Search Results

Search found 19752 results on 791 pages for 'cpu window'.

Page 9/791 | < Previous Page | 5 6 7 8 9 10 11 12 13 14 15 16  | Next Page >

• Laptop CPU fan not working properly

  - by Smith

  My laptop's CPU fan is suddenly acting very bizarre, and I am at a loss for what to do so I am asking for some help. Specifically, the fan is not even starting to spin until the CPU reaches 60 degrees Celsius (checked through HWmonitor). Once it is on, however, it properly stays on even when the CPU gets back to idle temps around 38 Celsius. Before, the fan was simply starting with the computer and staying on like normal. I've checked this for consistency both by allowing cold boots to ramp up temperature to 60 Celsius (the slow climb also causing the laptop to become unreasonably warm near the heatsink), and also running Prime95 immediately to kickstart the fan (this works every time). The fan seems to be stationary when turning the computer on from either sleep or shutdown. The fan will start at POST very briefly, and then stop completely. I've checked the BIOS for a SmartFan setting but haven't found any. I've opened the case to check for dust or debris and have not found anything (I applied some canned air to the area just in case). The laptop is a Lenovo ThinkPad Edge E430 and the CPU is an Intel Core i5 3210m @ 2.5 GHz. Any advice would really be appreciated.

  Read the article

• Why does mpstat show different values when I use the interval setting?

  - by Abe

  Here's the output I get when I run mpstat: $mpstat Linux 3.2.0-30-generic (my-laptop-C650) 09/17/2012 _x86_64_ (2 CPU) 05:32:01 PM CPU %usr %nice %sys %iowait %irq %soft %steal %guest %idle 05:32:01 PM all 9.16 0.08 2.69 2.00 0.00 0.04 0.00 0.00 86.02 And here's what I get when I run it with a one-second interval: $mpstat 1 05:31:51 PM CPU %usr %nice %sys %iowait %irq %soft %steal %guest %idle 05:31:52 PM all 1.52 0.00 1.01 0.00 0.00 0.00 0.00 0.00 97.47 05:31:53 PM all 2.04 0.00 1.02 0.00 0.00 0.00 0.00 0.00 96.94 05:31:54 PM all 1.50 0.00 1.50 0.00 0.00 0.00 0.00 0.00 97.00 Why does the first process show the processor as 86% idle, and the second show it as ~97% idle? I've tried this in a bunch of different configurations, and it's not a real difference in CPU usage -- unless mpstat itself is making the difference. Which number should I trust?

  Read the article

• Windows 7 and laptop overheating

  - by Nikola

  I am using ArchLinux 99% of my working time, and laptop has absolutely no heating problems. But when it comes to using Windows 7, laptop starts heating and one can clearly hear CPU fan working like crazy. I think it has something to do with CPU itself, because on Linux I can simply manipulate with CPU governors (eg. set it to ondemand), but I can't seem to find any similar software to do the same thing as if in Linux. Or, the heating might be caused because of two graphics cards or something? CPU-Z results http://valid.canardpc.com/show_oc.php?id=2310815 Any idea/solution regarding this issue?

  Read the article

• How to prevent window list "confusion" when detaching eclipse views?

  - by amotzg

  I'm detaching eclipse views to float on my other screen in order to get more coding space on the first screen. When doing that, the detached windows appear in ubuntu's window list applet with the eclipse icon but with no title. Then, when pushing the main eclipse button on the window list, one of the detached views will get to front but not the main eclipse window. When using Alt+tab I can also see the extra eclipse icons but choosing the correct one for the main window works and make it the active window while also showing all detached childs. Other applications behave as expected, e.g. gimp floating panels don't show on the windows list and this is also the case with SlickEdit, Firefox child windows all show on window list but gets the focus correctly, etc. I can see the the workspace switcher show my two screens but in 'Monitor preferences' I see my two screens as one big screen. I'm working with ubuntu 10.04.4 under a VMware Workstation 7.1.3 build-324285. 'uname -a' output: Linux ubuntu 2.6.32-40-generic #87-Ubuntu SMP Tue Mar 6 00:56:56 UTC 2012 x86_64 GNU/Linux The desktop screen shot with the problem, ununtu's version, and Monitor preferences. How can I solve it and make only the main window show in window list or at least get activated when pushing it's button on the window list?

  Read the article

• What factors could cause the scalability issue on a 10-core CPU?

  - by JackWM

  I am tuning the performance of parallel Java programs. And want to check the impacts from the Architecture. I'm look into the Intel 10-core CPU, Intel(R) Xeon(R) CPU E7-L8867. I found my program only scales up to 5 cores. What could be the causes? I'm considering the Architecture effects. e.g. memory contention? More specifically, Are the 10 cores symmetric to each other? How many memory controllers does it have?

  Read the article

• Webalizer causing high CPU load

  - by Tom

  We use webalizer to generate reports on our Apache access logs - it is useful in conjunction with Google Analytics. The problem is that webalizer uses ALOT of CPU when running. If I run top I can see two perl processes with 90% CPU - this slows down the machine and therefore the website for our users. Webalizer is run via a daily cron job (/etc/cron.daily/00webalizer): #! /bin/bash # update access statistics for the web site if [ -s /var/log/httpd/access_log ]; then exec /usr/bin/webalizer -Q fi Does anyone know how to limit how much CPU webalizer can use? For example, would nice help and how would I use it?

  Read the article

• CPU Usage at 100% with "Hardware Interrupts"

  - by eventualEntropy

  After turning on my desktop one day, I found that my CPU usage was maxed out at 100%, with 99% of that going to hardware "Interrupts". I tried to enable/disable all my devices one by one through the device manager, and found that I could get the CPU usage used by the Interrupts down to 50% by disabling all devices labelled "USB Host Controller" (except the ones for the mouse/keyboard). I found that I also got 10-20% more from disabling "High Definition Audio Controller". Following the tutorial at: http://www.msfn.org/board/topic/140263-how-to-get-the-cause-of-high-cpu-usage-by-dpc-interrupt/ Led me to similar conclusions (that is, that the culprit is mostly "USB Host Controller"): I've tried updating my asus motherboard driver and my video card driver. This is on Windows 7 64 bit. I've spent hours trying to figure this out and I'm running out of ideas short of formatting (which might still not fix it!).

  Read the article

• How to monitor CPU usage and performance on a Hyper-V server with several VM's

  - by Bjørn

  Hello, I have a server that is running Windows 2008 64 bit Hyper-V, with 8 gigs of RAM and Intel Xeon X3440 @ 2.53 Ghz, which gives me 8 logical cores in the performance monitor on the host system. I have set up three Virtual Machines, all running Windows 2008 32 bit. Build server, running Team City Staging server SQL Server, running SQL Server 2005 I have some troubles with the setup in that the host monitor remains responsive at all times, even though the VM's are seemingly working at 100% cpu and are very sluggish and unresponsive. (I have asked a separate question about that.) So the question here is: What is the best way to monitor how the physical CPU's are actually utilized? The reason I am asking is that I am being told that i cannot reliably use the task manager to monitor CPU usage in a VM.

  Read the article

• CPU's on Hyper-V host system is just idling, even though VM's are at full throttle

  - by Bjørn

  Hello, I have a server that is running Windows 2008 64 bit Hyper-V, with 8 gigs of RAM and Intel Xeon X3440 @ 2.53 Ghz, which gives me 8 logical cores in the performance monitor on the host system. I have set up three Virtual Machines, all running Windows 2008 32 bit. Build server, running Team City Staging server SQL Server, running SQL Server 2005 These three machines are running very sluggishly, they are at 100% cpu even though the host system is barely using any cpu at all, typically below 10% total. Could anyone please give some tips as to the best setup for CPU allocating? Should I have set each server to have two cores, or should I increase this number above the total number of cores on the host? What is a good number to set on the Virtual Machine Reserve and Virtual Machine Limit? Is 8 gigs of physical RAM insufficient for 3 VM's? Thanks for reading. :)

  Read the article

• /lib/udev/net.agent causing high CPU usage

  - by Antoine Benkemoun

  We have a number of Soekris boxes running Debian Squeeze. They were installed through an automated process consisting of using deboostrap and copying it unto a Compact Flash card. We use puppet to manage the configuration of all these boxes. Before Debian Squeeze, they were running Voyage Linux which is just a "lighter" version of Debian. Since we have switched, we're seeing the /lib/udev/net.agent process take up an aweful lot of CPU. We have so far been unable to find any clue as to what this really does and why it's taking up some much CPU time. In htop we see the following : We are seeing absolutly no syslog messages related to this process so we're a bit lost... So, I am looking for pointers as to what this process does in general and what could be the potential cause of such CPU usage.

  Read the article

• Find which php scripts cause high CPU with php-cgi

  - by Oli

  Background: I maintain a server for a client who has half a dozen Wordpress sites on. They all have the W3 Total Cache plugin installed and eAcellerator is installed (might be APC). All the PHP sites run through a single batch of fastcgi php-cgi processes (it's actually php-fpm but I'm not sure if that makes a difference). Problem: php-cgi's CPU usage is quite high. Not terminally high but high enough to raise an eyebrow. The client wants to add more sites in the future and I want to avoid becoming CPU limited if I can help it. Question: Is there any way I can find the scripts or even just requests that are causing the high CPU. I realise I might not be able to do anything with the results but it would give me a chance.

  Read the article

• Generic socket 940 CPU fan interchangeable with HP part number 411454-001

  - by ConcernedOfTunbridgeWells

  Hi, I'm trying to find a generic CPU fan that will fit the air duct in an XW9300. Note that there are two CPU fan mounting schemes used on this machine. One with two grommets in the motherboard that the CPU fan screws into and one with a plastic collar and base plate. The form factor I'm looking for is the former (see picture below): Two HP part numbers for fans in this form factor are 411454-001 (shown below) and 416055-001. Note that the dimensions are important as the machine has an air duct that fits over the fan. Can anyone tell me the manufacturer and model of an equivalent generic part? Better yet, do you know somewhere (preferrably in the UK) that I can obtain such an item from?

  Read the article

• Generic socket 940 CPU fan for HP XW9300 interchangeable with HP part number 411454-001

  - by ConcernedOfTunbridgeWells

  Hi, I'm trying to find a generic Socket 940 CPU fan that will fit the air duct in an XW9300. Note that two different CPU fan mounting schemes have been used on this machine. One has two grommets in the motherboard that the CPU fan screws into and the other has a plastic collar and base plate. The form factor I'm looking for is the former (see the picture below). Two HP part numbers for fans in this form factor are 411454-001 (shown below) and 416055-001. Note that the dimensions are important as the machine has an air duct that fits over the fan. Can anyone tell me the manufacturer and model of an equivalent generic part? Better yet, do you know somewhere (preferrably in the UK) from which such an item can be obtained?

  Read the article

• Effects of enabling DVFS in a CPU

  - by Nrew

  I came up with this energy regulating software called Granola while reading at Ghacks.net I downloaded and installed the software but you need to enable the DVFS function in the CPU. I booted up and tried to enable DVFS in the CPU Configuration in my Asus motherboard(Desktop). But in the description it said that enabling the feature might raise some compatibility issues with the power supply. And I'm afraid that I might ruin the CPU if I do this. Any suggestions, any one here who has tried this before? I don't know who the manufacturer of my power supply is. Would you recommend some software that can determine every possible info about the power supply.

  Read the article

• Any way to disable specific CPU sleep modes?

  - by Philippe

  I just got a new Toshiba Tecra S11 notebook, which has a Core i5 520M CPU, and it appears to suffer from a well-known problem: a high pitched noise when the CPU is idle. Googling around revealed that this is caused by a specific power-saving mode in the CPU. In most cases, C4 mode is blamed for the noise. So my question is: is it possible to disable C4 mode (or any other "sleep" mode) using some utility or BIOS setting? I don't mind if it hurts battery life. I'd appreciate any advice on this matter. It's driving me crazy.

  Read the article

• PHP Script causing high CPU

  - by user20996

  I have a website which is causing me a major headache. There is one PHP script which is using far to much CPU, this only seem to happen when bots hit the site, I dont want to block all the bots because we need them. I have the the process manager output: Pid Owner Priority CPU % Memory % Command 16943 (Trace) (Kill) specialone 0 99.4 1.0 /usr/bin/php /var/www/specialone/page.php I ran strace -p 16943 on the process but it comes up with nothing. We have 2GB of RAM and the php memory_limit is set to 128M which should be enough. The trouble I have is the PHP code is a Framework and the culprit page.php pulls in a lot of other PHP files so I cant debug the PHP. Is there any way of finding out what the script is doing when its using so much CPU which will help me solve it?

  Read the article

• Very fast Laptop Heating due to very high CPU usage by dwm.exe

  - by Sushan Shrestha

  My laptop gets heated very fast and when I check the task manager, I find dwm.exe consuming very high CPU (mostly 100%). In the beginning I found the message "The graphic adapter has been stopped and recovered".Also I am getting one error message "Cidaemon.exe has stopped working" very frequently. During this period also, cpu usage is 100% which is consumed by dwm.exe. I have run ccleaner and Kingsoft PC doctor monitor to fix the register problem but the problem has not been solved. My display adaptor is : NVIDIA NVS 5200M. After the driver update, I am not getting "The graphic adapter has been stopped and recovered" but dwm.exe is still consuming 100% CPU one time in about 5 mins. Multiple restarts has not helped. Laptop Model: Dell Latitude E6430. Thanks in advance.

  Read the article

• Virtual MS Sql Server not consuming enough CPU

  - by rocketman

  We have a Win2008 server 32 bit running as a virtual machine under ESX server. It has 6 CPU cores of 2Gz each and 4GB ram. It's running MS Sql Server 2008 R2 only. Problem: The server is heavily loaded and responds slowly. From windows taskmanagers point of view, it really looks overloaded, CPU wise. However, our external "cloud manager" says it's only using 2.5GHz worth of CPU-cycles in the cluster. I/O times looks "good". We have already tried to set the SQL servers number of working threads from 0(auto) to 256, to no effect. How to tune the VM host, guest or SQL to use all of it's alotted resources? Does it sound possible att all?

  Read the article

• A definition for a CPU second?

  - by dude

  Hey, I'm totally behind this topic. Yesterday I was doing profiling for some script I'm working on, and the unit for time spent was a 'CPU second'. Can anyone remind me with the definition of it? For example for some profiling I got: 200.750 CPU seconds. What does that supposed to mean? At other case and for time consuming process I got: -347.977 CPU seconds, a negative number! Is there anyway I can convert that time, to calendar time? Cheers,

  Read the article

• Alternative to Rhythmbox that's light on CPU.

  - by D Connors

  I'm running Ubuntu Lucid on my netbook, and I like listening to music while doing other stuff. Problem is: Rhythmbox is constantly consuming 7-9% of my CPU while it's playing. Now, 9% might not seem like much, but it's more than double the sum of all other processes, and it's a battery killer. Now, I know that any music player will be active (not idle) while playing, and thus will consume more CPU power than idle processes. But I'd still like to know if there's a good music player for Ubuntu that's light on CPU.

  Read the article

• HIGH CPU USAGE FROM SUSTEM [on hold]

  - by user195641

  CAN ANYONE EXPLAIN THIS ? IT IS BAD FOR MY CPU ? CAN ANYONE HELP ME ? I DONT KNOW WHAT TO DO ! THERE IS HIGH DELAY WHEN I OPEN A NEW TASK HOWEVER ITS A INTEL CORE DUO EXTREAMA 3.0GH THANKS There are about 100 items monitored with the agent. They are also monitored on other identical hosts where Zabbix agent does not consume so much of CPU. Agents send collected data to Zabbix proxy. The agent configuration is default. The host CPU has 8 cores (2.4 Gz). The smallest time value for monitored items is 60 seconds.

  Read the article

• Cocoa/Objective-C - Child window with text input without main window becoming inactive

  - by Josh

  Hello All, I have a need to spawn a window that will hover just above my main window in a cocoa application. I want this main window to allow the user to enter some text in an input box. All is well until the text input box actually gains focus. The main window becomes "deactivated." This window is borderless and is a slightly custom shape -- its more like a hover card than anything else, I suppose. Basically, I'd like this thing to work almost exactly like Spotlight (Apple + Space) -- you can enter text, but this is such an an ancillary operation that in the context of the greater UX, you don't want the jarring effect of the main window graying out (becoming inactive). You'll notice when you have some application open and in-focus, spotlight will not cause the window of that application to become inactive. This problem arises because text input seems to REQUIRE that the child window become the key window (it will not let you place the cursor in the text input field). When it becomes key, the main window becomes inactive. So far I've tried: Subclassing NSWindow for my main application and overriding isKeyWindow such that it only loses key when the application is no longer the users focus (as opposed to the window). This had the unintended effect of colliding with key status of the child window and having very strange effects on the keyboard input (some keys are not captured, like delete) Creating a view instead of a window. Doesn't work because of this problem -- you cannot draw over a Webkit WebView these days. Anybody Cocoa/OSX wizards have any ideas? I've become a little obsessed with this one. An itch I can't scratch.

  Read the article

• Restricting Window Maximization Size

  - by sdasdadas

  I am currently running Conky to display some text on my background on the far right of the screen. The window is probably 200 pixels wide. Is it possible that when I maximize a window, there is some setting to prevent the window from completely maximizing? I have been manually adjusting the window size up until now. Eg. My resolution is 1024 x 800 but when I maximize any window it should only maximize up to 824 x 800... Thanks!

  Read the article

• Why is my CPU being used while doing nothing?

  - by Jop

  I have installed Ubuntu GNOME in BIOS mode on my MacBook (BIOS mode so that the proprietary NVIDIA drivers work. I need them for gaming.). For some reason, a lot of CPU is being used while not really doing anything. It swings between 20-30% on both cores, usually. But when I look at the list of processes and sort by CPU usage, I do not see anything special. No processes intensively doing anything. How can I fix this? EDIT: Output of top command. jop@jop-MacBook:~$ top top - 17:08:02 up 41 min, 2 users, load average: 0,51, 0,69, 0,95 Tasks: 202 total, 2 running, 200 sleeping, 0 stopped, 0 zombie %Cpu(s): 11,9 us, 5,8 sy, 0,0 ni, 80,3 id, 0,5 wa, 0,0 hi, 1,5 si, 0,0 st KiB Mem: 7908316 total, 2919940 used, 4988376 free, 153248 buffers KiB Swap: 3906244 total, 0 used, 3906244 free, 1326544 cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 3785 root 20 0 195m 82m 26m S 22,9 1,1 2:43.77 Xorg 4429 jop 20 0 1543m 150m 60m S 7,3 1,9 1:26.26 compiz 4198 jop 20 0 633m 21m 11m S 1,7 0,3 0:04.96 unity-panel-ser 7425 jop 20 0 564m 18m 12m S 1,7 0,2 0:00.84 gnome-terminal 7019 jop 20 0 806m 89m 46m S 1,0 1,2 0:10.01 chrome 7323 jop 20 0 966m 93m 23m S 1,0 1,2 0:06.85 chrome 6742 root 20 0 0 0 0 S 0,7 0,0 0:00.43 kworker/0:3 3 root 20 0 0 0 0 S 0,3 0,0 0:06.01 ksoftirqd/0 7008 root 20 0 0 0 0 S 0,3 0,0 0:00.27 kworker/1:3 7302 jop 20 0 972m 96m 28m S 0,3 1,2 0:06.32 chrome 7310 jop 20 0 382m 63m 39m S 0,3 0,8 0:00.34 chrome 7498 jop 20 0 24840 1600 1120 R 0,3 0,0 0:00.22 top 1 root 20 0 27176 2944 1412 S 0,0 0,0 0:01.58 init 2 root 20 0 0 0 0 S 0,0 0,0 0:00.00 kthreadd 5 root 0 -20 0 0 0 S 0,0 0,0 0:00.00 kworker/0:0H 6 root 20 0 0 0 0 S 0,0 0,0 0:00.00 kworker/u4:0 7 root rt 0 0 0 0 S 0,0 0,0 0:02.04 migration/0 Even when xorg isn't so busy like when I copied, CPU usage is higher then what the processes use.

  Read the article

• Apache taking up too much CPU

  - by andrewtweber

  I'm trying to manage a server on Amazon for a network of sites that receives about 100 million pageviews per month. Unfortunately, nobody out of my team of 5 developers has much server admin experience. Right now we have the MaxClients set to 1400. Currently our traffic is about average, and we have 1150 total Apache processes running, which use about 2% CPU each! Out of those 1150, 800 of them are currently sleeping, but still taking up CPU. I'm sure there are ways to optimize this. I have a few thoughts: It appears Apache is creating a new process for every single connection. Is this normal? Is there a way to more quickly kill the sleeping processes? Should we turn KeepAlive on? Each page loads about 15-20 medium-sized graphics and a lot of javascript/css. So, here's our Apache setup. We do plan on contracting a server admin asap, but I would really appreciate some advice until we can find someone. Timeout 25 KeepAlive Off MaxKeepAliveRequests 200 KeepAliveTimeout 5 <IfModule prefork.c> StartServers 100 MinSpareServers 20 MaxSpareServers 50 ServerLimit 1400 MaxClients 1400 MaxRequestsPerChild 5000 </IfModule> <IfModule worker.c> StartServers 4 MaxClients 400 MinSpareThreads 25 MaxSpareThreads 75 ThreadsPerChild 25 MaxRequestsPerChild 0 </IfModule> Full top output: top - 23:44:36 up 1 day, 6:43, 4 users, load average: 379.14, 379.17, 377.22 Tasks: 1153 total, 379 running, 774 sleeping, 0 stopped, 0 zombie Cpu(s): 71.9%us, 26.2%sy, 0.0%ni, 0.0%id, 0.0%wa, 0.0%hi, 1.9%si, 0.0%st Mem: 70343000k total, 23768448k used, 46574552k free, 527376k buffers Swap: 0k total, 0k used, 0k free, 10054596k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 1756 mysql 20 0 10.2g 1.8g 5256 S 19.8 2.7 904:41.13 mysqld 21515 apache 20 0 396m 18m 4512 R 2.1 0.0 0:34.42 httpd 21524 apache 20 0 396m 18m 4032 R 2.1 0.0 0:32.63 httpd 21544 apache 20 0 394m 16m 4084 R 2.1 0.0 0:36.38 httpd 21643 apache 20 0 396m 18m 4360 R 2.1 0.0 0:34.20 httpd 21817 apache 20 0 396m 17m 4064 R 2.1 0.0 0:38.22 httpd 22134 apache 20 0 395m 17m 4584 R 2.1 0.0 0:35.62 httpd 22211 apache 20 0 397m 18m 4104 R 2.1 0.0 0:29.91 httpd 22267 apache 20 0 396m 18m 4636 R 2.1 0.0 0:35.29 httpd 22334 apache 20 0 397m 18m 4096 R 2.1 0.0 0:34.86 httpd 22549 apache 20 0 395m 17m 4056 R 2.1 0.0 0:31.01 httpd 22612 apache 20 0 397m 19m 4152 R 2.1 0.0 0:34.34 httpd 22721 apache 20 0 396m 18m 4060 R 2.1 0.0 0:32.76 httpd 22932 apache 20 0 396m 17m 4020 R 2.1 0.0 0:37.34 httpd 22933 apache 20 0 396m 18m 4060 R 2.1 0.0 0:34.77 httpd 22949 apache 20 0 396m 18m 4060 R 2.1 0.0 0:34.61 httpd 22956 apache 20 0 402m 24m 4072 R 2.1 0.0 0:41.45 httpd

  Read the article

< Previous Page | 5 6 7 8 9 10 11 12 13 14 15 16  | Next Page >