Search Results

Search found 10215 results on 409 pages for 'ram usage'.

Page 90/409 | < Previous Page | 86 87 88 89 90 91 92 93 94 95 96 97  | Next Page >

• How do i change the BIOS boot splash screen?

  - by YumYumYum

  I have a Dell PC which has very ugly and bad luck looking Alien face on every boot. I want to change it or disable it forever, but in Bios they do not have any options. How can i change this from my linux Fedora or ArchLinux which is running now? Tried following does not work. ( http://www.pixelbeat.org/docs/bios/ ) ./flashrom -r firmware.old #save current flash ROM just in case ./flashrom -wv firmware.new #write and verify new flash ROM image Also tried: $ cat c.c #include <stdio.h> #include <inttypes.h> #include <netinet/in.h> #include <stdlib.h> #include <string.h> #include <sys/types.h> #include <sys/stat.h> #include <fcntl.h> #include <unistd.h> #define lengthof(x) (sizeof(x)/sizeof(x[0])) uint16_t checksum(const uint8_t* data, int len) { uint16_t sum = 0; int i; for (i=0; i<len; i++) sum+=*(data+i); return htons(sum); } void usage(void) { fprintf(stderr,"Usage: therm_limit [0,50,53,56,60,63,66,70]\n"); fprintf(stderr,"Report therm limit of terminal in BIOS\n"); fprintf(stderr,"If temp specifed, it is changed if required.\n"); exit(EXIT_FAILURE); } #define CHKSUM_START 51 #define CHKSUM_END 109 #define THERM_OFFSET 67 #define THERM_SHIFT 0 #define THERM_MASK (0x7 << THERM_SHIFT) #define THERM_OFF 0 uint8_t thermal_limits[]={0,50,53,56,60,63,66,70}; #define THERM_MAX (lengthof(thermal_limits)-1) #define DEV_NVRAM "/dev/nvram" #define NVRAM_MAX 114 uint8_t nvram[NVRAM_MAX]; int main(int argc, char* argv[]) { int therm_request = -1; if (argc>2) usage(); if (argc==2) { if (*argv[1]=='-') usage(); therm_request=atoi(argv[1]); int i; for (i=0; i<lengthof(thermal_limits); i++) if (thermal_limits[i]==therm_request) break; if (i==lengthof(thermal_limits)) usage(); else therm_request=i; } int fd_nvram=open(DEV_NVRAM, O_RDWR); if (fd_nvram < 0) { fprintf(stderr,"Error opening %s [%m]\n", DEV_NVRAM); exit(EXIT_FAILURE); } if (read(fd_nvram, nvram, sizeof(nvram))==-1) { fprintf(stderr,"Error reading %s [%m]\n", DEV_NVRAM); close(fd_nvram); exit(EXIT_FAILURE); } uint16_t chksum = *(uint16_t*)(nvram+CHKSUM_END); printf("%04X\n",chksum); exit(0); if (chksum == checksum(nvram+CHKSUM_START, CHKSUM_END-CHKSUM_START)) { uint8_t therm_byte = *(uint16_t*)(nvram+THERM_OFFSET); uint8_t therm_status=(therm_byte & THERM_MASK) >> THERM_SHIFT; printf("Current thermal limit: %d°C\n", thermal_limits[therm_status]); if ( (therm_status == therm_request) ) therm_request=-1; if (therm_request != -1) { if (therm_status != therm_request) printf("Setting thermal limit to %d°C\n", thermal_limits[therm_request]); uint8_t new_therm_byte = (therm_byte & ~THERM_MASK) | (therm_request << THERM_SHIFT); *(uint8_t*)(nvram+THERM_OFFSET) = new_therm_byte; *(uint16_t*)(nvram+CHKSUM_END) = checksum(nvram+CHKSUM_START, CHKSUM_END-CHKSUM_START); (void) lseek(fd_nvram,0,SEEK_SET); if (write(fd_nvram, nvram, sizeof(nvram))!=sizeof(nvram)) { fprintf(stderr,"Error writing %s [%m]\n", DEV_NVRAM); close(fd_nvram); exit(EXIT_FAILURE); } } } else { fprintf(stderr,"checksum failed. Aborting\n"); close(fd_nvram); exit(EXIT_FAILURE); } return EXIT_SUCCESS; } $ gcc c.c -o bios # ./bios 16DB

  Read the article

• New spreadsheet accompanying SmartAssembly 6.0 provides statistics for prioritizing bug fixes

  - by Jason Crease

  One problem developers face is how to prioritize the many voices providing input into software bugs. If there is something wrong with a function that is the darling of a particular user, he or she tends to want action - now! The developer's dilemma is how to ascertain that the problem is major or minor, and when it should be addressed. Now there is a new spreadsheet accompanying SmartAssembly that provides exactly that information in an objective manner. This might upset those used to getting their way by being the loudest or pushiest, but ultimately it will ensure that the biggest problems get the priority they deserve. Here's how it works: Feature Usage Reporting (FUR) in SmartAssembly 6.0 provides a wealth of data about how your software is used by its end-users, but in the SmartAssembly UI the data isn't mined to its full extent. The new Excel spreadsheet for FUR extracts statistics from that data and presents them in easy-to-understand forms. I developed the spreadsheet feature in Microsoft Excel, using a fair amount of VBA. The spreadsheet connects directly to the database which stores the feature-usage data, and shows a wide variety of statistics and tables extracted from that data.  You want to know what percentage of users have used the 'Export as XML' button?  No problem.  How popular is v5.3 is compared to v5.1?  There's graphs for that. You need to know whether you have more users in Russia or Brazil? There's a big pie chart for that. I recently witnessed the spreadsheet in use here at Red Gate Software. My bug is exposed as minor While testing new features in .NET Reflector, I found a usability bug in the Refresh button and filed it in the Red Gate bug-tracking system. The bug was labelled "V.NEXT MINOR," which means it would be fixed in the next point release. Although I'm a professional tester, I'm not much different than most software users when they discover a bug that affects them personally: I wanted it fixed immediately. There was an ulterior motive at play here, of course. I would get to see my colleagues put the spreadsheet to work. The Reflector team loaded up the spreadsheet to view the feature-usage statistics that SmartAssembly collected for the refresh button. The resulting statistics showed that only 8% of users have ever pressed the Refresh button, and only 2.6% of sessions involve pressing the button. When Refresh is used, it's only pressed on average 1.6 times a session, with a maximum of 8 times during a session. This was in stark contrast to what I was doing as a conscientious tester: pressing it dozens of times per session. The spreadsheet provides evidence that my bug was a minor one. On to more serious things Based on the solid evidence uncovered by the spreadsheet, the Reflector team concluded that my experience does not represent that of the vast majority of Reflector's recorded users. The Reflector team had ample data to send me back to my desk and keep the bug classified as "V.NEXT MINOR." The team then went back to fixing more serious bugs. If I'm in the shoes of the user, I might not be thoroughly happy, but I cannot deny that the evidence clearly placed me in a very small minority. Next time I'm hoping the spreadsheet will prove that my bug is more important. Find out more about Feature-Usage Reporting here. The spreadsheet is available for free download here.

  Read the article

• Using Content Analytics for More Effective Engagement

  - by Kellsey Ruppel

  Using Content Analytics for More Effective Engagement: Turning High-Volume Content into Templates for Success By Mitchell Palski, Oracle WebCenter Sales Consultant Many organizations use Oracle WebCenter Portal to develop these basic types of portals: Intranet portals used for collaboration, employee self-service, and company communication Extranet portals used by customers and partners for self-service and support Team collaboration portals that allow users to share documents and content, track activity, and engage in discussions Portals are intended to provide a personalized, single point of interaction with web-based applications and information. The user experiences that a Portal is capable of displaying should be relevant to an individual user or class of users (a group or role). The components of a Portal that would vary based on a user’s identity include: Web content such as images, news articles, and on-screen instruction Social tools such as threaded discussions, polls/surveys, and blogs Document management tools to upload, download, and edit files Web applications that present data visualizations and data entry modules These collections of content, tools, and applications make up valuable workspaces. The challenge that a development team may have is defining which combinations are the most effective for its users. No one wants to create and manage a workspace that goes un-used or (even worse) that is used but is ineffective. Oracle WebCenter Portal provides you with the capabilities to not only rapidly develop variations of portals, but also identify which portals are the most effective and should be re-used throughout an enterprise. Capturing Portal AnalyticsOracle WebCenter Portal provides an analytics service that allows administrators and business users to track and analyze portal usage. These analytics are captured in the form of: Usage tracking metrics Behavior tracking User Profile Correlation The out-of-the-box task reports that come with Oracle WebCenter Portal include: WebCenter Portal Traffic Page Traffic Login Metrics Portlet Traffic Portlet Response Time Portlet Instance Traffic Portlet Instance Response Time Search Metrics Document Metrics Wiki Metrics Blog Metrics Discussion Metrics Portal Traffic Portal Response Time By determining the usage and behavior tracking metrics that are associated with specific user profiles (including groups and roles), your administrators will be able to identify the components of your solution that are the most valuable.  Your first step as an administrator should be to identify the specific pages and/or components are used the most frequently. Next, determine the user(s) or user-group(s) that are accessing those high-use elements of a portal. It is also important to determine patterns in high-usage and see if they correlate to a specific schedule. One of the goals of any development team (especially those that are following Agile methodologies) should be to develop reusable web components to minimize redundant development. Oracle WebCenter Portal provides you the tools to capture the successful workspaces that have already been developed and identified so that they can be reused for similar user demographics. Re-using Successful PortalsWhen creating a new Portal in Oracle WebCenter, developers have the option to base that portal on a template that includes: Pre-seeded data such as pages, tools, user roles, and look-and-feel assets Specific sub-sets of page-layouts, tools, and other resources to standardize what is added to a Portal’s pages Any custom components that your team creates during development cycles Once you have identified a successful workspace and its most valuable components, leverage Oracle WebCenter’s ability to turn that custom portal into a portal template. By creating a template from your already successful portal, you are empowering your enterprise by providing a starting point for future initiatives. Your new projects, new teams, and new web pages can benefit from lessons learned and adjustments that have already been made to optimize user experiences instead of starting from scratch. ***For a complete explanation of how to work with Portal Templates, be sure to read the Fusion Middleware documentation available online.

  Read the article

• I.T. Chargeback : Core to Cloud Computing

  - by Anand Akela

  Contributed by Mark McGill Consolidation and Virtualization have been widely adopted over the years to help deliver benefits such as increased server utilization, greater agility and lower cost to the I.T. organization. These are key enablers of cloud, but in themselves they do not provide a complete cloud solution. Building a true enterprise private cloud involves moving from an admin driven world, where the I.T. department is ultimately responsible for the provisioning of servers, databases, middleware and applications, to a world where the consumers of I.T. resources can provision their infrastructure, platforms and even complete application stacks on demand. Switching from an admin-driven provisioning model to a user-driven model creates some challenges. How do you ensure that users provisioning resources will not provision more than they need? How do you encourage users to return resources when they have finished with them so that others can use them? While chargeback has existed as a concept for many years (especially in mainframe environments), it is the move to this self-service model that has created a need for a new breed of chargeback applications for cloud. Enabling self-service without some form of chargeback is like opening a shop where all of the goods are free. A successful chargeback solution will be able to allocate the costs of shared I.T. infrastructure based on the relative consumption by the users. Doing this creates transparency between the I.T. department and the consumers of I.T. When users are able to understand how their consumption translates to cost they are much more likely to be prudent when it comes to their use of I.T. resources. This also gives them control of their I.T. costs, as moderate usage will translate to a lower charge at the end of the month. Implementing Chargeback successfully create a win-win situation for I.T. and the consumers. Chargeback can help to ensure that I.T. resources are used for activities that deliver business value. It also improves the overall utilization of I.T. infrastructure as I.T. resources that are not needed are not left running idle. Enterprise Manager 12c provides an integrated metering and chargeback solution for Enterprise Manager Targets. This solution is built on top of the rich configuration and utilization information already available in Enterprise Manager. It provides metering not just for virtual machines, but also for physical hosts, databases and middleware. Enterprise Manager 12c provides metering based on the utilization and configuration of the following types of Enterprise Manager Target: Oracle VM Host Oracle Database Oracle WebLogic Server Using Enterprise Manager Chargeback, administrators are able to create a set of Charge Plans that are used to attach prices to the various metered resources. These plans can contain fixed costs (eg. $10/month/database), configuration based costs (eg. $10/month if OS is Windows) and utilization based costs (eg. $0.05/GB of Memory/hour) The self-service user provisioning these resources is then able to view a report that details their usage and helps them understand how this usage translates into cost. Armed with this information, the user is able to determine if the resources are delivering adequate business value based on what is being charged. Figure 1: Chargeback in Self-Service Portal Enterprise Manager 12c provides a variety of additional interfaces into this data. The administrator can access summary and trending reports. Summary reports allow the administrator to drill-down through the cost center hierarchy to identify, for example, the top resource consumers across the organization. Figure 2: Charge Summary Report Trending reports can be used for I.T. planning and budgeting as they show utilization and charge trends over a period of time. Figure 3: CPU Trend Report We also provide chargeback reports through BI Publisher. This provides a way for users who do not have an Enterprise Manager login (such as Line of Business managers) to view charge and usage information. For situations where a bill needs to be produced, chargeback can be integrated with billing applications such as Oracle Billing and Revenue Management (BRM). Further information on Enterprise Manager 12c’s integrated metering and chargeback: White Paper Screenwatch Cloud Management on OTN

  Read the article

• High Load mysql on Debian server stops every day. Why?

  - by Oleg Abrazhaev

  I have Debian server with 32 gb memory. And there is apache2, memcached and nginx on this server. Memory load always on maximum. Only 500m free. Most memory leak do MySql. Apache only 70 clients configured, other services small memory usage. When mysql use all memory it stops. And nothing works, need mysql reboot. Mysql configured use maximum 24 gb memory. I have hight weight InnoDB bases. (400000 rows, 30 gb). And on server multithread daemon, that makes many inserts in this tables, thats why InnoDB. There is my mysql config. [mysqld] # # * Basic Settings # default-time-zone = "+04:00" user = mysql pid-file = /var/run/mysqld/mysqld.pid socket = /var/run/mysqld/mysqld.sock port = 3306 basedir = /usr datadir = /var/lib/mysql tmpdir = /tmp language = /usr/share/mysql/english skip-external-locking default-time-zone='Europe/Moscow' # # Instead of skip-networking the default is now to listen only on # localhost which is more compatible and is not less secure. # # * Fine Tuning # #low_priority_updates = 1 concurrent_insert = ALWAYS wait_timeout = 600 interactive_timeout = 600 #normal key_buffer_size = 2024M #key_buffer_size = 1512M #70% hot cache key_cache_division_limit= 70 #16-32 max_allowed_packet = 32M #1-16M thread_stack = 8M #40-50 thread_cache_size = 50 #orderby groupby sort sort_buffer_size = 64M #same myisam_sort_buffer_size = 400M #temp table creates when group_by tmp_table_size = 3000M #tables in memory max_heap_table_size = 3000M #on disk open_files_limit = 10000 table_cache = 10000 join_buffer_size = 5M # This replaces the startup script and checks MyISAM tables if needed # the first time they are touched myisam-recover = BACKUP #myisam_use_mmap = 1 max_connections = 200 thread_concurrency = 8 # # * Query Cache Configuration # #more ignored query_cache_limit = 50M query_cache_size = 210M #on query cache query_cache_type = 1 # # * Logging and Replication # # Both location gets rotated by the cronjob. # Be aware that this log type is a performance killer. #log = /var/log/mysql/mysql.log # # Error logging goes to syslog. This is a Debian improvement :) # # Here you can see queries with especially long duration log_slow_queries = /var/log/mysql/mysql-slow.log long_query_time = 1 log-queries-not-using-indexes # # The following can be used as easy to replay backup logs or for replication. # note: if you are setting up a replication slave, see README.Debian about # other settings you may need to change. #server-id = 1 #log_bin = /var/log/mysql/mysql-bin.log server-id = 1 log-bin = /var/lib/mysql/mysql-bin #replicate-do-db = gate log-bin-index = /var/lib/mysql/mysql-bin.index log-error = /var/lib/mysql/mysql-bin.err relay-log = /var/lib/mysql/relay-bin relay-log-info-file = /var/lib/mysql/relay-bin.info relay-log-index = /var/lib/mysql/relay-bin.index binlog_do_db = 24avia expire_logs_days = 10 max_binlog_size = 100M read_buffer_size = 4024288 innodb_buffer_pool_size = 5000M innodb_flush_log_at_trx_commit = 2 innodb_thread_concurrency = 8 table_definition_cache = 2000 group_concat_max_len = 16M #binlog_do_db = gate #binlog_ignore_db = include_database_name # # * BerkeleyDB # # Using BerkeleyDB is now discouraged as its support will cease in 5.1.12. #skip-bdb # # * InnoDB # # InnoDB is enabled by default with a 10MB datafile in /var/lib/mysql/. # Read the manual for more InnoDB related options. There are many! # You might want to disable InnoDB to shrink the mysqld process by circa 100MB. #skip-innodb # # * Security Features # # Read the manual, too, if you want chroot! # chroot = /var/lib/mysql/ # # For generating SSL certificates I recommend the OpenSSL GUI "tinyca". # # ssl-ca=/etc/mysql/cacert.pem # ssl-cert=/etc/mysql/server-cert.pem # ssl-key=/etc/mysql/server-key.pem [mysqldump] quick quote-names max_allowed_packet = 500M [mysql] #no-auto-rehash # faster start of mysql but no tab completition [isamchk] key_buffer = 32M key_buffer_size = 512M # # * NDB Cluster # # See /usr/share/doc/mysql-server-*/README.Debian for more information. # # The following configuration is read by the NDB Data Nodes (ndbd processes) # not from the NDB Management Nodes (ndb_mgmd processes). # # [MYSQL_CLUSTER] # ndb-connectstring=127.0.0.1 # # * IMPORTANT: Additional settings that can override those from this file! # The files must end with '.cnf', otherwise they'll be ignored. # !includedir /etc/mysql/conf.d/ Please, help me make it stable. Memory used /etc/mysql # free total used free shared buffers cached Mem: 32930800 32766424 164376 0 139208 23829196 -/+ buffers/cache: 8798020 24132780 Swap: 33553328 44660 33508668 Maybe my problem not in memory, but MySQL stops every day. As you can see, cache memory free 24 gb. Thank to Michael Hampton? for correction. Load overage on server 3.5. Maybe hdd or another problem? Maybe my config not optimal for 30gb InnoDB ? I'm already try mysqltuner and tunung-primer.sh , but they marked all green. Mysqltuner output mysqltuner >> MySQLTuner 1.0.1 - Major Hayden <[email protected]> >> Bug reports, feature requests, and downloads at http://mysqltuner.com/ >> Run with '--help' for additional options and output filtering -------- General Statistics -------------------------------------------------- [--] Skipped version check for MySQLTuner script [OK] Currently running supported MySQL version 5.5.24-9-log [OK] Operating on 64-bit architecture -------- Storage Engine Statistics ------------------------------------------- [--] Status: -Archive -BDB -Federated +InnoDB -ISAM -NDBCluster [--] Data in MyISAM tables: 112G (Tables: 1528) [--] Data in InnoDB tables: 39G (Tables: 340) [--] Data in PERFORMANCE_SCHEMA tables: 0B (Tables: 17) [!!] Total fragmented tables: 344 -------- Performance Metrics ------------------------------------------------- [--] Up for: 8h 18m 33s (14M q [478.333 qps], 259K conn, TX: 9B, RX: 5B) [--] Reads / Writes: 84% / 16% [--] Total buffers: 10.5G global + 81.1M per thread (200 max threads) [OK] Maximum possible memory usage: 26.3G (83% of installed RAM) [OK] Slow queries: 1% (259K/14M) [!!] Highest connection usage: 100% (201/200) [OK] Key buffer size / total MyISAM indexes: 1.5G/5.6G [OK] Key buffer hit rate: 100.0% (6B cached / 1M reads) [OK] Query cache efficiency: 74.3% (8M cached / 11M selects) [OK] Query cache prunes per day: 0 [OK] Sorts requiring temporary tables: 0% (0 temp sorts / 247K sorts) [!!] Joins performed without indexes: 106025 [!!] Temporary tables created on disk: 49% (351K on disk / 715K total) [OK] Thread cache hit rate: 99% (249 created / 259K connections) [!!] Table cache hit rate: 15% (2K open / 13K opened) [OK] Open file limit used: 15% (3K/20K) [OK] Table locks acquired immediately: 99% (4M immediate / 4M locks) [!!] InnoDB data size / buffer pool: 39.4G/5.9G -------- Recommendations ----------------------------------------------------- General recommendations: Run OPTIMIZE TABLE to defragment tables for better performance MySQL started within last 24 hours - recommendations may be inaccurate Reduce or eliminate persistent connections to reduce connection usage Adjust your join queries to always utilize indexes Temporary table size is already large - reduce result set size Reduce your SELECT DISTINCT queries without LIMIT clauses Increase table_cache gradually to avoid file descriptor limits Variables to adjust: max_connections (> 200) wait_timeout (< 600) interactive_timeout (< 600) join_buffer_size (> 5.0M, or always use indexes with joins) table_cache (> 10000) innodb_buffer_pool_size (>= 39G) Mysql primer output -- MYSQL PERFORMANCE TUNING PRIMER -- - By: Matthew Montgomery - MySQL Version 5.5.24-9-log x86_64 Uptime = 0 days 8 hrs 20 min 50 sec Avg. qps = 478 Total Questions = 14369568 Threads Connected = 16 Warning: Server has not been running for at least 48hrs. It may not be safe to use these recommendations To find out more information on how each of these runtime variables effects performance visit: http://dev.mysql.com/doc/refman/5.5/en/server-system-variables.html Visit http://www.mysql.com/products/enterprise/advisors.html for info about MySQL's Enterprise Monitoring and Advisory Service SLOW QUERIES The slow query log is enabled. Current long_query_time = 1.000000 sec. You have 260626 out of 14369701 that take longer than 1.000000 sec. to complete Your long_query_time seems to be fine BINARY UPDATE LOG The binary update log is enabled Binlog sync is not enabled, you could loose binlog records during a server crash WORKER THREADS Current thread_cache_size = 50 Current threads_cached = 45 Current threads_per_sec = 0 Historic threads_per_sec = 0 Your thread_cache_size is fine MAX CONNECTIONS Current max_connections = 200 Current threads_connected = 11 Historic max_used_connections = 201 The number of used connections is 100% of the configured maximum. You should raise max_connections INNODB STATUS Current InnoDB index space = 214 M Current InnoDB data space = 39.40 G Current InnoDB buffer pool free = 0 % Current innodb_buffer_pool_size = 5.85 G Depending on how much space your innodb indexes take up it may be safe to increase this value to up to 2 / 3 of total system memory MEMORY USAGE Max Memory Ever Allocated : 23.46 G Configured Max Per-thread Buffers : 15.84 G Configured Max Global Buffers : 7.54 G Configured Max Memory Limit : 23.39 G Physical Memory : 31.40 G Max memory limit seem to be within acceptable norms KEY BUFFER Current MyISAM index space = 5.61 G Current key_buffer_size = 1.47 G Key cache miss rate is 1 : 5578 Key buffer free ratio = 77 % Your key_buffer_size seems to be fine QUERY CACHE Query cache is enabled Current query_cache_size = 200 M Current query_cache_used = 101 M Current query_cache_limit = 50 M Current Query cache Memory fill ratio = 50.59 % Current query_cache_min_res_unit = 4 K MySQL won't cache query results that are larger than query_cache_limit in size SORT OPERATIONS Current sort_buffer_size = 64 M Current read_rnd_buffer_size = 256 K Sort buffer seems to be fine JOINS Current join_buffer_size = 5.00 M You have had 106606 queries where a join could not use an index properly You have had 8 joins without keys that check for key usage after each row join_buffer_size >= 4 M This is not advised You should enable "log-queries-not-using-indexes" Then look for non indexed joins in the slow query log. OPEN FILES LIMIT Current open_files_limit = 20210 files The open_files_limit should typically be set to at least 2x-3x that of table_cache if you have heavy MyISAM usage. Your open_files_limit value seems to be fine TABLE CACHE Current table_open_cache = 10000 tables Current table_definition_cache = 2000 tables You have a total of 1910 tables You have 2151 open tables. The table_cache value seems to be fine TEMP TABLES Current max_heap_table_size = 2.92 G Current tmp_table_size = 2.92 G Of 366426 temp tables, 49% were created on disk Perhaps you should increase your tmp_table_size and/or max_heap_table_size to reduce the number of disk-based temporary tables Note! BLOB and TEXT columns are not allow in memory tables. If you are using these columns raising these values might not impact your ratio of on disk temp tables. TABLE SCANS Current read_buffer_size = 3 M Current table scan ratio = 2846 : 1 read_buffer_size seems to be fine TABLE LOCKING Current Lock Wait ratio = 1 : 185 You may benefit from selective use of InnoDB. If you have long running SELECT's against MyISAM tables and perform frequent updates consider setting 'low_priority_updates=1'

  Read the article

• PC powers off at random times

  - by Timo Huovinen

  Short Version After experiencing some problems with Mobo batteries my PC started to power off at random times, the power off is instant and sudden and does not restart afterwards, need help figuring out the cause. Facts: Powers off when PC is playing games Powers off when PC is idle Powers off when PC is in safe mode Powers off when PC is in BIOS Powers off when PC is booted through a Windows installation USB Replaced the motherboard battery several times Replaced the 650W PSU with a 750W PSU Replaced the RAM Swapped the RAM between slots Re-applied thermal paste to the CPU Checked if the motherboard touches the case Nothing is overclocked PC Specs PC specs: OS: Windows 7 Ultimate SP1 RAM: klingston 1333MHz 4GB stick CPU: AMD Phenom II x4 955 Mobo: Gigabyte 88GMA-UD2H rev 2.2 Motherboard battery: CR2032 3v HDD: 500GB Seagate ST3500418AS ATA Device Graphics: ATI/AMD Radeon HD 6870 Very Long version Around 10 months ago I built a brand new gaming PC. Around 6 months ago it's time setting in windows started resetting to the year 2010. I swapped the Motherboard battery for a new one of the exact same size and shape and voltage, and the problems disappeared...for around 2 weeks. Then the same problem happened again, time gets reset, I swapped the battery again, and the problem was gone for good and everything was great for about 3 months.. then another problem started happening, the PC started to power off suddenly and without warning at completely random times, sometimes the PC works for and hour, sometimes 5 minutes. So I read on the forums that it might be either the PSU or the motherboard Battery or RAM or HDD or the Graphics card or the CPU or the motherboard or the drivers or a Virus or Grounding issues, or something short circuiting, basically it can be anything... I spent some days researching, and decided to remove the possibility of a virus. I reset the CMOS, cleared all BIOS settings and reinstalled windows 7 after a full format of the HDD, but the random power off kept happening. I then disabled the restart on error option in windows and looked at the event log for error events, but they did not help me figure out the problem. Network list service depends on network location awareness the dependency group failed to start Source Kernel Power Event 41 Task Category 63 Source Disk Event ID 11 Task Category None The driver detected a controller error on device disk I took apart the PC, every little piece, re-applied some expensive thermal paste to the CPU, and double checked that none of the pieces are touching the PC case. The problem was gone, the PC no longer powered off randomly I re-attached the graphics card and all was good for 4 months... then the power off problem appeared again, but was happening at high intervals, the PC would shutdown once in 2 days on average, at random points in time, sometimes when it's idle all day long, sometimes when it's running CRYSIS 2. I checked the CPU temperature, because I know that AMD CPU's have a built in protection mechanism that switches off the PC if the CPU gets too hot, and the Temp was 50C system temp, and 45C CPU after running the PC all day long (I did not do tests to see if there are any temperature spikes, don't know how to do them) Originally the PSU that powered the PC was 650Watts and had one 4 pin cable to power the CPU, I replaced it with a new 750Watts PSU which has two 4 pin cables for the CPU, but the problem remained. I removed the graphics card and let the motherboard use the built in one, but the PC kept suddenly powering off at random times. I took apart the PC completely again, and re-applied thermal paste to the CPU, added lots of insulation, and checked for any type of short-circuit possibility again and again, but the problem remained. The problem was like that for some months. I replaced the Battery a couple of times over the time, changed lots of options in windows, and tried everything I could, but it kept powering off, so I stopped using the PC as much as I used to, just living with the random power offs from time to time, until a couple of days ago, when the power off happens almost immediately after powering on the PC. I replaced the RAM with a brand new one, but that did not help. Took apart the PC again, checked for anything anywhere that might cause it, found some small scratches on the very edge of the motherboard to the left of the PCI express x16 slot. This might cause the problem, I thought, but the scratch looks very superficial, not deep at all, and if the scratch did harm the motherboard, wouldn't it cause it to not start at all? And why did it start to power off a while ago, and then suddenly stop powering off? The scratches could not have vanished??? did chkdsk \d but it powered off when it was at 75% I removed the hard disks, the graphics card, while I fiddled with the BIOS settings, and suddenly the PC shut down while I was looking at the BIOS version. This makes me realize, it is not caused by: HDD, Windows, Drivers or the Graphics card I cleared the CMOS again, updated the BIOS from F5 to F6f beta, but that did not help, it might even seem that the PC powers off even sooner. The shutdown even happened to me while I booted through a windows 7 installation USB and was in the repair console. I removed one of the cables powering the CPU, now only one 4pin cable powers it, and it worked for 30mins after doing that, which makes me think that it's the CPU overheating, and because it gets less power, it overheats slower? The things that I am still considering: CPU overheating (does not seem to overheat, maybe false readings?) Motherboard short circuiting (faulty motherboard?) I desperately need some advice in what is faulty, is it a faulty Motherboard or an overheating CPU? or maybe something else? I have been breaking my head over this problem over a span of 6 months. I'm not sure if this is a good place to ask this question, if it is not, then tell me where I can get some experienced help. More info I have also discovered a mysterious piece that seems to have fallen out of the motherboard i119.photobucket.com/albums/o126/yurikolovsky/strangepiece.jpg What is it? Looks like each time that it powers off the datetime gets reset I also found another forum post tomshardware.co.uk/forum/… except I don't have Integrated PeripheralsUSB Keyboard Function option in BIOS :S Comments summary (asked by Random moderator) Q. tell me, if the computer restarts, is it immediately? Does it take a second and then restarts? Do you see (BSOD) or hear (PSU, short circuit) any suspicious when it happens? After reading trough it, it remains the mainboard that is faulty. – JohannesM A. Immediate power off, all the fans stop instantly, all the light turn off instantly, no sound or anything, and it remains off until I turn it back on. Thanks for the feedback, faulty motherboard is what I fear. Q. Try stress-testing the system with Prime95 and see if errors or shutdowns occur when the CPU is under full load. – speakr A. Prime95 heat stress test peaked CPU heat at 60C after 5mins, it powered off after 30mins of testing in the middle of the test with no errors, Prime95 Heat test or the stress-testing with low RAM usage (small or in-place FFTs) do not report errors while testing for 10-60 mins. The power off does not seem like it is affected by Prime95 at all Makes me wonder if it's a CPU or Motherboard issue at all. Q. I had similar random/intermittent problems with my old board. It gave one of a few different symptoms: keyboard and/or mouse would die and/or the RAM wouldn't work and/or it would shut down. It was in bad shape. One problems was that my old PSU had literally burned the connector on it (browned around the pins), another was that a broken lead inside the layers of the PCB would work sometimes if it happened to be hot or if I bent the board—by jamming a hunk of wood behind it. I managed to keep the board alive for several years, but eventually nothing I did would make it work correctly anymore. – Synetech A. I will try that as the last resort, ok? ;) Q. Have you tried a different power cord, surge protector, outlet (on a different circuit). It's worth a shot just to ensure it's not subpar wiring or a week circuit (dips in power may cause shutdown if the PSU can't pull enough juice from the wall). – Kyle A. yes, I attached the PC to an entirely different outlet on a different circuit and the problem persists. After connecting it to a different outlet after starting the PC it gave me 3 long beeps and 1 short one, then the PC immediately proceeded to boot up normally. Q. Re-check your mainboard manual and all PSU connections to your mainboard to be sure that nothing is missing (e.g. 12V ATX 4-pin/6-pin connector). If you can provoke shutdowns with Prime95, then consider buying new hardware -- a stable system should run Prime95 for 24h without any errors. Prime95 mentions errors in the log when they occur and gives a summary after the stress test was stopped manually (e.g. "0 errors, 0 warnings", if all is fine) – speakr A. Re-checked, there are no more PSU connectors that I can physically connect, except the one ATX 4-pin (there are 2 that power the CPU) that I disconnected on purpose, I have reconnected it but the problem persists. Q. With one PC I had a short curcuit. The power button on the front plate had its cables soldered, but not isolated, and the contacts were very close to the metal case. A heavier touch was enough to cause a shutdown. The PC's vibration could be enough – ott-- A. yes, it seems to switch off with even the lightest touch, I switched on the PC, then pulled out the front panel power cable that connects to the motherboard so the power button does not work anymore, after 5 mins of working like that, with the power button completely disconnected, just sitting idle, the PC powered off again, I don't think it's the power button. Q. I wonder if you dare to operate components without the case, that is remove motherboard, power, disk ( just put the motherboard on a wooden desk). Don't bend the adapters when running like that. – ott-- A. yes, I do dare to do that, but only tomorrow, too tired/late right now.

  Read the article

• How to use "this" and not "this" selectors in jQuery

  - by tg4FSI

  I have 4 divs with content like below: <div class="prodNav-Info-Panel">content</div> <div class="prodNav-Usage-Panel">content</div> <div class="prodNav-Guarantee-Panel">content</div> <div class="prodNav-FAQ-Panel">content</div> And a navigation list like this: <div id="nav"> <ul id="navigation"> <li><a class="prodNav-Info" ></a></li> <li><a class="prodNav-Usage" ></a></li> <li><a class="prodNav-Guarantee"></a></li> <li><a class="prodNav-FAQ" ></a></li> </ul> </div> When the page is first displayed I show all the content by executing this: $('div.prodNav-Usage-Panel').fadeIn('slow'); $('div.prodNav-Guarantee-Panel').fadeIn('slow'); $('div.prodNav-FAQ-Panel').fadeIn('slow'); $('div.prodNav-Info-Panel').fadeIn('slow'); Now, when you click the navigation list item it reveals the clicked content and hides the others, like this: $('.prodNav-Info').click( function() { $('div.prodNav-Info-Panel').fadeIn('slow'); $('div.prodNav-Usage-Panel').fadeOut('slow'); $('div.prodNav-Guarantee-Panel').fadeOut('slow'); $('div.prodNav-FAQ-Panel').fadeOut('slow'); }); So what I have is 4 separate functions because I do not know which content is currently displayed. I know this is inefficient and can be done with a couple of lines of code. It seems like there is a way of saying: when this is clicked, hide the rest. Can I do this with something like $(this) and $(not this)? Thanks, Erik

  Read the article

• How to use "this" and not "this" selectors in qQuery

  - by tg4FSI

  I have 4 divs with content like below: <div class="prodNav-Info-Panel">content</div> <div class="prodNav-Usage-Panel">content</div> <div class="prodNav-Guarantee-Panel">content</div> <div class="prodNav-FAQ-Panel">content</div> And a navigation list like this: <div id="nav"> <ul id="navigation"> <li><a class="prodNav-Info" ></a></li> <li><a class="prodNav-Usage" ></a></li> <li><a class="prodNav-Guarantee"></a></li> <li><a class="prodNav-FAQ" ></a></li> </ul> </div> When the page is first displayed I show all the content by executing this: $('div.prodNav-Usage-Panel').fadeIn('slow'); $('div.prodNav-Guarantee-Panel').fadeIn('slow'); $('div.prodNav-FAQ-Panel').fadeIn('slow'); $('div.prodNav-Info-Panel').fadeIn('slow'); Now, when you click the navigation list item it reveals the clicked content and hides the others, like this: $('.prodNav-Info').click( function() { $('div.prodNav-Info-Panel').fadeIn('slow'); $('div.prodNav-Usage-Panel').fadeOut('slow'); $('div.prodNav-Guarantee-Panel').fadeOut('slow'); $('div.prodNav-FAQ-Panel').fadeOut('slow'); }); So what I have is 4 separate functions because I do not know which content is currently displayed. I know this is inefficient and can be done with a couple of lines of code. It seems like there is a way of saying: when this is clicked, hide the rest. Can I do this with something like $(this) and $(not this)? Thanks, Erik

  Read the article

• Can memory be cleaned up?

  - by Tom

  I am working in Delphi 5 (with FastMM installed) on a Win32 project, and have recently been trying to drastically reduce the memory usage in this application. So far, I have cut the usage nearly in half, but noticed something when working on a separate task. When I minimized the application, the memory usage shrunk from 45 megs down to 1 meg, which I attributed to it paging out to disk. When I restored it and restarted working, the memory went up only to 15 megs. As I continued working, the memory usage slowly went up again, and a minimize and restore flushed it back down to 15 megs. So to my thinking, when my code tells the system to release the memory, it is still being held on to according to Windows, and the actual garbage collection doesn't kick in until a lot later. Can anyone confirm/deny this sort of behavior? Is it possible to get the memory cleaned up programatically? If I keep using the program without doing this manual flush, I get an out of memory error after a while, and would like to eliminate that. Thanks.

  Read the article

• Anonymous union definition/declaration in a macro GNU vs VS2008

  - by Alan_m

  I am attempting to alter an IAR specific header file for a lpc2138 so it can compile with Visual Studio 2008 (to enable compatible unit testing). My problem involves converting register definitions to be hardware independent (not at a memory address) The "IAR-safe macro" is: #define __IO_REG32_BIT(NAME, ADDRESS, ATTRIBUTE, BIT_STRUCT) \ volatile __no_init ATTRIBUTE union \ { \ unsigned long NAME; \ BIT_STRUCT NAME ## _bit; \ } @ ADDRESS //declaration //(where __gpio0_bits is a structure that names //each of the 32 bits as P0_0, P0_1, etc) __IO_REG32_BIT(IO0PIN,0xE0028000,__READ_WRITE,__gpio0_bits); //usage IO0PIN = 0x0xAA55AA55; IO0PIN_bit.P0_5 = 0; This is my comparable "hardware independent" code: #define __IO_REG32_BIT(NAME, BIT_STRUCT)\ volatile union \ { \ unsigned long NAME; \ BIT_STRUCT NAME##_bit; \ } NAME; //declaration __IO_REG32_BIT(IO0PIN,__gpio0_bits); //usage IO0PIN.IO0PIN = 0xAA55AA55; IO0PIN.IO0PIN_bit.P0_5 = 1; This compiles and works but quite obviously my "hardware independent" usage does not match the "IAR-safe" usage. How do I alter my macro so I can use IO0PIN the same way I do in IAR? I feel this is a simple anonymous union matter but multiple attempts and variants have proven unsuccessful. Maybe the IAR GNU compiler supports anonymous unions and vs2008 does not. Thank you.

  Read the article

• How to stop Android GPS using "Mobile data"

  - by prepbgg

  My app requests location updates with "minTime" set to 2 seconds. When "Mobile data" is switched on (in the phone's settings) and GPS is enabled the app uses "mobile data" at between 5 and 10 megabytes per hour. This is recorded in the ICS "Data usage" screen as usage by "Android OS". In an attempt to prevent this I have unticked Settings-"Location services"-"Google's location service". Does this refer to Assisted GPS, or is it something more than that? Whatever it is, it seems to make no difference to my app's internet access. As further confirmation that it is the GPS usage by my app that is causing the mobile data access I have observed that the internet data activity indicator on the status bar shows activity when and only when the GPS indicator is present. The only way to prevent this mobile data usage seems to be to switch "Mobile data" off, and GPS accuracy seems to be almost as good without the support of mobile data. However, it is obviously unsatisfactory to have to switch mobile data off. The only permissions in the Manifest are "android.permission.ACCESS_FINE_LOCATION" (and "android.permission.WRITE_EXTERNAL_STORAGE"), so the app has no explicit permission to use internet data. The LocationManager code is ` criteria.setAccuracy(Criteria.ACCURACY_FINE); criteria.setSpeedRequired(false); criteria.setAltitudeRequired(false); criteria.setBearingRequired(true); criteria.setCostAllowed(false); criteria.setPowerRequirement(Criteria.NO_REQUIREMENT); bestProvider = lm.getBestProvider(criteria, true); if (bestProvider != null) { lm.requestLocationUpdates(bestProvider, gpsMinTime, gpsMinDistance, this); ` The reference for LocationManager.getBestProvider says If no provider meets the criteria, the criteria are loosened ... Note that the requirement on monetary cost is not removed in this process. However, despite setting setCostAllowed to false the app still incurs a potential monetary cost. What else can I do to prevent the app from using mobile data?

  Read the article

• Apply a Quartz filter while saving PDF under Mac OS X 10.6.3

  - by olpa

  Using Mac OS X API, I'm trying to save a PDF file with a Quartz filter applied, just like it is possible from the "Save As" dialog in the Preview application. So far I've written the following code (using Python and pyObjC, but it isn't important for me): -- filter-pdf.py: begin from Foundation import * from Quartz import * import objc page_rect = CGRectMake (0, 0, 612, 792) fdict = NSDictionary.dictionaryWithContentsOfFile_("/System/Library/Filters/Blue \ Tone.qfilter") in_pdf = CGPDFDocumentCreateWithProvider(CGDataProviderCreateWithFilename ("test .pdf")) url = CFURLCreateWithFileSystemPath(None, "test_out.pdf", kCFURLPOSIXPathStyle, False) c = CGPDFContextCreateWithURL(url, page_rect, fdict) np = CGPDFDocumentGetNumberOfPages(in_pdf) for ip in range (1, np+1): page = CGPDFDocumentGetPage(in_pdf, ip) r = CGPDFPageGetBoxRect(page, kCGPDFMediaBox) CGContextBeginPage(c, r) CGContextDrawPDFPage(c, page) CGContextEndPage(c) -- filter-pdf.py: end Unfortunalte, the filter "Blue Tone" isn't applied, the output PDF looks exactly as the input PDF. Question: what I missed? How to apply a filter? Well, the documentation doesn't promise that such way of creating and using "fdict" should cause that the filter is applied. But I just rewritten (as far as I can) sample code /Developer/Examples/Quartz/Python/filter-pdf.py, which was distributed with older versions of Mac (meanwhile, this code doesn't work too): ----- filter-pdf-old.py: begin from CoreGraphics import * import sys, os, math, getopt, string def usage (): print ''' usage: python filter-pdf.py FILTER INPUT-PDF OUTPUT-PDF Apply a ColorSync Filter to a PDF document. ''' def main (): page_rect = CGRectMake (0, 0, 612, 792) try: opts,args = getopt.getopt (sys.argv[1:], '', []) except getopt.GetoptError: usage () sys.exit (1) if len (args) != 3: usage () sys.exit (1) filter = CGContextFilterCreateDictionary (args[0]) if not filter: print 'Unable to create context filter' sys.exit (1) pdf = CGPDFDocumentCreateWithProvider (CGDataProviderCreateWithFilename (args[1])) if not pdf: print 'Unable to open input file' sys.exit (1) c = CGPDFContextCreateWithFilename (args[2], page_rect, filter) if not c: print 'Unable to create output context' sys.exit (1) for p in range (1, pdf.getNumberOfPages () + 1): #r = pdf.getMediaBox (p) r = pdf.getPage(p).getBoxRect(p) c.beginPage (r) c.drawPDFDocument (r, pdf, p) c.endPage () c.finish () if __name__ == '__main__': main () ----- filter-pdf-old.py: end

  Read the article

• where is c function attribute set (how to unset) with gcc

  - by cvsdave

  I am working with code from the GNU core utils, and find that the void usage() function is apparently set with the attribute "noreturn". Well, I am modifying the function, and I wish it to return (I removed the call to exit()). The compiler still complains that a "noreturn" function returns, and when using the Eclipse CDT debugger, stepping thorugh the code is anomolous - I skip over lines of code. I do not see the function be set in the .c file, and there is no .h file for this .c file. The file is df.c. I have renamed the file df_call.c. How can the compiler be finding this attribute? How can I unset it? Thanks. ======= Thanks to all contributors for their help! The short answer is "the usage() function found in GNUutils 7.4 is prototyped in system.h as 'void usage (int status) ATTRIBUTE_NORETURN'. Changing to 'void usage (int status); /*ATTRIBUTE_NORETURN;*/' resolved the issue for me, but leaves the problem of a modified system.h. The long answer is: The GNU c compiler supports assigning attributes to functions (see http://gcc.gnu.org/onlinedocs/gcc/Function-Attributes.html) one of which is "noreturn". The syntax is "attribute ((noreturn))" (see http://gcc.gnu.org/onlinedocs/gcc/Attribute-Syntax.html#Attribute-Syntax) but is often macro'd to ATTRIBUTE_NORETURN. If the attribute is set, and in this case one tries to return from the function, the executable compiles with a complaint, but compiles and runs. It will, however, behave unexpectedly (skipping over src lines in my case, maybe due to the optimization). The debugger in Eclipse CDT actually jumps past lines of code, leading the developer to doubt his senses.

  Read the article

• Differences between KVR16N11H/8 and KVR16N11/8 memory except for height?

  - by rzetterberg

  I accidentally ordered KVR16N11/8 instead of KVR16N11H/8 and I'm wondering if I'm going to have compability issues with my Intel DP67DE motherboard. When searching for compatible RAM on Kingstons site for that motherboard the KVR16N11H/8 RAM was one of the compatible ones. The KVR16N11/8 did not show up as compatible for that motherboard. The only difference I can see is that they have different physical height, or am I missing something?

  Read the article

• Vista install works on one computer, but bluescreens another (on which Vista is known to work)

  - by Ken

  I hope my explanations make some sense -- please ask for clarification if they don't. I had a computer running Windows Vista (Ultimate, 64-bit). All was well! Then one day there was a nasty power surge at the office, and it died. (We didn't have surge protectors at the office, unfortunately. I assumed our lines were conditioned elsewhere, or was not an issue here. Oops.) After some testing, it was determined that the PSU, motherboard, and RAM were bad. While waiting for new hardware to arrive, I put my hard disk in a spare PC which had identical parts (mobo/CPU/RAM/PSU/video). Everything worked perfectly. The only way I could even tell it wasn't my computer is because Vista asked to re-activate itself with the new hardware, which worked fine, too. So the hard disk seems OK. Then the new parts arrived. The old motherboard model is no longer manufactured, so it's a new one with the same CPU/RAM/videocard/etc. slots. The PSU is also new, while the RAM I'm using is from the spare PC mentioned above. When I put it together and tried booting with my old hard disk, it starts to boot Windows, and then (fairly early in the process) gives a bluescreen and immediately reboots (so I can't see whatever the bluescreen is trying to tell me). I tried "safe mode", which also bluescreened. I tried booting the Vista DVD and running the repair utility, which found a Vista install, confirmed that it would not boot, and, eventually, declared that it was unable to repair it. I installed Vista fresh on a new hard disk, with the new mobo/etc., and it works perfectly. (That's what I'm running now.) I've also booted a Linux CD here, which ran great, and I've run Memtest86+ for a while, which found no errors. So all the hardware apart from the old hard disk seems OK, too. I don't think the problem is with my old Vista hard disk, since I used that with another mobo/CPU just fine. I don't think it's any other part of the new hardware, since I'm able to use it (and test it) with no trouble. It's just the combination of my old Vista install plus the new PC hardware that's not happy. I can get my data off my old hard disk and onto my new hard disk, and reinstall my apps, but it would be nice if I could fix things so I could continue to use my old hard disk as before. The latest hypothesis I've heard is that Vista had trouble with the new hardware (i.e., motherboard), but we have no idea what to do about that (except Safe Mode, which didn't work). Suggestions? Hypotheses for what's not right about this combination of Vista install and motherboard? Thanks!

  Read the article

• Performance monitoring for apache websites

  - by instigator

  I am after something that will monitor cpu/mem usage for different apache sites. I have a web server that runs multiple websites (on different domains) and wondering if there is a tool (hopefully web-base that can send email alerts) that will show the cpu and memory usage for each website.

  Read the article

• Any reason not to disable Windows kernel paging?

  - by Nathaniel

  So I'm planning on eventually going to 2 GB (mobo max) RAM from 1 GB, and I want to disable kernel paging once I do, because I've heard it can give a performance boost (and that I believe). Any reason not to do it or any general thoughts about it? Edit: for clarification, this is not disabling general RAM paging. This is disabling having kernel memory paged (or at least parts of it, as Charlls noted).

  Read the article

• Why load increase ,ssd iops increase but cpu iowait decrease?

  - by mq44944

  There is a strange thing on my server which has a mysql running on it. The QPS is more than 4000 but TPS is less than 20. The server load is more than 80 and cpu usr is more than 86% but iowait is less than 8%. The disk iops is more than 16000 and util of disk is more than 99%. When the QPS decreases, the load decreases, the cpu iowait increases. I can't catch this! root@mypc # dmidecode | grep "Product Name" Product Name: PowerEdge R510 Product Name: 084YMW root@mypc # megacli -PDList -aALL |grep "Inquiry Data" Inquiry Data: SEAGATE ST3600057SS ES656SL316PT Inquiry Data: SEAGATE ST3600057SS ES656SL30THV Inquiry Data: ATA INTEL SSDSA2CW300362CVPR201602A6300EGN Inquiry Data: ATA INTEL SSDSA2CW300362CVPR2044037K300EGN Inquiry Data: ATA INTEL SSDSA2CW300362CVPR204402PX300EGN Inquiry Data: ATA INTEL SSDSA2CW300362CVPR204403WN300EGN Inquiry Data: ATA INTEL SSDSA2CW300362CVPR202000HU300EGN Inquiry Data: ATA INTEL SSDSA2CW300362CVPR202001E7300EGN Inquiry Data: ATA INTEL SSDSA2CW300362CVPR204402WE300EGN Inquiry Data: ATA INTEL SSDSA2CW300362CVPR204404E5300EGN Inquiry Data: ATA INTEL SSDSA2CW300362CVPR204401QF300EGN Inquiry Data: ATA INTEL SSDSA2CW300362CVPR20450001300EGN the mysql data files lie on the ssd disks which are organizaed using RAID 10. root@mypc # megacli -LDInfo -L1 -a0 Adapter 0 -- Virtual Drive Information: Virtual Disk: 1 (Target Id: 1) Name: RAID Level: Primary-1, Secondary-0, RAID Level Qualifier-0 Size:1427840MB State: Optimal Stripe Size: 64kB Number Of Drives:2 Span Depth:5 Default Cache Policy: WriteThrough, ReadAheadNone, Direct, No Write Cache if Bad BBU Current Cache Policy: WriteThrough, ReadAheadNone, Direct, No Write Cache if Bad BBU Access Policy: Read/Write Disk Cache Policy: Disk's Default Exit Code: 0x00 -------- -----load-avg---- ---cpu-usage--- ---swap--- -------------------------io-usage----------------------- -QPS- -TPS- -Hit%- time | 1m 5m 15m |usr sys idl iow| si so| r/s w/s rkB/s wkB/s queue await svctm %util| ins upd del sel iud| lor hit| 09:05:29|79.80 64.49 42.00| 82 7 6 5| 0 0|16421.1 10.6262705.9 85.2 8.3 0.5 0.1 99.5| 0 0 0 3968 0| 495482 96.58| 09:05:30|79.80 64.49 42.00| 79 7 8 6| 0 0|15907.4 230.6254409.7 6357.5 8.4 0.5 0.1 98.5| 0 0 0 4195 0| 496434 96.68| 09:05:31|81.34 65.07 42.31| 81 7 7 5| 0 0|16198.7 8.6259029.2 99.8 8.1 0.5 0.1 99.3| 0 0 0 4220 0| 508983 96.70| 09:05:32|81.34 65.07 42.31| 82 7 5 5| 0 0|16746.6 8.7267853.3 92.4 8.5 0.5 0.1 99.4| 0 0 0 4084 0| 503834 96.54| 09:05:33|81.34 65.07 42.31| 81 7 6 5| 0 0|16498.7 9.6263856.8 92.3 8.0 0.5 0.1 99.3| 0 0 0 4030 0| 507051 96.60| 09:05:34|81.34 65.07 42.31| 80 8 7 6| 0 0|16328.4 11.5261101.6 95.8 8.1 0.5 0.1 98.3| 0 0 0 4119 0| 504409 96.63| 09:05:35|81.31 65.33 42.52| 82 7 6 5| 0 0|16374.0 8.7261921.9 92.5 8.1 0.5 0.1 99.7| 0 0 0 4127 0| 507279 96.66| 09:05:36|81.31 65.33 42.52| 81 8 6 5| 0 0|16496.2 8.6263832.0 84.5 8.5 0.5 0.1 99.2| 0 0 0 4100 0| 505054 96.59| 09:05:37|81.31 65.33 42.52| 82 8 6 4| 0 0|16239.4 9.6259768.8 84.3 8.0 0.5 0.1 99.1| 0 0 0 4273 0| 510621 96.72| 09:05:38|81.31 65.33 42.52| 81 7 6 5| 0 0|16349.6 8.7261439.2 81.4 8.2 0.5 0.1 98.9| 0 0 0 4171 0| 510145 96.67| 09:05:39|81.31 65.33 42.52| 82 7 6 5| 0 0|16116.8 8.7257667.6 96.5 8.0 0.5 0.1 99.1| 0 0 0 4348 0| 513093 96.74| 09:05:40|79.60 65.24 42.61| 79 7 7 7| 0 0|16154.2 242.9258390.4 6388.4 8.5 0.5 0.1 99.0| 0 0 0 4033 0| 507244 96.70| 09:05:41|79.60 65.24 42.61| 79 7 8 6| 0 0|16583.1 21.2265129.6 173.5 8.2 0.5 0.1 99.1| 0 0 0 3995 0| 501474 96.57| 09:05:42|79.60 65.24 42.61| 81 8 6 5| 0 0|16281.0 9.7260372.2 69.5 8.3 0.5 0.1 98.7| 0 0 0 4221 0| 509322 96.70| 09:05:43|79.60 65.24 42.61| 80 7 7 6| 0 0|16355.3 8.7261515.5 104.3 8.2 0.5 0.1 99.6| 0 0 0 4087 0| 502052 96.62| -------- -----load-avg---- ---cpu-usage--- ---swap--- -------------------------io-usage----------------------- -QPS- -TPS- -Hit%- time | 1m 5m 15m |usr sys idl iow| si so| r/s w/s rkB/s wkB/s queue await svctm %util| ins upd del sel iud| lor hit| 09:05:44|79.60 65.24 42.61| 83 7 5 4| 0 0|16469.4 11.6263387.0 138.8 8.2 0.5 0.1 98.7| 0 0 0 4292 0| 509979 96.65| 09:05:45|79.07 65.37 42.77| 80 7 6 6| 0 0|16659.5 9.7266478.7 85.0 8.4 0.5 0.1 98.5| 0 0 0 3899 0| 496234 96.54| 09:05:46|79.07 65.37 42.77| 78 7 7 8| 0 0|16752.9 8.7267921.8 97.1 8.4 0.5 0.1 98.9| 0 0 0 4126 0| 508300 96.57| 09:05:47|79.07 65.37 42.77| 82 7 6 5| 0 0|16657.2 9.6266439.3 84.3 8.3 0.5 0.1 98.9| 0 0 0 4086 0| 502171 96.57| 09:05:48|79.07 65.37 42.77| 79 8 6 6| 0 0|16814.5 8.7268924.1 77.6 8.5 0.5 0.1 99.0| 0 0 0 4059 0| 499645 96.52| 09:05:49|79.07 65.37 42.77| 81 7 6 5| 0 0|16553.0 6.8264708.6 42.5 8.3 0.5 0.1 99.4| 0 0 0 4249 0| 501623 96.60| 09:05:50|79.63 65.71 43.01| 79 7 7 7| 0 0|16295.1 246.9260475.0 6442.4 8.7 0.5 0.1 99.1| 0 0 0 4231 0| 511032 96.70| 09:05:51|79.63 65.71 43.01| 80 7 6 6| 0 0|16568.9 8.7264919.7 104.7 8.3 0.5 0.1 99.7| 0 0 0 4272 0| 517177 96.68| 09:05:53|79.63 65.71 43.01| 79 7 7 6| 0 0|16539.0 8.6264502.9 87.6 8.4 0.5 0.1 98.9| 0 0 0 3992 0| 496728 96.52| 09:05:54|79.63 65.71 43.01| 79 7 7 7| 0 0|16527.5 11.6264363.6 92.6 8.5 0.5 0.1 98.8| 0 0 0 4045 0| 502944 96.59| 09:05:55|79.63 65.71 43.01| 80 7 7 6| 0 0|16374.7 12.5261687.2 134.9 8.6 0.5 0.1 99.2| 0 0 0 4143 0| 507006 96.66| 09:05:56|76.05 65.20 42.96| 77 8 8 8| 0 0|16464.9 9.6263314.3 111.9 8.5 0.5 0.1 98.9| 0 0 0 4250 0| 505417 96.64| 09:05:57|76.05 65.20 42.96| 79 7 6 7| 0 0|16460.1 8.8263283.2 93.4 8.3 0.5 0.1 98.8| 0 0 0 4294 0| 508168 96.66| 09:05:58|76.05 65.20 42.96| 80 7 7 7| 0 0|16176.5 9.6258762.1 127.3 8.3 0.5 0.1 98.9| 0 0 0 4160 0| 509349 96.72| 09:05:59|76.05 65.20 42.96| 75 7 9 10| 0 0|16522.0 10.7264274.6 93.1 8.6 0.5 0.1 97.5| 0 0 0 4034 0| 492623 96.51| -------- -----load-avg---- ---cpu-usage--- ---swap--- -------------------------io-usage----------------------- -QPS- -TPS- -Hit%- time | 1m 5m 15m |usr sys idl iow| si so| r/s w/s rkB/s wkB/s queue await svctm %util| ins upd del sel iud| lor hit| 09:06:00|76.05 65.20 42.96| 79 7 7 7| 0 0|16369.6 21.2261867.3 262.5 8.4 0.5 0.1 98.9| 0 0 0 4305 0| 494509 96.59| 09:06:01|75.33 65.23 43.09| 73 6 9 12| 0 0|15864.0 209.3253685.4 6238.0 10.0 0.6 0.1 98.7| 0 0 0 3913 0| 483480 96.62| 09:06:02|75.33 65.23 43.09| 73 7 8 12| 0 0|15854.7 12.7253613.2 93.6 11.0 0.7 0.1 99.0| 0 0 0 4271 0| 483771 96.64| 09:06:03|75.33 65.23 43.09| 75 7 9 9| 0 0|16074.8 8.7257104.3 81.7 8.1 0.5 0.1 98.5| 0 0 0 4060 0| 480701 96.55| 09:06:04|75.33 65.23 43.09| 76 7 8 9| 0 0|16221.7 9.7259500.1 139.4 8.1 0.5 0.1 97.6| 0 0 0 3953 0| 486774 96.56| 09:06:05|74.98 65.33 43.24| 78 7 8 8| 0 0|16330.7 8.7261166.5 85.3 8.2 0.5 0.1 98.5| 0 0 0 3957 0| 481775 96.53| 09:06:06|74.98 65.33 43.24| 75 7 9 9| 0 0|16093.7 11.7257436.1 93.7 8.2 0.5 0.1 99.2| 0 0 0 3938 0| 489251 96.60| 09:06:07|74.98 65.33 43.24| 75 7 5 13| 0 0|15758.9 19.2251989.4 188.2 14.7 0.9 0.1 99.7| 0 0 0 4140 0| 494738 96.70| 09:06:08|74.98 65.33 43.24| 69 7 10 15| 0 0|16166.3 8.7258474.9 81.2 8.9 0.5 0.1 98.7| 0 0 0 3993 0| 487162 96.58| 09:06:09|74.98 65.33 43.24| 74 7 9 10| 0 0|16071.0 8.7257010.9 93.3 8.2 0.5 0.1 99.2| 0 0 0 4098 0| 491557 96.61| 09:06:10|70.98 64.66 43.14| 71 7 9 12| 0 0|15549.6 216.1248701.1 6188.7 8.3 0.5 0.1 97.8| 0 0 0 3879 0| 480832 96.66| 09:06:11|70.98 64.66 43.14| 71 7 10 13| 0 0|16233.7 22.4259568.1 257.1 8.2 0.5 0.1 99.2| 0 0 0 4088 0| 493200 96.62| 09:06:12|70.98 64.66 43.14| 78 7 8 7| 0 0|15932.4 10.6254779.5 108.1 8.1 0.5 0.1 98.6| 0 0 0 4168 0| 489838 96.63| 09:06:13|70.98 64.66 43.14| 71 8 9 12| 0 0|16255.9 11.5259902.3 103.9 8.3 0.5 0.1 98.0| 0 0 0 3874 0| 481246 96.52| 09:06:14|70.98 64.66 43.14| 60 6 16 18| 0 0|15621.0 9.7249826.1 81.9 8.0 0.5 0.1 99.3| 0 0 0 3956 0| 480278 96.65|

  Read the article

• How to make Windows 7 machine allocate a lot of hard disk cache?

  - by Jian Lin

  I am recording some game play capture (recording playing of PS3 or Wii) using a PC with Windows 7 and Hauppauge 1212 HD Recorder, and I have 4GB of RAM... is there a way to increase the size of Windows 7's hard disk cache size so that writing to the hard drive can be super fast? Since there is at least 1.5GB of RAM not being used, something like allocating 1GB just as hard disk cache, is it possible?

  Read the article

• Slow Windows Explorer on Windows 7

  - by MadBoy

  I have Laptop with i7 (4 cores), 8GB ram and SSD OCZ Vertex 3 MaxIOPS which in testing that I did just now does 400mb/s+ read/write. However the responsiveness of Windows Explorer is far from being perfect. Opening up Computer, Documents, going into folders is very slow (1-5seconds). I don't have any viruses or spyware and I have tried changing properties to optimize view for General Items. I tried disabling Search Indexer but it made search in Outlook 2010 crawl and didn't bring any other effect. Even double clicking on file takes some time to open things up (like clicking a Word document). I don't have any drives mapped, my computer is not joined to domain. I have multiple VPN connections that I connect to but they all have disabled default gateways. I tried using CC Cleaner or some Windows 7 Tweaks app to disable some things. I am power user using Visual Studio, Tortoise SVN and other developer/administration apps. Any non obvious ideas? Edit: So I've been trying to pinpoint where the issue comes from and it seems that straight after reboot Windows Explorer opens very fast, when I load 3-4 programs (Royal TS, Visual Studio, Outlook) it's noticeably slower and the more programs I have it gets worse. After I start closing programs it starts working better and if I leave 2 open it's fast again. I tried doing some research with DiskMon and other programs from sysinternals but couldn't find anything suspicious. Below are stats during normal usage with a lots of programs open: - Ram usage with a lot of programs open and no swap file (i disabled it for testing): 6.95GB - CPU usage: 15%, none of the cores takes more then 50% (I have VS 2010 open x 4) HD Tune Pro: OCZ-VERTEX3 MI Benchmark Test capacity: full Read transfer rate Transfer Rate Minimum : 363.9 MB/s Transfer Rate Maximum : 505.5 MB/s Transfer Rate Average : Access Time : Burst Rate : CPU Usage : HD Tune Pro: OCZ-VERTEX3 MI File Benchmark Drive C: Transfer rate test File Size: 500 MB Sequential read 484102 KB/s Sequential write 444714 KB/s Random read 7779 IOPS Random write 16888 IOPS Random read (queue depth = 32) 73007 IOPS Random write (queue depth = 32) 69790 IOPS HD Tune Pro: OCZ-VERTEX3 MI Random Access Test capacity: full Read test Transfer size operations / sec avg. access time max. access time avg. speed 512 bytes 3260 IOPS 0.306 ms 2.106 ms 1.592 MB/s 4 KB 4161 IOPS 0.240 ms 2.006 ms 16.256 MB/s 64 KB 2382 IOPS 0.419 ms 2.367 ms 148.934 MB/s 1 MB 449 IOPS 2.225 ms 4.197 ms 449.407 MB/s Random 809 IOPS 1.235 ms 6.551 ms 410.527 MB/s HD Tune Pro: OCZ-VERTEX3 MI Extra Tests Test capacity: full Random seek 3975 IOPS 0.252 ms 1.941 MB/s Random seek 4 KB 4245 IOPS 0.236 ms 16.583 MB/s Butterfly seek 4086 IOPS 0.245 ms 1.995 MB/s Random seek / size 64 KB 3812 IOPS 0.262 ms 58.606 MB/s Random seek / size 8 MB 120 IOPS 8.348 ms 485.737 MB/s Sequential outer 4524 IOPS 0.221 ms 282.721 MB/s Sequential middle 4429 IOPS 0.226 ms 276.818 MB/s Sequential inner 5504 IOPS 0.182 ms 344.000 MB/s Burst rate 4472 IOPS 0.224 ms 279.475 MB/s

  Read the article

• Will Windows 7 work at all on my old toshiba [closed]

  - by andrew

  Windows 7 requires the following specifications: 1 gigahertz (GHz) or faster 32-bit (x86) or 64-bit (x64) processor 1 gigabyte (GB) RAM (32-bit) or 2 GB RAM (64-bit) 16 GB available hard disk space (32-bit) or 20 GB (64-bit) DirectX 9 graphics device with WDDM 1.0 or higher driver Will it work at all on my old toshiba Satellite A100 PSAA8C-SK400E Intel® Core™ Solo processor T1350 (1.86GHz, 533MHz FSB, L1 Cache 32KB/32KB, L2 Cache 2MB) Standard Memory: 2x512 MB DDR2 Intel® Graphics Media Accelerator 950 with 8MB-128MB. The main problem I can see is that the graphics is not up to it.

  Read the article

• Can we decrease page swapping?

  - by Benjamin

  My system has a 5GB RAM. And my paging file size is 2GB Even though I have many RAM, page-swapping still occurs. But I don't want to swapping. If I resize the paging file size(ex 200MB?), Doesn't Windows System do any swapping? Are there side-effects?

  Read the article

• Can we decrease page swapping?

  - by Benjamin

  My system has a 5GB RAM. And my paging file size is 2GB Even though I have many RAM, page-swapping still occurs. But I don't want to that. I know how adjust the paging file size. If I resize the paging file size(ex 200MB?), Doesn't Windows System do any swapping? Are there side-effects?

  Read the article

• Any reason not to disable Windows kernel paging?

  - by Nathaniel

  So I'm planning on eventually going to 2 GB (mobo max) RAM from 1 GB, and I want to disable kernel paging once I do, because I've heard it can give a performance boost (and that I believe). Any reason not to do it or any general thoughts about it? Edit: for clarification, this is not disabling general RAM paging. This is disabling having kernel memory paged (or at least parts of it, as Charlls noted).

  Read the article

• pc becomes slow when launching windows xp mode in windows 7

  - by user23950

  I have 2gb ram, 250GB hdd, and a pentium dual core with 2.50Ghz. I don't know why but everytime I launch the windows xp mode which only consumes 256Mb of ram(indicated in the settings). Makes my computer slow. And I only have google chrome launched. What do I do to solve this problem?

  Read the article

< Previous Page | 86 87 88 89 90 91 92 93 94 95 96 97  | Next Page >