Search Results

Search found 16491 results on 660 pages for 'root node'.

Page 93/660 | < Previous Page | 89 90 91 92 93 94 95 96 97 98 99 100  | Next Page >

• Unable to access intel fake RAID 1 array in Fedora 14 after reboot

  - by Sim

  Hello everyone, 1st I am relatively new to linux (but not to *nix). I have 4 disks assembled in the following intel ahci bios fake raid arrays: 2x320GB RAID1 - used for operating systems md126 2x1TB RAID1 - used for data md125 I have used the raid of size 320GB to install my operating system and the second raid I didn't even select during the installation of Fedora 14. After successful partitioning and installation of Fedora, I tried to make the second array available, it was possible to make it visible in linux with mdadm --assembe --scan , after that I created one maximum size partition and 1 maximum size ext4 filesystem in it. Mounted, and used it. After restart - a few I/O errors during boot regarding md125 + inability to mount the filesystem on it and dropped into repair shell. I commented the filesystem in fstab and it booted. To my surprise, the array was marked as "auto read only": [root@localhost ~]# cat /proc/mdstat Personalities : [raid1] md125 : active (auto-read-only) raid1 sdc[1] sdd[0] 976759808 blocks super external:/md127/0 [2/2] [UU] md127 : inactive sdc[1](S) sdd[0](S) 4514 blocks super external:imsm md126 : active raid1 sda[1] sdb[0] 312566784 blocks super external:/md1/0 [2/2] [UU] md1 : inactive sdb[1](S) sda[0](S) 4514 blocks super external:imsm unused devices: <none> [root@localhost ~]# and the partition in it was not available as device special file in /dev: [root@localhost ~]# ls -l /dev/md125* brw-rw---- 1 root disk 9, 125 Jan 6 15:50 /dev/md125 [root@localhost ~]# But the partition is there according to fdisk: [root@localhost ~]# fdisk -l /dev/md125 Disk /dev/md125: 1000.2 GB, 1000202043392 bytes 19 heads, 10 sectors/track, 10281682 cylinders, total 1953519616 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x1b238ea9 Device Boot Start End Blocks Id System /dev/md125p1 2048 1953519615 976758784 83 Linux [root@localhost ~]# I tried to "activate" the array in different ways (I'm not experienced with mdadm and the man page is gigantic so I was only browsing it looking for my answer) but it was impossible - the array would still stay in "auto read only" and the device special file for the partition it will not be in /dev. It was only after I recreated the partition via fdisk that it reappeared in /dev... until next reboot. So, my question is - How do I make the array automatically available after reboot? Here is some additional information: 1st I am able to see the UUID of the array in blkid: [root@localhost ~]# blkid /dev/sdc: UUID="b9a1149f-ae11-4fc8-a600-0d77354dc42a" SEC_TYPE="ext2" TYPE="ext3" /dev/sdd: UUID="b9a1149f-ae11-4fc8-a600-0d77354dc42a" SEC_TYPE="ext2" TYPE="ext3" /dev/md126p1: UUID="60C8D9A7C8D97C2A" TYPE="ntfs" /dev/md126p2: UUID="3d1b38a3-b469-4b7c-b016-8abfb26a5d7d" TYPE="ext4" /dev/md126p3: UUID="1Msqqr-AAF8-k0wi-VYnq-uWJU-y0OD-uIFBHL" TYPE="LVM2_member" /dev/mapper/vg00-rootlv: LABEL="_Fedora-14-x86_6" UUID="34cc1cf5-6845-4489-8303-7a90c7663f0a" TYPE="ext4" /dev/mapper/vg00-swaplv: UUID="4644d857-e13b-456c-ac03-6f26299c1046" TYPE="swap" /dev/mapper/vg00-homelv: UUID="82bd58b2-edab-4b4b-aec4-b79595ecd0e3" TYPE="ext4" /dev/mapper/vg00-varlv: UUID="1b001444-5fdd-41b6-a59a-9712ec6def33" TYPE="ext4" /dev/mapper/vg00-tmplv: UUID="bf7d2459-2b35-4a1c-9b81-d4c4f24a9842" TYPE="ext4" /dev/md125: UUID="b9a1149f-ae11-4fc8-a600-0d77354dc42a" SEC_TYPE="ext2" TYPE="ext3" /dev/sda: TYPE="isw_raid_member" /dev/md125p1: UUID="420adfdd-6c4e-4552-93f0-2608938a4059" TYPE="ext4" [root@localhost ~]# Here is how /etc/mdadm.conf looks like: [root@localhost ~]# cat /etc/mdadm.conf # mdadm.conf written out by anaconda MAILADDR root AUTO +imsm +1.x -all ARRAY /dev/md1 UUID=89f60dee:e46a251f:7475814b:d4cc19a9 ARRAY /dev/md126 UUID=a8775c90:cee66376:5310fc13:63bcba5b ARRAY /dev/md125 UUID=b9a1149f:ae114fc8:a6000d77:354dc42a [root@localhost ~]# here is how /proc/mdstat looks like after I recreate the partition in the array so that it becomes available: [root@localhost ~]# cat /proc/mdstat Personalities : [raid1] md125 : active raid1 sdc[1] sdd[0] 976759808 blocks super external:/md127/0 [2/2] [UU] md127 : inactive sdc[1](S) sdd[0](S) 4514 blocks super external:imsm md126 : active raid1 sda[1] sdb[0] 312566784 blocks super external:/md1/0 [2/2] [UU] md1 : inactive sdb[1](S) sda[0](S) 4514 blocks super external:imsm unused devices: <none> [root@localhost ~]# Detailed output regarding the array in subject: [root@localhost ~]# mdadm --detail /dev/md125 /dev/md125: Container : /dev/md127, member 0 Raid Level : raid1 Array Size : 976759808 (931.51 GiB 1000.20 GB) Used Dev Size : 976759940 (931.51 GiB 1000.20 GB) Raid Devices : 2 Total Devices : 2 Update Time : Fri Jan 7 00:38:00 2011 State : clean Active Devices : 2 Working Devices : 2 Failed Devices : 0 Spare Devices : 0 UUID : 30ebc3c2:b6a64751:4758d05c:fa8ff782 Number Major Minor RaidDevice State 1 8 32 0 active sync /dev/sdc 0 8 48 1 active sync /dev/sdd [root@localhost ~]# and /etc/fstab, with /data commented (the filesystem that is on this array): # # /etc/fstab # Created by anaconda on Thu Jan 6 03:32:40 2011 # # Accessible filesystems, by reference, are maintained under '/dev/disk' # See man pages fstab(5), findfs(8), mount(8) and/or blkid(8) for more info # /dev/mapper/vg00-rootlv / ext4 defaults 1 1 UUID=3d1b38a3-b469-4b7c-b016-8abfb26a5d7d /boot ext4 defaults 1 2 #UUID=420adfdd-6c4e-4552-93f0-2608938a4059 /data ext4 defaults 0 1 /dev/mapper/vg00-homelv /home ext4 defaults 1 2 /dev/mapper/vg00-tmplv /tmp ext4 defaults 1 2 /dev/mapper/vg00-varlv /var ext4 defaults 1 2 /dev/mapper/vg00-swaplv swap swap defaults 0 0 tmpfs /dev/shm tmpfs defaults 0 0 devpts /dev/pts devpts gid=5,mode=620 0 0 sysfs /sys sysfs defaults 0 0 proc /proc proc defaults 0 0 [root@localhost ~]# Thanks in advance to everyone that even read this whole issue :-)

  Read the article

• Dojo DnD: how to access newly copied node on onDndDrop event?

  - by toshinao

  Hi. I am working on code like the following. 01: var c1 = new dojo.dnd.Source('container1', {copyOnly:true}); // container1 is a div 02: var c2 = new dojo.dnd.Source('container2'); // container2 is a div 03: var list = []; 04: for (var i = 0; i < 3; i++) { list.push( dojo.create('div') ); } 05: c1.insertNodes(false, list); 06: 07: function checkDndCopy(nodes, target){ 08: dojo.forEach(nodes, function(node){ alert(node.id); } ); 09: } 10: dojo.subscribe("/dnd/drop", function(){ 11: var mgr = dojo.dnd.manager(); 12: checkDndCopy(mgr.nodes, mgr.target); 13: }); The nodes inserted to the c1 at line 05 have id of "dojoUnique1, donoUnique2, dojoUnique3". On a event of drag and drop a node from c1 to c2, a onDndDrop event is fired and the subscribe method defined in line10-13 is invoked. I expected that newly copied node appears in the nodes (for example) at line 08. But this is not true. When dojoUnique1 is target of drag and drop, nodes at line 08 contains only dojoUnique1. I want to modify some attributes of newly copied nodes on the event of onDndDrop. Please let me know how such a thing is realized.

  Read the article

• XSLT; parse escaped text to a node-set and extract subelements

  - by Tom W

  Hello SO; I've been fighting with this problem all day and am just about at my wit's end. I have an XML file in which certain portions of data are stored as escaped text but are themselves well-formed XML. I want to convert the whole hierarchy in this text node to a node-set and extract the data therein. No combination of variables and functions I can think of works. The way I'd expect it to work would be: <xsl:variable name="a" select="InnerXML"> <xsl:for-each select="exsl:node-set($a)/*"> 'do something </xsl:for-each> The input element InnerXML contains text of the form <root><element a>text</element a><element b><element c/><element d>text</element d></element b></root> but that doesn't really matter. I just want to navigate the xml like a normal node-set. Where am I going wrong?

  Read the article

• Why does my root filesystem keep becoming read-only?

  - by Scott Severance

  I've lately been having an issue with my root filesystem becoming readonly. It happens some amount of time after boot. I don't know exactly when it happens, as I don't usually notice it until something such as suspending the computer or printing fails. It seems to be fairly random. Since most of my system is on that partition, I can't re-mount it without rebooting. After this happens, the system runs a fsck. Sometimes it prompts to fix problems; other times it apparently finds none. To troubleshoot, I've searched through the logs but found nothing relevant. This might be due in part to not knowing when the actual errors took place. The filesystem is apparently good to begin with, as when fsck runs its fixes it doesn't report any errors. I've scanned the disk with SpinRite. A while ago, SpinRite found and recovered from some bad sectors on the hard drive. I ran a level 4 scan (a thorough scan) after this probem appeared, but SpinRite found nothing. The SMART data reports that the disk is OK with 63 bad sectors. The number of bad sectors hasn't changed recently. I realize that the disk isn't in the best of conditions, and I have complete backups in case of catastrophic failure. Yet the lack of errors in the logs, combined with SpinRite's test results and the unchanged SMART data makes me think that this problem has some cause other than disk failure. Other than disk failure, what could cause my symptoms?

  Read the article

• Cocos2d-x Spritebatch node animation appears to be broken? cocos2d-x 2.0.3

  - by George Host

  Hi I have spent aprox 2 days trying to get this to work doing a google searches left and right and I did get it working except for sprite batch nodes. So in my class I am able to load kuwalio_stand.png and I tested kuwalio_walk1.png and 2 and 3 from the FrameCache(). They work for sure 100%. I run this code and it does not animate does anyone else have the same issue with sprite batch nodes? cocos2d::CCSprite * player = Player::create(); player->setPosition(cocos2d::CCPointMake(0.0f,0.0f)); player->setDisplayFrame(cocos2d::CCSpriteFrameCache::sharedSpriteFrameCache()->spriteFrameByName("kuwalio_stand.png")); player->setTag(PlayerTag); cocos2d::CCAnimation * walk = cocos2d::CCAnimation::create(); cocos2d::CCSpriteFrame * walk1 = cocos2d::CCSpriteFrameCache::sharedSpriteFrameCache()->spriteFrameByName("kuwalio_walk1"); cocos2d::CCSpriteFrame * walk2 = cocos2d::CCSpriteFrameCache::sharedSpriteFrameCache()->spriteFrameByName("kuwalio_walk2"); cocos2d::CCSpriteFrame * walk3 = cocos2d::CCSpriteFrameCache::sharedSpriteFrameCache()->spriteFrameByName("kuwalio_walk3"); walk->addSpriteFrame(walk1); walk->addSpriteFrame(walk2); walk->addSpriteFrame(walk3); cocos2d::CCAnimate * actionWalk = cocos2d::CCAnimate::create(walk); cocos2d::CCRepeatForever * actionRepeat = cocos2d::CCRepeatForever::create(actionWalk); walk->setDelayPerUnit(0.1f); actionWalk->setDuration(10.1f); this->runAction(actionRepeat); // Change camera to a soft follow camera. this->runAction(cocos2d::CCFollow::create(player)); mSceneSpriteBatchNode->addChild(player); // Have the CCNode object run its virtual update function as fast as possible. // Every frame for this layer. this-scheduleUpdate(); Counter example without the sprite batch node... cocos2d::CCSprite * sprite = cocos2d::CCSprite::create("kuwalio_walk1.png"); this->addChild(sprite,0); sprite->setPosition(cocos2d::CCPointMake(60,60)); sprite->retain(); cocos2d::CCAnimation * actionAnimation = cocos2d::CCAnimation::create(); actionAnimation->setDelayPerUnit(0.01f); actionAnimation->retain(); actionAnimation->addSpriteFrameWithFileName("kuwalio_walk1.png"); actionAnimation->addSpriteFrameWithFileName("kuwalio_walk2.png"); actionAnimation->addSpriteFrameWithFileName("kuwalio_walk3.png"); cocos2d::CCAnimate * a = cocos2d::CCAnimate::create(actionAnimation); a->setDuration(0.10f); cocos2d::CCRepeatForever * actionRepeat = cocos2d::CCRepeatForever::create(a); sprite->runAction(actionRepeat);

  Read the article

• How to get httrack to work with SSL on mac os x? (libssl.so not found)

  - by cwd

  I'm trying to use httrack website copier but the program is running and reporting "no-ssl" (ie: it does not have the capability to copy secure sites). From looking over this thread, it seems that the problem is either when I make & configure the program, or when I run the program, it is not finding the lib-ssl / open-ssl that I have installed. I think it is looking for /var/root/lib/libssl.so.1.0 The user on that forum states that he created a symlink which allowed httrack to find the ssl library in the non-default location. Perhaps that's what I need to do - but where do I create the link from and to? I'm not seeing that I have any libssl.so files installed on my system. Do I need the development package? If so, how do I install that? I used macports to install the current version of openssl that I have. I'm running OS X 10.6. Reserch I have run this command to try and debug: dtruss httrack 2&1 | grep ssl and that outputs this: stat64("libssl.so.1.0\0", 0x7FFF5FBFEE30, 0x7FFF5FBFF470) = -1 Err#2 stat64("/var/root/lib/libssl.so.1.0\0", 0x7FFF5FBFF210, 0x7FFF5FBFF470) = -1 Err#2 stat64("/usr/local/lib/libssl.so.1.0\0", 0x7FFF5FBFF210, 0x7FFF5FBFF470) = -1 Err#2 stat64("/usr/lib/libssl.so.1.0\0", 0x7FFF5FBFF220, 0x7FFF5FBFF470) = -1 Err#2 stat64("libssl.so.1\0", 0x7FFF5FBFEE30, 0x7FFF5FBFF470) = -1 Err#2 stat64("/var/root/lib/libssl.so.1\0", 0x7FFF5FBFF220, 0x7FFF5FBFF470) = -1 Err#2 stat64("/usr/local/lib/libssl.so.1\0", 0x7FFF5FBFF220, 0x7FFF5FBFF470) = -1 Err#2 stat64("/usr/lib/libssl.so.1\0", 0x7FFF5FBFF220, 0x7FFF5FBFF470) = -1 Err#2 stat64("libssl.so.1.0.0\0", 0x7FFF5FBFEE30, 0x7FFF5FBFF470) = -1 Err#2 stat64("/var/root/lib/libssl.so.1.0.0\0", 0x7FFF5FBFF210, 0x7FFF5FBFF470) = -1 Err#2 stat64("/usr/local/lib/libssl.so.1.0.0\0", 0x7FFF5FBFF210, 0x7FFF5FBFF470) = -1 Err#2 stat64("/usr/lib/libssl.so.1.0.0\0", 0x7FFF5FBFF220, 0x7FFF5FBFF470) = -1 Err#2 stat64("libssl.so.0\0", 0x7FFF5FBFEE30, 0x7FFF5FBFF470) = -1 Err#2 stat64("/var/root/lib/libssl.so.0\0", 0x7FFF5FBFF220, 0x7FFF5FBFF470) = -1 Err#2 stat64("/usr/local/lib/libssl.so.0\0", 0x7FFF5FBFF220, 0x7FFF5FBFF470) = -1 Err#2 stat64("/usr/lib/libssl.so.0\0", 0x7FFF5FBFF220, 0x7FFF5FBFF470) = -1 Err#2 stat64("libssl.so.0.9\0", 0x7FFF5FBFEE30, 0x7FFF5FBFF470) = -1 Err#2 stat64("/var/root/lib/libssl.so.0.9\0", 0x7FFF5FBFF210, 0x7FFF5FBFF470) = -1 Err#2 stat64("/usr/local/lib/libssl.so.0.9\0", 0x7FFF5FBFF210, 0x7FFF5FBFF470) = -1 Err#2 stat64("/usr/lib/libssl.so.0.9\0", 0x7FFF5FBFF220, 0x7FFF5FBFF470) = -1 Err#2 stat64("libssl.so.0.9.8p\0", 0x7FFF5FBFEE30, 0x7FFF5FBFF470) = -1 Err#2 stat64("/var/root/lib/libssl.so.0.9.8p\0", 0x7FFF5FBFF210, 0x7FFF5FBFF470) = -1 Err#2 stat64("/usr/local/lib/libssl.so.0.9.8p\0", 0x7FFF5FBFF210, 0x7FFF5FBFF470) = -1 Err#2 stat64("/usr/lib/libssl.so.0.9.8p\0", 0x7FFF5FBFF220, 0x7FFF5FBFF470) = -1 Err#2 stat64("libssl.so.0.9.8o\0", 0x7FFF5FBFEE30, 0x7FFF5FBFF470) = -1 Err#2 stat64("/var/root/lib/libssl.so.0.9.8o\0", 0x7FFF5FBFF210, 0x7FFF5FBFF470) = -1 Err#2 stat64("/usr/local/lib/libssl.so.0.9.8o\0", 0x7FFF5FBFF210, 0x7FFF5FBFF470) = -1 Err#2 stat64("/usr/lib/libssl.so.0.9.8o\0", 0x7FFF5FBFF220, 0x7FFF5FBFF470) = -1 Err#2 stat64("libssl.so.0.9.8n\0", 0x7FFF5FBFEE30, 0x7FFF5FBFF470) = -1 Err#2 stat64("/var/root/lib/libssl.so.0.9.8n\0", 0x7FFF5FBFF210, 0x7FFF5FBFF470) = -1 Err#2 stat64("/usr/local/lib/libssl.so.0.9.8n\0", 0x7FFF5FBFF210, 0x7FFF5FBFF470) = -1 Err#2 stat64("/usr/lib/libssl.so.0.9.8n\0", 0x7FFF5FBFF220, 0x7FFF5FBFF470) = -1 Err#2 stat64("libssl.so.0.9.8m\0", 0x7FFF5FBFEE30, 0x7FFF5FBFF470) = -1 Err#2 stat64("/var/root/lib/libssl.so.0.9.8m\0", 0x7FFF5FBFF210, 0x7FFF5FBFF470) = -1 Err#2 stat64("/usr/local/lib/libssl.so.0.9.8m\0", 0x7FFF5FBFF210, 0x7FFF5FBFF470) = -1 Err#2 stat64("/usr/lib/libssl.so.0.9.8m\0", 0x7FFF5FBFF220, 0x7FFF5FBFF470) = -1 Err#2 stat64("libssl.so.0.9.8l\0", 0x7FFF5FBFEE30, 0x7FFF5FBFF470) = -1 Err#2 stat64("/var/root/lib/libssl.so.0.9.8l\0", 0x7FFF5FBFF210, 0x7FFF5FBFF470) = -1 Err#2 stat64("/usr/local/lib/libssl.so.0.9.8l\0", 0x7FFF5FBFF210, 0x7FFF5FBFF470) = -1 Err#2 stat64("/usr/lib/libssl.so.0.9.8l\0", 0x7FFF5FBFF220, 0x7FFF5FBFF470) = -1 Err#2 stat64("libssl.so.0.9.8k\0", 0x7FFF5FBFEE30, 0x7FFF5FBFF470) = -1 Err#2 stat64("/var/root/lib/libssl.so.0.9.8k\0", 0x7FFF5FBFF210, 0x7FFF5FBFF470) = -1 Err#2 stat64("/usr/local/lib/libssl.so.0.9.8k\0", 0x7FFF5FBFF210, 0x7FFF5FBFF470) = -1 Err#2 stat64("/usr/lib/libssl.so.0.9.8k\0", 0x7FFF5FBFF220, 0x7FFF5FBFF470) = -1 Err#2 stat64("libssl.so.0.9.8j\0", 0x7FFF5FBFEE30, 0x7FFF5FBFF470) = -1 Err#2 stat64("/var/root/lib/libssl.so.0.9.8j\0", 0x7FFF5FBFF210, 0x7FFF5FBFF470) = -1 Err#2 stat64("/usr/local/lib/libssl.so.0.9.8j\0", 0x7FFF5FBFF210, 0x7FFF5FBFF470) = -1 Err#2 stat64("/usr/lib/libssl.so.0.9.8j\0", 0x7FFF5FBFF220, 0x7FFF5FBFF470) = -1 Err#2 stat64("libssl.so.0.9.8g\0", 0x7FFF5FBFEE30, 0x7FFF5FBFF470) = -1 Err#2 stat64("/var/root/lib/libssl.so.0.9.8g\0", 0x7FFF5FBFF210, 0x7FFF5FBFF470) = -1 Err#2 stat64("/usr/local/lib/libssl.so.0.9.8g\0", 0x7FFF5FBFF210, 0x7FFF5FBFF470) = -1 Err#2 stat64("/usr/lib/libssl.so.0.9.8g\0", 0x7FFF5FBFF220, 0x7FFF5FBFF470) = -1 Err#2 stat64("libssl.so.0.9.8b\0", 0x7FFF5FBFEE30, 0x7FFF5FBFF470) = -1 Err#2 stat64("/var/root/lib/libssl.so.0.9.8b\0", 0x7FFF5FBFF210, 0x7FFF5FBFF470) = -1 Err#2 stat64("/usr/local/lib/libssl.so.0.9.8b\0", 0x7FFF5FBFF210, 0x7FFF5FBFF470) = -1 Err#2 stat64("/usr/lib/libssl.so.0.9.8b\0", 0x7FFF5FBFF220, 0x7FFF5FBFF470) = -1 Err#2 stat64("libssl.so.0.9.8\0", 0x7FFF5FBFEE30, 0x7FFF5FBFF470) = -1 Err#2 stat64("/var/root/lib/libssl.so.0.9.8\0", 0x7FFF5FBFF210, 0x7FFF5FBFF470) = -1 Err#2 stat64("/usr/local/lib/libssl.so.0.9.8\0", 0x7FFF5FBFF210, 0x7FFF5FBFF470) = -1 Err#2 stat64("/usr/lib/libssl.so.0.9.8\0", 0x7FFF5FBFF220, 0x7FFF5FBFF470) = -1 Err#2 stat64("libssl.so.0.9.7\0", 0x7FFF5FBFEE30, 0x7FFF5FBFF470) = -1 Err#2 stat64("/var/root/lib/libssl.so.0.9.7\0", 0x7FFF5FBFF210, 0x7FFF5FBFF470) = -1 Err#2 stat64("/usr/local/lib/libssl.so.0.9.7\0", 0x7FFF5FBFF210, 0x7FFF5FBFF470) = -1 Err#2 stat64("/usr/lib/libssl.so.0.9.7\0", 0x7FFF5FBFF220, 0x7FFF5FBFF470) = -1 Err#2 stat64("libssl.so.0.9.6\0", 0x7FFF5FBFEE30, 0x7FFF5FBFF470) = -1 Err#2 stat64("/var/root/lib/libssl.so.0.9.6\0", 0x7FFF5FBFF210, 0x7FFF5FBFF470) = -1 Err#2 stat64("/usr/local/lib/libssl.so.0.9.6\0", 0x7FFF5FBFF210, 0x7FFF5FBFF470) = -1 Err#2 stat64("/usr/lib/libssl.so.0.9.6\0", 0x7FFF5FBFF220, 0x7FFF5FBFF470) = -1 Err#2 stat64("libssl.so\0", 0x7FFF5FBFEE30, 0x7FFF5FBFF470) = -1 Err#2 stat64("/var/root/lib/libssl.so\0", 0x7FFF5FBFF220, 0x7FFF5FBFF470) = -1 Err#2 stat64("/usr/local/lib/libssl.so\0", 0x7FFF5FBFF220, 0x7FFF5FBFF470) = -1 Err#2 stat64("/usr/lib/libssl.so\0", 0x7FFF5FBFF220, 0x7FFF5FBFF470) = -1 Err#2 I have already used mac ports to install open-ssl: port installed The following ports are currently installed: beecrypt @4.2.1_2 (active) cpio @2.10_0 (active) expat @2.0.1_1 (active) flex @2.5.35_0 (active) gettext @0.18.1.1_2 (active) gperf @3.0.4_0 (active) icu @4.6_0 (active) libiconv @1.13.1_0 (active) mysql5 @5.1.53_0 (active) ncurses @5.9_0 (active) ncursesw @5.8_0 (active) neon @0.29.5_0 (active) openssl @1.0.0c_0 (active) perl5.8 @5.8.9_3 (active) popt @1.16_0 (active) python24 @2.4.6_7 (active) readline @6.1.002_0 (active) rpm @4.4.9_10 (active) sqlite3 @3.7.3_0 (active) zlib @1.2.5_0 (active) Here are the install locations: locate libssl /opt/local/lib/libssl.1.0.0.dylib /opt/local/lib/libssl.a /opt/local/lib/libssl.dylib /opt/local/lib/pkgconfig/libssl.pc /opt/local/var/macports/software/openssl/1.0.0c_0/opt/local/lib/libssl.1.0.0.dylib /opt/local/var/macports/software/openssl/1.0.0c_0/opt/local/lib/libssl.a /opt/local/var/macports/software/openssl/1.0.0c_0/opt/local/lib/libssl.dylib /opt/local/var/macports/software/openssl/1.0.0c_0/opt/local/lib/pkgconfig/libssl.pc /usr/lib/libssl.0.9.7.dylib /usr/lib/libssl.0.9.8.dylib /usr/lib/libssl.0.9.dylib /usr/lib/libssl.dylib /usr/lib/pkgconfig/libssl.pc What should I do next? More Info I tried the solution below: $ DYLD_INSERT_LIBRARIES="/opt/local/lib/libssl.1.0.0.dylib" httrack Welcome to HTTrack Website Copier (Offline Browser) 3.44-1-nossl Copyright (C) Xavier Roche and other contributors To see the option list, enter a blank line or try httrack --help It is still not able to load the ssl lib: 3.44-1-nossl

  Read the article

• Inode to device information

  - by Methos

  I have 3 questions: I want to figure out if a file belongs to a USB device given the file inode. By looking in the latest kernel sources (2.6.33) on LXR, I think one can find that information by following pointers as follows: inode-super_block-block_device-backing_dev_info-device-device_driver(or device_type). However, the kernel that I am working with - 2.6.22.14 - does not have struct device pointer in the backing_dev_info object. So how can I figure out to which device does a file belong to from just the inode? I see that each of the inode, super_block and block_device contain an object of type 'dev_t'. But even after searching a lot, I could not find out how to convert 'dev_t' into struct device *. Is there any way to get that infomation? I tried to print device major and minor numbers using imajor(inode) and iminor(inode). However, for every file - belonging to hdd or usb - it always prints major and minor number as zero. Why would that be happening? I searched online for USB major numbers and I found out that major number for a USB is 180. However, on multiple machines, it showed me the major number associated with the USB dev as 253. $ ls -ltr /dev/usb* crw-rw---- 1 root root 253, 4 2010-04-13 17:20 /dev/usbmon4 crw-rw---- 1 root root 253, 3 2010-04-13 17:20 /dev/usbmon3 crw-rw---- 1 root root 253, 8 2010-04-13 17:20 /dev/usbmon8 crw-rw---- 1 root root 253, 5 2010-04-13 17:20 /dev/usbmon5 crw-rw---- 1 root root 253, 1 2010-04-13 17:20 /dev/usbmon1 crw-rw---- 1 root root 253, 7 2010-04-13 17:20 /dev/usbmon7 Why is that so?

  Read the article

• heap sort function explanation needed

  - by Codeguru

  Hello, Can someone clearly explain me how these functions of heap sort are working?? void heapSort(int numbers[], int array_size) { int i, temp; for (i = (array_size / 2)-1; i >= 0; i--) siftDown(numbers, i, array_size); for (i = array_size-1; i >= 1; i--) { temp = numbers[0]; numbers[0] = numbers[i]; numbers[i] = temp; siftDown(numbers, 0, i-1); } } void siftDown(int numbers[], int root, int bottom) { int done, maxChild, temp; done = 0; while ((root*2 <= bottom) && (!done)) { if (root*2 == bottom) maxChild = root * 2; else if (numbers[root * 2] > numbers[root * 2 + 1]) maxChild = root * 2; else maxChild = root * 2 + 1; if (numbers[root] < numbers[maxChild]) { temp = numbers[root]; numbers[root] = numbers[maxChild]; numbers[maxChild] = temp; root = maxChild; } else done = 1; } }

  Read the article

• compact XSLT code to drop N number of tags if all are null.

  - by infant programmer

  This is my input xml: <root> <node1/> <node2/> <node3/> <node4/> <othertags/> </root> The output must be: <root> <othertags/> </root> if any of the 4 nodes isn't null then none of the tags must be dropped. example: <root> <node1/> <node2/> <node3/> <node4>sample_text</node4> <othertags/> </root> Then the output must be same as input xml. <root> <node1/> <node2/> <node3/> <node4>sample_text</node4> <othertags/> </root> This is the XSL code I have designed :: <xsl:template match="@*|node()"> <xsl:copy> <xsl:apply-templates select="@*|node()"/> </xsl:copy> </xsl:template> <xsl:template match="/root/node1[.='' and ../node2/.='' and ../node3/.='' and ../node4/.=''] |/root/node2[.='' and ../node1/.='' and ../node3/.='' and ../node4/.=''] |/root/node3[.='' and ../node1/.='' and ../node2/.='' and ../node4/.=''] |/root/node4[.='' and ../node1/.='' and ../node2/.='' and ../node3/.='']"/> As you can see the code requires more effort and becomes more bulky as the number of nodes increase. Is there any alternative way to overcome this bottleneck?

  Read the article

• Is there a way to tell SGE to run specific jobs as root on the execution node?

  - by Rick Reynolds

  The title kinda says it all... We're using SGE/OGE to submit jobs to a set of worker nodes that then do things with specific pieces of equipment. The programs and scripts that have been created that manipulate this equipment rely on running as root. I'd like SGE to handle allocation of resources in a way that is mindful of users, groups, projects, etc., but I also need the actual jobs to run with root permissions. I've read up on How can one run a prologue script as root in gridengine? to see if anything there was pertinent, but it seems that SGE is providing the "user@" kind of spec specifically for prolog and epilog kinds of actions. Is there any similar functionality for the job itself? I'm aware of su/sudo approaches, but that won't really work in this environment because the sudoers file isn't globally managed (i.e. I'd have to add a whole set of users to /etc/sudoers on lots of machines). I'm currently looking into a setuid kind of solution, but that would definitely be an unnecessary kind of work-around if SGE provides me a way to declare that a specific job (or jobs in a specific queue) always needs to run with a specific user's rights.

  Read the article

• How to balance the root domain using NS records?

  - by Patrick McCurley

  I have two load balancers that balance incoming traffic across multiple data centers. These work fine. I can test them out by doing an 'nslookup mydomain.com xIP' I have now taken out DNS services with DYN.com to allow me to manage the DNS Zone file so that typing mydomain.com will ask my load balancers what the IP address is to resolve. Step 1 : the NS record for www. I set up A records (glue) for ns1 & ns2, then the corresponding NS record to delegate the DNS lookup to the balancers instead of DYN.com's nameservers. ns1.mydomain.com A [ip address of load balancer 1] ns2.mydomain.com A [ip address of load balancer 1] www.mydomain.com NS ns1.mydomain.com www.mydomain.com NS ns2.mydomain.com All is well - when I type www.mydomain.com, the requests get delegated to my load balancers who provide the IP address of the endpoint and the connect is made successfully. Step 2 : the NS record for root. This is where I run into problems. I need customers to be able to type 'mydomain.com' (without the www) and ALSO get delegated to the load balancers for the IP address. However - of the research I have done, and through the DYN control panel, it seems to be not allowed to provide an NS record for the root - as this overrides the default NS servers. How can i delegate both the root, and the www. to my load balancers?

  Read the article

• MySQL Cluster ndb_mgmd error

  - by Patryk

  I set up MySQL Cluster on Ubuntu. My ndb_mgmd.cnf file looked: [NDBD DEFAULT] NoOfReplicas=2 DataDir= /var/lib/mysql-cluster # Management Node [NDB_MGMD] NodeId=1 HostName=192.168.204.20 DataDir=/var/lib/mysql-cluster # Storage Nodes (one for each node) [NDBD] NodeId=2 HostName=192.168.204.25 DataDir=/var/lib/mysql-cluster [NDBD] NodeId=3 HostName=192.168.204.26 DataDir=/var/lib/mysql-cluster # SQL Nodes (one for each node) [MYSQLD] NodeId=4 HostName=192.168.204.30 Now I want to edit this configuration, so I changed this file: [NDBD DEFAULT] NoOfReplicas=2 DataDir= /var/lib/mysql-cluster # Management Node [NDB_MGMD] NodeId=1 HostName=192.168.204.20 DataDir=/var/lib/mysql-cluster # Storage Nodes (one for each node) [NDBD] NodeId=2 HostName=192.168.204.25 DataDir=/var/lib/mysql-cluster [NDBD] NodeId=3 HostName=192.168.204.26 DataDir=/var/lib/mysql-cluster # SQL Nodes (one for each node) [MYSQLD] NodeId=4 HostName=192.168.204.25 [MYSQLD] NodeId=5 HostName=192.168.204.26 But ndb_mgm > show; still shows: Connected to Management Server at: localhost:1186 Cluster Configuration --------------------- [ndbd(NDB)] 2 node(s) id=2 (not connected, accepting connect from 192.168.204.25) id=3 (not connected, accepting connect from 192.168.204.26) [ndb_mgmd(MGM)] 1 node(s) id=1 @192.168.204.20 (mysql-5.1.51 ndb-7.1.9) [mysqld(API)] 1 node(s) id=4 (not connected, accepting connect from 192.168.204.30) I tried: sudo /etc/init.d/mysql-ndb-mgm restart sudo ndb_mgmd --initial sudo ndb_mgmd -f /etc/mysql/ndb_mgmd.cnf And nothing works. Any help?

  Read the article

• Big Data – Buzz Words: What is MapReduce – Day 7 of 21

  - by Pinal Dave

  In yesterday’s blog post we learned what is Hadoop. In this article we will take a quick look at one of the four most important buzz words which goes around Big Data – MapReduce. What is MapReduce? MapReduce was designed by Google as a programming model for processing large data sets with a parallel, distributed algorithm on a cluster. Though, MapReduce was originally Google proprietary technology, it has been quite a generalized term in the recent time. MapReduce comprises a Map() and Reduce() procedures. Procedure Map() performance filtering and sorting operation on data where as procedure Reduce() performs a summary operation of the data. This model is based on modified concepts of the map and reduce functions commonly available in functional programing. The library where procedure Map() and Reduce() belongs is written in many different languages. The most popular free implementation of MapReduce is Apache Hadoop which we will explore tomorrow. Advantages of MapReduce Procedures The MapReduce Framework usually contains distributed servers and it runs various tasks in parallel to each other. There are various components which manages the communications between various nodes of the data and provides the high availability and fault tolerance. Programs written in MapReduce functional styles are automatically parallelized and executed on commodity machines. The MapReduce Framework takes care of the details of partitioning the data and executing the processes on distributed server on run time. During this process if there is any disaster the framework provides high availability and other available modes take care of the responsibility of the failed node. As you can clearly see more this entire MapReduce Frameworks provides much more than just Map() and Reduce() procedures; it provides scalability and fault tolerance as well. A typical implementation of the MapReduce Framework processes many petabytes of data and thousands of the processing machines. How do MapReduce Framework Works? A typical MapReduce Framework contains petabytes of the data and thousands of the nodes. Here is the basic explanation of the MapReduce Procedures which uses this massive commodity of the servers. Map() Procedure There is always a master node in this infrastructure which takes an input. Right after taking input master node divides it into smaller sub-inputs or sub-problems. These sub-problems are distributed to worker nodes. A worker node later processes them and does necessary analysis. Once the worker node completes the process with this sub-problem it returns it back to master node. Reduce() Procedure All the worker nodes return the answer to the sub-problem assigned to them to master node. The master node collects the answer and once again aggregate that in the form of the answer to the original big problem which was assigned master node. The MapReduce Framework does the above Map () and Reduce () procedure in the parallel and independent to each other. All the Map() procedures can run parallel to each other and once each worker node had completed their task they can send it back to master code to compile it with a single answer. This particular procedure can be very effective when it is implemented on a very large amount of data (Big Data). The MapReduce Framework has five different steps: Preparing Map() Input Executing User Provided Map() Code Shuffle Map Output to Reduce Processor Executing User Provided Reduce Code Producing the Final Output Here is the Dataflow of MapReduce Framework: Input Reader Map Function Partition Function Compare Function Reduce Function Output Writer In a future blog post of this 31 day series we will explore various components of MapReduce in Detail. MapReduce in a Single Statement MapReduce is equivalent to SELECT and GROUP BY of a relational database for a very large database. Tomorrow In tomorrow’s blog post we will discuss Buzz Word – HDFS. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Big Data, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL

  Read the article

• How do you preseed an ssh key?

  - by Wes Felter

  I tried this: d-i preseed/late_command string mkdir -p /target/root/.ssh d-i preseed/late_command string cp /cdrom/id_rsa.pub /target/root/.ssh/authorized_keys d-i preseed/late_command string chmod -R go-rwx /target/root/.ssh (I'm using a USB installer and I put id_rsa.pub in the root directory of the USB drive.) The /root/.ssh directory is not created and the installer complains that the chmod command failed (not surprising if the directory doesn't exist).

  Read the article

• Anyone have experience with Silicon Mechanics 4-Node Machines?

  - by Matt Simmons

  I'm taking a look at buying some new servers (small infrastructure, 2 racks, etc), and although I like a lot of the features in blades, I'm looking at the price point for Silicon Mechanics' 4-node machines. http://www.siliconmechanics.com/i27091/xeon-2U-4-Node.php It's a bit like a mini-blade enclosure, but has no shared resources, except for the redundant power supplies. A single point of management would be great, but for the low price point here, I'm possibly willing to give that up, if the server quality is adequate. Basically, have you used these machines? Any problems? Anything you like?

  Read the article

• Can I add myself to group `root'?

  - by kev

  $ id uid=1000(kev) gid=1000(kev) groups=1000(kev),4(adm),24(cdrom),27(sudo),30(dip),46(plugdev),109(lpadmin),124(sambashare) $ ls -l /etc/sudoers -r--r----- 1 root root 723 Jan 31 2012 /etc/sudoers $ sudo adduser kev root Adding user `kev' to group `root' ... Adding user kev to group root Done. $ cat /etc/sudoers cat: /etc/sudoers: Permission denied After adding myself(kev) to group root, I still cannot read /etc/sudoers. I don't know why. Thanks for your help.

  Read the article

• What is the rationale behind snazzy Window Managers/Composers?

  - by Emanuele

  This is more of a generic question, based on trying out Window Managers like Awesome, Mate and others. To me looks like that other Window Managers like Gnome3 and/or Unity are heavy and pointless. I do understand that having all the composed UIs is more pleasant for the eye, but apart that, what are the other major benefits? To make an example, when I run the game Heroes of Newerth (using nVidia drivers) under: Unity : the FPS drops sharply Gnome3 : FPS is ok, but X and other processes use 15~20% of CPU and quite some additional memory Awesome : FPS is ok, and other processes use very little memory and CPU Below some numbers regarding what I'm saying (please note my system is 64 bit, AMD Phenom II X4, 8 GB RAM, nd nVidia 470 GTX, SSD disk). All data is sorted by mem usage (watch -d -n 10 "ps -e -o pcpu,pmem,pid,user,cmd --sort=-pmem | head -20"); again note that CPU time of ./hon-x86_64 might be different due to the fact I can't take the snapshot of the system during exactly same time. Awesome: %CPU %MEM PID USER CMD 91.8 21.6 3579 ema ./hon-x86_64 2.4 0.9 3223 root /usr/bin/X :0 -auth /var/run/lightdm/root/:0 -nolisten tcp vt7 -novtswitch 1.6 0.4 2600 ema /usr/lib/erlang/erts-5.8.5/bin/beam.smp -Bd -K true -A 4 -- -root /usr/lib/erlang -progname erl -- -home /home/ema -- -noshell -noinp 0.3 0.2 3602 ema gnome-terminal 0.0 0.2 2698 ema /usr/bin/python /usr/lib/desktopcouch/desktopcouch-service Gnome3: %CPU %MEM PID USER CMD 82.7 21.0 5528 ema ./hon-x86_64 17.7 1.7 5315 ema /usr/bin/gnome-shell 5.8 1.2 5062 root /usr/bin/X :0 -auth /var/run/lightdm/root/:0 -nolisten tcp vt7 -novtswitch 1.0 0.4 5657 ema /usr/bin/python /usr/lib/ubuntuone-client/ubuntuone-syncdaemon 0.7 0.3 5331 ema nautilus -n 1.6 0.3 2600 ema /usr/lib/erlang/erts-5.8.5/bin/beam.smp -Bd -K true -A 4 -- -root /usr/lib/erlang -progname erl -- -home /home/ema -- - 0.9 0.2 5451 ema gnome-terminal 0.1 0.2 5400 ema /usr/bin/python /usr/lib/desktopcouch/desktopcouch-service Unity 3D: %CPU %MEM PID USER CMD 87.2 21.1 6554 ema ./hon-x86_64 10.7 2.6 6105 ema compiz 17.8 1.1 5842 root /usr/bin/X :0 -auth /var/run/lightdm/root/:0 -nolisten tcp vt7 -novtswitch 1.3 0.9 6672 root /usr/bin/python /usr/sbin/aptd 0.4 0.4 6606 ema /usr/bin/python /usr/lib/ubuntuone-client/ubuntuone-syncdaemon 0.5 0.3 6115 ema nautilus -n 1.5 0.3 2600 ema /usr/lib/erlang/erts-5.8.5/bin/beam.smp -Bd -K true -A 4 -- -root /usr/lib/erlang -progname erl -- -home /home/ema -- -noshell -noinput -sasl errl 0.3 0.2 6180 ema /usr/lib/unity/unity-panel-service So my point is, what's the rationale behind going towards such heavy WMs/Composers?

  Read the article

• Why is my dual-boot Ubuntu partition showing up as a peripheral "root.disk"?

  - by Don

  I recently installed Ubuntu 12.04, which I had been booting from a usb key, as a dual-boot on my machine running Windows 7. From what I had read online while researching, I was prepared to have to shrink the Windows partition and all that. But I never had to - it really was just a few clicks here and there and it was installed. I'm still pretty confused about it, but whatever, it worked, and the two peacefully coexist on my machine, and I have broken things to fix before I worry about fixing unbroken things. So yesterday I got it in my head to look at my partitions (I was considering making an all new partition to install the Windows 8 Release Preview). What I saw confused me. Here's a screenshot of the disk utility. At this moment, there is nothing connected to my computer, and nothing in any of the optical drives/ports/card readers/etc. Can you help me figure out what's going on here? Don's Machine is, I believe, my Windows partition - that's the name I assigned my machine from Windows Explorer. PQSERVICE is from what I can find online also Windows, but having to do with backup. And SYSTEM REQUIRED, if I browse it in Ubuntu, is definitely something to do with booting, and I believe it is also Windows'. According to the sizes shown, those three together should use up my 500 GB HD. Then further down, as a "peripheral device", it lists that 31 GB disk. This is obviously my Ubuntu (Model:Linux Loop:root.disk), but why is it showing up as a peripheral? So, to sum up those questions and to add some more random ones I had: Why is Ubuntu showing up as a peripheral device? If the Windows sections take up all 500 GB, where does Ubuntu live? If I renamed the disk partitions, would my life become a nightmare (seriously - can I safely rename them)? Why didn't I have to resize the Windows partition in the first place? Would giving Ubuntu more space improve its performance (it hangs alot)? Is it possible to have a partition for each OS (Windows 7 & 8, Ubuntu), a partition for files, and a separate partition for backups? Is this towards the good or bad idea end of the spectrum? @Elfy, would that explain why it keeps hanging? I guess I'll backup my files, rip it out, and reinstall it correctly later on today.

  Read the article

• How to access an node of an LAN via WAN?

  - by gilzero

  Lets say I have a router that is connected to the Internet. An WAN IP address is given by ISP. It is using PPPoE ADSL, the IP address is not static, every time it connected, assigned a different IP address. There is an web server 192.168.0.100 running in the LAN. I heard something like DMZ + DynDNS can do the job? But not sure what these are and how they work. Any there way(s) to access the local node 192.168.0.100 via WAN, so that I can reach that node even I am not home. Thanks for any advice.

  Read the article

• Mounting hard-drive on boot

  - by Kicsi Mano

  I had 2 HDD, today I bought a new one, I would like to mount this HDD at boot, it's working, but the new HDD mounted under robu not root, why? Content of the fstab: UUID=8e492a04-c05d-4861-b996-a36ebbaf3d43 /media/WESYS_RAID ext4 rw 0 0 UUID=12C81F25C81F071F /media/WESYS_DATA ntfs defaults,iocharset=utf8 0 0 /dev/mapper/WeSyS_LVM /media/WESYS_LVM ext4 rw 0 0 This is the rights. drwxrwxrwx 1 root root 4096 2012-04-05 11:51 WESYS_DATA drwxr-xr-x 9 root root 4096 2012-03-01 10:11 WESYS_LVM drwx------ 3 robu robu 4096 2012-04-10 12:33 WESYS_RAID

  Read the article

• How to extend a file definition from an existing module in the node?

  - by c33s

  I use an older version of the example42 mysql module, which defines the mysql.conf file but not its content. Mmy goal is to just include the mysql module and add a content definition in the node. class mysql { ... file { "mysql.conf": path => "${mysql::params::configfile}", mode => "${mysql::params::configfile_mode}", owner => "${mysql::params::configfile_owner}", group => "${mysql::params::configfile_group}", ensure => present, require => Package["mysql"], notify => Service["mysql"], } ... } node xyz { include mysql File["mysql.conf"] { content => template("mymodule/mysql.conf.erb")} } The above code produces a "Only subclasses can override parameters" What is the correct way to just add a content definition to an existing file definition?

  Read the article

• How can I hide the SiteMapPath root node on home page?

  - by Jamie Ide

  How can I hide the root node in a SiteMapPath control when the user is on the root node page? For example, my breadcrumb trail on a child page is: Home Products Hammers Ball Peen which is fine. But when the user is on the Home page, the SiteMapPath control displays Home which is useless clutter. I want to suppress displaying Home (the root node) when the user is on the home page. I have the SiteMapPath control in a master page. Also, I'm handling SiteMapResolve to set the querystrings in the nodes.

  Read the article

• How to select all parents of a node in a hierarchical mysql table?

  - by Ehsan Khodarahmi

  I have a MySQL table that represents data for a tree GUI component, here's the structure of my table: treeTable ( id INT NOT NULL PRIMARY KEY, parentId INT, name VARCHAR(255) ); parentId is a self-referencing foreign key. Now I want to write a stored procedure which gets a node id and returns a result set that contains that node and all of its parents. For example, suppose that my table has filled with this data: 1, null, 'root' 2, 1 , 'level_1' 3, 2 , 'level_2' Now I want to get all parent nodes of node 3 (nodes 1 and 2) and return a result set that contains all tree records. Can anybody help me please?

  Read the article

• How to convert a DOM node list to an array in Javascript?

  - by Guss

  I have a Javascript function that accepts a list of HTML nodes, but it expects a Javascript array (it runs some Array methods on that) and I want to feed it the output of Document.getElementsByTagName that returns a DOM node list. Initially I thought of using something simple like: Array.prototype.slice.call(list,0) And that works fine in all browsers, except of course Internet Explorer which returns the error "JScript object expected", as apparently the DOM node list returned by Document.getElement* methods is not a JScript object enough to be the target of a function call. Caveats: I don't mind writing Internet Explorer specific code, but I'm not allowed to use any Javascript libraries such as JQuery because I'm writing a widget to be embedded into 3rd party web site, and I cannot load external libraries that will create conflict for the clients. My last ditch effort is to iterate over the DOM node list and create an array myself, but is there a nicer way to do that?

  Read the article

• How to Validate an XML Node against an XSD in C++?

  - by Ashish

  Hi Please note that I'm asking for validation against a particular node and not the whole file. For examples <somexmldoc> <someNode> <UserDefinedNode> </> <UserDefinedNode> </> </someNode> </somexmldoc> For this XML doc, I have an wholeDoc.XSD which could be used to validate the whole document except "UserDefinedNode" (This node is specified with "any" tag in xsd, which allows a user to define anything under that node). Is it possible to have a separate userdefined.XSD file to validate "UserDefinedNode"? Is it possible to use MSXML for C++ (IXMLDomDocument) to validate this? Thanks!

  Read the article

< Previous Page | 89 90 91 92 93 94 95 96 97 98 99 100  | Next Page >