Search Results

Search found 947 results on 38 pages for 'radeon'.

Page 1/38 | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

• Attach radeon driver to specific PCI devices?

  - by genpfault

  I have two Radeon cards in this machine, a 6570 and a 6950: lspci | grep VGA: 01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Turks [Radeon HD 6570] 02:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Cayman PRO [Radeon HD 6950] I'm trying to get VGA passthrough to work with KVM on Debian Wheezy, passing through the 6950 as a secondary video card to a Windows 7 guest. This works fine if I blacklist the radeon kernel module via /etc/modprobe.d/. If I remove the blacklist to run X11 (or even just a KMS console) on the 6570 the radeon module seems to attach to both cards: dmesg | egrep "01:00.0|02:00.0|radeon": pci 0000:01:00.0: [1002:6759] type 0 class 0x000300 pci 0000:01:00.0: reg 10: [mem 0xe0000000-0xefffffff 64bit pref] pci 0000:01:00.0: reg 18: [mem 0xf7e20000-0xf7e3ffff 64bit] pci 0000:01:00.0: reg 20: [io 0xe000-0xe0ff] pci 0000:01:00.0: reg 30: [mem 0xf7e00000-0xf7e1ffff pref] pci 0000:01:00.0: supports D1 D2 pci 0000:02:00.0: [1002:6719] type 0 class 0x000300 pci 0000:02:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref] pci 0000:02:00.0: reg 18: [mem 0xf7d20000-0xf7d3ffff 64bit] pci 0000:02:00.0: reg 20: [io 0xd000-0xd0ff] pci 0000:02:00.0: reg 30: [mem 0xf7d00000-0xf7d1ffff pref] pci 0000:02:00.0: supports D1 D2 vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=none,locks=none vgaarb: bridge control possible 0000:02:00.0 vgaarb: bridge control possible 0000:01:00.0 pci 0000:01:00.0: Boot video device [drm] radeon kernel modesetting enabled. radeon 0000:01:00.0: setting latency timer to 64 radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used) radeon 0000:01:00.0: GTT: 512M 0x0000000040000000 - 0x000000005FFFFFFF [drm] radeon: 1024M of VRAM memory ready [drm] radeon: 512M of GTT memory ready. radeon 0000:01:00.0: irq 46 for MSI/MSI-X radeon 0000:01:00.0: radeon: using MSI. [drm] radeon: irq initialized. radeon 0000:01:00.0: WB enabled [drm] radeon: ib pool ready. [drm] radeon: power management initialized fbcon: radeondrmfb (fb0) is primary device fb0: radeondrmfb frame buffer device [drm] Initialized radeon 2.12.0 20080528 for 0000:01:00.0 on minor 0 radeon 0000:02:00.0: enabling device (0000 -> 0003) radeon 0000:02:00.0: setting latency timer to 64 radeon 0000:02:00.0: VRAM: 2048M 0x0000000000000000 - 0x000000007FFFFFFF (2048M used) radeon 0000:02:00.0: GTT: 512M 0x0000000080000000 - 0x000000009FFFFFFF [drm] radeon: 2048M of VRAM memory ready [drm] radeon: 512M of GTT memory ready. radeon 0000:02:00.0: irq 49 for MSI/MSI-X radeon 0000:02:00.0: radeon: using MSI. [drm] radeon: irq initialized. radeon 0000:02:00.0: WB enabled [drm] radeon: ib pool ready. [drm] radeon: power management initialized fb1: radeondrmfb frame buffer device [drm] Initialized radeon 2.12.0 20080528 for 0000:02:00.0 on minor 1 [drm] radeon: finishing device. radeon 0000:02:00.0: ffff88041a941800 unpin not necessary [drm] radeon: ttm finalized pci-stub 0000:02:00.0: claimed by stub pci-stub 0000:02:00.0: irq 49 for MSI/MSI-X This causes the Win7 VM to bluescreen on boot. How can I configure things so that the radeon module only attaches to the 6570 and not the 6950?

  Read the article

• How to setup Dual Head with "radeon" driver for R770?

  - by user1709408

  I want to make dual head setup without xrandr but with Xinerama. I put "Screen 1" line into xorg.conf, but card still show identical output on DVI-2 and DVI-3 It is important to use xinerama for me (to glue three monitors), that's why i decide not to use ranrd (randr is incompatible with xinerama as i read somewhere) Here is my videocard (HD 4850 X2): lspci | grep R700 03:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI R700 [Radeon HD 4850] 04:00.0 Display controller: Advanced Micro Devices [AMD] nee ATI R700 [Radeon HD 4850] Here is how monitors are connected: grep "DVI" /var/log/Xorg.0.log [ 1210.002] (II) RADEON(0): Output DVI-0 using monitor section Monitor0 [ 1210.048] (II) RADEON(0): Output DVI-1 has no monitor section [ 1210.079] (II) RADEON(0): EDID for output DVI-0 [ 1210.080] (II) RADEON(0): Printing probed modes for output DVI-0 [ 1210.128] (II) RADEON(0): EDID for output DVI-1 [ 1210.128] (II) RADEON(0): Output DVI-0 connected [ 1210.128] (II) RADEON(0): Output DVI-1 disconnected [ 1210.128] (II) RADEON(0): Output DVI-0 using initial mode 1920x1200 [ 1210.160] (II) RADEON(1): Output DVI-2 using monitor section Monitor2 [ 1210.215] (II) RADEON(1): Output DVI-3 has no monitor section [ 1210.246] (II) RADEON(1): EDID for output DVI-2 [ 1210.247] (II) RADEON(1): Printing probed modes for output DVI-2 [ 1210.299] (II) RADEON(1): EDID for output DVI-3 [ 1210.300] (II) RADEON(1): Printing probed modes for output DVI-3 [ 1210.300] (II) RADEON(1): Output DVI-2 connected [ 1210.300] (II) RADEON(1): Output DVI-3 connected [ 1210.300] (II) RADEON(1): Output DVI-2 using initial mode 1920x1200 [ 1210.300] (II) RADEON(1): Output DVI-3 using initial mode 1920x1200 Here is my /etc/X11/xorg.conf Section "ServerFlags" Option "RandR" "0" Option "Xinerama" "1" EndSection Section "ServerLayout" Identifier "Three Head Layout" Screen "MyPrecious0" Screen "MyPrecious2" RightOf "MyPrecious0" Screen "MyPrecious3" LeftOf "MyPrecious0" EndSection Section "Screen" Identifier "MyPrecious0" Monitor "Monitor0" Device "Device300" EndSection Section "Screen" Identifier "MyPrecious2" Monitor "Monitor2" Device "Device400" EndSection Section "Screen" Identifier "MyPrecious3" Monitor "Monitor3" Device "Device401" EndSection Section "Device" Identifier "Device300" BusID "PCI:3:0:0" Screen 0 Driver "radeon" EndSection Section "Device" Identifier "Device400" BusID "PCI:4:0:0" Screen 0 Driver "radeon" EndSection Section "Device" Identifier "Device401" BusID "PCI:4:0:0" Screen 1 Driver "radeon" EndSection Section "Monitor" Identifier "Monitor0" EndSection Section "Monitor" Identifier "Monitor2" EndSection Section "Monitor" Identifier "Monitor3" EndSection I tried to switch to vesa driver (didn't work for me) I tried to add options like Option "ZaphodHeads" "DVI-2" and Option "ZaphodHeads" "DVI-3" into sections "Device 400" and "Device 401" (this didn't help because "ZaphodHeads" option is for ranrd, and randr is disabled by decision) I tried to merge sections "Device 400" and "Device 401" into one section and add Option "ZaphodHeads" "DVI-2,DVI-3" (see comment about randr above) single section setup helps to change log line RADEON(1): Output DVI-3 has no monitor section into RADEON(1): Output DVI-3 using monitor section Monitor3 but nothing was enough to switch from screen cloning to separate screens. This problem (lack of documentation on radeon driver) is similar to these: Radeon display driver clones monitors while using Xinerama (moderators decision to close that problem was wrong) Ubuntu 12.10 multi-monitor setup isn't working The problem is solvable, because this hardware worked as three headed for me earlier with gentoo/xorg-server-1.3 Xorg -configure creates setup for the first monitor on the first GPU Please don't advise to use fglrx/aticonfig/amdcccle (this goes against my religion beliefs)

  Read the article

• ATI Radeon HD 4650 AGP Video card not recognized properly

  - by PastorLarry

  I have an ASUS ATI Radeon HD 4650 AGP in this system (yeah, I know how old it is). I've been on Ubuntu since 10.04, and the system has never properly recognized the card. I have always had the VESA drivers installed. Now that I have the time to address the problem, 12.04 was listing the card as "Unknown" under the System Settings. Meanwhile, Sysinfo recognizes the card as: Advanced Micro Devices [AMD] nee ATI RV730 Pro AGP [Radeon HD 4600 Series] (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. Device 0028 So I know that this card should be using the radeon driver (or even the radeonhd driver). However, when I installed the mesa-utils package, the card is suddenly reported as: Gallium 0.4 on llvmpipe (LLVM 0x300) So now, I'm completely at a loss. It seems that the llvmpipe stuff has to do with OpenGL, but it still appears that I don't have the proper video driver installed. That being said, anyone know what I can do to force the system to recognize the card and use the radeon driver? [EDIT 05.28] I did look at some other information, including glxinfo and a couple of other commands (it was REALLY late, so I don't remember the other commands) and I got these: glxinfo | grep vendor: server glx vendor string: SGI client glx vendor string: Mesa Project and SGI OpenGL vendor string: X.org glxinfo | grep renderer: OpenGL renderer string: Gallium 0.4 on AMD RV730 One of the other commands gave a whole lot of info and near the end stated that the activation string for the radeon driver was "modprobe radeon". I've tried that from sudo and as root, but it doesn't seem to change anything. I'm at a complete loss. I've even added the xorg-edgers ppa to my Software Sources and updated and rebooted the system, but nothing has changed. Most of all, I can't seem to find any documentation on this issue, as it seems that it's assumed that the radeon driver will install automatically, no questions asked. I feel like such a newbie. Does anyone have any ideas on this? [edit 05.28] results of lsmod | grep radeon (in a more readable format than the comment below): radeon 733693 3 ttm 65344 1 radeon drm_kms_helper 45466 1 radeon drm 197692 5 radeon,ttm,drm_kms_helper i2c_algo_bit 13199 1 radeon [edit 05.29] This is my /etc/X11/xorg.conf: Section "ServerLayout" Identifier "aticonfig Layout" Screen 0 "aticonfig-Screen[0]-0" 0 0 EndSection Section "Module" EndSection Section "Monitor" Identifier "aticonfig-Monitor[0]-0" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Device" Identifier "aticonfig-Device[0]-0" Driver "fglrx" BusID "PCI:1:0:0" EndSection Section "Screen" Identifier "aticonfig-Screen[0]-0" So here is my question. Can I simply change the name of the driver in the device section to "radeon" instead of "fglrx" and have the radeon driver work? Or is ther a way to use this as a tmeplate and change the appropriate lines and activate the radeon driver through this file?

  Read the article

• Using PhysX on a Radeon GPU?

  - by davr

  Is it possible to get PhysX to run on a Radeon GPU? I've seen various posts on forums claiming someone has found a way, but I was unable to locate any actual guides or software downloads to do it. Note: I don't mean running a GeForce and Radeon GPU in the same machine, I mean having only a Radeon GPU and having it run PhysX.

  Read the article

• Ubuntu 12.10 - Resolution stuck at 1024x768 using Open Source Radeon Driver

  - by mumble

  I'm using Ubuntu 12.10 with an ATI Radeon HD5670 card. I currently have the open source xorg-edgers driver. I've been using this driver interchangeably with the Radeon open source driver since fglrx seems to give me a lot of freezes. So I can't really use proprietary drivers, the Radeon driver seems to be stable for me, the resolution is the only problem. The resolution is stuck at 1024x768, where my monitor's native resolution is 1366x768. How do I enable that resolution? Going to System Settings Display only gives me 800x600 and 1024x768 by the way. And just another question, how do I know if xorg-edgers driver is enabled? When I run sudo lshw -c video, I still see the radeon driver. configuration: driver=radeon latency=0 Thanks a lot in advance!

  Read the article

• Ubuntu 14.04LTS - runtime video card configuration through Radeon driver

  - by RJVB

  How does one configure Radeon video cards when using the open source Radeon driver - power profile, vsync, etc? Why I try the widely documented solution (against overheating) that worked for me under LMDE (confirmed with kernels up to 3.12.6), I get the following error: $ sudo cat /sys/class/drm/card0/device/power_profile default $ sudo sh -c "echo mid > /sys/class/drm/card0/device/power_profile" sh: echo: I/O error Exit 1 And when I try suggestions from Arch's ATI wiki my modifications are simply ignored: $ sudo cat /sys/class/drm/card0/device/power_dpm_force_performance_level auto $ sudo sh -c "echo high> /sys/class/drm/card0/device/power_dpm_force_performance_level" $ sudo cat /sys/class/drm/card0/device/power_dpm_force_performance_level auto Is this something Ubuntu specific, or something introduced with the 3.13 version of the Radeon driver? I'm encountering this on 2 laptops, one with a Radeon HD6290 (integrated GPU), the other with a discrete RV710 card. The RV710 needs a specific power setting to prevent overheating under LMDE, fortunately it doesn't seem to overheat with the Ubuntu default setting.

  Read the article

• Ubuntu 12.04 - default Radeon driver does not work at all

  - by mumble

  I've recently upgraded to 12.04 LTS and I have an ATI Radeon HD5670. I've heard that the open source 'Radeon' driver is used by default. However, it wasn't showing anything for me. What I did was I added the 'nomodeset' option to boot up and install fglrx. But it didn't work well for me as it introduced a lot of problems (freezes/glitches). So I removed/purged fglrx and am planning to use the open source drivers instead. So my question is this: Why is my default Radeon driver not working? Is anyone having a similar issue? I've also tried using the ubuntu-x-swat driver by running the ff commands: sudo add-apt-repository ppa:ubuntu-x-swat/x-updates sudo apt-get update But the result was the same as the Radeon driver. Nothing shows up on system boot. Any ideas? Thanks in advance! Update Running lspci -nn | grep VGA gives me the following: 02:00.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee ATI Redwood [Radeon HD 5670] [1002:68d8]

  Read the article

• Configuring three monitors with two Radeon X1600/X1650 graphics cards under Ubuntu

  - by cpm

  I have three SyncMaster 932a monitors I want to use with two Radeon X1600/X1650 cards under Linux. I am running X.org X Server 1.6.0, as provided by Ubuntu's Wubi installer. After turning off mirroring, I ended up with this xorg.conf: Section "Monitor" Identifier "Configured Monitor" EndSection Section "Screen" Identifier "Default Screen" Monitor "Configured Monitor" Device "Configured Video Device" SubSection "Display" Virtual 2560 1024 EndSubSection EndSection Section "Device" Identifier "Configured Video Device" EndSection The left monitor had a menu bar and a task bar, the center monitor was just desktop, and windows would maximize to the current monitor. The third monitor and second graphics card weren't being used at all. Then I changed my configuration to manually specify each card with their PCI bus: Section "ServerLayout" Identifier "TheLayout" Screen 0 "Radeon Screen 1" Screen 1 "Radeon Screen 2" RightOf "Radeon Screen 1" EndSection Section "Screen" Identifier "Radeon Screen 1" Monitor "Configured Monitor" Device "Radeon the First" SubSection "Display" Virtual 2560 1024 EndSubSection EndSection Section "Screen" Identifier "Radeon Screen 2" Monitor "Configured Monitor" Device "Radeon the Second" EndSection Section "Device" Identifier "Radeon the First" Driver "radeon" BusID "PCI:1:0:0" EndSection Section "Device" Identifier "Radeon the Second" Driver "radeon" BusID "PCI:2:0:0" EndSection Section "Monitor" Identifier "Configured Monitor" EndSection Now both the left and right monitors have task bars and menu bars. Windows cannot be dragged from the first two monitors to the third monitor. Also, maximizing in the left or center window fills both monitors. I also tried adding Option "Xinerama" "true" to the ServerLayout section. X11 wasn't able to start up. I want to: Allow moving windows along all three monitors. Maximizing only fills the current monitor. Either have menu/task bars on only the left monitor or all three monitors How can I make this possible?

  Read the article

• Configuring three monitors with two Radeon X1600/X1650 graphics cards under Ubuntu

  - by cpm

  I have three SyncMaster 932a monitors I want to use with two Radeon X1600/X1650 cards under Linux. I am running X.org X Server 1.6.0, as provided by Ubuntu's Wubi installer. After turning off mirroring, I ended up with this xorg.conf: Section "Monitor" Identifier "Configured Monitor" EndSection Section "Screen" Identifier "Default Screen" Monitor "Configured Monitor" Device "Configured Video Device" SubSection "Display" Virtual 2560 1024 EndSubSection EndSection Section "Device" Identifier "Configured Video Device" EndSection The left monitor had a menu bar and a task bar, the center monitor was just desktop, and windows would maximize to the current monitor. The third monitor and second graphics card weren't being used at all. Then I changed my configuration to manually specify each card with their PCI bus: Section "ServerLayout" Identifier "TheLayout" Screen 0 "Radeon Screen 1" Screen 1 "Radeon Screen 2" RightOf "Radeon Screen 1" EndSection Section "Screen" Identifier "Radeon Screen 1" Monitor "Configured Monitor" Device "Radeon the First" SubSection "Display" Virtual 2560 1024 EndSubSection EndSection Section "Screen" Identifier "Radeon Screen 2" Monitor "Configured Monitor" Device "Radeon the Second" EndSection Section "Device" Identifier "Radeon the First" Driver "radeon" BusID "PCI:1:0:0" EndSection Section "Device" Identifier "Radeon the Second" Driver "radeon" BusID "PCI:2:0:0" EndSection Section "Monitor" Identifier "Configured Monitor" EndSection Now both the left and right monitors have task bars and menu bars. Windows cannot be dragged from the first two monitors to the third monitor. Also, maximizing in the left or center window fills both monitors. I also tried adding Option "Xinerama" "true" to the ServerLayout section. X11 wasn't able to start up. I want to: Allow moving windows along all three monitors. Maximizing only fills the current monitor. Either have menu/task bars on only the left monitor or all three monitors How can I make this possible?

  Read the article

• 12.04 No Sound - ALC888 / Radeon 3200HD

  - by Ross

  Evening all. I have a MSI U230 netbook, MV40 processor, 4Gb RAM with integrated ATI Radeon 3200HD grahics & an ALC888 codec integrated soundcard. It has HDMI out as well. I've tried a few distro's and have been around linux for a short time. I reckon I've settled on Ubuntu 12.04 (32bit) due to it doing pretty much everything I want it to. I'm working with a fresh install right now. I recently re-installed when I was going in circles trying to solve my problem before. I install Ubuntu and it works, except for the sound. I have tried things like reinstalling Alsa, editing my asound.conf file, installing HDA Verb and a few other things. Its at the point where I need to ask for help... Some outputs: ross@ross:~$ aplay -l ** List of PLAYBACK Hardware Devices ** card 0: SB [HDA ATI SB], device 0: ALC888 Analog [ALC888 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: HDMI [HDA ATI HDMI], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 ross@ross:~$ uname -r 3.2.0-34-generic-pae ross@ross:~$ lspci | grep VGA 01:05.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI RS780M/RS780MN [Mobility Radeon HD 3200 Graphics] ross@ross:~$ lspci | grep Audio 00:14.2 Audio device: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia (Intel HDA) 01:05.1 Audio device: Advanced Micro Devices [AMD] nee ATI RS780 HDMI Audio [Radeon HD 3000-3300 Series] Added options snd-hda-intel position_fix=1 to alsa-base.conf file Unmuted all in alsamixer Can anyone suggest anything more?

  Read the article

• Debian squeeze keyboard and touchpad not working / detected on laptop

  - by Esa

  They work before gdm3 starts. a connected mouse also stops working, but functions after removal and re-plug. no xorg.conf. log doesn't show any loading of drivers for kbd/touchpad [ 33.783] X.Org X Server 1.10.4 Release Date: 2011-08-19 [ 33.783] X Protocol Version 11, Revision 0 [ 33.783] Build Operating System: Linux 3.0.0-1-amd64 x86_64 Debian [ 33.783] Current Operating System: Linux sus 3.2.0-0.bpo.2-amd64 #1 SMP Sun Mar 25 10:33:35 UTC 2012 x86_64 [ 33.783] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-0.bpo.2-amd64 root=UUID=8686f840-d165-4d1e-b995-2ebbd94aa3d2 ro quiet [ 33.783] Build Date: 28 August 2011 09:39:43PM [ 33.783] xorg-server 2:1.10.4-1~bpo60+1 (Cyril Brulebois <[email protected]>) [ 33.783] Current version of pixman: 0.16.4 [ 33.783] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 33.783] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 33.783] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Mar 28 09:34:04 2012 [ 33.837] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 33.936] (==) No Layout section. Using the first Screen section. [ 33.936] (==) No screen section available. Using defaults. [ 33.936] (**) |-->Screen "Default Screen Section" (0) [ 33.936] (**) | |-->Monitor "<default monitor>" [ 33.936] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 33.936] (==) Automatically adding devices [ 33.936] (==) Automatically enabling devices [ 34.164] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. [ 34.164] Entry deleted from font path. [ 34.226] (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/100dpi/:unscaled, /usr/share/fonts/X11/75dpi/:unscaled, /usr/share/fonts/X11/Type1, /usr/share/fonts/X11/100dpi, /usr/share/fonts/X11/75dpi, /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType, built-ins [ 34.226] (==) ModulePath set to "/usr/lib/xorg/modules" [ 34.226] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 34.226] (II) Loader magic: 0x7d3ae0 [ 34.226] (II) Module ABI versions: [ 34.226] X.Org ANSI C Emulation: 0.4 [ 34.226] X.Org Video Driver: 10.0 [ 34.226] X.Org XInput driver : 12.2 [ 34.226] X.Org Server Extension : 5.0 [ 34.227] (--) PCI:*(0:1:5:0) 1002:9712:103c:1661 rev 0, Mem @ 0xd0000000/268435456, 0xf1400000/65536, 0xf1300000/1048576, I/O @ 0x00008000/256 [ 34.227] (--) PCI: (0:2:0:0) 1002:6760:103c:1661 rev 0, Mem @ 0xe0000000/268435456, 0xf0300000/131072, I/O @ 0x00004000/256, BIOS @ 0x????????/131072 [ 34.227] (II) Open ACPI successful (/var/run/acpid.socket) [ 34.227] (II) LoadModule: "extmod" [ 34.249] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so [ 34.277] (II) Module extmod: vendor="X.Org Foundation" [ 34.277] compiled for 1.10.4, module version = 1.0.0 [ 34.277] Module class: X.Org Server Extension [ 34.277] ABI class: X.Org Server Extension, version 5.0 [ 34.277] (II) Loading extension SELinux [ 34.277] (II) Loading extension MIT-SCREEN-SAVER [ 34.277] (II) Loading extension XFree86-VidModeExtension [ 34.277] (II) Loading extension XFree86-DGA [ 34.277] (II) Loading extension DPMS [ 34.277] (II) Loading extension XVideo [ 34.277] (II) Loading extension XVideo-MotionCompensation [ 34.277] (II) Loading extension X-Resource [ 34.277] (II) LoadModule: "dbe" [ 34.277] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so [ 34.299] (II) Module dbe: vendor="X.Org Foundation" [ 34.299] compiled for 1.10.4, module version = 1.0.0 [ 34.299] Module class: X.Org Server Extension [ 34.299] ABI class: X.Org Server Extension, version 5.0 [ 34.299] (II) Loading extension DOUBLE-BUFFER [ 34.299] (II) LoadModule: "glx" [ 34.299] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 34.477] (II) Module glx: vendor="X.Org Foundation" [ 34.477] compiled for 1.10.4, module version = 1.0.0 [ 34.477] ABI class: X.Org Server Extension, version 5.0 [ 34.477] (==) AIGLX enabled [ 34.477] (II) Loading extension GLX [ 34.477] (II) LoadModule: "record" [ 34.478] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so [ 34.481] (II) Module record: vendor="X.Org Foundation" [ 34.481] compiled for 1.10.4, module version = 1.13.0 [ 34.481] Module class: X.Org Server Extension [ 34.481] ABI class: X.Org Server Extension, version 5.0 [ 34.481] (II) Loading extension RECORD [ 34.481] (II) LoadModule: "dri" [ 34.481] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so [ 34.512] (II) Module dri: vendor="X.Org Foundation" [ 34.512] compiled for 1.10.4, module version = 1.0.0 [ 34.512] ABI class: X.Org Server Extension, version 5.0 [ 34.512] (II) Loading extension XFree86-DRI [ 34.512] (II) LoadModule: "dri2" [ 34.512] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so [ 34.515] (II) Module dri2: vendor="X.Org Foundation" [ 34.515] compiled for 1.10.4, module version = 1.2.0 [ 34.515] ABI class: X.Org Server Extension, version 5.0 [ 34.515] (II) Loading extension DRI2 [ 34.515] (==) Matched ati as autoconfigured driver 0 [ 34.515] (==) Matched vesa as autoconfigured driver 1 [ 34.515] (==) Matched fbdev as autoconfigured driver 2 [ 34.515] (==) Assigned the driver to the xf86ConfigLayout [ 34.515] (II) LoadModule: "ati" [ 34.706] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so [ 34.724] (II) Module ati: vendor="X.Org Foundation" [ 34.724] compiled for 1.10.3, module version = 6.14.2 [ 34.724] Module class: X.Org Video Driver [ 34.724] ABI class: X.Org Video Driver, version 10.0 [ 34.724] (II) LoadModule: "radeon" [ 34.725] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so [ 34.923] (II) Module radeon: vendor="X.Org Foundation" [ 34.923] compiled for 1.10.3, module version = 6.14.2 [ 34.923] Module class: X.Org Video Driver [ 34.923] ABI class: X.Org Video Driver, version 10.0 [ 34.945] (II) LoadModule: "vesa" [ 34.945] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so [ 34.988] (II) Module vesa: vendor="X.Org Foundation" [ 34.988] compiled for 1.10.3, module version = 2.3.0 [ 34.988] Module class: X.Org Video Driver [ 34.988] ABI class: X.Org Video Driver, version 10.0 [ 34.988] (II) LoadModule: "fbdev" [ 34.988] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so [ 35.020] (II) Module fbdev: vendor="X.Org Foundation" [ 35.020] compiled for 1.10.3, module version = 0.4.2 [ 35.020] ABI class: X.Org Video Driver, version 10.0 [ 35.020] (II) RADEON: Driver for ATI Radeon chipsets: <snip> [ 35.023] (II) VESA: driver for VESA chipsets: vesa [ 35.023] (II) FBDEV: driver for framebuffer: fbdev [ 35.023] (++) using VT number 7 [ 35.033] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so [ 35.033] (II) [KMS] Kernel modesetting enabled. [ 35.033] (WW) Falling back to old probe method for vesa [ 35.034] (WW) Falling back to old probe method for fbdev [ 35.034] (II) Loading sub module "fbdevhw" [ 35.034] (II) LoadModule: "fbdevhw" [ 35.034] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so [ 35.185] (II) Module fbdevhw: vendor="X.Org Foundation" [ 35.185] compiled for 1.10.4, module version = 0.0.2 [ 35.185] ABI class: X.Org Video Driver, version 10.0 [ 35.288] (II) RADEON(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 35.288] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32 [ 35.288] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps) [ 35.288] (==) RADEON(0): Default visual is TrueColor [ 35.288] (==) RADEON(0): RGB weight 888 [ 35.288] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC) [ 35.288] (--) RADEON(0): Chipset: "ATI Mobility Radeon HD 4200" (ChipID = 0x9712) [ 35.288] (II) RADEON(0): PCI card detected [ 35.288] drmOpenDevice: node name is /dev/dri/card0 [ 35.288] drmOpenDevice: open result is 9, (OK) [ 35.288] drmOpenByBusid: Searching for BusID pci:0000:01:05.0 [ 35.288] drmOpenDevice: node name is /dev/dri/card0 [ 35.288] drmOpenDevice: open result is 9, (OK) [ 35.288] drmOpenByBusid: drmOpenMinor returns 9 [ 35.288] drmOpenByBusid: drmGetBusid reports pci:0000:01:05.0 [ 35.288] (II) Loading sub module "exa" [ 35.288] (II) LoadModule: "exa" [ 35.288] (II) Loading /usr/lib/xorg/modules/libexa.so [ 35.335] (II) Module exa: vendor="X.Org Foundation" [ 35.335] compiled for 1.10.4, module version = 2.5.0 [ 35.335] ABI class: X.Org Video Driver, version 10.0 [ 35.335] (II) RADEON(0): KMS Color Tiling: disabled [ 35.335] (II) RADEON(0): KMS Pageflipping: enabled [ 35.335] (II) RADEON(0): SwapBuffers wait for vsync: enabled [ 35.360] (II) RADEON(0): Output VGA-0 has no monitor section [ 35.360] (II) RADEON(0): Output LVDS has no monitor section [ 35.364] (II) RADEON(0): Output HDMI-0 has no monitor section [ 35.388] (II) RADEON(0): EDID for output VGA-0 [ 35.388] (II) RADEON(0): EDID for output LVDS [ 35.388] (II) RADEON(0): Manufacturer: LGD Model: 2ac Serial#: 0 [ 35.388] (II) RADEON(0): Year: 2010 Week: 0 [ 35.388] (II) RADEON(0): EDID Version: 1.3 [ 35.388] (II) RADEON(0): Digital Display Input [ 35.388] (II) RADEON(0): Max Image Size [cm]: horiz.: 34 vert.: 19 [ 35.388] (II) RADEON(0): Gamma: 2.20 [ 35.388] (II) RADEON(0): No DPMS capabilities specified [ 35.388] (II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 [ 35.388] (II) RADEON(0): First detailed timing is preferred mode [ 35.388] (II) RADEON(0): redX: 0.616 redY: 0.371 greenX: 0.355 greenY: 0.606 [ 35.388] (II) RADEON(0): blueX: 0.152 blueY: 0.100 whiteX: 0.313 whiteY: 0.329 [ 35.388] (II) RADEON(0): Manufacturer's mask: 0 [ 35.388] (II) RADEON(0): Supported detailed timing: [ 35.388] (II) RADEON(0): clock: 69.3 MHz Image Size: 344 x 194 mm [ 35.388] (II) RADEON(0): h_active: 1366 h_sync: 1398 h_sync_end 1430 h_blank_end 1486 h_border: 0 [ 35.388] (II) RADEON(0): v_active: 768 v_sync: 770 v_sync_end 774 v_blanking: 782 v_border: 0 [ 35.388] (II) RADEON(0): LG Display [ 35.388] (II) RADEON(0): LP156WH2-TLQB [ 35.388] (II) RADEON(0): EDID (in hex): [ 35.388] (II) RADEON(0): 00ffffffffffff0030e4ac0200000000 [ 35.388] (II) RADEON(0): 00140103802213780ac1259d5f5b9b27 [ 35.388] (II) RADEON(0): 19505400000001010101010101010101 [ 35.388] (II) RADEON(0): 010101010101121b567850000e302020 [ 35.388] (II) RADEON(0): 240058c2100000190000000000000000 [ 35.388] (II) RADEON(0): 00000000000000000000000000fe004c [ 35.388] (II) RADEON(0): 4720446973706c61790a2020000000fe [ 35.388] (II) RADEON(0): 004c503135365748322d544c514200c1 [ 35.388] (II) RADEON(0): Printing probed modes for output LVDS [ 35.388] (II) RADEON(0): Modeline "1366x768"x59.6 69.30 1366 1398 1430 1486 768 770 774 782 -hsync -vsync (46.6 kHz) [ 35.388] (II) RADEON(0): Modeline "1280x720"x59.9 74.50 1280 1344 1472 1664 720 723 728 748 -hsync +vsync (44.8 kHz) [ 35.388] (II) RADEON(0): Modeline "1152x768"x59.8 71.75 1152 1216 1328 1504 768 771 781 798 -hsync +vsync (47.7 kHz) [ 35.388] (II) RADEON(0): Modeline "1024x768"x59.9 63.50 1024 1072 1176 1328 768 771 775 798 -hsync +vsync (47.8 kHz) [ 35.388] (II) RADEON(0): Modeline "800x600"x59.9 38.25 800 832 912 1024 600 603 607 624 -hsync +vsync (37.4 kHz) [ 35.388] (II) RADEON(0): Modeline "848x480"x59.7 31.50 848 872 952 1056 480 483 493 500 -hsync +vsync (29.8 kHz) [ 35.388] (II) RADEON(0): Modeline "720x480"x59.7 26.75 720 744 808 896 480 483 493 500 -hsync +vsync (29.9 kHz) [ 35.388] (II) RADEON(0): Modeline "640x480"x59.4 23.75 640 664 720 800 480 483 487 500 -hsync +vsync (29.7 kHz) [ 35.392] (II) RADEON(0): EDID for output HDMI-0 [ 35.392] (II) RADEON(0): Output VGA-0 disconnected [ 35.392] (II) RADEON(0): Output LVDS connected [ 35.392] (II) RADEON(0): Output HDMI-0 disconnected [ 35.392] (II) RADEON(0): Using exact sizes for initial modes [ 35.392] (II) RADEON(0): Output LVDS using initial mode 1366x768 [ 35.392] (II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. [ 35.392] (II) RADEON(0): mem size init: gart size :1fdff000 vram size: s:10000000 visible:fba0000 [ 35.392] (II) RADEON(0): EXA: Driver will allow EXA pixmaps in VRAM [ 35.392] (==) RADEON(0): DPI set to (96, 96) [ 35.392] (II) Loading sub module "fb" [ 35.392] (II) LoadModule: "fb" [ 35.392] (II) Loading /usr/lib/xorg/modules/libfb.so [ 35.492] (II) Module fb: vendor="X.Org Foundation" [ 35.492] compiled for 1.10.4, module version = 1.0.0 [ 35.492] ABI class: X.Org ANSI C Emulation, version 0.4 [ 35.492] (II) Loading sub module "ramdac" [ 35.492] (II) LoadModule: "ramdac" [ 35.492] (II) Module "ramdac" already built-in [ 35.492] (II) UnloadModule: "vesa" [ 35.492] (II) Unloading vesa [ 35.492] (II) UnloadModule: "fbdev" [ 35.492] (II) Unloading fbdev [ 35.492] (II) UnloadModule: "fbdevhw" [ 35.492] (II) Unloading fbdevhw [ 35.492] (--) Depth 24 pixmap format is 32 bpp [ 35.492] (II) RADEON(0): [DRI2] Setup complete [ 35.492] (II) RADEON(0): [DRI2] DRI driver: r600 [ 35.492] (II) RADEON(0): Front buffer size: 4224K [ 35.492] (II) RADEON(0): VRAM usage limit set to 228096K [ 35.615] (==) RADEON(0): Backing store disabled [ 35.615] (II) RADEON(0): Direct rendering enabled [ 35.658] (II) RADEON(0): Setting EXA maxPitchBytes [ 35.658] (II) EXA(0): Driver allocated offscreen pixmaps [ 35.658] (II) EXA(0): Driver registered support for the following operations: [ 35.658] (II) Solid [ 35.658] (II) Copy [ 35.658] (II) Composite (RENDER acceleration) [ 35.658] (II) UploadToScreen [ 35.658] (II) DownloadFromScreen [ 35.687] (II) RADEON(0): Acceleration enabled [ 35.687] (==) RADEON(0): DPMS enabled [ 35.687] (==) RADEON(0): Silken mouse enabled [ 35.721] (II) RADEON(0): Set up textured video [ 35.721] (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 35.721] (--) RandR disabled [ 35.721] (II) Initializing built-in extension Generic Event Extension [ 35.721] (II) Initializing built-in extension SHAPE [ 35.721] (II) Initializing built-in extension MIT-SHM [ 35.721] (II) Initializing built-in extension XInputExtension [ 35.721] (II) Initializing built-in extension XTEST [ 35.721] (II) Initializing built-in extension BIG-REQUESTS [ 35.721] (II) Initializing built-in extension SYNC [ 35.721] (II) Initializing built-in extension XKEYBOARD [ 35.721] (II) Initializing built-in extension XC-MISC [ 35.721] (II) Initializing built-in extension SECURITY [ 35.721] (II) Initializing built-in extension XINERAMA [ 35.721] (II) Initializing built-in extension XFIXES [ 35.721] (II) Initializing built-in extension RENDER [ 35.721] (II) Initializing built-in extension RANDR [ 35.721] (II) Initializing built-in extension COMPOSITE [ 35.721] (II) Initializing built-in extension DAMAGE [ 35.721] (II) SELinux: Disabled on system [ 35.982] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer [ 35.982] (II) AIGLX: enabled GLX_INTEL_swap_event [ 35.982] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control [ 35.982] (II) AIGLX: enabled GLX_SGI_make_current_read [ 35.982] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects [ 35.982] (II) AIGLX: Loaded and initialized /usr/lib/dri/r600_dri.so [ 35.982] (II) GLX: Initialized DRI2 GL provider for screen 0 [ 35.999] (II) RADEON(0): Setting screen physical size to 361 x 203 [ 43.896] (II) RADEON(0): EDID vendor "LGD", prod id 684 [ 43.896] (II) RADEON(0): Printing DDC gathered Modelines: [ 43.896] (II) RADEON(0): Modeline "1366x768"x0.0 69.30 1366 1398 1430 1486 768 770 774 782 -hsync -vsync (46.6 kHz) [ 43.924] (II) RADEON(0): EDID vendor "LGD", prod id 684 [ 43.924] (II) RADEON(0): Printing DDC gathered Modelines: [ 43.924] (II) RADEON(0): Modeline "1366x768"x0.0 69.30 1366 1398 1430 1486 768 770 774 782 -hsync -vsync (46.6 kHz) [ 43.988] (II) RADEON(0): EDID vendor "LGD", prod id 684 [ 43.988] (II) RADEON(0): Printing DDC gathered Modelines: [ 43.988] (II) RADEON(0): Modeline "1366x768"x0.0 69.30 1366 1398 1430 1486 768 770 774 782 -hsync -vsync (46.6 kHz) [ 67.375] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event1) [ 67.376] (**) Logitech USB Optical Mouse: Applying InputClass "evdev pointer catchall" [ 67.376] (II) LoadModule: "evdev" [ 67.376] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 67.392] (II) Module evdev: vendor="X.Org Foundation" [ 67.392] compiled for 1.10.3, module version = 2.6.0 [ 67.392] Module class: X.Org XInput Driver [ 67.392] ABI class: X.Org XInput driver, version 12.2 [ 67.392] (II) Using input driver 'evdev' for 'Logitech USB Optical Mouse' [ 67.392] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 67.392] (**) Logitech USB Optical Mouse: always reports core events [ 67.392] (**) Logitech USB Optical Mouse: Device: "/dev/input/event1" [ 67.392] (--) Logitech USB Optical Mouse: Found 12 mouse buttons [ 67.392] (--) Logitech USB Optical Mouse: Found scroll wheel(s) [ 67.392] (--) Logitech USB Optical Mouse: Found relative axes [ 67.392] (--) Logitech USB Optical Mouse: Found x and y relative axes [ 67.392] (II) Logitech USB Optical Mouse: Configuring as mouse [ 67.392] (II) Logitech USB Optical Mouse: Adding scrollwheel support [ 67.392] (**) Logitech USB Optical Mouse: YAxisMapping: buttons 4 and 5 [ 67.392] (**) Logitech USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 67.392] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:13.0/usb5/5-1/5-1:1.0/input/input14/event1" [ 67.392] (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE) [ 67.392] (II) Logitech USB Optical Mouse: initialized for relative axes. [ 67.392] (**) Logitech USB Optical Mouse: (accel) keeping acceleration scheme 1 [ 67.392] (**) Logitech USB Optical Mouse: (accel) acceleration profile 0 [ 67.392] (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000 [ 67.392] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4 [ 67.392] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse0) [ 67.392] (II) No input driver/identifier specified (ignoring) [ 78.692] (II) Logitech USB Optical Mouse: Close [ 78.692] (II) UnloadModule: "evdev" [ 78.692] (II) Unloading evdev

  Read the article

• ATI Radeon HD 5750 and lagging in games and youtube videos

  - by Morten Fjord Christensen

  I have a X-ONE W-601 desktop pc: 3,1GHz AMD QuadCore Athlon II 645 X4 8 GB DDR3 RAM 1000 GB Harddisk 7200RPM ATI Radeon HD5750 with 1GB DDR5 RAM I'm running Ubuntu 11.10 64-bit and have installed the proprietary driver, but still games lag and videos a little bit. Been googling around and seen that it has something to do with the older drivers from AMD and KMS, but no guide helped me correctly through to make my graphic card work smoothly. I don't know if this helps but "fglrxinfo" in terminal shows: display: :0 screen: 0 OpenGL vendor string: ATI Technologies Inc. OpenGL renderer string: ATI Radeon HD 5700 Series OpenGL version string: 4.1.11005 Compatibility Profile Context And the driver check command shows: [ 51.184] (II) ATI Proprietary Linux Driver Version Identifier:8.88.7 Any help appreciated :D

  Read the article

• Radeon Open Source Drivers Configuration

  - by Andy Turfer

  How does one configure the Radeon Open Source drivers? I have just installed Ubuntu 12.10 and want to try the Open Source drivers instead of the proprietary AMD binaries. After the installation, the driver seems to be installed, I have wobbly windows working (can't use a PC without wobbly windows!), and life is generally good. I have a problem when I connect a secondary monitor. Performance is killed (everything becomes laggy and jerky) and my laptop sits on the right-hand side of the monitor, not the left. I'd like to know how to turn off the Laptop's monitor so I'm just using the external monitor. How can I do this using the Open Source Radeon drivers? I can't find a GUI management tool, and there's no longer an xorg.conf. What to do?

  Read the article

• Ubuntu 14.04 ATI Radeon open source driver with distorted video playback

  - by Bwog

  Video in VLC or SMplayer is often in black and white with washed-out colors in the wrong place (translated considerably). Moreover, the last video image is often visible when a new video is started and persist as long as the new video is running. Colors have a recognizable shape (e.g. a persons clothes or face), but can be obviously incorrect (e.g. green or purples faces). This is independent of the format of the videos (mp4, mkv, wmv). Sometimes all problems disappear when a new video is started, but often only a reboot restores normal video. Ubuntu was upgraded to 14.04 and is fully updated. Processor intel core i5-2500K cpu. gpu: amd/ati Radeon HD 7950. graphics: gallium 0.4 on AMD Tahiti. xorg xserver amd/ati display driver wrapper from xserver-xorg-video-ati. :~$ Xorg -version X.Org X Server 1.15.1 Release Date: 2014-04-13 X Protocol Version 11, Revision 0 Build Operating System: Linux 3.2.0-37-generic x86_64 Ubuntu Current Operating System: Linux Mare 3.13.0-29-generic #53-Ubuntu SMP Wed Jun 4 21:00:20 UTC 2014 x86_64 Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-29-generic.efi.signed root=UUID=number ro Build Date: 16 April 2014 01:36:29PM xorg-server 2:1.15.1-0ubuntu2 Current version of pixman: 0.30.2 ~$ lspci | grep VGA 01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Tahiti PRO [Radeon HD 7950/8950 OEM / R9 280] Question: how to restore regular video playback?

  Read the article

• Radeon HD 6850 VMware 3D Support?

  - by Matt

  I'm a new Ubuntu user (new to all of linux actually). I've installed Ubuntu 11.10 x64 and have been enjoying it, but I wanted to see how it would perform using VMware for small time gaming since I find dual booting too much of a nuisance to even bother using Ubuntu at all (sorry!). I have an Asus EAH6850 DirectCU Radeon HD 6850 graphics card and I've installed the additional ATI/AMD proprietary FGLRX graphics driver, but when I open a Windows XP 32bit machine I installed through VMware, I get this message: "The GPU driver currently installed on this host may cause issues with VMware products. If you notice any issues please disable the 3D support in the affected virtual machines." I still have 3D capabilities in the VM but they are very very choppy even running the DX tests (the spinning cube). I've seen people on youtube and other forums saying that since the new 3D acceleration in VMware 8 gaming is very possible through VMs (and I've seen them running the DX tests with the spinning cube very smoothly). I'm wondering if my graphics card isn't fully supported or if I have installed it wrong. Also when I check system info (on the host Ubuntu machine) it says "Graphics VESA:BARTS" Should my Radeon HD 6850 be showing up there? The rest of my basic system info i5 2500k 8GB 1600MHz memory Guest is running with access to all 4 cores of processor and 3gb memory assigned.

  Read the article

• Unity does not load when selecting Xorg open source radeon driver

  - by Teddy Thorpe

  When I select the X.org Radeon open source driver, Unity does not load. However, when I select the Proprietary AMD Driver from the official Ubuntu repository, Unity does load. Why is Unity doing this? I had no problems with switching between these drivers in Ubuntu 12.04 LTS. This started happening when I upgraded to Ubuntu 12.10. Before I ever installed the propriatery AMD driver, the X.org driver loaded Unity fine, but very sluggishly. I downloaded the AMD driver from their official website and installed that first and that is what started this problem. I removed that driver and went back to X.org and X.org didn't load Unity either. Then using Synaptic, I installed the AMD driver from the Ubuntu repositories and thats what I'm using now. I'm very confused why that downloaded AMD driver would effect X.org. I have a AMD Radeon HD 6620G. It's integrated graphics on my AMD A8-3500M APU (Accelerated Processing Unit as AMD advertises it).

  Read the article

• Ubuntu 12.04 does not suspend with proprietary driver for Radeon 6800

  - by Mike

  I'm running Ubuntu 12.04 x86_64 (though these issues have existed in previous releases too) and have a Radeon 6800 graphics card. I've run into issues with the open-source driver (the system would randomly hang when shutting down) so I switched to the proprietary driver (I compiled it myself using these instructions), but I am having new problems now. The main issue is that when I go into sleep mode, about 50-75% of the time, the screen goes black but the monitor does not actually shut off, and I can hear that the fans/hard drive are not suspending either. I can't get the computer to wake up (Ctrl+Alt+F1,2,3,etc. does not work), and I always end up force shutting down with the power button. I'd really appreciate help! Here is some information that might be helpful: $ fglrxinfo display: :0 screen: 0 OpenGL vendor string: Advanced Micro Devices, Inc. OpenGL renderer string: AMD Radeon HD 6800 Series OpenGL version string: 4.2.11631 Compatibility Profile Context $ dmesg | grep fglrx [...] [ 6.718606] [fglrx] module loaded - fglrx 8.96.4 [Apr 5 2012] with 1 minors [...]

  Read the article

• ATI Radeon Graphics Processing Units And ATI Radeon Drivers

  Do you like video games? Most people who are into computers do. Whether it';s a role playing game infested with monsters and treasure, or a simulator that allows you to know what flying a real airplan... [Author: Sunny Makkar - Computers and Internet - March 20, 2010]

  Read the article

• HDMI not detected Ubuntu 12.10 - ATI Radeon HD 6670

  - by Keith Wilson

  Brand new to Linux, so help a young blood out :-) (I'm a novice/hobby programmer, but completely new to Linux command syntax, etc) Brand new everything Rig. Fresh install of Ubuntu 12.10. Ubuntu installed everything and updates. I am getting VGA output and sound through standard sound port on mb. However the HDMI port on the radeon card is not recognized and not available. Any help getting this detected and usable?

  Read the article

• Need help with xorg.conf for dual Radeon HD6450 video cards with 4 monitors

  - by Eriks Goodwin-Pfister

  I am running 64-bit Ubuntu 13.10 with Unity and have dual (2) Radeon HD6450 video cards and 4 Hanns-G HL273 monitors. Each Radeon card is driving one monitor via DVI and the other via VGA. I am running the proprietary video drivers from AMD's web site: "amd-catalyst-13.11-beta V9.4-linux-x86.x86_64.run" I tried to use "amd-catalyst-13.12-linux-x86.x86_64.run" but could not get that newer version to install. What I need help with is how to "correct" my xorg.conf file and any other needed instructions to get all four of my monitors to work as a continuous desktop that allows me to drag things from one monitor to the next, etc. When I tried to use the default open source drivers that came in Ubuntu 13.10, only three of the monitors would work. Now that I am running the proprietary ones, all four monitors come on and I can move my mouse from one end to the other--but only the right-most monitor displays my desktop and allows me to "do anything". Any time I move my mouse to any of the other three monitors (which display all-white), it turns into an "X" and does not do anything else but move. Enabling xinerama makes all four displays go all-black after login. I do have amdcccle installed, but it does not seem to have the ability to handle my particular configuration. My Current xorg.conf: Section "ServerLayout" Identifier "Basic Layout" Screen 0 "Screen1" 5760 0 Screen 1 "Screen0" 0 0 Screen 2 "Screen2" 3840 0 Screen 3 "Screen3" 1920 0 EndSection Section "Module" EndSection Section "Monitor" Identifier "0-DFP2" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "PreferredMode" "1920x1080" Option "TargetRefresh" "60" Option "Position" "0 0" Option "Rotate" "normal" Option "Disable" "false" EndSection Section "Monitor" Identifier "0-CRT1" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "PreferredMode" "1920x1080" Option "TargetRefresh" "60" Option "Position" "0 0" Option "Rotate" "normal" Option "Disable" "false" EndSection Section "Monitor" Identifier "1-DFP2" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "PreferredMode" "1920x1080" Option "TargetRefresh" "60" Option "Position" "0 0" Option "Rotate" "normal" Option "Disable" "false" EndSection Section "Monitor" Identifier "1-CRT1" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "PreferredMode" "1920x1080" Option "TargetRefresh" "60" Option "Position" "0 0" Option "Rotate" "normal" Option "Disable" "false" EndSection Section "Device" Identifier "Device0" Driver "fglrx" Option "Monitor-CRT1" "1-CRT1" BusID "PCI:1:0:0" EndSection Section "Device" Identifier "Device1" Driver "fglrx" Option "Monitor-DFP2" "0-DFP2" BusID "PCI:4:0:0" EndSection Section "Device" Identifier "Device2" Driver "fglrx" Option "Monitor-DFP2" "1-DFP2" BusID "PCI:1:0:0" Screen 1 EndSection Section "Device" Identifier "Device3" Driver "fglrx" Option "Monitor-CRT1" "0-CRT1" BusID "PCI:4:0:0" Screen 1 EndSection Section "Screen" Identifier "Screen0" Device "Device0" DefaultDepth 24 SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen1" Device "Device1" DefaultDepth 24 SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen2" Device "Device2" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen3" Device "Device3" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection

  Read the article

• Which driver for ATI Radeon 9600 All-In-Wonder

  - by vanja

  I'm very new to Ubuntu and Linux for that matter, and wondering if anyone there found proper drivers for ATI Radeon 9600 All-In-Wonder. The system (Ubuntu 12.04) doesn't let me change screes resolution and it's not recognizing the card.. I found this page http://wiki.cchtml.com/index.php/Hardware that shows some info but i'm really confused where to start and if it's possible at all to make everything work. Any help would be really appreciated. Thanks in advance!! -vanja

  Read the article

• 11.04 radeon screen tearing oddity

  - by Kevin Qiu

  I have a mobility radeon 5850 running 11.04 and am running catalyst 11.10 drivers. I noticed that whenever I have two windows open, one of top of the other, scrolling results in minor screen tearing, usually around the border of the window on the bottom. When I minimize or close the bottom the tearing goes away. I have tear free desktop enabled and tried looking for this specific issue but couldn't find anyone else with it. It happens in both Unity and Classic. Is there any fix for this?

  Read the article

• Screen tearing oddity when one window is on top of another with Radeon

  - by Kevin Qiu

  I have a mobility radeon 5850 running 11.04 and am running catalyst 11.10 drivers. I noticed that whenever I have two windows open, one of top of the other, scrolling results in minor screen tearing, usually around the border of the window on the bottom. When I minimize or close the bottom the tearing goes away. I have tear free desktop enabled and tried looking for this specific issue but couldn't find anyone else with it. It happens in both Unity and Classic. Is there any fix for this?

  Read the article

• How to install Radeon Open Source Driver?

  - by Clintonio

  I have an MSI Radeon HD 7850 card. MSI provide no Linux support, and the AMD driver gives me an Unsupported Hardware watermark that does not show up in screenshots. I uninstalled the proprietary driver and found that Unity 3D no longer works, and I really only picked Ubuntu because of the excellent shortcuts provided in the recent versions. Trying to locate the open source driver has been a pain for me. According to the documentation I have read it is pre-included in Ubuntu 12.04, yet there is no Unity 3D support. I tried using the newest drivers from AMD's website, but that also had the watermark. Does anyone know how I can get the open source driver? If not, does anyone know how to remove the watermark. I'm on the verge of going back to Windows.

  Read the article

• Scrambled screen on 12.04 with Radeon HD 7670M/2GB when scrolling the page

  - by Mihkel

  I have Ubuntu 12.04 LTS 64 bit and I have installed proprietary drivers for my Radeon HD 7670M with 2GB memory. But if I scroll page or do anything like move a window then I get blurred screen (more like scrambled maybe) for a second and if I try to take PrtScr of it, it is goes to normal. I have tried other drivers and it does not solve my problem. And I do not want to go over 32 bit Ubuntu because I have 6 GB ram and I would lose so much of it. Also if it helps, my processor is Intel® Core™ i5-3210M CPU @ 2.50GHz × 4.

  Read the article

1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >