Search Results

Search found 10883 results on 436 pages for 'thread timeout'.

Page 88/436 | < Previous Page | 84 85 86 87 88 89 90 91 92 93 94 95  | Next Page >

• Is Work Stealing always the most appropriate user-level thread scheduling algorithm?

  - by Il-Bhima

  I've been investigating different scheduling algorithms for a thread pool I am implementing. Due to the nature of the problem I am solving I can assume that the tasks being run in parallel are independent and do not spawn any new tasks. The tasks can be of varying sizes. I went immediately for the most popular scheduling algorithm "work stealing" using lock-free deques for the local job queues, and I am relatively happy with this approach. However I'm wondering whether there are any common cases where work-stealing is not the best approach. For this particular problem I have a good estimate of the size of each individual task. Work-stealing does not make use of this information and I'm wondering if there is any scheduler which will give better load-balancing than work-stealing with this information (obviously with the same efficiency). NB. This question ties up with a previous question.

  Read the article

• How does one modify the thread scheduling behavior when using Threading Building Blocks (TBB)?

  - by J Teller

  Does anyone know how to modify the thread scheduling (specifically affinity) when using TBB? Doing a high level analysis on a simple parallel-for application, it seems like TBB is specifying the underlying threads' affinity in a way that reduces performance. Specifically, the cores I'm running on have hyper-threading enabled, and it looks like TBB is affinitizing threads to the same core even if there is a different core left completely unloaded. FWIW, I realize it's likely that TBB is doing the "right thing" and that changing the threads' affinity will only reduce performance. I'd just like to experiment with it to see if that's really the case.

  Read the article

• Printdialog in multithreaded wpf window thrown TargetInvocationException

  - by Nils

  I have designed a multithreaded app, which is starting most windows in an dedicated thread like this: Thread newWindowThread = new Thread(new ThreadStart(ThreadStartingPoint)); newWindowThread.SetApartmentState(ApartmentState.STA); newWindowThread.IsBackground = true; newWindowThread.Start(); However, if in one of those window-in-own-thread I try to print something by simply calling PrintDialog pDialog = new PrintDialog(); bool? doPrint = pDialog.ShowDialog(); I get a TargetInvocationException - it does look like the PrintDialog does not reside in the same thread as my window. Is there any way to create a thread-agnostic (or "thread-save") PrinterDialog ?

  Read the article

• Whats wrong with my SQL query?

  - by William

  I'm trying to set up a query that shows the first post of each thread and is ordered by the date of the last post in each thread. I got the first part down with this query: SELECT * FROM ( SELECT Min( ID ) AS MinID FROM test_posts GROUP BY Thread )tmin JOIN test_posts ON test_posts.ID = tmin.MinID Now I need to figure out how to call the last post of each thread into a table, than use that table to order the first tables results. So far I got this, but it doesn't work. SELECT * FROM ( SELECT Min( ID ) AS MinID FROM test_posts GROUP BY Thread )tmin JOIN test_posts ON test_posts.ID = tmin.MinID ORDER BY (SELECT MAX( ID ) AS MaxID, Thread, MAX( Date ) FROM test_posts GROUP BY Thread )tmax tmax.Date

  Read the article

• Why in the following code the output is different when I compile or run it more than once

  - by Sanjeev

  class Name implements Runnable { public void run() { for (int x = 1; x <= 3; x++) { System.out.println("Run by " + Thread.currentThread().getName() + ", x is " + x); } } } public class Threadtest { public static void main(String [] args) { // Make one Runnable Name nr = new Name(); Thread one = new Thread(nr); Thread two = new Thread(nr); Thread three = new Thread(nr); one.setName("A"); two.setName("B"); three.setName("C"); one.start(); two.start(); three.start(); } } The answer is different while compiling and running more then one time I don't know why? any idea.

  Read the article

• Why a thread is aborted in ASP.NET MVC (again)?

  - by Dario Solera

  Here is what I do in a controller action: create and start a new Thread that does a relatively long processing task (~30 seconds on average, but might be several minutes) immediately return the page response so the user knows processing has started (trivially, a Json with a task ID for polling purposes). At some random point, ThreadAbortException is thrown, so the async task does not complete. The exception is not thrown every time, it just happens randomly roughly 25% of the times. Points to note: I'm not calling Response.End or Response.Redirect - there isn't even a request running when the exception is thrown I tried using ThreadPool and I got the same behavior I know running threads in ASP.NET has several caveats but I don't care right now Any suggestion?

  Read the article

• POSIX Threads and signal masks

  - by Max

  Is there a way to change the signal mask of a thread from another thread? I am supposed to write a multithreaded C application that doesn't use mutex, semaphores and condition variables, only signals. So it would look like something like this: The main Thread sends SIGUSR1 to its process and and one of the 2 threads (not including the main thread), will respond to the signal and block SIGUSR1 from the sigmask and sleep. Then the main thread sends SIGUSR1 again, the other thread will respond, block SIGUSR1 from its sigmask, unblock SIGUSR1 from the other threads sigmask, so it will respond to SIGUSR1 again. So essentially whenever the main thread sends SIGUSR1 the two other threads swap between each other. Can somebody help?

  Read the article

• What is wrong with my @synchronized block?

  - by hyn

  I have 2 threads in my application, a game update thread and render/IO/main thread. My update thread updates the game state, and the render thread renders the scene based on the updated values of the game state models and a few other variables stored inside an object (gameEngine). The render thread gets executed while the game thread is still updating, which is a problem, so it appeared to me the solution is to use @synchronized like this: @synchronized(gameEngine) { [gameEngine update]; nextUpdate = now + GAME_UPDATE_INTERVAL; gameEngine.lastGameUpdateInterval = now - lastUpdate; gameEngine.lastGameUpdateTime = now; lastUpdate = now; } But the render thread still accesses the gameEngine object between -update and the last 3 lines of the block. Why is this?

  Read the article

• Java sockets: can I write a TCP server with one thread?

  - by hmp

  From what I read about Java NIO and non-blocking [Server]SocketChannels, it should be possible to write a TCP server that sustains several connections using only one thread - I'd make a Selector that waits for all relevant channels in the server's loop. Is that right, or am I missing some important detail? What problems can I encounter? (Background: The TCP communication would be for a small multiplayer game, so max. 10-20 simultaneous connections. Messages will be sent about every few seconds.)

  Read the article

• Failing faster when URL content is not found, howto

  - by Jam

  I have a thread pool that loops over a bunch of pages and checks to see if some string is there or not. If String is found, or not found response is near instant, however if server is offline or application is not running getting a rejection seems to take seconds How can I change my code to fail faster? for (Thread thread : pool) { thread.start(); } for (Thread thread : pool) { try { thread.join(); } catch (InterruptedException e) { e.printStackTrace(); } } Here is my run method @Override public void run() { for (Box b : boxes) { try { connection = new URL(b.getUrl()).openConnection(); scanner = new Scanner(connection.getInputStream()); scanner.useDelimiter("\\Z"); content = scanner.next(); if (content.equals("YES")) { } else { System.out.println("\tFAILED ON " + b.getName() + " BAD APPLICATION STATE"); } } catch (Exception ex) { System.out.println("\tFAILED ON " + b.getName() + " BAD APPLICATION STATE"); } } }

  Read the article

• C#/.NET Little Wonders: Interlocked Read() and Exchange()

  - by James Michael Hare

  Once again, in this series of posts I look at the parts of the .NET Framework that may seem trivial, but can help improve your code by making it easier to write and maintain. The index of all my past little wonders posts can be found here. Last time we discussed the Interlocked class and its Add(), Increment(), and Decrement() methods which are all useful for updating a value atomically by adding (or subtracting).  However, this begs the question of how do we set and read those values atomically as well? Read() – Read a value atomically Let’s begin by examining the following code: 1: public class Incrementor 2: { 3: private long _value = 0; 4:  5: public long Value { get { return _value; } } 6:  7: public void Increment() 8: { 9: Interlocked.Increment(ref _value); 10: } 11: } 12:  It uses an interlocked increment, as we discuss in my previous post (here), so we know that the increment will be thread-safe.  But, to realize what’s potentially wrong we have to know a bit about how atomic reads are in 32 bit and 64 bit .NET environments. When you are dealing with an item smaller or equal to the system word size (such as an int on a 32 bit system or a long on a 64 bit system) then the read is generally atomic, because it can grab all of the bits needed at once.  However, when dealing with something larger than the system word size (reading a long on a 32 bit system for example), it cannot grab the whole value at once, which can lead to some problems since this read isn’t atomic. For example, this means that on a 32 bit system we may read one half of the long before another thread increments the value, and the other half of it after the increment.  To protect us from reading an invalid value in this manner, we can do an Interlocked.Read() to force the read to be atomic (of course, you’d want to make sure any writes or increments are atomic also): 1: public class Incrementor 2: { 3: private long _value = 0; 4:  5: public long Value 6: { 7: get { return Interlocked.Read(ref _value); } 8: } 9:  10: public void Increment() 11: { 12: Interlocked.Increment(ref _value); 13: } 14: } Now we are guaranteed that we will read the 64 bit value atomically on a 32 bit system, thus ensuring our thread safety (assuming all other reads, writes, increments, etc. are likewise protected).  Note that as stated before, and according to the MSDN (here), it isn’t strictly necessary to use Interlocked.Read() for reading 64 bit values on 64 bit systems, but for those still working in 32 bit environments, it comes in handy when dealing with long atomically. Exchange() – Exchanges two values atomically Exchange() lets us store a new value in the given location (the ref parameter) and return the old value as a result. So just as Read() allows us to read atomically, one use of Exchange() is to write values atomically.  For example, if we wanted to add a Reset() method to our Incrementor, we could do something like this: 1: public void Reset() 2: { 3: _value = 0; 4: } But the assignment wouldn’t be atomic on 32 bit systems, since the word size is 32 bits and the variable is a long (64 bits).  Thus our assignment could have only set half the value when a threaded read or increment happens, which would put us in a bad state. So instead, we could write Reset() like this: 1: public void Reset() 2: { 3: Interlocked.Exchange(ref _value, 0); 4: } And we’d be safe again on a 32 bit system. But this isn’t the only reason Exchange() is valuable.  The key comes in realizing that Exchange() doesn’t just set a new value, it returns the old as well in an atomic step.  Hence the name “exchange”: you are swapping the value to set with the stored value. So why would we want to do this?  Well, anytime you want to set a value and take action based on the previous value.  An example of this might be a scheme where you have several tasks, and during every so often, each of the tasks may nominate themselves to do some administrative chore.  Perhaps you don’t want to make this thread dedicated for whatever reason, but want to be robust enough to let any of the threads that isn’t currently occupied nominate itself for the job.  An easy and lightweight way to do this would be to have a long representing whether someone has acquired the “election” or not.  So a 0 would indicate no one has been elected and 1 would indicate someone has been elected. We could then base our nomination strategy as follows: every so often, a thread will attempt an Interlocked.Exchange() on the long and with a value of 1.  The first thread to do so will set it to a 1 and return back the old value of 0.  We can use this to show that they were the first to nominate and be chosen are thus “in charge”.  Anyone who nominates after that will attempt the same Exchange() but will get back a value of 1, which indicates that someone already had set it to a 1 before them, thus they are not elected. Then, the only other step we need take is to remember to release the election flag once the elected thread accomplishes its task, which we’d do by setting the value back to 0.  In this way, the next thread to nominate with Exchange() will get back the 0 letting them know they are the new elected nominee. Such code might look like this: 1: public class Nominator 2: { 3: private long _nomination = 0; 4: public bool Elect() 5: { 6: return Interlocked.Exchange(ref _nomination, 1) == 0; 7: } 8: public bool Release() 9: { 10: return Interlocked.Exchange(ref _nomination, 0) == 1; 11: } 12: } There’s many ways to do this, of course, but you get the idea.  Running 5 threads doing some “sleep” work might look like this: 1: var nominator = new Nominator(); 2: var random = new Random(); 3: Parallel.For(0, 5, i => 4: { 5:  6: for (int j = 0; j < _iterations; ++j) 7: { 8: if (nominator.Elect()) 9: { 10: // elected 11: Console.WriteLine("Elected nominee " + i); 12: Thread.Sleep(random.Next(100, 5000)); 13: nominator.Release(); 14: } 15: else 16: { 17: // not elected 18: Console.WriteLine("Did not elect nominee " + i); 19: } 20: // sleep before check again 21: Thread.Sleep(1000); 22: } 23: }); And would spit out results like: 1: Elected nominee 0 2: Did not elect nominee 2 3: Did not elect nominee 1 4: Did not elect nominee 4 5: Did not elect nominee 3 6: Did not elect nominee 3 7: Did not elect nominee 1 8: Did not elect nominee 2 9: Did not elect nominee 4 10: Elected nominee 3 11: Did not elect nominee 2 12: Did not elect nominee 1 13: Did not elect nominee 4 14: Elected nominee 0 15: Did not elect nominee 2 16: Did not elect nominee 4 17: ... Another nice thing about the Interlocked.Exchange() is it can be used to thread-safely set pretty much anything 64 bits or less in size including references, pointers (in unsafe mode), floats, doubles, etc.  Summary So, now we’ve seen two more things we can do with Interlocked: reading and exchanging a value atomically.  Read() and Exchange() are especially valuable for reading/writing 64 bit values atomically in a 32 bit system.  Exchange() has value even beyond simply atomic writes by using the Exchange() to your advantage, since it reads and set the value atomically, which allows you to do lightweight nomination systems. There’s still a few more goodies in the Interlocked class which we’ll explore next time! Technorati Tags: C#,CSharp,.NET,Little Wonders,Interlocked

  Read the article

• Simple Cisco ASA 5505 config issue

  - by Ben Sebborn

  I have a Cisco ASA setup with two interfaces: inside: 192.168.2.254 / 255.255.255.0 SecLevel:100 outside: 192.168.3.250 / 255.255.255.0 SecLevel: 0 I have a static route setup to allow PCs on the inside network to access the internet via a gateway on the outside interface (3.254): outside 0.0.0.0 0.0.0.0 192.168.3.254 This all works fine. I now need to be able to access a PC on the outside interface (3.253) from a PC on the inside interface on port 35300. I understand I should be able to do this with no problems, as I'm going from a higher security level to a lower one. However I can't get any connection. Do I need to set up a seperate static route? Perhaps the route above is overriding what I need to be able to do (is it routing ALL traffic through the gateway?) Any advice on how to do this would be apprecaited. I am configuring this via ASDM but the config can be seen as below: Result of the command: "show running-config" : Saved : ASA Version 8.2(5) ! hostname ciscoasa domain-name xxx.internal names name 192.168.2.201 dev.xxx.internal description Internal Dev server name 192.168.2.200 Newserver ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 ! interface Ethernet0/3 shutdown ! interface Ethernet0/4 shutdown ! interface Ethernet0/5 shutdown ! interface Ethernet0/6 shutdown ! interface Ethernet0/7 shutdown ! interface Vlan1 nameif inside security-level 100 ip address 192.168.2.254 255.255.255.0 ! interface Vlan2 nameif outside security-level 0 ip address 192.168.3.250 255.255.255.0 ! ! time-range Workingtime periodic weekdays 9:00 to 18:00 ! ftp mode passive clock timezone GMT/BST 0 clock summer-time GMT/BDT recurring last Sun Mar 1:00 last Sun Oct 2:00 dns domain-lookup inside dns server-group DefaultDNS name-server Newserver domain-name xxx.internal same-security-traffic permit inter-interface object-group service Mysql tcp port-object eq 3306 object-group protocol TCPUDP protocol-object udp protocol-object tcp access-list inside_access_in extended permit ip any any access-list outside_access_in remark ENABLES OUTSDIE ACCESS TO DEV SERVER! access-list outside_access_in extended permit tcp any interface outside eq www time-range Workingtime inactive access-list outside_access_in extended permit tcp host www-1.xxx.com interface outside eq ssh access-list inside_access_in_1 extended permit tcp any any eq www access-list inside_access_in_1 extended permit tcp any any eq https access-list inside_access_in_1 remark Connect to SSH services access-list inside_access_in_1 extended permit tcp any any eq ssh access-list inside_access_in_1 remark Connect to mysql server access-list inside_access_in_1 extended permit tcp any host mysql.xxx.com object-group Mysql access-list inside_access_in_1 extended permit tcp any host mysql.xxx.com eq 3312 access-list inside_access_in_1 extended permit object-group TCPUDP host Newserver any eq domain access-list inside_access_in_1 extended permit icmp any any access-list inside_access_in_1 remark Draytek Admin access-list inside_access_in_1 extended permit tcp any 192.168.3.0 255.255.255.0 eq 4433 access-list inside_access_in_1 remark Phone System access-list inside_access_in_1 extended permit tcp any 192.168.3.0 255.255.255.0 eq 35300 log disable pager lines 24 logging enable logging asdm warnings logging from-address [email protected] logging recipient-address [email protected] level errors mtu inside 1500 mtu outside 1500 ip verify reverse-path interface inside ip verify reverse-path interface outside ipv6 access-list inside_access_ipv6_in permit tcp any any eq www ipv6 access-list inside_access_ipv6_in permit tcp any any eq https ipv6 access-list inside_access_ipv6_in permit tcp any any eq ssh ipv6 access-list inside_access_ipv6_in permit icmp6 any any icmp unreachable rate-limit 1 burst-size 1 icmp permit any outside no asdm history enable arp timeout 14400 global (outside) 1 interface nat (inside) 1 0.0.0.0 0.0.0.0 static (inside,outside) tcp interface www dev.xxx.internal www netmask 255.255.255.255 static (inside,outside) tcp interface ssh dev.xxx.internal ssh netmask 255.255.255.255 access-group inside_access_in in interface inside control-plane access-group inside_access_in_1 in interface inside access-group inside_access_ipv6_in in interface inside access-group outside_access_in in interface outside route outside 0.0.0.0 0.0.0.0 192.168.3.254 10 route outside 192.168.3.252 255.255.255.255 192.168.3.252 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 timeout floating-conn 0:00:00 dynamic-access-policy-record DfltAccessPolicy aaa authentication telnet console LOCAL aaa authentication enable console LOCAL

  Read the article

• JNI 'problmatic frame' causes JVM to crash

  - by HJED

  Hi I'm using JNI to access the exiv2 library (written in C++) in Java and I'm getting a weird runtime error in the JNI code. I've tried using various -Xms and -Xmx options, but that seems to have no affect. I've also tried running this code on JDK1.7.0 with the same result. # A fatal error has been detected by the Java Runtime Environment: # # SIGSEGV (0xb) at pc=0x00007ff31807757f, pid=4041, tid=140682078746368 # # JRE version: 6.0_20-b20 # Java VM: OpenJDK 64-Bit Server VM (19.0-b09 mixed mode linux-amd64 ) # Derivative: IcedTea6 1.9.2 # Distribution: Ubuntu 10.10, package 6b20-1.9.2-0ubuntu2 # Problematic frame: # V [libjvm.so+0x42757f] # # If you would like to submit a bug report, please include # instructions how to reproduce the bug and visit: # https://bugs.launchpad.net/ubuntu/+source/openjdk-6/ # --------------- T H R E A D --------------- Current thread (0x000000000190d000): JavaThread "main" [_thread_in_Java, id=4043, stack(0x00007ff319447000,0x00007ff319548000)] siginfo:si_signo=SIGSEGV: si_errno=0, si_code=1 (SEGV_MAPERR), si_addr=0x0000000000000024 Registers: ... Register to memory mapping: RAX=0x0000000000000002 0x0000000000000002 is pointing to unknown location RBX=0x000000000190db90 0x000000000190db90 is pointing to unknown location RCX=0x0000000000000000 0x0000000000000000 is pointing to unknown location RDX=0x00007ff3195463f8 0x00007ff3195463f8 is pointing into the stack for thread: 0x000000000190d000 "main" prio=10 tid=0x000000000190d000 nid=0xfcb runnable [0x0000000000000000] java.lang.Thread.State: RUNNABLE RSP=0x00007ff319546270 0x00007ff319546270 is pointing into the stack for thread: 0x000000000190d000 "main" prio=10 tid=0x000000000190d000 nid=0xfcb runnable [0x0000000000000000] java.lang.Thread.State: RUNNABLE RBP=0x00007ff319546270 0x00007ff319546270 is pointing into the stack for thread: 0x000000000190d000 "main" prio=10 tid=0x000000000190d000 nid=0xfcb runnable [0x0000000000000000] java.lang.Thread.State: RUNNABLE RSI=0x0000000000000024 0x0000000000000024 is pointing to unknown location RDI=0x00007ff3195463e0 0x00007ff3195463e0 is pointing into the stack for thread: 0x000000000190d000 "main" prio=10 tid=0x000000000190d000 nid=0xfcb runnable [0x0000000000000000] java.lang.Thread.State: RUNNABLE R8 =0x000000000190d000 "main" prio=10 tid=0x000000000190d000 nid=0xfcb runnable [0x0000000000000000] java.lang.Thread.State: RUNNABLE R9 =0x000000000190db88 0x000000000190db88 is pointing to unknown location R10=0x00007ff319546300 0x00007ff319546300 is pointing into the stack for thread: 0x000000000190d000 "main" prio=10 tid=0x000000000190d000 nid=0xfcb runnable [0x0000000000000000] java.lang.Thread.State: RUNNABLE R11=0x0000000000000002 0x0000000000000002 is pointing to unknown location R12=0x000000000190d000 "main" prio=10 tid=0x000000000190d000 nid=0xfcb runnable [0x0000000000000000] java.lang.Thread.State: RUNNABLE R13=0x00007ff319546560 0x00007ff319546560 is pointing into the stack for thread: 0x000000000190d000 "main" prio=10 tid=0x000000000190d000 nid=0xfcb runnable [0x0000000000000000] java.lang.Thread.State: RUNNABLE R14=0x00007ff3195463e0 0x00007ff3195463e0 is pointing into the stack for thread: 0x000000000190d000 "main" prio=10 tid=0x000000000190d000 nid=0xfcb runnable [0x0000000000000000] java.lang.Thread.State: RUNNABLE R15=0x0000000000000003 0x0000000000000003 is pointing to unknown location Top of Stack: (sp=0x00007ff319546270) ... Instructions: (pc=0x00007ff31807757f) 0x00007ff31807756f: e2 03 48 03 57 58 31 c9 48 8b 32 48 85 f6 74 03 0x00007ff31807757f: 48 8b 0e 48 89 0a 8b 77 68 83 c0 01 39 f0 7c d1 Stack: [0x00007ff319447000,0x00007ff319548000], sp=0x00007ff319546270, free space=1020k Native frames: (J=compiled Java code, j=interpreted, Vv=VM code, C=native code) V [libjvm.so+0x42757f] V [libjvm.so+0x42866b] V [libjvm.so+0x4275c8] V [libjvm.so+0x4331bd] V [libjvm.so+0x44e5c7] C [libExiff2-binding.so+0x1f16] _ZN7JNIEnv_15CallVoidMethodAEP8_jobjectP10_jmethodIDPK6jvalue+0x40 C [libExiff2-binding.so+0x1b96] _Z8loadIPTCSt8auto_ptrIN5Exiv25ImageEEPKcP7JNIEnv_P8_jobject+0x2ba C [libExiff2-binding.so+0x1d3f] _Z7getVarsPKcP7JNIEnv_P8_jobject+0x176 C [libExiff2-binding.so+0x1de7] Java_photo_exiv2_Exiv2MetaDataStore_impl_1loadFromExiv+0x4b j photo.exiv2.Exiv2MetaDataStore.impl_loadFromExiv(Ljava/lang/String;Lphoto/exiv2/Exiv2MetaDataStore;)V+0 j photo.exiv2.Exiv2MetaDataStore.loadFromExiv2()V+9 j photo.exiv2.Exiv2MetaDataStore.loadData()V+1 j photo.exiv2.Exiv2MetaDataStore.<init>(Lphoto/ImageFile;)V+10 j test.Main.main([Ljava/lang/String;)V+76 v ~StubRoutines::call_stub V [libjvm.so+0x428698] V [libjvm.so+0x4275c8] V [libjvm.so+0x432943] V [libjvm.so+0x447f91] C [java+0x3495] JavaMain+0xd75 --------------- P R O C E S S --------------- Java Threads: ( => current thread ) 0x00007ff2c4027800 JavaThread "Low Memory Detector" daemon [_thread_blocked, id=4060, stack(0x00007ff2c9052000,0x00007ff2c9153000)] 0x00007ff2c4025000 JavaThread "CompilerThread1" daemon [_thread_blocked, id=4059, stack(0x00007ff2c9153000,0x00007ff2c9254000)] 0x00007ff2c4022000 JavaThread "CompilerThread0" daemon [_thread_blocked, id=4058, stack(0x00007ff2c9254000,0x00007ff2c9355000)] 0x00007ff2c401f800 JavaThread "Signal Dispatcher" daemon [_thread_blocked, id=4057, stack(0x00007ff2c9355000,0x00007ff2c9456000)] 0x00007ff2c4001000 JavaThread "Finalizer" daemon [_thread_blocked, id=4056, stack(0x00007ff2c994d000,0x00007ff2c9a4e000)] 0x0000000001984000 JavaThread "Reference Handler" daemon [_thread_blocked, id=4055, stack(0x00007ff2c9a4e000,0x00007ff2c9b4f000)] =>0x000000000190d000 JavaThread "main" [_thread_in_Java, id=4043, stack(0x00007ff319447000,0x00007ff319548000)] Other Threads: 0x000000000197d800 VMThread [stack: 0x00007ff2c9b4f000,0x00007ff2c9c50000] [id=4054] 0x00007ff2c4032000 WatcherThread [stack: 0x00007ff2c8f51000,0x00007ff2c9052000] [id=4061] VM state:not at safepoint (normal execution) VM Mutex/Monitor currently owned by a thread: None Heap PSYoungGen total 18432K, used 316K [0x00007ff2fed30000, 0x00007ff3001c0000, 0x00007ff313730000) eden space 15808K, 2% used [0x00007ff2fed30000,0x00007ff2fed7f0b8,0x00007ff2ffca0000) from space 2624K, 0% used [0x00007ff2fff30000,0x00007ff2fff30000,0x00007ff3001c0000) to space 2624K, 0% used [0x00007ff2ffca0000,0x00007ff2ffca0000,0x00007ff2fff30000) PSOldGen total 42240K, used 0K [0x00007ff2d5930000, 0x00007ff2d8270000, 0x00007ff2fed30000) object space 42240K, 0% used [0x00007ff2d5930000,0x00007ff2d5930000,0x00007ff2d8270000) PSPermGen total 21248K, used 2827K [0x00007ff2cb330000, 0x00007ff2cc7f0000, 0x00007ff2d5930000) object space 21248K, 13% used [0x00007ff2cb330000,0x00007ff2cb5f2f60,0x00007ff2cc7f0000) Dynamic libraries: 00400000-00409000 r-xp 00000000 08:03 141899 /usr/lib/jvm/java-6-openjdk/jre/bin/java 00608000-00609000 r--p 00008000 08:03 141899 /usr/lib/jvm/java-6-openjdk/jre/bin/java 00609000-0060a000 rw-p 00009000 08:03 141899 /usr/lib/jvm/java-6-openjdk/jre/bin/java 01904000-019ad000 rw-p 00000000 00:00 0 [heap] ... 7ff2c820c000-7ff2c8232000 r-xp 00000000 08:03 917704 /lib/libexpat.so.1.5.2 7ff2c8232000-7ff2c8432000 ---p 00026000 08:03 917704 /lib/libexpat.so.1.5.2 7ff2c8432000-7ff2c8434000 r--p 00026000 08:03 917704 /lib/libexpat.so.1.5.2 7ff2c8434000-7ff2c8435000 rw-p 00028000 08:03 917704 /lib/libexpat.so.1.5.2 7ff2c8435000-7ff2c844a000 r-xp 00000000 08:03 917708 /lib/libgcc_s.so.1 7ff2c844a000-7ff2c8649000 ---p 00015000 08:03 917708 /lib/libgcc_s.so.1 7ff2c8649000-7ff2c864a000 r--p 00014000 08:03 917708 /lib/libgcc_s.so.1 7ff2c864a000-7ff2c864b000 rw-p 00015000 08:03 917708 /lib/libgcc_s.so.1 7ff2c864b000-7ff2c8733000 r-xp 00000000 08:03 134995 /usr/lib/libstdc++.so.6.0.14 7ff2c8733000-7ff2c8932000 ---p 000e8000 08:03 134995 /usr/lib/libstdc++.so.6.0.14 7ff2c8932000-7ff2c893a000 r--p 000e7000 08:03 134995 /usr/lib/libstdc++.so.6.0.14 7ff2c893a000-7ff2c893c000 rw-p 000ef000 08:03 134995 /usr/lib/libstdc++.so.6.0.14 7ff2c893c000-7ff2c8951000 rw-p 00000000 00:00 0 7ff2c8951000-7ff2c8af3000 r-xp 00000000 08:03 134599 /usr/lib/libexiv2.so.6.0.0 7ff2c8af3000-7ff2c8cf2000 ---p 001a2000 08:03 134599 /usr/lib/libexiv2.so.6.0.0 7ff2c8cf2000-7ff2c8d0f000 r--p 001a1000 08:03 134599 /usr/lib/libexiv2.so.6.0.0 7ff2c8d0f000-7ff2c8d10000 rw-p 001be000 08:03 134599 /usr/lib/libexiv2.so.6.0.0 7ff2c8d10000-7ff2c8d23000 rw-p 00000000 00:00 0 7ff2c8d42000-7ff2c8d45000 r-xp 00000000 08:03 800718 /home/hjed/libExiff2-binding.so 7ff2c8d45000-7ff2c8f44000 ---p 00003000 08:03 800718 /home/hjed/libExiff2-binding.so 7ff2c8f44000-7ff2c8f45000 r--p 00002000 08:03 800718 /home/hjed/libExiff2-binding.so 7ff2c8f45000-7ff2c8f46000 rw-p 00003000 08:03 800718 /home/hjed/libExiff2-binding.so 7ff2c8f46000-7ff2c8f49000 r--s 0000f000 08:03 141333 /usr/lib/jvm/java-6-openjdk/jre/lib/ext/pulse-java.jar 7ff2c8f49000-7ff2c8f51000 r--s 00066000 08:03 408472 /usr/share/java/gnome-java-bridge.jar ... 7ff2ca559000-7ff2ca55b000 r--s 0001d000 08:03 141354 /usr/lib/jvm/java-6-openjdk/jre/lib/plugin.jar 7ff2ca55b000-7ff2ca560000 r--s 00044000 08:03 141353 /usr/lib/jvm/java-6-openjdk/jre/lib/netx.jar 7ff2ca560000-7ff2ca592000 rw-p 00000000 00:00 0 7ff2ca592000-7ff2ca720000 r--s 038af000 08:03 141833 /usr/lib/jvm/java-6-openjdk/jre/lib/rt.jar ... 7ff31673b000-7ff316742000 r-xp 00000000 08:03 141867 /usr/lib/jvm/java-6-openjdk/jre/lib/amd64/libzip.so 7ff316742000-7ff316941000 ---p 00007000 08:03 141867 /usr/lib/jvm/java-6-openjdk/jre/lib/amd64/libzip.so 7ff316941000-7ff316942000 r--p 00006000 08:03 141867 /usr/lib/jvm/java-6-openjdk/jre/lib/amd64/libzip.so 7ff316942000-7ff316943000 rw-p 00007000 08:03 141867 /usr/lib/jvm/java-6-openjdk/jre/lib/amd64/libzip.so 7ff316943000-7ff31694f000 r-xp 00000000 08:03 921396 /lib/libnss_files-2.12.1.so 7ff31694f000-7ff316b4e000 ---p 0000c000 08:03 921396 /lib/libnss_files-2.12.1.so 7ff316b4e000-7ff316b4f000 r--p 0000b000 08:03 921396 /lib/libnss_files-2.12.1.so 7ff316b4f000-7ff316b50000 rw-p 0000c000 08:03 921396 /lib/libnss_files-2.12.1.so 7ff316b50000-7ff316b5a000 r-xp 00000000 08:03 921398 /lib/libnss_nis-2.12.1.so 7ff316b5a000-7ff316d59000 ---p 0000a000 08:03 921398 /lib/libnss_nis-2.12.1.so 7ff316d59000-7ff316d5a000 r--p 00009000 08:03 921398 /lib/libnss_nis-2.12.1.so 7ff316d5a000-7ff316d5b000 rw-p 0000a000 08:03 921398 /lib/libnss_nis-2.12.1.so 7ff316d5b000-7ff316d63000 r-xp 00000000 08:03 921393 /lib/libnss_compat-2.12.1.so 7ff316d63000-7ff316f62000 ---p 00008000 08:03 921393 /lib/libnss_compat-2.12.1.so 7ff316f62000-7ff316f63000 r--p 00007000 08:03 921393 /lib/libnss_compat-2.12.1.so 7ff316f63000-7ff316f64000 rw-p 00008000 08:03 921393 /lib/libnss_compat-2.12.1.so 7ff316f64000-7ff316f6c000 r-xp 00000000 08:03 141869 /usr/lib/jvm/java-6-openjdk/jre/lib/amd64/native_threads/libhpi.so 7ff316f6c000-7ff31716b000 ---p 00008000 08:03 141869 /usr/lib/jvm/java-6-openjdk/jre/lib/amd64/native_threads/libhpi.so 7ff31716b000-7ff31716c000 r--p 00007000 08:03 141869 /usr/lib/jvm/java-6-openjdk/jre/lib/amd64/native_threads/libhpi.so 7ff31716c000-7ff31716d000 rw-p 00008000 08:03 141869 /usr/lib/jvm/java-6-openjdk/jre/lib/amd64/native_threads/libhpi.so 7ff31716d000-7ff317184000 r-xp 00000000 08:03 921392 /lib/libnsl-2.12.1.so 7ff317184000-7ff317383000 ---p 00017000 08:03 921392 /lib/libnsl-2.12.1.so 7ff317383000-7ff317384000 r--p 00016000 08:03 921392 /lib/libnsl-2.12.1.so 7ff317384000-7ff317385000 rw-p 00017000 08:03 921392 /lib/libnsl-2.12.1.so 7ff317385000-7ff317387000 rw-p 00000000 00:00 0 7ff317387000-7ff3173b2000 r-xp 00000000 08:03 141850 /usr/lib/jvm/java-6-openjdk/jre/lib/amd64/libjava.so 7ff3173b2000-7ff3175b1000 ---p 0002b000 08:03 141850 /usr/lib/jvm/java-6-openjdk/jre/lib/amd64/libjava.so 7ff3175b1000-7ff3175b2000 r--p 0002a000 08:03 141850 /usr/lib/jvm/java-6-openjdk/jre/lib/amd64/libjava.so 7ff3175b2000-7ff3175b5000 rw-p 0002b000 08:03 141850 /usr/lib/jvm/java-6-openjdk/jre/lib/amd64/libjava.so 7ff3175b5000-7ff3175c3000 r-xp 00000000 08:03 141866 /usr/lib/jvm/java-6-openjdk/jre/lib/amd64/libverify.so 7ff3175c3000-7ff3177c2000 ---p 0000e000 08:03 141866 /usr/lib/jvm/java-6-openjdk/jre/lib/amd64/libverify.so 7ff3177c2000-7ff3177c4000 r--p 0000d000 08:03 141866 /usr/lib/jvm/java-6-openjdk/jre/lib/amd64/libverify.so 7ff3177c4000-7ff3177c5000 rw-p 0000f000 08:03 141866 /usr/lib/jvm/java-6-openjdk/jre/lib/amd64/libverify.so 7ff3177c5000-7ff3177cc000 r-xp 00000000 08:03 921405 /lib/librt-2.12.1.so 7ff3177cc000-7ff3179cb000 ---p 00007000 08:03 921405 /lib/librt-2.12.1.so 7ff3179cb000-7ff3179cc000 r--p 00006000 08:03 921405 /lib/librt-2.12.1.so 7ff3179cc000-7ff3179cd000 rw-p 00007000 08:03 921405 /lib/librt-2.12.1.so 7ff3179cd000-7ff317a4f000 r-xp 00000000 08:03 921390 /lib/libm-2.12.1.so 7ff317a4f000-7ff317c4e000 ---p 00082000 08:03 921390 /lib/libm-2.12.1.so 7ff317c4e000-7ff317c4f000 r--p 00081000 08:03 921390 /lib/libm-2.12.1.so 7ff317c4f000-7ff317c50000 rw-p 00082000 08:03 921390 /lib/libm-2.12.1.so 7ff317c50000-7ff3184c4000 r-xp 00000000 08:03 141871 /usr/lib/jvm/java-6-openjdk/jre/lib/amd64/server/libjvm.so 7ff3184c4000-7ff3186c3000 ---p 00874000 08:03 141871 /usr/lib/jvm/java-6-openjdk/jre/lib/amd64/server/libjvm.so 7ff3186c3000-7ff318739000 r--p 00873000 08:03 141871 /usr/lib/jvm/java-6-openjdk/jre/lib/amd64/server/libjvm.so 7ff318739000-7ff318754000 rw-p 008e9000 08:03 141871 /usr/lib/jvm/java-6-openjdk/jre/lib/amd64/server/libjvm.so 7ff318754000-7ff31878d000 rw-p 00000000 00:00 0 7ff31878d000-7ff318907000 r-xp 00000000 08:03 921385 /lib/libc-2.12.1.so 7ff318907000-7ff318b06000 ---p 0017a000 08:03 921385 /lib/libc-2.12.1.so 7ff318b06000-7ff318b0a000 r--p 00179000 08:03 921385 /lib/libc-2.12.1.so 7ff318b0a000-7ff318b0b000 rw-p 0017d000 08:03 921385 /lib/libc-2.12.1.so 7ff318b0b000-7ff318b10000 rw-p 00000000 00:00 0 7ff318b10000-7ff318b12000 r-xp 00000000 08:03 921388 /lib/libdl-2.12.1.so 7ff318b12000-7ff318d12000 ---p 00002000 08:03 921388 /lib/libdl-2.12.1.so 7ff318d12000-7ff318d13000 r--p 00002000 08:03 921388 /lib/libdl-2.12.1.so 7ff318d13000-7ff318d14000 rw-p 00003000 08:03 921388 /lib/libdl-2.12.1.so 7ff318d14000-7ff318d18000 r-xp 00000000 08:03 141838 /usr/lib/jvm/java-6-openjdk/jre/lib/amd64/jli/libjli.so 7ff318d18000-7ff318f17000 ---p 00004000 08:03 141838 /usr/lib/jvm/java-6-openjdk/jre/lib/amd64/jli/libjli.so 7ff318f17000-7ff318f18000 r--p 00003000 08:03 141838 /usr/lib/jvm/java-6-openjdk/jre/lib/amd64/jli/libjli.so 7ff318f18000-7ff318f19000 rw-p 00004000 08:03 141838 /usr/lib/jvm/java-6-openjdk/jre/lib/amd64/jli/libjli.so 7ff318f19000-7ff318f31000 r-xp 00000000 08:03 921401 /lib/libpthread-2.12.1.so 7ff318f31000-7ff319130000 ---p 00018000 08:03 921401 /lib/libpthread-2.12.1.so 7ff319130000-7ff319131000 r--p 00017000 08:03 921401 /lib/libpthread-2.12.1.so 7ff319131000-7ff319132000 rw-p 00018000 08:03 921401 /lib/libpthread-2.12.1.so 7ff319132000-7ff319136000 rw-p 00000000 00:00 0 7ff319136000-7ff31914c000 r-xp 00000000 08:03 917772 /lib/libz.so.1.2.3.4 7ff31914c000-7ff31934c000 ---p 00016000 08:03 917772 /lib/libz.so.1.2.3.4 7ff31934c000-7ff31934d000 r--p 00016000 08:03 917772 /lib/libz.so.1.2.3.4 7ff31934d000-7ff31934e000 rw-p 00017000 08:03 917772 /lib/libz.so.1.2.3.4 7ff31934e000-7ff31936e000 r-xp 00000000 08:03 921379 /lib/ld-2.12.1.so 7ff319387000-7ff319391000 rw-p 00000000 00:00 0 7ff319391000-7ff319447000 rw-p 00000000 00:00 0 7ff319447000-7ff31944a000 ---p 00000000 00:00 0 7ff31944a000-7ff31954d000 rw-p 00000000 00:00 0 7ff319562000-7ff31956a000 rw-s 00000000 08:03 1966453 /tmp/hsperfdata_hjed/4041 7ff31956a000-7ff31956b000 rw-p 00000000 00:00 0 7ff31956b000-7ff31956c000 r--p 00000000 00:00 0 7ff31956c000-7ff31956e000 rw-p 00000000 00:00 0 7ff31956e000-7ff31956f000 r--p 00020000 08:03 921379 /lib/ld-2.12.1.so 7ff31956f000-7ff319570000 rw-p 00021000 08:03 921379 /lib/ld-2.12.1.so 7ff319570000-7ff319571000 rw-p 00000000 00:00 0 7fff0fb03000-7fff0fb24000 rw-p 00000000 00:00 0 [stack] 7fff0fbff000-7fff0fc00000 r-xp 00000000 00:00 0 [vdso] ffffffffff600000-ffffffffff601000 r-xp 00000000 00:00 0 [vsyscall] VM Arguments: jvm_args: -Dfile.encoding=UTF-8 java_command: test.Main Launcher Type: SUN_STANDARD Environment Variables: PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games USERNAME=hjed LD_LIBRARY_PATH=/usr/lib/jvm/java-6-openjdk/jre/lib/amd64/server:/usr/lib/jvm/java-6-openjdk/jre/lib/amd64:/usr/lib/jvm/java-6-openjdk/jre/../lib/amd64 SHELL=/bin/bash DISPLAY=:0.0 Signal Handlers: SIGSEGV: [libjvm.so+0x712700], sa_mask[0]=0x7ffbfeff, sa_flags=0x10000004 SIGBUS: [libjvm.so+0x712700], sa_mask[0]=0x7ffbfeff, sa_flags=0x10000004 SIGFPE: [libjvm.so+0x5d4020], sa_mask[0]=0x7ffbfeff, sa_flags=0x10000004 SIGPIPE: [libjvm.so+0x5d4020], sa_mask[0]=0x7ffbfeff, sa_flags=0x10000004 SIGXFSZ: [libjvm.so+0x5d4020], sa_mask[0]=0x7ffbfeff, sa_flags=0x10000004 SIGILL: [libjvm.so+0x5d4020], sa_mask[0]=0x7ffbfeff, sa_flags=0x10000004 SIGUSR1: SIG_DFL, sa_mask[0]=0x00000000, sa_flags=0x00000000 SIGUSR2: [libjvm.so+0x5d3730], sa_mask[0]=0x00000004, sa_flags=0x10000004 SIGHUP: [libjvm.so+0x5d61a0], sa_mask[0]=0x7ffbfeff, sa_flags=0x10000004 SIGINT: SIG_IGN, sa_mask[0]=0x00000000, sa_flags=0x00000000 SIGTERM: [libjvm.so+0x5d61a0], sa_mask[0]=0x7ffbfeff, sa_flags=0x10000004 SIGQUIT: [libjvm.so+0x5d61a0], sa_mask[0]=0x7ffbfeff, sa_flags=0x10000004 --------------- S Y S T E M --------------- OS:Ubuntu 10.10 (maverick) uname:Linux 2.6.35-24-generic #42-Ubuntu SMP Thu Dec 2 02:41:37 UTC 2010 x86_64 libc:glibc 2.12.1 NPTL 2.12.1 rlimit: STACK 8192k, CORE 0k, NPROC infinity, NOFILE 1024, AS infinity load average:0.25 0.16 0.21 /proc/meminfo: MemTotal: 4048200 kB MemFree: 1230476 kB Buffers: 589572 kB Cached: 911132 kB SwapCached: 0 kB Active: 1321712 kB Inactive: 1202272 kB Active(anon): 1023852 kB Inactive(anon): 7168 kB Active(file): 297860 kB Inactive(file): 1195104 kB Unevictable: 64 kB Mlocked: 64 kB SwapTotal: 7065596 kB SwapFree: 7065596 kB Dirty: 632 kB Writeback: 0 kB AnonPages: 1023368 kB Mapped: 145832 kB Shmem: 7728 kB Slab: 111136 kB SReclaimable: 66316 kB SUnreclaim: 44820 kB KernelStack: 3824 kB PageTables: 27736 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 9089696 kB Committed_AS: 2378396 kB VmallocTotal: 34359738367 kB VmallocUsed: 332928 kB VmallocChunk: 34359397884 kB HardwareCorrupted: 0 kB HugePages_Total: 0 HugePages_Free: 0 HugePages_Rsvd: 0 HugePages_Surp: 0 Hugepagesize: 2048 kB DirectMap4k: 67136 kB DirectMap2M: 4118528 kB CPU:total 8 (4 cores per cpu, 2 threads per core) family 6 model 26 stepping 5, cmov, cx8, fxsr, mmx, sse, sse2, sse3, ssse3, sse4.1, sse4.2, popcnt, ht Memory: 4k page, physical 4048200k(1230476k free), swap 7065596k(7065596k free) vm_info: OpenJDK 64-Bit Server VM (19.0-b09) for linux-amd64 JRE (1.6.0_20-b20), built on Dec 10 2010 19:45:55 by "buildd" with gcc 4.4.5 time: Sat Jan 1 14:12:27 2011 elapsed time: 0 seconds The java code is: ... public class Main { public static void main(String[] args) { ... ImageFile img = new ImageFile(System.getProperty("user.home") + "/PC100001.JPG"); Exiv2MetaDataStore e = new Exiv2MetaDataStore(img); Iterator<Entry<String, String>> i = e.entrySet().iterator(); while (i.hasNext()) { Entry<String, String> entry = i.next(); System.out.println(entry.getKey() + ":" + entry.getValue()); } //if you switch this print statment with the while loop you get the same error. // System.out.print(e.toString()); } } and /** NB: MetaDataStore is an abstract class that extends HashMap<String,String> */ public class Exiv2MetaDataStore extends MetaDataStore{ ... private final ImageFile F; /** * Creates an meta data store from an ImageFile using Exiv2 * this calls loadData(); * @param f */ public Exiv2MetaDataStore(ImageFile f) { F = f; loadData(); } ... @Override protected void loadData() { loadFromExiv2(); } ... private void loadFromExiv2() { impl_loadFromExiv(F.getAbsolutePath(), this); } private native void impl_loadFromExiv(String path, Exiv2MetaDataStore str); //this method called by the C++ code public void exiv2_reciveElement(String key, String value) { super.put(key,value); } static { Runtime.getRuntime().load("/home/hjed/libExiff2-binding.so"); } } C++ code: #include <exif.hpp> #include <image.hpp> #include <iptc.hpp> #include <exiv2/exiv2.hpp> #include <exiv2/error.hpp> #include <iostream> #include <iomanip> #include <cassert> void loadIPTC(Exiv2::Image::AutoPtr image, const char * path, JNIEnv * env, jobject obj) { Exiv2::IptcData &iptcData = image->iptcData(); //load method jclass cls = env->GetObjectClass(obj); jmethodID mid = env->GetMethodID(cls, "exiv2_reciveElement", "(Ljava/lang/String;Ljava/lang/String;)V"); //is there any IPTC data AND check that method exists if (iptcData.empty() | (mid == NULL)) { std::string error(path); error += ": failed loading IPTC data, there may not be any data"; } else { Exiv2::IptcData::iterator end = iptcData.end(); for (Exiv2::IptcData::iterator md = iptcData.begin(); md != end; ++md) { jvalue values[2]; const char* key = md->key().c_str(); values[0].l = env->NewStringUTF(key); md->value().toString().c_str(); const char* value = md->typeName(); values[2].l = env->NewStringUTF(value); //If I replace the code for values[2] with the commented out code I get the same error. //const char* type = md->typeName(); //values[2].l = env->NewStringUTF(type); env->CallVoidMethodA(obj, mid, values); } } } void getVars(const char* path, JNIEnv * env, jobject obj) { //Load image Exiv2::Image::AutoPtr image = Exiv2::ImageFactory::open(path); assert(image.get() != 0); image->readMetadata(); //Load IPTC data loadIPTC(image, path, env, obj); } JNIEXPORT void JNICALL Java_photo_exiv2_Exiv2MetaDataStore_impl_1loadFromExiv(JNIEnv * env, jobject obj, jstring path, jobject obj2) { const char* path2 = env->GetStringUTFChars(path, NULL); getVars(path2, env, obj); env->ReleaseStringUTFChars(path, path2); } I've searched for a fix for this, but I can't find one. I don't have much experience using C++ so if I've made an obvious mistake in the C code I apologies. Thanks for any help, HJED P.S. This is my first post on this site and I wasn't sure how much of the code I needed to show. Sorry if I've put to much up.

  Read the article

• Cisco ASA 5505 - L2TP over IPsec

  - by xraminx

  I have followed this document on cisco site to set up the L2TP over IPsec connection. When I try to establish a VPN to ASA 5505 from my Windows XP, after I click on "connect" button, the "Connecting ...." dialog box appears and after a while I get this error message: Error 800: Unable to establish VPN connection. The VPN server may be unreachable, or security parameters may not be configured properly for this connection. ASA version 7.2(4) ASDM version 5.2(4) Windows XP SP3 Windows XP and ASA 5505 are on the same LAN for test purposes. Edit 1: There are two VLANs defined on the cisco device (the standard setup on cisco ASA5505). - port 0 is on VLAN2, outside; - and ports 1 to 7 on VLAN1, inside. I run a cable from my linksys home router (10.50.10.1) to the cisco ASA5505 router on port 0 (outside). Port 0 have IP 192.168.1.1 used internally by cisco and I have also assigned the external IP 10.50.10.206 to port 0 (outside). I run a cable from Windows XP to Cisco router on port 1 (inside). Port 1 is assigned an IP from Cisco router 192.168.1.2. The Windows XP is also connected to my linksys home router via wireless (10.50.10.141). Edit 2: When I try to establish vpn, the Cisco device real time Log viewer shows 7 entries like this: Severity:5 Date:Sep 15 2009 Time: 14:51:29 SyslogID: 713904 Destination IP = 10.50.10.141, Decription: No crypto map bound to interface... dropping pkt Edit 3: This is the setup on the router right now. Result of the command: "show run" : Saved : ASA Version 7.2(4) ! hostname ciscoasa domain-name default.domain.invalid enable password HGFHGFGHFHGHGFHGF encrypted passwd NMMNMNMNMNMNMN encrypted names name 192.168.1.200 WebServer1 name 10.50.10.206 external-ip-address ! interface Vlan1 nameif inside security-level 100 ip address 192.168.1.1 255.255.255.0 ! interface Vlan2 nameif outside security-level 0 ip address external-ip-address 255.0.0.0 ! interface Vlan3 no nameif security-level 50 no ip address ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 ! interface Ethernet0/3 ! interface Ethernet0/4 ! interface Ethernet0/5 ! interface Ethernet0/6 ! interface Ethernet0/7 ! ftp mode passive dns server-group DefaultDNS domain-name default.domain.invalid object-group service l2tp udp port-object eq 1701 access-list outside_access_in remark Allow incoming tcp/http access-list outside_access_in extended permit tcp any host WebServer1 eq www access-list outside_access_in extended permit udp any any eq 1701 access-list inside_nat0_outbound extended permit ip any 192.168.1.208 255.255.255.240 access-list inside_cryptomap_1 extended permit ip interface outside interface inside pager lines 24 logging enable logging asdm informational mtu inside 1500 mtu outside 1500 ip local pool PPTP-VPN 192.168.1.210-192.168.1.220 mask 255.255.255.0 icmp unreachable rate-limit 1 burst-size 1 asdm image disk0:/asdm-524.bin no asdm history enable arp timeout 14400 global (outside) 1 interface nat (inside) 0 access-list inside_nat0_outbound nat (inside) 1 0.0.0.0 0.0.0.0 static (inside,outside) tcp interface www WebServer1 www netmask 255.255.255.255 access-group outside_access_in in interface outside timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute http server enable http 192.168.1.0 255.255.255.0 inside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec transform-set TRANS_ESP_3DES_SHA esp-3des esp-sha-hmac crypto ipsec transform-set TRANS_ESP_3DES_SHA mode transport crypto ipsec transform-set TRANS_ESP_3DES_MD5 esp-3des esp-md5-hmac crypto ipsec transform-set TRANS_ESP_3DES_MD5 mode transport crypto map outside_map 1 match address inside_cryptomap_1 crypto map outside_map 1 set transform-set TRANS_ESP_3DES_MD5 crypto map outside_map interface inside crypto isakmp enable outside crypto isakmp policy 10 authentication pre-share encryption 3des hash md5 group 2 lifetime 86400 telnet timeout 5 ssh timeout 5 console timeout 0 dhcpd auto_config outside ! dhcpd address 192.168.1.2-192.168.1.33 inside dhcpd enable inside ! group-policy DefaultRAGroup internal group-policy DefaultRAGroup attributes dns-server value 192.168.1.1 vpn-tunnel-protocol IPSec l2tp-ipsec username myusername password FGHFGHFHGFHGFGFHF nt-encrypted tunnel-group DefaultRAGroup general-attributes address-pool PPTP-VPN default-group-policy DefaultRAGroup tunnel-group DefaultRAGroup ipsec-attributes pre-shared-key * tunnel-group DefaultRAGroup ppp-attributes no authentication chap authentication ms-chap-v2 ! ! prompt hostname context Cryptochecksum:a9331e84064f27e6220a8667bf5076c1 : end

  Read the article

• Cisco PIX 8.0.4, static address mapping not working?

  - by Bill

  upgrading a working Pix running 5.3.1 to 8.0.4. The memory/IOS upgrade went fine, but the 8.0.4 configuration is not quite working 100%. The 5.3.1 config on which it was based is working fine. Basically, I have three networks (inside, outside, dmz) with some addresses on the dmz statically mapped to outside addresses. The problem seems to be that those addresses can't send or receive traffic from the outside (Internet.) Stuff on the DMZ that does not have a static mapping seems to work fine. So, basically: Inside - outside: works Inside - DMZ: works DMZ - inside: works, where the rules allow it DMZ (non-static) - outside: works But: DMZ (static) - outside: fails Outside - DMZ: fails (So, say, udp 1194 traffic to .102, http to .104) I suspect there's something I'm missing with the nat/global section of the config, but can't for the life of me figure out what. Help, anyone? The complete configuration is below. Thanks for any thoughts! ! PIX Version 8.0(4) ! hostname firewall domain-name asasdkpaskdspakdpoak.com enable password xxxxxxxx encrypted passwd xxxxxxxx encrypted names ! interface Ethernet0 nameif outside security-level 0 ip address XX.XX.XX.100 255.255.255.224 ! interface Ethernet1 nameif inside security-level 100 ip address 192.168.68.1 255.255.255.0 ! interface Ethernet2 nameif dmz security-level 10 ip address 192.168.69.1 255.255.255.0 ! boot system flash:/image.bin ftp mode passive dns server-group DefaultDNS domain-name asasdkpaskdspakdpoak.com access-list acl_out extended permit udp any host XX.XX.XX.102 eq 1194 access-list acl_out extended permit tcp any host XX.XX.XX.104 eq www access-list acl_dmz extended permit tcp host 192.168.69.10 host 192.168.68.17 eq ssh access-list acl_dmz extended permit tcp 10.71.83.0 255.255.255.0 192.168.68.0 255.255.255.0 eq ssh access-list acl_dmz extended permit tcp 10.71.83.0 255.255.255.0 192.168.68.0 255.255.255.0 eq 5901 access-list acl_dmz extended permit udp host 192.168.69.103 any eq ntp access-list acl_dmz extended permit udp host 192.168.69.103 any eq domain access-list acl_dmz extended permit tcp host 192.168.69.103 any eq www access-list acl_dmz extended permit tcp host 192.168.69.100 host 192.168.68.101 eq 3306 access-list acl_dmz extended permit tcp host 192.168.69.100 host 192.168.68.102 eq 3306 access-list acl_dmz extended permit tcp host 192.168.69.101 host 192.168.68.101 eq 3306 access-list acl_dmz extended permit tcp host 192.168.69.101 host 192.168.68.102 eq 3306 access-list acl_dmz extended permit tcp 10.71.83.0 255.255.255.0 host 192.168.68.101 eq 3306 access-list acl_dmz extended permit tcp 10.71.83.0 255.255.255.0 host 192.168.68.102 eq 3306 access-list acl_dmz extended permit tcp host 192.168.69.104 host 192.168.68.101 eq 3306 access-list acl_dmz extended permit tcp host 192.168.69.104 host 192.168.68.102 eq 3306 access-list acl_dmz extended permit tcp 10.71.83.0 255.255.255.0 host 192.168.69.104 eq 8080 access-list acl_dmz extended permit tcp 10.71.83.0 255.255.255.0 host 192.168.69.104 eq 8099 access-list acl_dmz extended permit tcp host 192.168.69.105 any eq www access-list acl_dmz extended permit tcp host 192.168.69.103 any eq smtp access-list acl_dmz extended permit tcp host 192.168.69.105 host 192.168.68.103 eq ssh access-list acl_dmz extended permit tcp host 192.168.69.104 any eq www access-list acl_dmz extended permit tcp host 192.168.69.100 any eq www access-list acl_dmz extended permit tcp host 192.168.69.100 any eq https pager lines 24 mtu outside 1500 mtu inside 1500 mtu dmz 1500 icmp unreachable rate-limit 1 burst-size 1 no asdm history enable arp timeout 14400 global (outside) 1 interface nat (inside) 1 0.0.0.0 0.0.0.0 nat (dmz) 1 0.0.0.0 0.0.0.0 static (dmz,outside) XX.XX.XX.103 192.168.69.11 netmask 255.255.255.255 static (inside,dmz) 192.168.68.17 192.168.68.17 netmask 255.255.255.255 static (inside,dmz) 192.168.68.100 192.168.68.100 netmask 255.255.255.255 static (inside,dmz) 192.168.68.101 192.168.68.101 netmask 255.255.255.255 static (inside,dmz) 192.168.68.102 192.168.68.102 netmask 255.255.255.255 static (inside,dmz) 192.168.68.103 192.168.68.103 netmask 255.255.255.255 static (dmz,outside) XX.XX.XX.104 192.168.69.100 netmask 255.255.255.255 static (dmz,outside) XX.XX.XX.105 192.168.69.105 netmask 255.255.255.255 static (dmz,outside) XX.XX.XX.102 192.168.69.10 netmask 255.255.255.255 access-group acl_out in interface outside access-group acl_dmz in interface dmz route outside 0.0.0.0 0.0.0.0 XX.XX.XX.97 1 route dmz 10.71.83.0 255.255.255.0 192.168.69.10 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute dynamic-access-policy-record DfltAccessPolicy no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec security-association lifetime seconds 28800 crypto ipsec security-association lifetime kilobytes 4608000 telnet 192.168.68.17 255.255.255.255 inside telnet timeout 5 ssh timeout 5 console timeout 0 threat-detection basic-threat threat-detection statistics access-list no threat-detection statistics tcp-intercept ! class-map inspection_default match default-inspection-traffic ! ! policy-map type inspect dns preset_dns_map parameters message-length maximum 512 policy-map global_policy class inspection_default inspect dns preset_dns_map inspect ftp inspect h323 h225 inspect h323 ras inspect netbios inspect rsh inspect rtsp inspect skinny inspect esmtp inspect sqlnet inspect sunrpc inspect tftp inspect sip inspect xdmcp ! service-policy global_policy global prompt hostname context Cryptochecksum:2d1bb2dee2d7a3e45db63a489102d7de

  Read the article

• Cisco ASA 5505 - L2TP over IPsec

  - by xraminx

  I have followed this document on cisco site to set up the L2TP over IPsec connection. When I try to establish a VPN to ASA 5505 from my Windows XP, after I click on "connect" button, the "Connecting ...." dialog box appears and after a while I get this error message: Error 800: Unable to establish VPN connection. The VPN server may be unreachable, or security parameters may not be configured properly for this connection. ASA version 7.2(4) ASDM version 5.2(4) Windows XP SP3 Windows XP and ASA 5505 are on the same LAN for test purposes. Edit 1: There are two VLANs defined on the cisco device (the standard setup on cisco ASA5505). - port 0 is on VLAN2, outside; - and ports 1 to 7 on VLAN1, inside. I run a cable from my linksys home router (10.50.10.1) to the cisco ASA5505 router on port 0 (outside). Port 0 have IP 192.168.1.1 used internally by cisco and I have also assigned the external IP 10.50.10.206 to port 0 (outside). I run a cable from Windows XP to Cisco router on port 1 (inside). Port 1 is assigned an IP from Cisco router 192.168.1.2. The Windows XP is also connected to my linksys home router via wireless (10.50.10.141). Edit 2: When I try to establish vpn, the Cisco device real time Log viewer shows 7 entries like this: Severity:5 Date:Sep 15 2009 Time: 14:51:29 SyslogID: 713904 Destination IP = 10.50.10.141, Decription: No crypto map bound to interface... dropping pkt Edit 3: This is the setup on the router right now. Result of the command: "show run" : Saved : ASA Version 7.2(4) ! hostname ciscoasa domain-name default.domain.invalid enable password HGFHGFGHFHGHGFHGF encrypted passwd NMMNMNMNMNMNMN encrypted names name 192.168.1.200 WebServer1 name 10.50.10.206 external-ip-address ! interface Vlan1 nameif inside security-level 100 ip address 192.168.1.1 255.255.255.0 ! interface Vlan2 nameif outside security-level 0 ip address external-ip-address 255.0.0.0 ! interface Vlan3 no nameif security-level 50 no ip address ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 ! interface Ethernet0/3 ! interface Ethernet0/4 ! interface Ethernet0/5 ! interface Ethernet0/6 ! interface Ethernet0/7 ! ftp mode passive dns server-group DefaultDNS domain-name default.domain.invalid object-group service l2tp udp port-object eq 1701 access-list outside_access_in remark Allow incoming tcp/http access-list outside_access_in extended permit tcp any host WebServer1 eq www access-list outside_access_in extended permit udp any any eq 1701 access-list inside_nat0_outbound extended permit ip any 192.168.1.208 255.255.255.240 access-list inside_cryptomap_1 extended permit ip interface outside interface inside pager lines 24 logging enable logging asdm informational mtu inside 1500 mtu outside 1500 ip local pool PPTP-VPN 192.168.1.210-192.168.1.220 mask 255.255.255.0 icmp unreachable rate-limit 1 burst-size 1 asdm image disk0:/asdm-524.bin no asdm history enable arp timeout 14400 global (outside) 1 interface nat (inside) 0 access-list inside_nat0_outbound nat (inside) 1 0.0.0.0 0.0.0.0 static (inside,outside) tcp interface www WebServer1 www netmask 255.255.255.255 access-group outside_access_in in interface outside timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute http server enable http 192.168.1.0 255.255.255.0 inside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec transform-set TRANS_ESP_3DES_SHA esp-3des esp-sha-hmac crypto ipsec transform-set TRANS_ESP_3DES_SHA mode transport crypto ipsec transform-set TRANS_ESP_3DES_MD5 esp-3des esp-md5-hmac crypto ipsec transform-set TRANS_ESP_3DES_MD5 mode transport crypto map outside_map 1 match address inside_cryptomap_1 crypto map outside_map 1 set transform-set TRANS_ESP_3DES_MD5 crypto map outside_map interface inside crypto isakmp enable outside crypto isakmp policy 10 authentication pre-share encryption 3des hash md5 group 2 lifetime 86400 telnet timeout 5 ssh timeout 5 console timeout 0 dhcpd auto_config outside ! dhcpd address 192.168.1.2-192.168.1.33 inside dhcpd enable inside ! group-policy DefaultRAGroup internal group-policy DefaultRAGroup attributes dns-server value 192.168.1.1 vpn-tunnel-protocol IPSec l2tp-ipsec username myusername password FGHFGHFHGFHGFGFHF nt-encrypted tunnel-group DefaultRAGroup general-attributes address-pool PPTP-VPN default-group-policy DefaultRAGroup tunnel-group DefaultRAGroup ipsec-attributes pre-shared-key * tunnel-group DefaultRAGroup ppp-attributes no authentication chap authentication ms-chap-v2 ! ! prompt hostname context Cryptochecksum:a9331e84064f27e6220a8667bf5076c1 : end

  Read the article

• Why doesn't Mail.app properly thread Microsoft Outlook replies?

  - by thepurplepixel

  I use Mail.app 3.6 (on 10.5 Leopard), and I always use plain-text email. Normally, when I receive an email reply from practically anyone, it looks like this (test message sent from Mail.app, replied from Hotmail, replied from Google Apps): Needless to say, I quite like this threading, and it keeps everything very visually-organized. However, when I receive a plain-text email reply from people on Microsoft Outlook (tested with Outlook 2003 & 2007), it isn't threaded like the image. Instead, it appears as below, without being threaded nicely. My reply to the message. -----Original Message----- From: Tyson Moore [mailto:[email protected]] Sent: [Date] To: [Receiver] Subject: Test Original message. Through looking at the source of my original message, it appears as though every time the message is quoted, less-than signs (<) are inserted before every line in the reply. I am assuming this is what triggers the quoting behaviour exhibited by Mail.app, but I'm no expert. My question: is this a Mail.app limitation in not recognizing the -----Original Message----- line put in by Outlook, or an Outlook problem not inserting > before every line in a reply (or both)?

  Read the article

• guvcview recording video and audio out of synchronisation in Ubuntu 10.10

  - by SIJAR

  I finally got Guvcview, a great software for Logitech webcam and it does all the stuff that one wants out of it. But I'm not satisfy with the video recording, video and audio out of synchronisation also video seems to be in slow motion. Please help so that I can tweak in and get a good video recording with the webcam. Below is the log of Guvcview ------------------------------------------------------------------------------- guvcview 1.4.1 video_device: /dev/video0 vid_sleep: 0 cap_meth: 1 resolution: 640 x 480 windowsize: 1024 x 715 vert pane: 578 spin behavior: 0 mode: mjpg fps: 1/25 Display Fps: 0 bpp: 0 hwaccel: 1 avi_format: 4 sound: 1 sound Device: 4 sound samp rate: 0 sound Channels: 0 Sound delay: 0 nanosec Sound Format: 85 Pan Step: 2 degrees Tilt Step: 2 degrees Video Filter Flags: 0 image inc: 0 profile(default):/home/sijar/default.gpfl starting portaudio... bt_audio_service_open: connect() failed: Connection refused (111) bt_audio_service_open: connect() failed: Connection refused (111) bt_audio_service_open: connect() failed: Connection refused (111) bt_audio_service_open: connect() failed: Connection refused (111) Cannot connect to server socket err = No such file or directory Cannot connect to server socket jack server is not running or cannot be started language catalog= dir:/usr/share/locale type:UTF-8 lang:en_US.utf8 cat:guvcview.mo mjpg: setting format to 1196444237 capture method = 1 video device: /dev/video0 libv4lconvert: warning more framesizes then I can handle! libv4lconvert: warning more framesizes then I can handle! /dev/video0 - device 1 libv4lconvert: warning more framesizes then I can handle! libv4lconvert: warning more framesizes then I can handle! Init. UVC Camera (046d:0825) (location: usb-0000:00:1d.7-5) { pixelformat = 'YUYV', description = 'YUV 4:2:2 (YUYV)' } { discrete: width = 640, height = 480 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 160, height = 120 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 176, height = 144 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 320, height = 176 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 320, height = 240 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 352, height = 288 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 432, height = 240 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 544, height = 288 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 640, height = 360 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, ... repeats a couple of times ... vid:046d pid:0825 driver:uvcvideo Adding control for Pan (relative) UVCIOC_CTRL_ADD - Error: Operation not permitted checking format: 1196444237 VIDIOC_G_COMP:: Invalid argument compression control not supported fps is set to 1/25 drawing controls control[0]: 0x980900 Brightness, 0:255:1, default 128 control[0]: 0x980901 Contrast, 0:255:1, default 32 control[0]: 0x980902 Saturation, 0:255:1, default 32 control[0]: 0x98090c White Balance Temperature, Auto, 0:1:1, default 1 control[0]: 0x980913 Gain, 0:255:1, default 0 control[0]: 0x980918 Power Line Frequency, 0:2:1, default 2 control[0]: 0x98091a White Balance Temperature, 0:10000:10, default 4000 control[0]: 0x98091b Sharpness, 0:255:1, default 24 control[0]: 0x98091c Backlight Compensation, 0:1:1, default 1 control[0]: 0x9a0901 Exposure, Auto, 0:3:1, default 3 control[0]: 0x9a0902 Exposure (Absolute), 1:10000:1, default 166 control[0]: 0x9a0903 Exposure, Auto Priority, 0:1:1, default 0 resolutions of format(2) = 19 frame rates of 1º resolution=6 Def. Res: 0 numb. fps:6 --------------------------------------- device #0 Name = Intel 82801DB-ICH4: Intel 82801DB-ICH4 (hw:0,0) Host API = ALSA Max inputs = 2, Max outputs = 2 Def. low input latency = 0.012 Def. low output latency = 0.012 Def. high input latency = 0.046 Def. high output latency = 0.046 Def. sample rate = 44100.00 --------------------------------------- device #1 Name = Intel 82801DB-ICH4: Intel 82801DB-ICH4 - MIC ADC (hw:0,1) Host API = ALSA Max inputs = 2, Max outputs = 0 Def. low input latency = 0.011 Def. low output latency = -1.000 Def. high input latency = 0.043 Def. high output latency = -1.000 Def. sample rate = 48000.00 --------------------------------------- device #2 Name = Intel 82801DB-ICH4: Intel 82801DB-ICH4 - MIC2 ADC (hw:0,2) Host API = ALSA Max inputs = 2, Max outputs = 0 Def. low input latency = 0.011 Def. low output latency = -1.000 Def. high input latency = 0.043 Def. high output latency = -1.000 Def. sample rate = 48000.00 --------------------------------------- device #3 Name = Intel 82801DB-ICH4: Intel 82801DB-ICH4 - ADC2 (hw:0,3) Host API = ALSA Max inputs = 2, Max outputs = 0 Def. low input latency = 0.011 Def. low output latency = -1.000 Def. high input latency = 0.043 Def. high output latency = -1.000 Def. sample rate = 48000.00 --------------------------------------- device #4 Name = Intel 82801DB-ICH4: Intel 82801DB-ICH4 - IEC958 (hw:0,4) Host API = ALSA Max inputs = 0, Max outputs = 2 Def. low input latency = -1.000 Def. low output latency = 0.011 Def. high input latency = -1.000 Def. high output latency = 0.043 Def. sample rate = 48000.00 --------------------------------------- device #5 Name = USB Device 0x46d:0x825: USB Audio (hw:1,0) Host API = ALSA Max inputs = 1, Max outputs = 0 Def. low input latency = 0.011 Def. low output latency = -1.000 Def. high input latency = 0.043 Def. high output latency = -1.000 Def. sample rate = 48000.00 --------------------------------------- device #6 Name = front Host API = ALSA Max inputs = 0, Max outputs = 2 Def. low input latency = -1.000 Def. low output latency = 0.012 Def. high input latency = -1.000 Def. high output latency = 0.046 Def. sample rate = 44100.00 --------------------------------------- device #7 Name = iec958 Host API = ALSA Max inputs = 0, Max outputs = 2 Def. low input latency = -1.000 Def. low output latency = 0.011 Def. high input latency = -1.000 Def. high output latency = 0.043 Def. sample rate = 48000.00 --------------------------------------- device #8 Name = spdif Host API = ALSA Max inputs = 0, Max outputs = 2 Def. low input latency = -1.000 Def. low output latency = 0.011 Def. high input latency = -1.000 Def. high output latency = 0.043 Def. sample rate = 48000.00 --------------------------------------- device #9 Name = pulse Host API = ALSA Max inputs = 32, Max outputs = 32 Def. low input latency = 0.012 Def. low output latency = 0.012 Def. high input latency = 0.046 Def. high output latency = 0.046 Def. sample rate = 44100.00 --------------------------------------- device #10 Name = dmix Host API = ALSA Max inputs = 0, Max outputs = 2 Def. low input latency = -1.000 Def. low output latency = 0.043 Def. high input latency = -1.000 Def. high output latency = 0.043 Def. sample rate = 48000.00 --------------------------------------- device #11 [ Default Input, Default Output ] Name = default Host API = ALSA Max inputs = 32, Max outputs = 32 Def. low input latency = 0.012 Def. low output latency = 0.012 Def. high input latency = 0.046 Def. high output latency = 0.046 Def. sample rate = 44100.00 ---------------------------------------------- SampleRate:0 Channels:0 Video driver: x11 A window manager is available VIDIOC_S_EXT_CTRLS for multiple controls failed (error -1) using VIDIOC_S_CTRL for user class controls control(0x0098091a) "White Balance Temperature" failed to set (error -1) VIDIOC_S_EXT_CTRLS for multiple controls failed (error -1) using VIDIOC_S_EXT_CTRLS on single controls for class: 0x009a0000 control(0x009a0902) "Exposure (Absolute)" failed to set (error -1) VIDIOC_S_EXT_CTRLS for multiple controls failed (error -1) using VIDIOC_S_CTRL for user class controls control(0x0098091a) "White Balance Temperature" failed to set (error -1) VIDIOC_S_EXT_CTRLS for multiple controls failed (error -1) using VIDIOC_S_EXT_CTRLS on single controls for class: 0x009a0000 control(0x009a0902) "Exposure (Absolute)" failed to set (error -1) Cap Video toggled: 1 (/home/sijar/Videos/Webcam) 25371756K bytes free on a total of 39908968K (used: 36 %) treshold=51200K using audio codec: 0x0055 Audio frame size is 1152 samples for selected codec IO thread started...OK [libx264 @ 0x8cbd8b0]using cpu capabilities: MMX2 SSE2 Cache64 [libx264 @ 0x8cbd8b0]profile Baseline, level 3.0 [libx264 @ 0x8cbd8b0]non-strictly-monotonic PTS shift sound by -9 ms shift sound by -9 ms shift sound by -9 ms AUDIO: droping audio data AUDIO: droping audio data AUDIO: droping audio data AUDIO: droping audio data AUDIO: droping audio data ... repeats a couple of times ... AUDIO: droping audio data (/home/sijar/Videos/Webcam) 25371748K bytes free on a total of 39908968K (used: 36 %) treshold=51200K AUDIO: droping audio data AUDIO: droping audio data ... repeats a couple of times ... Cap Video toggled: 0 Shuting Down IO Thread AUDIO: droping audio data stop= 4426644744000 start=4416533023000 VIDEO: 146 frames in 10111.000000 ms = 14.439719 fps Stoping audio stream Closing audio stream... close avi Last message repeated 145 times [libx264 @ 0x8cbd8b0]frame I:2 Avg QP:14.10 size: 24492 [libx264 @ 0x8cbd8b0]frame P:103 Avg QP:16.06 size: 20715 [libx264 @ 0x8cbd8b0]mb I I16..4: 48.4% 0.0% 51.6% [libx264 @ 0x8cbd8b0]mb P I16..4: 57.5% 0.0% 0.0% P16..4: 40.2% 0.0% 0.0% 0.0% 0.0% skip: 2.3% [libx264 @ 0x8cbd8b0]final ratefactor: 62.05 [libx264 @ 0x8cbd8b0]coded y,uvDC,uvAC intra: 79.7% 92.2% 68.4% inter: 62.4% 87.5% 48.0% [libx264 @ 0x8cbd8b0]i16 v,h,dc,p: 23% 17% 41% 19% [libx264 @ 0x8cbd8b0]i4 v,h,dc,ddl,ddr,vr,hd,vl,hu: 30% 24% 26% 2% 5% 3% 3% 3% 4% [libx264 @ 0x8cbd8b0]i8c dc,h,v,p: 53% 20% 23% 4% [libx264 @ 0x8cbd8b0]ref P L0: 63.0% 37.0% [libx264 @ 0x8cbd8b0]kb/s:-0.00 total frames encoded: 0 total audio frames encoded: 0 IO thread finished...OK IO Thread finished enabling controls Cap Video toggled: 1 (/home/sijar/Videos/Webcam) 25379744K bytes free on a total of 39908968K (used: 36 %) treshold=51200K using audio codec: 0x0055 Audio frame size is 1152 samples for selected codec IO thread started...OK [libx264 @ 0x8cfba20]using cpu capabilities: MMX2 SSE2 Cache64 [libx264 @ 0x8cfba20]profile Baseline, level 3.0 [libx264 @ 0x8cfba20]non-strictly-monotonic PTS shift sound by -236 ms shift sound by -236 ms shift sound by -236 ms (/home/sijar/Videos/Webcam) 25377044K bytes free on a total of 39908968K (used: 36 %) treshold=51200K (/home/sijar/Videos/Webcam) 25373408K bytes free on a total of 39908968K (used: 36 %) treshold=51200K AUDIO: droping audio data AUDIO: droping audio data AUDIO: droping audio data AUDIO: droping audio data AUDIO: droping audio data AUDIO: droping audio data ... repeats a couple of times ... (/home/sijar/Videos/Webcam) 25370696K bytes free on a total of 39908968K (used: 36 %) treshold=51200K AUDIO: droping audio data AUDIO: droping audio data AUDIO: droping audio data ... repeats a couple of times ... (/home/sijar/Videos/Webcam) 25367680K bytes free on a total of 39908968K (used: 36 %) treshold=51200K (/home/sijar/Videos/Webcam) 25364052K bytes free on a total of 39908968K (used: 36 %) treshold=51200K (/home/sijar/Videos/Webcam) 25360312K bytes free on a total of 39908968K (used: 36 %) treshold=51200K (/home/sijar/Videos/Webcam) 25356628K bytes free on a total of 39908968K (used: 36 %) treshold=51200K (/home/sijar/Videos/Webcam) 25352908K bytes free on a total of 39908968K (used: 36 %) treshold=51200K (/home/sijar/Videos/Webcam) 25349316K bytes free on a total of 39908968K (used: 36 %) treshold=51200K (/home/sijar/Videos/Webcam) 25345552K bytes free on a total of 39908968K (used: 36 %) treshold=51200K (/home/sijar/Videos/Webcam) 25341828K bytes free on a total of 39908968K (used: 36 %) treshold=51200K (/home/sijar/Videos/Webcam) 25338092K bytes free on a total of 39908968K (used: 36 %) treshold=51200K (/home/sijar/Videos/Webcam) 25334412K bytes free on a total of 39908968K (used: 36 %) treshold=51200K Cap Video toggled: 0 Shuting Down IO Thread stop= 4708817235000 start=4578624714000 VIDEO: 1604 frames in 130192.000000 ms = 12.320265 fps Stoping audio stream Closing audio stream... close avi Last message repeated 1603 times [libx264 @ 0x8cfba20]frame I:16 Avg QP:14.78 size: 42627 [libx264 @ 0x8cfba20]frame P:1547 Avg QP:16.44 size: 28599 [libx264 @ 0x8cfba20]mb I I16..4: 21.6% 0.0% 78.4% [libx264 @ 0x8cfba20]mb P I16..4: 28.1% 0.0% 0.0% P16..4: 70.5% 0.0% 0.0% 0.0% 0.0% skip: 1.4% [libx264 @ 0x8cfba20]final ratefactor: 88.17 [libx264 @ 0x8cfba20]coded y,uvDC,uvAC intra: 74.4% 95.8% 83.2% inter: 75.2% 94.6% 69.2% [libx264 @ 0x8cfba20]i16 v,h,dc,p: 27% 17% 40% 16% [libx264 @ 0x8cfba20]i4 v,h,dc,ddl,ddr,vr,hd,vl,hu: 25% 25% 21% 3% 6% 4% 5% 4% 7% [libx264 @ 0x8cfba20]i8c dc,h,v,p: 61% 18% 18% 4% [libx264 @ 0x8cfba20]ref P L0: 64.0% 36.0% [libx264 @ 0x8cfba20]kb/s:-0.00 total frames encoded: 0 total audio frames encoded: 0 IO thread finished...OK IO Thread finished enabling controls Shuting Down Thread Thread terminated... cleaning Thread allocations: 100% SDL Quit Video Thread finished write /home/sijar/.guvcviewrc OK free audio mutex closed v4l2 strutures free controls free controls - vidState cleaned allocations - 100% Closing portaudio ...OK Closing GTK... OK

  Read the article

• Problem with WCF-SQL Adapter

  - by Paul Petrov

  When using WCF receive adapter with SQL binding in Polling mode please be aware of the following problem. Problem: At some regular but seemingly random intervals the application stops processing new requests, places a lock on the database and prevent other application from accessing it. Initially it looked like DTC issue, as it was distributed transaction that stalled most of the time. Symptoms: Orchestration instances in Dehydrated state, receive location not picking up new messages, exclusive locks on database tables, errors in DTC trace. Cause: Microsoft has confirmed that there is a bug in the WCF-SQL adapter. In the receive adapter binding configuration there's receiveTimeout property set to 10 minutes by default. If during this period data is not found in the table the adapter would start new thread and allocate more memory without releasing old resources. Thus if there's no new data in the table for a long time a new thread will be created in the host instance every 10 minutes until it reaches threshold (1000) and then there's no threads left for this host instance and it can't start/complete any tasks. Then this host instance won't be able to do anything. If other artifacts are hosted in the instance they will suffer consequences as well. Solution: - Set receiveTimeout to the maximum time 24.20:31:23.6470000. - Place WCF-SQL receive locations in separate host to provide its own thread pool and eliminate impact on other processes - Ensure WCF-SQL dedicated host instances are restarted at interval less or equal to receiveTimeout to flush threads and memory - Monitor performance counters Process/Thread Count/BTSNTSvc{n} for thread count trend and respond to alert if it grows by restarting host instance If you use WCF-SQL Adapter in the Notification mode then make sure to remove sqlAdapterInboundTransactionBehavior otherwise this location will exhibit the same issue. In this case though, setting receiveTimeout doesn't help and new thread will be created at default intervals (10 min) ignoring maximum setting.

  Read the article

• What is the reason of "Transaction context in use by another session"

  - by Shrike

  Hi, I'm looking for a description of the root of this error: "Transaction context in use by another session". I get it sometimes in one of my unittests so I can't provider repro code. But I wonder what is "by design" reason for the error. I've found this post: http://blogs.msdn.com/asiatech/archive/2009/08/10/system-transaction-may-fail-in-multiple-thread-environment.aspx and also that: http://msdn.microsoft.com/en-us/library/ff649002.aspx But I can't understand what "Multiple threads sharing the same transaction in a transaction scope will cause the following exception: 'Transaction context in use by another session.' " means. All words are understandable but not the point. I actually can share a system transaction between threads. And there is even special mechanism for this - DependentTransaction class and Transaction.DependentClone method. I'm trying to reproduce a usecase from the first post: 1. Main thread creates DTC transaction, receives DependentTransaction (created using Transaction.Current.DependentClone on the main thread 2. Child thread 1 enlists in this DTC transaction by creating a transaction scope based on the dependent transaction (passed via constructor) 3. Child thread 1 opens a connection 4. Child thread 2 enlists in DTC transaction by creating a transaction scope based on the dependent transaction (passed via constructor) 5. Child thread 2 opens a connection with such code: using System; using System.Threading; using System.Transactions; using System.Data; using System.Data.SqlClient; public class Program { private static string ConnectionString = "Initial Catalog=DB;Data Source=.;User ID=user;PWD=pwd;"; public static void Main() { int MAX = 100; for(int i =0; i< MAX;i++) { using(var ctx = new TransactionScope()) { var tx = Transaction.Current; // make the transaction distributed using (SqlConnection con1 = new SqlConnection(ConnectionString)) using (SqlConnection con2 = new SqlConnection(ConnectionString)) { con1.Open(); con2.Open(); } showSysTranStatus(); DependentTransaction dtx = Transaction.Current.DependentClone(DependentCloneOption.BlockCommitUntilComplete); Thread t1 = new Thread(o => workCallback(dtx)); Thread t2 = new Thread(o => workCallback(dtx)); t1.Start(); t2.Start(); t1.Join(); t2.Join(); ctx.Complete(); } trace("root transaction completes"); } } private static void workCallback(DependentTransaction dtx) { using(var txScope1 = new TransactionScope(dtx)) { using (SqlConnection con2 = new SqlConnection(ConnectionString)) { con2.Open(); trace("connection opened"); showDbTranStatus(con2); } txScope1.Complete(); } trace("dependant tran completes"); } private static void trace(string msg) { Console.WriteLine(Thread.CurrentThread.ManagedThreadId + " : " + msg); } private static void showSysTranStatus() { string msg; if (Transaction.Current != null) msg = Transaction.Current.TransactionInformation.DistributedIdentifier.ToString(); else msg = "no sys tran"; trace( msg ); } private static void showDbTranStatus(SqlConnection con) { var cmd = con.CreateCommand(); cmd.CommandText = "SELECT 1"; var c = cmd.ExecuteScalar(); trace("@@TRANCOUNT = " + c); } } It fails on Complete's call of root TransactionScope. But error is different: Unhandled Exception: System.Transactions.TransactionInDoubtException: The transaction is in doubt. --- pired. The timeout period elapsed prior to completion of the operation or the server is not responding. To sum up: I want to understand what "Transaction context in use by another session" means and how to reproduce it.

  Read the article

• Simple Detached pThread does not cancel! (cout blocks and interleaves even if mutexed)

  - by Gabriel

  I have a hard problem here, which I can not solve and do not find the right answer on the net: I have created a detached thread with a clean up routing, the problem is that on my Imac and Ubuntu 9.1 (Dual Core). I am not able to correctly cancel the detached thread in the fallowing code: #include <iostream> #include <pthread.h> #include <sched.h> #include <signal.h> #include <time.h> pthread_mutex_t mutex_t; using namespace std; static void cleanup(void *arg){ pthread_mutex_lock(&mutex_t); cout << " doing clean up"<<endl; pthread_mutex_unlock(&mutex_t); } static void *thread(void *aArgument) { pthread_setcancelstate(PTHREAD_CANCEL_ENABLE,NULL); pthread_setcanceltype(PTHREAD_CANCEL_DEFERRED,NULL); pthread_cleanup_push(&cleanup,NULL); int n=0; while(1){ pthread_testcancel(); sched_yield(); n++; pthread_mutex_lock(&mutex_t); cout << " Thread 2: "<< n<<endl; pthread_mutex_unlock(&mutex_t); } pthread_cleanup_pop(0); return NULL; } int main() { pthread_t thread_id; pthread_attr_t attr; pthread_attr_init(&attr); pthread_attr_setdetachstate(&attr,PTHREAD_CREATE_DETACHED); int error; if (pthread_mutex_init(&mutex_t,NULL) != 0) return 1; if (pthread_create(&thread_id, &attr, &(thread) , NULL) != 0) return 1; pthread_mutex_lock(&mutex_t); cout << "waiting 1s for thread...\n" <<endl; pthread_mutex_unlock(&mutex_t); int n =0; while(n<1E3){ pthread_testcancel(); sched_yield(); n++; pthread_mutex_lock(&mutex_t); cout << " Thread 1: "<< n<<endl; pthread_mutex_unlock(&mutex_t); } pthread_mutex_lock(&mutex_t); cout << "canceling thread...\n" <<endl; pthread_mutex_unlock(&mutex_t); if (pthread_cancel(thread_id) == 0) { //This doesn't wait for the thread to exit pthread_mutex_lock(&mutex_t); cout << "detaching thread...\n"<<endl; pthread_mutex_unlock(&mutex_t); pthread_detach(thread_id); while (pthread_kill(thread_id,0)==0) { sched_yield(); } pthread_mutex_lock(&mutex_t); cout << "thread is canceled"; pthread_mutex_unlock(&mutex_t); } pthread_mutex_lock(&mutex_t); cout << "exit"<<endl; pthread_mutex_unlock(&mutex_t); return 0; } When I replace the Cout with printf() i workes to the end "exit" , but with the cout (even locked) the executable hangs after outputting "detaching thread... It would be very cool to know from a Pro, what the problem here is?. Why does this not work even when cout is locked by a mutex!? Thanks a lot for your support!!

  Read the article

• How do I get my ActivityUnitTestCases to sync with the MessageQueue thread and call my Handler?

  - by Ricardo Gladwell

  I'm writing unit tests for a ListActivity in Android that uses a handler to update a ListAdapter. While my activity works in the Android emulator, running the same code in a unit test doesn't update my adapter: calls to sendEmptyMessage do not call handleMessage in my activity's Handler. How do I get my ActivityUnitTestCase to sync with the MessageQueue thread and call my Handler? The code for the Activity is somewhat like this: public class SampleActivity extends ListActivity implements SampleListener { List samples = new ArrayList(); public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.sample_list); listView.setEmptyView(findViewById(R.id.empty)); } private final Handler handler = new Handler() { @Override public void handleMessage(Message msg) { // unit test never reaches here sharesAdapter = new SampleAdapter(SampleActivity.this, samples); setListAdapter(sharesAdapter); } }; public void handleSampleUpdate(SampleEvent event) { samples.add(event.getSample()); handler.sendEmptyMessage(0); } } The code for my unit test is somewhat like this: public class SampleActivityTest extends ActivityUnitTestCase<SampleActivity> { public SampleActivityTest() { super(SampleActivity.class); } @MediumTest public void test() throws Exception { final SampleActivity activity = startActivity(new Intent(Intent.ACTION_MAIN), null, null); final ListView listView = (ListView) activity.findViewById(android.R.id.list); activity.handleSampleUpdate(new SampleEvent(this)); // unit test assert fails on this line: assertTrue(listView.getCount() == 1); } }

  Read the article

• JDBC ODBC.. (Exception in thread "AWT-EventQueue-0" java.lang.NullPointerException)

  - by enthudrives

  private void jButton3ActionPerformed(java.awt.event.ActionEvent evt) { PreparedStatement p1; String s="insert into reg values(?,?)"; try { p1 = conn.prepareStatement(s); System.out.println("hi?"); p1.setString(1, num.getText()); p1.setString(2, name.getText()); p1.executeUpdate(); // TODO add your handling code here: } catch (SQLException ex) { Logger.getLogger(sample.class.getName()).log(Level.SEVERE, null, ex); } } This is my insert module.. This works in my friend's laptop. But not in mine :( I get the following error: Exception in thread "AWT-EventQueue-0" java.lang.NullPointerException at sample.jButton1ActionPerformed(sample.java:197) at sample.access$200(sample.java:20) at sample$3.actionPerformed(sample.java:92) at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1995) at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2318) at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:387) at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:242) at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:236) at java.awt.Component.processMouseEvent(Component.java:6263) at javax.swing.JComponent.processMouseEvent(JComponent.java:3267) at java.awt.Component.processEvent(Component.java:6028) at java.awt.Container.processEvent(Container.java:2041) at java.awt.Component.dispatchEventImpl(Component.java:4630) at java.awt.Container.dispatchEventImpl(Container.java:2099) at java.awt.Component.dispatchEvent(Component.java:4460) at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4574) at java.awt.LightweightDispatcher.processMouseEvent(Container.java:4238) at java.awt.LightweightDispatcher.dispatchEvent(Container.java:4168) at java.awt.Container.dispatchEventImpl(Container.java:2085) at java.awt.Window.dispatchEventImpl(Window.java:2478) at java.awt.Component.dispatchEvent(Component.java:4460) at java.awt.EventQueue.dispatchEvent(EventQueue.java:599) at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269) at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184) at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174) at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169) at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161) at java.awt.EventDispatchThread.run(EventDispatchThread.java:122) Java Result: 1 PS: I am totally new to java. Is it a problem with my ODBC?

  Read the article

• Filling SWT table object using a separated thread class ...

  - by erlord

  Hi all I've got a code snippet by the swt team that does exactly what I need. However, there is a part I want to separate into another class, in particular, the whole inline stuff. In response to my former question, it has been suggested that Callable should be used in order to implement threaded objects. It is suggested to make use of an implementation of runnable or better callable, since I do need some kind of return. However, I don't get it. My problems are: In the original code, within the inline implementation of the method run, some of the parents objects are called. How would I do this when the thread is separated? Pass the object via the C'tor's parameter? In the original code, another runnable object is nested within the runnable implementation. What is it good for? How to implement this when having separated the code? Furthermore, this nested runnable again calls objects created by the main method. Please, have mercy with me, but I am still quite a beginner and my brain is near collapsing :-( All I want is to separate all the threaded stuff into another class and make the program do just the same thing as it already does. Help please! Again thank you very much in advance for any useful suggestions, hints, examples etc... Regs Me

  Read the article

• Could Python's logging SMTP Handler be freezing my thread for 2 minutes?

  - by Oddthinking

  A rather confusing sequence of events happened, according to my log-file, and I am about to put a lot of the blame on the Python logger, which is a bold claim. I thought I should get some second opinions about whether what I am saying could be true. I am trying to explain why there is are several large gaps in my log file (around two minutes at a time) during stressful periods for my application when it is missing deadlines. I am using Python's logging module on a remote server, and have set-up, with a configuration file, for all logs of severity of ERROR or higher to be emailed to me. Typically, only one error will be sent at a time, but during periods of sustained problems, I might get a dozen in a minute - annoying, but nothing that should stress SMTP. I believe that, after a short spurt of such messages, the Python logging system (or perhaps the SMTP system it is sitting on) is encountering errors or congestion. The call to Python's log is then BLOCKING for two minutes, causing my thread to miss its deadlines. (I was smart enough to move the logging until after the critical path of the application - so I don't care if logging takes me a few seconds, but two minutes is far too long.) This seems like a rather awkward architecture (for both a logging system that can freeze up, and for an SMTP system (Ubuntu, sendmail) that cannot handle dozens of emails in a minute**), so this surprises me, but it exactly fits the symptoms. Has anyone had any experience with this? Can anyone describe how to stop it from blocking? ** EDIT: I actually counted. A little under 4000 short emails in two hours. So far more than I suggested, sorry. But enough to over-fill a Sendmail's buffers?

  Read the article

< Previous Page | 84 85 86 87 88 89 90 91 92 93 94 95  | Next Page >