Search Results

Search found 22158 results on 887 pages for 'message contract'.

Page 92/887 | < Previous Page | 88 89 90 91 92 93 94 95 96 97 98 99  | Next Page >

• Open Source Queuing Solutions for peek, mark as done and then remove

  - by user330114

  I am looking at open source queuing platforms that allow me do the following: I have multiple producers, multiple consumers putting data into a queue in a multithreaded environment with the specific use case: I want the ability for consumers to be able do the following Peek at a message from the queue(which should mark as the message as invisible on the queue so that other consumers cannot consume the same message) The consumer works on the message consumed and if it is able to do the work successfully, it marks the message as consumed which should permanently delete it from the queue. If the consumer dies abruptly after marking the message as consumed or fails to acknowledge successful consumption after a certain timeout, the message is made visible on the queue again so that another consumer can pick it up. I've been looking at RabbitMQ, hornetQ, ActiveMQ but I'm not sure I can get this functionality out of the box, any recommendations on a system that gives me this functionality?

  Read the article

• Why does this break statement break not work?

  - by Roman

  I have the following code: public void post(String message) { final String mess = message; (new Thread() { public void run() { while (true) { try { if (status.equals("serviceResolved")) { output.println(mess); Game.log.fine("The following message was successfully sent: " + mess); break; } else { try {Thread.sleep(1000);} catch (InterruptedException ie) {} } } catch (NullPointerException e) { try {Thread.sleep(1000);} catch (InterruptedException ie) {} } } } }).start(); } In my log file I find a lot of lines like this: The following message was successfully sent: blablabla The following message was successfully sent: blablabla The following message was successfully sent: blablabla The following message was successfully sent: blablabla And my program is not responding. It seems to me that the break command does not work. What can be a possible reason for that. The interesting thing is that it happens not all the time. Sometimes my program works fine, sometimes the above described problem happens.

  Read the article

• DeprecationWarning when pushing to Mercurial repo

  - by Josh Nankin

  I'm trying to serve a merurial repository with apache, and when I try to push to the repo I see this in the apache error.log. On the client side I get a 500 error. How do I get this to go away???? [Sun Jun 06 14:43:25 2010] [error] [client 192.168.1.8] /var/lib/python-support/python2.6/mercurial/hgweb/common.py:24: DeprecationWarning: BaseException.message has been deprecated as of Python 2.6 [Sun Jun 06 14:43:25 2010] [error] [client 192.168.1.8] self.message = message [Sun Jun 06 14:43:25 2010] [error] [client 192.168.1.8] /var/lib/python-support/python2.6/mercurial/hgweb/hgweb_mod.py:104: DeprecationWarning: BaseException.message has been deprecated as of Python 2.6 [Sun Jun 06 14:43:25 2010] [error] [client 192.168.1.8] if not inst.message: [Sun Jun 06 14:43:25 2010] [error] [client 192.168.1.8] /var/lib/python-support/python2.6/mercurial/hgweb/hgweb_mod.py:106: DeprecationWarning: BaseException.message has been deprecated as of Python 2.6 [Sun Jun 06 14:43:25 2010] [error] [client 192.168.1.8] return '0\\n%s\\n' % inst.message,

  Read the article

• Getting data from function loaded after current function

  - by Hwang

  I have 2 functions, 1 loaded before another. Some value are determine by the other function data, but since one of it has to load before the other 1, how should I get the data that is loaded after current function? private function wMessage():void { Message.width=Name.width+20; } private function wName():void { Name.x=(Message.x+Message.textWidth)-Name.textWidth; Name.y=Message.y+Message.height; } I've taken out some other unnecessary codes, but as you can see Name position is set according by the position + width of Message, but I want Message's width to be not smaller than Name

  Read the article

• Cannot find suitable formatter for custom class object

  - by Ganesha87

  I'm writing messages to a Message Queue in C# as follows: ObjectMsg objMsg = new ObjMsg(1,"ascii",20090807); Message m = new Message(); m.Formatter = new BinaryMessageFormatter(); m.body = objMsg; queue.Send(m); and I'm trying to read the messages as follows: Message m = new Message() m.Formatter = new BinaryMessageFormatter(); MessageQueue mq = new MessageQueue("./pqueue"); m = mq.Recieve(); ObjMsg msg = (ObjMsg )m.Body; However I'm getting an error message which says: "Cannot find a formatter capable of reading this message."

  Read the article

• YII Mail Generate unwanted ascii character in HTML mail

  - by CedSha

  I use YII-Mail just by copying the sample but I always get some ascii charcters in my generated links Where they come from and how to avoid them ? $message = new YiiMailMessage; $message->view = 'mail'; $message->setBody(array('model'=>$model), 'text/html'); $message->subject = Yii::t('tr','my subject'); $message->addTo('[email protected]'); $message->from = '[email protected]'; Yii::app()->mail->send($message); and in view file 'mail' <h1><?php echo(Yii::t('tr','This is HTML mail')); ?></h1> <?php echo CHtml::link('Mylink', array('controller/view', 'id'=>$model->id)); ?> The resulted email source looks like this <h1>This is HTML mail</h1> <a href=3D"/testdrive/index.php?r=3D ....

  Read the article

• Doctrine: textarea line breaks & nl2br

  - by Tom

  Hi, I'm pulling my hair out with something that should be very simple: getting line breaks to show up properly in text that's returned from the database with Doctrine 1.2 I'm saving a message: $body = [text from a form textarea]; $m = new Message(); $m->setSubject($subject); $m->setBody($body); $m->save(); Querying the message: $q = Doctrine_Query::create() ->from('Message m') ->where('m.message_id = ?', $id) ->limit(1); $this->message = $q->execute(array(), Doctrine_Core::HYDRATE_ARRAY); In my template: echo $message[0]['body'] ... outputs the text without line breaks echo ln2br($message[0]['body']) ... no difference ... and I've tried every combination I could think of. Is Doctrine doing something to line breaks that's affecting this, or is there something that I'm just missing? Any help would be appreciated. Thanks.

  Read the article

• Is it possible to access JSON properties with relative syntax when using JSON defined functions?

  - by Justin Vincent

  // JavaScript JSON var myCode = { message : "Hello World", helloWorld : function() { alert(this.message); } }; myCode.helloWorld(); The above JavaScript code will alert 'undefined'. To make it work for real the code would need to look like the following... (note the literal path to myCode.message) // JavaScript JSON var myCode = { message : "Hello World", helloWorld : function() { alert(myCode.message); } }; myCode.helloWorld(); My question is... if I declare functions using json in this way, is there some "relative" way to get access to myCode.message or is it only possible to do so using the literal namespace path myCode.message?

  Read the article

• Is this the right way of handling command line arguments?

  - by shadyabhi

  ask_username = True ask_password = True ask_message = True ask_number = True def Usage(): print '\t-h, --help: View help' print '\t-u, --username: Username' print '\t-p, --password: Password' print '\t-n, --number: numbber to send the sms' print '\t-m, --message: Message to send' sys.exit(1) opts, args = getopt(sys.argv[1:], 'u:p:m:n:h',["username=","password=","message=","number=","help"]) print opts, args for o,v in opts: if o in ("-h", "--help"): Usage() elif o in ("-u", "--username"): username = v ask_username = False elif o in ("-p", "--password"): passwd = v ask_password = False elif o in ("-m", "--message"): message = v ask_message = False elif o in ("-n", "--number"): number = v ask_number = False #Credentials taken here if ask_username: username = raw_input("Enter USERNAME: ") if ask_password: passwd = getpass() if ask_message: message = raw_input("Enter Message: ") if ask_number: number = raw_input("Enter Mobile number: ") I dont think it is, because I am using 4 objects just for checking if command line argument was provided... Guide me with the best way of doing it..

  Read the article

• How can I use a variable as a jQuery option value?

  - by mattgorecki

  I currently have jQuery code that looks like this: if ($.url.param("s") == "error") { $.gritter.add({ title: 'Error!', text: $.url.param('message') }); } I'm checking to see if the request variable s exists in the url (ie. http://example.com/?s=error&message=this%20is%20my%20message and then showing a popup message that contains information from request variable message. The popup works just fine, but the message variable isn't populated, the plugin asks for a string as a value for the text option. What is the proper way to grab the message variable?

  Read the article

• How to fix "BASIC runtime error 1; Type: com.sun.star.uno.Runtime Exception, Message: Toolbar do not exist " error in Libreoffice calc, Ubuntu 12.04

  - by PDeb

  I get the following error while openning a .xls file in Libreoffice Calc, Ubuntu 12.04 [LibreOffice 3.5.5.2; Build ID: 350m 1 (Build:2)] To overcome this I checked the LibreOffice Security Level to Low under Macro Security (from Tools---- Options--- Security tab. Then I went ahead intalling java by running the following commands from the terminal window (with some tips from various forums) sudo add-apt-repository ppa:libreoffice/ppa sudo apt-get update sudo apt-get install libreoffice libreoffice-java-common libreoffice-math libreoffice-gnome libreoffice-java-common Still I got the BASIC runtime error (as in the title), even after clicking Tools---- Options ---- Java and checking the 'Use a Java runtime environment option' and then clicking on 'Sun Microsystems Inc' under listed JRE environments installed. Even I ran the following commands to install latest Java run time environments from terminal window sudo apt-get install openjdk-7-jre icedtea-7-plugin But still I get the same Basicruntime error (details as in the title bar). This particular file opens perfectly in Microsoft Excel 2007, in Win XP Professional.

  Read the article

• Upgrading Sharepoint MOSS 2007 Farm to Sharepoint 2010 "waiting to get a lock to upgrade the farm"

  - by Wes Weeks

  My first inplace upgrade of a MOSS 2007 farm to sharepoint went pretty smooth. I read the preupgrade documentation and was comfortable with the steps.  Since it was a fairly new installation of Moss changes were minimal and I wasn't anticipating too many problems The one issue I got was after installing the software on all of the farm.  I went to the first machine which ran Sharepoint 2010 central administration and ran the Sharepoint 2010 Products Configuration Wizard.  I received the message that I would need to run the configuration on each server in the farm.  Fair enough, I expected as much. The wizard completed without issue on the first server, but when I tried to run it on the others it hung with a "waiting to get a lock to upgrade the farm" message.  It hung for about 10 minutes and then the wizard failed.  Did a few searches on Google and Bing and got 0 results for that message.  None, Nothing, Zilch.  I'm on my own... For grins, hit the help button on the configuration wizard and it seemed to indicate that the configuration wizard needed to be run on all farm servers simultaneously.  I started it again on the first server to the point I got the message about needing to be run on all servers on the farm and then started the wizard on the other servers and ran it to that point as well.  I then clicked ok on the first server and then the subsuquent servers. It took a while and it did hang on the lock message for some time, but then it did kick off and completed succesfully on all of them.  Yeah! Hope this helps someone else!  Now there should be at least one post with this error message on it!

  Read the article

• All my emails to Yahoo!, Hotmail and AOL are going to Spam, though I've implemented every validation

  - by Chetan

  Hi, I've implemented everything and checked everything (SPF, DomainKey, DKIM, reverse lookup), and only Gmail is allowing my emails to go to Inbox. Yahoo, Hotmail and AOL are all sending my messages to Spam. What am I doing wrong? Please help! Following are the headers of messages to Yahoo, Hotmail and AOL. I've changed names and domain names. The domain names I'm sending mail from are polluxapp.com and gemini.polluxapp.com. Yahoo: From Shift Licensing Tue Jan 26 21:55:14 2010 X-Apparently-To: [email protected] via 98.136.167.163; Tue, 26 Jan 2010 13:59:12 -0800 Return-Path: X-YahooFilteredBulk: 208.115.108.162 X-YMailISG: gPlFT1YWLDtTsHSCXAO2fxuGq5RdrsMxPffmkJFHiQyZW.2RGdDQ8OEpzWDYPS.MS_D5mvpu928sYN_86mQ2inD9zVLaVNyVVrmzIFCOHJO2gPwIG8c2L8WajG4ZRgoTwMFHkyEsefYtRLMg8AmHKnkS0PkPscwpVHtuUD91ghsTSqs4lxEMqhqw60US0cwMn_r_DrWNEUg_sESZsYeZpJcCCPL0wd6zcfKmtYaIkidsth3gWJPJgpwWtkgPvwsJUU_cmAQ8hAQ7RVM1usEs80PzihTLDR1yKc4RJCsesaf4NUO_yN1cPsbFyiaazKikC.eiQk4Z3VU.8O5Vd8i7mPNyOeAjyt7IgeA_ X-Originating-IP: [208.115.108.162] Authentication-Results: mta1035.mail.sk1.yahoo.com from=example.com; domainkeys=pass (ok); from=example.com; dkim=permerror (bad sig) Received: from 127.0.0.1 (EHLO gemini.example.com) (208.115.108.162) by mta1035.mail.sk1.yahoo.com with SMTP; Tue, 26 Jan 2010 13:59:12 -0800 Received: from gemini.example.com (gemini [127.0.0.1]) by gemini.example.com (Postfix) with ESMTP id 3984E21A0167 for ; Tue, 26 Jan 2010 13:55:14 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha1; c=relaxed; d=example.com; h=to :subject:from:content-type:message-id:date; s=mail; bh=bRIHfxE3S e+YeCrIOqziZsiESJA=; b=J+D56Czff+6wGjQycLEvHyT32+06Nngf+6h7Ep6DL SmmJv3ihiAFJIJiPxiwLNpUsOSHhwJYjYQtynbBnag40A6EUBIsucDR+VoEYD+Cc 9L0dV3QD5D77VpG9PnRQDQa91R+NPIt5og9xbYfUWJ1b/jXkZopb0VTM+H9tandM 24= DomainKey-Signature: a=rsa-sha1; c=nofws; d=example.com; h=to:subject :from:content-type:message-id:date; q=dns; s=mail; b=pO5YvvjGTXs 3Qa83Ibq9woLq5VSsxUD5uoSrjNrW9ICMmdWyJpb9oT5byFR9hMthomTmfGWkkh6 3VxtD0hb0HVonN+1iheqJ9QBBOctadLCAOPZV3mfA99XUu7Y0DR2qtkU/UkSe8In 5PENWFbwub88ZsRDiW3hCbNHl+UO8Jsc= Received: by gemini.example.com (Postfix, from userid 502) id 386DE21A0166; Tue, 26 Jan 2010 13:55:14 -0800 (PST) To: [email protected] Subject: Shift License For James Xavier From: "Shift Licensing" Content-type: text/html Message-Id: <[email protected] Date: Tue, 26 Jan 2010 13:55:14 -0800 (PST) Content-Length: 282` Hotmail: X-Message-Delivery: Vj0xLjE7dXM9MDtsPTA7YT0wO0Q9MjtTQ0w9Ng== X-Message-Status: n:0 X-SID-PRA: [email protected] X-AUTH-Result: NONE X-Message-Info: 6sSXyD95QpWzUBaRfzf3NMbaiSGCCYGXSczlzLw49r01I25elu3oYM0V2uNa8BV2O7DOiFEeewTBKMtN+PW+ig== Received: from gemini.example.com ([208.115.108.162]) by snt0-mc4-f7.Snt0.hotmail.com with Microsoft SMTPSVC(6.0.3790.3959); Tue, 26 Jan 2010 13:18:53 -0800 Received: from gemini.example.com (gemini [127.0.0.1]) by gemini.example.com (Postfix) with ESMTP id 9431321A0167 for ; Tue, 26 Jan 2010 13:18:53 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha1; c=relaxed; d=gemini.example.com; h=to :subject:message-id:date:from; s=mail; bh=DLF0k+uELpY6If5o3SWlSj 7j0vw=; b=nAMpb47xTVh73y6a2rf6V1rtYHuufr46dtuwWtHyFC85QKfZJReJJL oFIPjgEC28/1wSdy8VbfLG1g64W1hvnJjet3rcyv3ANNYxnFaiH5yt3SDEiLxydS gjCmNcZXyiVsWtpv7atVRO/t/Own+oFB9zz/9mj43Bhm4bnZ2cTno= DomainKey-Signature: a=rsa-sha1; c=nofws; d=gemini.example.com; h=to :subject:message-id:date:from; q=dns; s=mail; b=sFpNxlskyz4MYT38 BA/rQ6ZAcQjhy7STkLPckrCDVVZcE4/zukHyARq7guMtYCCEjXoIbVEtNikPC97F cGpJGGZrppTGjx62N0flxG8hvwejiJYnUJF1EIP4JckGWyEI+21vtWLLQ27eegtN fs9OkIQ2iUPC/4u8N1eqiff0VZU= Received: by gemini.example.com (Postfix, from userid 504) id 8ED7221A0166; Tue, 26 Jan 2010 13:18:53 -0800 (PST) To: [email protected] Subject: Testing this Message-Id: <[email protected] Date: Tue, 26 Jan 2010 13:18:53 -0800 (PST) From: [email protected] Return-Path: [email protected] X-OriginalArrivalTime: 26 Jan 2010 21:18:54.0039 (UTC) FILETIME=[29CEE670:01CA9ECD] AOL: X-AOL-UID: 3158.1902377530 X-AOL-DATE: Tue, 26 Jan 2010 5:07:23 PM Eastern Standard Time Return-Path: Received: from rly-mg06.mx.aol.com (rly-mg06.mail.aol.com [172.20.83.112]) by air-mg06.mail.aol.com (v126.13) with ESMTP id MAILINMG061-a1d4b5f6787a4; Tue, 26 Jan 2010 17:07:22 -0500 Received: from gemini.example.com (gemini.example.com [208.115.108.162]) by rly-mg06.mx.aol.com (v125.7) with ESMTP id MAILRELAYINMG067-a1d4b5f6787a4; Tue, 26 Jan 2010 17:07:04 -0500 Received: from gemini.example.com (gemini [127.0.0.1]) by gemini.example.com (Postfix) with ESMTP id 32B3821A0167 for ; Tue, 26 Jan 2010 14:07:03 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha1; c=relaxed; d=gemini.example.com; h=to :subject:message-id:date:from; s=mail; bh=RL0GLHd3dZ8IlIHoHIhA/U cLtUE=; b=BKg4p3qnaIdFRjAbvUa+Hwcyc6W91v4B4hN95dVymJrxyUBycWMUSC nzKmJ5QllhCYjwO+S7GrRdmlFpjBaK8kt2qmdCyC2UuiDF6xY6MXx/DBF56QpYtZ YDY4kXdiEMSbooH14B4CCPhaCTdC1wCtV0diat3EANCLxSDYAYq5k= DomainKey-Signature: a=rsa-sha1; c=nofws; d=gemini.example.com; h=to :subject:message-id:date:from; q=dns; s=mail; b=fDSjNpfWs7TfGXda uio8qbJIyD+UmPL+C0GM1VeeV8FADj6JiYIT1nT3iBwSHlrLFCJ1wxPbE4d9CGl8 gQkPIV6T4TL7ha052nur0EOWoBLoBAOmhTshF/gsIY+/KMibbIczuRyTgIGVV5Tw GZVGFddVFOYgee7SAu0KNFm7aIk= Received: by gemini.example.com (Postfix, from userid 504) id 2D5F521A0166; Tue, 26 Jan 2010 14:07:03 -0800 (PST) To: [email protected] Subject: Testing Message-Id: <[email protected] Date: Tue, 26 Jan 2010 14:07:03 -0800 (PST) From: [email protected] X-AOL-IP: 208.115.108.162 X-AOL-SCOLL-AUTHENTICATION: mail_rly_antispam_dkim-d227.1 ; domain : gemini.example.com DKIM : pass X-Mailer: Unknown (No Version) Content-Type: text/plain; charset="US-ASCII" Content-Transfer-Encoding: 7bit

  Read the article

• Oracle B2B 11g - Transport Layer Acknowledgement

  - by Nitesh Jain Oracle

  In Health Care Industry,Acknowledgement or Response should be sent back very fast. Once any message received, Acknowledgement should be sent back to TP. Oracle B2B provides a solution to send acknowledgement or Response from transport layer of mllp that is called as immediate acknowledgment. Immediate acknowledgment is generated and transmitted in the transport layer. It is an alternative to the functional acknowledgment, which generates after processing/validating the data in document layer. Oracle B2B provides four types of immediate acknowledgment: Default: Oracle B2B parses the incoming HL7 message and generates an acknowledgment from it. This mode uses the details from incoming payload and generate the acknowledgement based on incoming HL7 message control number, sender and application identification. By default, an Immediate ACK is a generic ACK. Trigger event can also sent back by using Map Trigger Event property. If mapping the MSH.10 of the ACK with the MSH.10 of the incoming business message is required, then enable the Map ACK Control ID property. Simple: B2B sends the predefined acknowledgment message to the sender without parsing the incoming message. Custom: Custom immediate Ack/Response mode gives a user to define their own response/acknowledgement. This is configurable using file in the Custom Immediate ACK File property. Negative: In this case, immediate ACK will be returned only in the case of exceptions.

  Read the article

• SonicOS Enhanced 5.8.1.2 L2TP VPN Authentication Failed

  - by Dean A. Vassallo

  I have a SonicWall TZ 215 running SonicOS Enhanced 5.8.1.2-6o. I have configured the L2TP VPN using the default crypto suite ESP: 3DES/HMAC SHA1 (IKE). Proposals are as such: IKE (Phase 1) Proposal DH Group: Group 2 Encryption: 3DES Authentication: SHA1 Life Time (seconds): 28800 Ipsec (Phase 2) Proposal Protocol: ESP Encryption: 3DES Authentication: SHA1 Enable Perfect Forward Secrecy DISABLED Life Time (seconds): 28800 When attempting to connect via my Mac OS X client I get an authentication error. It appears to pass the pre-authentication but fails to complete. I am at a complete loss. I reconfigured from scratch multiple times...used simple usernames and passwords to verify this wasn't a miskeyed password issue. I have Here are the logs (noted IP has been removed for privacy): 7/1/13 8:19:05.174 PM pppd[1268]: setup_security_context server port: 0x1503 7/1/13 8:19:05.190 PM pppd[1268]: publish_entry SCDSet() failed: Success! 7/1/13 8:19:05.191 PM pppd[1268]: publish_entry SCDSet() failed: Success! 7/1/13 8:19:05.191 PM pppd[1268]: pppd 2.4.2 (Apple version 727.1.1) started by dean, uid 501 7/1/13 8:19:05.192 PM pppd[1268]: L2TP connecting to server ‘0.0.0.0’ (0.0.0.0)... 7/1/13 8:19:05.193 PM pppd[1268]: IPSec connection started 7/1/13 8:19:05.208 PM racoon[1269]: accepted connection on vpn control socket. 7/1/13 8:19:05.209 PM racoon[1269]: Connecting. 7/1/13 8:19:05.209 PM racoon[1269]: IPSec Phase 1 started (Initiated by me). 7/1/13 8:19:05.209 PM racoon[1269]: IKE Packet: transmit success. (Initiator, Main-Mode message 1). 7/1/13 8:19:05.209 PM racoon[1269]: >>>>> phase change status = Phase 1 started by us 7/1/13 8:19:05.231 PM racoon[1269]: >>>>> phase change status = Phase 1 started by peer 7/1/13 8:19:05.231 PM racoon[1269]: IKE Packet: receive success. (Initiator, Main-Mode message 2). 7/1/13 8:19:05.234 PM racoon[1269]: IKE Packet: transmit success. (Initiator, Main-Mode message 3). 7/1/13 8:19:05.293 PM racoon[1269]: IKE Packet: receive success. (Initiator, Main-Mode message 4). 7/1/13 8:19:05.295 PM racoon[1269]: IKE Packet: transmit success. (Initiator, Main-Mode message 5). 7/1/13 8:19:05.315 PM racoon[1269]: IKEv1 Phase 1 AUTH: success. (Initiator, Main-Mode Message 6). 7/1/13 8:19:05.315 PM racoon[1269]: IKE Packet: receive success. (Initiator, Main-Mode message 6). 7/1/13 8:19:05.315 PM racoon[1269]: IKEv1 Phase 1 Initiator: success. (Initiator, Main-Mode). 7/1/13 8:19:05.315 PM racoon[1269]: IPSec Phase 1 established (Initiated by me). 7/1/13 8:19:06.307 PM racoon[1269]: IPSec Phase 2 started (Initiated by me). 7/1/13 8:19:06.307 PM racoon[1269]: >>>>> phase change status = Phase 2 started 7/1/13 8:19:06.308 PM racoon[1269]: IKE Packet: transmit success. (Initiator, Quick-Mode message 1). 7/1/13 8:19:06.332 PM racoon[1269]: attribute has been modified. 7/1/13 8:19:06.332 PM racoon[1269]: IKE Packet: receive success. (Initiator, Quick-Mode message 2). 7/1/13 8:19:06.332 PM racoon[1269]: IKE Packet: transmit success. (Initiator, Quick-Mode message 3). 7/1/13 8:19:06.333 PM racoon[1269]: IKEv1 Phase 2 Initiator: success. (Initiator, Quick-Mode). 7/1/13 8:19:06.333 PM racoon[1269]: IPSec Phase 2 established (Initiated by me). 7/1/13 8:19:06.333 PM racoon[1269]: >>>>> phase change status = Phase 2 established 7/1/13 8:19:06.333 PM pppd[1268]: IPSec connection established 7/1/13 8:19:07.145 PM pppd[1268]: L2TP connection established. 7/1/13 8:19:07.000 PM kernel[0]: ppp0: is now delegating en0 (type 0x6, family 2, sub-family 3) 7/1/13 8:19:07.146 PM pppd[1268]: Connect: ppp0 <--> socket[34:18] 7/1/13 8:19:08.709 PM pppd[1268]: MS-CHAPv2 mutual authentication failed. 7/1/13 8:19:08.710 PM pppd[1268]: Connection terminated. 7/1/13 8:19:08.710 PM pppd[1268]: L2TP disconnecting... 7/1/13 8:19:08.711 PM pppd[1268]: L2TP disconnected 7/1/13 8:19:08.711 PM racoon[1269]: IPSec disconnecting from server 0.0.0.0 7/1/13 8:19:08.711 PM racoon[1269]: IKE Packet: transmit success. (Information message). 7/1/13 8:19:08.712 PM racoon[1269]: IKEv1 Information-Notice: transmit success. (Delete IPSEC-SA). 7/1/13 8:19:08.712 PM racoon[1269]: IKE Packet: transmit success. (Information message). 7/1/13 8:19:08.712 PM racoon[1269]: IKEv1 Information-Notice: transmit success. (Delete ISAKMP-SA). 7/1/13 8:19:08.713 PM racoon[1269]: glob found no matches for path "/var/run/racoon/*.conf" 7/1/13 8:19:08.714 PM racoon[1269]: pfkey DELETE failed: No such file or directory

  Read the article

• Redirecting wildcard emails to one email with postfix

  - by Burning the Codeigniter

  I'm creating a bounce email system where emails can reply to messages on my site. However when the emails are sent to the user containing the previous message, the Reply-To field contains an email something like this [email protected] (which contains the ID at the end). If the user replies, the reply message will be sent back to [email protected] which of course, doesn't have its own mailbox, except the [email protected]. How would I redirect all incoming messages coming from a specific wildcard notification-message-*@mysite.com to [email protected]? I did some research, but no solid part worked, including the luser_relay = [email protected] and putting notification-message-* in the postfix aliases table, the notification@ has a Maildir, so the emails would go into it. I am using Ubuntu 11.04.

  Read the article

• Tips On Using The Service Contracts Import Program

  - by LuciaC

  Prior to release 12.1 there was no supported way to import contracts into the EBS Service Contracts application - there were no public APIs nor contract load programs provided.  From release 12.1 onwards the 'Service Contracts Import Program' is provided to load service contracts into the application. The Service Contracts Import functionality is explained in How to Use the Service Contracts Import Program - Scope and Limitations (Doc ID 1057242.1).  This note includes an attached document which explains the program architecture, shows the Entity Relationship Diagram and details the interface table definitions. The Import program takes data from the interface tables listed below and populates the contracts schema tables:  OKS_USAGE_COUNTERS_INTERFACE OKS_SALES_CREDITS_INTERFACEOKS_NOTES_INTERFACEOKS_LINES_INTERFACEOKS_HEADERS_INTERFACEOKS_COVERED_LEVELS_INTERFACEThese interface tables must be loaded via a custom load program.The Service Contracts Import concurrent request is then submitted to create contracts from this legacy data. The parameters to run the Import program are:  Parameter Description  Mode Validate only, Import  Batch Number Batch_Id (unique id populated into the OKS_HEADERS_INTERFACE table)  Number of Workers Number of workers required (these are spawned as separate sub-requests)  Commit size Represents number of successfully processed contracts commited to database The program spawns sub-requests for the import worker(s) and the 'Service Contracts Import Report'.  The data is validated prior to import and into the Contracts tables and will report errors in the Service Contracts Import Report program output file (Import Execution Report).  Troubleshooting tips are provided in R12.1 - Common Service Contract Import Errors (Doc ID 762545.1); this document lists some, but not all, import errors.  The document will be updated over time.  Additional help is given in Debugging Tip for Service Contracts Import Errors (Doc ID 971426.1).After you successfully import contracts, you can purge the records from the interface tables by running the Service Contracts Import Purge concurrent program. Note that there is no supported way to mass delete data from the Contracts schema tables once they are populated, so data loaded by the Import program must be fully tested and verified before the program is run to load data into a Production system.A Service Contracts Import Test program has been provided which will take an existing contract in the application and load the interface tables using the data from that contract.  This can be used as an example for guidance on how to load the interface tables.  The Test program functionality is explained in How to Use the Service Contracts Test Import Program Provided in Release 12.1 (Doc ID 761209.1).  Note that the Test program has some limitations which do not apply to the full Import program and is not a supported program, it is simply a testing tool.  

  Read the article

• Is it common practice to hire third parties to do code reviews for contractors?

  - by blueberryfields

  I recently observed some contract offers which included a "code review by third party" clause - the contract would not pay out fully until the code review was completed and it received a pass. I was surprised, especially considering that these were fairly simple, and small-scale contracts (churning out vanity apps for the iPhone). Is this kind of third-party code review a common thing to run into when contracting out as a programmer?

  Read the article

• Named output parameters vs return values

  - by Abyx

  Which code is better: // C++ void handle_message(...some input parameters..., bool& wasHandled) void set_some_value(int newValue, int* oldValue = nullptr) // C# void handle_message(...some input parameters..., out bool wasHandled) void set_some_value(int newValue, out int oldValue) or bool handle_message(...some input parameters...) ///< Returns -1 if message was handled //(sorry, this documentation was broken a year ago and we're too busy to fix it) int set_some_value(T newValue) // (well, it's obvious what this function returns, so I didn't write any documentation for it) The first one doesn't have and need any documentation. It's a self-documenting code. Output value clearly says what it means, and it's really hard to make a change like this: - void handle_message(Message msg, bool& wasHandled) { - wasHandled = false; - if (...) { wasHandled = true; ... + void handle_message(Message msg, int& wasHandled) { + wasHandled = -1; + if (...) { wasHandled = ...; With return values such change could be done easily /// Return true if message was handled - bool handle_message(Message msg) { + int handle_message(Message msg) { ... - return true; + return -1; Most of compilers don't (and can't) check documentation written in comments. Programmers also tend to ignore comments while editing code. So, again, the question is: if subroutine has single output value, should it be a procedure with well-named self-documenting output parameter, or should it be a function which returns an unnamed value and have a comment describing it?

  Read the article

• Create device receive SMS parse to text ( SMS Gateway )

  - by Chris Okyen

  I want to use a server as a device to run a script to parse a SMS text in the following way. I. The person types in a specific and special cell phone number (Similar to Facebook’s 32556 number used to post on your wall) II. The user types a text message. III. The user sends the text message. IV. The message is sent to some kind of Device (the server) or SMS Gateway and receives it. V. The thing described above that the message is sent to then parse the test message. I understand that these three question will mix Programming and Server Stuff and could reside here or at DBA.SE How would I make such a cell phone number (described in step I) that would be sent to the Device? How do I create the device that then would receive it? Finally, how do I Parse the text message? I don't want to pay for cloud space, server scripting stuff or server space; I want to just use a free webserver to do this totally free - meaning I will have to do more on my own... My question can be seen in more depth in this visual flowchart

  Read the article

• Operating System not Found after installing Ubuntu in a Sony Vaio

  - by diego8arock

  I just bought a Sony Vaio SVS15115FLB that came with Windows 7, after enjoying the PC graphic power for a little, I decided it was time to install Ubuntu 12.04. First, I inserted a USB stick, reboot, press F11 but a message saying that no OS was found on the USB, so then I used a live CD. It booted fine and I installed Ubuntu, then when it was time to restart the PC, it didn't boot to GRUB but it went straight to Windows and it began an startup error and was looking for a solution, after it was done, it restarted and then it booted again to Windows and to the same start up error solution thing. I freaked out, so I booted again the Ubuntu live CD, and installed Ubuntu over everything, after it installed I rebooted and then a message appeared saying Operating system Not Found, and I have no idea why. So I Googled again and found this post on Boot Partition, I did everything exactly on that post, but it didn't work (by the way, this was the message): The boot files of [Ubuntu 12.04 LTS] are far from the start of the disk. Your BIOS may not detect them. You may want to retry after creating a /boot partition (EXT4, >200MB, start of the disk). This can be performed via tools such as gParted. Then select this partition via the [Separate /boot partition:] option of [Boot Repair]. It appeared the first time, then I did it all again and then it was gone. I rebooted and nothing, the same Operating System not found message appeared. So I decided to create a partition for Windows, hoping for something, but the message still appears. I really have no idea what to do, but there is something odd, if I insert the USB stick containing Ubuntu 11.10, the message that says that there is no OS in the PendDrive flashes for a fraction of a second and the boot straight to Ubuntu 12.04 without problems (and booted to Windows when I installed it, ignoring Ubuntu), right now I'm using it like that, but its pretty annoying. Can anyone advise me how to fix this? I'm no expert on this kind of things (boot, GRUB, recovery and stuff like that).

  Read the article

• Quit my job (for a new job). Old job wants me to be available for contracting. Steps to take?

  - by Zak

  The company I am leaving has asked that I make myself available to answer questions and/or debug programs occasionally should the need arise. I'm not opposed to this. After searching google for some king of standard contract for this sort of thing, I didn't see any. Is there a standard contract for this sort of thing that you use? Are there any other steps I should take to ensure this kind of arrangement works smoothly?

  Read the article

• using gmail to send mails from your php?

  - by ajsie

  i've read some threads here in SO that someone managed to use gmail's smtp server to send out messages from php script. so if php sends a mail to [email protected] it looks like this: php tells sendmail (smtp server) to send the message sendmail sends the message to gmail's smtp server gmail's smtp server sends the message to hotmail's smtp server so now i wonder, why should one use gmail's smtp server to send a mail? isn't it better just to send the message from sendmail to hotmail's smtp server? correct me if im wrong, but isnt all that requires for a mail to be sent a communication between TWO smtp servers, the senders and the receivers (in this case, hotmail)? and another question, why can't php just send the message directly to hotmail's smtp server, why does it have to go through a local smtp server? and why do you call it a smtp server when sendmail is just acting like a client to send a message and does not receive anything? would be great if someone could shed a light on this topic!

  Read the article

• How do I stop GNU Freetalk from automatically filling in the buddy name?

  - by Journeyman Geek

  I'm using GNU Freetalk along with expect in order to send notifications to my phone – Freetalk has a readline interface, and I use expect to make a series of non interactive scripts that send information to another Jabber account. I'd like to have these scripts end freetalk 'properly' – that is to say user@domainname message one user@domainname message two /quit which would print out message one message two then quit. However Freetalk 'helpfully' adds user@domainame automatically so I get message one message two /quit as the output. The expect script still ends, but there's a delay. How would I stop Freetalk from adding in the 'buddy' address automatically?

  Read the article

• Analytics for Windows 8 apps using Markedup

  - by nmarun

  The Windows 8 store does provide some analytics information to you in terms of downloads by market or by age group, ratings, in-app purchases. I find that a little too limiting. What if I want to know what page my users are spending most of their time or what events are being raised more frequently or are my users calling my app through the search contract I implemented or how many times was the share contract called. To answer questions like this, you need a more mature analytics framework. Markedup...(read more)

  Read the article

< Previous Page | 88 89 90 91 92 93 94 95 96 97 98 99  | Next Page >