Search Results

Search found 2666 results on 107 pages for 'graph traversal'.

Page 93/107 | < Previous Page | 89 90 91 92 93 94 95 96 97 98 99 100  | Next Page >

• Memory leak when using Workflow 4.0 SqlWorkflowInstanceStore and PersistableIdleAction.Unload

  - by Rohland

  Hi, This particular problem is driving me nuts. I wonder if anyone has experienced a similar problem. If I load up a workflow then unload it and perform a memory snapshot then the result is predictable - my workflow is no longer in memory. However, if I load up a workflow and set the PersistableIdle action to PersistableIdleAction.Unload and let the workflow idle the workflow remains in memory even though the Unload action fires. I used ANTS Memory Profiler to debug this issue. This is the object retention graph outputted showing that an internal object is hanging onto my workflow instance. Can anyone else verify this problem? My code amounts to the following: Create SqlWorkflowInstanceStore and setup lock owner handle -- At this point I take a memory snapshot Create an instance of Workflow1 Set the PersistableIdle action Apply the instancestore to Workflow1 Setup action event handlers for Idle, Unload, UnhandledException etc. Persist the workflow instance Run the workflow instance Wait for instance to idle (caused by Delay activity) Ensure the Unload action is fired -- At this point I take a second memory snapshot From the above image, it is clear that the only object referencing Workflow1 is some internal event handlers result which I have no ability to dispose of. Any clues?

  Read the article

• App crashes only after second execution only in Release configuration

  - by denbec

  Hey all, i know this is probably not an easy question to answer, as it's hard to describe on my hand. I have an app that runs without problems on the device in Debug Configuration (also multiple times). Once I put it into Release Configuration (which I need before publishing?), the app starts without problems and I can proceed to the next page, where I show an core-plot graph. BUT only if I run it from xcode. As soon as I end the App and start it again, it opens without problems, but on the next page, it crashes. Now I don't have anything to debug other than the crash report: Exception Type: EXC_BAD_ACCESS (SIGSEGV) Exception Codes: KERN_INVALID_ADDRESS at 0xcf10000a Crashed Thread: 0 Thread 0 Crashed: 0 libobjc.A.dylib 0x000026f2 objc_msgSend + 14 1 StandbyCheck 0x0001fbea -[CPXYTheme newGraph] (CPXYTheme.m:36) 2 StandbyCheck 0x00007c06 -[SCGraphCell initWithStyle:reuseIdentifier:] (SCGraphCell.m:28) 3 StandbyCheck 0x00076b4a -[TTTableViewDataSource tableView:cellForRowAtIndexPath:] (TTTableViewDataSource.m:128) 4 UIKit 0x0007797a -[UITableView(UITableViewInternal) _createPreparedCellForGlobalRow:withIndexPath:] + 514 5 UIKit 0x000776b0 -[UITableView(UITableViewInternal) _createPreparedCellForGlobalRow:] + 28 6 UIKit 0x00037e78 -[UITableView(_UITableViewPrivate) _updateVisibleCellsNow] + 940 7 UIKit 0x000367d4 -[UITableView layoutSubviews] + 176 8 StandbyCheck 0x000734b8 -[TTTableView layoutSubviews] (TTTableView.m:226) [...] Now, can someone point in any direction? What are the differences in Debug/Release Modes? How could I possibly debug this failure? I've been searching for hours now, please help me :( Thanks, Dennis

  Read the article

• How do you use asynchronous ORMs without huge callback chains?

  - by hornairs

  I'm using the relatively immature Joose Javascript ORM plugin (project page) to persist objects in an Appcelerator Titanium (company page) mobile project. Since it's client side storage, the application has to check to see if the database is initialized before starting up the ORM since it inspects the DB tables to construct the classes. My problem is that this sequence of operations (and if this one is like this, other things down the road) takes a lot of callbacks to complete. I have a lot of jumping around in the code that isn't apparent to a maintainer and results in some complex call graphs and whatnot. So, I ask these questions: How would you asynchronously initialize a database and populate it with seed data using an ORM that needs the schema to be correct to function? Do you have any general strategies or links for async/event driven programming and keeping the call graph simple and understandable? Do you have any suggestions for Javascript ORMs/meta object systems that work with HTML 5 as a storage engine and are hopefully framework agnostic? Am I just a big newb and should be able to work this out with ease? Thanks folks!

  Read the article

• adjacency list creation , out of Memory error

  - by p1

  Hello , I am trying to create an adjacency list to store a graph.The implementation works fine while storing 100,000 records. However,when I tried to store around 1million records I ran into OutofMemory Error : Exception in thread "main" java.lang.OutOfMemoryError: Java heap space at java.util.Arrays.copyOfRange(Arrays.java:3209) at java.lang.String.(String.java:215) at java.io.BufferedReader.readLine(BufferedReader.java:331) at java.io.BufferedReader.readLine(BufferedReader.java:362) at liarliar.main(liarliar.java:39) Following is my implementation HashMap<String,ArrayList<String>> adj = new HashMap<String,ArrayList<String>>(num); while ((str = in.readLine()) != null) { StringTokenizer Tok = new StringTokenizer(str); name = (String) Tok.nextElement(); cnt = Integer.valueOf(Tok.nextToken()); ArrayList<String> templist = new ArrayList<String>(cnt); while(cnt>0) { templist.add(in.readLine()); cnt--; } adj.put(name,templist); } //done creating a adjacency list I am wondering, if there is any better way to implement the adjacency list. Also, I know number of nodes right in the begining and , in the future I flatten the list as I visit nodes. Any suggestions ? Thanks

  Read the article

• How to keep text inside a circle using Cairo?

  - by miguelrios

  I a drawing a graph using Cairo (pycairo specifically) and I need to know how can I draw text inside a circle without overlapping it, by keeping it inside the bounds of the circle. I have this simple code snippet that draws a letter "a" inside the circle: ''' Created on May 8, 2010 @author: mrios ''' import cairo, math WIDTH, HEIGHT = 1000, 1000 #surface = cairo.PDFSurface ("/Users/mrios/Desktop/exampleplaces.pdf", WIDTH, HEIGHT) surface = cairo.ImageSurface (cairo.FORMAT_ARGB32, WIDTH, HEIGHT) ctx = cairo.Context (surface) ctx.scale (WIDTH/1.0, HEIGHT/1.0) # Normalizing the canvas ctx.rectangle(0, 0, 1, 1) # Rectangle(x0, y0, x1, y1) ctx.set_source_rgb(255,255,255) ctx.fill() ctx.arc(0.5, 0.5, .4, 0, 2*math.pi) ctx.set_source_rgb(0,0,0) ctx.set_line_width(0.03) ctx.stroke() ctx.arc(0.5, 0.5, .4, 0, 2*math.pi) ctx.set_source_rgb(0,0,0) ctx.set_line_width(0.01) ctx.set_source_rgb(255,0,255) ctx.fill() ctx.set_source_rgb(0,0,0) ctx.select_font_face("Georgia", cairo.FONT_SLANT_NORMAL, cairo.FONT_WEIGHT_BOLD) ctx.set_font_size(1.0) x_bearing, y_bearing, width, height = ctx.text_extents("a")[:4] print ctx.text_extents("a")[:4] ctx.move_to(0.5 - width / 2 - x_bearing, 0.5 - height / 2 - y_bearing) ctx.show_text("a") surface.write_to_png ("/Users/mrios/Desktop/node.png") # Output to PNG The problem is that my labels have variable amount of characters (with a limit of 20) and I need to set the size of the font dynamically. It must fit inside the circle, no matter the size of the circle nor the size of the label. Also, every label has one line of text, no spaces, no line breaks. Any suggestion?

  Read the article

• Trend analysis using iterative value increments

  - by Dave Jarvis

  We have configured iReport to generate the following graph: The real data points are in blue, the trend line is green. The problems include: Too many data points for the trend line Trend line does not follow a Bezier curve (spline) The source of the problem is with the incrementer class. The incrementer is provided with the data points iteratively. There does not appear to be a way to get the set of data. The code that calculates the trend line looks as follows: import java.math.BigDecimal; import net.sf.jasperreports.engine.fill.*; /** * Used by an iReport variable to increment its average. */ public class MovingAverageIncrementer implements JRIncrementer { private BigDecimal average; private int incr = 0; /** * Instantiated by the MovingAverageIncrementerFactory class. */ public MovingAverageIncrementer() { } /** * Returns the newly incremented value, which is calculated by averaging * the previous value from the previous call to this method. * * @param jrFillVariable Unused. * @param object New data point to average. * @param abstractValueProvider Unused. * @return The newly incremented value. */ public Object increment( JRFillVariable jrFillVariable, Object object, AbstractValueProvider abstractValueProvider ) { BigDecimal value = new BigDecimal( ( ( Number )object ).doubleValue() ); // Average every 10 data points // if( incr % 10 == 0 ) { setAverage( ( value.add( getAverage() ).doubleValue() / 2.0 ) ); } incr++; return getAverage(); } /** * Changes the value that is the moving average. * @param average The new moving average value. */ private void setAverage( BigDecimal average ) { this.average = average; } /** * Returns the current moving average average. * @return Value used for plotting on a report. */ protected BigDecimal getAverage() { if( this.average == null ) { this.average = new BigDecimal( 0 ); } return this.average; } /** Helper method. */ private void setAverage( double d ) { setAverage( new BigDecimal( d ) ); } } How would you create a smoother and more accurate representation of the trend line?

  Read the article

• DFS function, can you guys tell me what is the wrong with this code?

  - by danielDhobbs

  can you guys tell me what is the wrong with this code? it is not working with 1 2 1 3 1 4 2 5 2 6 2 7 2 8 3 8 3 9 4 10 1 - 4 - 10 and stop DFS function void Is_Connected(graphType* g, int v){ //function to define the graph is connected or not int i=0; g_node* w; top = NULL; g -> visited[v] = TRUE; push(v); printf("%d", v); while (top != NULL) { w = g -> adjList[v]; while (w) { if (!g -> visited[w -> vertex]) { push(w -> vertex); g -> visited[w -> vertex] = TRUE; printf("->%d", w->vertex); v = w -> vertex; w = g -> adjList[v]; } else { w = w -> link; } } i++; v = pop(); } if (i == (g -> x)-1){ //number of vertices = number of vertetices pass through puts("\nIs_Connected() result : yes"); } else{ puts("\nIs_Connected() result : no"); } }

  Read the article

• What scalability problems have you solved using a NoSQL data store?

  - by knorv

  NoSQL refers to non-relational data stores that break with the history of relational databases and ACID guarantees. Popular open source NoSQL data stores include: Cassandra (tabular, written in Java, used by Facebook, Twitter, Digg, Rackspace, Mahalo and Reddit) CouchDB (document, written in Erlang, used by Engine Yard and BBC) Dynomite (key-value, written in C++, used by Powerset) HBase (key-value, written in Java, used by Bing) Hypertable (tabular, written in C++, used by Baidu) Kai (key-value, written in Erlang) MemcacheDB (key-value, written in C, used by Reddit) MongoDB (document, written in C++, used by Sourceforge, Github, Electronic Arts and NY Times) Neo4j (graph, written in Java, used by Swedish Universities) Project Voldemort (key-value, written in Java, used by LinkedIn) Redis (key-value, written in C, used by Engine Yard, Github and Craigslist) Riak (key-value, written in Erlang, used by Comcast and Mochi Media) Ringo (key-value, written in Erlang, used by Nokia) Scalaris (key-value, written in Erlang, used by OnScale) ThruDB (document, written in C++, used by JunkDepot.com) Tokyo Cabinet/Tokyo Tyrant (key-value, written in C, used by Mixi.jp (Japanese social networking site)) I'd like to know about specific problems you - the SO reader - have solved using data stores and what NoSQL data store you used. Questions: What scalability problems have you used NoSQL data stores to solve? What NoSQL data store did you use? What database did you use before switching to a NoSQL data store? I'm looking for first-hand experiences, so please do not answer unless you have that.

  Read the article

• Plot in GNU PLOT

  - by guddi

  I have to plot many lines in GNU PLOT.No problem with the X axis. The problem that I am facing is that most of the plotted lines are at yscale [0-0.05] ,few at range 60-70 and rest at 600-700. These numbers correspond to the y axis scale values. But after I plot I can see only 3 sets of lines all messed up. There is no clearity between the lines. Line at 0 and the line at 0.003 look like one single line. If I set yrange[0:0.05], the lines between this range are clearly vissible. But I want all the lines in the same graph. I have heard of breaking axis's and multi plotting..Can they be useful? how to implement them. Anyone pls help me. Below is the sript set terminal png size 1300,1200 enhanced font 'Verdana,20 set output ' output .png’ set key font 'Verdana,16' set key bottom outside set yrange[500:1000] set xtics("25k" 25000,"50k" 50000,"75k" 75000,"100k" 100000) set grid set title 'Performance Metrics' set ylabel 'Metrices' set xlabel 'FES' plot ' input ' using 1:2 title ' A' with linespoints linewidth 4, ' input ' using 1:3 title B'with linespoints linewidth 4, 'input ' using 1:4 title ' c' with linespoints linewidth 4, 'input ' using 1:5 title 'D' with linespoints linewidth 4, ' input ' using 1:6 title 'E' with linespoints linewidth 4, ' input ' using 1:7 title 'F' with linespoints linewidth 4, ' input ' using 1:8 title 'G' with linespoints linewidth 4, ' input ' using 1:9 title ' H ' with linespoints linewidth 4, ' input ' using 1:10 title ' I' Metric ' with linespoints linewidth 4 set output set terminal windows input.dat is something like this: 25 0.002 0.05 899 455 444 0.08 0.00004 900 700 0.003 This way i have other rows. I have shown only the first one

  Read the article

• highcharts correct json input

  - by Linus

  i am trying to do a basic column chart. i have looked the examples but not sure why i do not see any graph (lines). I can see the title and subtitle appear an no javascript errors in firebug. any help please $(function () { var chart; $(document).ready(function() { chart = new Highcharts.Chart({ chart: { renderTo: 'container', type: 'column', events: { load: requestData } }, title: { text: 'Some title' }, subtitle: { text: 'subtitle' }, xAxis: { categories: [], title: { text: null } }, yAxis: { min: 0, title: { text: 'y-Axis', align: 'high' } }, tooltip: { formatter: function() { return ''+ this.series.name +': '+ this.y +' '; } }, plotOptions: { bar: { dataLabels: { enabled: true } } }, legend: { layout: 'vertical', align: 'right', verticalAlign: 'top', x: -100, y: 100, floating: true, borderWidth: 1, backgroundColor: '#FFFFFF', shadow: true }, credits: { enabled: false }, series:[] }); }); function requestData() { $.ajax({ url: 'test.json', success: function(data) { options.series[0].push(data); chart.redraw(); }, cache: false }); } }); my json input file is below [ { name: 'name1', y: [32.6,16.6,1.5] }, { name: 'name2', y: [6.7,0.2,0.6] }, { name: 'name3', y: [1,3.7,0.7] }, { name: 'name4', y: [20.3,8.8,9.5] },{ name: 'name5', y: [21.5,10,7.2] }, { name: 'name6', y: [1.4,1.8,3.7] }, { name: 'name7', y: [8.1,0,0] }, { name: 'name8', y: [28.9,8.9,6.6] } ]

  Read the article

• iphone cannot rotate views in TabBar controller

  - by Luc

  Hello, I am working on an application that consists of a TabBar controller. Within on of its tab, I have a subclass of UITableViewController, within this list I have a Core-plot graph in the first cell and some other data in the 4 following cells. When I return YES in the shouldAutorotateToInterfaceOrientation method, I would expect the autoresizing of the list view to happen, but... nothing. When I add some log in the willRotateToInterfaceOrientation method, they are not displayed. Is there something I missed ? Thanks a lot, Luc // Override to allow orientations other than the default portrait orientation. - (BOOL)shouldAutorotateToInterfaceOrientation:(UIInterfaceOrientation)interfaceOrientation { // Return YES for supported orientations //return (interfaceOrientation == UIInterfaceOrientationPortrait); NSLog(@"Orientation"); return YES; } - (void)willRotateToInterfaceOrientation:(UIInterfaceOrientation)toInterfaceOrientation duration:(NSTimeInterval)duration { [super willRotateToInterfaceOrientation:toInterfaceOrientation duration:duration]; NSLog(@"Rotating"); if (toInterfaceOrientation == UIInterfaceOrientationLandscapeRight) { NSLog(@"view land:%@", self.view); } if (toInterfaceOrientation == UIInterfaceOrientationPortrait) { NSLog(@"view portrait:%@", self.view); } }

  Read the article

• ASP.NET Applications Requests/Sec suddenly jumps to a value of about 70 million/sec. on 8 core web

  - by Subhrajit Roy

  We are doing performance testing of an ASP.NET web application with VSTS 2008. We start with 2000 users and slowly ramp up to 5000 users (reaches this user load at around 2.5 hours after the tests start, after this we stay at this user load). The total test duration is of about 6 hours During these runs we have found that the counter Requests/Sec (under category ASP.NET applications) suddenly spikes to a values of 36-72 millions !!!. This keeps on happening intermittently i.e we see this issue once in every 3 performance runs that we give on the same application. In our testing environment we have 4 web servers and interestingly enough we have found that this issue occurs only in the 8 core web servers. Summarizing ... Issue : The counter Requests/Sec (under category ASP.NET Applications) suddenly jumps to a value of about 70 million/sec. on 8 core web servers. This results in an increase in SQL server connections opened by the application. Response time goes for a toss. Error rates also show similar behaviour. However the counter ISAPI Extention Requests/sec does not show any abnormal increase. The graph of this counter almost overlaps with that of counter Requests/Sec till the time of the appearance of the spike.When the spike appears , this counter (ISAPI Extention Requests/sec) actually shows a drop. Test Settings : Performance test run with Visual Studio Team System 2008. Soak test run for 6 hours. Maximum user load 5000 users. This is load is attained at about 2.5 hours into the run and mainted for remaining duration.(i.e for around 3.5 more hrs) This issue is reproducible though happens intermittently. (i.e occurs one in three or four runs) Test Environment : Web site deployed on 4 Web Servers (Windows Server 2003). Of these 2 are 4 core machines and the remaining 2 are 8 core ones. .NET Framework 3.5 SP1 installed on all 4 web servers. Application hosted on IIS 6.0 run in Worker process isolation mode.

  Read the article

• Python: combining making two scripts into one

  - by Alex

  I have two separately made python scripts one that makes a sine wave sound based off time, and another that produces a sine wave graph that is based off the same time factors. I need help combining them into one running file. Here's the first: from struct import pack from math import sin, pi import time def au_file(name, freq, freq1, dur, vol): fout = open(name, 'wb') # header needs size, encoding=2, sampling_rate=8000, channel=1 fout.write('.snd' + pack('>5L', 24, 8*dur, 2, 8000, 1)) factor = 2 * pi * freq/8000 factor1 = 2 * pi * freq1/8000 # write data for seg in range(8 * dur): # sine wave calculations sin_seg = sin(seg * factor) + sin(seg * factor1) fout.write(pack('b', vol * 64 * sin_seg)) fout.close() t = time.strftime("%S", time.localtime()) ti = time.strftime("%M", time.localtime()) tis = float(t) tis = tis * 100 tim = float(ti) tim = tim * 100 if __name__ == '__main__': au_file(name='timeSound.au', freq=tim, freq1=tis, dur=1000, vol=1.0) import os os.startfile('timeSound.au') and the second is this: from Tkinter import * import math import time t = time.strftime("%S", time.localtime()) ti = time.strftime("%M", time.localtime()) tis = float(t) tis = tis / 100 tim = float(ti) tim = tim / 100 root = Tk() root.title("This very moment") width = 400 height = 300 center = height//2 x_increment = 1 # width stretch x_factor1 = tis x_factor2 = tim # height stretch y_amplitude = 50 c = Canvas(width=width, height=height, bg='black') c.pack() str1 = "sin(x)=white" c.create_text(10, 20, anchor=SW, text=str1) center_line = c.create_line(0, center, width, center, fill='red') # create the coordinate list for the sin() curve, have to be integers xy1 = [] xy2 = [] for x in range(400): # x coordinates xy1.append(x * x_increment) xy2.append(x * x_increment) # y coordinates xy1.append(int(math.sin(x * x_factor1) * y_amplitude) + center) xy2.append(int(math.sin(x * x_factor2) * y_amplitude) + center) sinS_line = c.create_line(xy1, fill='white') sinM_line = c.create_line(xy2, fill='yellow') root.mainloop()

  Read the article

• Problem with a chart with a polyline and a LinearGradientBrush

  - by Maurizio Reginelli

  I have a graph with a polyline contained into a canvas. I would like to set the stroke of the polyline starting from a color at the bottom and ending to another color on top. I tried with this xaml: <Polyline StrokeThickness="2"> <Polyline.Stroke> <LinearGradientBrush StartPoint="0.5,1" EndPoint="0.5,0"> <GradientStop Color="Blue" Offset="0" /> <GradientStop Color="Cyan" Offset="1" /> </LinearGradientBrush> </Polyline.Stroke> </Polyline> In this way it works but the height of the gradient is equal to the height of the polyline. I mean, if I have a polyline which goes from the bottom of the canvas to its top, the gradient is applied over the entire height of the canvas. If I have instead a horizontal polyline, the gradient is applied to its thickness. I would like to have a gradient height equal to the canvas height, independently from the polyline height. How can I achieve this?

  Read the article

• Identifying and Resolving Oracle ITL Deadlock

  - by Allan

  I have an Oracle DB package that is routinely causing what I believe is an ITL (Interested Transaction List) deadlock. The relevant portion of a trace file is below. Deadlock graph: ---------Blocker(s)-------- ---------Waiter(s)--------- Resource Name process session holds waits process session holds waits TM-0000cb52-00000000 22 131 S 23 143 SS TM-0000ceec-00000000 23 143 SX 32 138 SX SSX TM-0000cb52-00000000 30 138 SX 22 131 S session 131: DID 0001-0016-00000D1C session 143: DID 0001-0017-000055D5 session 143: DID 0001-0017-000055D5 session 138: DID 0001-001E-000067A0 session 138: DID 0001-001E-000067A0 session 131: DID 0001-0016-00000D1C Rows waited on: Session 143: no row Session 138: no row Session 131: no row There are no bit-map indexes on this table, so that's not the cause. As far as I can tell, the lack of "Rows waited on" plus the "S" in the Waiter waits column likely indicates that this is an ITL deadlock. Also, the table is written to quite often (roughly 8 insert or updates concurrently, as often as 240 times a minute), so and ITL deadlock seems like a strong possibility. I've increased the INITRANS parameter of the table and it's indexes to 100 and increased the PCT_FREE on the table from 10 to 20 (then rebuilt the indexes), but the deadlocks are still occurring. The deadlock seems to happen most often during an update, but that could just be a coincidence, as I've only traced it a couple of times. My questions are two-fold: 1) Is this actually an ITL deadlock? 2) If it is an ITL deadlock, what else can be done to avoid it?

  Read the article

• how to handle an asymptote/discontinuity with Matplotlib

  - by Geddes

  Hello all. Firstly - thanks again for all your help. Sorry not to have accepted the responses to my previous questions as I did not know how the system worked (thanks to Mark for pointing that out!). I have since been back and gratefully acknowledged the kind help I have received. My question: when plotting a graph with a discontinuity/asymptote/singularity/whatever, is there any automatic way to prevent Matplotlib from 'joining the dots' across the 'break'? (please see code/image below). I read that Sage has a [detect_poles] facility that looked good, but I really want it to work with Matplotlib. Thanks and best wishes, Geddes import matplotlib.pyplot as plt import numpy as np from sympy import sympify, lambdify from sympy.abc import x fig = plt.figure(1) ax = fig.add_subplot(111) # set up axis ax.spines['left'].set_position('zero') ax.spines['right'].set_color('none') ax.spines['bottom'].set_position('zero') ax.spines['top'].set_color('none') ax.xaxis.set_ticks_position('bottom') ax.yaxis.set_ticks_position('left') # setup x and y ranges and precision xx = np.arange(-0.5,5.5,0.01) # draw my curve myfunction=sympify(1/(x-2)) mylambdifiedfunction=lambdify(x,myfunction,'numpy') ax.plot(xx, mylambdifiedfunction(xx),zorder=100,linewidth=3,color='red') #set bounds ax.set_xbound(-1,6) ax.set_ybound(-4,4) plt.show()

  Read the article

• Silverlight: how to use a scroll viewer to wrap a list view without specifying height?

  - by John Nicholas

  I have a control that has a list that varies in length greatly. This control appears in various places meaning that i cannot calculate its position and desired height easily. Moreover all I want is for the scrollviewer to simply size itself according to its parent. currently it insists on sizing itself according to the content. currently when i have a list that exceeds the height of the screen the whole control extends off the bottom and the scrollviewer shows no bar (because it has stretched to the heigth of the contents and so thinks it is not required). I've not included code as the object graph is fairly deep. What i am looking for is a set of conditions that would cause the scrollviewer to resize itself according to its content rather than its parent. I have it working in a similar situation involving grids and datagrids, the unique part of this control is that there is a list containing controls. Any ideas? I would prefer solutions that don't require use of code behind - but im really not in a position to be choosey.

  Read the article

• Audio stream mangement in Linux

  - by User1

  I have a very complicated audio setup for a project. Here's what we have: 3 applications playing sound 2 applications recording sound 2 sound cards I really don't really have the code to any of these applications. All I want to do is monitor and control the audio streams. Here are a few examples of operations I'd like to do while the applications are running: Mute one of the incoming audio streams. Have one of the incoming audio streams do a "solo" (be the only stream that can "talk"). Get a graph (about 30 seconds worth) of the audio that each stream produced. Send one of the audio streams to soundcard #1, but all three audio streams to soundcard #2. I would likely switch audio streams every 2 minutes or so with one of the operations listed above. A GUI would be preferred. I started looking at the sound systems in Linux and it gets extremely complex and I feel like there have been many new advances in the past few years. I see jack, pulseaudio, artsd, and several other packages. They all have some promise but where should I start? Is there something someone already built that can help?

  Read the article

• Don't Allow link generates a 500 Internal Error

  - by jstawski

  I'm developing an application for Facebook using the iframe mode and ASP.NET. I'm able to use the new OAuth method that combines the allow and the extended permissions. When I click on the Allow everything works as expected, but when I click on the "Don't Allow" I get a 500 internal error. The Request For Permission url is: http://www.facebook.com/connect/uiserver.php?client_id=389845102120&scope=publish_stream%2Cuser_birthday%2Cemail&redirect_uri=http%3A%2F%2Fapps.facebook.com%2Fplumreward%2FDefault.aspx%3Fpid%3D124733857540930&display=page&next=http%3A%2F%2Fgraph.facebook.com%2Foauth%2Fauthorize_success%3Fclient_id%3D389845102120%26scope%3Dpublish_stream%252Cuser_birthday%252Cemail%26redirect_uri%3Dhttp%253A%252F%252Fapps.facebook.com%252Fplumreward%252FDefault.aspx%253Fpid%253D124733857540930%26type%3Dweb_server&cancel_url=http%3A%2F%2Fgraph.facebook.com%2Foauth%2Fauthorize_cancel%3Fclient_id%3D389845102120%26scope%3Dpublish_stream%252Cuser_birthday%252Cemail%26redirect_uri%3Dhttp%253A%252F%252Fapps.facebook.com%252Fplumreward%252FDefault.aspx%253Fpid%253D124733857540930%26type%3Dweb_server&app_id=389845102120&method=permissions.request&return_session=1&perms=publish_stream%2Cuser_birthday%2Cemail When I click don't allow it goes to http://www.facebook.com/connect/uiserver.php and then to http://graph.facebook.com/oauth/authorize_success?client_id=389845102120&scope=publish_stream%2Cuser_birthday%2Cemail&redirect_uri=http%3A%2F%2Fapps.facebook.com%2Fplumreward%2FDefault.aspx%3Fpid%3D124733857540930&type=web_server&perms&selected_profiles=567961887 with a HTTP 500 Internal Server Error. What am I doing wrong? Am I missing a setting, parameter? Is this a FB bug?

  Read the article

• SQL deadlock on delete then bulk insert

  - by StarLite

  I have an issue with a deadlock in SQL Server that I haven't been able to resolve. Basically I have a large number of concurrent connections (from many machines) that are executing transactions where they first delete a range of entries and then re-insert entries within the same range with a bulk insert. Essentially, the transaction looks like this BEGIN TRANSACTION T1 DELETE FROM [TableName] WITH( XLOCK HOLDLOCK ) WHERE [Id]=@Id AND [SubId]=@SubId INSERT BULK [TableName] ( [Id] Int , [SubId] Int , [Text] VarChar(max) COLLATE SQL_Latin1_General_CP1_CI_AS ) WITH(CHECK_CONSTRAINTS, FIRE_TRIGGERS) COMMIT TRANSACTION T1 The bulk insert only inserts items matching the Id and SubId of the deletion in the same transaction. Furthermore, these Id and SubId entries should never overlap. When I have enough concurrent transaction of this form, I start to see a significant number of deadlocks between these statements. I added the locking hints XLOCK HOLDLOCK to attempt to deal with the issue, but they don't seem to be helpling. The canonical deadlock graph for this error shows: Connection 1: Holds RangeX-X on PK_TableName Holds IX Page lock on the table Requesting X Page lock on the table Connection 2: Holds IX Page lock on the table Requests RangeX-X lock on the table What do I need to do in order to ensure that these deadlocks don't occur. I have been doing some reading on the RangeX-X locks and I'm not sure I fully understand what is going on with these. Do I have any options short of locking the entire table here?

  Read the article

• Generics with constraints hierarchy

  - by devoured elysium

  I am currently facing a very disturbing problem: interface IStateSpace<Position, Value> where Position : IPosition // <-- Problem starts here where Value : IValue // <-- and here as I don't { // know how to get away this // circular dependency! // Notice how I should be // defining generics parameters // here but I can't! Value GetStateAt(Position position); void SetStateAt(Position position, State state); } As you'll down here, both IPosition, IValue and IState depend on each other. How am I supposed to get away with this? I can't think of any other design that will circumvent this circular dependency and still describes exactly what I want to do! interface IState<StateSpace, Value> where StateSpace : IStateSpace where Value : IValue { StateSpace StateSpace { get; }; Value Value { get; set; } } interface IPosition { } interface IValue<State> where State : IState { State State { get; } } Basically I have a state space IStateSpace that has states IState inside. Their position in the state space is given by an IPosition. Each state then has one (or more) values IValue. I am simplifying the hierarchy, as it's a bit more complex than described. The idea of having this hierarchy defined with generics is to allow for different implementations of the same concepts (an IStateSpace will be implemented both as a matrix as an graph, etc). Would can I get away with this? How do you generally solve this kind of problems? Which kind of designs are used in these cases? Thanks

  Read the article

• How can I stop an auto-generated Linq to SQL class from loading ALL data?

  - by Gary McGill

  I have an ASP.NET MVC project, much like the NerdDinner tutorial example. (I'm using MVC 2, but followed the NerdDinner tutorial in order to create it). As per the instructions in part 3 of the tutorial, I've created a Linq-to-SQL model of my database by creating a "Linq to SQL Classes" (.dbml) surface, and dropping my database tables onto it. The designer has automatically added relationships between the generated classes based on my database tables. Let's say that my classes are as per the NerdDinner example, so I have Dinner and RSVP tables, where each Dinner record is associated with many RSVP records - hence in the generated classes, the Dinner object has a RSVPs property which is a list of RSVP objects. My problem is this: it appears (and I'd be gladly proved wrong on this) that as soon as I access a Dinner object, it's loading all of the corresponding RSVP objects, even if I don't use the RSVPs member. First question: is this really the default behavior for the generated classes? In my particular situation, the object graph contains many more tables (which have an order of magnitude more records), and so this is disastrous behaviour - I'd be loading tons of data when all I want to do is show the details of a single parent record. Second question: are there any properties exposed through the designer UI that would let me modify this behavior? (I can't find any). Third question: I've seen a description of how to control the loading of related records in a DataContext by using a DataShape object associated with the DataContext. Is that what I'm meant to do, and if so are there any tutorials like the NerdDinner one that would show not only how to do it, but also suggest a 'pattern' for normal use?

  Read the article

• How can I stop an auto-generated Linq to SQL class from loading ALL data?

  - by Gary McGill

  DUPLICATE of http://stackoverflow.com/questions/2433422/how-can-i-stop-an-auto-generated-linq-to-sql-class-from-loading-all-data post answers there! I have an ASP.NET MVC project, much like the NerdDinner tutorial example. (I'm using MVC 2, but followed the NerdDinner tutorial in order to create it). As per the instructions in part 3 of the tutorial, I've created a Linq-to-SQL model of my database by creating a "Linq to SQL Classes" (.dbml) surface, and dropping my database tables onto it. The designer has automatically added relationships between the generated classes based on my database tables. Let's say that my classes are as per the NerdDinner example, so I have Dinner and RSVP tables, where each Dinner record is associated with many RSVP records - hence in the generated classes, the Dinner object has a RSVPs property which is a list of RSVP objects. My problem is this: it appears (and I'd be gladly proved wrong on this) that as soon as I access a Dinner object, it's loading all of the corresponding RSVP objects, even if I don't use the RSVPs member. First question: is this really the default behavior for the generated classes? In my particular situation, the object graph contains many more tables (which have an order of magnitude more records), and so this is disastrous behaviour - I'd be loading tons of data when all I want to do is show the details of a single parent record. Second question: are there any properties exposed through the designer UI that would let me modify this behavior? (I can't find any). Third question: I've seen a description of how to control the loading of related records in a DataContext by using a DataShape object associated with the DataContext. Is that what I'm meant to do, and if so are there any tutorials like the NerdDinner one that would show not only how to do it, but also suggest a 'pattern' for normal use?

  Read the article

• Hg: How to do a rebase like git's rebase

  - by jpswain09

  Hey guys, In Git I can do this: 1. Start working on new feature: $ git co -b newfeature-123 # (a local feature development branch) do a few commits (M, N, O) master A---B---C \ newfeature-123 M---N---O 2. Pull new changes from upstream master: $ git pull (master updated with ff-commits) master A---B---C---D---E---F \ newfeature-123 M---N---O 3. Rebase off master so that my new feature can be developed against the latest upstream changes: (from newfeature-123) $ git rebase master master A---B---C---D---E---F \ newfeature-123 M---N---O I want to know how to do the same thing in Mercurial, and I've scoured the web for an answer, but the best I could find was this: http://www.selenic.com/pipermail/mercurial/2007-June/013393.html That link provides 2 examples: 1. I'll admit that this: (replacing the revisions from the example with those from my own example) hg up -C F hg branch -f newfeature-123 hg transplant -a -b newfeature-123 is not too bad, except that it leaves behind the pre-rebase M-N-O as an unmerged head and creates 3 new commits M',N',O' that represent them branching off the updated mainline. Basically the problem is that I end up with this: master A---B---C---D---E---F \ \ newfeature-123 \ M'---N'---O' \ newfeature-123 M---N---O this is not good because it leaves behind local, unwanted commits that should be dropped. The other option from the same link is hg qimport -r M:O hg qpop -a hg up F hg branch newfeature-123 hg qpush -a hg qdel -r qbase:qtip and this does result in the desired graph: master A---B---C---D---E---F \ newfeature-123 M---N---O but these commands (all 6 of them!) seem so much more complicated than $ git rebase master I want to know if this is the only equivalent in Hg or if there is some other way available that is simple like Git. Thanks!! Jamie

  Read the article

• Relational database data explorer / visualization?

  - by Ian Boyd

  Is there a tool that can let one browse relational data as a graph of connected nodes? For example, i'm faced with trying to cleanse some anomolous data. i can start with two offending rows. In this particular example, the TransactionID should, by business rules, be unique to the table, but i find a transaction that violates that rule: SELECT * FROM LCTTrans WHERE TransactionID = 1075048 LCTID TransactionID ========= ============= 4358 1075048 4359 1075048 2 row(s) affected But really what i want to begin to hunt down all the related data, to try to see which is right. So this hypothetical software would start by showing me these two rows: Next, i want to see that transaction that is linked into this table: Now that transaction points to an MAL, so show me that: Now lets add those two LCTs, that the transaction is "on". A transaction can be on only one LCT, yet this one is pointing to two: Okay computer, both of those LCTs point to an MAL and the transaction that created them, show me those: Those last two transactions, they also point at an MAL, and they themselves point to an LCT, show me those: Okay, now are there any entries in LCTTrans that point to LCTs 4358 or 4359?... And so on, and so on. Now i did all this manually, running single selects, copying and pasting uniqueidentifier keys and converting them into friendly id numbers so i could easily see the relationships. Is there software that can do this?

  Read the article

< Previous Page | 89 90 91 92 93 94 95 96 97 98 99 100  | Next Page >