Files\Microsoft SQL Server\100\Tools\Binn\;c:\Program Files\Microsoft SQL Server\100\DTS\Binn\;C:\Program Files\QuickTime\QTSystem\;C:\Program Files\Common Files\DivX Shared\;C:\Program Files\WiTopia.Net\bin SystemRoot C:\WINDOWS COMSPEC C:\WINDOWS\system32\cmd.exe PATHEXT .COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH WINDIR C:\WINDOWS SERVER_SIGNATURE <address>Apache/2.2.14 (Win32) DAV/2 mod_ssl/2.2.14 OpenSSL/0.9.8l mod_autoindex_color PHP/5.3.1 mod_apreq2-20090110/2.7.1 mod_perl/2.0.4 Perl/v5.10.1 Server at localhost Port 80</address> SERVER_SOFTWARE Apache/2.2.14 (Win32) DAV/2 mod_ssl/2.2.14 OpenSSL/0.9.8l mod_autoindex_color PHP/5.3.1 mod_apreq2-20090110/2.7.1 mod_perl/2.0.4 Perl/v5.10.1 SERVER_NAME localhost SERVER_ADDR 127.0.0.1 SERVER_PORT 80 REMOTE_ADDR 127.0.0.1 DOCUMENT_ROOT C:/xampp/htdocs SERVER_ADMIN postmaster@localhost SCRIPT_FILENAME C:/xampp/htdocs/test.php REMOTE_PORT 3275 GATEWAY_INTERFACE CGI/1.1 SERVER_PROTOCOL HTTP/1.1 REQUEST_METHOD GET QUERY_STRING no value REQUEST_URI /test.php SCRIPT_NAME /test.php HTTP Headers Information HTTP Request Headers HTTP Request GET /test.php HTTP/1.1 Host localhost Connection keep-alive User-Agent Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US) AppleWebKit/533.2 (KHTML, like Gecko) Chrome/5.0.342.8 Safari/533.2 Cache-Control max-age=0 Accept application/xml,application/xhtml+xml,text/html;q=0.9,text/plain;q=0.8,image/png,*/*;q=0.5 Accept-Encoding gzip,deflate,sdch Accept-Language en-US,en;q=0.8 Accept-Charset ISO-8859-1,utf-8;q=0.7,*;q=0.3 HTTP Response Headers X-Powered-By PHP/5.3.1 Keep-Alive timeout=5, max=80 Connection Keep-Alive Transfer-Encoding chunked Content-Type text/html bcmath BCMath support enabled Directive Local Value Master Value bcmath.scale 0 0 bz2 BZip2 Support Enabled Stream Wrapper support compress.bz2:// Stream Filter support bzip2.decompress, bzip2.compress BZip2 Version 1.0.5, 10-Dec-2007 calendar Calendar support enabled com_dotnet COM support enabled DCOM support disabled .Net support enabled Directive Local Value Master Value com.allow_dcom 0 0 com.autoregister_casesensitive 1 1 com.autoregister_typelib 0 0 com.autoregister_verbose 0 0 com.code_page no value no value com.typelib_file no value no value Core PHP Version 5.3.1 Directive Local Value Master Value allow_call_time_pass_reference On On allow_url_fopen On On allow_url_include Off Off always_populate_raw_post_data Off Off arg_separator.input & & arg_separator.output &amp; &amp; asp_tags Off Off auto_append_file no value no value auto_globals_jit On On auto_prepend_file no value no value browscap C:\xampp\php\extras\browscap.ini C:\xampp\php\extras\browscap.ini default_charset no value no value default_mimetype text/html text/html define_syslog_variables Off Off disable_classes no value no value disable_functions no value no value display_errors On On display_startup_errors On On doc_root no value no value docref_ext no value no value docref_root no value no value enable_dl On On error_append_string no value no value error_log no value no value error_prepend_string no value no value error_reporting 22519 22519 exit_on_timeout Off Off expose_php On On extension_dir C:\xampp\php\ext C:\xampp\php\ext file_uploads On On highlight.bg #FFFFFF #FFFFFF highlight.comment #FF8000 #FF8000 highlight.default #0000BB #0000BB highlight.html #000000 #000000 highlight.keyword #007700 #007700 highlight.string #DD0000 #DD0000 html_errors On On ignore_repeated_errors Off Off ignore_repeated_source Off Off ignore_user_abort Off Off implicit_flush Off Off include_path .;C:\xampp\php\PEAR .;C:\xampp\php\PEAR log_errors Off Off log_errors_max_len 1024 1024 magic_quotes_gpc Off Off magic_quotes_runtime Off Off magic_quotes_sybase Off Off mail.add_x_header Off Off mail.force_extra_parameters no value no value mail.log no value no value max_execution_time 60 60 max_file_uploads 20 20 max_input_nesting_level 64 64 max_input_time 60 60 memory_limit 128M 128M open_basedir no value no value output_buffering no value no value output_handler no value no value post_max_size 128M 128M precision 14 14 realpath_cache_size 16K 16K realpath_cache_ttl 120 120 register_argc_argv On On register_globals Off Off register_long_arrays Off Off report_memleaks On On report_zend_debug On On request_order no value no value safe_mode Off Off safe_mode_exec_dir no value no value safe_mode_gid Off Off safe_mode_include_dir no value no value sendmail_from no value no value sendmail_path no value no value serialize_precision 100 100 short_open_tag Off Off SMTP localhost localhost smtp_port 25 25 sql.safe_mode Off Off track_errors Off Off unserialize_callback_func no value no value upload_max_filesize 128M 128M upload_tmp_dir C:\xampp\tmp C:\xampp\tmp user_dir no value no value user_ini.cache_ttl 300 300 user_ini.filename .user.ini .user.ini variables_order GPCS GPCS xmlrpc_error_number 0 0 xmlrpc_errors Off Off y2k_compliance On On zend.enable_gc On On ctype ctype functions enabled date date/time support enabled "Olson" Timezone Database Version 2009.18 Timezone Database internal Default timezone America/New_York Directive Local Value Master Value date.default_latitude 31.7667 31.7667 date.default_longitude 35.2333 35.2333 date.sunrise_zenith 90.583333 90.583333 date.sunset_zenith 90.583333 90.583333 date.timezone America/New_York America/New_York dom DOM/XML enabled DOM/XML API Version 20031129 libxml Version 2.7.6 HTML Support enabled XPath Support enabled XPointer Support enabled Schema Support enabled RelaxNG Support enabled ereg Regex Library System library enabled exif EXIF Support enabled EXIF Version 1.4 $Id: exif.c 287372 2009-08-16 14:32:32Z iliaa $ Supported EXIF Version 0220 Supported filetypes JPEG,TIFF Directive Local Value Master Value exif.decode_jis_intel JIS JIS exif.decode_jis_motorola JIS JIS exif.decode_unicode_intel UCS-2LE UCS-2LE exif.decode_unicode_motorola UCS-2BE UCS-2BE exif.encode_jis no value no value exif.encode_unicode ISO-8859-15 ISO-8859-15 fileinfo fileinfo support enabled version 1.0.5-dev filter Input Validation and Filtering enabled Revision $Revision: 289434 $ Directive Local Value Master Value filter.default unsafe_raw unsafe_raw filter.default_flags no value no value ftp FTP support enabled gd GD Support enabled GD Version bundled (2.0.34 compatible) FreeType Support enabled FreeType Linkage with freetype FreeType Version 2.3.11 T1Lib Support enabled GIF Read Support enabled GIF Create Support enabled JPEG Support enabled libJPEG Version 7 PNG Support enabled libPNG Version 1.2.40 WBMP Support enabled XBM Support enabled JIS-mapped Japanese Font Support enabled Directive Local Value Master Value gd.jpeg_ignore_warning 0 0 gettext GetText Support enabled hash hash support enabled Hashing Engines md2 md4 md5 sha1 sha224 sha256 sha384 sha512 ripemd128 ripemd160 ripemd256 ripemd320 whirlpool tiger128,3 tiger160,3 tiger192,3 tiger128,4 tiger160,4 tiger192,4 snefru snefru256 gost adler32 crc32 crc32b salsa10 salsa20 haval128,3 haval160,3 haval192,3 haval224,3 haval256,3 haval128,4 haval160,4 haval192,4 haval224,4 haval256,4 haval128,5 haval160,5 haval192,5 haval224,5 haval256,5 iconv iconv support enabled iconv implementation "libiconv" iconv library version 1.13 Directive Local Value Master Value iconv.input_encoding ISO-8859-1 ISO-8859-1 iconv.internal_encoding ISO-8859-1 ISO-8859-1 iconv.output_encoding ISO-8859-1 ISO-8859-1 imap IMAP c-Client Version 2007e SSL Support enabled json json support enabled json version 1.2.1 libxml libXML support active libXML Compiled Version 2.7.6 libXML Loaded Version 20706 libXML streams enabled mbstring Multibyte Support enabled Multibyte string engine libmbfl HTTP input encoding translation disabled mbstring extension makes use of "streamable kanji code filter and converter", which is distributed under the GNU Lesser General Public License version 2.1. Multibyte (japanese) regex support enabled Multibyte regex (oniguruma) version 4.7.1 Directive Local Value Master Value mbstring.detect_order no value no value mbstring.encoding_translation Off Off mbstring.func_overload 0 0 mbstring.http_input pass pass mbstring.http_output pass pass mbstring.http_output_conv_mimetypes ^(text/|application/xhtml\+xml) ^(text/|application/xhtml\+xml) mbstring.internal_encoding no value no value mbstring.language neutral neutral mbstring.strict_detection Off Off mbstring.substitute_character no value no value mcrypt mcrypt support enabled Version 2.5.8 Api No 20021217 Supported ciphers cast-128 gost rijndael-128 twofish arcfour cast-256 loki97 rijndael-192 saferplus wake blowfish-compat des rijndael-256 serpent xtea blowfish enigma rc2 tripledes Supported modes cbc cfb ctr ecb ncfb nofb ofb stream Directive Local Value Master Value mcrypt.algorithms_dir no value no value mcrypt.modes_dir no value no value mhash MHASH support Enabled MHASH API Version Emulated Support ming Ming SWF output library enabled Version 0.4.3 mysql MySQL Support enabled Active Persistent Links 0 Active Links 0 Client API version 5.1.41 Directive Local Value Master Value mysql.allow_local_infile On On mysql.allow_persistent On On mysql.connect_timeout 60 60 mysql.default_host no value no value mysql.default_password no value no value mysql.default_port 3306 3306 mysql.default_socket MySQL MySQL mysql.default_user no value no value mysql.max_links Unlimited Unlimited mysql.max_persistent Unlimited Unlimited mysql.trace_mode Off Off mysqli MysqlI Support enabled Client API library version 5.1.41 Active Persistent Links 0 Inactive Persistent Links 0 Active Links 0 Client API header version 5.1.41 MYSQLI_SOCKET MySQL Directive Local Value Master Value mysqli.allow_local_infile On On mysqli.allow_persistent On On mysqli.default_host no value no value mysqli.default_port 3306 3306 mysqli.default_pw no value no value mysqli.default_socket MySQL MySQL mysqli.default_user no value no value mysqli.max_links Unlimited Unlimited mysqli.max_persistent Unlimited Unlimited mysqli.reconnect Off Off mysqlnd mysqlnd enabled Version mysqlnd 5.0.5-dev - 081106 - $Revision: 289630 $ Command buffer size 4096 Read buffer size 32768 Read timeout 31536000 Collecting statistics Yes Collecting memory statistics No Client statistics bytes_sent 0 bytes_received 0 packets_sent 0 packets_received 0 protocol_overhead_in 0 protocol_overhead_out 0 bytes_received_ok_packet 0 bytes_received_eof_packet 0 bytes_received_rset_header_packet 0 bytes_received_rset_field_meta_packet 0 bytes_received_rset_row_packet 0 bytes_received_prepare_response_packet 0 bytes_received_change_user_packet 0 packets_sent_command 0 packets_received_ok 0 packets_received_eof 0 packets_received_rset_header 0 packets_received_rset_field_meta 0 packets_received_rset_row 0 packets_received_prepare_response 0 packets_received_change_user 0 result_set_queries 0 non_result_set_queries 0 no_index_used 0 bad_index_used 0 slow_queries 0 buffered_sets 0 unbuffered_sets 0 ps_buffered_sets 0 ps_unbuffered_sets 0 flushed_normal_sets 0 flushed_ps_sets 0 ps_prepared_never_executed 0 ps_prepared_once_executed 0 rows_fetched_from_server_normal 0 rows_fetched_from_server_ps 0 rows_buffered_from_client_normal 0 rows_buffered_from_client_ps 0 rows_fetched_from_client_normal_buffered 0 rows_fetched_from_client_normal_unbuffered 0 rows_fetched_from_client_ps_buffered 0 rows_fetched_from_client_ps_unbuffered 0 rows_fetched_from_client_ps_cursor 0 rows_skipped_normal 0 rows_skipped_ps 0 copy_on_write_saved 0 copy_on_write_performed 0 command_buffer_too_small 0 connect_success 0 connect_failure 0 connection_reused 0 reconnect 0 pconnect_success 0 active_connections 0 active_persistent_connections 0 explicit_close 0 implicit_close 0 disconnect_close 0 in_middle_of_command_close 0 explicit_free_result 0 implicit_free_result 0 explicit_stmt_close 0 implicit_stmt_close 0 mem_emalloc_count 0 mem_emalloc_ammount 0 mem_ecalloc_count 0 mem_ecalloc_ammount 0 mem_erealloc_count 0 mem_erealloc_ammount 0 mem_efree_count 0 mem_malloc_count 0 mem_malloc_ammount 0 mem_calloc_count 0 mem_calloc_ammount 0 mem_realloc_count 0 mem_realloc_ammount 0 mem_free_count 0 proto_text_fetched_null 0 proto_text_fetched_bit 0 proto_text_fetched_tinyint 0 proto_text_fetched_short 0 proto_text_fetched_int24 0 proto_text_fetched_int 0 proto_text_fetched_bigint 0 proto_text_fetched_decimal 0 proto_text_fetched_float 0 proto_text_fetched_double 0 proto_text_fetched_date 0 proto_text_fetched_year 0 proto_text_fetched_time 0 proto_text_fetched_datetime 0 proto_text_fetched_timestamp 0 proto_text_fetched_string 0 proto_text_fetched_blob 0 proto_text_fetched_enum 0 proto_text_fetched_set 0 proto_text_fetched_geometry 0 proto_text_fetched_other 0 proto_binary_fetched_null 0 proto_binary_fetched_bit 0 proto_binary_fetched_tinyint 0 proto_binary_fetched_short 0 proto_binary_fetched_int24 0 proto_binary_fetched_int 0 proto_binary_fetched_bigint 0 proto_binary_fetched_decimal 0 proto_binary_fetched_float 0 proto_binary_fetched_double 0 proto_binary_fetched_date 0 proto_binary_fetched_year 0 proto_binary_fetched_time 0 proto_binary_fetched_datetime 0 proto_binary_fetched_timestamp 0 proto_binary_fetched_string 0 proto_binary_fetched_blob 0 proto_binary_fetched_enum 0 proto_binary_fetched_set 0 proto_binary_fetched_geometry 0 proto_binary_fetched_other 0 init_command_executed_count 0 init_command_failed_count 0 odbc ODBC Support enabled Active Persistent Links 0 Active Links 0 ODBC library Win32 Directive Local Value Master Value odbc.allow_persistent On On odbc.check_persistent On On odbc.default_cursortype Static cursor Static cursor odbc.default_db no value no value odbc.default_pw no value no value odbc.default_user no value no value odbc.defaultbinmode return as is return as is odbc.defaultlrl return up to 4096 bytes return up to 4096 bytes odbc.max_links Unlimited Unlimited odbc.max_persistent Unlimited Unlimited openssl OpenSSL support enabled OpenSSL Library Version OpenSSL 0.9.8l 5 Nov 2009 OpenSSL Header Version OpenSSL 0.9.8l 5 Nov 2009 pcre PCRE (Perl Compatible Regular Expressions) Support enabled PCRE Library Version 8.00 2009-10-19 Directive Local Value Master Value pcre.backtrack_limit 100000 100000 pcre.recursion_limit 100000 100000 pdf PDF Support enabled PDFlib GmbH Version 7.0.4p4 PECL Version 2.1.6 Revision $Revision: 277110 $ PDO PDO support enabled PDO drivers mysql, odbc, sqlite, sqlite2 pdo_mysql PDO Driver for MySQL enabled Client API version 5.1.41 PDO_ODBC PDO Driver for ODBC (Win32) enabled ODBC Connection Pooling Enabled, strict matching pdo_sqlite PDO Driver for SQLite 3.x enabled SQLite Library 3.6.20 Phar Phar: PHP Archive support enabled Phar EXT version 2.0.1 Phar API version 1.1.1 CVS revision $Revision: 286338 $ Phar-based phar archives enabled Tar-based phar archives enabled ZIP-based phar archives enabled gzip compression enabled bzip2 compression enabled Native OpenSSL support enabled Phar based on pear/PHP_Archive, original concept by Davey Shafik. Phar fully realized by Gregory Beaver and Marcus Boerger. Portions of tar implementation Copyright (c) 2003-2009 Tim Kientzle. Directive Local Value Master Value phar.cache_list no value no value phar.readonly On On phar.require_hash On On Reflection Reflection enabled Version $Revision: 287991 $ session Session Support enabled Registered save handlers files user sqlite Registered serializer handlers php php_binary wddx Directive Local Value Master Value session.auto_start Off Off session.bug_compat_42 On On session.bug_compat_warn On On session.cache_expire 180 180 session.cache_limiter nocache nocache session.cookie_domain no value no value session.cookie_httponly Off Off session.cookie_lifetime 0 0 session.cookie_path / / session.cookie_secure Off Off session.entropy_file no value no value session.entropy_length 0 0 session.gc_divisor 100 100 session.gc_maxlifetime 1440 1440 session.gc_probability 1 1 session.hash_bits_per_character 5 5 session.hash_function 0 0 session.name PHPSESSID PHPSESSID session.referer_check no value no value session.save_handler files files session.save_path C:\xampp\tmp C:\xampp\tmp session.serialize_handler php php session.use_cookies On On session.use_only_cookies Off Off session.use_trans_sid 0 0 SimpleXML Simplexml support enabled Revision $Revision: 281953 $ Schema support enabled soap Soap Client enabled Soap Server enabled Directive Local Value Master Value soap.wsdl_cache 1 1 soap.wsdl_cache_dir /tmp /tmp soap.wsdl_cache_enabled 1 1 soap.wsdl_cache_limit 5 5 soap.wsdl_cache_ttl 86400 86400 sockets Sockets Support enabled SPL SPL support enabled Interfaces Countable, OuterIterator, RecursiveIterator, SeekableIterator, SplObserver, SplSubject Classes AppendIterator, ArrayIterator, ArrayObject, BadFunctionCallException, BadMethodCallException, CachingIterator, DirectoryIterator, DomainException, EmptyIterator, FilesystemIterator, FilterIterator, GlobIterator, InfiniteIterator, InvalidArgumentException, IteratorIterator, LengthException, LimitIterator, LogicException, MultipleIterator, NoRewindIterator, OutOfBoundsException, OutOfRangeException, OverflowException, ParentIterator, RangeException, RecursiveArrayIterator, RecursiveCachingIterator, RecursiveDirectoryIterator, RecursiveFilterIterator, RecursiveIteratorIterator, RecursiveRegexIterator, RecursiveTreeIterator, RegexIterator, RuntimeException, SplDoublyLinkedList, SplFileInfo, SplFileObject, SplFixedArray, SplHeap, SplMinHeap, SplMaxHeap, SplObjectStorage, SplPriorityQueue, SplQueue, SplStack, SplTempFileObject, UnderflowException, UnexpectedValueException SQLite SQLite support enabled PECL Module version 2.0-dev $Id: sqlite.c 289598 2009-10-12 22:37:52Z pajoye $ SQLite Library 2.8.17 SQLite Encoding iso8859 Directive Local Value Master Value sqlite.assoc_case 0 0 sqlite3 SQLite3 support enabled SQLite3 module version 0.7-dev SQLite Library 3.6.20 Directive Local Value Master Value sqlite3.extension_dir no value no value standard Dynamic Library Support enabled Internal Sendmail Support for Windows enabled Directive Local Value Master Value assert.active 1 1 assert.bail 0 0 assert.callback no value no value assert.quiet_eval 0 0 assert.warning 1 1 auto_detect_line_endings 0 0 default_socket_timeout 60 60 safe_mode_allowed_env_vars PHP_ PHP_ safe_mode_protected_env_vars LD_LIBRARY_PATH LD_LIBRARY_PATH url_rewriter.tags a=href,area=href,frame=src,input=src,form=,fieldset= a=href,area=href,frame=src,input=src,form=,fieldset= user_agent no value no value tokenizer Tokenizer Support enabled wddx WDDX Support enabled WDDX Session Serializer enabled xml XML Support active XML Namespace Support active libxml2 Version 2.7.6 xmlreader XMLReader enabled xmlrpc core library version xmlrpc-epi v. 0.54 php extension version 0.51 author Dan Libby homepage http://xmlrpc-epi.sourceforge.net open sourced by Epinions.com xmlwriter XMLWriter enabled xsl XSL enabled libxslt Version 1.1.26 libxslt compiled against libxml Version 2.7.6 EXSLT enabled libexslt Version 1.1.26 zip Zip enabled Extension Version $Id: php_zip.c 276389 2009-02-24 23:55:14Z iliaa $ Zip version 1.9.1 Libzip version 0.9.0 zlib ZLib Support enabled Stream Wrapper support compress.zlib:// Stream Filter support zlib.inflate, zlib.deflate Compiled Version 1.2.3 Linked Version 1.2.3 Directive Local Value Master Value zlib.output_compression Off Off zlib.output_compression_level -1 -1 zlib.output_handler no value no value Additional Modules Module Name Environment Variable Value no value ::=::\ no value C:=C:\xampp ALLUSERSPROFILE C:\Documents and Settings\All Users APPDATA C:\Documents and Settings\Andrew\Application Data CHROME_RESTART Google Chrome|Whoa! Google Chrome has crashed. Restart now?|LEFT_TO_RIGHT CHROME_VERSION 5.0.342.8 CLASSPATH .;C:\Program Files\QuickTime\QTSystem\QTJava.zip CommonProgramFiles C:\Program Files\Common Files COMPUTERNAME ANDREW_LAPTOP ComSpec C:\WINDOWS\system32\cmd.exe FP_NO_HOST_CHECK NO HOMEDRIVE C: HOMEPATH \Documents and Settings\Andrew LOGONSERVER \\ANDREW_LAPTOP NUMBER_OF_PROCESSORS 2 OS Windows_NT PATH C:\Documents and Settings\Andrew\Local Settings\Application Data\Google\Chrome\Application;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;c:\Program Files\Microsoft SQL Server\100\Tools\Binn\;c:\Program Files\Microsoft SQL Server\100\DTS\Binn\;C:\Program Files\QuickTime\QTSystem\;C:\Program Files\Common Files\DivX Shared\;C:\Program Files\WiTopia.Net\bin PATHEXT .COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH PROCESSOR_ARCHITECTURE x86 PROCESSOR_IDENTIFIER x86 Family 6 Model 15 Stepping 10, GenuineIntel PROCESSOR_LEVEL 6 PROCESSOR_REVISION 0f0a ProgramFiles C:\Program Files PROMPT $P$G QTJAVA C:\Program Files\QuickTime\QTSystem\QTJava.zip SESSIONNAME Console sfxcmd "C:\Documents and Settings\Andrew\My Documents\Downloads\xampp-win32-1.7.3.exe" sfxname C:\Documents and Settings\Andrew\My Documents\Downloads\xampp-win32-1.7.3.exe SystemDrive C: SystemRoot C:\WINDOWS TEMP C:\DOCUME~1\Andrew\LOCALS~1\Temp TMP C:\DOCUME~1\Andrew\LOCALS~1\Temp USERDOMAIN ANDREW_LAPTOP USERNAME Andrew USERPROFILE C:\Documents and Settings\Andrew VS100COMNTOOLS C:\Program Files\Microsoft Visual Studio 10.0\Common7\Tools\ windir C:\WINDOWS AP_PARENT_PID 2216 PHP Variables Variable Value _SERVER["MIBDIRS"] C:/xampp/php/extras/mibs _SERVER["MYSQL_HOME"] C:\xampp\mysql\bin _SERVER["OPENSSL_CONF"] C:/xampp/apache/bin/openssl.cnf _SERVER["PHP_PEAR_SYSCONF_DIR"] C:\xampp\php _SERVER["PHPRC"] C:\xampp\php _SERVER["TMP"] C:\xampp\tmp _SERVER["HTTP_HOST"] localhost _SERVER["HTTP_CONNECTION"] keep-alive _SERVER["HTTP_USER_AGENT"] Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US) AppleWebKit/533.2 (KHTML, like Gecko) Chrome/5.0.342.8 Safari/533.2 _SERVER["HTTP_CACHE_CONTROL"] max-age=0 _SERVER["HTTP_ACCEPT"] application/xml,application/xhtml+xml,text/html;q=0.9,text/plain;q=0.8,image/png,*/*;q=0.5 _SERVER["HTTP_ACCEPT_ENCODING"] gzip,deflate,sdch _SERVER["HTTP_ACCEPT_LANGUAGE"] en-US,en;q=0.8 _SERVER["HTTP_ACCEPT_CHARSET"] ISO-8859-1,utf-8;q=0.7,*;q=0.3 _SERVER["PATH"] C:\Documents and Settings\Andrew\Local Settings\Application Data\Google\Chrome\Application;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;c:\Program Files\Microsoft SQL Server\100\Tools\Binn\;c:\Program Files\Microsoft SQL Server\100\DTS\Binn\;C:\Program Files\QuickTime\QTSystem\;C:\Program Files\Common Files\DivX Shared\;C:\Program Files\WiTopia.Net\bin _SERVER["SystemRoot"] C:\WINDOWS _SERVER["COMSPEC"] C:\WINDOWS\system32\cmd.exe _SERVER["PATHEXT"] .COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH _SERVER["WINDIR"] C:\WINDOWS _SERVER["SERVER_SIGNATURE"] <address>Apache/2.2.14 (Win32) DAV/2 mod_ssl/2.2.14 OpenSSL/0.9.8l mod_autoindex_color PHP/5.3.1 mod_apreq2-20090110/2.7.1 mod_perl/2.0.4 Perl/v5.10.1 Server at localhost Port 80</address> _SERVER["SERVER_SOFTWARE"] Apache/2.2.14 (Win32) DAV/2 mod_ssl/2.2.14 OpenSSL/0.9.8l mod_autoindex_color PHP/5.3.1 mod_apreq2-20090110/2.7.1 mod_perl/2.0.4 Perl/v5.10.1 _SERVER["SERVER_NAME"] localhost _SERVER["SERVER_ADDR"] 127.0.0.1 _SERVER["SERVER_PORT"] 80 _SERVER["REMOTE_ADDR"] 127.0.0.1 _SERVER["DOCUMENT_ROOT"] C:/xampp/htdocs _SERVER["SERVER_ADMIN"] postmaster@localhost _SERVER["SCRIPT_FILENAME"] C:/xampp/htdocs/test.php _SERVER["REMOTE_PORT"] 3275 _SERVER["GATEWAY_INTERFACE"] CGI/1.1 _SERVER["SERVER_PROTOCOL"] HTTP/1.1 _SERVER["REQUEST_METHOD"] GET _SERVER["QUERY_STRING"] no value _SERVER["REQUEST_URI"] /test.php _SERVER["SCRIPT_NAME"] /test.php _SERVER["PHP_SELF"] /test.php _SERVER["REQUEST_TIME"] 1270600868 _SERVER["argv"] Array ( ) _SERVER["argc"] 0 PHP License This program is free software; you can redistribute it and/or modify it under the terms of the PHP License as published by the PHP Group and included in the distribution in the file: LICENSE This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. If you did not receive a copy of the PHP license, or have any questions about PHP licensing, please contact [email protected].

  Read the article

• xt_TCPMSS: bad length messages

  - by Matic

  I'm getting loads of messages like: Jun 23 10:24:20 awakening kernel: [ 1691.596823] xt_TCPMSS: bad length (1492 bytes) Jun 23 10:24:21 awakening kernel: [ 1692.663362] xt_TCPMSS: bad length (1448 bytes) Jun 23 10:24:21 awakening kernel: [ 1692.663495] xt_TCPMSS: bad length (1448 bytes) Jun 23 10:24:21 awakening kernel: [ 1692.663588] xt_TCPMSS: bad length (1448 bytes) Jun 23 10:24:21 awakening kernel: [ 1692.663671] xt_TCPMSS: bad length (1440 bytes) Jun 23 10:24:26 awakening kernel: [ 1697.062914] xt_TCPMSS: bad length (474 bytes) Jun 23 10:24:26 awakening kernel: [ 1697.305525] xt_TCPMSS: bad length (1492 bytes) Jun 23 10:24:27 awakening kernel: [ 1698.946633] xt_TCPMSS: bad length (1492 bytes) Jun 23 10:24:36 awakening kernel: [ 1707.481198] xt_TCPMSS: bad length (1492 bytes) Jun 23 10:24:37 awakening kernel: [ 1708.723526] xt_TCPMSS: bad length (805 bytes) Jun 23 10:24:38 awakening kernel: [ 1709.599461] xt_TCPMSS: bad length (805 bytes) Jun 23 10:24:41 awakening kernel: [ 1712.211052] xt_TCPMSS: bad length (1492 bytes) Jun 23 10:24:41 awakening kernel: [ 1712.260588] xt_TCPMSS: bad length (1492 bytes) Jun 23 10:24:41 awakening kernel: [ 1712.976058] xt_TCPMSS: bad length (1492 bytes) Jun 23 10:24:43 awakening kernel: [ 1714.225209] xt_TCPMSS: bad length (1492 bytes) Jun 23 10:24:43 awakening kernel: [ 1714.914961] xt_TCPMSS: bad length (1492 bytes) Jun 23 10:24:55 awakening kernel: [ 1726.192696] xt_TCPMSS: bad length (1480 bytes) Jun 23 10:24:55 awakening kernel: [ 1726.192825] xt_TCPMSS: bad length (1480 bytes) In my dmesg/syslog. This linux machine is among other things used as an internet gateway. Connection is over PPPoE. I have the following line in my iptables script: $IPT -A FORWARD -p tcp --tcp-flags SYN,RST SYN -j TCPMSS --clamp-mss-to-pmtu # PPPoE fix The frequency of this messages increased 10x when I upgraded from Debian lenny with 2.6.27 to squeeze with 2.6.32 few days ago. Why am I seeing this messages and how can I fix them?

  Read the article

• Yum update not working on CentOS 6.2 minimal install

  - by Owen

  Note: This is my first question on the stack exchange network so please give mercy and provide guidance where needed. I have installed a CentOS 6.2 KVM guest and I am having problem getting yum to work. This is my first time working with CentOS so I feel that it's a setting somewhere that I am missing but cannot find using google. Here are my steps; Downloaded CentOS-6.2-x86_64-minimal.iso, booted, and went through default steps (only questions asked where keyboard, timezone, root password and use entire hdd) Restarted, logged in, pinged google.com to no avail Set the following settings; vi /etc/resolv.conf nameserver 8.8.8.8 nameserver 8.8.4.4 vi /etc/sysconfig/network-scripts/ifcfg-eth0 DEVICE="eth0" HWADDR="52:54:00:42:1B:4A" #NM_CONTROLLED="yes" BOOTPROTO=none ONBOOT="yes" NETMASK=255.255.255.0 IPADDR=192.168.122.151 TYPE=Ethernet vi /etc/sysconfig/network NETWORKING=yes NETWORKING_IPV6=no HOSTNAME=server3.example.com GATEWAY=192.168.122.1 I can now ping google.com ping google.com PING google.com (173.194.70.139) 56(84) bytes of data. 64 bytes from fa-in-f139.1e100.net (173.194.70.139): icmp_seq=1 ttl=50 time=5.88 ms 64 bytes from fa-in-f139.1e100.net (173.194.70.139): icmp_seq=2 ttl=50 time=5.77 ms But I cannot 'yum update' yum update Loaded plugins: fastestmirror, presto Loading mirror speeds from cached hostfile Could not retrieve mirrorlist http://mirrorlist.centos.org/?release=6&arch=x86_64&repo=os error was 14: PYCURL ERROR 7 - "Failed to connect to 2a01:c0:2:4:216:3eff:fe0d:266d: Network is unreachable" Error: Cannot find a valid baseurl for repo: base My KVM guest is also NAT'd incase it's of concern.

  Read the article

• Remote App Authentication Error (Code:0x507)

  - by CMK

  Hi I'm trying to get RDP services running with Windows 2008 R2. I'm at a WINXP SP3 client that was modified to run RDP with NLA. When I start the client connect to the local DC and get an authentification error (Code 0x507). I've already done the following: • Server Setup to run as a standalone local "DC" to provide Terminal services to a single application. Remote Desktop Session Host CAL License is running & operational, RD Gateway Manager w/ Local Server RAP & CAP running NLA & operational etc..... Server has NLA & temporary use of port 3389 (which is directly connected to and accessible from the internet (I am planning to change the port to 443, but want to get the current system running first). • XP Client(s): RDP-Version on win xp clients is 6.1 If had SP2, then added SP3 and edited the registry settings to allow NLA, by: Click Start, click Run, type regedit, and then press ENTER. In the navigation pane, locate and then click the following registry subkey: HKEY_LOCAL_MACHINE \SYSTEM\CurrentControlSet\Control\Lsa In the details pane, right-click Security Packages, and then click Modify. In the Value data box, type tspkg. Leave any data that is specific to other SSPs, and then click OK. In the navigation pane, locate and then click the following registry subkey: HKEY_LOCAL_MACHINE \SYSTEM\CurrentControlSet\Control\SecurityProviders In the details pane, right-click SecurityProviders, and then click Modify. In the Value data box, type credssp.dll. Leave any data that is specific to other SSPs, and then click OK. Exit Registry Editor. Restart the computer.

  Read the article

• Windows 2003 Domain Controller Very Upset about NIC Teaming

  - by Kyle Brandt

  I set up BACS (Broadcom Teaming) to team two NIC on a Windows 2003 Active Directory Domain Controller. Networking still works okay, I can ping the gateway etc, but both DNS and Active Directory fail to start with various 40xx errors. The team that I created is Smart load Balancing with Failover, with one backup and only one in smart load balancing (So really it is just failover). I have the team the same IP address that the single active NIC had before. Anyone seen this before, or have any ideas what the problem might be? Event Type: Error Event Source: DNS Event Category: None Event ID: 4015 Date: 3/7/2010 Time: 10:33:03 AM User: N/A Computer: ADC Description: The DNS server has encountered a critical error from the Active Directory. Check that the Active Directory is functioning properly. The extended error debug information (which may be empty) is "". The event data contains the error. Event Type: Error Event Source: DNS Event Category: None Event ID: 4004 Date: 3/7/2010 Time: 10:33:03 AM User: N/A Computer: ADC Description: The DNS server was unable to complete directory service enumeration of zone .. This DNS server is configured to use information obtained from Active Directory for this zone and is unable to load the zone without it. Check that the Active Directory is functioning properly and repeat enumeration of the zone. The extended error debug information (which may be empty) is "". The event data contains the error. Event Type: Error Event Source: NTDS Replication Event Category: DS RPC Client Event ID: 2087 Date: 3/7/2010 Time: 10:40:28 AM User: NT AUTHORITY\ANONYMOUS LOGON Computer: ADC Description: Active Directory could not resolve the following DNS host name of the source domain controller to an IP address. This error prevents additions, deletions and changes in Active Directory from replicating between one or more domain controllers in the forest. Security groups, group policy, users and computers and their passwords will be inconsistent between domain controllers until this error is resolved, potentially affecting logon authentication and access to network resources.

  Read the article

• Compress Large Video Files with DivX / Xvid and AutoGK

  - by DigitalGeekery

  Have you ever recorded home video on a camcorder only to find the video size is enormous? What if you wanted to share a video clip on YouTube or another video sharing site, but the file size was bigger than the maximum upload size? Today we’ll look at a way to compress certain video files, such as MPEG and AVI, with Auto Gordian Knot (AutoGK). AutoGK is a free application that runs on Windows. It supports Mpeg1, Mpeg2, Transport Streams, Vobs, and virtually any codec used for an .AVI file. AutoGK will accept as input the following file types: MPG, MPEG, VOB, VRO, M2V, DAT, IFO, TS, TP, TRP, M2T, and AVI. Files are output as .AVI files and are converted using the DivX or XviD codecs. Installing and Using AutoGK Download and install AutoGK (link below) Open the AutoGK. You’ll need to navigate a few wizard screens, but you can just accept the defaults.   Choose your video file by clicking on the folder to the right of the Input file text box.   Browse for and select your video file and click “Open.”   For this example, we’ll be working with an .AVI file that’s 167MB in size.   The output file is copied into the same directory as the input file by default, but you can change this if you choose. If the input file is also .AVI, AutoGK will append an _agk to the output file so that the original is not overwritten. Next, you’ll see any audio tracks listed. You can unselect the check box if you’d like to remove the audio track. You can choose one of the Predefined size options… Or, select a Custom size in MB or Target Quality in percentage. For our example, we’ll be compressing our 167MB file to 35MB. Click on Advanced Settings. Here you can choose your codec, if you have a preference, as well as output resolution and output audio. If you’d like to use the DivX codec, you’ll need to download and install it separately. (See link below) Typically you’ll want to keep the defaults. Click “OK.” Now you’re ready to add your file conversion job to the Job queue. Click Add Job to add it to the queue. You can add multiple files conversions to the job queue and  convert them in one batch. Click Start to begin the conversion process. The process will begin. You’ll be able to see the progress in the Log window on the bottom left. When the conversion is complete you’ll see a “Job finished” and the total time in the log window.   Check your output file to see it’s compressed size. Test your video just to make sure the output quality is satisfactory.   Note:  Conversion times can vary greatly depending on the size of the file and your computer hardware. Files that are several GBs in size may take several hours to compress. AutoGK is no longer being actively developed but is still a wonderful DivX/XviD conversion tool. It can also be used to compress and convert non-copy protected DVDs. Downloads AutoGordianKnot DivX (optional) Similar Articles Productive Geek Tips Use Your Mac Mini as a Media Server Part 2Make Disk Cleanup Compress Older(or Newer) Files on XPMysticgeek Blog: Exclusive Look Inside Vreel – Including Interview With Vreel Founder!Friday Fun: Watch HD Video Content with MeevidConvert a DVD Movie Directly to AVI with FairUse Wizard 2.9 TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Penolo Lets You Share Sketches On Twitter Visit Woolyss.com for Old School Games, Music and Videos Add a Custom Title in IE using Spybot or Spyware Blaster When You Need to Hail a Taxi in NYC Live Map of Marine Traffic NoSquint Remembers Site Specific Zoom Levels (Firefox)

  Read the article

• Zscaler. Certs, cookies, and port 80 traffic

  - by 54's_lol

  So I work at HQ for a large company that shall remain nameless. We use Zscaler and I had to roll out a 2048 cert per zscaler's request. People around me at work dont understand the technology and think that the cert's are what is allowing internet connectivity. From my understanding(and please chime in) is the cookie located C:\Users\$$$$$$4$$\AppData\Roaming\Macromedia\Flash Player#SharedObjects\Q3JQJQJV\gateway.zscaler.net\zscaler.swf here that gets created when you provide your creds the first time you use the browser. The cert's are just simply a way of inspecting the SSL traffic as zscaler had no way of doing this before without them. They are essentially using the classic MITM attack to parse your SSL traffic. Gmail is smart enough to recognize this as you get a warning. My question is this, is there a product or service that I can use to verify my web browser when at home(I.E. off company network) isn't still getting routed to zscaler's cloud? If i do a tracert that will work fine. It's the port 80 and 443 web traffic zscaler and my company is after. I would like to verify that when I'm off their premise that my web traffic is using only my isp and the path to whatever content I'm searching for. Do the cert's i'm pushing and browser authentication do something behind the curtain that forces web traffic to get routed to zscaler? I searched quite a bit and would very much like to know if I'm ever off company scrutiny. I do know zscaler offers the service to force the scenario im asking about. Can I prove how my web traffic is getting routed? Thanks for any insight. I've been a fan for a long time and your guy's kung fu is very strong:-)

  Read the article

• Cant correctly install Lazarus

  - by user206316

  I have a little problem with installing and running Lazarus. I just upgrade ubuntu from 13.04 to 13.10. When i had 13.04, i could install lazarus without any problems, but in 13.10 lazarus magicaly dissapeared, and when i tried install it from ubuntu software center, it said something like in my software resources lazarus-ide-0.9.30.4 doesnt exist. After some research on net i tried delete all files from earlier installations, download deb packages from sourceforge and install them, but when i want to instal fpc-src, error shows up with output: (Reading database ... 100% (Reading database ... 239063 files and directories currently installed.) Unpacking fpc-src (from .../Stiahnut/Lazarus/fpc-src.deb) ... dpkg: error processing /home/richi/Stiahnut/Lazarus/fpc-src.deb (--install): trying to overwrite '/usr/share/fpcsrc/2.6.2/rtl/nativent/tthread.inc', which is also in package fpc-source-2.6.2 2.6.2-5 dpkg-deb (subprocess): decompressing archive member: internal gzip write error: Broken pipe dpkg-deb: error: subprocess <decompress> returned error exit status 2 dpkg-deb (subprocess): cannot copy archive member from '/home/richi/Stiahnut/Lazarus/fpc-src.deb' to decompressor pipe: failed to write (Broken pipe) when i started lazarus, it of course tell me that it cant find fpc compier and fpc sources. So, please, i really need program for school and i dont wanna reinstall os anymore or something like that :( (Ubuntu 13.10 64bit) P.S: im not skilled in linux so if u know some commands to fix it just write them for copy and paste :) P.P.S:Sorry for bad English, im Slovak xD P.P.P.S: Thank so much for any answers update: output from sudo dpkg -l | grep "^rc" richi@Richi-Ubuntu:~/lazarus1.0.12$ sudo dpkg -l | grep "^rc" rc account-plugin-generic-oauth 0.10bzr13.03.26-0ubuntu1.1 amd64 GNOME Control Center account plugin for single signon - generic OAuth rc appmenu-gtk:amd64 12.10.3daily13.04.03-0ubuntu1 amd64 Export GTK menus over DBus rc appmenu-gtk3:amd64 12.10.3daily13.04.03-0ubuntu1 amd64 Export GTK menus over DBus rc fp-compiler-2.6.0 2.6.0-9 amd64 Free Pascal - compiler rc fp-utils-2.6.0 2.6.0-9 amd64 Free Pascal - utilities rc lazarus-ide-0.9.30.4 0.9.30.4-4 amd64 IDE for Free Pascal - common IDE files rc lazarus-ide-1.0.10 1.0.10+dfsg-1 amd64 IDE for Free Pascal - common IDE files rc lcl-utils-0.9.30.4 0.9.30.4-4 amd64 Lazarus Components Library - command line build tools rc lcl-utils-1.0.10 1.0.10+dfsg-1 amd64 Lazarus Components Library - command line build tools rc libbamf3-1:amd64 0.4.0daily13.06.19~13.04-0ubuntu1 amd64 Window matching library - shared library rc libboost-filesystem1.49.0 1.49.0-4 amd64 filesystem operations (portable paths, iteration over directories, etc) in C++ rc libboost-signals1.49.0 1.49.0-4 amd64 managed signals and slots library for C++ rc libboost-system1.49.0 1.49.0-4 amd64 Operating system (e.g. diagnostics support) library rc libboost-thread1.49.0 1.49.0-4 amd64 portable C++ multi-threading rc libbrlapi0.5:amd64 4.4-8ubuntu4 amd64 braille display access via BRLTTY - shared library rc libcamel-1.2-40 3.6.4-0ubuntu1.1 amd64 Evolution MIME message handling library rc libcolumbus0-0 0.4.0daily13.04.16~13.04-0ubuntu1 amd64 error tolerant matching engine - shared library rc libdns95 1:9.9.2.dfsg.P1-2ubuntu2.1 amd64 DNS Shared Library used by BIND rc libdvbpsi7 0.2.2-1 amd64 library for MPEG TS and DVB PSI tables decoding and generating rc libebackend-1.2-5 3.6.4-0ubuntu1.1 amd64 Utility library for evolution data servers rc libedata-book-1.2-15 3.6.4-0ubuntu1.1 amd64 Backend library for evolution address books rc libedata-cal-1.2-18 3.6.4-0ubuntu1.1 amd64 Backend library for evolution calendars rc libgc1c3:amd64 1:7.2d-0ubuntu5 amd64 conservative garbage collector for C and C++ rc libgd2-xpm:amd64 2.0.36~rc1~dfsg-6.1ubuntu1 amd64 GD Graphics Library version 2 rc libgd2-xpm:i386 2.0.36~rc1~dfsg-6.1ubuntu1 i386 GD Graphics Library version 2 rc libgnome-desktop-3-4 3.6.3-0ubuntu1 amd64 Utility library for loading .desktop files - runtime files rc libgphoto2-2:amd64 2.4.14-2 amd64 gphoto2 digital camera library rc libgphoto2-2:i386 2.4.14-2 i386 gphoto2 digital camera library rc libgphoto2-port0:amd64 2.4.14-2 amd64 gphoto2 digital camera port library rc libgphoto2-port0:i386 2.4.14-2 i386 gphoto2 digital camera port library rc libgtksourceview-3.0-0:amd64 3.6.3-0ubuntu1 amd64 shared libraries for the GTK+ syntax highlighting widget rc libgweather-3-1 3.6.2-0ubuntu1 amd64 GWeather shared library rc libharfbuzz0:amd64 0.9.13-1 amd64 OpenType text shaping engine rc libibus-1.0-0:amd64 1.4.2-0ubuntu2 amd64 Intelligent Input Bus - shared library rc libical0 0.48-2 amd64 iCalendar library implementation in C (runtime) rc libimobiledevice3 1.1.4-1ubuntu6.2 amd64 Library for communicating with the iPhone and iPod Touch rc libisc92 1:9.9.2.dfsg.P1-2ubuntu2.1 amd64 ISC Shared Library used by BIND rc libkms1:amd64 2.4.46-1 amd64 Userspace interface to kernel DRM buffer management rc libllvm3.2:i386 1:3.2repack-7ubuntu1 i386 Low-Level Virtual Machine (LLVM), runtime library rc libmikmod2:amd64 3.1.12-5 amd64 Portable sound library rc libpackagekit-glib2-14:amd64 0.7.6-3ubuntu1 amd64 Library for accessing PackageKit using GLib rc libpoppler28:amd64 0.20.5-1ubuntu3 amd64 PDF rendering library rc libraw5:amd64 0.14.7-0ubuntu1.13.04.2 amd64 raw image decoder library rc librhythmbox-core6 2.98-0ubuntu5 amd64 support library for the rhythmbox music player rc libsdl-mixer1.2:amd64 1.2.12-7ubuntu1 amd64 Mixer library for Simple DirectMedia Layer 1.2, libraries rc libsnmp15 5.4.3~dfsg-2.7ubuntu1 amd64 SNMP (Simple Network Management Protocol) library rc libsyncdaemon-1.0-1 4.2.0-0ubuntu1 amd64 Ubuntu One synchronization daemon library rc libunity-core-6.0-5 7.0.0daily13.06.19~13.04-0ubuntu1 amd64 Core library for the Unity interface. rc libusb-0.1-4:i386 2:0.1.12-23.2ubuntu1 i386 userspace USB programming library rc libwayland0:amd64 1.0.5-0ubuntu1 amd64 wayland compositor infrastructure - shared libraries rc linux-image-3.8.0-19-generic 3.8.0-19.30 amd64 Linux kernel image for version 3.8.0 on 64 bit x86 SMP rc linux-image-3.8.0-31-generic 3.8.0-31.46 amd64 Linux kernel image for version 3.8.0 on 64 bit x86 SMP rc linux-image-extra-3.8.0-19-generic 3.8.0-19.30 amd64 Linux kernel image for version 3.8.0 on 64 bit x86 SMP rc linux-image-extra-3.8.0-31-generic 3.8.0-31.46 amd64 Linux kernel image for version 3.8.0 on 64 bit x86 SMP rc screen-resolution-extra 0.15ubuntu1 all Extension for the GNOME screen resolution applet rc unity-common 7.0.0daily13.06.19~13.04-0ubuntu1 all Common files for the Unity interface.

  Read the article

• Can't connect to computer via SBS2011 RWA

  - by sbrattla

  I've got an SBS 2011 Essentials server. Users a able to log on to Remote Web Access using their username and password. However, the trouble starts when a users attempts to log on remotely to his/her computer from the Remote Web Access website. When the user clicks on his/her computer (in the RWA website), the user is first presented with a window listing Publisher, Type, Remote Computer name and Gateway Server. Everything seems fine here, and the user clicks Connect. The user credentials are provided, and a connection is attempted. However, the logon attempt always fails with the message "The logon attempt failed". The logon attempt always generates three log events in the server log: EventId: 4672 - Special Logon EventId: 4624 - Logon EventId: 4634 - Logoff All events happens have the same timestamp. No events are logged on the client machine which the user attempts to log on to. Others have solved this by going to their IIS server and enable "Windows Authentication" for Rpc and RpcWithCert (in Default Web Site). However, this is in place on the server. I've also got RD CAPs and RD RAPs in place. As a side note; if i try to connect to any of the machines using the Remote Desktop Connection using the "Connect from anywhere" functionality - then things work flawlessly! In other words, the error only occurs when attempting to login to a computer via the Remote Web Access website. I've run out of ideas for how I can solve this (too many hours spent). Any ideas highly appreciated!

  Read the article

• WebDav rename fails on an Apache mod_dav install behind NginX

  - by The Daemons Advocate

  I'm trying to solve a problem with renaming files over WebDav. Our stack consists of a single machine, serving content through Nginx, Varnish and Apache. When you try to rename a file, the operation fails with the stack that we're currently using. To connect to WebDav, a client program must: Connect over https://host:443 to NginX NginX unwraps and forwards the request to a Varnish server on http://localhost:81 Varnish forwards the request to Apache on http://localhost:82, which offers a session via mod_dav Here's an example of a failed rename: $ cadaver https://webdav.domain/ Authentication required for Webdav on server `webdav.domain': Username: user Password: dav:/> cd sandbox dav:/sandbox/> mkdir test Creating `test': succeeded. dav:/sandbox/> ls Listing collection `/sandbox/': succeeded. Coll: test 0 Mar 12 16:00 dav:/sandbox/> move test newtest Moving `/sandbox/test' to `/sandbox/newtest': redirect to http://webdav.domain/sandbox/test/ dav:/sandbox/> ls Listing collection `/sandbox/': succeeded. Coll: test 0 Mar 12 16:00 For more feedback, the WebDrive windows client logged an error 502 (Bad Gateway) and 303 (?) on the rename operation. The extended logs gave this information: Destination URI refers to different scheme or port (https://hostname:443) (want: http://hostname:82). Some other Restrictions: Investigations into NginX's Webdav modules show that it doesn't really fit our needs, and forwarding webdav traffic to Apache isn't an option because we don't want to enable Apache SSL. Are there any ways to trick mod_dav to forward to another host? I'm open to ideas :).

  Read the article

• haproxy and tomcat intermittent hangs

  - by Lorin

  I am trying to run haproxy in front of tomcat on a Solaris x86 box, but I am getting intermittent failures. At seemingly random intervals, the request just hangs until haproxy times out the connection. I thought maybe it was my app, but I've been able to reproduce it with the tomcat manager app, and hitting tomcat directly there is no problems at all. Hitting it repeatedly with curl will cause the error within 10-15 tries curl -ikL http://admin:admin@<my server>:81/manager/status haproxy is running on port 81, tomcat on port 7000. haproxy returns a 504 gateway timeout to the client, and puts this into the log file: Sep 7 21:39:53 localhost haproxy[16887]: xxx.xxx.xxx.xxx:65168 [07/Sep/2009:21:39:23.005] http_proxy http_proxy/tomcat7000 5/0/0/-1/30014 504 194 - - sHNN 0/0/0/0/0 0/0 "GET /manager/status HTTP/1.1" Tomcat shows nothing, no error in the logs and no indication that the request ever makes it to the tomcat server. The request count is not incremented, the manager app only shows activity on one thread, serving up the manager app. Here are my haproxy and tomcat connector settings, I've been playing with both a good deal trying to chase down the issue, so they may not be ideal, but they definitely don't seem like they should cause this error. server.xml <Connector port="7000" protocol="HTTP/1.1" enableLookups="false" maxKeepAliveRequests="1" connectionLinger="10" /> haproxy config global log loghost local0 chroot /var/haproxy listen http_proxy :81 mode http log global option httplog option httpclose clitimeout 150000 srvtimeout 30000 contimeout 3000 balance roundrobin cookie SERVERID insert server tomcat7000 127.0.0.1:7000 cookie server00 check inter 2000

  Read the article

• Duplicate ping packages in Linux VirtualBox machine

  - by Darkmage

  i cant seem t figure out what is going on here. The Linux machine I am using is running as a VM on a Win7 machine using Virtual Box running as a service. If i ping the win7 Host i get ok result. root@Virtual-Box:/home/glennwiz# ping -c 100000 -s 10 -i 0.02 192.168.1.100 PING 192.168.1.100 (192.168.1.100) 10(38) bytes of data. 18 bytes from 192.168.1.100: icmp_seq=1 ttl=128 time=1.78 ms 18 bytes from 192.168.1.100: icmp_seq=2 ttl=128 time=1.68 ms if i ping localhost im ok root@Virtual-Box:/home/glennwiz# ping -c 100000 -s 10 -i 0.02 localhost PING localhost (127.0.0.1) 10(38) bytes of data. 18 bytes from localhost (127.0.0.1): icmp_seq=1 ttl=64 time=0.255 ms 18 bytes from localhost (127.0.0.1): icmp_seq=2 ttl=64 time=0.221 ms but if i ping gateway i get DUP packets root@Virtual-Box:/home/glennwiz# ping -c 100000 -s 10 -i 0.02 192.168.1.1 PING 192.168.1.1 (192.168.1.1) 10(38) bytes of data. 18 bytes from 192.168.1.1: icmp_seq=1 ttl=64 time=1.27 ms 18 bytes from 192.168.1.1: icmp_seq=1 ttl=64 time=1.46 ms (DUP!) 18 bytes from 192.168.1.1: icmp_seq=2 ttl=64 time=22.1 ms 18 bytes from 192.168.1.1: icmp_seq=2 ttl=64 time=22.4 ms (DUP!) if i ping other machine on same LAN i stil get dups. pinging remote hosts also gives (DUP!) result root@Virtual-Box:/home/glennwiz# ping -c 100000 -s 10 -i 0.02 www.vg.no PING www.vg.no (195.88.55.16) 10(38) bytes of data. 18 bytes from www.vg.no (195.88.55.16): icmp_seq=1 ttl=245 time=10.0 ms 18 bytes from www.vg.no (195.88.55.16): icmp_seq=1 ttl=245 time=10.3 ms (DUP!) 18 bytes from www.vg.no (195.88.55.16): icmp_seq=2 ttl=245 time=10.3 ms 18 bytes from www.vg.no (195.88.55.16): icmp_seq=2 ttl=245 time=10.6 ms (DUP!)

  Read the article

< Previous Page | 79 80 81 82 83 84 85 86 87 88 89 90  | Next Page >