Search Results

Search found 19412 results on 777 pages for 'multiple resultsets'.

Page 84/777 | < Previous Page | 80 81 82 83 84 85 86 87 88 89 90 91  | Next Page >

  • Default setting for dual monitors (using Win+P)

    - by Tomek
    I have two displays (one monitor and one TV) connected to my card via DVI. I switch between them with Win+P (when I'm using XBMC I set "only projector"). Most of the time, I use it during late hours, so I just turn off the PC (with XBMC's option "shutdown") and go to sleep. All fine, but on the next day my display is changed (to "only projector"). Bottom line is - how can I set my Windows 7 to have "only monitor" each time system boots?

    Read the article

  • Use only external monitor at screen's native resolution

    - by joaoc
    My laptop's screen lamp just died (I can see content on the screen if I point a light at it) and I was using it with an external monitor. I can switch from extended desktop to mirrored mode but, and here is where I need help, the resolutions don't match. The laptop's resolution is 1600x1200 and the external monitor is 1680x1050. I am ok with just using one screen ATM but I would like for it to at least use the native resolution of the external monitor. This is Windows XP and under Monitor settings I only get the resolutions for the original monitor under mirrored mode. How can I force the screen into a resolution not supported by the laptop screen but that is a native resolution for the external monitor?

    Read the article

  • How to move windows that open up offscreen?

    - by Matthew Scharley
    I have a dual monitor setup, and I recently played around with the positioning settings, and some of my single window applications do the favour of preserving where they were last closed, and opening in the same position later. Unfortuanately, that now places them out of the viewable area of my screens! Is there some way to force a particular window into the viewable area? If it matters at all, this is on Windows XP 32b.

    Read the article

  • Have a set a cgi scripts shared by multiple domains

    - by rpat
    Goal: Have multiple domains share a set of cgi(perl) scripts Environment: Apache 2.0 on a dedicated Cent OS server. (Apache configuration files generated by cPanel) I have dozens of domains on the dedicated server. The domains set up by cPanel under VirtualHost section. I have almost no knowledge of Apache. Most of what I do is taken care of by cPanel. I would like to put a set of scripts under one directory (perhaps under / or /opt ) and for each of the domains, under the individual cgi-bin, I would like to create a symbolic link to this common directory. This way I am hoping to avoid having to keep a copy of scripts for every domain. Since Apache config files are generated by cPanel, I would not like to manually make changes to those. Beside, I could mess things up. I see that cPanel recommends use of include files rather than changing the httpd.conf Perhaps I need to have the following of symbolic links enabled in the cgi-bin directory and allow the web server user execute the scripts not owned by it. May be I am making things more complicated than they are. I would be glad to use any other means to achieve my goal. Thanks in advance for your help. *I asked this on stackoverflow and some one suggested that I could ask this on serverfault.

    Read the article

  • Are there any 17-20 inch monitors that support displayport?

    - by WildJoe
    I've got dual monitors now (both 20 inch 1600x1200). After seeing the new eyefinity cards out there (and reading the CodingHorror post on three monitors) I've decided to get a third. It's time to upgrade my video card anyway. Since I don't already have a third monitor and will be buying one new, I figure it'd make sense to buy one that already had a DisplayPort interface so as to avoid the adapter issue. However, I can't seem to find any monitors on newegg that support this (it's not even an option in the power search, and a keyword search turned up only adapters and video cards). A quick google showed me several 30 inchers (like Dell's, but that's way too expensive, and I don't have that much room on my desk even if I had that money) and some 22 inch models. Again, I'm looking for a 17-20 inch with a DisplayPort interface built in. Any suggestions?

    Read the article

  • Why do people like widescreen when it is, de facto, less space?

    - by Kerry
    I find that many of my friends/non-programmers or designers like widescreens. It makes very little sense to me as you in fact have less space than a 4:3 (do the math). The closer to a perfect square the more space you actually have on your screen. I got a 21" 16:9 and two 19" 4:3 The 21" is nearly the same height, but I think its a tenth of an inch shorter if I'm correct. I forget the calculation but it is nearly the same actual space. I can understand if you're using your computer for constant movie-watching but I think that's more of people's "ideal" than a reality. Thoughts?

    Read the article

  • How to disable monitor auto detection in Windows 7?

    - by Jay Yother
    I am currently running Windows 7 Ultimate 64-bit with a dual monitor setup with an NVIDIA 7950 GT graphics card. One monitor is dedicated to this machine and the other monitor is connected to a DVI KVM switch. When I switch to my other computer, Windows 7 disables the monitor. However, when I switch back it does not re-enable the monitor. The only circumstance that automatically re-enables the second monitor is when I switch back after Windows has put the monitors into power save mode. I am continually having to bring up the NVIDIA control panel to have it re-enable the monitor. Under Windows XP I would just disable the NVIDIA service to prevent it from auto-detecting the monitor (which doesn't solve the problem under Win7), and in Vista there was a registry hack that would prevent this. It looks as though that has been removed in Windows 7. I have found similar questions posted on this site, but nothing that matches my problem exactly. The following link is the question that comes the closest, but does not provide a solution to the problem. http://superuser.com/questions/96683/how-to-fix-monitor-detection-on-windows-7 Is there a way in Windows 7 to disable monitor auto-detection? Update: I just added a second graphics card to my Windows 7 64-bit machine. I plugged one monitor into each graphics card. Now, when I use the KVM switch to switch back and forth it will re-enable the second monitor like it should. There are however, a few quirks with this. If I have a program maximized on the second monitor and it has focus, when I switch it will move to monitor 1. If I have a program maximized on the second monitor and it does not have focus, when I switch it will behave like it is minimized and when I bring it back up it will show up maximized on monitor 1. Definitely better than it was, but still looking for a way to disable the auto-detection.

    Read the article

  • three monitors with radeon 5870 on 1920x 1080

    - by antoniocs
    Hey! I have 3 monitors, 2 24 inch and one 22 inch. The max resolution of the 24 inch monitors is 1920 x 1080 and the 22 is a bit less (can't remember right now). I read Jeff's post about the display port adapters and I was wondering if passive adapter would do the trick since neither of the monitors have big resolutions. Thanks

    Read the article

  • Triple monitor setup in linux

    - by Brendan Abel
    I'm hoping there are some xorg gurus out there. I'm trying to get a three monitor setup working in linux. I have 2 lcd monitors and a tv, all different resolutions. I'm using 2 video cards; a 9800 GTX and 7900Gt. I've seen a lot of different posts about people trying to make this work, and in every case, they either gave up, or Xinerama magically solved all their problems. Basically, my main problem is that I cannot get Xinerama to work. Every time I turn it on in the options, my machine gets stuck in a neverending boot cycle. If I disable Xinerama, I just have three Xorg screens, but I can't drag windows from one to the other. I can get the 2 lcds on Twinview, and the tv on a separate Xorg screen no problem. But I don't really like this solution. I'd rather have them all on separate screens and stitch them together with Xinerama. Has anyone done this? Here's my xorg.conf for reference. p.s. This took me all of 30 seconds to set up in Windows XP! p.s.s. I've seen somewhere that maybe randr can solve my problems? But I'm not quite sure how? Section "Monitor" Identifier "Main1" VendorName "Acer" ModelName "H233H" HorizSync 40-70 VertRefresh 60 Option "dpms" EndSection #Section "Monitor" # Identifier "Main2" # VendorName "Acer" # ModelName "AL2216W" # HorizSync 40-70 # VertRefresh 60 # Option "dpms" #EndSection Section "Monitor" Identifier "Projector" VendorName "BenQ" ModelName "W500" HorizSync 44.955-45 VertRefresh 59.94-60 Option "dpms" EndSection Section "Device" Identifier "Card1" Driver "nvidia" VendorName "nvidia" BusID "PCI:5:0:0" BoardName "nVidia Corporation G92 [GeForce 9800 GTX+]" Option "ConnectedMonitor" "DFP,DFP" Option "NvAGP" "0" Option "NoLogo" "True" #Option "TVStandard" "HD720p" EndSection Section "Device" Identifier "Card2" Driver "nvidia" VendorName "nvidia" BusID "PCI:4:0:0" BoardName "nVidia Corporation G71 [GeForce 7900 GT/GTO]" Option "NvAGP" "0" Option "NoLogo" "True" Option "TVStandard" "HD720p" EndSection Section "Module" Load "glx" EndSection Section "Screen" Identifier "ScreenMain-0" Device "Card1-0" Monitor "Main1" DefaultDepth 24 Option "Twinview" Option "TwinViewOrientation" "RightOf" Option "MetaModes" "DFP-0: 1920x1080; DFP-1: 1680x1050" Option "HorizSync" "DFP-0: 40-70; DFP-1: 40-70" Option "VertRefresh" "DFP-0: 60; DFP-1: 60" #SubSection "Display" # Depth 24 # Virtual 4880 1080 #EndSubSection EndSection Section "Screen" Identifier "ScreenProjector" Device "Card2" Monitor "Projector" DefaultDepth 24 Option "MetaModes" "TV-0: 1280x720" Option "HorizSync" "TV-0: 44.955-45" Option "VertRefresh" "TV-0: 59.94-60" EndSection Section "ServerLayout" Identifier "BothTwinView" Screen "ScreenMain-0" Screen "ScreenProjector" LeftOf "ScreenMain-0" #Option "Xinerama" "on" # most important option let you window expand to three monitors EndSection

    Read the article

  • How do I move an Amazon micro instance to a small instance?

    - by Navetz
    I want to move my instance to a micro instance to a small instance but when I try to launch a new AMI based on my Micro instance AMI it only gives me the option for 64 bit instances. My initial ami is based off an ubuntu 10.04 image. Is it not possible to move between 64 bit and 32 bit instance? Would it be possible to use a load balancer to have a 32bit instance and a 64bit instance work together? I have a website/web app that I will be uploading huge volumes of data to. I will be starting with 65gigs of images and then moving up to 100+ gigs of images. I am not sure which instance type would be best for this. I was going to use a load balancer and auto scaling to increase the number of instance when the load is high. Also when using a load balancer, does one of the AMI instance become the primary image and the rest act as clones of it?

    Read the article

  • Setting up a copy of a site with IIS 7?

    - by SJaguar13
    I have a site running on IIS with a dyndns.org domain that points to the IP of the Windows 2008 machine hosting it. I need a copy of that site for development purposes. I set up another folder with all the files, and create a new site in IIS. I don't really have a domain for it, so I was just going to use the IP address. When I go to localhost, 127.0.0.1, or the internal IP, I get bad hostname. If I use the IP address on port 80 (the same as the real version of the site), I get 404 not found. If I use a different port so I don't have them both on the same IP with the same port, I get connection timed out. How do I go about setting this up?

    Read the article

  • IIS6 can't find site on local network

    - by chezy525
    I have a windows 2003 server with dual NICs running IIS6. I can access everything remotely, but the internal network can't seem to find the site regardless of which IP Address I try to go to. There are really several weird things that are happening here, but I'm going to limit this question to what I'm guessing to be the simplest problem (the solution to which I'm hoping solves other things as well): From the server itself, I can access the webpage using the primary IP address (i.e. http://192.168.1.2/index.htm), but not using the secondary IP address (i.e. http://10.10.10.2/index.htm). Self pinging both IP addresses works, and the "Web site identification" in IIS has the IP address set to "(All Unassigned)"... which I believe should bind both IP addresses to this site. I apologize if I'm not providing enough details about my setup, but at this point I don't even know what's relevant...

    Read the article

  • Can I get 4 screens running on an ATI Radeon HD 5700 series video card?

    - by Wayne
    I have successfully run 3 displays using the 5700, but i want to run a 4th screen off the HDMI Port. Mainly I would like it to Mirror the primary monitor onto the TV connected to the HDMI Port. Any help at all would be greatly appreciated. I can get a signal to it, i just have to disable one of my original 3 monitors. Im not willing to do that. So other than disabling one of my monitors, does anyone have any suggestions?

    Read the article

  • How to switch off the monitor when mouse reaches the edge of the screen?

    - by evgeny9
    I have 2 computers at home (Windows XP and Windows 7), but one monitor for both of them. They are connected to this monitor using different interfaces: DVI and VGA. I'm also using one keyboard and one mouse to control both PCs with the help of Synergy or Input Director. But I still need to manually switch between monitor interfaces. I wonder, if there's some way (software) that will switch this interfaces (turn off the monitor), when reach the edge of the screen with the mouse. Until now I found several answers, which help to avoid pressing hardware buttons, but still can not do the job automatically based on mouse pointer coordinates. Thank you.

    Read the article

  • How to move mail accounts when migrating webhosting

    - by pkswatch
    I am migrating my website abc.com from one webhosting company to another in a shared hosting environment. Both have cpanel. And the second hosting account i am preparing to move is my multi-domain hosting account with 3 domains already in it. The problem is, i have many email accounts associated with my website abc.com, which are accessed using webmail. So if i move it to the other host, will i lose all those accounts and their emails? If yes, then how should i synchronise the email accounts so that all the accounts and the contained emails remain intact? I saw some several sync tools like IMAP Sync, etc. But these require two hosts while synchronizing, and as you see, i have just one domain name to be synchronized over 2 servers. PS, i do not have any ssh access on either of them, and i have made complete backup of all files using backup wizard in cpanel.

    Read the article

  • Xinerama 3 displays can't have main display in the middle

    - by mononym
    I have 3 monitors running on 2 cards, they are all working as 3 seperate displays, however, if i move the main display from the left (0,0) i cannot drag to the left window as the mouse goes crazy and crashes my system (i have to restart x) I would much prefer my main display to be in the centre. Any help appreciated

    Read the article

  • How can use mod_rewrite to redirect a multiple specific URLs containing multiple query strings?

    - by Derek
    Hi there folks, we recently migrated a site from a custom CMS to drupal. In an effort to preserve some links that our users bookmarked (we have about 120 redirects) we would like to forward the original URLs to a new URL. I have been searching for a couple days, but can't seem to find anything simple to what I need. We have existing URLS that contain one or more query strings, for example: /article.php?issue_id=12&article_id=275 and we would like to forward to the new location: http://foobar.edu/content/super-happy-fun-article I started using: RewriteEngine On RewriteRule ^/article\.php?issue_id=12&article_id=275$ http://foobar.edu/content/super-happy-fun-article [R=301,L] This, however, does not work. A simple RewriteRule works: RewriteRule ^test\.php$ index.php It is unclear to me how I need to use {QUERY_STRING} with multiple Basically it's 120 simple redirects that go from one existing URL to a new one. I don't need ranges [0-9], because there is no sequential order to existing URLs. Perhaps I can do what I need with RewriteMap and a simple text file that contains a line like this: index.php?issue_id=12&articleType_section=0&articleType_id=65 http://foobar.edu/category/fall-2008 If anyone has any idea on using mod_rewrite to accomplish this or if there is a better, or more simple mod, I am open to that as well. Thanks!

    Read the article

  • Both screens always stay on after adding second monitor

    - by J.Merrill
    I had a single 1920x1080 monitor on a Windows 7 desktop PC and, per "power management" (not screen saver), the screen would go blank after 10 minutes. I added another monitor (2560x1600 if that matters) and since then, neither screen has ever blanked. I've tried turning on the "blank" screen saver, but that didn't help either -- I can go away for hours and when I come back, both screens are on. I've seen others with similar issues apparently caused by e.g. wireless mice that seem to move infinitesimally, but I've got the same wired mouse I had before. I can't understand why neither the screen saver nor power management is doing what it should to blank the screens, when "power management" used to do it when there was only one monitor. Maybe it doesn't matter so much with current LCD display technology (no "burn in") but doesn't a monitor use more power when "power management" hasn't turned off the display? Thanks for any suggestions.

    Read the article

  • How to get monitor resolution of 1680x1050 using ATI Radeon HD 2600 PRO in a dual monitor setup

    - by user7651
    I have Sapphire ATI Radeon HD 2600 PRO graphics card in my Windows Server 2008 x64 machine. It has two outputs a VGA and a DVI. I have connected the DVI to my Dell 24" monitor with 1900x1200 resolution and it works 100%. The VGA I have connected to my second monitor a Samsung 22" with native resolution of 1680x1050. But the ATI driver and Catalyst control centre doesn't show this resolution as an option. If I choose a lower resolution like 1280x1024 it looks really bad and fuzzy. I searched in google and downloaded the powerstrip tool that allowed me to create a custom resolution of 1680x1050 and then this option shows up in Catalyst control centre and my 2nd monitor works fine now. But I don't want to pay for an application to choose a display resolution. Why doesn't ATI show me that option by default even though it has no problem in actually supporting the display at resolution. Is there a way to get 1680x1050 resolution using ATI drivers only ?

    Read the article

  • DIrect videos and slideshows fullscreen from another display

    - by neurino
    I have 3 displays: 1 control display I can see 2 40" Full HD displays I can't see my need is to play videos and presentations fullscreen on the two 40" screens while being able to control them from the control display. So far I am able to achieve this with a cumbersome set of keyboard shortcuts like: open VLC on control display send to left display with Win + Shift + Left go fullscreen with f and more combinations to restore, get VLC on control display etc. This is really error prone and not professional. Also I wish I have a media player and a slideshow player that can: send the same video / slideshow to the two 40" displays at the same time send two different videos / slideshows, one each 40" display having all controls on the central display, the only one I can see. Any advice welcome, thank you for your support.

    Read the article

  • Windows 7, how to get unlock (Press Ctrl+Alt+del) prompt on all monitors?

    - by Zugwalt
    I have a laptop that I keep shut in a docking station as I have two screens connected to the laptop and it cannot display to both of those AND its own screen. However, when my computer locks by itself (Not when I lock it using Ctrl+Alt+Del) the login prompt is ONLY on it screen (at least its there when I open it up) and my primary external monitor is off and my other one is all black. This means to log in I have to hit Ctrl+Alt+Del and blindly enter my password--which I don't mind too much, but would prefer if I could actually see the unlock/login prompt instead of typing on a black screen. Any way to have it show the login prompt on all monitors?

    Read the article

  • Third monitor with AMD cards WITHOUT Eyefinity

    - by Resorath
    I have two AMD Radeon HD 6870 video cards in CrossFireX configuration and I would like to add a third monitor. I understand to use "Eyefinity" you need to use an active mini displayport to DVI adapter. I am not interested in the benefits of "Eyefinity", I just want a third monitor with Windows extended desktop. Is it possible to use either the HDMI head on the first card or the DVI heads from the second card to get a third monitor running without "Eyefinity" and an active adapter?

    Read the article

  • How can I get mouse capture to work in virtualbox when I move guest window to second monitor?

    - by Dan
    I'm running VirtualBox on a Win7 host. Guest OS is Centos. My setup is a laptop (screen 1) with a huge external monitor (screen 2). I'm only telling Centos there is one monitor though. When I start up VirtualBox on screen 1, the mouse capture works fine. I don't have mouse integration because (I think) the kernel on Centos is too old to support it. That's fine, I don't mind doing the Right-Control thing. The problem I have is that when I drag the whole VM window over to my second monitor, the mouse capture doesn't work right anymore. I click inside the VM and can move the VM cursor a little bit, but I can't always get to the edges of the VM screen -- before I get all the way to an edge, the cursor will escape from the VM as if I had hit right-control. But it's still captured according to the icon, and if I then hit right-control, the guest cursor jumps to a different screen location. My workaround: if I have the VM window mostly on screen 2, but a small corner of it still on screen 1, then the mouse capture works correctly. Is there a setting to make this work better?

    Read the article

< Previous Page | 80 81 82 83 84 85 86 87 88 89 90 91  | Next Page >