Search Results

Search found 2671 results on 107 pages for '2 6 35'.

Page 86/107 | < Previous Page | 82 83 84 85 86 87 88 89 90 91 92 93  | Next Page >

  • Swap partition not recognized (The disk drive with UUID=... is not ready yet or not present)

    - by ladaghini
    I think I had an encrypted swap partition, because I chose to encrypt my home directory during the installation. I believe that's what the line with /dev/mapper/cryptswap1 ... in my /etc/fstab is all about. I did something to bork my swap because on the next boot, I got a message (paraphrased): The disk drive for /dev/mapper/cryptswap1 is not ready yet or not present. Wait to continue. Press S to skip or M to manually recover. (As a side note, pressing S or M seemed to do nothing different from just waiting.) Here's what I've tried: This tutorial on how to fix the swap partition not mounting. However, in the above, the mkswap command fails because the device is busy. So I booted from a live USB, ran GParted to reformat the swap partition (which showed up as an unknown fs type), and chrooted into the broken system to try that tutorial again. I also adjusted /etc/initramfs-tools/conf.d/resume and /etc/fstab to reflect the new UUID generated from formatting the partition as a swap. That still didn't work; instead of /dev/mapper/cryptswap1 not present, "The disk drive with UUID=[swap partition's UUID] is not ready yet or not present..." So I decided to start afresh as though I never had created a swap partition in the first place. From the Live USB, I deleted the swap partition altogether (which, again showed up in GParted as an unknown fs type), removed the swap and cryptswap entries in /etc/fstab as well as removed /etc/initramfs-tools/conf.d/resume and /etc/crypttab. At this point the main system shouldn't be considered broken because there is no swap partition and no instructions to mount one, right? I didn't get any errors during startup. I followed the same instructions to create and encrypt the swap partition, starting with creating a partition for the swap, though I think fdisk said a reboot was necessary to see changes. I was confident the 3rd process above would work, but the problem yet persists. Some relevant info (/dev/sda8 is the swap partition): /etc/fstab file: # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda6 during installation UUID=4c11e82c-5fe9-49d5-92d9-cdaa6865c991 / ext4 errors=remount-ro 0 1 # /boot was on /dev/sda5 during installation UUID=4031413e-e89f-49a9-b54c-e887286bb15e /boot ext4 defaults 0 2 # /home was on /dev/sda7 during installation UUID=d5bbfc6f-482a-464e-9f26-fd213230ae84 /home ext4 defaults 0 2 # swap was on /dev/sda8 during installation UUID=5da2c720-8787-4332-9317-7d96cf1e9b80 none swap sw 0 0 /dev/mapper/cryptswap1 none swap sw 0 0 output of sudo mount: /dev/sda6 on / type ext4 (rw,errors=remount-ro) proc on /proc type proc (rw,noexec,nosuid,nodev) sysfs on /sys type sysfs (rw,noexec,nosuid,nodev) none on /sys/fs/fuse/connections type fusectl (rw) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) udev on /dev type devtmpfs (rw,mode=0755) devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755) none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880) none on /run/shm type tmpfs (rw,nosuid,nodev) /dev/sda5 on /boot type ext4 (rw) /dev/sda7 on /home type ext4 (rw) /home/undisclosed/.Private on /home/undisclosed type ecryptfs (ecryptfs_check_dev_ruid,ecryptfs_cipher=aes,ecryptfs_key_bytes=16,ecryptfs_unlink_sigs,ecryptfs_sig=cbae1771abd34009,ecryptfs_fnek_sig=7cefe2f59aab8e58) gvfs-fuse-daemon on /home/undisclosed/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=undisclosed) output of sudo blkid (note that /dev/sda8 is missing): /dev/sda1: LABEL="SYSTEM" UUID="960490E80490CC9D" TYPE="ntfs" /dev/sda2: UUID="D4043140043126C0" TYPE="ntfs" /dev/sda3: LABEL="Shared" UUID="80F613E1F613D5EE" TYPE="ntfs" /dev/sda5: UUID="4031413e-e89f-49a9-b54c-e887286bb15e" TYPE="ext4" /dev/sda6: UUID="4c11e82c-5fe9-49d5-92d9-cdaa6865c991" TYPE="ext4" /dev/sda7: UUID="d5bbfc6f-482a-464e-9f26-fd213230ae84" TYPE="ext4" /dev/mapper/cryptswap1: UUID="41fa147a-3e2c-4e61-b29b-3f240fffbba0" TYPE="swap" output of sudo fdisk -l: Disk /dev/mapper/cryptswap1 doesn't contain a valid partition table Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xdec3fed2 Device Boot Start End Blocks Id System /dev/sda1 * 2048 409599 203776 7 HPFS/NTFS/exFAT /dev/sda2 409600 210135039 104862720 7 HPFS/NTFS/exFAT /dev/sda3 210135040 415422463 102643712 7 HPFS/NTFS/exFAT /dev/sda4 415424510 625141759 104858625 5 Extended /dev/sda5 415424512 415922175 248832 83 Linux /dev/sda6 415924224 515921919 49998848 83 Linux /dev/sda7 515923968 621389823 52732928 83 Linux /dev/sda8 621391872 625141759 1874944 82 Linux swap / Solaris Disk /dev/mapper/cryptswap1: 1919 MB, 1919942656 bytes 255 heads, 63 sectors/track, 233 cylinders, total 3749888 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xaf5321b5 /etc/initramfs-tools/conf.d/resume file: RESUME=UUID=5da2c720-8787-4332-9317-7d96cf1e9b80 /etc/crypttab file: cryptswap1 /dev/sda8 /dev/urandom swap,cipher=aes-cbc-essiv:sha256 output of sudo swapon -as: Filename Type Size Used Priority /dev/mapper/cryptswap1 partition 1874940 0 -1 output of sudo free -m: total used free shared buffers cached Mem: 1476 1296 179 0 35 671 -/+ buffers/cache: 590 886 Swap: 1830 0 1830 So, how can this be fixed?

    Read the article

  • Can not print after upgrading from 12.x to 14.04

    - by user318889
    After upgrading from V12.04 to V14.04 I am not able to print. I am using an HP LaserJet 400 M451dn. The printer troubleshooter told me that there is no solution to the problem. This is the output of the advanced diagnositc output. (Due to limited space I cut the output!) Can anybody tell me what is going wrong. I am using the printer via USB ? Page 1 (Scheduler not running?): {'cups_connection_failure': False} Page 2 (Is local server publishing?): {'local_server_exporting_printers': False} Page 3 (Choose printer): {'cups_dest': , 'cups_instance': None, 'cups_queue': u'HP-LaserJet-400-color-M451dn', 'cups_queue_listed': True} Page 4 (Check printer sanity): {'cups_device_uri_scheme': u'hp', 'cups_printer_dict': {'device-uri': u'hp:/usb/HP_LaserJet_400_color_M451dn?serial=CNFF308670', 'printer-info': u'Hewlett-Packard HP LaserJet 400 color M451dn', 'printer-is-shared': True, 'printer-location': u'Pinatubo', 'printer-make-and-model': u'HP LJ 300-400 color M351-M451 Postscript (recommended)', 'printer-state': 4, 'printer-state-message': u'', 'printer-state-reasons': [u'none'], 'printer-type': 8556636, 'printer-uri-supported': u'ipp://localhost:631/printers/HP-LaserJet-400-color-M451dn'}, 'cups_printer_remote': False, 'hplip_output': (['', '\x1b[01mHP Linux Imaging and Printing System (ver. 3.14.6)\x1b[0m', '\x1b[01mDevice Information Utility ver. 5.2\x1b[0m', '', 'Copyright (c) 2001-13 Hewlett-Packard Development Company, LP', 'This software comes with ABSOLUTELY NO WARRANTY.', 'This is free software, and you are welcome to distribute it', 'under certain conditions. See COPYING file for more details.', '', '', '\x1b[01mhp:/usb/HP_LaserJet_400_color_M451dn?serial=CNFF308670\x1b[0m', '', '\x1b[01mDevice Parameters (dynamic data):\x1b[0m', '\x1b[01m Parameter Value(s) \x1b[0m', ' ---------------------------- ----------------------------------------------------------', ' back-end hp ', " cups-printers ['HP-LaserJet-400-color-M451dn'] ", ' cups-uri hp:/usb/HP_LaserJet_400_color_M451dn?serial=CNFF308670 ', ' dev-file ', ' device-state -1 ', ' device-uri hp:/usb/HP_LaserJet_400_color_M451dn?serial=CNFF308670 ', ' deviceid ', ' error-state 101 ', ' host ', ' is-hp True ', ' panel 0 ', ' panel-line1 ', ' panel-line2 ', ' port 1 ', ' serial CNFF308670 ', ' status-code 5002 ', ' status-desc ', '\x1b[01m', 'Model Parameters (static data):\x1b[0m', '\x1b[01m Parameter Value(s) \x1b[0m', ' ---------------------------- ----------------------------------------------------------', ' align-type 0 ', ' clean-type 0 ', ' color-cal-type 0 ', ' copy-type 0 ', ' embedded-server-type 0 ', ' fax-type 0 ', ' fw-download False ', ' icon hp_color_laserjet_cp2025.png ', ' io-mfp-mode 1 ', ' io-mode 1 ', ' io-support 6 ', ' job-storage 0 ', ' linefeed-cal-type 0 ', ' model HP_LaserJet_400_color_M451dn ', ' model-ui HP LaserJet 400 Color m451dn ', ' model1 HP LaserJet 400 Color M451dn ', ' monitor-type 0 ', ' panel-check-type 0 ', ' pcard-type 0 ', ' plugin 0 ', ' plugin-reason 0 ', ' power-settings 0 ', ' ppd-name lj_300_400_color_m351_m451 ', ' pq-diag-type 0 ', ' r-type 0 ', ' r0-agent1-kind 4 ', ' r0-agent1-sku CE410A/CE410X ', ' r0-agent1-type 1 ', ' r0-agent2-kind 4 ', ' r0-agent2-sku CE411A ', ' r0-agent2-type 4 ', ' r0-agent3-kind 4 ', ' r0-agent3-sku CE413A ', ' r0-agent3-type 5 ', ' r0-agent4-kind 4 ', ' r0-agent4-sku CE412A ', ' r0-agent4-type 6 ', ' scan-src 0 ', ' scan-type 0 ', ' status-battery-check 0 ', ' status-dynamic-counters 0 ', ' status-type 3 ', ' support-released True ', ' support-subtype 2202411 ', ' support-type 2 ', ' support-ver 3.12.2 ', " tech-class ['Postscript'] ", " tech-subclass ['Normal'] ", ' tech-type 4 ', ' usb-pid 3882 ', ' usb-vid 1008 ', ' wifi-config 0 ', '\x1b[01m', 'Status History (most recent first):\x1b[0m', '\x1b[01m Date/Time Code Status Description User Job ID \x1b[0m', ' -------------------- ----- ---------------------------------------- -------- --------', ' 08/21/14 00:07:25 5012 Device communication error richard 0 ', ' 08/20/14 13:42:44 500 Started a print job richard 4214 ', '', '', 'Done.', ''], ['\x1b[35;01mwarning: No display found.\x1b[0m', '\x1b[31;01merror: hp-info -u/--gui requires Qt4 GUI support. Entering interactive mode.\x1b[0m', '\x1b[31;01merror: Unable to communicate with device (code=12): hp:/usb/HP_LaserJet_400_color_M451dn?serial=CNFF308670\x1b[0m', '\x1b[31;01merror: Error opening device (Device not found).\x1b[0m', ''], 0), 'is_cups_class': False, 'local_cups_queue_attributes': {'charset-configured': u'utf-8', 'charset-supported': [u'us-ascii', u'utf-8'], 'color-supported': True, 'compression-supported': [u'none', u'gzip'], 'copies-default': 1, 'copies-supported': (1, 9999), 'cups-version': u'1.7.2', 'device-uri': u'hp:/usb/HP_LaserJet_400_color_M451dn?serial=CNFF308670', 'document-format-default': u'application/octet-stream', 'document-format-supported': [u'application/octet-stream', u'application/pdf', u'application/postscript', u'application/vnd.adobe-reader-postscript', u'application/vnd.cups-command', u'application/vnd.cups-pdf', u'application/vnd.cups-pdf-banner', u'application/vnd.cups-postscript', u'application/vnd.cups-raw', u'application/vnd.samsung-ps', u'application/x-cshell', u'application/x-csource', u'application/x-perl', u'application/x-shell', u'image/gif', u'image/jpeg', u'image/png', u'image/tiff', u'image/urf', u'image/x-bitmap', u'image/x-photocd', u'image/x-portable-anymap', u'image/x-portable-bitmap', u'image/x-portable-graymap', u'image/x-portable-pixmap', u'image/x-sgi-rgb', u'image/x-sun-raster', u'image/x-xbitmap', u'image/x-xpixmap', u'image/x-xwindowdump', u'text/css', u'text/html', u'text/plain'], 'finishings-default': 3, 'finishings-supported': [3], 'generated-natural-language-supported': [u'en-us'], 'ipp-versions-supported': [u'1.0', u'1.1', u'2.0', u'2.1'], 'ippget-event-life': 15, 'job-creation-attributes-supported': [u'copies', u'finishings', u'ipp-attribute-fidelity', u'job-hold-until', u'job-name', u'job-priority', u'job-sheets', u'media', u'media-col', u'multiple-document-handling', u'number-up', u'output-bin', u'orientation-requested', u'page-ranges', u'print-color-mode', u'print-quality', u'printer-resolution', u'sides'], 'job-hold-until-default': u'no-hold', 'job-hold-until-supported': [u'no-hold', u'indefinite', u'day-time', u'evening', u'night', u'second-shift', u'third-shift', u'weekend'], 'job-ids-supported': True, 'job-k-limit': 0, 'job-k-octets-supported': (0, 470914416), 'job-page-limit': 0, 'job-priority-default': 50, 'job-priority-supported': [100], 'job-quota-period': 0, 'job-settable-attributes-supported': [u'copies', u'finishings', u'job-hold-until', u'job-name', u'job-priority', u'media', u'media-col', u'multiple-document-handling', u'number-up', u'output-bin', u'orientation-requested', u'page-ranges', u'print-color-mode', u'print-quality', u'printer-resolution', u'sides'], 'job-sheets-default': (u'none', u'none'), 'job-sheets-supported': [u'none', u'classified', u'confidential', u'form', u'secret', u'standard', u'topsecret', u'unclassified'], 'jpeg-k-octets-supported': (0, 470914416), 'jpeg-x-dimension-supported': (0, 65535), 'jpeg-y-dimension-supported': (1, 65535), 'marker-change-time': 0, 'media-bottom-margin-supported': [423], 'media-col-default': u'(unknown IPP value tag 0x34)', 'media-col-supported': [u'media-bottom-margin', u'media-left-margin', u'media-right-margin', u'media-size', u'media-source', u'media-top-margin', u'media-type'], 'media-default': u'iso_a4_210x297mm', 'media-left-margin-supported': [423], 'media-right-margin-supported': [423],

    Read the article

  • In Social Relationship Management, the Spirit is Willing, but Execution is Weak

    - by Mike Stiles
    In our final talk in this series with Aberdeen’s Trip Kucera, we wanted to find out if enterprise organizations are actually doing anything about what they’re learning around the importance of communicating via social and using social listening for a deeper understanding of customers and prospects. We found out that if your brand is lagging behind, you’re not alone. Spotlight: How was Aberdeen able to find out if companies are putting their money where their mouth is when it comes to implementing social across the enterprise? Trip: One way to think about the relative challenges a business has in a given area is to look at the gap between “say” and “do.” The first of those words reveals the brand’s priorities, while the second reveals their ability to execute on those priorities. In Aberdeen’s research, we capture this by asking firms to rank the value of a set of activities from one on the low end to five on the high end. We then ask them to rank their ability to execute those same activities, again on a one to five, not effective to highly effective scale. Spotlight: And once you get their self-assessments, what is it you’re looking for? Trip: There are two things we’re looking for in this analysis. The first is we want to be able to identify the widest gaps between perception of value and execution. This suggests impediments to adoption or simply a high level of challenge, be it technical or otherwise. It may also suggest areas where we can expect future investment and innovation. Spotlight: So the biggest potential pain points surface, places where they know something is critical but also know they aren’t doing much about it. What’s the second thing you look for? Trip: The second thing we want to do is look at specific areas in which high-performing companies, the Leaders, are out-executing the Followers. This points to the business impact of these activities since Leaders are defined by a set of business performance metrics. Put another way, we’re correlating adoption of specific business competencies with performance, looking for what high-performers do differently. Spotlight: Ah ha, that tells us what steps the winners are taking that are making them winners. So what did you find out? Trip: Generally speaking, we see something of a glass curtain when it comes to the social relationship management execution gap. There isn’t a single social media activity in which more than 50% of respondents indicated effectiveness, which would be a 4 or 5 on that 1-5 scale. This despite the fact that 70% of firms indicate that generating positive social media mentions is valuable or very valuable, a 4 or 5 on our 1-5 scale. Spotlight: Well at least they get points for being honest. The verdict they’re giving themselves is that they just aren’t cutting it in these highly critical social development areas. Trip: And the widest gap is around directly engaging with customers and/or prospects on social networks, which 69% of firms rated as valuable but only 34% of companies say they are executing well. Perhaps even more interesting is that these two are interdependent since you’re most likely to generate goodwill on social through happy, engaged customers. This data also suggests that social is largely being used as a broadcast channel rather than for one-to-one engagement. As we’ve discussed previously, social is an inherently personal media. Spotlight: And if they’re still using it as a broadcast channel, that shows they still fail to understand the root of social and see it as just another outlet for their ads and push-messaging. That’s depressing. Trip: A second way to evaluate this data is by using Aberdeen’s performance benchmarking. The story is both a bit different, but consistent in its own way. The first thing we notice is that Leaders are more effective in their execution of several key social relationship management capabilities, namely generating positive mentions and engaging with “influencers” and customers. Based on the fact that Aberdeen uses a broad set of performance metrics to rank the respondents as either “Leaders” (top 35% in weighted performance) or “Followers” (bottom 65% in weighted performance), from website conversion to annual revenue growth, we can then correlated high social effectiveness with company performance. We can also connect the specific social capabilities used by Leaders with effectiveness. We spoke about a few of those key capabilities last time and also discuss them in a new report: Social Powers Activate: Engineering Social Engagement to Win the Hidden Sales Cycle. Spotlight: What all that tells me is there are rewards for making the effort and getting it right. That’s how you become a Leader. Trip: But there’s another part of the story, which is that overall effectiveness, even among Leaders, is muted. There’s just one activity in which more than a majority of Leaders cite high effectiveness, effectiveness being the generation of positive buzz. While 80% of Leaders indicate “directly engaging with customers” through social media channels is valuable, the highest rated activity among Leaders, only 42% say they’re effective. This gap even among Leaders shows the challenges still involved in effective social relationship management. @mikestilesPhoto: stock.xchng

    Read the article

  • Texture and Lighting Issue in 3D world

    - by noah
    Im using OpenGL ES 1.1 for iPhone. I'm attempting to implement a skybox in my 3d world and started out by following one of Jeff Lamarches tutorials on creating textures. Heres the tutorial: iphonedevelopment.blogspot.com/2009/05/opengl-es-from-ground-up-part-6_25.html Ive successfully added the image to my 3d world but am not sure why the lighting on the other shapes has changed so much. I want the shapes to be the original color and have the image in the background. Before: https://www.dropbox.com/s/ojmb8793vj514h0/Screen%20Shot%202012-10-01%20at%205.34.44%20PM.png After: https://www.dropbox.com/s/8v6yvur8amgudia/Screen%20Shot%202012-10-01%20at%205.35.31%20PM.png Heres the init OpenGL: - (void)initOpenGLES1 { glShadeModel(GL_SMOOTH); // Enable lighting glEnable(GL_LIGHTING); // Turn the first light on glEnable(GL_LIGHT0); const GLfloat lightAmbient[] = {0.2, 0.2, 0.2, 1.0}; const GLfloat lightDiffuse[] = {0.8, 0.8, 0.8, 1.0}; const GLfloat matAmbient[] = {0.3, 0.3, 0.3, 0.5}; const GLfloat matDiffuse[] = {1.0, 1.0, 1.0, 1.0}; const GLfloat matSpecular[] = {1.0, 1.0, 1.0, 1.0}; const GLfloat lightPosition[] = {0.0, 0.0, 1.0, 0.0}; const GLfloat lightShininess = 100.0; //Configure OpenGL lighting glEnable(GL_LIGHTING); glEnable(GL_LIGHT0); glMaterialfv(GL_FRONT_AND_BACK, GL_AMBIENT, matAmbient); glMaterialfv(GL_FRONT_AND_BACK, GL_DIFFUSE, matDiffuse); glMaterialfv(GL_FRONT_AND_BACK, GL_SPECULAR, matSpecular); glMaterialf(GL_FRONT_AND_BACK, GL_SHININESS, lightShininess); glLightfv(GL_LIGHT0, GL_AMBIENT, lightAmbient); glLightfv(GL_LIGHT0, GL_DIFFUSE, lightDiffuse); glLightfv(GL_LIGHT0, GL_POSITION, lightPosition); // Define a cutoff angle glLightf(GL_LIGHT0, GL_SPOT_CUTOFF, 40.0); // Set the clear color glClearColor(0, 0, 0, 1.0f); // Projection Matrix config glMatrixMode(GL_PROJECTION); glLoadIdentity(); CGSize layerSize = self.view.layer.frame.size; // Swapped height and width for landscape mode gluPerspective(45.0f, (GLfloat)layerSize.height / (GLfloat)layerSize.width, 0.1f, 750.0f); [self initSkyBox]; // Modelview Matrix config glMatrixMode(GL_MODELVIEW); glLoadIdentity(); // This next line is not really needed as it is the default for OpenGL ES glTexEnvi(GL_TEXTURE_ENV, GL_TEXTURE_ENV_MODE, GL_MODULATE); glBlendFunc(GL_SRC_ALPHA, GL_ONE_MINUS_SRC_ALPHA); glDisable(GL_BLEND); // Enable depth testing glEnable(GL_DEPTH_TEST); glDepthFunc(GL_LESS); glDepthMask(GL_TRUE); } Heres the drawSkybox that gets called in the drawFrame method: -(void)drawSkyBox { glDisable(GL_LIGHTING); glDisable(GL_DEPTH_TEST); glEnableClientState(GL_VERTEX_ARRAY); glEnableClientState(GL_NORMAL_ARRAY); glEnableClientState(GL_TEXTURE_COORD_ARRAY); static const SSVertex3D vertices[] = { {-1.0, 1.0, -0.0}, { 1.0, 1.0, -0.0}, {-1.0, -1.0, -0.0}, { 1.0, -1.0, -0.0} }; static const SSVertex3D normals[] = { {0.0, 0.0, 1.0}, {0.0, 0.0, 1.0}, {0.0, 0.0, 1.0}, {0.0, 0.0, 1.0} }; static const GLfloat texCoords[] = { 0.0, 0.5, 0.5, 0.5, 0.0, 0.0, 0.5, 0.0 }; glLoadIdentity(); glTranslatef(0.0, 0.0, -3.0); glBindTexture(GL_TEXTURE_2D, texture[0]); glVertexPointer(3, GL_FLOAT, 0, vertices); glNormalPointer(GL_FLOAT, 0, normals); glTexCoordPointer(2, GL_FLOAT, 0, texCoords); glDrawArrays(GL_TRIANGLE_STRIP, 0, 4); glDisableClientState(GL_VERTEX_ARRAY); glDisableClientState(GL_NORMAL_ARRAY); glDisableClientState(GL_TEXTURE_COORD_ARRAY); glEnable(GL_LIGHTING); glEnable(GL_DEPTH_TEST); } Heres the init Skybox: -(void)initSkyBox { // Turn necessary features on glEnable(GL_TEXTURE_2D); glEnable(GL_BLEND); glBlendFunc(GL_ONE, GL_SRC_COLOR); // Bind the number of textures we need, in this case one. glGenTextures(1, &texture[0]); // create a texture obj, give unique ID glBindTexture(GL_TEXTURE_2D, texture[0]); // load our new texture name into the current texture glTexParameteri(GL_TEXTURE_2D,GL_TEXTURE_MIN_FILTER,GL_LINEAR); glTexParameteri(GL_TEXTURE_2D,GL_TEXTURE_MAG_FILTER,GL_LINEAR); NSString *path = [[NSBundle mainBundle] pathForResource:@"space" ofType:@"jpg"]; NSData *texData = [[NSData alloc] initWithContentsOfFile:path]; UIImage *image = [[UIImage alloc] initWithData:texData]; GLuint width = CGImageGetWidth(image.CGImage); GLuint height = CGImageGetHeight(image.CGImage); CGColorSpaceRef colorSpace = CGColorSpaceCreateDeviceRGB(); void *imageData = malloc( height * width * 4 ); // times 4 because will write one byte for rgb and alpha CGContextRef cgContext = CGBitmapContextCreate( imageData, width, height, 8, 4 * width, colorSpace, kCGImageAlphaPremultipliedLast | kCGBitmapByteOrder32Big ); // Flip the Y-axis CGContextTranslateCTM (cgContext, 0, height); CGContextScaleCTM (cgContext, 1.0, -1.0); CGColorSpaceRelease( colorSpace ); CGContextClearRect( cgContext, CGRectMake( 0, 0, width, height ) ); CGContextDrawImage( cgContext, CGRectMake( 0, 0, width, height ), image.CGImage ); glTexImage2D(GL_TEXTURE_2D, 0, GL_RGBA, width, height, 0, GL_RGBA, GL_UNSIGNED_BYTE, imageData); CGContextRelease(cgContext); free(imageData); [image release]; [texData release]; } Any help is greatly appreciated.

    Read the article

  • Stepping outside Visual Studio IDE [Part 1 of 2] with Eclipse

    - by mbcrump
    “If you're walking down the right path and you're willing to keep walking, eventually you'll make progress." – Barack Obama In my quest to become a better programmer, I’ve decided to start the process of learning Java. I will be primary using the Eclipse Language IDE. I will not bore you with the history just what is needed for a .NET developer to get up and running. I will provide links, screenshots and a few brief code tutorials. Links to documentation. The Official Eclipse FAQ’s Links to binaries. Eclipse IDE for Java EE Developers the Galileo Package (based on Eclipse 3.5 SR2)  Sun Developer Network – Java Eclipse officially recommends Java version 5 (also known as 1.5), although many Eclipse users use the newer version 6 (1.6). That's it, nothing more is required except to compile and run java. Installation Unzip the Eclipse IDE for Java EE Developers and double click the file named Eclipse.exe. You will probably want to create a link for it on your desktop. Once, it’s installed and launched you will have to select a workspace. Just accept the defaults and you will see the following: Lets go ahead and write a simple program. To write a "Hello World" program follow these steps: Start Eclipse. Create a new Java Project: File->New->Project. Select "Java" in the category list. Select "Java Project" in the project list. Click "Next". Enter a project name into the Project name field, for example, "HW Project". Click "Finish" Allow it to open the Java perspective Create a new Java class: Click the "Create a Java Class" button in the toolbar. (This is the icon below "Run" and "Window" with a tooltip that says "New Java Class.") Enter "HW" into the Name field. Click the checkbox indicating that you would like Eclipse to create a "public static void main(String[] args)" method. Click "Finish". A Java editor for HW.java will open. In the main method enter the following line.      System.out.println("This is my first java program and btw Hello World"); Save using ctrl-s. This automatically compiles HW.java. Click the "Run" button in the toolbar (looks like a VCR play button). You will be prompted to create a Launch configuration. Select "Java Application" and click "New". Click "Run" to run the Hello World program. The console will open and display "This is my first java program and btw Hello World". You now have your first java program, lets go ahead and make an applet. Since you already have the HW.java open, click inside the window and remove all code. Now copy/paste the following code snippet. Java Code Snippet for an applet. 1: import java.applet.Applet; 2: import java.awt.Graphics; 3: import java.awt.Color; 4:  5: @SuppressWarnings("serial") 6: public class HelloWorld extends Applet{ 7:  8: String text = "I'm a simple applet"; 9:  10: public void init() { 11: text = "I'm a simple applet"; 12: setBackground(Color.GREEN); 13: } 14:  15: public void start() { 16: System.out.println("starting..."); 17: } 18:  19: public void stop() { 20: System.out.println("stopping..."); 21: } 22:  23: public void destroy() { 24: System.out.println("preparing to unload..."); 25: } 26:  27: public void paint(Graphics g){ 28: System.out.println("Paint"); 29: g.setColor(Color.blue); 30: g.drawRect(0, 0, 31: getSize().width -1, 32: getSize().height -1); 33: g.setColor(Color.black); 34: g.drawString(text, 15, 25); 35: } 36: } The Eclipse IDE should look like Click "Run" to run the Hello World applet. Now, lets test our new java applet. So, navigate over to your workspace for example: “C:\Users\mbcrump\workspace\HW Project\bin” and you should see 2 files. HW.class java.policy.applet Create a HTML page with the following code: 1: <HTML> 2: <BODY> 3: <APPLET CODE=HW.class WIDTH=200 HEIGHT=100> 4: </APPLET> 5: </BODY> 6: </HTML> Open, the HTML page in Firefox or IE and you will see your applet running.  I hope this brief look at the Eclipse IDE helps someone get acquainted with Java Development. Even if your full time gig is with .NET, it will not hurt to have another language in your tool belt. As always, I welcome any suggestions or comments.

    Read the article

  • Airline mess - what a journey

    - by Mike Dietrich
    What a day, what a journey ... Flew this noon from Munich to Zuerich for catch my ongoing flight to San Francisco with Swiss. And that day did start very well as Lufthansa messed up the connection flight by 42 minutes for a 35 minute flight. And as I was obviously the only passenger connection to San Francisco nobody picked me up at the airplane to bring me directly to my connection as Swiss did for the 8 passengers connection to Miami. So I missed my flight. What a start - and many thanks to Lufthansa. I was not the only one missing a connection as Lufthansa/Swiss had canceled the flight before due to "technical problems". In Zuerich Swiss did rebook me via Frankfurt with Lufthansa to board a United Airlines flight to San Francisco. "Ouch" I thought. I had my share of experience with United already as they've messed up my luggage on the way to San Francisco some years ago and it took them five (!!!) days to fly my bag over and deliver it. But actually it was the only option today. So I said "Yes". A big mistake as I've learned later on. The Frankfurt flight was delayed as well "due to a late incoming aircraft". But there was plenty of time. And I went to the Swiss counter at the gate and let them check if my baggage is on that flight to Frankfurt. They've said "Yes". Boarding the plane with a delay of 45 minutes (the typical Lufthansa delay these days) I spotted my Rimowa trolley right next to the plane on the airfield. So I was sure that it will be send to Frankfurt. In Frankfurt I went to the United counter once it did open - had to go through the passport check they do for US flights as well - and they've said "Yes, your luggage is with us". Well ... Arriving in San Francisco with just a bit of a some minutes delay and a very fast immigration procedure I saw the first bags with Priority tags getting pushed to the baggage claim - but mine was not there. I did wait ... and wait ... and wait. Well, thanks United, you did it again!!! I flew twice in the past years United Airlines - and in both cases they've messed up my luggage on the way to San Francisco. How lovely is that ... Now the real fun started again as the lady at the "Lost and Found" counter for luggage spotted my luggage in her system in Zuerich - and told me it's supposed to be sent with LH1191 to Frankfurt on Sept 27. But this was yesterday in Europe - it's already Sept 28 - and I saw my luggage in front of the airplane. So I'd suppose it's in Frankfurt already. But what could she do? Nothing but doing the awful paperwork. And "No Mr Dietrich, we don't call international numbers". Thank you, United. Next time I'll try to get a contract for a US land line in advance. They can't even tell you which plane will bring your luggage. It may be tomorrow with UA flight arriving around 4pm in SFO. I'm looking forward to some hours in the wonderful United Airlines call center waiting line. Last time I did spend 60-90 minutes every day until I got my luggage. If it takes again that long then OOW will be over by then. I love airline travel - and especially with United Airlines. And by the way ... they gave us these nice fancy packages during the flight:  That looks good - what's in that box??? Yes, really ... a bag of potato chips. Pure fat - very healthy.  I doubt that I'll ever fly United Airlines again!!!

    Read the article

  • 7 Steps To Cut Recruiting Costs & Drive Exceptional Business Results

    - by Oracle Accelerate for Midsize Companies
    By Steve Viarengo, Vice President Product Management, Oracle Taleo Cloud Services  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 In good times, trimming operational costs is an ongoing goal. In tough times, it’s a necessity. In both good times and bad, however, recruiting occurs. Growth increases headcount in good times, and opportunistic or replacement hiring occurs in slow business cycles. By employing creative recruiting strategies in tandem with the latest technology developments, you can reduce recruiting costs while driving exceptional business results. Here are some critical areas to focus on. 1.  Target Direct Cost Savings Total recruiting process expenses are the sum of external costs plus internal labor costs. Most organizations can reduce recruiting expenses with direct cost savings. While additional savings on indirect costs can be realized from process improvement and efficiency gains, there are direct cost savings and benefits readily available in three broad areas: sourcing, assessments, and green recruiting. 2. Sourcing: Reduce Agency Costs Agency search firm fees can amount to 35 percent of a new employee’s annual base salary. Typically taken from the hiring department budget, these fees may not be visible to HR. By relying on internal mobility programs, referrals, candidate pipelines, and corporate career Websites, organizations can reduce or eliminate this agency spend. And when you do have to pay third-party agency fees, you can optimize the value you receive by collaborating with agencies to identify referred candidates, ensure access to candidate data and history, and receive automatic notifications and correspondence. 3. Sourcing: Reduce Advertising Costs You can realize significant cost reductions by placing all job positions on your corporate career Website. This will allow you to reap a substantial number of candidates at minimal cost compared to job boards and other sourcing options. 4.  Sourcing: Internal Talent Pool Internal talent pools provide a way to reduce sourcing and advertising costs while delivering improved productivity and retention. Internal redeployment reduces costs and ramp-up time while increasing retention and employee satisfaction. 5.  Sourcing: External Talent Pool Strategic recruiting requires identifying and matching people with a given set of skills to a particular job while efficiently allocating sourcing expenditures. By using an e-recruiting system (which drives external talent pool management) with a candidate relationship database, you can automate prescreening and candidate matching while communicating with targeted candidates. Candidate relationship management can lower sourcing costs by marketing new job opportunities to candidates sourced in the past. By mining the talent pool in this fashion, you eliminate the need to source a new pool of candidates for each new requisition. Managing and mining the corporate candidate database can reduce the sourcing cost per candidate by as much as 50 percent. 6.  Assessments: Reduce Turnover Costs By taking advantage of assessments during the recruitment process, you can achieve a range of benefits, including better productivity, superior candidate performance, and lower turnover (providing considerable savings). Assessments also save recruiter and hiring manager time by focusing on a short list of qualified candidates. Hired for fit, such candidates tend to stay with the organization and produce quality work—ultimately driving revenue.  7. Green Recruiting: Reduce Paper and Processing Costs You can reduce recruiting costs by automating the process—and making it green. A paperless process informs candidates that you’re dedicated to green recruiting. It also leads to direct cost savings. E-recruiting reduces energy use and pollution associated with manufacturing, transporting, and recycling paper products. And process automation saves energy in mailing, storage, handling, filing, and reporting tasks. Direct cost savings come from reduced paperwork related to résumés, advertising, and onboarding. Improving the recruiting process through sourcing, assessments, and green recruiting not only saves costs. It also positions the company to improve the talent base during the recession while retaining the ability to grow appropriately in recovery. /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Calibri","sans-serif"; mso-bidi-font-family:"Times New Roman";} Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Calibri","sans-serif"; mso-bidi-font-family:"Times New Roman";}

    Read the article

  • Oracle NoSQL Database Exceeds 1 Million Mixed YCSB Ops/Sec

    - by Charles Lamb
    We ran a set of YCSB performance tests on Oracle NoSQL Database using SSD cards and Intel Xeon E5-2690 CPUs with the goal of achieving 1M mixed ops/sec on a 95% read / 5% update workload. We used the standard YCSB parameters: 13 byte keys and 1KB data size (1,102 bytes after serialization). The maximum database size was 2 billion records, or approximately 2 TB of data. We sized the shards to ensure that this was not an "in-memory" test (i.e. the data portion of the B-Trees did not fit into memory). All updates were durable and used the "simple majority" replica ack policy, effectively 'committing to the network'. All read operations used the Consistency.NONE_REQUIRED parameter allowing reads to be performed on any replica. In the past we have achieved 100K ops/sec using SSD cards on a single shard cluster (replication factor 3) so for this test we used 10 shards on 15 Storage Nodes with each SN carrying 2 Rep Nodes and each RN assigned to its own SSD card. After correcting a scaling problem in YCSB, we blew past the 1M ops/sec mark with 8 shards and proceeded to hit 1.2M ops/sec with 10 shards.  Hardware Configuration We used 15 servers, each configured with two 335 GB SSD cards. We did not have homogeneous CPUs across all 15 servers available to us so 12 of the 15 were Xeon E5-2690, 2.9 GHz, 2 sockets, 32 threads, 193 GB RAM, and the other 3 were Xeon E5-2680, 2.7 GHz, 2 sockets, 32 threads, 193 GB RAM.  There might have been some upside in having all 15 machines configured with the faster CPU, but since CPU was not the limiting factor we don't believe the improvement would be significant. The client machines were Xeon X5670, 2.93 GHz, 2 sockets, 24 threads, 96 GB RAM. Although the clients had 96 GB of RAM, neither the NoSQL Database or YCSB clients require anywhere near that amount of memory and the test could have just easily been run with much less. Networking was all 10GigE. YCSB Scaling Problem We made three modifications to the YCSB benchmark. The first was to allow the test to accommodate more than 2 billion records (effectively int's vs long's). To keep the key size constant, we changed the code to use base 32 for the user ids. The second change involved to the way we run the YCSB client in order to make the test itself horizontally scalable.The basic problem has to do with the way the YCSB test creates its Zipfian distribution of keys which is intended to model "real" loads by generating clusters of key collisions. Unfortunately, the percentage of collisions on the most contentious keys remains the same even as the number of keys in the database increases. As we scale up the load, the number of collisions on those keys increases as well, eventually exceeding the capacity of the single server used for a given key.This is not a workload that is realistic or amenable to horizontal scaling. YCSB does provide alternate key distribution algorithms so this is not a shortcoming of YCSB in general. We decided that a better model would be for the key collisions to be limited to a given YCSB client process. That way, as additional YCSB client processes (i.e. additional load) are added, they each maintain the same number of collisions they encounter themselves, but do not increase the number of collisions on a single key in the entire store. We added client processes proportionally to the number of records in the database (and therefore the number of shards). This change to the use of YCSB better models a use case where new groups of users are likely to access either just their own entries, or entries within their own subgroups, rather than all users showing the same interest in a single global collection of keys. If an application finds every user having the same likelihood of wanting to modify a single global key, that application has no real hope of getting horizontal scaling. Finally, we used read/modify/write (also known as "Compare And Set") style updates during the mixed phase. This uses versioned operations to make sure that no updates are lost. This mode of operation provides better application behavior than the way we have typically run YCSB in the past, and is only practical at scale because we eliminated the shared key collision hotspots.It is also a more realistic testing scenario. To reiterate, all updates used a simple majority replica ack policy making them durable. Scalability Results In the table below, the "KVS Size" column is the number of records with the number of shards and the replication factor. Hence, the first row indicates 400m total records in the NoSQL Database (KV Store), 2 shards, and a replication factor of 3. The "Clients" column indicates the number of YCSB client processes. "Threads" is the number of threads per process with the total number of threads. Hence, 90 threads per YCSB process for a total of 360 threads. The client processes were distributed across 10 client machines. Shards KVS Size Clients Mixed (records) Threads OverallThroughput(ops/sec) Read Latencyav/95%/99%(ms) Write Latencyav/95%/99%(ms) 2 400m(2x3) 4 90(360) 302,152 0.76/1/3 3.08/8/35 4 800m(4x3) 8 90(720) 558,569 0.79/1/4 3.82/16/45 8 1600m(8x3) 16 90(1440) 1,028,868 0.85/2/5 4.29/21/51 10 2000m(10x3) 20 90(1800) 1,244,550 0.88/2/6 4.47/23/53

    Read the article

  • In 10.10, USB 3.0 PCI Express card recognized by lspci but not lsusb or dmesg. How to fix?

    - by Paul
    Asus N PC, runs 10.10 x86_64 The Asus N comes with 4 usb 2.0 ports, each labelled 2.0 on the case. Attempting to add two usb 3.0 ports to be provided by a generic usb 3.0 pci express card installed in the pci expres slot. The new card says usb 3.0 and has the blue ports. The card is installed into the laptop unpowered, then the laptop is powered on and boots normally. Nothing happens when a USB 3.0 flash drive is inserted into the usb 3.0 port. uname -a Linux drpaulbrewer-N90SV 2.6.35.8 #1 SMP Fri Jan 14 15:54:11 EST 2011 x86_64 GNU/Linux lspci -v 00:00.0 Host bridge: Silicon Integrated Systems [SiS] 671MX Subsystem: ASUSTeK Computer Inc. Device 1b27 Flags: bus master, medium devsel, latency 64 Kernel modules: sis-agp 00:01.0 PCI bridge: Silicon Integrated Systems [SiS] PCI-to-PCI bridge (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: fa000000-fdefffff Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff Capabilities: [d0] Express Root Port (Slot+), MSI 00 Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit- Capabilities: [f4] Power Management version 2 Capabilities: [70] Subsystem: Silicon Integrated Systems [SiS] PCI-to-PCI bridge Kernel driver in use: pcieport 00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS968 [MuTIOL Media IO] (rev 01) Flags: bus master, medium devsel, latency 0 00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev 01) (prog-if 80 [Master]) Subsystem: ASUSTeK Computer Inc. Device 1b27 Flags: bus master, medium devsel, latency 128 I/O ports at 01f0 [size=8] I/O ports at 03f4 [size=1] I/O ports at 0170 [size=8] I/O ports at 0374 [size=1] I/O ports at ffe0 [size=16] Capabilities: [58] Power Management version 2 Kernel driver in use: pata_sis 00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f) (prog-if 10 [OHCI]) Subsystem: ASUSTeK Computer Inc. Device 1b27 Flags: bus master, medium devsel, latency 64, IRQ 20 Memory at f9fff000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f) (prog-if 10 [OHCI]) Subsystem: ASUSTeK Computer Inc. Device 1b27 Flags: bus master, medium devsel, latency 64, IRQ 21 Memory at f9ffe000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:03.3 USB Controller: Silicon Integrated Systems [SiS] USB 2.0 Controller (prog-if 20 [EHCI]) Subsystem: ASUSTeK Computer Inc. Device 1b27 Flags: bus master, medium devsel, latency 64, IRQ 22 Memory at f9ffd000 (32-bit, non-prefetchable) [size=4K] Capabilities: [50] Power Management version 2 Kernel driver in use: ehci_hcd 00:04.0 Ethernet controller: Silicon Integrated Systems [SiS] 191 Gigabit Ethernet Adapter (rev 02) Subsystem: ASUSTeK Computer Inc. Device 11f5 Flags: bus master, medium devsel, latency 0, IRQ 19 Memory at f9ffcc00 (32-bit, non-prefetchable) [size=128] I/O ports at cc00 [size=128] Capabilities: [40] Power Management version 2 Kernel driver in use: sis190 Kernel modules: sis190 00:05.0 IDE interface: Silicon Integrated Systems [SiS] SATA Controller / IDE mode (rev 03) (prog-if 8f [Master SecP SecO PriP PriO]) Subsystem: ASUSTeK Computer Inc. Device 1b27 Flags: bus master, medium devsel, latency 64, IRQ 17 I/O ports at c800 [size=8] I/O ports at c400 [size=4] I/O ports at c000 [size=8] I/O ports at bc00 [size=4] I/O ports at b800 [size=16] I/O ports at b400 [size=128] Capabilities: [58] Power Management version 2 Kernel driver in use: sata_sis Kernel modules: sata_sis 00:06.0 PCI bridge: Silicon Integrated Systems [SiS] PCI-to-PCI bridge (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 Memory behind bridge: fdf00000-fdffffff Capabilities: [b0] Subsystem: Silicon Integrated Systems [SiS] Device 0004 Capabilities: [c0] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [d0] Express Root Port (Slot+), MSI 00 Capabilities: [f4] Power Management version 2 Kernel driver in use: pcieport 00:07.0 PCI bridge: Silicon Integrated Systems [SiS] PCI-to-PCI bridge (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=03, subordinate=06, sec-latency=0 I/O behind bridge: 0000e000-0000efff Memory behind bridge: fe000000-febfffff Prefetchable memory behind bridge: 00000000f6000000-00000000f8ffffff Capabilities: [b0] Subsystem: Silicon Integrated Systems [SiS] Device 0004 Capabilities: [c0] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [d0] Express Root Port (Slot+), MSI 00 Capabilities: [f4] Power Management version 2 Kernel driver in use: pcieport 00:0f.0 Audio device: Silicon Integrated Systems [SiS] Azalia Audio Controller Subsystem: ASUSTeK Computer Inc. Device 17b3 Flags: bus master, medium devsel, latency 0, IRQ 18 Memory at f9ff4000 (32-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 01:00.0 VGA compatible controller: nVidia Corporation G96 [GeForce GT 130M] (rev a1) (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. Device 2021 Flags: bus master, fast devsel, latency 0, IRQ 16 Memory at fc000000 (32-bit, non-prefetchable) [size=16M] Memory at d0000000 (64-bit, prefetchable) [size=256M] Memory at fa000000 (64-bit, non-prefetchable) [size=32M] I/O ports at dc00 [size=128] [virtual] Expansion ROM at fde80000 [disabled] [size=512K] Capabilities: [60] Power Management version 3 Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+ Capabilities: [78] Express Endpoint, MSI 00 Capabilities: [b4] Vendor Specific Information: Len=14 <?> Kernel driver in use: nvidia Kernel modules: nvidia-current, nouveau, nvidiafb 02:00.0 Network controller: Atheros Communications Inc. AR928X Wireless Network Adapter (PCI-Express) (rev 01) Subsystem: Device 1a3b:1067 Flags: bus master, fast devsel, latency 0, IRQ 16 Memory at fdff0000 (64-bit, non-prefetchable) [size=64K] Capabilities: [40] Power Management version 2 Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit- Capabilities: [60] Express Legacy Endpoint, MSI 00 Capabilities: [90] MSI-X: Enable- Count=1 Masked- Kernel driver in use: ath9k Kernel modules: ath9k 03:00.0 USB Controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 03) (prog-if 30) Flags: bus master, fast devsel, latency 0, IRQ 10 Memory at febfe000 (64-bit, non-prefetchable) [size=8K] Capabilities: [50] Power Management version 3 Capabilities: [70] MSI: Enable- Count=1/8 Maskable- 64bit+ Capabilities: [90] MSI-X: Enable- Count=8 Masked- Capabilities: [a0] Express Endpoint, MSI 00 lsusb Bus 003 Device 002: ID 0b05:1751 ASUSTek Computer, Inc. BT-253 Bluetooth Adapter Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 004: ID 0bda:0158 Realtek Semiconductor Corp. USB 2.0 multicard reader Bus 001 Device 002: ID 04f2:b071 Chicony Electronics Co., Ltd 2.0M UVC Webcam / CNF7129 Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub dmesg trying to post dmesg exceeded the stackexchange posting limit of 30K... but nothing there is usb 3.0

    Read the article

  • Developing Schema Compare for Oracle (Part 6): 9i Query Performance

    - by Simon Cooper
    All throughout the EAP and beta versions of Schema Compare for Oracle, our main request was support for Oracle 9i. After releasing version 1.0 with support for 10g and 11g, our next step was then to get version 1.1 of SCfO out with support for 9i. However, there were some significant problems that we had to overcome first. This post will concentrate on query execution time. When we first tested SCfO on a 9i server, after accounting for various changes to the data dictionary, we found that database registration was taking a long time. And I mean a looooooong time. The same database that on 10g or 11g would take a couple of minutes to register would be taking upwards of 30 mins on 9i. Obviously, this is not ideal, so a poke around the query execution plans was required. As an example, let's take the table population query - the one that reads ALL_TABLES and joins it with a few other dictionary views to get us back our list of tables. On 10g, this query takes 5.6 seconds. On 9i, it takes 89.47 seconds. The difference in execution plan is even more dramatic - here's the (edited) execution plan on 10g: -------------------------------------------------------------------------------| Id | Operation | Name | Bytes | Cost |-------------------------------------------------------------------------------| 0 | SELECT STATEMENT | | 108K| 939 || 1 | SORT ORDER BY | | 108K| 939 || 2 | NESTED LOOPS OUTER | | 108K| 938 ||* 3 | HASH JOIN RIGHT OUTER | | 103K| 762 || 4 | VIEW | ALL_EXTERNAL_LOCATIONS | 2058 | 3 ||* 20 | HASH JOIN RIGHT OUTER | | 73472 | 759 || 21 | VIEW | ALL_EXTERNAL_TABLES | 2097 | 3 ||* 34 | HASH JOIN RIGHT OUTER | | 39920 | 755 || 35 | VIEW | ALL_MVIEWS | 51 | 7 || 58 | NESTED LOOPS OUTER | | 39104 | 748 || 59 | VIEW | ALL_TABLES | 6704 | 668 || 89 | VIEW PUSHED PREDICATE | ALL_TAB_COMMENTS | 2025 | 5 || 106 | VIEW | ALL_PART_TABLES | 277 | 11 |------------------------------------------------------------------------------- And the same query on 9i: -------------------------------------------------------------------------------| Id | Operation | Name | Bytes | Cost |-------------------------------------------------------------------------------| 0 | SELECT STATEMENT | | 16P| 55G|| 1 | SORT ORDER BY | | 16P| 55G|| 2 | NESTED LOOPS OUTER | | 16P| 862M|| 3 | NESTED LOOPS OUTER | | 5251G| 992K|| 4 | NESTED LOOPS OUTER | | 4243M| 2578 || 5 | NESTED LOOPS OUTER | | 2669K| 1440 ||* 6 | HASH JOIN OUTER | | 398K| 302 || 7 | VIEW | ALL_TABLES | 342K| 276 || 29 | VIEW | ALL_MVIEWS | 51 | 20 ||* 50 | VIEW PUSHED PREDICATE | ALL_TAB_COMMENTS | 2043 | ||* 66 | VIEW PUSHED PREDICATE | ALL_EXTERNAL_TABLES | 1777K| ||* 80 | VIEW PUSHED PREDICATE | ALL_EXTERNAL_LOCATIONS | 1744K| ||* 96 | VIEW | ALL_PART_TABLES | 852K| |------------------------------------------------------------------------------- Have a look at the cost column. 10g's overall query cost is 939, and 9i is 55,000,000,000 (or more precisely, 55,496,472,769). It's also having to process far more data. What on earth could be causing this huge difference in query cost? After trawling through the '10g New Features' documentation, we found item 1.9.2.21. Before 10g, Oracle advised that you do not collect statistics on data dictionary objects. From 10g, it advised that you do collect statistics on the data dictionary; for our queries, Oracle therefore knows what sort of data is in the dictionary tables, and so can generate an efficient execution plan. On 9i, no statistics are present on the system tables, so Oracle has to use the Rule Based Optimizer, which turns most LEFT JOINs into nested loops. If we force 9i to use hash joins, like 10g, we get a much better plan: -------------------------------------------------------------------------------| Id | Operation | Name | Bytes | Cost |-------------------------------------------------------------------------------| 0 | SELECT STATEMENT | | 7587K| 3704 || 1 | SORT ORDER BY | | 7587K| 3704 ||* 2 | HASH JOIN OUTER | | 7587K| 822 ||* 3 | HASH JOIN OUTER | | 5262K| 616 ||* 4 | HASH JOIN OUTER | | 2980K| 465 ||* 5 | HASH JOIN OUTER | | 710K| 432 ||* 6 | HASH JOIN OUTER | | 398K| 302 || 7 | VIEW | ALL_TABLES | 342K| 276 || 29 | VIEW | ALL_MVIEWS | 51 | 20 || 50 | VIEW | ALL_PART_TABLES | 852K| 104 || 78 | VIEW | ALL_TAB_COMMENTS | 2043 | 14 || 93 | VIEW | ALL_EXTERNAL_LOCATIONS | 1744K| 31 || 106 | VIEW | ALL_EXTERNAL_TABLES | 1777K| 28 |------------------------------------------------------------------------------- That's much more like it. This drops the execution time down to 24 seconds. Not as good as 10g, but still an improvement. There are still several problems with this, however. 10g introduced a new join method - a right outer hash join (used in the first execution plan). The 9i query optimizer doesn't have this option available, so forcing a hash join means it has to hash the ALL_TABLES table, and furthermore re-hash it for every hash join in the execution plan; this could be thousands and thousands of rows. And although forcing hash joins somewhat alleviates this problem on our test systems, there's no guarantee that this will improve the execution time on customers' systems; it may even increase the time it takes (say, if all their tables are partitioned, or they've got a lot of materialized views). Ideally, we would want a solution that provides a speedup whatever the input. To try and get some ideas, we asked some oracle performance specialists to see if they had any ideas or tips. Their recommendation was to add a hidden hook into the product that allowed users to specify their own query hints, or even rewrite the queries entirely. However, we would prefer not to take that approach; as well as a lot of new infrastructure & a rewrite of the population code, it would have meant that any users of 9i would have to spend some time optimizing it to get it working on their system before they could use the product. Another approach was needed. All our population queries have a very specific pattern - a base table provides most of the information we need (ALL_TABLES for tables, or ALL_TAB_COLS for columns) and we do a left join to extra subsidiary tables that fill in gaps (for instance, ALL_PART_TABLES for partition information). All the left joins use the same set of columns to join on (typically the object owner & name), so we could re-use the hash information for each join, rather than re-hashing the same columns for every join. To allow us to do this, along with various other performance improvements that could be done for the specific query pattern we were using, we read all the tables individually and do a hash join on the client. Fortunately, this 'pure' algorithmic problem is the kind that can be very well optimized for expected real-world situations; as well as storing row data we're not using in the hash key on disk, we use very specific memory-efficient data structures to store all the information we need. This allows us to achieve a database population time that is as fast as on 10g, and even (in some situations) slightly faster, and a memory overhead of roughly 150 bytes per row of data in the result set (for schemas with 10,000 tables in that means an extra 1.4MB memory being used during population). Next: fun with the 9i dictionary views.

    Read the article

  • Why won't USB 3.0 external hard drive run at USB 3.0 speeds?

    - by jgottula
    I recently purchased a PCI Express x1 USB 3.0 controller card (containing the NEC USB 3.0 controller) with the intent of using a USB 3.0 external hard drive with my Linux box. I installed the card in an empty PCIe slot on my motherboard, connected the card to a power cable, strung a USB 3.0 cable between one of the new ports and my external HDD, and connected the HDD to a wall socket for power. Booting the system, the drive works 100% as intended, with the one exception of throughput: rather than using SuperSpeed 4.8 Gbps connectivity, it seems to be falling back to High Speed 480 Mbps USB 2.0-style throughput. Disk Utility shows it as a 480 Mbps device, and running a couple Disk Utility and dd benchmarks confirms that the drive fails to exceed ~40 MB/s (the approximate limit of USB 2.0), despite it being an SSD capable of far more than that. When I connect my USB 3.0 HDD, dmesg shows this: [ 3923.280018] usb 3-2: new high speed USB device using ehci_hcd and address 6 where I would expect to find this: [ 3923.280018] usb 3-2: new SuperSpeed USB device using xhci_hcd and address 6 My system was running on kernel 2.6.35-25-generic at the time. Then, I stumbled upon this forum thread by an individual who found that a bug, which was present in kernels prior to 2.6.37-rc5, could be the culprit for this type of problem. Consequently, I installed the 2.6.37-generic mainline Ubuntu kernel to determine if the problem would go away. It didn't, so I tried 2.6.38-rc3-generic, and even the 2.6.38 nightly from 2010.02.01, to no avail. In short, I'm trying to determine why, with USB 3.0 support in the kernel, my USB 3.0 drive fails to run at full SuperSpeed throughput. See the comments under this question for additional details. Output that might be relevant to the problem (when booting from 2.6.38-rc3): Relevant lines from dmesg: [ 19.589491] xhci_hcd 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 19.589512] xhci_hcd 0000:03:00.0: setting latency timer to 64 [ 19.589516] xhci_hcd 0000:03:00.0: xHCI Host Controller [ 19.589623] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 12 [ 19.650492] xhci_hcd 0000:03:00.0: irq 17, io mem 0xf8100000 [ 19.650556] xhci_hcd 0000:03:00.0: irq 47 for MSI/MSI-X [ 19.650560] xhci_hcd 0000:03:00.0: irq 48 for MSI/MSI-X [ 19.650563] xhci_hcd 0000:03:00.0: irq 49 for MSI/MSI-X [ 19.653946] xHCI xhci_add_endpoint called for root hub [ 19.653948] xHCI xhci_check_bandwidth called for root hub Relevant section of sudo lspci -v: 03:00.0 USB Controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 03) (prog-if 30) Flags: bus master, fast devsel, latency 0, IRQ 17 Memory at f8100000 (64-bit, non-prefetchable) [size=8K] Capabilities: [50] Power Management version 3 Capabilities: [70] MSI: Enable- Count=1/8 Maskable- 64bit+ Capabilities: [90] MSI-X: Enable+ Count=8 Masked- Capabilities: [a0] Express Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting Capabilities: [140] Device Serial Number ff-ff-ff-ff-ff-ff-ff-ff Capabilities: [150] #18 Kernel driver in use: xhci_hcd Kernel modules: xhci-hcd Relevant section of sudo lsusb -v: Bus 012 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 3.00 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 3 bMaxPacketSize0 9 idVendor 0x1d6b Linux Foundation idProduct 0x0003 3.0 root hub bcdDevice 2.06 iManufacturer 3 Linux 2.6.38-020638rc3-generic xhci_hcd iProduct 2 xHCI Host Controller iSerial 1 0000:03:00.0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0004 1x 4 bytes bInterval 12 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 4 wHubCharacteristic 0x0009 Per-port power switching Per-port overcurrent protection TT think time 8 FS bits bPwrOn2PwrGood 10 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00 PortPwrCtrlMask 0xff Hub Port Status: Port 1: 0000.0100 power Port 2: 0000.0100 power Port 3: 0000.0100 power Port 4: 0000.0100 power Device Status: 0x0003 Self Powered Remote Wakeup Enabled Full, non-verbose lsusb: Bus 012 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 011 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 010 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 009 Device 003: ID 04d9:0702 Holtek Semiconductor, Inc. Bus 009 Device 002: ID 046d:c068 Logitech, Inc. G500 Laser Mouse Bus 009 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 006: ID 174c:5106 ASMedia Technology Inc. Bus 003 Device 004: ID 0bda:0151 Realtek Semiconductor Corp. Mass Storage Device (Multicard Reader) Bus 003 Device 002: ID 058f:6366 Alcor Micro Corp. Multi Flash Reader Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 006: ID 1687:0163 Kingmax Digital Inc. Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 046d:081b Logitech, Inc. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Full output: full dmesg full lspci full lsusb

    Read the article

  • Install Oracle Enterprise Linux 5 on VMWare

    - by TUFEKCIOGLU,FATIH
    In this article, we will try to install Install Oracle Enterprise Linux 5 on VMWare. To make the installation easier, I will show the screenshots of the whole steps. 1.   2.   3.   4.   5.   6. 7. 8.   9.   10.   11.   12.   13.   14.   15.   16.   17.   18.   19.   20.   21.   22.   23.   24.   25.   26.   27.   28.   29.   30.   31.   32.   33.   34.   35.   36.   37.   38.   39.   40.   41.   42.   43.   44.   45.   46.   47.   48.   49.   50.   51.   52.   53.   54.   55.   56.   57.   58.   59.   60.   61.   62.   The installation is completed, Thanks, Fatih Tufekcioglu  

    Read the article

  • Custom page sizes in paging dropdown in Telerik RadGrid

    Working with Telerik RadControls for ASP.NET AJAX is actually quite easy and the initial effort to get started with the control suite is very low. Meaning that you can easily get good result with little time. But there are usually cases where you have to go a little further and dig a little bit deeper than the standard scenarios. In this article I am going to describe how you can customize the default values (10, 20 and 50) of the drop-down list in the paging element of RadGrid. Get control over the displayed page sizes while using numeric paging... The default page sizes are good but not always good enough The paging feature in RadGrid offers you 3, well actually 4, possible page sizes in the drop-down element out-of-the box, which are 10, 20 or 50 items. You can get a fourth option by specifying a value different than the three standards for the PageSize attribute, ie. 35 or 100. The drawback in that case is that it is the initial page size. Certainly, the available choices could be more flexible or even a little bit more intelligent. For example, by taking the total count of records into consideration. There are some interesting scenarios that would justify a customized page size element: A low number of records, like 14 or similar shouldn't provide a page size of 50, A high total count of records (ie: 300+) should offer more choices, ie: 100, 200, 500, or display of all records regardless of number of records I am sure that you might have your own requirements, and I hope that the following source code snippets might be helpful. Wiring the ItemCreated event In order to adjust and manipulate the existing RadComboBox in the paging element we have to handle the OnItemCreated event of RadGrid. Simply specify your code behind method in the attribute of the RadGrid tag, like so: <telerik:RadGrid ID="RadGridLive" runat="server" AllowPaging="true" PageSize="20"    AllowSorting="true" AutoGenerateColumns="false" OnNeedDataSource="RadGridLive_NeedDataSource"    OnItemDataBound="RadGrid_ItemDataBound" OnItemCreated="RadGrid_ItemCreated">    <ClientSettings EnableRowHoverStyle="true">        <ClientEvents OnRowCreated="RowCreated" OnRowSelected="RowSelected" />        <Resizing AllowColumnResize="True" AllowRowResize="false" ResizeGridOnColumnResize="false"            ClipCellContentOnResize="true" EnableRealTimeResize="false" AllowResizeToFit="true" />        <Scrolling AllowScroll="true" ScrollHeight="360px" UseStaticHeaders="true" SaveScrollPosition="true" />        <Selecting AllowRowSelect="true" />    </ClientSettings>    <MasterTableView DataKeyNames="AdvertID">        <PagerStyle AlwaysVisible="true" Mode="NextPrevAndNumeric" />        <Columns>            <telerik:GridBoundColumn HeaderText="Listing ID" DataField="AdvertID" DataType="System.Int32"                SortExpression="AdvertID" UniqueName="AdvertID">                <HeaderStyle Width="66px" />            </telerik:GridBoundColumn>             <!--//  ... and some more columns ... -->         </Columns>    </MasterTableView></telerik:RadGrid> To provide a consistent experience for your visitors it might be helpful to display the page size selection always. This is done by setting the AlwaysVisible attribute of the PagerStyle element to true, like highlighted above. Customize the values of page size Your delegate method for the ItemCreated event should look like this: protected void RadGrid_ItemCreated(object sender, GridItemEventArgs e){    if (e.Item is GridPagerItem)    {        var dropDown = (RadComboBox)e.Item.FindControl("PageSizeComboBox");        var totalCount = ((GridPagerItem)e.Item).Paging.DataSourceCount;        var sizes = new Dictionary<string, string>() {            {"10", "10"},            {"20", "20"},            {"50", "50"}        };        if (totalCount > 100)        {            sizes.Add("100", "100");        }        if (totalCount > 200)        {            sizes.Add("200", "200");        }        sizes.Add("All", totalCount.ToString());        dropDown.Items.Clear();        foreach (var size in sizes)        {            var cboItem = new RadComboBoxItem() { Text = size.Key, Value = size.Value };            cboItem.Attributes.Add("ownerTableViewId", e.Item.OwnerTableView.ClientID);            dropDown.Items.Add(cboItem);        }        dropDown.FindItemByValue(e.Item.OwnerTableView.PageSize.ToString()).Selected = true;    }} It is important that we explicitly check the event arguments for GridPagerItem as it is the control that contains the PageSizeComboBox control that we want to manipulate. To keep the actual modification and exposure of possible page size values flexible I am filling a Dictionary with the requested 'key/value'-pairs based on the number of total records displayed in the grid. As a final step, ensure that the previously selected value is the active one using the FindItemByValue() method. Of course, there might be different requirements but I hope that the snippet above provide a first insight into customized page size value in Telerik's Grid. The Grid demos describe a more advanced approach to customize the Pager.

    Read the article

  • C# XNA 4.0 multitextured cube

    - by chron
    So I am following this tutorial on how to draw a cube in XNA and I ran into a problem. Ok so my shader can only have texture right? I need to have a texture on the front and back of my cube. So I thought I could just have both textures stored in one texture. Problem is I do not know how to map out my UV coords to do so. (I tried dividing by 2 and such with no luck...). I am really new to this (not programming, just game development and some concepts), but how could I get UV coordinates for both halfs of the texture. private void ConstructCube(Vector3 Position,Vector3 Size) { _vertices = new VertexPositionNormalTexture[50]; // Calculate the position of the vertices on the top face. Vector3 topLeftFront = Position + new Vector3(-1.0f, 1.0f, -1.0f) * Size; Vector3 topLeftBack = Position + new Vector3(-1.0f, 1.0f, 1.0f) * Size; Vector3 topRightFront = Position + new Vector3(1.0f, 1.0f, -1.0f) * Size; Vector3 topRightBack = Position + new Vector3(1.0f, 1.0f, 1.0f) * Size; // Calculate the position of the vertices on the bottom face. Vector3 btmLeftFront = Position + new Vector3(-1.0f, -1.0f, -1.0f) * Size; Vector3 btmLeftBack = Position + new Vector3(-1.0f, -1.0f, 1.0f) * Size; Vector3 btmRightFront = Position + new Vector3(1.0f, -1.0f, -1.0f) * Size; Vector3 btmRightBack = Position + new Vector3(1.0f, -1.0f, 1.0f) * Size; // Normal vectors for each face (needed for lighting / display) Vector3 normalFront = new Vector3(0.0f, 0.0f, 1.0f) * Size; Vector3 normalBack = new Vector3(0.0f, 0.0f, -1.0f) * Size; Vector3 normalTop = new Vector3(0.0f, 1.0f, 0.0f) * Size; Vector3 normalBottom = new Vector3(0.0f, -1.0f, 0.0f) * Size; Vector3 normalLeft = new Vector3(-1.0f, 0.0f, 0.0f) * Size; Vector3 normalRight = new Vector3(1.0f, 0.0f, 0.0f) * Size; // UV texture coordinates Vector2 textureTopLeft = new Vector2(1.0f * Size.X, 0.0f * Size.Y); Vector2 textureTopRight = new Vector2(0.0f * Size.X, 0.0f * Size.Y); Vector2 textureBottomLeft = new Vector2(1.0f * Size.X, 1.0f * Size.Y); Vector2 textureBottomRight = new Vector2(0.0f * Size.X, 1.0f * Size.Y); // Add the vertices for the FRONT face. _vertices[0] = new VertexPositionNormalTexture(topLeftFront, normalFront, textureTopLeft); _vertices[1] = new VertexPositionNormalTexture(btmLeftFront, normalFront, textureBottomLeft); _vertices[2] = new VertexPositionNormalTexture(topRightFront, normalFront, textureTopRight); _vertices[3] = new VertexPositionNormalTexture(btmLeftFront, normalFront, textureBottomLeft); _vertices[4] = new VertexPositionNormalTexture(btmRightFront, normalFront, textureBottomRight); _vertices[5] = new VertexPositionNormalTexture(topRightFront, normalFront, textureTopRight); // Add the vertices for the BACK face. _vertices[6] = new VertexPositionNormalTexture(topLeftBack, normalBack, textureTopRight); _vertices[7] = new VertexPositionNormalTexture(topRightBack, normalBack, textureTopLeft); _vertices[8] = new VertexPositionNormalTexture(btmLeftBack, normalBack, textureBottomRight); _vertices[9] = new VertexPositionNormalTexture(btmLeftBack, normalBack, textureBottomRight); _vertices[10] = new VertexPositionNormalTexture(topRightBack, normalBack, textureTopLeft); _vertices[11] = new VertexPositionNormalTexture(btmRightBack, normalBack, textureBottomLeft); // Add the vertices for the TOP face. _vertices[12] = new VertexPositionNormalTexture(topLeftFront, normalTop, textureBottomLeft); _vertices[13] = new VertexPositionNormalTexture(topRightBack, normalTop, textureTopRight); _vertices[14] = new VertexPositionNormalTexture(topLeftBack, normalTop, textureTopLeft); _vertices[15] = new VertexPositionNormalTexture(topLeftFront, normalTop, textureBottomLeft); _vertices[16] = new VertexPositionNormalTexture(topRightFront, normalTop, textureBottomRight); _vertices[17] = new VertexPositionNormalTexture(topRightBack, normalTop, textureTopRight); // Add the vertices for the BOTTOM face. _vertices[18] = new VertexPositionNormalTexture(btmLeftFront, normalBottom, textureTopLeft); _vertices[19] = new VertexPositionNormalTexture(btmLeftBack, normalBottom, textureBottomLeft); _vertices[20] = new VertexPositionNormalTexture(btmRightBack, normalBottom, textureBottomRight); _vertices[21] = new VertexPositionNormalTexture(btmLeftFront, normalBottom, textureTopLeft); _vertices[22] = new VertexPositionNormalTexture(btmRightBack, normalBottom, textureBottomRight); _vertices[23] = new VertexPositionNormalTexture(btmRightFront, normalBottom, textureTopRight); // Add the vertices for the LEFT face. _vertices[24] = new VertexPositionNormalTexture(topLeftFront, normalLeft, textureTopRight); _vertices[25] = new VertexPositionNormalTexture(btmLeftBack, normalLeft, textureBottomLeft ); _vertices[26] = new VertexPositionNormalTexture(btmLeftFront, normalLeft, textureBottomRight ); _vertices[27] = new VertexPositionNormalTexture(topLeftBack, normalLeft, textureTopLeft); _vertices[28] = new VertexPositionNormalTexture(btmLeftBack, normalLeft, textureBottomLeft ); _vertices[29] = new VertexPositionNormalTexture(topLeftFront, normalLeft, textureTopRight ); // Add the vertices for the RIGHT face. _vertices[30] = new VertexPositionNormalTexture(topRightFront, normalRight, textureTopLeft); _vertices[31] = new VertexPositionNormalTexture(btmRightFront, normalRight, textureBottomLeft); _vertices[32] = new VertexPositionNormalTexture(btmRightBack, normalRight, textureBottomRight); _vertices[33] = new VertexPositionNormalTexture(topRightBack, normalRight, textureTopRight); _vertices[34] = new VertexPositionNormalTexture(topRightFront, normalRight, textureTopLeft); _vertices[35] = new VertexPositionNormalTexture(btmRightBack, normalRight, textureBottomRight); done = true; }

    Read the article

  • Windows Phone : le Marketplace a un an, 700 nouveaux développeurs rejoindraient la plateforme chaque mois d'après Distimo

    Le Windows Phone Marketplace fête son premier anniversaire Par mois, 700 nouveaux développeurs y publieraient leurs applications, d'après Distimo Mise à jour du 23/11/11 Il y a tout juste un an, Microsoft lançait la galerie d'applications de Windows Phone 7 dans 17 pays. Douze mois plus tard, le Marketplace est présent dans 18 pays supplémentaires et compte, d'après Distimo, un peu plus de 35.000 applications (un chiffre qui avoisine celui d'une autre étude parue ce mois-ci, lire ci-avant). Pour fêter cet anniversaire, le cabinet d'étude spécialisé dans les « App Stores » vient de publier un rapport entièrement dédié au Windows Phone Marketplace. On ne ...

    Read the article

  • Oracle OpenWorld ?? Oracle|Sun

    - by user13137902
    Oracle|Sun @ Oracle OpenWorld Tokyo 2012 ?? Solaris?????@Oracle Develop@Tokyo 2011 ??????????????????Oracle|Sun????????????? ??????????????????????????????(^ ^;) ?????? Oracle OpenWorld Tokyo 2012 ??4?4???4?6??3??? ???????? ????? ??????????????????? ???&?????????? Oracle OpenWorld Tokyo 2012 ???? ???&????? ????????????????????????????????????? ???Exa*???????????????????????????????? ????????????????????????????? ????Oracle OpenWorld Tokyo 2012???? Oracle|Sun ?????????????????????? ??????????????? K1-014/4(?) 9:00-11:15 ENGINEERED FOR INNOVATION ??????????????????·???????? ?????? ???·??? ????·???????? ???????·????????? ???·????? ????·???????? ???·??????·?????? ?????·?????? ?????????? ??????? ??????? ?? ?? S1-014/4(?) 11:50-12:35 Oracle Engineered Systems Strategy-?????????????????????????????????????·???????? ????·????????? ????·??? S1-334/4(?) 15:20-16:05 ??????????????????????????????????????????????????????????? ????????????????? ?? ?? S1-424/4(?) 16:30-17:15 ?????Engineered Systems?????????????IT?????????????? ????????????????? ?? ? K2-014/5(?) 9:30-11:15 Extreme Innovation????·???????? ???????(CEO) ???·???? G2-014/5(?) 11:50-13:20 ??????&???????????IT??????????????·???????? ???????·????????? ???·???? S2-424/5(?) 16:30-17:15 ??UNIX??????????-SPARC SuperCluster?????????? ????????????????? ?? ? S2-534/5(?) 17:40-18:25 Oracle E-Business Suite????????????????????/??????????????????????”SPARC SuperCluster”?????????? ????????????????? ?? ?? S3-134/6(?) 13:00-13:45 ?????SNS??????????????? Sun ZFS Storage Appliance ????????????????? ???????? ?? ?? S3-214/6(?) 14:10-14:55 ???????????????????????????????????????? ???????? ????? ?? ?? ? S3-334/6(?) 15:20-16:05 ????????·????????????????????????????????????????? ???? ?????????? ?? ??(????) ?? ?? ? 1?????????????K1-01?????? ????????????????????????????????????????? ??????????????????? ??????1???????·?????????? ???????Solaris???????????? ???????????????S1-01?Engineered System??????????? S1-33?????????????????????????????????????? S1-42?????????????????????????????????? ???????·?????????K2-01?????????? ?????????????????????????? ???????????????????????????????????? ?????????????????????? ??????????????????????? ??????????????????????????? ????????Engineered System? ??????????????????????????? ??G2-01??????·???????????? ???????????????????????? ??????????????????????? S2-42??????????????? SPARC?????Engineered System???SPARC SuperCluster T4-4????????? ???????????????????????????????? S2-53?????SuperCluster???? ???????????SuperCluster??????????????? ??????????????????????????????????? ????????????Oracle Optimized Solution?????? ?????????Oracle Develop???????? ????????????ZFS Storage Appliance????3????????????? ??????????????????????????????? ?????????????????????????? ???ZFS Storage Appliance???????????????????? ????????????? ???? ?????????????? ??????????????7324????????? (?????????????????? facebook ????????????? ????????????)? ????????????????????????????????????????????

    Read the article

  • GI ????

    - by Allen Gao
    Normal 0 7.8 ? 0 2 false false false MicrosoftInternetExplorer4 classid="clsid:38481807-CA0E-42D2-BF39-B33AF135CC4D" id=ieooui st1\:*{behavior:url(#ieooui) } /* Style Definitions */ table.MsoNormalTable {mso-style-name:????; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman"; mso-ansi-language:#0400; mso-fareast-language:#0400; mso-bidi-language:#0400;} ??????????11gR2 GI ?????????,??????GI????????????????????? ????????GI???????3???,ohasd??,??????,??????? ??,ohasd??? 1. /etc/inittab?????? h1:35:respawn:/etc/init.d/init.ohasd run >/dev/null 2>&1 </dev/null ???,??????? root 4865 1 0 Dec02 ? 00:01:01 /bin/sh /etc/init.d/init.ohasd run ??????????????,???? +init.ohasd ????????? + os????????? + ??S* ohasd????, ??S96ohasd + GI????????(crsctl enable crs) ??,ohasd.bin ??????,????OLR????,??,??ohasd.bin??????,?????OLR??????????????OLR???$GRID_HOME/cdata/${HOSTNAME}.olr 2. ohasd.bin????????agents(orarootagent, oraagent, cssdagnet ? cssdmonitor) ???????????????,?????agent??????,??????????$GRID_HOME/bin ???????????,??,?????????,??corruption. ???,??????? 1. Mdnsd ??????(Multicast)???????????????????,??????????????????????????? 2. Gpnpd ????,??????????bootstrap ??,??????????????gpnp profile???,?????mdnsd??????,???????????,?????????????,??gpnp profile (<gi_home>/gpnp/profiles/peer/profile.xml)?????????? 3. Gipcd ????,????????????????(cluster interconnect)?????,???????gpnpd???,??,??????????,?????gpnpd ??????? 4. Ocssd.bin ?????????????gpnp profile?????????(Voting Disk),????gpnpd ??????????,?????????????,??ocssd.bin ??????,?????????? + gpnp profile ?????????? + gpnpd ??????? + ??????asm disk ??????????? + ??????????? 5. ??????????:ora.ctssd, ora.asm, ora.cluster_interconnect.haip, ora.crf, ora.crsd ?? ??:????????????????ocssd.bin, gpnpd.bin ? gipcd.bin ????,??gpnpd.bin????,ocssd.bin ? gipcd.bin ?????????,?gpnpd.bin????????,ocssd.bin ? gipcd.bin ????????gpnp profile?????????? ??,????????????,?????crsd????????? 1. Crsd?????????????OCR,????OCR????ASM?,???? ASM??????,??OCR???ASM??????????OCR???????,???????????????? 2. Crsd ?????agents(orarootagent, oraagent_<rdbms_owner>, oraagent_<gi_owner> )???agent????,??????????$GRID_HOME/bin ???????????,??,?????????,??corruption. 3. ????????  ora.net1.network : ????,?????????????,scanvip, vip, listener?????????????,??????????,vip, scanvip ?listener ??offline,?????????????? ora.<scan_name>.vip:scan???vip??,?????3?? ora.<node_name>.vip : ?????vip ?? ora.<listener_name>.lsnr: ???????????????,?11gR2??,listener.ora???????,????????? ora.LISTENER_SCAN<n>.lsnr: scan ????? ora.<????>.dg: ASM ????????????????mount???,dismount???? ora.<????>.db: ???????11gR2????????????,??????????rac ????????,??????????,???????“USR_ORA_INST_NAME@SERVERNAME(<node name> )”???????,??????????ASM???,???????????????????,??dependency?????????,??????????????????,???dependancy???????,??????(crsctl modify res ……)? ora.<???>.svc:?????????11gR2 ??,?????????,???10gR2??,???????????,srv ?cs ????? ora.cvu :?????11.2.0.2???,???????cluvfy??,???????????????? ora.ons : ONS??,????????,????? ??,?????GI??????????????????? $GRID_HOME/log/<node_name>/ocssd <== ocssd.bin ?? $GRID_HOME/log/<node_name>/gpnpd <== gpnpd.bin ?? $GRID_HOME/log/<node_name>/gipcd <== gipcd.bin ?? $GRID_HOME/log/<node_name>/agent/crsd <== crsd.bin ?? $GRID_HOME/log/<node_name>/agent/ohasd <== ohasd.bin ?? $GRID_HOME/log/<node_name>/mdnsd <== mdnsd.bin ?? $GRID_HOME/log/<node_name>/client <== ????GI ??(ocrdump, crsctl, ocrcheck, gpnptool??)??????????? $GRID_HOME/log/<node_name>/ctssd <== ctssd.bin ?? $GRID_HOME/log/<node_name>/crsd <== crsd.bin ?? $GRID_HOME/log/<node_name>/cvu <== cluvfy ????????? $GRID_HOME/bin/diagcollection.sh <== ????????????????? ??,????????(/var/tmp/.oracle ? /tmp/.oracle),??????????????????ipc???,??,?????????????????????,???GI?????????????????????,??????????GI??????????????

    Read the article

  • ???????:“Upgrade to Oracle Database 12c”

    - by hamsun
    ? ?:Brandye Barrington,2014?4?29? ??????????????“Upgrade to Oracle Database 12c”,??Oracle????(OCM ) ??????????Gwen Lazenby??????12??????????43?????,Gwen Lazenby? ?????Oracle???? 1Z0-060???????????, ? ?????????????????????,????????? ???????????????,? ?????? ?????????:Upgrade to Oracle Database 12c? ??????????????????????????Kaplan SelfTest? ???? ??????? ????:Upgrade to Oracle Database 12c, ???? ?????????:Upgrade to Oracle Database 12c? ?????????????????????????????Kaplan SelfTest? ???? ? ?????????????: ??0:???? ?? 1:?????????????? ?? 2:?????CDB?PDB ?? 3: ??CDB?PDB ?? 4:???????????????????????(?CDB/PDB? ?? 5:?CDB/PDB????????? ? ?? 6:??????????? ?? 7:??Unicode?EM Express? ???? ?? 8:????????????? ?? 9:????????????? ?? 10: ?? ?? 11:????????? ?? 12: ?? ?? 13:?????????????? ?? 14: Oracle Database 12c??RMAN? ??? ?? 15: ??????? ?? 16:ADR???? ?? 17:Oracle Database 12c?????? ?? 18:?? Oracle? ???? ?? 19: ??Oracle Database 12c  ?? 20:??Oracle? ??? ?? 21: ??????? ?? 22: ???? ?? 23: ???? ?? 24: ?????? ?? 25: ?????? ?? 26: ?? ?? 27: ?? ?? 28: ??????? ?? 29: ? ??????????? ?? 30: ??????? ?? 31: ?????? ?? 32: ???????? ?? 33:??RMAN? ???????? ?? 34: ??RMAN???? ?? 35: ???? ?? 36: ?????? ?? 37: ?????? ?? 38: ???????? ?? 39: ???? ?? 40: ?????? ?? 41:??SQL ? ?????? ?? 42:?????Direct NFS ?? 43:??Oracle Data Pump? ??? ????????Oracle Database Administrator Certified Professional?????Oracle Database 12c,????????????????,???????????,????????????????,?????????? ????,?????????????????? ? ??? ?????: Certification Exam Prep Seminar: Upgrade to Oracle Database 12c ??????????: Exam Prep Seminar Value Package: Upgrade to Oracle Database 12c ????: 1Z0-060 Upgrade to 12c - New Features of Oracle Database 12c ????:Oracle Database 12c Administrator Certified Professional

    Read the article

  • Using a mounted NTFS share with nginx

    - by Hoff
    I have set up a local testing VM with Ubuntu Server 12.04 LTS and the LEMP stack. It's kind of an unconventional setup because instead of having all my PHP scripts on the local machine, I've mounted an NTFS share as the document root because I do my development on Windows. I had everything working perfectly up until this morning, now I keep getting a dreaded 'File not found.' error. I am almost certain this must be somehow permission related, because if I copy my site over to /var/www, nginx and php-fpm have no problems serving my PHP scripts. What I can't figure out is why all of a sudden (after a reboot of the server), no PHP files will be served but instead just the 'File not found.' error. Static files work fine, so I think it's PHP that is causing the headache. Both nginx and php-fpm are configured to run as the user www-data: root@ubuntu-server:~# ps aux | grep 'nginx\|php-fpm' root 1095 0.0 0.0 5816 792 ? Ss 11:11 0:00 nginx: master process /opt/nginx/sbin/nginx -c /etc/nginx/nginx.conf www-data 1096 0.0 0.1 6016 1172 ? S 11:11 0:00 nginx: worker process www-data 1098 0.0 0.1 6016 1172 ? S 11:11 0:00 nginx: worker process root 1130 0.0 0.4 175560 4212 ? Ss 11:11 0:00 php-fpm: master process (/etc/php5/php-fpm.conf) www-data 1131 0.0 0.3 175560 3216 ? S 11:11 0:00 php-fpm: pool www www-data 1132 0.0 0.3 175560 3216 ? S 11:11 0:00 php-fpm: pool www www-data 1133 0.0 0.3 175560 3216 ? S 11:11 0:00 php-fpm: pool www root 1686 0.0 0.0 4368 816 pts/1 S+ 11:11 0:00 grep --color=auto nginx\|php-fpm I have mounted the NTFS share at /mnt/webfiles by editing /etc/fstab and adding the following line: //192.168.0.199/c$/Websites/ /mnt/webfiles cifs username=Jordan,password=mypasswordhere,gid=33,uid=33 0 0 Where gid 33 is the www-data group and uid 33 is the user www-data. If I list the contents of one of my sites you can in fact see that they belong to the user www-data: root@ubuntu-server:~# ls -l /mnt/webfiles/nTv5-2.0 total 8 drwxr-xr-x 0 www-data www-data 0 Jun 6 19:12 app drwxr-xr-x 0 www-data www-data 0 Aug 22 19:00 assets -rwxr-xr-x 0 www-data www-data 1150 Jan 4 2012 favicon.ico -rwxr-xr-x 0 www-data www-data 1412 Dec 28 2011 index.php drwxr-xr-x 0 www-data www-data 0 Jun 3 16:44 lib drwxr-xr-x 0 www-data www-data 0 Jan 3 2012 plugins drwxr-xr-x 0 www-data www-data 0 Jun 3 16:45 vendors If I switch to the www-data user, I have no problem creating a new file on the share: root@ubuntu-server:~# su www-data $ > /mnt/webfiles/test.txt $ ls -l /mnt/webfiles | grep test\.txt -rwxr-xr-x 0 www-data www-data 0 Sep 8 11:19 test.txt There should be no problem reading or writing to the share with php-fpm running as the user www-data. When I examine the error log of nginx, it's filled with a bunch of lines that look like the following: 2012/09/08 11:22:36 [error] 1096#0: *1 FastCGI sent in stderr: "Primary script unknown" while reading response header from upstream, client: 192.168.0.199, server: , request: "GET / HTTP/1.1", upstream: "fastcgi://unix:/var/run/php5-fpm.sock:", host: "192.168.0.123" 2012/09/08 11:22:39 [error] 1096#0: *1 FastCGI sent in stderr: "Primary script unknown" while reading response header from upstream, client: 192.168.0.199, server: , request: "GET /apc.php HTTP/1.1", upstream: "fastcgi://unix:/var/run/php5-fpm.sock:", host: "192.168.0.123" It's bizarre that this was working previously and now all of sudden PHP is complaining that it can't "find" the scripts on the share. Does anybody know why this is happening? EDIT I tried editing php-fpm.conf and changing chdir to the following: chdir = /mnt/webfiles When I try and restart the php-fpm service, I get the error: Starting php-fpm [08-Sep-2012 14:20:55] ERROR: [pool www] the chdir path '/mnt/webfiles' does not exist or is not a directory This is a total load of bullshit because this directory DOES exist and is mounted! Any ls commands to list that directory work perfectly. Why the hell can't PHP-FPM see this directory?! Here are my configuration files for reference: nginx.conf user www-data; worker_processes 2; error_log /var/log/nginx/nginx.log info; pid /var/run/nginx.pid; events { worker_connections 1024; multi_accept on; } http { include fastcgi.conf; include mime.types; default_type application/octet-stream; set_real_ip_from 127.0.0.1; real_ip_header X-Forwarded-For; ## Proxy proxy_redirect off; proxy_set_header Host $host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; client_max_body_size 32m; client_body_buffer_size 128k; proxy_connect_timeout 90; proxy_send_timeout 90; proxy_read_timeout 90; proxy_buffers 32 4k; ## Compression gzip on; gzip_types text/plain text/css application/x-javascript text/xml application/xml application/xml+rss text/javascript; gzip_disable "MSIE [1-6]\.(?!.*SV1)"; ### TCP options tcp_nodelay on; tcp_nopush on; keepalive_timeout 65; sendfile on; include /etc/nginx/sites-enabled/*; } my site config server { listen 80; access_log /var/log/nginx/$host.access.log; error_log /var/log/nginx/error.log; root /mnt/webfiles/nTv5-2.0/app/webroot; index index.php; ## Block bad bots if ($http_user_agent ~* (HTTrack|HTMLParser|libcurl|discobot|Exabot|Casper|kmccrew|plaNETWORK|RPT-HTTPClient)) { return 444; } ## Block certain Referers (case insensitive) if ($http_referer ~* (sex|vigra|viagra) ) { return 444; } ## Deny dot files: location ~ /\. { deny all; } ## Favicon Not Found location = /favicon.ico { access_log off; log_not_found off; } ## Robots.txt Not Found location = /robots.txt { access_log off; log_not_found off; } if (-f $document_root/maintenance.html) { rewrite ^(.*)$ /maintenance.html last; } location ~* \.(?:ico|css|js|gif|jpe?g|png)$ { # Some basic cache-control for static files to be sent to the browser expires max; add_header Pragma public; add_header Cache-Control "max-age=2678400, public, must-revalidate"; } location / { try_files $uri $uri/ index.php; if (-f $request_filename) { break; } rewrite ^(.+)$ /index.php?url=$1 last; } location ~ \.php$ { include /etc/nginx/fastcgi.conf; fastcgi_pass unix:/var/run/php5-fpm.sock; } } php-fpm.conf ;;;;;;;;;;;;;;;;;;;;; ; FPM Configuration ; ;;;;;;;;;;;;;;;;;;;;; ; All relative paths in this configuration file are relative to PHP's install ; prefix (/opt/php5). This prefix can be dynamicaly changed by using the ; '-p' argument from the command line. ; Include one or more files. If glob(3) exists, it is used to include a bunch of ; files from a glob(3) pattern. This directive can be used everywhere in the ; file. ; Relative path can also be used. They will be prefixed by: ; - the global prefix if it's been set (-p arguement) ; - /opt/php5 otherwise ;include=etc/fpm.d/*.conf ;;;;;;;;;;;;;;;;;; ; Global Options ; ;;;;;;;;;;;;;;;;;; [global] ; Pid file ; Note: the default prefix is /opt/php5/var ; Default Value: none pid = /var/run/php-fpm.pid ; Error log file ; Note: the default prefix is /opt/php5/var ; Default Value: log/php-fpm.log error_log = /var/log/php5-fpm/php-fpm.log ; Log level ; Possible Values: alert, error, warning, notice, debug ; Default Value: notice ;log_level = notice ; If this number of child processes exit with SIGSEGV or SIGBUS within the time ; interval set by emergency_restart_interval then FPM will restart. A value ; of '0' means 'Off'. ; Default Value: 0 ;emergency_restart_threshold = 0 ; Interval of time used by emergency_restart_interval to determine when ; a graceful restart will be initiated. This can be useful to work around ; accidental corruptions in an accelerator's shared memory. ; Available Units: s(econds), m(inutes), h(ours), or d(ays) ; Default Unit: seconds ; Default Value: 0 ;emergency_restart_interval = 0 ; Time limit for child processes to wait for a reaction on signals from master. ; Available units: s(econds), m(inutes), h(ours), or d(ays) ; Default Unit: seconds ; Default Value: 0 ;process_control_timeout = 0 ; Send FPM to background. Set to 'no' to keep FPM in foreground for debugging. ; Default Value: yes ;daemonize = yes ;;;;;;;;;;;;;;;;;;;; ; Pool Definitions ; ;;;;;;;;;;;;;;;;;;;; ; Multiple pools of child processes may be started with different listening ; ports and different management options. The name of the pool will be ; used in logs and stats. There is no limitation on the number of pools which ; FPM can handle. Your system will tell you anyway :) ; Start a new pool named 'www'. ; the variable $pool can we used in any directive and will be replaced by the ; pool name ('www' here) [www] ; Per pool prefix ; It only applies on the following directives: ; - 'slowlog' ; - 'listen' (unixsocket) ; - 'chroot' ; - 'chdir' ; - 'php_values' ; - 'php_admin_values' ; When not set, the global prefix (or /opt/php5) applies instead. ; Note: This directive can also be relative to the global prefix. ; Default Value: none ;prefix = /path/to/pools/$pool ; The address on which to accept FastCGI requests. ; Valid syntaxes are: ; 'ip.add.re.ss:port' - to listen on a TCP socket to a specific address on ; a specific port; ; 'port' - to listen on a TCP socket to all addresses on a ; specific port; ; '/path/to/unix/socket' - to listen on a unix socket. ; Note: This value is mandatory. ;listen = 127.0.0.1:9000 listen = /var/run/php5-fpm.sock ; Set listen(2) backlog. A value of '-1' means unlimited. ; Default Value: 128 (-1 on FreeBSD and OpenBSD) ;listen.backlog = -1 ; List of ipv4 addresses of FastCGI clients which are allowed to connect. ; Equivalent to the FCGI_WEB_SERVER_ADDRS environment variable in the original ; PHP FCGI (5.2.2+). Makes sense only with a tcp listening socket. Each address ; must be separated by a comma. If this value is left blank, connections will be ; accepted from any ip address. ; Default Value: any ;listen.allowed_clients = 127.0.0.1 ; Set permissions for unix socket, if one is used. In Linux, read/write ; permissions must be set in order to allow connections from a web server. Many ; BSD-derived systems allow connections regardless of permissions. ; Default Values: user and group are set as the running user ; mode is set to 0666 ;listen.owner = www-data ;listen.group = www-data ;listen.mode = 0666 ; Unix user/group of processes ; Note: The user is mandatory. If the group is not set, the default user's group ; will be used. user = www-data group = www-data ; Choose how the process manager will control the number of child processes. ; Possible Values: ; static - a fixed number (pm.max_children) of child processes; ; dynamic - the number of child processes are set dynamically based on the ; following directives: ; pm.max_children - the maximum number of children that can ; be alive at the same time. ; pm.start_servers - the number of children created on startup. ; pm.min_spare_servers - the minimum number of children in 'idle' ; state (waiting to process). If the number ; of 'idle' processes is less than this ; number then some children will be created. ; pm.max_spare_servers - the maximum number of children in 'idle' ; state (waiting to process). If the number ; of 'idle' processes is greater than this ; number then some children will be killed. ; Note: This value is mandatory. pm = dynamic ; The number of child processes to be created when pm is set to 'static' and the ; maximum number of child processes to be created when pm is set to 'dynamic'. ; This value sets the limit on the number of simultaneous requests that will be ; served. Equivalent to the ApacheMaxClients directive with mpm_prefork. ; Equivalent to the PHP_FCGI_CHILDREN environment variable in the original PHP ; CGI. ; Note: Used when pm is set to either 'static' or 'dynamic' ; Note: This value is mandatory. pm.max_children = 50 ; The number of child processes created on startup. ; Note: Used only when pm is set to 'dynamic' ; Default Value: min_spare_servers + (max_spare_servers - min_spare_servers) / 2 pm.start_servers = 20 ; The desired minimum number of idle server processes. ; Note: Used only when pm is set to 'dynamic' ; Note: Mandatory when pm is set to 'dynamic' pm.min_spare_servers = 5 ; The desired maximum number of idle server processes. ; Note: Used only when pm is set to 'dynamic' ; Note: Mandatory when pm is set to 'dynamic' pm.max_spare_servers = 35 ; The number of requests each child process should execute before respawning. ; This can be useful to work around memory leaks in 3rd party libraries. For ; endless request processing specify '0'. Equivalent to PHP_FCGI_MAX_REQUESTS. ; Default Value: 0 pm.max_requests = 500 ; The URI to view the FPM status page. If this value is not set, no URI will be ; recognized as a status page. By default, the status page shows the following ; information: ; accepted conn - the number of request accepted by the pool; ; pool - the name of the pool; ; process manager - static or dynamic; ; idle processes - the number of idle processes; ; active processes - the number of active processes; ; total processes - the number of idle + active processes. ; max children reached - number of times, the process limit has been reached, ; when pm tries to start more children (works only for ; pm 'dynamic') ; The values of 'idle processes', 'active processes' and 'total processes' are ; updated each second. The value of 'accepted conn' is updated in real time. ; Example output: ; accepted conn: 12073 ; pool: www ; process manager: static ; idle processes: 35 ; active processes: 65 ; total processes: 100 ; max children reached: 1 ; By default the status page output is formatted as text/plain. Passing either ; 'html' or 'json' as a query string will return the corresponding output ; syntax. Example: ; http://www.foo.bar/status ; http://www.foo.bar/status?json ; http://www.foo.bar/status?html ; Note: The value must start with a leading slash (/). The value can be ; anything, but it may not be a good idea to use the .php extension or it ; may conflict with a real PHP file. ; Default Value: not set pm.status_path = /status ; The ping URI to call the monitoring page of FPM. If this value is not set, no ; URI will be recognized as a ping page. This could be used to test from outside ; that FPM is alive and responding, or to ; - create a graph of FPM availability (rrd or such); ; - remove a server from a group if it is not responding (load balancing); ; - trigger alerts for the operating team (24/7). ; Note: The value must start with a leading slash (/). The value can be ; anything, but it may not be a good idea to use the .php extension or it ; may conflict with a real PHP file. ; Default Value: not set ping.path = /ping ; This directive may be used to customize the response of a ping request. The ; response is formatted as text/plain with a 200 response code. ; Default Value: pong ping.response = pong ; The timeout for serving a single request after which the worker process will ; be killed. This option should be used when the 'max_execution_time' ini option ; does not stop script execution for some reason. A value of '0' means 'off'. ; Available units: s(econds)(default), m(inutes), h(ours), or d(ays) ; Default Value: 0 ;request_terminate_timeout = 0 ; The timeout for serving a single request after which a PHP backtrace will be ; dumped to the 'slowlog' file. A value of '0s' means 'off'. ; Available units: s(econds)(default), m(inutes), h(ours), or d(ays) ; Default Value: 0 ;request_slowlog_timeout = 0 ; The log file for slow requests ; Default Value: not set ; Note: slowlog is mandatory if request_slowlog_timeout is set ;slowlog = log/$pool.log.slow ; Set open file descriptor rlimit. ; Default Value: system defined value ;rlimit_files = 1024 ; Set max core size rlimit. ; Possible Values: 'unlimited' or an integer greater or equal to 0 ; Default Value: system defined value ;rlimit_core = 0 ; Chroot to this directory at the start. This value must be defined as an ; absolute path. When this value is not set, chroot is not used. ; Note: you can prefix with '$prefix' to chroot to the pool prefix or one ; of its subdirectories. If the pool prefix is not set, the global prefix ; will be used instead. ; Note: chrooting is a great security feature and should be used whenever ; possible. However, all PHP paths will be relative to the chroot ; (error_log, sessions.save_path, ...). ; Default Value: not set ;chroot = ; Chdir to this directory at the start. ; Note: relative path can be used. ; Default Value: current directory or / when chroot ;chdir = /var/www ; Redirect worker stdout and stderr into main error log. If not set, stdout and ; stderr will be redirected to /dev/null according to FastCGI specs. ; Note: on highloaded environement, this can cause some delay in the page ; process time (several ms). ; Default Value: no ;catch_workers_output = yes ; Pass environment variables like LD_LIBRARY_PATH. All $VARIABLEs are taken from ; the current environment. ; Default Value: clean env ;env[HOSTNAME] = $HOSTNAME ;env[PATH] = /usr/local/bin:/usr/bin:/bin ;env[TMP] = /tmp ;env[TMPDIR] = /tmp ;env[TEMP] = /tmp ; Additional php.ini defines, specific to this pool of workers. These settings ; overwrite the values previously defined in the php.ini. The directives are the ; same as the PHP SAPI: ; php_value/php_flag - you can set classic ini defines which can ; be overwritten from PHP call 'ini_set'. ; php_admin_value/php_admin_flag - these directives won't be overwritten by ; PHP call 'ini_set' ; For php_*flag, valid values are on, off, 1, 0, true, false, yes or no. ; Defining 'extension' will load the corresponding shared extension from ; extension_dir. Defining 'disable_functions' or 'disable_classes' will not ; overwrite previously defined php.ini values, but will append the new value ; instead. ; Note: path INI options can be relative and will be expanded with the prefix ; (pool, global or /opt/php5) ; Default Value: nothing is defined by default except the values in php.ini and ; specified at startup with the -d argument ;php_admin_value[sendmail_path] = /usr/sbin/sendmail -t -i -f [email protected] ;php_flag[display_errors] = off ;php_admin_value[error_log] = /var/log/fpm-php.www.log ;php_admin_flag[log_errors] = on ;php_admin_value[memory_limit] = 32M php_admin_value[sendmail_path] = /usr/sbin/sendmail -t -i

    Read the article

  • Getting output parameter(SYS_REFCURSOR) from Oracle stored procedure in iBATIS 3(by using annotation

    - by yjacket
    I got an example how to call oracle SP in iBATIS 3 without a map file. And now I understand how to call it. But I got another problem that how to get a result from output parameter(Oracle cursor). A part of exception messages is "There is no setter for property named 'rs' in 'class java.lang.Class". Below is my code. Does anyone can help me? Oracle Stored Procedure: CREATE OR REPLACE PROCEDURE getProducts ( rs OUT SYS_REFCURSOR ) IS BEGIN OPEN rs FOR SELECT * FROM Products; END getProducts; Interface: public interface ProductMapper { @Select("call getProducts(#{rs,mode=OUT,jdbcType=CURSOR})") @Options(statementType = StatementType.CALLABLE) List<Product> getProducts(); } DAO: public class ProductDAO { public List<Product> getProducts() { return mapper.getProducts(); // mapper is ProductMapper } } Full Error Message: Exception in thread "main" org.apache.ibatis.exceptions.IbatisException: ### Error querying database. Cause: org.apache.ibatis.reflection.ReflectionException: Could not set property 'rs' of 'class org.apache.ibatis.reflection.MetaObject$NullObject' with value 'oracle.jdbc.driver.OracleResultSetImpl@1a001ff' Cause: org.apache.ibatis.reflection.ReflectionException: There is no setter for property named 'rs' in 'class java.lang.Class' ### The error may involve defaultParameterMap ### The error occurred while setting parameters ### Cause: org.apache.ibatis.reflection.ReflectionException: Could not set property 'rs' of 'class org.apache.ibatis.reflection.MetaObject$NullObject' with value 'oracle.jdbc.driver.OracleResultSetImpl@1a001ff' Cause: org.apache.ibatis.reflection.ReflectionException: There is no setter for property named 'rs' in 'class java.lang.Class' at org.apache.ibatis.exceptions.ExceptionFactory.wrapException(ExceptionFactory.java:8) at org.apache.ibatis.session.defaults.DefaultSqlSession.selectList(DefaultSqlSession.java:61) at org.apache.ibatis.session.defaults.DefaultSqlSession.selectList(DefaultSqlSession.java:53) at org.apache.ibatis.binding.MapperMethod.executeForList(MapperMethod.java:82) at org.apache.ibatis.binding.MapperMethod.execute(MapperMethod.java:63) at org.apache.ibatis.binding.MapperProxy.invoke(MapperProxy.java:35) at $Proxy8.getList(Unknown Source) at com.dao.ProductDAO.getList(ProductDAO.java:42) at com.Ibatis3Test.main(Ibatis3Test.java:30) Caused by: org.apache.ibatis.reflection.ReflectionException: Could not set property 'rs' of 'class org.apache.ibatis.reflection.MetaObject$NullObject' with value 'oracle.jdbc.driver.OracleResultSetImpl@1a001ff' Cause: org.apache.ibatis.reflection.ReflectionException: There is no setter for property named 'rs' in 'class java.lang.Class' at org.apache.ibatis.reflection.wrapper.BeanWrapper.setBeanProperty(BeanWrapper.java:154) at org.apache.ibatis.reflection.wrapper.BeanWrapper.set(BeanWrapper.java:36) at org.apache.ibatis.reflection.MetaObject.setValue(MetaObject.java:120) at org.apache.ibatis.executor.resultset.FastResultSetHandler.handleOutputParameters(FastResultSetHandler.java:69) at org.apache.ibatis.executor.statement.CallableStatementHandler.query(CallableStatementHandler.java:44) at org.apache.ibatis.executor.statement.RoutingStatementHandler.query(RoutingStatementHandler.java:55) at org.apache.ibatis.executor.SimpleExecutor.doQuery(SimpleExecutor.java:41) at org.apache.ibatis.executor.BaseExecutor.query(BaseExecutor.java:94) at org.apache.ibatis.executor.CachingExecutor.query(CachingExecutor.java:72) at org.apache.ibatis.session.defaults.DefaultSqlSession.selectList(DefaultSqlSession.java:59) ... 7 more Caused by: org.apache.ibatis.reflection.ReflectionException: There is no setter for property named 'rs' in 'class java.lang.Class' at org.apache.ibatis.reflection.Reflector.getSetInvoker(Reflector.java:300) at org.apache.ibatis.reflection.MetaClass.getSetInvoker(MetaClass.java:97) at org.apache.ibatis.reflection.wrapper.BeanWrapper.setBeanProperty(BeanWrapper.java:146) ... 16 more

    Read the article

  • Problem with waitable timers in Windows (timeSetEvent and CreateTimerQueueTimer)

    - by MusiGenesis
    I need high-resolution (more accurate than 1 millisecond) timing in my application. The waitable timers in Windows are (or can be made) accurate to the millisecond, but if I need a precise periodicity of, say, 35.7142857141 milliseconds, even a waitable timer with a 36 ms period will drift out of sync quickly. My "solution" to this problem (in ironic quotes because it's not working quite right) is to use a series of one-shot timers where I use the expiration of each timer to call the next timer. Normally a process like this would be subject to cumulative error over time, but in each timer callback I check the current time (with System.Diagnostics.Stopwatch) and use this to calculate what the period of the next timer needs to be (so if a timer happens to expire a little late, the next timer will automagically have a shorter period to compensate). This works as expected, except that after maybe 10-15 seconds the timer system seems to get bogged down, and a few timer callbacks here and there arrive anywhere from 25 to 100 milliseconds late. After a couple of seconds the problem goes away and everything runs smoothly again for 10-15 seconds, and then the stuttering again. Since I'm using Stopwatch to set each timer period, I'm also using it to monitor the arrival times of each timer callback. During the smooth-running periods, most (maybe 95%) of the intervals are either 35 or 36 milliseconds, and no intervals are ever more than 5 milliseconds away from the expected 35.7142857143. During the "glitchy" stretches, the distribution of intervals is very nearly identical, except that a very small number are unusually large (a couple more than 60 ms and one or two longer than 100 ms during maybe a 3-second stretch). This stuttering is very noticeable, and it's what I'm trying to fix, if possible. For the high-resolution timer, I was using the extremely antique timeSetEvent() multimedia timer from winmm.dll. In pursuit of this problem, I switched to using CreateTimerQueueTimer (along with timeBeginPeriod to set the high-resolution), but I'm seeing the same problem with both timer mechanisms. I've tried experimenting with the various flags for CreateTimerQueueTimer which determine which thread the timer runs on, but the stuttering appears no matter what. Is this just a fundamental problem with using timers in this way (i.e. using each one-shot timer to call the next)? If so, do I have any alternatives? One thing I was considering was to determine how many consecutive 1-millisecond-accuracy ticks would keep my within some arbitrary precision limit before I need to reset the timer. So, for example, if I wanted a 35.71428 period, I could let a 36 ms timer elapse 15 times before it was off by 5 milliseconds, then kill it and start a new one.

    Read the article

  • WSDLException : An error occurred trying to resolve schema referenced at ...

    - by Stefano
    Hello i'm trying to generate a proxy class from a local wsdl file with eclipse Galileo and axis 2 1.4 on windows xp . My problem is that i get an error due to an imported schema inside the wsdl . The line tha troubles me is : <xsd:import namespace="http://www.w3.org/2005/05/xmlmime" schemaLocation="http://www.w3.org/2005/05/xmlmime"/> i've tried to run the wsdl2java following command: wsdl2java.bat -uri SOAService.wsdl -o D:\temp p test -d xmlbeans -a -s -ns2p -uw and i get the following exception : Exception in thread "main" org.apache.axis2.wsdl.codegen.CodeGenerationException : Error parsing WSDL at org.apache.axis2.wsdl.codegen.CodeGenerationEngine.(CodeGenerat ionEngine.java:156) at org.apache.axis2.wsdl.WSDL2Code.main(WSDL2Code.java:35) at org.apache.axis2.wsdl.WSDL2Java.main(WSDL2Java.java:24) Caused by: javax.wsdl.WSDLException: WSDLException (at /wsdl:definitions/wsdl:ty pes/xsd:schema): faultCode=OTHER_ERROR: An error occurred trying to resolve sche ma referenced at 'http://www.w3.org/2005/05/xmlmime', relative to 'file:/D:/Prog rammi/axis2-1.4/bin/SOAService.wsdl'.: java.net.ConnectException: Connection tim ed out: connect at com.ibm.wsdl.xml.WSDLReaderImpl.parseSchema(Unknown Source) at com.ibm.wsdl.xml.WSDLReaderImpl.parseSchema(Unknown Source) at com.ibm.wsdl.xml.WSDLReaderImpl.parseTypes(Unknown Source) at com.ibm.wsdl.xml.WSDLReaderImpl.parseDefinitions(Unknown Source) at com.ibm.wsdl.xml.WSDLReaderImpl.readWSDL(Unknown Source) at com.ibm.wsdl.xml.WSDLReaderImpl.readWSDL(Unknown Source) at com.ibm.wsdl.xml.WSDLReaderImpl.readWSDL(Unknown Source) at com.ibm.wsdl.xml.WSDLReaderImpl.readWSDL(Unknown Source) at com.ibm.wsdl.xml.WSDLReaderImpl.readWSDL(Unknown Source) at org.apache.axis2.wsdl.codegen.CodeGenerationEngine.readInTheWSDLFile( CodeGenerationEngine.java:288) at org.apache.axis2.wsdl.codegen.CodeGenerationEngine.(CodeGenerat ionEngine.java:111) ... 2 more Caused by: java.net.ConnectException: Connection timed out: connect at java.net.PlainSocketImpl.socketConnect(Native Method) at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333) at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195) at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182) at java.net.Socket.connect(Socket.java:520) at java.net.Socket.connect(Socket.java:470) at sun.net.NetworkClient.doConnect(NetworkClient.java:157) at sun.net.www.http.HttpClient.openServer(HttpClient.java:388) at sun.net.www.http.HttpClient.openServer(HttpClient.java:523) at sun.net.www.http.HttpClient.(HttpClient.java:231) at sun.net.www.http.HttpClient.New(HttpClient.java:304) at sun.net.www.http.HttpClient.New(HttpClient.java:321) at sun.net.www.protocol.http.HttpURLConnection.getNewHttpClient(HttpURLC onnection.java:813) at sun.net.www.protocol.http.HttpURLConnection.plainConnect(HttpURLConne ction.java:765) at sun.net.www.protocol.http.HttpURLConnection.connect(HttpURLConnection .java:690) at sun.net.www.protocol.http.HttpURLConnection.getInputStream(HttpURLCon nection.java:934) at java.net.URL.openStream(URL.java:1007) at com.ibm.wsdl.util.StringUtils.getContentAsInputStream(Unknown Source) i suspect it's due to the system proxy which doesn't let retrieve the xsd to the wsdl2java tool. In fact i can download the file from the browser without problems. There's an option to specify a proxy to wsdl2java or someone has resolved this issue ? For the moment i've downloaded the xsd, added it to the project and changed the wsdl to include the relative file (instead of the remote one) , but i'd prefer to avoid this , because the file is a third party service wsdl. thank you in advance for any hint Stefano

    Read the article

  • Overlay bitmap on live video

    - by sijith
    Hi i want to Overlay bitmap on live video. Iam trying to do this with the directshow sample. I edited PlayCapMonker sample and added some functions to enable this. i did this with the procedure explained in below link http://www.ureader.com/msg/1471251.aspx Now i am gettting errors Error 2 error C4430: missing type specifier - int assumed. Note: C++ does not support default-int Error 3 error C4430: missing type specifier - int assumed. Note: C++ does not support default-int Error 5 error C4430: missing type specifier - int assumed. Note: C++ does not support default-int Error 6 error C4430: missing type specifier - int assumed. Note: C++ does not support default-int Error 8 error C4430: missing type specifier - int assumed. Note: C++ does not support default-int Error 9 error C4430: missing type specifier - int assumed. Note: C++ does not support default-int Error 21 error C4430: missing type specifier - int assumed. Note: C++ does not support default-int Error 22 error C4430: missing type specifier - int assumed. Note: C++ does not support default-int Error 26 error C4430: missing type specifier - int assumed. Note: C++ does not support default-int Error 27 error C4430: missing type specifier - int assumed. Note: C++ does not support default-int Error 36 error C2228: left of '.m_alpha' must have class/struct/union Error 38 error C2227: left of '-SetAlphaBitmap' must point to class/struct/union/generic type Error 7 error C2146: syntax error : missing ';' before identifier 'Pool' Error 4 error C2146: syntax error : missing ';' before identifier 'Format' c:\Program Files\Microsoft Platform SDK\include\Vmr9.h 368 PlayCapMoniker Error 1 error C2143: syntax error : missing ';' before '' Error 20 error C2143: syntax error : missing ';' before '' Error 25 error C2143: syntax error : missing ';' before '*' Error 30 error C2065: 'g_pMixerBitmap' : undeclared identifier Error 33 error C2065: 'g_pMixerBitmap' : undeclared identifier Error 37 error C2065: 'g_pMixerBitmap' : undeclared identifier Error 31 error C2065: 'g_hbm' : undeclared identifier Error 32 error C2065: 'g_hbm' : undeclared identifier Error 35 error C2065: 'config' : undeclared identifier Error 10 error C2061: syntax error : identifier 'IDirect3DSurface9' Error 11 error C2061: syntax error : identifier 'IDirect3DSurface9' Error 12 error C2061: syntax error : identifier 'IDirect3DSurface9' Error 13 error C2061: syntax error : identifier 'IDirect3DSurface9' Error 16 error C2061: syntax error : identifier 'IDirect3DSurface9' Error 19 error C2061: syntax error : identifier 'IDirect3DSurface9' Error 23 error C2061: syntax error : identifier 'IDirect3DSurface9' Error 24 error C2061: syntax error : identifier 'IDirect3DSurface9' Error 28 error C2061: syntax error : identifier 'IDirect3DSurface9' Error 29 error C2061: syntax error : identifier 'IDirect3DSurface9' Error 14 error C2061: syntax error : identifier 'IDirect3DDevice9' Error 15 error C2061: syntax error : identifier 'IDirect3DDevice9' Error 17 error C2061: syntax error : identifier 'IDirect3DDevice9' Error 18 error C2061: syntax error : identifier 'IDirect3DDevice9' Error 34 error C2039: 'pDDS' : is not a member of '_VMR9AlphaBitmap' SDK\Samples\Multimedia\DirectShow\Capture\PlayCapMoniker\PlayCapMoniker.cpp 263 PlayCapMoniker

    Read the article

  • How to get a result from output parameter(SYS_REFCURSOR) of Oracle stored procedure in iBATIS 3(by u

    - by yjacket
    I got an example how to call oracle SP in iBATIS 3 without a map file. And now I understand how to call it. But I got another problem that how to get a result from output parameter(Oracle cursor). A part of exception messages is "There is no setter for property named 'rs' in 'class java.lang.Class". Below is my code. Does anyone can help me? Oracle Stored Procedure: CREATE OR REPLACE PROCEDURE getProducts ( rs OUT SYS_REFCURSOR ) IS BEGIN OPEN rs FOR SELECT * FROM Products; END getProducts; Interface: public interface ProductMapper { @Select("call getProducts(#{rs,mode=OUT,jdbcType=CURSOR})") @Options(statementType = StatementType.CALLABLE) List<Product> getProducts(); } DAO: public class ProductDAO { public List<Product> getProducts() { return mapper.getProducts(); // mapper is ProductMapper } } Full Error Message: Exception in thread "main" org.apache.ibatis.exceptions.IbatisException: ### Error querying database. Cause: org.apache.ibatis.reflection.ReflectionException: Could not set property 'rs' of 'class org.apache.ibatis.reflection.MetaObject$NullObject' with value 'oracle.jdbc.driver.OracleResultSetImpl@1a001ff' Cause: org.apache.ibatis.reflection.ReflectionException: There is no setter for property named 'rs' in 'class java.lang.Class' ### The error may involve defaultParameterMap ### The error occurred while setting parameters ### Cause: org.apache.ibatis.reflection.ReflectionException: Could not set property 'rs' of 'class org.apache.ibatis.reflection.MetaObject$NullObject' with value 'oracle.jdbc.driver.OracleResultSetImpl@1a001ff' Cause: org.apache.ibatis.reflection.ReflectionException: There is no setter for property named 'rs' in 'class java.lang.Class' at org.apache.ibatis.exceptions.ExceptionFactory.wrapException(ExceptionFactory.java:8) at org.apache.ibatis.session.defaults.DefaultSqlSession.selectList(DefaultSqlSession.java:61) at org.apache.ibatis.session.defaults.DefaultSqlSession.selectList(DefaultSqlSession.java:53) at org.apache.ibatis.binding.MapperMethod.executeForList(MapperMethod.java:82) at org.apache.ibatis.binding.MapperMethod.execute(MapperMethod.java:63) at org.apache.ibatis.binding.MapperProxy.invoke(MapperProxy.java:35) at $Proxy8.getList(Unknown Source) at com.dao.ProductDAO.getList(ProductDAO.java:42) at com.Ibatis3Test.main(Ibatis3Test.java:30) Caused by: org.apache.ibatis.reflection.ReflectionException: Could not set property 'rs' of 'class org.apache.ibatis.reflection.MetaObject$NullObject' with value 'oracle.jdbc.driver.OracleResultSetImpl@1a001ff' Cause: org.apache.ibatis.reflection.ReflectionException: There is no setter for property named 'rs' in 'class java.lang.Class' at org.apache.ibatis.reflection.wrapper.BeanWrapper.setBeanProperty(BeanWrapper.java:154) at org.apache.ibatis.reflection.wrapper.BeanWrapper.set(BeanWrapper.java:36) at org.apache.ibatis.reflection.MetaObject.setValue(MetaObject.java:120) at org.apache.ibatis.executor.resultset.FastResultSetHandler.handleOutputParameters(FastResultSetHandler.java:69) at org.apache.ibatis.executor.statement.CallableStatementHandler.query(CallableStatementHandler.java:44) at org.apache.ibatis.executor.statement.RoutingStatementHandler.query(RoutingStatementHandler.java:55) at org.apache.ibatis.executor.SimpleExecutor.doQuery(SimpleExecutor.java:41) at org.apache.ibatis.executor.BaseExecutor.query(BaseExecutor.java:94) at org.apache.ibatis.executor.CachingExecutor.query(CachingExecutor.java:72) at org.apache.ibatis.session.defaults.DefaultSqlSession.selectList(DefaultSqlSession.java:59) ... 7 more Caused by: org.apache.ibatis.reflection.ReflectionException: There is no setter for property named 'rs' in 'class java.lang.Class' at org.apache.ibatis.reflection.Reflector.getSetInvoker(Reflector.java:300) at org.apache.ibatis.reflection.MetaClass.getSetInvoker(MetaClass.java:97) at org.apache.ibatis.reflection.wrapper.BeanWrapper.setBeanProperty(BeanWrapper.java:146) ... 16 more

    Read the article

  • Eclipse Galileo won't start after OS X update to 10.6.3

    - by GC
    Hi All, I have just updated os x to 10.6.3 and no Eclipse won't start the logs show the following error, but I can't figure it out. Can anyone shed any light? !SESSION 2010-03-30 10:06:38.244 ----------------------------------------------- eclipse.buildId=M20090917-0800 java.version=1.6.0_17 java.vendor=Apple Inc. BootLoader constants: OS=macosx, ARCH=x86, WS=cocoa, NL=en_US Framework arguments: -product org.eclipse.epp.package.php.product -keyring /Users/gav/.eclipse_keyring -showlocation Command-line arguments: -os macosx -ws cocoa -arch x86 -product org.eclipse.epp.package.php.product -keyring /Users/gav/.eclipse_keyring -showlocation !ENTRY org.eclipse.ui.workbench 2 0 2010-03-30 10:06:40.139 !MESSAGE A handler conflict occurred. This may disable some commands. !SUBENTRY 1 org.eclipse.ui.workbench 2 0 2010-03-30 10:06:40.139 !MESSAGE Conflict for 'com.aptana.ide.editors.views.actions.actionKeyCommand': HandlerActivation(commandId=com.aptana.ide.editors.views.actions.actionKeyCommand, handler=com.aptana.ide.editors.views.actions.ActionKeyCommandHandler, expression=,sourcePriority=0) HandlerActivation(commandId=com.aptana.ide.editors.views.actions.actionKeyCommand, handler=com.aptana.ide.editors.views.actions.ActionKeyCommandHandler, expression=,sourcePriority=0) !ENTRY org.eclipse.ui 4 0 2010-03-30 10:06:40.964 !MESSAGE Unhandled event loop exception !STACK 0 java.lang.NullPointerException at org.eclipse.swt.graphics.Device.getFontList(Device.java:369) at org.eclipse.jface.resource.FontRegistry.filterData(FontRegistry.java:465) at org.eclipse.jface.resource.FontRegistry.createFont(FontRegistry.java:499) at org.eclipse.jface.resource.FontRegistry.defaultFontRecord(FontRegistry.java:563) at org.eclipse.jface.resource.FontRegistry.defaultFontData(FontRegistry.java:575) at org.eclipse.jface.resource.FontRegistry.getFontData(FontRegistry.java:591) at org.eclipse.ui.internal.themes.ThemeElementHelper.installFont(ThemeElementHelper.java:116) at org.eclipse.ui.internal.themes.ThemeElementHelper.populateRegistry(ThemeElementHelper.java:59) at org.eclipse.ui.internal.Workbench$33.runWithException(Workbench.java:1482) at org.eclipse.ui.internal.StartupThreading$StartupRunnable.run(StartupThreading.java:31) at org.eclipse.swt.widgets.RunnableLock.run(RunnableLock.java:35) at org.eclipse.swt.widgets.Synchronizer.runAsyncMessages(Synchronizer.java:134) at org.eclipse.swt.widgets.Display.runAsyncMessages(Display.java:3405) at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3102) at org.eclipse.ui.internal.Workbench.runUI(Workbench.java:2316) at org.eclipse.ui.internal.Workbench.access$4(Workbench.java:2221) at org.eclipse.ui.internal.Workbench$5.run(Workbench.java:500) at org.eclipse.core.databinding.observable.Realm.runWithDefault(Realm.java:332) at org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:493) at org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:149) at org.eclipse.ui.internal.ide.application.IDEApplication.start(IDEApplication.java:113) at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:194) at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLauncher.java:110) at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.java:79) at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:368) at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:179) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:559) at org.eclipse.equinox.launcher.Main.basicRun(Main.java:514) at org.eclipse.equinox.launcher.Main.run(Main.java:1311) It looks like the update may have upgraded the Java version, possibly :S but I don't know if this can be rolled back even if it did update it. java version "1.6.0_17" Java(TM) SE Runtime Environment (build 1.6.0_17-b04-248-10M3025) Java HotSpot(TM) 64-Bit Server VM (build 14.3-b01-101, mixed mode) Thanks in advance!

    Read the article

< Previous Page | 82 83 84 85 86 87 88 89 90 91 92 93  | Next Page >