Search Results

Search found 50594 results on 2024 pages for 'dynamic class loaders'.

Page 90/2024 | < Previous Page | 86 87 88 89 90 91 92 93 94 95 96 97  | Next Page >

  • C++ non-member functions for nested template classes

    - by beldaz
    I have been writing several class templates that contain nested iterator classes, for which an equality comparison is required. As I believe is fairly typical, the comparison is performed with a non-member (and non-friend) operator== function. In doing so, my compiler (I'm using Mingw32 GCC 4.4 with flags -O3 -g -Wall) fails to find the function and I have run out of possible reasons. In the rather large block of code below there are three classes: a Base class, a Composed class that holds a Base object, and a Nested class identical to the Composed class except that it is nested within an Outer class. Non-member operator== functions are supplied for each. These classes are in templated and untemplated forms (in their own respective namespaces), with the latter equivalent to the former specialised for unsigned integers. In main, two identical objects for each class are compared. For the untemplated case there is no problem, but for the templated case the compiler fails to find operator==. What's going on? #include <iostream> namespace templated { template<typename T> class Base { T t_; public: explicit Base(const T& t) : t_(t) {} bool equal(const Base& x) const { return x.t_==t_; } }; template<typename T> bool operator==(const Base<T> &x, const Base<T> &y) { return x.equal(y); } template<typename T> class Composed { typedef Base<T> Base_; Base_ base_; public: explicit Composed(const T& t) : base_(t) {} bool equal(const Composed& x) const {return x.base_==base_;} }; template<typename T> bool operator==(const Composed<T> &x, const Composed<T> &y) { return x.equal(y); } template<typename T> class Outer { public: class Nested { typedef Base<T> Base_; Base_ base_; public: explicit Nested(const T& t) : base_(t) {} bool equal(const Nested& x) const {return x.base_==base_;} }; }; template<typename T> bool operator==(const typename Outer<T>::Nested &x, const typename Outer<T>::Nested &y) { return x.equal(y); } } // namespace templated namespace untemplated { class Base { unsigned int t_; public: explicit Base(const unsigned int& t) : t_(t) {} bool equal(const Base& x) const { return x.t_==t_; } }; bool operator==(const Base &x, const Base &y) { return x.equal(y); } class Composed { typedef Base Base_; Base_ base_; public: explicit Composed(const unsigned int& t) : base_(t) {} bool equal(const Composed& x) const {return x.base_==base_;} }; bool operator==(const Composed &x, const Composed &y) { return x.equal(y); } class Outer { public: class Nested { typedef Base Base_; Base_ base_; public: explicit Nested(const unsigned int& t) : base_(t) {} bool equal(const Nested& x) const {return x.base_==base_;} }; }; bool operator==(const Outer::Nested &x, const Outer::Nested &y) { return x.equal(y); } } // namespace untemplated int main() { using std::cout; unsigned int testVal=3; { // No templates first typedef untemplated::Base Base_t; Base_t a(testVal); Base_t b(testVal); cout << "a=b=" << testVal << "\n"; cout << "a==b ? " << (a==b ? "TRUE" : "FALSE") << "\n"; typedef untemplated::Composed Composed_t; Composed_t c(testVal); Composed_t d(testVal); cout << "c=d=" << testVal << "\n"; cout << "c==d ? " << (c==d ? "TRUE" : "FALSE") << "\n"; typedef untemplated::Outer::Nested Nested_t; Nested_t e(testVal); Nested_t f(testVal); cout << "e=f=" << testVal << "\n"; cout << "e==f ? " << (e==f ? "TRUE" : "FALSE") << "\n"; } { // Now with templates typedef templated::Base<unsigned int> Base_t; Base_t a(testVal); Base_t b(testVal); cout << "a=b=" << testVal << "\n"; cout << "a==b ? " << (a==b ? "TRUE" : "FALSE") << "\n"; typedef templated::Composed<unsigned int> Composed_t; Composed_t c(testVal); Composed_t d(testVal); cout << "c=d=" << testVal << "\n"; cout << "d==c ? " << (c==d ? "TRUE" : "FALSE") << "\n"; typedef templated::Outer<unsigned int>::Nested Nested_t; Nested_t e(testVal); Nested_t f(testVal); cout << "e=f=" << testVal << "\n"; cout << "e==f ? " << (e==f ? "TRUE" : "FALSE") << "\n"; // Above line causes compiler error: // error: no match for 'operator==' in 'e == f' } cout << std::endl; return 0; }

    Read the article

  • PHP Classes Extend

    - by John
    I have two classes that work seperate from another, but they extend the same class. Is it possible to have them work the same instance of the extended class. I'm wanting the constructor of the extended class to run only once. I know this isn't right but something like this: <?php $oApp = new app; class a extends $oApp {} class b extends $oApp {}

    Read the article

  • Why can't you call abstract functions from abstract classes in PHP?

    - by incrediman
    I've set up an abstract parent class, and a concrete class which extends it. Why can the parent class not call the abstract function? //foo.php <?php abstract class AbstractFoo{ abstract public static function foo(); public static function getFoo(){ return self::foo();//line 5 } } class ConcreteFoo extends AbstractFoo{ public static function foo(){ return "bar"; } } echo ConcreteFoo::getFoo(); ?> Error: Fatal error: Cannot call abstract method AbstractFoo::foo() in foo.php on line 5

    Read the article

  • Auto-needed classes?

    - by fsdfa
    Suppose I have a class A and a class B. The .h of A, needs the .h of B, and the .h of B needs the .h of A. (need = #include). All .h have the guards: #ifndef _classX_ #define _classX_ ... ... #endif But if I compile the .cpp of A, then when it includes the .h of B, the B class cannot include the .h of A class because the A class has already use the guard. How can i solve this?

    Read the article

  • Firefox add-on development: Register global dynamic custom keyboard shortcuts

    - by dezwart
    I have been tasked with developing a Firefox add-on that is capable of registering global keyboard shortcuts (ones that will work throughout all areas of Firefox) that will open up the side-bar and execute an XMLRPC request based on previously recorded input. The idea here is that there will be many potential XMLRPC requests that the user will want to execute via a keyboard shortcut. Currently, the add-on is capable of handling pre-defined static keyboard shortcuts via the Firefox overlay. What I would like to achieve, is to allow the user to register their own dynamic custom keyboard shortcut. There is an add-on that currently has some of this functionality, called Keyconfig. I'm not keen on having to ask users to install a second add-on to define their own shortcuts. It also seems that using the dynamic keyboard shortcut registration method in Keyconfig would require the user to close all Firefox windows before the dynamic shortcut is made available. What I would like to know is: Is an XPCOM component the best way to register dynamic keyboard shortcuts from within a Firefox add-on? Is there a way to register the keyboard shortcut so that it is immediately available to all Firefox windows, without having to close the windows beforehand?

    Read the article

  • JQuery dynamic .load - works for 1 and not for the other??

    - by Alvin
    UPDATE: Site is online http://qwickqual.com/memorial/create/ under "Memoria Media" - Click on "Our Videos" and it loads the list of categories click on any sub category and it goes through the process below ---------------- end edit ---------------------------------- UPDATED DESCRIPTION OF ERROR: All code is based on <li> objects being linked If I click on an <li> from the Initial page load to load: section 1: I can click on an <li> to load sub-categories section 2: I then click on an <li>, the query is made server returns section 3, section is not loaded to screen / and callback function is skipped over perhaps someone has run into a similar issue before?? ---------------- end edit ---------------------------------- I've also added comments to the code I have a jquery function that is setup to load categorized lists of thumbnails. So far the function is in use in 3 location. Each of them generates HTML using the same template under django. The function works perfectly in 2 of the 3 locations, and I"m plain stumped as to why the 3rd won't work. Below is the complete set of relevant javascript, the page load HTML for the relevant section. And 2 examples of HTML that is loaded through the script, 1 of them works, 1 of them doesn't and both are loaded into the same page load HTML Any ideas what I'm missing here? Or information I need to add to help debug? Currently posting this to a live server to interact with, been local only till now... Error: Script works properly through all levels of title="our_photos" Script loads 1st level of title="our_videos" Script will not load sub-category of title="our_videos" Example: From HTML below: Click on Script will query the server properly: GET http://localhost%3A8000/memorial/media%5Ftype/our%5Fvideos/4/ Script will not load the returned HTML into the #select_media div scopeChain: [Call, Call multi=false uri=/memorial/media_type/our_videos/, Window # 0=Call 1=Call 2=window] relative vars: label = "our_videos" wrapper = "media" uri = "/memorial/media_type/our_videos/" multi = false Javascript <script type="text/javascript"> // this piece is where I'm having trouble in the grand scheme of things // label = piece of class tag // wrapper = tag to load everything inside of // uri = base of the page to load // multi = not relevant for this piece but needed to pass on to next function function img_thumb_loader(label, wrapper, uri, multi) { if(!(wrapper)) { wrapper = label } $('.'+label+'_category').click(function () { // show the loading animation $('div#'+wrapper+'_load').show(); // get var of current object type = $(this).attr('title') || ''; // load it into the screen - this is the error // when I click on an <li> from section 2 below it will query server // (Tamper data & server see it - & return section 3 below // But will not load into the screen on return // also skips over the callback function $('#select_'+label).load(uri+type+'/', '', function() { $('div#'+wrapper+'_load').hide(); $('input.img_'+label+'_field').each(function() { img = $(this).attr('value'); $('li#img_'+label+'-'+img).css('selected_thumb'); }); img_thumb_selected(label); window[label+'_loader'](); }); }); $('.img_'+label).click(function () { if($(this).hasClass('selected_thumb')) { $(this).removeClass('selected_thumb'); id = $(this).attr('title'); $('.img_'+label+'_selected[value="'+id+'"]').remove(); } else { if(!(multi)) { previous = $('.img_'+label+'_selected').val(); $('#img_'+label+'-'+previous).removeClass('selected_thumb'); $('.img_'+label+'_selected').remove(); } $(this).addClass('selected_thumb'); id = $(this).attr('title'); $('#select_'+wrapper).after('<input class="img_'+label+'_selected" id="img_'+label+'_field-'+id+'" type="hidden" name="imgs[]" value="'+id+'" />'); } }); img_thumb_selected(label); } function img_thumb_selected(label) { $('.img_'+label+'_selected').each(function() { current = $(this).val(); if(current) { $('#img_'+label+'-'+current).addClass('selected_thumb'); } }); } function media_type() { $('.media_type').click(function () { $('#media_load').show(); type = $(this).attr('title') || ''; $('#select_media').load('/memorial/media_type/'+type+'/', '', function() { $('#select_media').wrapInner('<div id="select_'+type+'"></div>'); $('#select_media').append('<ul class="root_link"><h3><a class="load_media" onclick="return false;" href="#">Return to Select Media Type</a></h3></ul>'); load_media_type(); $('#media_load').hide(); window[type+'_loader'](); }); }); } media_type(); function load_media_type() { $('.load_media').click(function () { $('#media_load').show(); $('#select_media').load('{% url mem_media_type %}', '', function() { $('#media_load').hide(); media_type(); }); }); } function our_photos_loader() { img_thumb_loader('our_photos', 'media', '{% url mem_our_photos %}', true); } function our_videos_loader() { img_thumb_loader('our_videos', 'media', '{% url mem_our_videos %}', false); } </script> HTML - Initial Page load <fieldset> <legend>Memorial Media</legend> <div style="display: none;" id="media_load" class="loading"/> <div id="select_media"> <ul style="width: 528px;" class="initial"> <li title="your_photos" class="media_type"><div class="photo_select_upload"><h3>Your Photos</h3></div></li> <li title="our_photos" class="media_type"><div class="photo_select"><h3>Our Photos</h3></div></li> <li title="our_videos" class="media_type"><div class="video_select"><h3>Our Videos</h3></div></li> </ul> </div> </fieldset> HTML - Returned from Click on section 1 this section can make calls to subcategories and it will work <br class="clear" /> <ul class="thumb_sub_category" style="width: 352px;"> <li id="our_photos_category-29" class="our_photos_category" title="29"> <div> <span style="background-image: url(/site_media/photologue/photos/cache/stuff_004_thumbnail.jpg);" class="thumb"><span></span></span> <p>Birds 1</p> </div> </li> <li id="our_photos_category-25" class="our_photos_category" title="25"> <div> <span style="background-image: url(/site_media/photologue/photos/cache/dsc_0035_thumbnail.jpg);" class="thumb"><span></span></span> <p>Dogs 1</p> </div> </li> </ul> HTML - Returned from click on Section 2 Having trouble with sub-categories from this area <br class="clear" /> <ul class="thumb_sub_category" style="width: 528px;"> <li id="our_videos_category-1" class="our_videos_category" title="1"> <div> <span style="background-image: url(/site_media/photologue/photos/cache/forest-1_thumbnail.jpg);" class="thumb"><span></span></span> <p>Video 1</p> </div> </li> <li id="our_videos_category-3" class="our_videos_category" title="3"> <div> <span style="background-image: url(/site_media/photologue/photos/cache/mountain-1_thumbnail.jpg);" class="thumb"><span></span></span> <p>Video 3</p> </div> </li> <li id="our_videos_category-4" class="our_videos_category" title="4"> <div> <span style="background-image: url(/site_media/photologue/photos/cache/mountain-3_thumbnail.jpg);" class="thumb"><span></span></span> <p>Video 4</p> </div> </li> </ul> HTML that fails to load inside - Section 3 <br class="clear" /> <ul class="thumb_sub_category" style="width: 528px;"> <li id="our_videos_category-1" class="our_videos_category" title="1"> <div> <span style="background-image: url(/site_media/photologue/photos/cache/forest-1_thumbnail.jpg);" class="thumb"><span></span></span> <p>Video 1</p> </div> </li> <li id="our_videos_category-3" class="our_videos_category" title="3"> <div> <span style="background-image: url(/site_media/photologue/photos/cache/mountain-1_thumbnail.jpg);" class="thumb"><span></span></span> <p>Video 3</p> </div> </li> <li id="our_videos_category-4" class="our_videos_category" title="4"> <div> <span style="background-image: url(/site_media/photologue/photos/cache/mountain-3_thumbnail.jpg);" class="thumb"><span></span></span> <p>Video 4</p> </div> </li> </ul>

    Read the article

  • ATI propriatery drivers install latest 12.8, broke my kernel. Stuck on kernel 3.2.0-26

    - by user66987
    I messed up a bit. Hoping some here can help me. I tried to install the newest catalyst 12.8. Sadly, this broke my system. I was stuck in low graphics mode. I finally managed to restore the proprietary drivers, and get into ubuntu again. But now I am stuck on kernel 3.2.0.26. I had installed kernel 3.2.0-30, but the system no longer sees it. I have kernel 3.2.0-29 too, but the system cannot see that as well. In the grub menu. When I use sudo update-grub, they are both listed. Here are the output I get: Searching for GRUB installation directory ... found: /boot/grub Cannot determine root device. Assuming /dev/hda1 This error is probably caused by an invalid /etc/fstab Searching for default file ... found: /boot/grub/default Testing for an existing GRUB menu.lst file ... found: /boot/grub/menu.lst Searching for splash image ... none found, skipping ... Found kernel: /boot/vmlinuz-3.2.0-30-generic Found kernel: /boot/vmlinuz-3.2.0-29-generic Found kernel: /boot/vmlinuz-3.2.0-27-generic Found kernel: /boot/vmlinuz-3.2.0-26-generic Found GRUB 2: /boot/grub/core.img Found kernel: /boot/memtest86+.bin Updating /boot/grub/menu.lst ... done I have searched everywhere to find a solution to my problem, but can't find any solutions. If you need any log outputs to figure out the problem, please let me know which ones. Update: here is the output for grub.cfg # # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then set have_grubenv=true load_env fi set default="0" if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi } function load_video { insmod vbe insmod vga insmod video_bochs insmod video_cirrus } insmod part_msdos insmod ext2 set root='(hd2,msdos1)' search --no-floppy --fs-uuid --set=root 270c7c58-06d8-4e6b-b9bb-8d92f46adc0b if loadfont /usr/share/grub/unicode.pf2 ; then set gfxmode=auto load_video insmod gfxterm insmod part_msdos insmod ext2 set root='(hd2,msdos1)' search --no-floppy --fs-uuid --set=root 270c7c58-06d8-4e6b-b9bb-8d92f46adc0b set locale_dir=($root)/boot/grub/locale set lang=nb_NO insmod gettext fi terminal_output gfxterm if [ "${recordfail}" = 1 ]; then set timeout=-1 else set timeout=10 fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/light-gray if background_color 44,0,30; then clear fi ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### function gfxmode { set gfxpayload="${1}" if [ "${1}" = "keep" ]; then set vt_handoff=vt.handoff=7 else set vt_handoff= fi } if [ "${recordfail}" != 1 ]; then if [ -e ${prefix}/gfxblacklist.txt ]; then if hwmatch ${prefix}/gfxblacklist.txt 3; then if [ ${match} = 0 ]; then set linux_gfx_mode=keep else set linux_gfx_mode=text fi else set linux_gfx_mode=text fi else set linux_gfx_mode=keep fi else set linux_gfx_mode=text fi export linux_gfx_mode if [ "${linux_gfx_mode}" != "text" ]; then load_video; fi menuentry 'Ubuntu, med Linux 3.2.0-26-generic' --class ubuntu --class gnu-linux --class gnu --class os { recordfail gfxmode $linux_gfx_mode insmod gzio insmod part_msdos insmod ext2 set root='(hd2,msdos1)' search --no-floppy --fs-uuid --set=root 270c7c58-06d8-4e6b-b9bb-8d92f46adc0b linux /boot/vmlinuz-3.2.0-26-generic root=UUID=270c7c58-06d8-4e6b-b9bb-8d92f46adc0b ro quiet splash $vt_handoff initrd /boot/initrd.img-3.2.0-26-generic } menuentry 'Ubuntu, med Linux 3.2.0-26-generic (gjenopprettelsesmodus)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod gzio insmod part_msdos insmod ext2 set root='(hd2,msdos1)' search --no-floppy --fs-uuid --set=root 270c7c58-06d8-4e6b-b9bb-8d92f46adc0b echo 'Laster Linux 3.2.0-26-generic ...' linux /boot/vmlinuz-3.2.0-26-generic root=UUID=270c7c58-06d8-4e6b-b9bb-8d92f46adc0b ro recovery nomodeset echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.2.0-26-generic } submenu "Previous Linux versions" { menuentry 'Ubuntu, med Linux 3.2.0-25-generic' --class ubuntu --class gnu-linux --class gnu --class os { recordfail gfxmode $linux_gfx_mode insmod gzio insmod part_msdos insmod ext2 set root='(hd2,msdos1)' search --no-floppy --fs-uuid --set=root 270c7c58-06d8-4e6b-b9bb-8d92f46adc0b linux /boot/vmlinuz-3.2.0-25-generic root=UUID=270c7c58-06d8-4e6b-b9bb-8d92f46adc0b ro quiet splash $vt_handoff initrd /boot/initrd.img-3.2.0-25-generic } menuentry 'Ubuntu, med Linux 3.2.0-25-generic (gjenopprettelsesmodus)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod gzio insmod part_msdos insmod ext2 set root='(hd2,msdos1)' search --no-floppy --fs-uuid --set=root 270c7c58-06d8-4e6b-b9bb-8d92f46adc0b echo 'Laster Linux 3.2.0-25-generic ...' linux /boot/vmlinuz-3.2.0-25-generic root=UUID=270c7c58-06d8-4e6b-b9bb-8d92f46adc0b ro recovery nomodeset echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.2.0-25-generic } menuentry 'Ubuntu, med Linux 3.2.0-24-generic' --class ubuntu --class gnu-linux --class gnu --class os { recordfail gfxmode $linux_gfx_mode insmod gzio insmod part_msdos insmod ext2 set root='(hd2,msdos1)' search --no-floppy --fs-uuid --set=root 270c7c58-06d8-4e6b-b9bb-8d92f46adc0b linux /boot/vmlinuz-3.2.0-24-generic root=UUID=270c7c58-06d8-4e6b-b9bb-8d92f46adc0b ro quiet splash $vt_handoff initrd /boot/initrd.img-3.2.0-24-generic } menuentry 'Ubuntu, med Linux 3.2.0-24-generic (gjenopprettelsesmodus)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod gzio insmod part_msdos insmod ext2 set root='(hd2,msdos1)' search --no-floppy --fs-uuid --set=root 270c7c58-06d8-4e6b-b9bb-8d92f46adc0b echo 'Laster Linux 3.2.0-24-generic ...' linux /boot/vmlinuz-3.2.0-24-generic root=UUID=270c7c58-06d8-4e6b-b9bb-8d92f46adc0b ro recovery nomodeset echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.2.0-24-generic } menuentry 'Ubuntu, med Linux 3.2.0-23-generic' --class ubuntu --class gnu-linux --class gnu --class os { recordfail gfxmode $linux_gfx_mode insmod gzio insmod part_msdos insmod ext2 set root='(hd2,msdos1)' search --no-floppy --fs-uuid --set=root 270c7c58-06d8-4e6b-b9bb-8d92f46adc0b linux /boot/vmlinuz-3.2.0-23-generic root=UUID=270c7c58-06d8-4e6b-b9bb-8d92f46adc0b ro quiet splash $vt_handoff initrd /boot/initrd.img-3.2.0-23-generic } menuentry 'Ubuntu, med Linux 3.2.0-23-generic (gjenopprettelsesmodus)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod gzio insmod part_msdos insmod ext2 set root='(hd2,msdos1)' search --no-floppy --fs-uuid --set=root 270c7c58-06d8-4e6b-b9bb-8d92f46adc0b echo 'Laster Linux 3.2.0-23-generic ...' linux /boot/vmlinuz-3.2.0-23-generic root=UUID=270c7c58-06d8-4e6b-b9bb-8d92f46adc0b ro recovery nomodeset echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.2.0-23-generic } } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry "Memory test (memtest86+)" { insmod part_msdos insmod ext2 set root='(hd2,msdos1)' search --no-floppy --fs-uuid --set=root 270c7c58-06d8-4e6b-b9bb-8d92f46adc0b linux16 /boot/memtest86+.bin } menuentry "Memory test (memtest86+, serial console 115200)" { insmod part_msdos insmod ext2 set root='(hd2,msdos1)' search --no-floppy --fs-uuid --set=root 270c7c58-06d8-4e6b-b9bb-8d92f46adc0b linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### menuentry "Windows 7 (loader) (on /dev/sdb1)" --class windows --class os { insmod part_msdos insmod ntfs set root='(hd1,msdos1)' search --no-floppy --fs-uuid --set=root 448AF3CE8AF3BA8E chainloader +1 } ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ### How can I set kernel 3.2.0.30 as the default kernel? According to this file, kernel 3.2.0-30 does not exist.

    Read the article

  • PHP Startup: Unable to load dynamic library '/usr/lib64/php/modules/json.so' undefined symbol: ZVAL_DELREF

    - by crmpicco
    I have an issue where I am unable to use JSON, which would appear to be because of the following error. There is another thread on this forum this touches on a similar issue, but it's not quite the same. I am using CentOS 5.6 and have the following pear packages installed: [crmpicco@eq-www-php53 ~]$ pear list PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib64/php/modules/json.so' - /usr/lib64/php/modules/json.so: undefined symbol: ZVAL_DELREF in Unknown on line 0 Installed packages, channel pear.php.net: ========================================= Package Version State Archive_Tar 1.3.7 stable Auth_SASL 1.0.2 stable Console_Getopt 1.3.1 stable Image_Barcode 1.1.2 stable Mail 1.1.14 stable Net_SMTP 1.2.10 stable Net_Socket 1.0.8 stable PEAR 1.9.4 stable Structures_Graph 1.0.4 stable XML_RPC 1.5.4 stable XML_Util 1.2.1 stable json 1.2.1 stable and have the following PHP packages installed: [crmpicco@eq-www-php53 ~]$ yum list installed | grep php php.x86_64 5.3.10-1.w5 installed php-cli.x86_64 5.3.10-1.w5 installed php-common.x86_64 5.3.10-1.w5 installed php-devel.x86_64 5.3.10-1.w5 installed php-gd.x86_64 5.3.10-1.w5 installed php-ldap.x86_64 5.3.10-1.w5 installed php-mcrypt.x86_64 5.3.10-1.w5 installed php-mysql.x86_64 5.3.10-1.w5 installed php-pdo.x86_64 5.3.10-1.w5 installed php-pear.noarch 1:1.9.4-1.w5 installed php-pear-Net-Socket.noarch 1.0.8-1.el5.centos installed php-soap.x86_64 5.3.10-1.w5 installed php-xml.x86_64 5.3.10-1.w5 installed The error: [crmpicco@eq-www-php53 ~]$ php -v PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib64/php/modules/json.so' - /usr/lib64/php/modules/json.so: undefined symbol: ZVAL_DELREF in Unknown on line 0 PHP 5.3.10 (cli) (built: Feb 2 2012 23:23:12) Copyright (c) 1997-2012 The PHP Group Zend Engine v2.3.0, Copyright (c) 1998-2012 Zend Technologies My repolist reads as: [crmpicco@eq-www-php53 ~]$ yum repolist Loaded plugins: changelog, fastestmirror Excluding Packages in global exclude list Finished repo id repo name status base CentOS-5 - Base 3,548+43 epel Extra Packages for Enterprise Linux 5 - x86_64 6,815+156 extras CentOS-5 - Extras 245+23 rpmforge Red Hat Enterprise 5 - RPMforge.net - dag 11,016+67 updates CentOS-5 - Updates 233 webtatic Webtatic Repository 5 - x86_64 211+183 repolist: 22,068 I am getting HTTP 500 errors everywhere that I use JSON so my application is non functional right now.

    Read the article

  • Using dd-wrt Dynamic DNS client with CloudFlare

    - by Roman
    I'm trying to configure Dynamic DNS client on my router with dd-wrt (v24-sp2) firmware so it would dynamically change IP address in one of the DNS records. Unfortunately I encountered a problem… Here is an example request from their ddclient configuration: https://www.cloudflare.com/api.html?a=DIUP&u=<my_login>&tkn=<my_token>&ip=<my_ip>&hosts=<my_record> It works if I use it in browser, but in dd-wrt I get this output: Tue Jan 24 00:36:47 2012: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Tue Jan 24 00:36:47 2012: I:INADYN: IP address for alias '<my_record>' needs update to '<my_ip>' Tue Jan 24 00:36:48 2012: W:INADYN: Error validating DYNDNS svr answer. Check usr,pass,hostname! (HTTP/1.1 303 See Other Server: cloudflare-nginx Date: Mon, 23 Jan 2012 14:36:48 GMT Content-Type: text/plain Connection: close Expires: Sun, 25 Jan 1981 05:00:00 GMT Cache-Control: no-store, no-cache, must-revalidate, post-check=0, pre-check=0 Pragma: no-cache Location: https://www.cloudflare.com/api.html?a=DIUP&u=<my_login>&tkn=<my_token>&ip=<my_ip>&hosts=<my_record> Vary: Accept-Encoding Set-Cookie: __cfduid=<id>; expires=Mon, 23-Dec-2019 23:50:00 GMT; path=/; domain=.cloudflare.com Set-Cookie: __cfduid=<id>; expires=Mon, 23-Dec-2019 23:50:00 GMT; path=/; domain=.www.cloudflare.com You must include an `a' paramiter, with a value of DIUP|wl|chl|nul|ban|comm_news|devmode|sec_lvl|ipv46|ob|cache_lvl|fpurge_ts|async|pre_purge|minify|stats|direct|zone_check|zone_ips|zone_errors|zone_agg|zone_search|zone_time|zone_grab|app|rec_se URL from "Location" works perfectly and parameter "a" is included. What's the problem?

    Read the article

  • Setup Reverse DNS with Cpanel and WHM?

    - by m3d
    I needed to set-up a reverse DNS via cpanel. I followed the steps in this tutorial but it didn't work: http://docs.cpanel.net/twiki/bin/view/11_30/WHMDocs/RdnsForBind. I use my own name servers registered with go-daddy. But I am with VPS hosting company. I did use a new serial number and exactly as the tutorial however didnt seems to be working When I check this via windows nslookup {ip-address} I still get the my hosting company name, when reversed.

    Read the article

  • DNS servers not set properly? Site failing to load by hostname, though loads fine by IP

    - by Crashalot
    We run www.tekiki.com. Some users, including us, cannot reach www.tekiki.com because of DNS issues. The site resolves fine on the desktop, but it fails from our iPhones and iPads. This doesn't happen to everyone. We noticed the problem yesterday, then set our DNS servers to Cloudflare's DNS servers, hoping that would fix things. Accessing the site by IP addr loads the site fine. Two questions: 1) Does anyone know what the solution is? 2) Should we use other DNS servers besides Cloudflare?

    Read the article

  • Back from Teched US

    - by gsusx
    It's been a few weeks since I last blogged and, trust me, I am not happy about it :( I have been crazily busy with some of our projects at Tellago which you are going to hear more about in the upcoming weeks :) I was so busy that I didn't even have time to blog about my sessions at Teched US last week. This year I ended up presenting three sessions on three different tracks: BIE403 | Real-Time Business Intelligence with Microsoft SQL Server 2008 R2 Session Type: Breakout Session Real-time business...(read more)

    Read the article

  • Tellago & Tellago Studios at Microsoft TechReady

    - by gsusx
    This week Microsoft is hosting the first edition of their annual TechReady conference. Even though TechReady is an internal conference, Microsoft invited us to present a not one but two sessions about some our recent work. We are particularly proud of the fact that one of those sessions is about our SO-Aware service registry. We see this as a recognition to the growing popularity of SO-Aware as the best Agile SOA governance solution in the Microsoft platform. Well, on Tuesday I had the opportunity...(read more)

    Read the article

  • Creating PDF documents dynamically using Umbraco and XSL-FO part 2

    - by Vizioz Limited
    Since my last post I have made a few modifications to the PDF generation, the main one being that the files are now dynamically renamed so that they reflect the name of the case study instead of all being called PDF.PDF which was not a very helpful filename, I just wanted to get something live last week, so decided that something was better than nothing :)The issue with the filenames comes down to the way that the PDF's are being generated by using an alternative template in Umbraco, this means that all you need to do is add " /pdf " to the end of a case study URL and it will create a PDF version of the case study. The down side is that your browser will merrily download the file and save it as PDF.PDF because that is the name of the last part of the URL.What you need to do is set the content-disposition header to be equal to the name you would like the file use, Darren Ferguson mentioned this on the Change the name of the PDF forum post.We have used the same technique for downloading dynamically generated excel files, so I thought it would be useful to create a small macro to set both this header and also to set the caching headers to prevent any caching issues, I think in the past we have experienced all possible issues, including various issues where IE behaves differently to other browsers when you are using SSL and so the below code should work in all situations!The template for the PDF alternative template is very simple:<%@ Master Language="C#" MasterPageFile="~/umbraco/masterpages/default.master" AutoEventWireup="true" %><asp:Content ID="Content1" ContentPlaceHolderID="ContentPlaceHolderDefault" runat="server"> <umbraco:Macro Alias="PDFHeaders" runat="server"></umbraco:Macro> <umbraco:Macro xsl="FO-CaseStudy.xslt" Alias="PDFXSLFO" runat="server"></umbraco:Macro></asp:Content>The following code snippet is the XSLT macro that simply creates our file name and then passes the file name into the helper function:<xsl:template match="/"> <xsl:variable name="fileName"> <xsl:text>Vizioz_</xsl:text> <xsl:value-of select="$currentPage/@nodeName" /> <xsl:text>_case_study.pdf</xsl:text> </xsl:variable> <xsl:value-of select="Vizioz.Helper:AddDocumentDownloadHeaders('application/pdf', $fileName)"/> </xsl:template>And the following code is the helper function that clears the current response and adds all the appropriate headers:public static void AddDocumentDownloadHeaders(string contentType, string fileName){ HttpResponse response = HttpContext.Current.Response; HttpRequest request = HttpContext.Current.Request; response.Clear(); response.ClearHeaders(); if (request.IsSecureConnection & request.Browser.Browser == "IE") { // Don't use the caching headers if the browser is IE and it's a secure connection // see: http://support.microsoft.com/kb/323308 } else { // force not using the cache response.AppendHeader("Cache-Control", "no-cache"); response.AppendHeader("Cache-Control", "private"); response.AppendHeader("Cache-Control", "no-store"); response.AppendHeader("Cache-Control", "must-revalidate"); response.AppendHeader("Cache-Control", "max-stale=0"); response.AppendHeader("Cache-Control", "post-check=0"); response.AppendHeader("Cache-Control", "pre-check=0"); response.AppendHeader("Pragma", "no-cache"); response.Cache.SetCacheability(HttpCacheability.NoCache); response.Cache.SetNoStore(); response.Cache.SetExpires(DateTime.UtcNow.AddMinutes(-1)); } response.AppendHeader("Expires", DateTime.Now.AddMinutes(-1).ToLongDateString()); response.AppendHeader("Keep-Alive", "timeout=3, max=993"); response.AddHeader("content-disposition", "attachment; filename=\"" + fileName + "\""); response.ContentType = contentType;}I will write another blog soon with some more details about XSL-FO and how to create the PDF's dynamically.Please do re-tweet if you find this interest :)

    Read the article

  • PDF from Umbraco | Creating PDF case studies from data in the Umbraco CMS

    - by Vizioz Limited
    Last week we launched the first version of our website based on Umbraco 4.5.2 and this week we have just added a bit of extra functionality to the case studies section which enables you to download the case studies as PDF documents.To do this we used the PDF Creator package by Darren Ferguson, this is actually a wrapper around a product from a company called Ibex, which is where you can download documentation for the mark up required.The way Darren has made the implementation is really simple for anyone already familiar with the Umbraco CMS. You simple create a new template and call a Usercontrol macro, this then does the magic in the background and passes an XSLT file to the ibex engine.What you need to be aware of is that you need to learn a new mark up language called XSL-FO this is actually part of the XSL 1.0 specification and is a language used to express print layouts.As an indication of timescale, from knowing nothing about XSL-FO to the finished product that you can see on the website now has taken me 2 days of learning and just fiddling with the mark up to get the final result.If anyone is interested I might post some code snippets to show you how some of it is done, I would also be really interested to have some feedback about the PDF layout and what you like and don't like about it.Cheers,ChrisPosted using BlogPress from my iPad

    Read the article

  • Tellago && Tellago Studios 2010

    - by gsusx
    With 2011 around the corner we, at Tellago and Tellago Studios , we have been spending a lot of times evaluating our successes and failures (yes those too ;)) of 2010 and delineating some of our goals and strategies for 2011. When I look at 2010 here are some of the things that quickly jump off the page: Growing Tellago by 300% Launching a brand new company: Tellago Studios Expanding our customer base Establishing our business intelligence practice http://tellago.com/what-we-say/events/business-intelligence...(read more)

    Read the article

  • DonXml does WCF in NYC

    - by gsusx
    Tomorrow is WCF day in New York city!!!!! My good friend and Tellago's CTO Don Demsak will be doing a session WCF Data and RIA Services at the WCF fire-starter event to be hosted at the Microsoft offices in New York city. Don has a encyclopedic knowledge of both technologies and will be sharing lots of best practices learned from applying these technologies in large service oriented environments. In addition to Don, my crazy Cuban friend Miguel Castro will also be presenting three sessions at the...(read more)

    Read the article

  • Two domains, two servers, one dynamic IP address

    - by giantman
    I have two domains hi.org and bye.net and one dynamic IP address and two servers. I want to attach one domain bye.net to server1 and hi.org to server2. I'm using Apache wamp 2.0i. I have two servers behind one router with a dynamic IP address #httpd.conf file additions <IfModule mod_proxy.c> ProxyRequests Off <Proxy *> Order deny,allow Allow from all </Proxy> </IfModule> #vhost file additions NameVirtualHost *:80 #default <VirtualHost *:80> DocumentRoot "c:/wamp/www/fallback" </VirtualHost> # Server 1 <VirtualHost *:80> DocumentRoot "c:/wamp/www" ServerName h**p://bye.net ServerAlias bye.net </VirtualHost> # Server 2 <VirtualHost *:80> ProxyPreserveHost On ProxyPass / h**p://192.168.1.119/ DocumentRoot "g:/wamp/www" ServerName h**p://hi.org ServerAlias hi.org </VirtualHost> After doing all this I fallback to server1 only I don't get the page hi.org I only get the page bye.net, I don't even get the default fallback page which gets executed when a person enters IP address but not the domain name. I use Windows 7 (server 2) and Windows XP (server 1) UPDATE: I needed to remove DocumentRoot "g:/wamp/www" line :D it was there by mistake! things are working fine now. But one thing: the URL gets replaced by the local ip address any way to not make that happen?

    Read the article

  • C# 4.0 in a Nutshell, Fourth Edition

    - by outcoldman
    Just became a lucky owner of this book C# IN A NUTSHELL 4th edition. This is a fourth edition of this book’s series. I saw previous third edition of this book, we presented it on one of our events at Yaroslavl State University, but that book was a Russian translated version and published in Russia, this is was bad side of that book – all books at Russia printed on really bad paper. I should say that I didn’t read this book by end, but already I was surprised. Why? Why I heard a lot about Richter CLR via C# (English version of 3rd edition of this book I already have, and this book are waiting my attention), and just a few words about C# IN A NUTSHELL, at least in my sphere. I just listen once about this book at one of the podcast of Alt.Net group, and this words was Richter it is really good book, and C# IN A NUTSHELL it is a good handbook. My opinion is - you should read Richter if you want to develop with .NET. But if you want to develop on .NET with C# you should read C# IN A NUTSHELL too. Read more...

    Read the article

  • SQL Server 2012 : Changes to system objects in RC0

    - by AaronBertrand
    As with every new major milestone, one of the first things I do is check out what has changed under the covers. Since RC0 was released yesterday, I've been poking around at some of the DMV and other system changes. Here is what I have noticed: New objects in RC0 that weren't in CTP3 Quick summary: We see a bunch of new aggregates for use with geography and geometry. I've stayed away from that area of programming so I'm not going to dig into them. There is a new extended procedure called sp_showmemo_xml....(read more)

    Read the article

  • Tellago Devlabs: A RESTful API for BizTalk Server Business Rules

    - by gsusx
    Tellago DevLabs keeps growing as the primary example of our commitment to open source! Today, we are very happy to announce the availability of the BizTalk Business Rules Data Service API which extends our existing BizTalk Data Services solution with an OData API for the BizTalk Server Business Rules engine. Tellago’s Vishal Mody led the implementation of this version of the API with some input from other members of our technical staff. The motivation The fundamental motivation behind the BRE Data...(read more)

    Read the article

  • Dynamic virtual host configuration in Apache

    - by Kostas Andrianopoulos
    I want to make a virtual host in Apache with dynamic configuration for my websites. For example something like this would be perfect. <VirtualHost *:80> AssignUserId $domain webspaces ServerName $subdomain.$domain.$tld ServerAdmin admin@$domain.$tld DocumentRoot "/home/webspaces/$domain.$tld/subdomains/$subdomain" <Directory "/home/webspaces/$domain.$tld/subdomains/$subdomain"> .... </Directory> php_admin_value open_basedir "/tmp/:/usr/share/pear/:/home/webspaces/$domain.$tld/subdomains/$subdomain" </VirtualHost> $subdomain, $domain, $tld would be extracted from the HTTP_HOST variable using regex at request time. No more loads of configuration, no more apache reloading every x minutes, no more stupid logic. Notice that I use mpm-itk (AssignUserId directive) so each virtual host runs as a different user. I do not intend to change this part. Since now I have tried: - mod_vhost_alias but this allows dynamic configuration of only the document root. - mod_macro but this still requires the arguments of the vhost to be declared explicitly for each vhost. - I have read about mod_vhs and other modules which store configuration in a SQL or LDAP server which is not acceptable as there is no need for configuration! Those 3 necessary arguments can be generated at runtime. - I have seen some Perl suggestions like this, but as the author states $s->add_config would add a directive after every request, thus leading to a memory leak, and $r->add_config seems not to be a feasible solution.

    Read the article

  • Learning to implement dynamically typed language compiler

    - by TriArc
    I'm interested in learning how to create a compiler for a dynamically typed language. Most compiler books, college courses and articles/tutorials I've come across are specifically for statically typed languages. I've thought of a few ways to do it, but I'd like to know how it's usually done. I know type inferencing is a pretty common strategy, but what about others? Where can I find out more about how to create a dynamically typed language? Edit 1: I meant dynamically typed. Sorry about the confusion. I've written toy compilers for statically typed languages and written some interpreters for dynamically typed languages. Now, I'm interested in learning more about creating compilers for a dynamically typed language. I'm specifically experimenting with LLVM and since I need to specify the type of every method and argument, I'm thinking of ways to implement a dynamically typed language on something like LLVM.

    Read the article

  • How do I classify using GLCM and SVM Classifier in Matlab?

    - by Gomathi
    I'm on a project of liver tumor segmentation and classification. I used Region Growing and FCM for liver and tumor segmentation respectively. Then, I used Gray Level Co-occurence matrix for texture feature extraction. I have to use Support Vector Machine for Classification. But I don't know how to normalize the feature vectors. Can anyone tell how to program it in Matlab? To the GLCM program, I gave the tumor segmented image as input. Was I correct? If so, I think, then, my output will also be correct. My glcm coding, as far as I have tried is, I = imread('fzliver3.jpg'); GLCM = graycomatrix(I,'Offset',[2 0;0 2]); stats = graycoprops(GLCM,'all') t1= struct2array(stats) I2 = imread('fzliver4.jpg'); GLCM2 = graycomatrix(I2,'Offset',[2 0;0 2]); stats2 = graycoprops(GLCM2,'all') t2= struct2array(stats2) I3 = imread('fzliver5.jpg'); GLCM3 = graycomatrix(I3,'Offset',[2 0;0 2]); stats3 = graycoprops(GLCM3,'all') t3= struct2array(stats3) t=[t1;t2;t3] xmin = min(t); xmax = max(t); scale = xmax-xmin; tf=(x-xmin)/scale Was this a correct implementation? Also, I get an error at the last line. My output is: stats = Contrast: [0.0510 0.0503] Correlation: [0.9513 0.9519] Energy: [0.8988 0.8988] Homogeneity: [0.9930 0.9935] t1 = Columns 1 through 6 0.0510 0.0503 0.9513 0.9519 0.8988 0.8988 Columns 7 through 8 0.9930 0.9935 stats2 = Contrast: [0.0345 0.0339] Correlation: [0.8223 0.8255] Energy: [0.9616 0.9617] Homogeneity: [0.9957 0.9957] t2 = Columns 1 through 6 0.0345 0.0339 0.8223 0.8255 0.9616 0.9617 Columns 7 through 8 0.9957 0.9957 stats3 = Contrast: [0.0230 0.0246] Correlation: [0.7450 0.7270] Energy: [0.9815 0.9813] Homogeneity: [0.9971 0.9970] t3 = Columns 1 through 6 0.0230 0.0246 0.7450 0.7270 0.9815 0.9813 Columns 7 through 8 0.9971 0.9970 t = Columns 1 through 6 0.0510 0.0503 0.9513 0.9519 0.8988 0.8988 0.0345 0.0339 0.8223 0.8255 0.9616 0.9617 0.0230 0.0246 0.7450 0.7270 0.9815 0.9813 Columns 7 through 8 0.9930 0.9935 0.9957 0.9957 0.9971 0.9970 ??? Error using ==> minus Matrix dimensions must agree. The images are:

    Read the article

  • "initialization error: class file has wrong version" message in JDeveloper 10.1.2.x

    - by [email protected]
    The "initialization error: class file has wrong version" has become a somewhat recurrent error message thrown by JDeveloper 10.1.2.x as newer JDKs have been released in the last years. Note that JDeveloper 10.1.2 was developed to run with JDK 1.4.2. The reasons for this error message to be thrown include: A JDK version higher than 1.4.2 is being used and some unexpected incompatibility conflicts can occur because of that Some of the libraries used on the workspace and/or project were compiled with newer JDK version So, it is strongly recommended to use newer JDeveloper versions (10.1.3 - 11g) for newer JDKs. JDeveloper 10.1.2 will be desupported in December 2010 (or later depending on the support contract). Further information about this can be seen at http://www.oracle.com/support/library/brochure/lifetime-support-middleware.pdf

    Read the article

< Previous Page | 86 87 88 89 90 91 92 93 94 95 96 97  | Next Page >