Search Results

Search found 2440 results on 98 pages for 'vmware'.

Page 96/98 | < Previous Page | 92 93 94 95 96 97 98  | Next Page >

• SQL Server suddenly using only a small portion of CPU.

  - by hermiod

  We've got a Windows 2008 R2 server running SQL Server 2008. All of a sudden, the SQLServer process is refusing to go above 20% CPU usage. As of last week, when running a heavy query against the db it would rise to 100% usage as I would expect. We've had this server for a while and it seems strange that it would just suddenly have this limit. This limit is causing our queries to take a lot longer than they normally would. No one has (knowingly at least) made any changes to the server configuration. After a bit of investigation, I discovered the sys.dm_os_sys_memory view. This shows 'available physical memory is high' bu at the same time the available physical memory is 339552kb where as the total is 4193848kb. It is worth noting that this is a virtual server running on vmware. Is there a setting somewhere with in SQL Server that sets the maximum CPU usage? I've found the settings in resource governor, although this is currently off as it always has been. We have recently started using Spotlight for SQL Server by Quest Software. It's playback database was located on this server for a short time this morning, I first noticed the problem shortly afterwards, although I hadn't been doing any queries prior to this so I don't know if this is the point at which the problem began, however the database was working as expected on Friday afternoon. The Windows log shows that the following settings were applied to the SpotlightPlaybackDatabase when it was created. 02/21/2011 08:45:02,spid60,Unknown,Setting database option TORN_PAGE_DETECTION to ON for database SpotlightPlaybackDatabase. 02/21/2011 08:45:02,spid60,Unknown,Setting database option MULTI_USER to ON for database SpotlightPlaybackDatabase. 02/21/2011 08:45:02,spid60,Unknown,Setting database option READ_WRITE to ON for database SpotlightPlaybackDatabase. 02/21/2011 08:45:02,spid60,Unknown,Setting database option AUTO_UPDATE_STATISTICS to ON for database SpotlightPlaybackDatabase. 02/21/2011 08:45:02,spid60,Unknown,Setting database option AUTO_CREATE_STATISTICS to ON for database SpotlightPlaybackDatabase. 02/21/2011 08:45:02,spid60,Unknown,Setting database option ANSI_WARNINGS to OFF for database SpotlightPlaybackDatabase. 02/21/2011 08:45:02,spid60,Unknown,Setting database option CONCAT_NULL_YIELDS_NULL to ON for database SpotlightPlaybackDatabase. 02/21/2011 08:45:02,spid60,Unknown,Setting database option RECOVERY to SIMPLE for database SpotlightPlaybackDatabase. 02/21/2011 08:45:02,spid60,Unknown,Setting database option QUOTED_IDENTIFIER to OFF for database SpotlightPlaybackDatabase. 02/21/2011 08:45:02,spid60,Unknown,Setting database option AUTO_CLOSE to OFF for database SpotlightPlaybackDatabase. Could any of these settings changes modified the settings applied to the whole server?

  Read the article

• Which hardware to VM ratio for Build-Server virtualization?

  - by Martin

  Let's start with saying that I'm a total noob wrt. to server virtualization. That is, I use VMs often during development, but they're simple desktop machine things for me. Now to my problem: We have two (physical) build servers, one master, one slave running Jenkins to do daily tasks and build (Visual C++ Builds) our release packages for our software. As such these machines are critical to our company, because we do lot's releases and without a controlled environment to create them, we can't ship fixes. (And currently there's no proper backup of these machines in place, because they do not hold any data as such - it just would be a major pain to setup them again should they go bust. (But setting up backup that I'd know would work in case of HW failure would even be more pain, so we have skipped that until now.)) Therefore (and for scaling purposes) we would like to go virtual with these machines. Outsourcing to the cloud is not an option, not at all, so we'll have to use on-premises hardware and VM hosts. Each Build-Server (master or slave) is a fully configured (installs, licenses, shares in case of the master, ...) Windows Server box. I would now ideally like to just convert the (two) existing physical nodes to VM images and run them. Later add more VM slave instances as clones of the existing ones. And here begin my questions: Should I go for one VM per one hardware-box or should I go for something where a single hardware runs multiple VMs? That would mean a single point of failure hardware wise and doesn't seem like a good idea ... or?? Since we're doing C++ compilation with Visual Studio, I assume that during a build the hardware (processor cores + disk) will be fully utilized, so going with more than one build-node per hardware doesn't seem to make much sense?? Wrt. to hardware options, does it make any difference which VM software we use (VMWare, MS, Virtualbox, ... ?) (We're using Windows exclusively for our builds.) Regarding budget: We have a normal small company (20 developers) budget for this. ;-) That is, if it's going to cost a few k$ it's going to cost. If it's free - the better. I strongly prefer solutions where there's no multi-k$ maintenance costs per year.

  Read the article

• Ubuntu + SSL ports + AVAST

  - by jurajvt

  I have an interesting problem with communication via standard SSL ports. Fresh installed Ubuntu 14.04 server + Postfix + Dovecot, SASL authentication provided by Dovecot, self-signed certificate generated trough the Dovecot script mkcert.sh. Redirected ports on ZyWALL USG 200. I can send and receive e-mails from outside with standard ports 25 and 110, but not over 587. I am connecting to my server from machine with Windows 8.1 + VMWare Player + Ubuntu 14.04 Desktop + ssh. On Windows host I have installed Avast! antivirus. When I am trying to telnet from virtual machine to server over 587, it refused connection. But when I turn on Avast! it let me in to message Connected to... Same with nmap. When Avast! is turned on it is show me all SSL ports. When I turned it off, only standard ports appeared. OpenSSL shows me CONNECTED(00000003). But outside virtual machine directly in Windows 8.1 using nmap with zenmap there are not opened SSL ports in both Avast! states. From other external linux machines are problems with touching SSL ports same - refused. I have turned on submission in master.cf and 587 port is correctly listening on 0.0.0.0 in process master.pid which belongs to Postfix. I can telnet, or nmap over port 587 to my domain directly from server. Other ports like 995, 993 are OK on localhost, too. It is true, that I can't send emails via 587 anyway (Avast! turned on/off), but I can see ports opened. It is possible, that I have simply bad certificate and Avast! has right one, so with turned it on I can see opened ports? EDIT: To be more clear, I can't see or using port 587 everywhere from outside (tried Thunderbird, telnet, openssl, nmap, putty, swaks; both from Linux or Windows machines) and that is my problem. It was only by chance that I saw opened ports when Avast! is turned on.

  Read the article

• What server setup for a small web development company? [closed]

  - by Giordano

  I co-own a company with a friend of mine and we have decided to buy a new server to support our business (our current server is an Asus EEE Box, working great but too limited :) ). I should mention that we are web developers but occasionally we do small-office sys admin. Thus, 99% of time we work on GNU/Linux (mainly Ubuntu) but from time to time we need to setup a Windows environment to assist some customers (e.g. setup a temporary SQL Server 2008). Our requirements: Low budget: we don't want the cheapest solution out there but we can't afford to spend too much. Budget could be ~1000-1500€ (before VAT) Robustness: we would like to setup a RAID array and maybe have an external disk where we can store backups Virtualization: we need to be able to setup few servers for development. The scenario is something like this (~8 appliances running in parallel): Redmine + GIT server Bacula server FTP server 3-4 virtual appliances that could be set up on demand to test our applications or support a customer. The appliances could be: LAMP, Tomcat+PostgreSQL, SQL Server Support: if something breaks down it shouldn't be too difficult to find a replacement. Now, given the main requirements, there are some doubts we need to clarify: Do you suggest to buy a prepackaged solution (for example a customized Dell PowerEdge T110 or T310) or to assemble the server by ourselves (buy the separate components)? What RAID configuration do you suggest? I was thinking of RAID1 (probably cheaper) or RAID5. should we buy a hardware RAID controller or is it ok to use a software RAID (mdadm)? In case, which controller do you suggest? What processor do you suggest (Intel Xeon, i3, i5, i7, AMD)? How much RAM? (I was thinking at least 8GB, ~1GB per appliance) What virtualization software do you recommend? VMWare seems to be the best choice, but what about XEN or KVM? We don't want to buy licenses at the moment so we would like to consider only free options. What OS do you recommend? We know Ubuntu, Debian, Gentoo very well (we would like to use Ubuntu Server), however it seems a lot of people goes for CentOS. Thanks in advance if you can help us with this! It's our first "serious" server so many doubts popped up :) Please feel free to add further recommendations if you have some to share ;) Have a nice day

  Read the article

• Install XP Mode with VirtualBox Using the VMLite Plugin

  - by Mysticgeek

  Would you like to run XP Mode, but prefer Sun’s VirtualBox for virtualization?  Thanks to the free VMLite plugin, you can quickly and easily run XP Mode in or alongside VirtualBox. Yesterday we showed you one method to install XP Mode in VirtualBox, unfortunately in that situation you lose XP’s activation, and it isn’t possible to reactivate it. Today we show you a tried and true method for running XP mode in VirtualBox and integrating it seamlessly with Windows 7. Note: You need to have Windows 7 Professional or above to use XP Mode in this manner. Install XP Mode Make sure you’re logged in with Administrator rights for the entire process. The first thing you’ll want to do is install XP Mode on your system (link below). You don’t need to install Windows Virtual PC. Go through and install XP Mode using the defaults. Install VirtualBox Next you’ll need to install VirtualBox 3.1.2 or higher if it isn’t installed already. If you have an older version of VirtualBox installed, make sure to update it. During setup you’re notified that your network connection will be reset. Check the box next to Always trust software from “Sun Microsystems, Inc.” then click Install.   Setup only takes a couple of minutes, and does not require a reboot…which is always nice. Install VMLite XP Mode Plugin The next thing we’ll need to install is the VMLite XP Mode Plugin. Again Installation is simple following the install wizard. During the install like with VirtualBox you’ll be asked to install the device software. After it’s installed go to the Start menu and run VMLite Wizard as Administrator. Select the location of the XP Mode Package which by default should be in C:\Program Files\Windows XP Mode. Accept the EULA…and notice that it’s meant for Windows 7 Professional, Enterprise, and Ultimate editions. Next, name the machine, choose the install folder, and type in a password. Select if you want Automatic Updates turned on or not. Wait while the process completes then click Finish.   The VMLite XP Mode will set up to run the first time. That is all there is to this section. You can run XP Mode from within the VMLite Workstation right away. XP Mode is fully activated already, and the Guest Additions are already installed, so there’s nothing else you need to do!  XP Mode is the whole way ready to use. Integration with VirtualBox Since we installed the VMLite Plugin, when you open VirtualBox you’ll see it listed as one of your machines and you can start it up from here.   Here we see VMLite XP Mode running in Sun VirtualBox. Integrate with Windows 7 To integrate it with Windows 7 click on Machine \ Seamless Mode…   Here you can see the XP menu and Taskbar will be placed on top of Windows 7. From here you can access what you need from XP Mode.   Here we see XP running on Virtual Box in Seamless Mode. We have the old XP WordPad sitting next to the new Windows 7 version of WordPad. This works so seamlessly you forget if your working in XP or Windows 7. In this example we have Windows Home Server Console running in Windows 7, while installing MSE from IE 6 in XP Mode. At the top of the screen you will still have access to the VMs controls.   You can click the button to exit Seamless Mode, or simply hit the right “CTRL+L” Conclusion This is a very slick way to run XP Mode in VirtualBox on any machine that doesn’t have Hardware Virtualization. This method also doesn’t lose the XP Mode activation and is actually extremely easy to set up. If you prefer VMware (like we do), Check out how to run XP Mode on machines without Hardware Virtualization capability, and also how to create an XP Mode for Vista and Windows 7 Home Premium. Links Download XP Mode Download VirtualBox Download VMLite XP Mode Plugin for VirtualBox (Site Registration Required) Similar Articles Productive Geek Tips Search for Install Packages from the Ubuntu Command LineHow To Run XP Mode in VirtualBox on Windows 7 (sort of)Install and Use the VLC Media Player on Ubuntu LinuxInstall Monodevelop on Ubuntu LinuxInstall Flash Plugin Manually in Firefox on Vista TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Enable Check Box Selection in Windows 7 OnlineOCR – Free OCR Service Betting on the Blind Side, a Vanity Fair article 30 Minimal Logo Designs that Say More with Less LEGO Digital Designer – Free Create a Personal Website Quickly using Flavors.me

  Read the article

• Install XP Mode with VirtualBox Using the VMLite Plugin

  - by Mysticgeek

  Would you like to run XP Mode, but prefer Sun’s VirtualBox for virtualization?  Thanks to the free VMLite plugin, you can quickly and easily run XP Mode in or alongside VirtualBox. Yesterday we showed you one method to install XP Mode in VirtualBox, unfortunately in that situation you lose XP’s activation, and it isn’t possible to reactivate it. Today we show you a tried and true method for running XP mode in VirtualBox and integrating it seamlessly with Windows 7. Note: You need to have Windows 7 Professional or above to use XP Mode in this manner. Install XP Mode Make sure you’re logged in with Administrator rights for the entire process. The first thing you’ll want to do is install XP Mode on your system (link below). You don’t need to install Windows Virtual PC. Go through and install XP Mode using the defaults. Install VirtualBox Next you’ll need to install VirtualBox 3.1.2 or higher if it isn’t installed already. If you have an older version of VirtualBox installed, make sure to update it. During setup you’re notified that your network connection will be reset. Check the box next to Always trust software from “Sun Microsystems, Inc.” then click Install.   Setup only takes a couple of minutes, and does not require a reboot…which is always nice. Install VMLite XP Mode Plugin The next thing we’ll need to install is the VMLite XP Mode Plugin. Again Installation is simple following the install wizard. During the install like with VirtualBox you’ll be asked to install the device software. After it’s installed go to the Start menu and run VMLite Wizard as Administrator. Select the location of the XP Mode Package which by default should be in C:\Program Files\Windows XP Mode. Accept the EULA…and notice that it’s meant for Windows 7 Professional, Enterprise, and Ultimate editions. Next, name the machine, choose the install folder, and type in a password. Select if you want Automatic Updates turned on or not. Wait while the process completes then click Finish.   The VMLite XP Mode will set up to run the first time. That is all there is to this section. You can run XP Mode from within the VMLite Workstation right away. XP Mode is fully activated already, and the Guest Additions are already installed, so there’s nothing else you need to do!  XP Mode is the whole way ready to use. Integration with VirtualBox Since we installed the VMLite Plugin, when you open VirtualBox you’ll see it listed as one of your machines and you can start it up from here.   Here we see VMLite XP Mode running in Sun VirtualBox. Integrate with Windows 7 To integrate it with Windows 7 click on Machine \ Seamless Mode…   Here you can see the XP menu and Taskbar will be placed on top of Windows 7. From here you can access what you need from XP Mode.   Here we see XP running on Virtual Box in Seamless Mode. We have the old XP WordPad sitting next to the new Windows 7 version of WordPad. This works so seamlessly you forget if your working in XP or Windows 7. In this example we have Windows Home Server Console running in Windows 7, while installing MSE from IE 6 in XP Mode. At the top of the screen you will still have access to the VMs controls.   You can click the button to exit Seamless Mode, or simply hit the right “CTRL+L” Conclusion This is a very slick way to run XP Mode in VirtualBox on any machine that doesn’t have Hardware Virtualization. This method also doesn’t lose the XP Mode activation and is actually extremely easy to set up. If you prefer VMware (like we do), Check out how to run XP Mode on machines without Hardware Virtualization capability, and also how to create an XP Mode for Vista and Windows 7 Home Premium. Links Download XP Mode Download VirtualBox Download VMLite XP Mode Plugin for VirtualBox (Site Registration Required) Similar Articles Productive Geek Tips Search for Install Packages from the Ubuntu Command LineHow To Run XP Mode in VirtualBox on Windows 7 (sort of)Install and Use the VLC Media Player on Ubuntu LinuxInstall Monodevelop on Ubuntu LinuxInstall Flash Plugin Manually in Firefox on Vista TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Enable Check Box Selection in Windows 7 OnlineOCR – Free OCR Service Betting on the Blind Side, a Vanity Fair article 30 Minimal Logo Designs that Say More with Less LEGO Digital Designer – Free Create a Personal Website Quickly using Flavors.me

  Read the article

• How to Create Auto Playlists in Windows Media Player 12

  - by DigitalGeekery

  Are you getting tired of the same old playlists in Windows Media Player? Today we’ll show you how to create dynamic auto playlists based on criteria you choose in WMP 12 in Windows 7. Auto Playlists In Library view, click on Create playlist dropdown arrow and select Create auto playlist. On the New Auto Playlist window type in a name for the playlist in the text box. Now we need to choose our criteria by which to filter your playlist. Select Click here to add criteria. For our example, we will create a playlist of songs that were added to the library in the last week from the Alternative genre. So, we will first select Date Added from the dropdown list. Many criteria will have addition options to configure. In the example below you will see that we have a few options to fine tune.   We will filter all the songs added to the library in the last 7 days. We will select Is After from the first dropdown list. Then select Last 7 Days from the second dropdown list. You can add multiple criteria to further filter your playlist. If you can’t find the criteria you are looking for, select “More” at the bottom of the dropdown list.   This will pull up a filter window with all the criteria. Select a filter and then click OK when finished.   From the Genre dropdown, we will select Alternative. If you’d like to add Pictures, Videos, or TV Shows to your auto playlists you can do so by selecting them from the dropdown list under And also include. You will then be able to select criteria for your pictures, videos, or TV shows from the dropdown list.   Finally, you can also add restrictions to your music such as the number of items, duration, or total size. We will limit the duration of our playlist to one hour by selecting Limit Total Duration To… Then type in 1 hour…Click OK.   Our library is automatically filtered and a playlist is created based on the criteria we selected. When additional songs are added to the Windows Media Player library, any of new songs that fit the criteria will automatically be added to the New Songs playlist. You can also save a copy of an auto playlist as a regular playlist. Switch to Playlists view by clicking Playlists from either the top menu or the navigation bar. Select the Play tab and then click Clear list to remove any tracks from the list pane.   Right-click on the playlist you want to save, select Add to, and then Play list. The songs from your auto playlist will appear as an Unsaved list on the list pane. Click Save list. Type in a name for your playlist. Your auto playlist will continue to change as you add or remove items from your Media Player library that meet the criteria you established. The new saved playlist we just created will stay as it is currently. Editing a Auto playlist is easy. Right-click on the playlist and select Edit. Now you are ready to enjoy your playlist. Conclusion Auto playlists are great way to keep your playlists fresh in Windows Media Player 12. Users can get creative and experiment with the wide variety of criteria to customize their listening experience. If you are new to playlists in Windows Media Player, you may want to check our our previous post on how to create custom playlists in Windows Media Player 12. Are you looking to get better sound from WMP 12? Take a look at how to improve playback using enhancements in Windows Media Player 12. Similar Articles Productive Geek Tips Create Custom Playlists in Windows Media Player 12Fixing When Windows Media Player Library Won’t Let You Add FilesInstall and Use the VLC Media Player on Ubuntu LinuxMake Windows Media Player Automatically Open in Mini Player ModeMake VLC Player Look like Windows Media Player 10 TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips VMware Workstation 7 Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Error Goblin Explains Windows Error Codes Twelve must-have Google Chrome plugins Cool Looking Skins for Windows Media Player 12 Move the Mouse Pointer With Your Face Movement Using eViacam Boot Windows Faster With Boot Performance Diagnostics Create Ringtones For Your Android Phone With RingDroid

  Read the article

• Add Zune Desktop Player to Windows 7 Media Center

  - by DigitalGeekery

  Are you a Zune owner who prefers the Zune player for media playback? Today we’ll show you how to integrate the Zune player with WMC using Media Center Studio. You’ll need to download Media Center Studio and the Zune Desktop player software. (See download links below) Also, make sure you have Media Center closed. Some of the actions in Media Center Studio cannot be performed while WMC is open. Open Media Center Studio and click on the Start Menu tab at the top of the application.   Click the Application button. Here we will create an Entry Point for the Zune player so that we can add it to Media Center. Type in a name for your entry point in the title text box. This is the name that will appear under the tile when added to the Media Center start menu. Next, type in the path to the Zune player. By default this should be C:\Program Files\Zune\Zune.exe. Note: Be sure to use the original path, not a link to the desktop icon.   The Active image is the image that will appear on the tile in Media Center. If you wish to change the default image, click the Browse button and select a different image. Select Stop the currently playing media from the When launched do the following: dropdown list.  Otherwise, if you open Zune player from WMC while playing another form of media, that media will continue to play in the background.   Now we will choose a keystroke to use to exit the Zune player software and return to Media Center. Click on the the green plus (+) button. When prompted, press a key to use to the close the Zune player. Note: This may also work with your Media Center remote. You may want to set a keyboard keystroke as well as a button on your remote to close the program. You may not be able to set certain remote buttons to close the application. We found that the back arrow button worked well. You can also choose a keystroke to kill the program if desired. Be sure to save your work before exiting by clicking the Save button on the Home tab.   Next, select the Start Menu tab and click on the next to Entry points to reveal the available entry points. Find the Zune player tile in the Entry points area. We want to drag the tile out onto one of the menu strips on the start menu. We will drag ours onto the Extras Library strip. When you begin to drag the tile, green plus (+) signs will appear in between the tiles. When you’ve dragged the tile over any of the green plus signs, the  red “Move” label will turn to a blue “Move to” label. Now you can drop the tile into position. Save your changes and then close Media Center Studio. When you open Media Center, you should see your Zune tile on the start menu. When you select the Zune tile in WMC, Media Center will be minimized and Zune player will be launched. Now you can enjoy your media through the Zune player. When you close Zune player with the previously assigned keystroke or by clicking the “X” at the top right, Windows Media Center will be re-opened. Conclusion We found the Zune player worked with two different Media Center remotes that we tested. It was a times a little tricky at times to tell where you were when navigating through the Zune software with a remote, but it did work. In addition to managing your music, the Zune player is a nice way to add podcasts to your Media Center setup. We should also mention that you don’t need to actually own a Zune to install and use the Zune player software. Media Center Studio works on both Vista and Windows 7. We covered Media Center Studio a bit more in depth in a previous post on customizing the Windows Media Center start menu. Are you new to Zune player? Familiarize yourself a bit more by checking out some of our earlier posts like how to update your Zune player, and experiencing your music a whole new way with Zune for PC.   Downloads Zune Desktop Player download Media Center Studio download Similar Articles Productive Geek Tips How To Rip a Music CD in Windows 7 Media CenterIntegrate Hulu Desktop and Windows Media Center in Windows 7Using Netflix Watchnow in Windows Vista Media Center (Gmedia)Fixing When Windows Media Player Library Won’t Let You Add FilesBuilt-in Quick Launch Hotkeys in Windows Vista TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips VMware Workstation 7 Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Bypass Waiting Time On Customer Service Calls With Lucyphone MELTUP – "The Beginning Of US Currency Crisis And Hyperinflation" Enable or Disable the Task Manager Using TaskMgrED Explorer++ is a Worthy Windows Explorer Alternative Error Goblin Explains Windows Error Codes Twelve must-have Google Chrome plugins

  Read the article

• Add Background Images and Themes to Windows 7 Media Center

  - by DigitalGeekery

  Are you tired of the same Windows Media Center look and feel? Today we’ll show you how change the background and apply themes to WMC. Changing the Basic Color Scheme in WMC There are a couple of very basic color scheme options built in to Windows 7 Media Center. From the WMC Start Menu, select Settings on the Tasks strip and then select General. On the General settings screen select Visual and Sound Effects.   Under Color scheme you’ll find options for Windows Media Center standard, High contrast white, and High contrast black. Simply select a color scheme and click Save before exiting.   If you have used Media Center before you are familiar with the standard blue default theme. There is also the high contrast white. And, the high contrast black. Changing the Background Image with Media Center Studio Themes and custom backgrounds need to be added with the third-party software, Media Center Studio. You can find the download link at the end of this article. You can use your own high resolution photo, or download one from the Internet. For best results, you’ll want to find an image that meets or exceeds the resolution of your monitor. Also, using a darker colored background image is ideal as it should contrast better with the lighter colored text of the start menu. Once you’ve downloaded and installed Media Center Studio (link below), open the application select the Home tab on the ribbon and make sure you are on the Themes tab below. Click New. Select Biography from the left pane and type in a name for your new theme.   Next, click on the triangle next to Images to expand the list below. You’ll want to browse to Images > Common > Background. You should see a list of PNG image files located below Background. We will want to swap out the COMMON.ANIMATED.BACKGROUND.PNG and the COMMON.BACKGROUND.PNG images. Select COMMON.ANIMATED.BACKGROUND.PNG and click on the Browse button on the right.   Browse for your photo and click Open. Your selected image will appear on the left pane. Now, do the same for the COMMON.BACKGROUND.PNG. When finished, select the Home tab on the ribbon at the top and click Save.   Now switch to the Themes tab on the ribbon and the Themes tab below. (There are two Themes tabs which can be a bit confusing). Select your theme on the right pane and click Apply. Note: You won’t see the image backgrounds displayed. Your theme will be applied to Media Center. Close out of Media Center Studio and open Windows Media Center to check out your new background.   You can load multiple backgrounds images and switch them periodically as your mood changes. You might like to find a nice background featuring your favorite movie or TV show.   Perhaps you can even find a background of your favorite sports team.   Installing Themes with Media Center Studio Theme7MC has made available a small group of Media Center Studio Theme packs that are simple to download and install. You can find the download link below. Note: Before installing a theme, turn off any extenders and close Windows Media Center. Download any (or all) of the Theme7MC theme packages to your Media Center PC. Open Media Center Studio, select the Themes tab (the one at the top) and click Import Theme.   Browse for the theme you wish to import and click Open. Select your theme from the themes pane and click Apply. Media Center Studio will proceed to apply your theme. You should then see your new theme appear under Current theme on the left theme pane. Close out of Media Center Studio. Open Media Center and enjoy your new theme. Conclusion Media Center Studio runs on Windows 7 or Vista and gives users a solution for personalizing their Media Center backgrounds. It is a Beta application, however, so it still has a few bugs. Currently, there are only a handful of themes available at Themes7MC, but what they have is pretty slick. If you’d like to further customize the look of Media Center, check out our previous article on how to customize the Media Center start menu with Media Center Studio. Downloads Media Center Studio Theme7MC Similar Articles Productive Geek Tips Using Netflix Watchnow in Windows Vista Media Center (Gmedia)How To Rip a Music CD in Windows 7 Media CenterAutomatically Mount and View ISO files in Windows 7 Media CenterSchedule Updates for Windows Media CenterIntegrate Hulu Desktop and Windows Media Center in Windows 7 TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 VMware Workstation 7 Acronis Online Backup AceStock, a Tiny Desktop Quote Monitor Gmail Button Addon (Firefox) Hyperwords addon (Firefox) Backup Outlook 2010 Daily Motivator (Firefox) FetchMp3 Can Download Videos & Convert Them to Mp3

  Read the article

• Test Drive Windows 7 Online with Virtual Labs

  - by Matthew Guay

  Did you miss out on the Windows 7 public beta and want to try it out before you actually make the leap and upgrade? Maybe you want to learn how to deploy new features in a business environment. Here’s how you can test drive Windows 7 directly from your browser. Whether you manage 10,000 desktops or simply manage your own laptop, it’s usually best to test out a new OS before installing it.  If you’re upgrading from Windows XP you may find many things unfamiliar.  Microsoft has setup a special Windows 7 Test Drive website with resources to help IT professionals test and deploy Windows 7 in their workplaces.  This is a great resource to try out Windows 7 from the comfort of your browser, and look at some of the new features without even installing it. Please note that the online version is not nearly as responsive as a full standard install of Windows 7.  It also does not run the full Aero interface or desktop effects, and may refresh slowly depending on your Internet connection.  So don’t judge Windows 7’s performance based on this virtual lab, but use it as a way to learn more about Windows 7 without installing it. Getting Started To test drive Windows 7, visit Microsoft’s Windows 7 Test Drive website (link below).  You will need to run the Windows 7 Test Drive in Internet Explorer, as it requires Active X support.  We received this error when attempting to run the Test Drive in Firefox: Now, click the “Take a Test Drive” link on the bottom left of the page. This site includes several test drives to demonstrate different features of Windows 7 and its related ecosystem of products including Windows Server 2008 R2, some of which, including the XP Mode test drive, are not yet ready.  For this test, we selected the MED-V Test drive, as this includes Office 2007 and 2010 so you can test them in Windows 7 as well.  Simply select the test drive you want, and click “Try it now!”   If you haven’t run a Windows test drive before, you will be asked to install an ActiveX control.  Click the link to install. Click the yellow bar at the top of the page in Internet Explorer, and select to Install the add-on.  You may have to approve a UAC prompt to finish the install. Once this is finished, click the link on the bottom of the page to return to your test drive.  The test drive page should automatically refresh; if it doesn’t, click refresh to reload it. Now the test drive will load the components.   Once its fully loaded, click the link to launch Windows 7 in a new window. You may see a prompt warning that the server may have been impersonated.  Simply click Yes to proceed. The test lab will give you some getting started directions; click Close Window when you’re ready to try out Windows 7. Here’s the default desktop in the Windows 7 test drive.  You can use it just like a normal Windows computer, but do note that it may function slowly depending on your internet connection.   This test drive includes both Office 2007 and Office 2010 Tech Preview, so you can try out both in Windows 7 as well. You can try out the new Windows 7 applications such as the reworked Paint with the Ribbon interface from Office. Or you can even test the newest version of Media Center, though it will warn you that it may not function good with the down-scaled graphics in the test drive.   Most importantly, you can try out the new features in Windows 7, such as Jumplists and even Aero Snap.  Once again, these features will not function the quickest, but it does let you test them out. While working with the Virtual Lab, there are different tasks it walks you through. You can also download a copy of the lab manual in PDF format to help you navigate through the various objectives. The test drive system is running Microsoft Forefront Security, the enterprise security solution from which Microsoft Security Essentials has adapted components from. Conclusion These virtual labs are great for tech students, or those of you who want to get a first-hand trial of the new features. Also, if you’re not sure on how to deploy something and want to practice in a virtual environment, these labs are quite valuable.While these labs are geared toward IT professionals, it’s a good way for anyone to try out Windows 7 features from the comfort of your current computer. Test Drive Windows 7 Similar Articles Productive Geek Tips Mount Multiple ISO Images Using Virtual CloneDriveHow To Delete a VHD in Windows 7Keyboard Shortcuts for VMware WorkstationMount an ISO image in Windows 7 or VistaHow To Turn a Physical Computer Into A Virtual Machine with Disk2vhd TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 If it were only this easy SyncToy syncs Files and Folders across Computers on a Network (or partitions on the same drive) Classic Cinema Online offers 100’s of OnDemand Movies OutSync will Sync Photos of your Friends on Facebook and Outlook Windows 7 Easter Theme YoWindoW, a real time weather screensaver

  Read the article

• Change the User Interface Language in Ubuntu

  - by Matthew Guay

  Would you like to use your Ubuntu computer in another language?  Here’s how you can easily change your interface language in Ubuntu. Ubuntu’s default install only includes a couple languages, but it makes it easy to find and add a new interface language to your computer.  To get started, open the System menu, select Administration, and then click Language Support. Ubuntu may ask if you want to update or add components to your current default language when you first open the dialog.  Click Install to go ahead and install the additional components, or you can click Remind Me Later to wait as these will be installed automatically when you add a new language. Now we’re ready to find and add an interface language to Ubuntu.  Click Install / Remove Languages to add the language you want. Find the language you want in the list, and click the check box to install it.  Ubuntu will show you all the components it will install for the language; this often includes spellchecking files for OpenOffice as well.  Once you’ve made your selection, click Apply Changes to install your new language.  Make sure you’re connected to the internet, as Ubuntu will have to download the additional components you’ve selected. Enter your system password when prompted, and then Ubuntu will download the needed languages files and install them.   Back in the main Language & Text dialog, we’re now ready to set our new language as default.  Find your new language in the list, and then click and drag it to the top of the list. Notice that Thai is the first language listed, and English is the second.  This will make Thai the default language for menus and windows in this account.  The tooltip reminds us that this setting does not effect system settings like currency or date formats. To change these, select the Text Tab and pick your new language from the drop-down menu.  You can preview the changes in the bottom Example box. The changes we just made will only affect this user account; the login screen and startup will not be affected.  If you wish to change the language in the startup and login screens also, click Apply System-Wide in both dialogs.  Other user accounts will still retain their original language settings; if you wish to change them, you must do it from those accounts. Once you have your new language settings all set, you’ll need to log out of your account and log back in to see your new interface language.  When you re-login, Ubuntu may ask you if you want to update your user folders’ names to your new language.  For example, here Ubuntu is asking if we want to change our folders to their Thai equivalents.  If you wish to do so, click Update or its equivalents in your language. Now your interface will be almost completely translated into your new language.  As you can see here, applications with generic names are translated to Thai but ones with specific names like Shutter keep their original name. Even the help dialogs are translated, which makes it easy for users around to world to get started with Ubuntu.  Once again, you may notice some things that are still in English, but almost everything is translated. Adding a new interface language doesn’t add the new language to your keyboard, so you’ll still need to set that up.  Check out our article on adding languages to your keyboard to get this setup. If you wish to revert to your original language or switch to another new language, simply repeat the above steps, this time dragging your original or new language to the top instead of the one you chose previously. Conclusion Ubuntu has a large number of supported interface languages to make it user-friendly to people around the globe.  And since you can set the language for each user account, it’s easy for multi-lingual individuals to share the same computer. Or, if you’re using Windows, check out our article on how you can Change the User Interface Language in Vista or Windows 7, too! Similar Articles Productive Geek Tips Restart the Ubuntu Gnome User Interface QuicklyChange the User Interface Language in Vista or Windows 7Create a Samba User on UbuntuInstall Samba Server on UbuntuSee Which Groups Your Linux User Belongs To TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips VMware Workstation 7 Acronis Online Backup DVDFab 6 Revo Uninstaller Pro FetchMp3 Can Download Videos & Convert Them to Mp3 Use Flixtime To Create Video Slideshows Creating a Password Reset Disk in Windows Bypass Waiting Time On Customer Service Calls With Lucyphone MELTUP – "The Beginning Of US Currency Crisis And Hyperinflation" Enable or Disable the Task Manager Using TaskMgrED

  Read the article

• Add Hotmail & Live Email Accounts to Outlook 2010

  - by Matthew Guay

  Microsoft has recently been promoting upcoming updates to their Hotmail service, promising to make it an even better webmail service. But Microsoft’s revamped Outlook 2010 is already here. Here’s how to integrate Hotmail with Outlook. Outlook 2010 works with a wide variety of email accounts, including POP3, IMAP, and Exchange accounts.  The only problem with POP3 and IMAP accounts is that they only sync email, but not your calendar and contacts like Exchange does.  Hotmail, however, lets you sync your email, contacts, and calendar with Outlook with the Hotmail Connector.  This lets you keep all of your PIM data accessible from everywhere.  Let’s look at how we can set this up on our account. Getting Started The easiest way to add Hotmail to Outlook is to first install the Outlook Hotmail Connector (link below).  Make sure Outlook is closed first, and then proceed with the installation as usual. If you enter your Hotmail account into the New Account setup in Outlook before installing the Hotmail Connector, Outlook will prompt you to download the Hotmail Connector.  However, you’ll have to exit Outlook before you can install the Connector, and then will have to re-enter your information when you restart Outlook, so it’s easier to just install it first. Add Your Hotmail Account to Outlook Now you’re ready to add your Hotmail account to Outlook.  If this is the first time you’ve run Outlook 2010, you’ll be greeted with the following screen.  Click Next to proceed with setup. Then select Yes and click Next again. If you’ve already got an email account setup in Outlook, you can add a new account by clicking File and then selecting Add account. Now, enter your Hotmail account information, and click Next. Outlook will search for your account settings and automatically setup your account with the Hotmail connector we previously installed. If you entered your password incorrectly previously, you may see the following popup.  Re-enter your password and click OK, and Outlook will re-verify your settings. Once everything’s finished and setup, you’ll see the following completion screen.  Click Finish to complete the setup and check out your Hotmail in Outlook. Welcome to your Hotmail account in Outlook 2010.  You’ll notice a small notification at the bottom of the window notifying you that you’re connected to Windows Live Hotmail.  Now your email will synchronize with your Hotmail account, and your Outlook calendar and contacts will be synced with your Live calendar and contacts, respectively.  This is the closest you can get to full Exchange without an Exchange account, and in our experience it works great.  In fact, Hotmail Sync seems to work faster than IMAP sync for us. Setup Hotmail With POP3 Access If you need to access your Hotmail email account but don’t want to install the Outlook Connector, then you can add it with POP3 sync.  We recommend going with the Outlook Connector for the best experience, but if you can’t install it (eg. you’re not allowed to install applications on your work PC) then this is a good alternative. To do this, follow our tutorial on setting up a Gmail POP3 account in Outlook. Although the article concentrates on Gmail, the settings are essentially the same. The only thing you’ll want to change is the Incoming and Outgoing mail server. Incoming mail server – pop3.live.com Outgoing mail server – smtp.live.com User name – your Hotmail or Live email address Incoming Server (POP3) – 995 Outgoing Server (SMTP) – 587 Also, check This server requires and encrypted connection Just as in the Gmail example, select TLS for the type of encrypted connection.  Then, on the bottom, make sure to uncheck the box to Remove messages from the server after a number of days.  This way your messages will still be accessible from your Hotmail account online. Conclusion Even though Hotmail is generally not as popular as Gmail, it works great with Outlook integration.  If you’re a heavy user of Windows Live services, or want to try them out, Outlook Connector is the easiest way to keep your desktop activity synced with the cloud.  If you’re just one of the millions of Hotmail users who want to access their old Hotmail account alongside their other accounts, this method works great for you too. If you’re using Outlook 2003 or 2007, check out our article on using Hotmail from Microsoft Outlook. Links Download Outlook Hotmail Connector 32-bit Download Outlook Hotmail Connector 64-bit – note, only for users of Office 2010 x64 Similar Articles Productive Geek Tips Use Hotmail from Microsoft OutlookHow to add any POP3 Email Account to HotmailHow to Send and Receive Hotmail from Your Gmail AccountAdd Your Gmail To Windows Live MailManage Your Windows Live Account in Google Chrome TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips VMware Workstation 7 Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Creating a Password Reset Disk in Windows Bypass Waiting Time On Customer Service Calls With Lucyphone MELTUP – "The Beginning Of US Currency Crisis And Hyperinflation" Enable or Disable the Task Manager Using TaskMgrED Explorer++ is a Worthy Windows Explorer Alternative Error Goblin Explains Windows Error Codes

  Read the article

• Protecting offline IRM rights and the error "Unable to Connect to Offline database"

  - by Simon Thorpe

  One of the most common problems I get asked about Oracle IRM is in relation to the error message "Unable to Connect to Offline database". This error message is a result of how Oracle IRM is protecting the cached rights on the local machine and if that cache has become invalid in anyway, this error is thrown. Offline rights and security First we need to understand how Oracle IRM handles offline use. The way it is implemented is one of the main reasons why Oracle IRM is the leading document security solution and demonstrates our methodology to ensure that solutions address both security and usability and puts the balance of these two in your control. Each classification has a set of predefined roles that the manager of the classification can assign to users. Each role has an offline period which determines the amount of time a user can access content without having to communicate with the IRM server. By default for the context model, which is the classification system that ships out of the box with Oracle IRM, the offline period for each role is 3 days. This is easily changed however and can be as low as under an hour to as long as years. It is also possible to switch off the ability to access content offline which can be useful when content is very sensitive and requires a tight leash. So when a user is online, transparently in the background, the Oracle IRM Desktop communicates with the server and updates the users rights and offline periods. This transparent synchronization period is determined by the server and communicated to all IRM Desktops and allows for users rights to be kept up to date without their intervention. This allows us to support some very important scenarios which are key to a successful IRM solution. A user doesn't have to make any decision when going offline, they simply unplug their laptop and they already have their offline periods synchronized to the maximum values. Any solution that requires a user to make a decision at the point of going offline isn't going to work because people forget to do this and will therefore be unable to legitimately access their content offline. If your rights change to REMOVE your access to content, this also happens in the background. This is very useful when someone has an offline duration of a week and they happen to make a connection to the internet 3 days into that offline period, the Oracle IRM Desktop detects this online state and automatically updates all rights for the user. This means the business risk is reduced when setting long offline periods, because of the daily transparent sync, you can reflect changes as soon as the user is online. Of course, if they choose not to come online at all during that week offline period, you cannot effect change, but you take that risk in giving the 7 day offline period in the first place. If you are added to a NEW classification during the day, this will automatically be synchronized without the user even having to open a piece of content secured against that classification. This is very important, consider the scenario where a senior executive downloads all their email but doesn't open any of it. Disconnects the laptop and then gets on a plane. During the flight they attempt to open a document attached to a downloaded email which has been secured against an IRM classification the user was not even aware they had access to. Because their new role in this classification was automatically synchronized their experience is a good one and the document opens. More information on how the Oracle IRM classification model works can be found in this article by Martin Abrahams. So what about problems accessing the offline rights database? So onto the core issue... when these rights are cached to your machine they are stored in an encrypted database. The encryption of this offline database is keyed to the instance of the installation of the IRM Desktop and the Windows user account. Why? Well what you do not want to happen is for someone to get their rights for content and then copy these files across hundreds of other machines, therefore getting access to sensitive content across many environments. The IRM server has a setting which controls how many times you can cache these rights on unique machines. This is because people typically access IRM content on more than one computer. Their work desktop, a laptop and often a home computer. So Oracle IRM allows for the usability of caching rights on more than one computer whilst retaining strong security over this cache. So what happens if these files are corrupted in someway? That's when you will see the error, Unable to Connect to Offline database. The most common instance of seeing this is when you are using virtual machines and copy them from one computer to the next. The virtual machine software, VMWare Workstation for example, makes changes to the unique information of that virtual machine and as such invalidates the offline database. How do you solve the problem? Resolution is however simple. You just delete all of the offline database files on the machine and they will be recreated with working encryption when the Oracle IRM Desktop next starts. However this does mean that the IRM server will think you have your rights cached to more than one computer and you will need to rerequest your rights, even though you are only going to be accessing them on one. Because it still thinks the old cache is valid. So be aware, it is good practice to increase the server limit from the default of 1 to say 3 or 4. This is done using the Enterprise Manager instance of IRM. So to delete these offline files I have a simple .bat file you can use; Download DeleteOfflineDBs.bat Note that this uses pskillto stop the irmBackground.exe from running. This is part of the IRM Desktop and holds open a lock to the offline database. Either kill this from task manager or use pskillas part of the script.

  Read the article

• Add Your Gmail Account to Outlook 2010 using POP

  - by Matthew Guay

  Are you excited about the latest version of Outlook, and want to get it setup with your Gmail accounts?  Here’s how you can easily add your Gmail account using POP to Outlook 2010. Getting Started Log into your Gmail account an go to your settings page. Under the Forwarding and POP/IMAP tab make sure POP is enabled.  You can choose to enable POP access for all new mail that arrives from now on, or for all mail in your Gmail account.  On the second option, we suggest you chose keep Gmail’s copy in the Inbox so you can still access your emails on the Gmail server.   Add Your Account to Outlook 2010 If you haven’t run Outlook 2010 yet, click Next to start setup and add your email account. Select Yes to add an email account to Outlook.  Now you’re ready to start entering your settings to access your email. Or, if you’ve already been using Outlook and want to add a new POP account, click File and then select Add Account under Account Information.   Outlook 2010 can often automatically find and configure your account with just your email address and password, so enter these and click Next to let Outlook try to set it up automatically. Outlook will now scan for the settings for your email account. If Outlook was able to find settings and configure your account automatically, you’ll see this success screen.  Depending on your setup, Gmail is automatically setup, but sometimes it fails to find the settings.  If this is the case, we’ll go back and manually configure it. Manually Configure Outlook for Gmail Back at the account setup screen, select Manually configure server settings or additional server types and click Next. Select Internet E-mail and then click Next. Enter your username, email address, and log in information. Under Server information enter in the following: Account Type: POP3 Incoming mail server: pop.gmail.com Outgoing mail server: smtp.gmail.com Make sure to check Remember password so you don’t have to enter it every time. After that data is entered in, click on the More Settings button. Select the Outgoing Server tab, and check My outgoing server (SMTP) requires authentication.  Verify Use same settings as my incoming mail server is marked as well. Next select the Advanced tab and enter the following information: Incoming Server (POP3): 995 Outgoing server (SMTP): 587 Check This server requires an encrypted connection (SSL) Set Use the following type of encrypted connection to TLS You also might want to uncheck the box to Remove messages from the server after a number of days.  This way your messages will still be accessible from Gmail online. Click OK to close the window, and then click Next to finish setting up the account.  Outlook will test your account settings to make sure everything will work; click Close when this is finished. Provided everything was entered in correctly, you’ll be greeted with a successful setup message…click Finish.   Gmail will be all ready to sync with Outlook 2010.  Enjoy your Gmail account in Outlook, complete with fast indexed searching, conversation view, and more! Conclusion Adding Gmail using the POP setting to Outlook 2010 is usually easy and only takes a few steps.  Even if you have to enter your settings manually, it is still a fairly simple process. You can add multiple email accounts using POP3 if you wish, and if you’d like to sync IMAP accounts, check out our tutorial on setting up Gmail using IMAP in Outlook 2010. Similar Articles Productive Geek Tips Add Your Gmail To Windows Live MailAdd Your Gmail Account to Outlook 2007Use Gmail IMAP in Microsoft Outlook 2007Figure out which Online accounts are selling your email to spammersAdd Your Gmail Account to Outlook 2010 Using IMAP TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips VMware Workstation 7 Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Bypass Waiting Time On Customer Service Calls With Lucyphone MELTUP – "The Beginning Of US Currency Crisis And Hyperinflation" Enable or Disable the Task Manager Using TaskMgrED Explorer++ is a Worthy Windows Explorer Alternative Error Goblin Explains Windows Error Codes Twelve must-have Google Chrome plugins

  Read the article

• Can't install wine (or ia32-libs) in Ubuntu 12.10 64 bit

  - by carestad

  As already pointed out here, people seems to have issues with installing wine in the latest version of Ubuntu. I'm suspecting this only happens with 64 bit users. For example, when trying to install wine, wine1.4, wine1.4:i386, wine1.5, wine1.5:i386, ia32-libs or ia32-libs:i386 with apt-get, I get a lot of dependency errors. Doing a sudo apt-get -f install doesn't seem to do the trick, neither does using aptitude. The errors I get is normally that the packages depend on some :i386 package, but installing those manually doesn't work either because they also have dependency issues (isn't APT supposed to do this automatically?!). I also downloaded CrossOver today and tried installing the .deb manually, but the dependency issues show up there as well. When running sudo apt-get -f install after trying to install the CrossOver .deb, apt-get wants to purge the following packages: ia32-crossover intel-gpu-tools libdrm-nouveau2 libgl1-mesa-dri libva-x11-1 ubuntu-desktop vlc xorg xserver-xorg-video-ati xserver-xorg-video-intel xserver-xorg-video-modesetting xserver-xorg-video-openchrome xserver-xorg-video-radeon xserver-xorg-video-vmware What I've tried so far (and didn't work): Installing synaptic, reloading my repositories, searching for ia32 and installing ia32-libs. Using Ubuntu Software Center to install Wine and ia32-libs. Using apt-get and aptitude to install all the differend varieties of the wine packages, both with and without the :i386 and -amd64 suffixes in package names. Disabling the universe and multiverse repos, run a sudo apt-get update and then re-enable them again. Boot a newly downloaded Ubuntu 12.10 x64 live USB and try to install all the different packages there. What I haven't tried (yet): Boot a newly downloaded Ubuntu 12.10 x32 image and try to install wine there (I'm just guessing that will work). Reinstall Ubuntu. Throw my computer out a window. wine alexander@cosmo:~$ LANGUAGE=en_US sudo apt-get install wine Reading package lists... Done Building dependency tree Reading state information... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: wine : Depends: wine1.5 but it is not going to be installed E: Unable to correct problems, you have held broken packages. wine-1.4 alexander@cosmo:~$ LANGUAGE=en_US sudo apt-get install wine1.4 (...) The following packages have unmet dependencies: wine1.4 : Depends: wine1.4-i386 (= 1.4.1-0ubuntu1) E: Unable to correct problems, you have held broken packages. wine-1.4:i386 alexander@cosmo:~$ LANGUAGE=en_US sudo apt-get install wine1.4:i386 (...) The following packages have unmet dependencies: libaudio2:i386 : Depends: libxt6:i386 but it is not going to be installed libqtgui4:i386 : Depends: libsm6:i386 but it is not going to be installed libunity-webapps0 : Depends: unity-webapps-service but it is not going to be installed openssh-client : Depends: adduser (>= 3.10) but it is not going to be installed Depends: passwd ssh : Depends: openssh-server wine1.4:i386 : Depends: wine1.4-i386:i386 (= 1.4.1-0ubuntu1) Depends: binfmt-support:i386 (>= 1.1.2) Depends: procps:i386 Recommends: cups-bsd:i386 Recommends: gnome-exe-thumbnailer:i386 but it is not installable or kde-runtime:i386 but it is not going to be installed Recommends: ttf-droid:i386 but it is not installable Recommends: ttf-liberation:i386 but it is not installable Recommends: ttf-mscorefonts-installer:i386 Recommends: ttf-umefont:i386 but it is not installable Recommends: ttf-unfonts-core:i386 but it is not installable Recommends: ttf-wqy-microhei:i386 but it is not installable Recommends: winbind:i386 Recommends: winetricks:i386 but it is not going to be installed Recommends: xdg-utils:i386 but it is not installable E: Error, pkgProblemResolver::Resolve generated breaks, this may be caused by held packages. wine-1.5 alexander@cosmo:~$ sudo apt-get install wine1.5 (...) The following packages have unmet dependencies: wine1.5 : Depends: wine1.5-i386 (= 1.5.16-0ubuntu1) E: Unable to correct problems, you have held broken packages. wine-1.5:i386 alexander@cosmo:~$ sudo apt-get install wine1.5:i386 (...) The following packages have unmet dependencies: libaudio2:i386 : Depends: libxt6:i386 but it is not going to be installed libqtgui4:i386 : Depends: libsm6:i386 but it is not going to be installed libunity-webapps0 : Depends: unity-webapps-service but it is not going to be installed openssh-client : Depends: adduser (>= 3.10) but it is not going to be installed Depends: passwd ssh : Depends: openssh-server wine1.5:i386 : Depends: wine1.5-i386:i386 (= 1.5.16-0ubuntu1) but it is not going to be installed Depends: binfmt-support:i386 (>= 1.1.2) Depends: procps:i386 Recommends: cups-bsd:i386 Recommends: gnome-exe-thumbnailer:i386 but it is not installable or kde-runtime:i386 but it is not going to be installed Recommends: ttf-droid:i386 but it is not installable Recommends: ttf-liberation:i386 but it is not installable Recommends: ttf-mscorefonts-installer:i386 Recommends: ttf-umefont:i386 but it is not installable Recommends: ttf-unfonts-core:i386 but it is not installable Recommends: ttf-wqy-microhei:i386 but it is not installable Recommends: winbind:i386 Recommends: winetricks:i386 but it is not going to be installed Recommends: xdg-utils:i386 but it is not installable E: Error, pkgProblemResolver::Resolve generated breaks, this may be caused by held packages. ia32-libs alexander@cosmo:~$ sudo apt-get install ia32-libs (...) The following packages have unmet dependencies: ia32-libs : Depends: ia32-libs-multiarch E: Unable to correct problems, you have held broken packages. ia32-libs:i386 alexander@cosmo:~$ sudo apt-get install ia32-libs:i386 (...) Package ia32-libs:i386 is not available, but is referred to by another package. This may mean that the package is missing, has been obsoleted, or is only available from another source However the following packages replace it: lib32z1 lib32ncurses5 lib32bz2-1.0 lib32asound2 E: Package 'ia32-libs:i386' has no installation candidate

  Read the article

• Sort Your Emails by Conversation in Outlook 2010

  - by Matthew Guay

  Do you prefer the way Gmail sorts your emails by conversation?  Here’s how you can use this handy feature in Outlook 2010 too. One exciting new feature in Outlook 2010 is the ability to sort and link your emails by conversation.  This makes it easier to know what has been discussed in emails, and helps you keep your inbox more tidy.  Some users don’t like their emails linked into conversations, and in the final release of Outlook 2010 it is turned off by default.  Since this is a new feature, new users may overlook it and never know it’s available.  Here’s how you can enable conversation view and keep your email conversations accessible and streamlined. Activate Conversation View By default, your inbox in Outlook 2010 will look much like it always has in Outlook…a list of individual emails. To view your emails by conversation, select the View tab and check the Show as Conversations box on the top left. Alternately, click on the Arrange By tab above your emails, and select Show as Conversations. Outlook will ask if you want to activate conversation view in only this folder or all folders.  Choose All folders to view all emails in Outlook in conversations. Outlook will now resort your inbox, linking emails in the same conversation together.  Individual emails that don’t belong to a conversation will look the same as before, while conversations will have a white triangle carrot on the top left of the message title.  Select the message to read the latest email in the conversation. Or, click the triangle to see all of the messages in the conversation.  Now you can select and read any one of them. Most email programs and services include the previous email in the body of an email when you reply.  Outlook 2010 can recognize these previous messages as well.  You can navigate between older and newer messages from popup Next and Previous buttons that appear when you hover over the older email’s header.  This works both in the standard Outlook preview pane and when you open an email in its own window.   Edit Conversation View Settings Back in the Outlook View tab, you can tweak your conversation view to work the way you want.  You can choose to have Outlook Always Expand Conversations, Show Senders Above the Subject, and to Use Classic Indented View.  By default, Outlook will show messages from other folders in the conversation, which is generally helpful; however, if you don’t like this, you can uncheck it here.  All of these settings will stay the same across all of your Outlook accounts. If you choose Indented View, it will show the title on the top and then an indented message entry underneath showing the name of the sender. The Show Senders Above the Subject view makes it more obvious who the email is from and who else is active in the conversation.  This is especially useful if you usually only email certain people about certain topics, making the subject lines less relevant. Or, if you decide you don’t care for conversation view, you can turn it off by unchecking the box in the View tab as above. Conclusion Although it may take new users some time to get used to, conversation view can be very helpful in keeping your inbox organized and letting important emails stay together.  If you’re a Gmail user syncing your email account with Outlook, you may find this useful as it makes Outlook 2010 work more like Gmail, even when offline. If you’d like to sync your Gmail account with Outlook 2010, check out our articles on syncing it with POP3 and IMAP. Similar Articles Productive Geek Tips Automatically Move Daily Emails to Specific Folders in OutlookQuickly Clean Your Inbox in Outlook 2003/2007Find Emails With Attachments with Outlook 2007’s Instant SearchAdd Your Gmail Account to Outlook 2010 using POPSchedule Auto Send & Receive in Microsoft Outlook TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 VMware Workstation 7 Acronis Online Backup The iPod Revolution Ultimate Boot CD can help when disaster strikes Windows Firewall with Advanced Security – How To Guides Sculptris 1.0, 3D Drawing app AceStock, a Tiny Desktop Quote Monitor Gmail Button Addon (Firefox)

  Read the article

• Help Prevent Carpal Tunnel Problems with Workrave

  - by Matthew Guay

  Whether for work or leisure, many of us spend entirely too much time on the computer everyday.  This puts us at risk of having or aggravating Carpal Tunnel problems, but thanks to Workrave you can help to divert these problems. Workrave helps Carpal Tunnel problems by reminding you to get away from your computer periodically.  Breaking up your computer time with movement can help alleviate many computer and office related health problems.  Workrave helps by reminding you to take short pauses after several minutes of computer use, and longer breaks after continued use.  You can also use it to keep from using the computer for too much You time in a day.  Since you can change the settings to suit you, this can be a great way to make sure you’re getting the breaks you need. Install Workrave on Windows If you’re using Workrave on Windows, download (link below) and install it with the default settings. One installation setting you may wish to change is the startup.  By default Workrave will run automatically when you start your computer; if you don’t want this, you can simply uncheck the box and proceed with the installation. Once setup is finished, you can run Workrave directly from the installer. Or you can open it from your start menu by entering “workrave” in the search box. Install Workrave in Ubuntu If you wish to use it in Ubuntu, you can install it directly from the Ubuntu Software Center.  Click the Applications menu, and select Ubuntu Software Center. Enter “workrave” into the search box in the top right corner of the Software Center, and it will automatically find it.  Click the arrow to proceed to Workrave’s page. This will give you information about Workrave; simply click Install to install Workrave on your system. Enter your password when prompted. Workrave will automatically download and install.   When finished, you can find Workrave in your Applications menu under Universal Access. Using Workrave Workrave by default shows a small counter on your desktop, showing the length of time until your next Micro break (30 second break), Rest break (10 minute break), and max amount of computer usage for the day. When it’s time for a micro break, Workrave will popup a reminder on your desktop. If you continue working, it will disappear at the end of the timer.  If you stop, it will start a micro-break which will freeze most on-screen activities until the timer is over.  You can click Skip or Postpone if you do not want to take a break right then. After an hour of work, Workrave will give you a 10 minute rest break.  During this it will show you some exercises that can help eliminate eyestrain, muscle tension, and other problems from prolonged computer usage.  You can click through the exercises, or can skip or postpone the break if you wish.   Preferences You can change your Workrave preferences by right-clicking on its icon in your system tray and selecting Preferences. Here you can customize the time between your breaks, and the length of your breaks.  You can also change your daily computer usage limit, and can even turn off the postpone and skip buttons on notifications if you want to make sure you follow Workrave and take your rests! From the context menu, you can also choose Statistics.  This gives you an overview of how many breaks, prompts, and more were shown on a given day.  It also shows a total Overdue time, which is the total length of the breaks you skipped or postponed.  You can view your Workrave history as well by simply selecting a date on the calendar.   Additionally, the Activity tab in the Statics pane shows more info about your computer usage, including total mouse movement, mouse button clicks, and keystrokes. Conclusion Whether you’re suffering with Carpal Tunnel or trying to prevent it, Workrave is a great solution to help remind you to get away from your computer periodically and rest.  Of course, since you can simply postpone or skip the prompts, you’ve still got to make an effort to help your own health.  But it does give you a great way to remind yourself to get away from the computer, and especially for geeks, this may be something that we really need! Download Workrave Similar Articles Productive Geek Tips Switch to the Dvorak Keyboard Layout in XPAccess Your MySQL Server Remotely Over SSHHow to Secure Gaim Instant Messenger traffic at Work with SecureCRT and SSHConnect to VMware Server Console Over SSHDisclaimers TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional StockFox puts a Lightweight Stock Ticker in your Statusbar Explore Google Public Data Visually The Ultimate Excel Cheatsheet Convert the Quick Launch Bar into a Super Application Launcher Automate Tasks in Linux with Crontab Discover New Bundled Feeds in Google Reader

  Read the article

• Oracle Linux and Oracle VM pricing guide

  - by wcoekaer

  A few days ago someone showed me a pricing guide from a Linux vendor and I was a bit surprised at the complexity of it. Especially when you look at larger servers (4 or 8 sockets) and when adding virtual machine use into the mix. I think we have a very compelling and simple pricing model for both Oracle Linux and Oracle VM. Let me see if I can explain it in 1 page, not 10 pages. This pricing information is publicly available on the Oracle store, I am using the current public list prices. Also keep in mind that this is for customers using non-oracle x86 servers. When a customer purchases an Oracle x86 server, the annual systems support includes full use (all you can eat) of Oracle Linux, Oracle VM and Oracle Solaris (no matter how many VMs you run on that server, in case you deploy guests on a hypervisor). This support level is the equivalent of premier support in the list below. Let's start with Oracle VM (x86) : Oracle VM support subscriptions are per physical server on which you deploy the Oracle VM Server product. (1) Oracle VM Premier Limited - 1- or 2 socket server : $599 per server per year (2) Oracle VM Premier - more than 2 socket server (4, or 8 or whatever more) : $1199 per server per year The above includes the use of Oracle VM Manager and Oracle Enterprise Manager Cloud Control's Virtualization management pack (including self service cloud portal, etc..) 24x7 support, access to bugfixes, updates and new releases. It also includes all options, live migrate, dynamic resource scheduling, high availability, dynamic power management, etc If you want to play with the product, or even use the product without access to support services, the product is freely downloadable from edelivery. Next, Oracle Linux : Oracle Linux support subscriptions are per physical server. If you plan to run Oracle Linux as a guest on Oracle VM, VMWare or Hyper-v, you only have to pay for a single subscription per system, we do not charge per guest or per number of guests. In other words, you can run any number of Oracle Linux guests per physical server and count it as just a single subscription. (1) Oracle Linux Network Support - any number of sockets per server : $119 per server per year Network support does not offer support services. It provides access to the Unbreakable Linux Network and also offers full indemnification for Oracle Linux. (2) Oracle Linux Basic Limited Support - 1- or 2 socket servers : $499 per server per year This subscription provides 24x7 support services, access to the Unbreakable Linux Network and the Oracle Support portal, indemnification, use of Oracle Clusterware for Linux HA and use of Oracle Enterprise Manager Cloud control for Linux OS management. It includes ocfs2 as a clustered filesystem. (3) Oracle Linux Basic Support - more than 2 socket server (4, or 8 or more) : $1199 per server per year This subscription provides 24x7 support services, access to the Unbreakable Linux Network and the Oracle Support portal, indemnification, use of Oracle Clusterware for Linux HA and use of Oracle Enterprise Manager Cloud control for Linux OS management. It includes ocfs2 as a clustered filesystem (4) Oracle Linux Premier Limited Support - 1- or 2 socket servers : $1399 per server per year This subscription provides 24x7 support services, access to the Unbreakable Linux Network and the Oracle Support portal, indemnification, use of Oracle Clusterware for Linux HA and use of Oracle Enterprise Manager Cloud control for Linux OS management, XFS filesystem support. It also offers Oracle Lifetime support, backporting of patches for critical customers in previous versions of package and ksplice zero-downtime updates. (5) Oracle Linux Premier Support - more than 2 socket servers : $2299 per server per year This subscription provides 24x7 support services, access to the Unbreakable Linux Network and the Oracle Support portal, indemnification, use of Oracle Clusterware for Linux HA and use of Oracle Enterprise Manager Cloud control for Linux OS management, XFS filesystem support. It also offers Oracle Lifetime support, backporting of patches for critical customers in previous versions of package and ksplice zero-downtime updates. (6) Freely available Oracle Linux - any number of sockets You can freely download Oracle Linux, install it on any number of servers and use it for any reason, without support, without right to use of these extra features like Oracle Clusterware or ksplice, without indemnification. However, you do have full access to all errata as well. Need support? then use options (1)..(5) So that's it. Count number of 2 socket boxes, more than 2 socket boxes, decide on basic or premier support level and you are done. You don't have to worry about different levels based on how many virtual instance you deploy or want to deploy. A very simple menu of choices. We offer, inclusive, Linux OS clusterware, Linux OS Management, provisioning and monitoring, cluster filesystem (ocfs), high performance filesystem (xfs), dtrace, ksplice, ofed (infiniband stack for high performance networking). No separate add-on menus. NOTE : socket/cpu can have any number of cores. So whether you have a 4,6,8,10 or 12 core CPU doesn't matter, we count the number of physical CPUs.

  Read the article

• Use Drive Mirroring for Instant Backup in Windows 7

  - by Trevor Bekolay

  Even with the best backup solution, a hard drive crash means you’ll lose a few hours of work. By enabling drive mirroring in Windows 7, you’ll always have an up-to-date copy of your data. Windows 7’s mirroring – which is only available in Professional, Enterprise, and Ultimate editions – is a software implementation of RAID 1, which means that two or more disks are holding the exact same data. The files are constantly kept in sync, so that if one of the disks fails, you won’t lose any data. Note that mirroring is not technically a backup solution, because if you accidentally delete a file, it’s gone from both hard disks (though you may be able to recover the file). As an additional caveat, having mirrored disks requires changing them to “dynamic disks,” which can only be read within modern versions of Windows (you may have problems working with a dynamic disk in other operating systems or in older versions of Windows). See this Wikipedia page for more information. You will need at least one empty disk to set up disk mirroring. We’ll show you how to mirror an existing disk (of equal or lesser size) without losing any data on the mirrored drive, and how to set up two empty disks as mirrored copies from the get-go. Mirroring an Existing Drive Click on the start button and type partitions in the search box. Click on the Create and format hard disk partitions entry that shows up. Alternatively, if you’ve disabled the search box, press Win+R to open the Run window and type in: diskmgmt.msc The Disk Management window will appear. We’ve got a small disk, labeled OldData, that we want to mirror in a second disk of the same size. Note: The disk that you will use to mirror the existing disk must be unallocated. If it is not, then right-click on it and select Delete Volume… to mark it as unallocated. This will destroy any data on that drive. Right-click on the existing disk that you want to mirror. Select Add Mirror…. Select the disk that you want to use to mirror the existing disk’s data and press Add Mirror. You will be warned that this process will change the existing disk from basic to dynamic. Note that this process will not delete any data on the disk! The new disk will be marked as a mirror, and it will starting copying data from the existing drive to the new one. Eventually the drives will be synced up (it can take a while), and any data added to the E: drive will exist on both physical hard drives. Setting Up Two New Drives as Mirrored If you have two new equal-sized drives, you can format them to be mirrored copies of each other from the get-go. Open the Disk Management window as described above. Make sure that the drives are unallocated. If they’re not, and you don’t need the data on either of them, right-click and select Delete volume…. Right-click on one of the unallocated drives and select New Mirrored Volume…. A wizard will pop up. Click Next. Click on the drives you want to hold the mirrored data and click Add. Note that you can add any number of drives. Click Next. Assign it a drive letter that makes sense, and then click Next. You’re limited to using the NTFS file system for mirrored drives, so enter a volume label, enable compression if you want, and then click Next. Click Finish to start formatting the drives. You will be warned that the new drives will be converted to dynamic disks. And that’s it! You now have two mirrored drives. Any files added to E: will reside on both physical disks, in case something happens to one of them. Conclusion While the switch from basic to dynamic disks can be a problem for people who dual-boot into another operating system, setting up drive mirroring is an easy way to make sure that your data can be recovered in case of a hard drive crash. Of course, even with drive mirroring, we advocate regular backups to external drives or online backup services. Similar Articles Productive Geek Tips Rebit Backup Software [Review]Disabling Instant Search in Outlook 2007Restore Files from Backups on Windows Home ServerSecond Copy 7 [Review]Backup Windows Home Server Folders to an External Hard Drive TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 VMware Workstation 7 Acronis Online Backup Windows Firewall with Advanced Security – How To Guides Sculptris 1.0, 3D Drawing app AceStock, a Tiny Desktop Quote Monitor Gmail Button Addon (Firefox) Hyperwords addon (Firefox) Backup Outlook 2010

  Read the article

• Manage Your Amazon S3 Account with CloudBerry Explorer

  - by Mysticgeek

  If you have an Amazon S3 account you’re using to backup your data, you might want an easy way to manage it. CloudBerry Explorer is a free app that runs on your desktop an provides an easy way to manage your S3 account. Installation and Setup Just download and install the application with the defaults. When the application launches you’ll be prompted to enter in your username and email to get a registration key. Or you can continue on by clicking Register later. Now you will want to set up your Amazon S3 account. Click on File \ Amazon S3 Accounts. Double-click on the New Account icon.   Next enter in your Amazon account Access and Secret keys, select SSL if you want, then click the Test Connection button. Provided everything was entered correctly, you’ll see the Connection Success screen, just close out of it. Browse and Manage files Once you have your account setup through the Explorer, you can start viewing and managing your files on S3. The left pane shows your S3 buckets and stored files, while the right side shows your local computer. This allows you to manage your files in your Amazon S3 buckets directly from your desktop! It’s very easy to use, and you can drag and drop files from your computer to the S3 account or vice versa. There is also the ability to transfer files between Amazon S3 accounts from within the explorer. Go into Tools and Content Types and you can control the file types by adding, removing, or editing them. If you end up messing something up along the lines, you can always select Reset to defaults and everything will be back to normal. There is a multiple tabbed view so you can easily keep track of your different accounts and local machine. It allows the ability to create new storage buckets directly in the Explorer. Or you can delete buckets as well… Different actions can be accessed from the toolbars or by right-clicking and selecting from the context menu. Here we see a cool option that lets you move your data inside Amazon S3. It is faster and doesn’t cost money by moving the files to your computer first, then to another account. However, if you want data moved to your local machine first, you have that option as well.   Not all features are available in the free version, and if it’s not, you’ll be prompted to purchase a license for the Pro version. We will have a comprehensive review of the Pro version in the near future.    If you ever need help with CloudBerry Explorer, go to Tools \ Diagnostics. It will run a quick diagnostics check and you can send the information to the CloudBerry team for assistance. Delete Files from Amazon S3 To delete a file from you Amazon S3 account, simply highlight the files or folder you want to get rid of then click Delete on the toolbar. You can also right-click the file and select Delete from the Context Menu. Click Yes to the confirmation dialog box… Then you can watch the progress as your files are deleted in the bottom section of the explorer. Conclusion CloudBerry Explorer free version has several neat features that will allow you easy and basic control over you Amazon S3 account. The free version may be enough for basic users, but power users will want to upgrade to the pro version, as it includes a lot more features. Using the free version allows you to get a feel for what CloudBerry Explorer has to offer, and is a good starting point. Keep in mind that Amazon S3 is introducing Reduced Redundancy Storage which will lower the price of data stored. The price drops from $0.15 per GB to only $0.10 per GB. If you’re a Windows Home Server user, check out our review of CloudBerry Online Backup 1.5 for WHS. Download CloudBerry Explorer Free for Amazon S3 Similar Articles Productive Geek Tips CloudBerry Online Backup 1.5 for Windows Home ServerReopen Closed Tabs in Internet ExplorerPreview and Purchase Ebooks with Kindle for PCTroubleshoot and Manage Addons in Internet Explorer 8Beginner Geek: Delete User Accounts in Windows 7 TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 VMware Workstation 7 Google TV The iPod Revolution Ultimate Boot CD can help when disaster strikes Windows Firewall with Advanced Security – How To Guides Sculptris 1.0, 3D Drawing app AceStock, a Tiny Desktop Quote Monitor

  Read the article

• Beginner Guide to User Styles for Firefox

  - by Asian Angel

  While the default styles for most websites are nice there may be times when you would love to tweak how things look. See how easy it can be to change how websites look with the Stylish Extension for Firefox. Note: Scripts from Userstyles.org can also be added to Greasemonkey if you have it installed. Getting Started After installing the extension you will be presented with a first run page. You may want to keep it open so that you can browse directly to the Userstyles.org website using the link in the upper left corner. In the lower right corner you will have a new Status Bar Icon. If you have used Greasemonkey before this icon works a little differently. It will be faded out due to no user style scripts being active at the moment. You can use either a left or right click to access the Context Menu. The user style script management section is also added into your Add-ons Management Window instead of being separate. When you reach the user style scripts homepage you can choose to either learn more about the extension & scripts or… Start hunting for lots of user style script goodness. There will be three convenient categories to get you jump-started if you wish. You could also conduct a search if you have something specific in mind. Here is some information directly from the website provided for your benefit. Notice the reference to using these scripts with Greasemonkey… This section shows you how the scripts have been categorized and can give you a better idea of how to search for something more specific. Finding & Installing Scripts For our example we decided to look at the Updated Styles Section”first. Based on the page number listing at the bottom there are a lot of scripts available to look through. Time to refine our search a little bit… Using the drop-down menu we selected site styles and entered Yahoo in the search blank. Needless to say 5 pages was a lot easier to look through than 828. We decided to install the Yahoo! Result Number Script. When you do find a script (or scripts) that you like simply click on the Install with Stylish Button. A small window will pop up giving you the opportunity to preview, proceed with the installation, edit the code, or cancel the process. Note: In our example the Preview Function did not work but it may be something particular to the script or our browser’s settings. If you decide to do some quick editing the window shown above will switch over to this one. To return to the previous window and install the user style script click on the Switch to Install Button. After installing the user style the green section in the script’s webpage will actually change to this message… Opening up the Add-ons Manager Window shows our new script ready to go. The script worked perfectly when we conducted a search at Yahoo…the Status Bar Icon also changed from faded out to full color (another indicator that everything is running nicely). Conclusion If you prefer a custom look for your favorite websites then you can have a lot of fun experimenting with different user style scripts. Note: See our article here for specialized How-To Geek User Style Scripts that can be added to your browser. Links Download the Stylish Extension (Mozilla Add-ons) Visit the Userstyles.org Website Install the Yahoo! Result Number User Style Similar Articles Productive Geek Tips Spice Up that Boring about:blank Page in FirefoxExpand the Add Bookmark Dialog in Firefox by DefaultEnjoy How-To Geek User Style Script GoodnessAuto-Hide Your Cluttered Firefox Status Bar ItemsBeginner Geek: Delete User Accounts in Windows 7 TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips VMware Workstation 7 Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Bypass Waiting Time On Customer Service Calls With Lucyphone MELTUP – "The Beginning Of US Currency Crisis And Hyperinflation" Enable or Disable the Task Manager Using TaskMgrED Explorer++ is a Worthy Windows Explorer Alternative Error Goblin Explains Windows Error Codes Twelve must-have Google Chrome plugins

  Read the article

• Private Cloud: Putting some method behind the madness

  - by Sudip Datta

  Finally, I decided to join the blogging community. And what could be a better time to start than the week after OpenWorld 2012. 50K+ attendees, demonstrations, speaker sessions and a whole lot of buzz on Oracle Cloud..It was raining clouds in this year's Openworld. I am not here to write about Oracle's cloud strategy in general, but on Enterprise Manager's cloud management capabilities. This year's Openworld was the first after we announced the 12c Cloud Control and we were happy to share the stage with quite a few early adopters. Stay tuned for videos from our customers and partners, I will post them as they get published. I met a number of platform administrators in Oracle-DBAs, Middleware Admins, SOA Admins...The cloud has affected them all, at least to the point where it beckoned more than just curiosity..Most IT infrastructure are already heavily virtualized (on VMWare and on others including Oracle VM), and some would claim they are already on “cloud” (at least their Sysadmins told them so). But none of them were confident of the benefits because their pain points continued to grow.. Isn't cloud supposed to ease those? Instead, they were chasing hundreds of databases running on hundreds of VMs, often with as much certainty propounded by Heisenberg. What happened to the age-old IT discipline around administration, compliance, configuration management? VMs are great for what they are. I personally think they have opened the doors to new approaches in which an application stack gets provisioned and updated. In fact, Enterprise Manager 12c is possibly the only tool out there that can provision full-fledged application as VM Assemblies. In this year's Openworld, customers talked on how they provisioned RAC and Siebel assemblies, which as the techies out there know, are not trivial (hearing provisioning time for Siebel down from weeks to hours was gratifying indeed). However, I do have an issue with a "one-size fits all" approach to cloud. In a week's span, I met several personas: Project owners requiring an EC2 like VM instance for their projects Admins needing the same for Sparc-Solaris. DBAs requiring dedicated databases for new projects APEX Developers needing just a ready-to-consume schema as a service Java Developers looking for a runtime platform QA engineers needing a fast clone of their production environment If you drill down further, you will end up peeling more layers of the details. For example, the requirements for Load testing and Functional testing are very different. For Load testing the test environment should ideally be the same as the production. You shouldn't run production on Exadata and load test on a VM; they will just not be good representations of one another. For Functional testing it does not possibly matter. DBAs seem to be at the worst affected of the lot. It seems they have been asked to choose between agile provisioning and  faster runtime performance. And in some cases, it is really a Hobson's choice, because their infrastructure provider made no distinction between the OLTP application and the Virtual desktop! Sad indeed. When one looks at the portfolio of services that we already offer (vanilla IaaS, VM Assembly based PaaS, DBaaS) or have announced (Java PaaS, Instant Cloning, Schema-aaS), one can possibly think that we are trying to be the "renaissance man" ! Well I would have possibly digested that had it not been for the various personas that I described above. Getting the use cases right is very important for an application such as cloud management. We iterate and iterate over these over and over again and re-validate them in CABs (Customer Advisory Boards). We consider over the major aspects of tenancy: service placement, resource isolation (can a tenant execute an expensive SQL and run away with all the resources), quota and security. We, in Engineering, keep reminding ourselves that we are dealing with enterprise clouds. We owe it to our customer base ! In the coming posts, I will drill down more into each of the services. In the meanwhile, here are some collateral and  demos for starters with EM 12c. http://www.oracle.com/technetwork/oem/cloud-mgmt/index.html Sudip Datta The views expressed here are my own and do not necessarily reflect the views of Oracle. Stay Connected: Twitter | Facebook | YouTube | Linkedin | Newsletter --

  Read the article

• Calculating CPU frequency in C with RDTSC always returns 0

  - by Nazgulled

  Hi, The following piece of code was given to us from our instructor so we could measure some algorithms performance: #include <stdio.h> #include <unistd.h> static unsigned cyc_hi = 0, cyc_lo = 0; static void access_counter(unsigned *hi, unsigned *lo) { asm("rdtsc; movl %%edx,%0; movl %%eax,%1" : "=r" (*hi), "=r" (*lo) : /* No input */ : "%edx", "%eax"); } void start_counter() { access_counter(&cyc_hi, &cyc_lo); } double get_counter() { unsigned ncyc_hi, ncyc_lo, hi, lo, borrow; double result; access_counter(&ncyc_hi, &ncyc_lo); lo = ncyc_lo - cyc_lo; borrow = lo > ncyc_lo; hi = ncyc_hi - cyc_hi - borrow; result = (double) hi * (1 << 30) * 4 + lo; return result; } However, I need this code to be portable to machines with different CPU frequencies. For that, I'm trying to calculate the CPU frequency of the machine where the code is being run like this: int main(void) { double c1, c2; start_counter(); c1 = get_counter(); sleep(1); c2 = get_counter(); printf("CPU Frequency: %.1f MHz\n", (c2-c1)/1E6); printf("CPU Frequency: %.1f GHz\n", (c2-c1)/1E9); return 0; } The problem is that the result is always 0 and I can't understand why. I'm running Linux (Arch) as guest on VMware. On a friend's machine (MacBook) it is working to some extent; I mean, the result is bigger than 0 but it's variable because the CPU frequency is not fixed (we tried to fix it but for some reason we are not able to do it). He has a different machine which is running Linux (Ubuntu) as host and it also reports 0. This rules out the problem being on the virtual machine, which I thought it was the issue at first. Any ideas why this is happening and how can I fix it?

  Read the article

• while creating archetype getting following error

  - by munna

  D:\Training\workspace\vppsourcemvn archetype:generate -B -DarchetypeGroupId=org .appfuse.archetypes -DarchetypeArtifactId=appfuse-modular-struts-archetype -Darc hetypeVersion=2.1.0-M1 -DgroupId=com.vmware -DartifactId=vpp [INFO] Scanning for projects... [INFO] Searching repository for plugin with prefix: 'archetype'. [INFO] ------------------------------------------------------------------------ [INFO] Building Maven Default Project [INFO] task-segment: [archetype:generate] (aggregator-style) [INFO] ------------------------------------------------------------------------ [INFO] Preparing archetype:generate [INFO] No goals needed for project - skipping [INFO] [archetype:generate {execution: default-cli}] [INFO] Generating project in Batch mode [WARNING] Error reading archetype catalog http://repo1.maven.org/maven2 org.apache.maven.wagon.TransferFailedException: Error transferring file: Connect ion timed out: connect at org.apache.maven.wagon.providers.http.LightweightHttpWagon.fillInputD ata(LightweightHttpWagon.java:143) at org.apache.maven.wagon.StreamWagon.getInputStream(StreamWagon.java:11 6) at org.apache.maven.wagon.StreamWagon.getIfNewer(StreamWagon.java:88) at org.apache.maven.wagon.StreamWagon.get(StreamWagon.java:61) at org.apache.maven.archetype.source.RemoteCatalogArchetypeDataSource.ge tArchetypeCatalog(RemoteCatalogArchetypeDataSource.java:97) at org.apache.maven.archetype.DefaultArchetypeManager.getRemoteCatalog(D efaultArchetypeManager.java:195) at org.apache.maven.archetype.DefaultArchetypeManager.getRemoteCatalog(D efaultArchetypeManager.java:184) at org.apache.maven.archetype.ui.DefaultArchetypeSelector.getArchetypesB yCatalog(DefaultArchetypeSelector.java:278) at org.apache.maven.archetype.ui.DefaultArchetypeSelector.selectArchetyp e(DefaultArchetypeSelector.java:69) at org.apache.maven.archetype.mojos.CreateProjectFromArchetypeMojo.execu te(CreateProjectFromArchetypeMojo.java:186) at org.apache.maven.plugin.DefaultPluginManager.executeMojo(DefaultPlugi nManager.java:490) at org.apache.maven.lifecycle.DefaultLifecycleExecutor.executeGoals(Defa ultLifecycleExecutor.java:694) at org.apache.maven.lifecycle.DefaultLifecycleExecutor.executeStandalone Goal(DefaultLifecycleExecutor.java:569) at org.apache.maven.lifecycle.DefaultLifecycleExecutor.executeGoal(Defau ltLifecycleExecutor.java:539) at org.apache.maven.lifecycle.DefaultLifecycleExecutor.executeGoalAndHan dleFailures(DefaultLifecycleExecutor.java:387) at org.apache.maven.lifecycle.DefaultLifecycleExecutor.executeTaskSegmen ts(DefaultLifecycleExecutor.java:284) at org.apache.maven.lifecycle.DefaultLifecycleExecutor.execute(DefaultLi fecycleExecutor.java:180) at org.apache.maven.DefaultMaven.doExecute(DefaultMaven.java:328) at org.apache.maven.DefaultMaven.execute(DefaultMaven.java:138) at org.apache.maven.cli.MavenCli.main(MavenCli.java:362) at org.apache.maven.cli.compat.CompatibleMain.main(CompatibleMain.java:6 0) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl. java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces sorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at org.codehaus.classworlds.Launcher.launchEnhanced(Launcher.java:315) at org.codehaus.classworlds.Launcher.launch(Launcher.java:255) at org.codehaus.classworlds.Launcher.mainWithExitCode(Launcher.java:430) at org.codehaus.classworlds.Launcher.main(Launcher.java:375) Caused by: java.net.ConnectException: Connection timed out: connect at java.net.PlainSocketImpl.socketConnect(Native Method) at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333) at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195) at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182) at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366) at java.net.Socket.connect(Socket.java:529) at java.net.Socket.connect(Socket.java:478) at sun.net.NetworkClient.doConnect(NetworkClient.java:163) at sun.net.www.http.HttpClient.openServer(HttpClient.java:394) at sun.net.www.http.HttpClient.openServer(HttpClient.java:529) at sun.net.www.http.HttpClient.(HttpClient.java:233) at sun.net.www.http.HttpClient.New(HttpClient.java:306) at sun.net.www.http.HttpClient.New(HttpClient.java:323) at sun.net.www.protocol.http.HttpURLConnection.getNewHttpClient(HttpURLC onnection.java:860) at sun.net.www.protocol.http.HttpURLConnection.plainConnect(HttpURLConne ction.java:801) at sun.net.www.protocol.http.HttpURLConnection.connect(HttpURLConnection .java:726) at sun.net.www.protocol.http.HttpURLConnection.getInputStream(HttpURLCon nection.java:1049) at java.net.HttpURLConnection.getResponseCode(HttpURLConnection.java:373 ) at org.apache.maven.wagon.providers.http.LightweightHttpWagon.fillInputD ata(LightweightHttpWagon.java:115) ... 28 more [WARNING] No archetype found in Remote catalog. Defaulting to internal Catalog [INFO] ------------------------------------------------------------------------ [ERROR] BUILD FAILURE [INFO] ------------------------------------------------------------------------ [INFO] [INFO] ------------------------------------------------------------------------ [INFO] For more information, run Maven with the -e switch [INFO] ------------------------------------------------------------------------ [INFO] Total time: 46 seconds [INFO] Finished at: Wed Jun 09 16:11:07 IST 2010 [INFO] Final Memory: 11M/28M [INFO] ------------------------------------------------------------------------

  Read the article

• error loading (TypeLoadException) on asp.net/xsp/mono on debian/opensuse

  - by acidzombie24

  When i reset apache and load my website i get the first error below. I have no idea what the problem is. If i reload the page again (without restarting apache) i get the 2nd error, probably because the first error occurred and BaseUser is the first class/func that Application_Start uses. Why am i getting this load exception? Whats messed up is i tried using mono's VMWare img to debug it and i got the very same exception (until i restarted which now refuses to give me anything but 404 errors). However when i use mono develop to run the project the site runs PERFECT. WTF. Any ideas? Server Error in '/' Application A type load exception has occurred. Description: HTTP 500. Error processing request. Stack Trace: System.TypeLoadException: A type load exception has occurred. at (wrapper managed-to-native) System.Reflection.MonoMethod:InternalInvoke (System.Reflection.MonoMethod*,object,object[],System.Exception&) at System.Reflection.MonoMethod.Invoke (System.Object obj, BindingFlags invokeAttr, System.Reflection.Binder binder, System.Object[] parameters, System.Globalization.CultureInfo culture) [0x00000] in <filename unknown>:0 Version information: Mono Runtime Version: 2.8.1 (tarball Mon Dec 27 10:20:03 UTC 2010); ASP.NET Version: 2.0.50727.1433 Second: Server Error in '/' Application Could not load type 'mynamespace.BaseUser' from assembly 'mynamespace, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null'. Description: HTTP 500. Error processing request. Stack Trace: System.TypeLoadException: Could not load type 'mynamespace.BaseUser' from assembly 'mynamespace, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null'. at mynamespace.Global.Application_Start (System.Object sender, System.EventArgs e) [0x00000] in <filename unknown>:0 at (wrapper managed-to-native) System.Reflection.MonoMethod:InternalInvoke (System.Reflection.MonoMethod*,object,object[],System.Exception&) at System.Reflection.MonoMethod.Invoke (System.Object obj, BindingFlags invokeAttr, System.Reflection.Binder binder, System.Object[] parameters, System.Globalization.CultureInfo culture) [0x00000] in <filename unknown>:0 Version information: Mono Runtime Version: 2.8.1 (tarball Mon Dec 27 10:20:03 UTC 2010); ASP.NET Version: 2.0.50727.1433 -edit- i'll mention that i tried MonoDevelops build of my site on both opensuse and my website and i get the exact same problem.

  Read the article

< Previous Page | 92 93 94 95 96 97 98  | Next Page >