Search Results

Search found 5121 results on 205 pages for 'dotnetnuke connections'.

Page 88/205 | < Previous Page | 84 85 86 87 88 89 90 91 92 93 94 95  | Next Page >

• Manually activate Network Manager Applet

  - by diosney

  The issue I've is that when I connect via modem through gnome-ppp the Network Manager Applet don't detect a connection and don't let me use the configured VPNs via its interface. How Can I manually activate the Network Manager Applet? What I need is to enable the Network Manager apple in order to use the "VPN Connection" section of the GUI. When I don't have an ethernet cable connected and I connect through a modem the Network Manager applet doesn't enables itself, it is like if don't recognizes the ppp0 interface. My question is: there is a way to force the Network Manager GUI indicator to make it "alive"/"up"/"enabled" in order to use the "VPN Connections"section? Thanks in advance.

  Read the article

• WinTV-HVR-1900 no picture in VLC

  - by nLinked

  I've connected a Hauppauge WinTV-HVR-1900 to my Ubuntu 10.10 PC and used the instructions here to install the firmware and test that it is detected using dmesg. Detection is successful. The WinTV is connected to my TV using component connections. I run this command to enable the component interface: v4l2-ctl -i 1. Then I use cat /dev/video0 test.mpg, and that file is created and plays perfectly with video and sound. However, when I try to play /dev/video0 in VLC Player (and other players), I just get a black screen. I also try the v4l2-ctl -i 1 command before I try it in VLC, but I still get a black screen, and when I use v4l2-ctl -I, it shows it has connection 0 again (Television), so it reverts back to connection 0 instead of connection 1 (component). So I'm a little stuck with getting VLC to get a picture, even though the CAT command works fine. Anything I can try?

  Read the article

• How In-Memory Database Objects Affect Database Design: Hybrid Code

  - by drsql

  In my first attempts at building my code, I strictly went with either native or on-disk code. I specifically wrote the on-disk code to only use features that worked in-memory. This lead to one majorly silly bit of code, used to create system assigned key values. How would I create a customer number that was unique. We can’t use the Max(value) + 1 approach because it will be very hideous with MVCC isolation levels, since 100 connections might see the same value, leading to lots of duplication. You...(read more)

  Read the article

• broadcom 43225 wireless on acer laptop is disabled

  - by Robbie

  I have a acer aspire 5820T with a broadcom 43225 wireless card. I previously used ubuntu 10.10 and the wireless worked straight away, but when I updated to 11.04 the wireless stopped working. I have managed to get the wireless hardware to switch on for a couple of seconds before turning off (When you turn the wireless on using the manual switch the wireless light stays on for a couple of seconds and in the drop down connections menu the information under wireless networks changes from 'device not ready' to 'Disconnected' but shows no wireless networks despite there being one). So far I have tried installing an additional driver, and also disabling the additional driver and installing b43-fwcutter and firmware b43 installer. There may have been other things that I've found in searches that i've tried but unfortunately I can't remember them. Any help would be appreciated.

  Read the article

• Why has wireless disappeared after my 12.10 upgrade?

  - by Shay Guy

  I just upgraded to 12.10 on my Lenovo B570 laptop. NetworkManager isn't displaying a submenu for wireless connections at all, even though I downloaded the update through the wireless connection. This displeases me. Stuff I've tried includes: $ sudo modprobe wl FATAL: Module wl not found. $ sudo lspci -nn | grep "BCM" 02:00.0 Network controller [0280]: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller [14e4:4727] (rev 01) $ rfkill list all 0: ideapad_wlan: Wireless LAN Soft blocked: no Hard blocked: no ETA: linux-headers-generic is already the newest version, and what I get when reinstalling bcmwl-kernel-source includes the following, near the end. DKMS: install completed. ERROR: Module b43 does not exist in /proc/modules ERROR: Module b43legacy does not exist in /proc/modules ERROR: Module ssb does not exist in /proc/modules ERROR: Module bcm43xx does not exist in /proc/modules ERROR: Module brcm80211 does not exist in /proc/modules ERROR: Module brcmfmac does not exist in /proc/modules ERROR: Module brcmsmac does not exist in /proc/modules ERROR: Module bcma does not exist in /proc/modules FATAL: Module wl not found.

  Read the article

• Joomla of ASP.NET

  - by Sakhawat Ali

  Hi all, If i look into PHP they have Joomla, although it was initially build for CMS only but currently it is doing much more then that, like it have Shopping Card module, blogging, forums and many more. In short for PHP guy they have Joomla as opensource, which just need a little customization and the side is ready within 3days. Now what we have in ASP.NET, the most famous opensource here is dotNetNuke but don't support web2.0. My question here is that what do we have in ASP.NET platform or in other word what is Joomla of ASP.NET.

  Read the article

• Spawning Process Never Finishes on ASP.NET Page

  - by Nissan Fan

  The code below spawns the process and sits forever, never finishing. It doesn't matter what process I run. If I use delegates it doesn't work either. It just hangs up in my dev and on the test enviornment. Also, if I use Shell with Wait it does the same thing. If I set wait to false in either approach it works just fine. It's ASP.NET 2.0 VB.NET DotNetNuke 4.0 on Windows Server 2003. I can't even phathom why this would hang up. UPDATE: It causes the CPU to throttle up but it's not running anything. It's like there's something weird going on in the threading. From: http://www.freevbcode.com/ShowCode.asp?ID=5879 Public Sub ShellandWait(ByVal ProcessPath As String) Dim objProcess As System.Diagnostics.Process objProcess = New System.Diagnostics.Process() objProcess.StartInfo.FileName = ProcessPath objProcess.StartInfo.WindowStyle = ProcessWindowStyle.Hidden objProcess.Start() 'Wait until the process passes back an exit code objProcess.WaitForExit() 'Free resources associated with this process objProcess.Close() End Sub

  Read the article

• how to install a 3g dongle onn ubuntu

  - by user211208

  i have a 3g dongle of lava and i am not able to install it on my Ubuntu OS.when i plug it in it does not even recognize it,although the dongle has installation setup for Linux also. so how do i use internet on Ubuntu using a 3g dongle?? i even tried out the 3g dongle of Tata Docomo.i need to get software for my P.C to listen songs and watch movies.without net the OS is useless. i clicked on the network icon on the right corner and then on VPN connections to set up and Mobile broadband connection by providing the necessary info.at the end of all the stuff i entered the password for allowing it to install but there was an error. what am i supposed to do ??

  Read the article

• Did Microsoft Add Wiretapping Capability to Skype?

  Ryan Gallagher, writing for Slate, put two and two together from a lot of no comments. He noted that back in 2007, German police forces said that they couldn't tap into Skype calls because of of its strong encryption and complicated peer-to-peer network connections; in fact, Skype bluntly stated at the time that, due to its encryption and architecture techniques, it couldn't conduct wiretaps. But that may have changed. Gallagher cited a Forbes article that claims the hacker community is talking about recent changes to Skype's architecture and whether they will allow users to be wiretapped. ...

  Read the article

• Should I give preferential treatment to proxy users on my ecommerce site?

  - by Question Overflow

  I am setting up an ecommerce site that caters to a worldwide audience. I would imagine that visitors would come from everywhere, and for whatever reasons, some would be connecting through proxy servers. My site uses a server that is configured to rate limit connections from the same ip address to protect itself from a DOS attack. So, if a proxy server is heavily used by my visitors, then it would appear to be a DOS. This is problematic in a sense that it is hard to tell whether the users are genuinely browsing my site or if a DOS is taking place. So my question is, should I give preferential treatment to proxy users on my ecommerce site? If yes, how should this be done. If not, why not?

  Read the article

• Simpler Times

  - by Simon Moon

  Does anyone else out there long for the simpler days where you needed to move a jumper in the jumper block to set your modem card to use IRQ7 so it would not conflict with the interrupts used by other boards in your PC and your modem card came with a 78 page manual telling you everything you would need to know to write your own driver for the board including a full schematic along with the board layout showing every chip, capacitor, and resistor?  Ahhhhh, the simplicity!I am wrestling with UserPnp issues for a USB software licensing dongle that is needed by some third party software in one of our production applications. Of course, every machine in production is virtual, so it could be anything in the chain of the software application library to the device driver running on the VM to the configuration of the simulated USB port to the implementation of the USB connection and transport in the virtual host to the physical electrical connections in the USB port on the hypervisor.If only there were the virtual analog to a set of needle-nose pliers to move a virtual jumper.Come to think of it, I always used to drop those damn things such that they would land in an irretrievable position under the motherboard anyway.

  Read the article

• wired connection not being recognised in ubuntu 10.04 lts

  - by arun

  I have windows7 installed on my C drive and ubuntu 10.04 lts on my D drive. When I plud the lan cable (ethernet cable) onto the ethernet card of my laptop, windows7 identifies the network correctly without the need for any manual settings and connects me to the network correctly. Unfortunately, in ubuntu, even after plugging in the cable, nothing happens (on the network side). It is only scanning for wireless networks it seems, and doesnt bother about the wired networks. I tried adding a new wired connection and manually entered the physical address which was displayed when i connected to the network using windows. i entered the phy address, and told it to use auto dhcp and saved the dialog bog in ubuntu network connection. Still there is no change, and ubuntu doesnt seem to recognise anything. please let me know how to work with wired connections using ubuntu, and why my wired cable is not being recognized in ubuntu. thanks. PS: I am pretty new to ubuntu/ linux :)

  Read the article

• Turning my mobile boardband into Wifi with my laptop using Kubuntu 12.04 to use it in my desktop PC

  - by Suhail cholassery

  Its been 3 or 4 months since I started using 12.04. What I want to do is very clear: Turn my mobile broadband connection into Wifi connection with my laptop using Kubuntu 12.04 to use it in my desktop PC. I browsed through most of the questions related to this (ad- hoc connections, bridging mobile broadband with Wifi, etc). I also read the ICS article, but I found those too difficult to digest. I hope that there is some other way to do this. I request you to give me a practical and applicable answer . I am not trying duplicate any other existing question.

  Read the article

• x11 Remote Desktop with Ubuntu 12.04

  - by BSchlinker

  When I was running Debian, I was able to start a remote session over x11 by just typing gnome-session However, with Ubuntu 12.04, this only seems to result in my desktop and background being forwarded over x11 -- the top bar (where the clock is) and dock are both missing. I tried starting all of unity by executing unity, but that just resulted in a segfault. How can I start a Unity 2D session over x11? Edit: I prefer x11 as I need to tunnel the connection over 2 other servers. I would need to do a good amount of port forwarding within SSH to get any other connections back. Of course, if someone has any other suggestions, I'm willing to listen.

  Read the article

• Why won't Remmina connect to Windows 7 Remote Desktop?

  - by rfc1484

  I'm using Ubuntu and I'm trying to connect to another machine in a different network using remote desktop. In Windows7 I have made the following in order to activate remote desktop: I've gone to computer - properties - remote settings I've selected the option: "Allow connections from computers running any version of Remote Desktop I've opened "Windows Firewall with Advanced Security" In inbound rules I've enabled the rules for remote desktop (public and domain) I have also installed Remmina in the Ubuntu machine. For configuring it I did the following steps: Selected the RDP protocol In the server input I have written the Windows machine public IP. In username / password I have typed my login credentials (the same as my Windows admin account) But when I try to connect I get this error message: "Unable to connect to RDP server 89.130.251.160" If I ping my Windows7 machine, I have a correct response. Any suggestions?

  Read the article

• Does connection pooling work fine to execute 60 DB queries to load a page?

  - by willem

  We use Linq2Sql in an ASP.NET application. Unfortunately the eager-loading in Linq2Sql isn't as powerful as in Entity Framework, so a lot of the data has to be lazy loaded as needed. Taking connection pooling into account, is it OK for a web page to execute 60 queries to load a page? Executing a single big query probably won't be much better, as those 60 queries will all those connection pooled connections and not open a new connection each time (which I realize is slow). Any thoughts?

  Read the article

• Internet Connection Problems

  - by Confused One

  I just installed Ubuntu 11.04 onto a laptop. There is no list of automatic connections when I click on the internet connection symbol. Enable Wireless was unchecked, so I checked it. However, it continues saying "wireless is disabled." Soft is blocked, and when I tried rfkill unblock wifi it told me that the device was not ready. I tried to counter this with what I found on this thread but nothing worked. I have tried manually entering my Wireless information, but this does not help. Is there a solution?

  Read the article

• Always on VPN connection

  - by greg

  I have a working VPN connection. Works like a dream. What isn't working though, is the 'Connect Automatically' option in the Network Connections Manager Panel. It never connects automatically, not at boot, and not after disconnect. I'm not quite sure what that option is for. And I'll get disconnected from the VPN with no warning whatsoever. Is there a way to make sure my computer only connects to the internet through a VPN? So that if the VPN connection isn't established, my computer can't reach the internet. And is there a way to get ubuntu to attempt to reconnect to the VPN automatically if for some reason the connection drops?

  Read the article

• How to reverse file ownership and permission settings

  - by pandisvezia

  I installed LAMP and WordPress on my system a week ago. Since I couldn't create Child Themes in WordPress and work with PHP folders for my other projects collocated in var/www without using Nautilus I wanted to solve the permissions issue. I hoped to bring a solution carrying out the commands on this page for my WordPress folder: http://wiki.apache.org/httpd/FileSystemPermissions. This allowed me to play with any file in the folder like creating and modifying .css files through WP Admin, etc. But after a restart I discovered that I can't change DNS settings of my network connections in the list anymore because it is asking me the root password and even though I enter the password it doesn't let me do the action giving "insufficient privileges" error. Can you help me correct the mistake I possibily made during the configuration and, maybe, configure again the permission and ownership settings for var/www/somefolder as it is adviced to be configured under general circumstances? Thanks in advance!

  Read the article

• Architectural advice - websockets javascript/php integration

  - by Ewan Vaentine

  Myself and a friend have started making a game, he's likely to be using impact.js for the user interaction etc, but we need multiplayer functionality so some form of websockets for TCP connections etc. So we were thinking impact.js into socket.io and node.js. However, user accounts, ecommerce, session handling and social media integration will all be handled with Codeigniter (PHP), my question is, is it wise to have node.js running in parallel with Codeigniter, or if this is even possible? If not, if you were to create a multiplayer online game utilising ecomms to buy credits and user accounts, how would you go about this from a structural position and what engines/frameworks would you recommend? I'm new to this site so I apologise in advance if I'm posting something inappropriate. Cheers, Ewan

  Read the article

• ubuntu 10.10 maverick Zentyal . do anyone know where i can find its ? / download and install its ?

  - by santosamaru

  I want to installing Zentyal , do anyone know about the maverick version ? cause i got the news , that saying webmin is not available anymore and i have problem with its so that is why i try to change the webmin into Zentyal , but the problem is as i can find the version that they have is For Ubuntu 10.04 (Lucid) mine was ubuntu 10.10 maverick. i have problem with speed connections, that is why i need Zentyal so its will help me to build the squid to cache the webpage so its will help to make faster , lol, please your idea bout problem ,this, thanks.

  Read the article

• No wireless on Ubunto 12.10

  - by Dan Pitkin

  Okay, so I'm pretty new to the whole Ubuntu thing. I installed it yesterday alongside Windows 8, and it installed fine. Then I started it up and tried to connect to my wireless router. It wouldn't give me the option and the only thing that I could find was Edit Connections thing along the top which I didn't understand at all and just ended up confusing me. Can someone give me a simple explanation as to what I have to do? My laptop is a Toshiba Satellite C855-18D. Thanks guys!

  Read the article

• Looking for a file database

  - by Mitchell Skurnik

  A few years ago there was a PHP script around called paFileDB. Essentially it created a database of files that end users could download and rate. It would keep track of the number of downloads as well. I am looking for a replacement of this coded in ASP.net C#. For the last week I have been searching around for "asp.net C# file database" and have just gotten how to upload files to a database. I have also search with some other terms. I do not need a full blown CMS like DotNetNuke or SharePoint. All I have been looking for is a system I could easily add to my existing .net C# site. I have thought about coding one myself, but with me being rather busy at work and this being a personal project, I simply do not have the time to code this myself. I hope that you guys can help. Thank you!

  Read the article

• Mobile broadband not connect without unplug and plug

  - by Muhammad Zohaib

  I have recently installed ubuntu 13.10 and I am still very new in this operating system. My problem is that when I start my computer, it detects all the wifi connections around but not my mobile broadband usb connection (huwaie). I dont get any mobile broadband section automatically. I have to unplug and then plug my broadband usb to connect and have mobile broadband section available. I dont like to unplug and then plug my device always as it will loose my laptop and I always want to be plug in laptop even in shutdown. I always want to auto detect my usb broadband by ubuntu. Please someone guide me. Thanks in advance.

  Read the article

• Winnipeg SQL Server UG January Event

  - by D'Arcy Lussier

  January Event - Highlights From PASS Summit January 19th, 2011 5:30 - 8:00 17th Floor Conference Room, Richardson Building One Lombard Place, Winnipeg Pizza and Drinks Provided! Presenter: Michael DeFehr This past November I attended the PASS summit in Seattle and SQL Connections in Las Vegas.  In this session, I’ll go over the highlights of what I learned in these two weeks.  SQL Server “Denali” (the next version of SQL server) was a big theme of both conferences, but I attended sessions on grouping sets, virtualizing SQL server, extended events, latches and I attended keynotes where such new an upcoming features and products as “Microsoft Atlanta”, Crescent and Filetable were introduced.  Also:  is “undo” coming in SSIS?  Come and find out! Please register for this event here

  Read the article

< Previous Page | 84 85 86 87 88 89 90 91 92 93 94 95  | Next Page >