Search Results

Search found 45 results on 2 pages for 'timo'.

Page 1/2 | 1 2  | Next Page >

  • Space (and pipe sign) works on occasion only

    - by Timo Riikonen
    I have an issue that when I try to write pipe sign "|" and space after that, I sometimes get wrong type of space (\240) and my command fails. This issue persists on different shells. How could I fix this? I am using Finnish keyboard layout. timo@timo-i7-ubuntu:~$ ps -ef | grep ruby timo 7169 2633 0 12:12 pts/2 00:00:00 ruby1.9.1 /usr/local/bin/rails new admin4 timo 8736 26515 0 14:22 pts/4 00:00:00 grep --color=auto ruby timo@timo-i7-ubuntu:~$ ps -ef | grep ruby No command ' grep' found, did you mean: Command 'igrep' from package 'openimageio-tools' (universe) Command 'dgrep' from package 'debian-goodies' (main) Command 'rgrep' from package 'grep' (main) Command 'zgrep' from package 'gzip' (main) Command 'zgrep' from package 'zutils' (universe) Command 'sgrep' from package 'sgrep' (universe) Command 'lgrep' from package 'lv' (universe) Command 'egrep' from package 'grep' (main) Command 'ngrep' from package 'ngrep' (universe) Command 'grep' from package 'grep' (main) Command 'agrep' from package 'agrep' (multiverse) Command 'pgrep' from package 'procps' (main) Command 'xgrep' from package 'xgrep' (universe) Command 'vgrep' from package 'atfs' (universe) Command 'fgrep' from package 'grep' (main)  grep: command not found timo@timo-i7-ubuntu:~$ cat pipecom ps -ef | grep rails timo@timo-i7-ubuntu:~$ cat pipecom2 ps -ef | grep rails timo@timo-i7-ubuntu:~$ ./pipecom timo 7169 2633 0 12:12 pts/2 00:00:00 ruby1.9.1 /usr/local/bin/rails new admin4 timo 8777 8775 0 14:26 pts/4 00:00:00 grep rails timo@timo-i7-ubuntu:~$ ./pipecom2 ./pipecom2: line 1: $'\302\240grep': command not found timo@timo-i7-ubuntu:~$ diff -w pipecom pipecom2 1c1 < ps -ef | grep rails --- > ps -ef | grep rails

    Read the article

  • How to configure 2nd network card for use in VMWare Workstation?

    - by Timo
    Hi all, I am using VMWare Workstation 6.5, connected to my network with a bridged adapter so that the virtual machine OS (Windows XP) has its own IP adress. This just worked out of the box. Now my host machine (Windows Vista) has an additional network card that is directly connected to another computer using a crossover cable (and fixed IP adress 10.1.1.4, while the "main" network connection is using DHCP with IP in the 192.68.0.* range). How can I use that network connection as well in the virtual machine? Do I need to bridge my 2nd network adapter to some VMnetX adapter? Do I need to add a host virtual adapter? I do not know much about networks, and the VMWare network settings really confuse me :-) Thanks, Timo

    Read the article

  • SEO effect of “You are leaving this site” page for outbound links?

    - by Timo Huovinen
    The problem I am working on an aggregation website that collects reviews about specific products from various websites. The site has many thousands of outbound links (with "nofollow" attributes) to the content source websites where the reviews were collected from. The site has far more outbound links than inbound links and I have read that this is bad for SEO. The question Would adding an intermediate «You are leaving this site» disclaimer/warning page like this hurt search engine rankings? And can you provide any links about this topic? p.s. The exit page would be a POST form instead of a script, that notifies the user that he/she is leaving this site and provides a button to continue to the other website. p.p.s This kind of idea is implemented on many forums, aggregation websites with the purpose of warning the user that he/she is leaving this site and to block search engine bots from following those links because search bots do not submit forms.

    Read the article

  • Difference in fans on Windows 7 and Ubuntu 12.04

    - by Timo
    I have bought a Hp Pavilion DV7 with Core i7 CPU and installed Ubuntu 12.04 on dual boot with Windows 7 alongside. Apart from the difference in battery life (although that's fixed with Jupiter), I have another problem with the fans. On Windows my fans work perfectly and the laptop is cool, but it seems to overheat in Ubuntu. It becomes quite hot and it looks like my fans are not working under Ubuntu. I think I'm having the same problem as How can I keep the cpu temp low?, but since I cannot comment because of the lack of reputation (?), I post the question as a new thread. I think the result of the overheating is that my keyboard doesn't seem to follow when I start typing a long text. It just freezes and types the last letter multiple times. For example: when I type the word freezes, it shows freeeee so the zes changed into eee...

    Read the article

  • forward sudo verification

    - by Timo Kluck
    I often use the following construct for building and installing a tarball: sudo -v && make && sudo make install which will allow me to enter my password immediately and have everything done unattended. This works well except in the rare case that building takes longer than the sudo timeout, which may happen on my rather slow machine with large projects (even when using make -j4). But when the build takes a long time, that's exactly when doing things unattended has a great advantage. Can anyone think of a shell construct that allows me to input my password immediately, and which has make executing under normal permissions and make install under elevated permissions? For security reasons, I don't want to configure my user to use sudo without password. A viable option is to set the timeout to very long, but I'm hoping for something more elegant.

    Read the article

  • Recommended SpamAssassin update channels?

    - by Timo Geusch
    I'm currently using SpamAssassin on a couple of mail servers that I look after. SpamAssassin runs in the context of amavisd-new on those servers and with the usual bunch of plugins (FuzzyOCR, DCC, pyzor, razor). Currently the servers are getting their rule updates from the default SpamAssassin update channel (updates.spamassassin.org). Overall the setup seems to be reasonably effective but some types of spam seem to wander right through it even though I've made repeated attempts at training spamassassin. My guesstimate is that about 85%-90% of the spam that gets through policyd-weight makes it through the filters and it's been getting a lot worse recently as spammers are getting better at working their way through filters. Can someone recommend additional sources of filters to make SpamAssassin more effective? So far I've found OpenProtect's update channel but are there others worth looking at?

    Read the article

  • Specifying --host1 as localhost with port 8983 in autobench

    - by mamatha
    I am using autobench for benchmarking in ubuntu 8.10 autobench --single_host --host1 localhost --uri1 /solr/admin --low_rate 20 --high_rate 200 --rate_step 20 --num_call 10 --num_conn 5000 --timeout 5 --file bench1.tsv This is the command which I gave. It is taking the default port as 80 and the number of replies and requests are as shown below **Errors: total 5000 client-timo 0 socket-timo 0 connrefused 5000 connreset 0 Errors: fd-unavail 0 addrunavail 0 ftab-full 0 other 0 Zero replies received, test invalid: rate 20 httperf --timeout=5 --client=0/1 --server=localhost --port=80 --uri=/solr/admin --rate=40 --send-buffer=4096 --recv-buffer=16384 --num-conns=5000 --num-calls=10 Maximum connect burst length: 4 Total: connections 5000 requests 0 replies 0 test-duration 124.976 s** But, I want the port to be 8983. In all the examples that I have seen in the autobench tutorial, --host1 is a website (such as, www.test.com). Can anyone suggest how to use localhost taking the port as 8983? Thanks, in advance.

    Read the article

  • In Debian, how can I route rtorrent to a certain network interface, say ppp0?

    - by Timo
    I have purchased a PPTP account from StrongVPN and configured the setup by these (http://pptpclient.sourceforge.net/howto-debian.phtml#configure_by_hand) instructions and now I want to have rtorrent do its communication to the Internet through this VPN tunnel. So I have a ppp0 interface, which has the VPN tunnel. What is the next step? I guess it has something to do with the routing tables? I am new to routing, so please be elementary and precise so that I understand! Thank you!

    Read the article

  • Assign two static IP addresses to one mac address

    - by Timo Ylikännö
    Can Isc-dhcp-server give two static ip addresses to one mac address? I have several home terminals in my network. Each terminal have two interfaces. One for public traffic and one for a management traffic. Both interfaces have same mac address. DHCP server can detect interfaces via dhcp option field and dhcp class declarations. Every terminal have to have static ip address instead of dynamic address. With dynamic address and dynamic pools this would be an easy task. Or is there any dhcp server that can do this?

    Read the article

  • What to use as a file server with a web interface and user management on MAMP

    - by Timo
    I want to set up file/photo sharing for a largish group of friends and family. Flickr, Picasa etc. are not optimal solutions because setting up accounts, sharing albums and navigating privacy settings is going to be overwhelming for some of the people. I just want to be able to give people a URL, a username, and password and have it be easy peasy. I want something very simple and easy to use (for the user) like MyTunesRSS. I've looked at a complete "social" solution like Elgg but that feels like using a cadillac to kill a fly. I only need: User management Simple upload / download of files Plug-into-MAMP ease of setup is a bonus Search / metadata / tags / commenting not necessary but also earns bonus points Free / cheap licence What would you recommend?

    Read the article

  • In Debian, how can I route rtorrent to a certain network interface, say ppp0?

    - by Timo
    I have purchased a PPTP account from StrongVPN and configured the setup by these (http://pptpclient.sourceforge.net/howto-debian.phtml#configure_by_hand) instructions and now I want to have rtorrent do its communication to the Internet through this VPN tunnel. So I have a ppp0 interface, which has the VPN tunnel. What is the next step? I guess it has something to do with the routing tables? I am new to routing, so please be elementary and precise so that I understand! Thank you!

    Read the article

  • PC powers off at random times

    - by Timo Huovinen
    Short Version After experiencing some problems with Mobo batteries my PC started to power off at random times, the power off is instant and sudden and does not restart afterwards, need help figuring out the cause. Facts: Powers off when PC is playing games Powers off when PC is idle Powers off when PC is in safe mode Powers off when PC is in BIOS Powers off when PC is booted through a Windows installation USB Replaced the motherboard battery several times Replaced the 650W PSU with a 750W PSU Replaced the RAM Swapped the RAM between slots Re-applied thermal paste to the CPU Checked if the motherboard touches the case Nothing is overclocked PC Specs PC specs: OS: Windows 7 Ultimate SP1 RAM: klingston 1333MHz 4GB stick CPU: AMD Phenom II x4 955 Mobo: Gigabyte 88GMA-UD2H rev 2.2 Motherboard battery: CR2032 3v HDD: 500GB Seagate ST3500418AS ATA Device Graphics: ATI/AMD Radeon HD 6870 Very Long version Around 10 months ago I built a brand new gaming PC. Around 6 months ago it's time setting in windows started resetting to the year 2010. I swapped the Motherboard battery for a new one of the exact same size and shape and voltage, and the problems disappeared...for around 2 weeks. Then the same problem happened again, time gets reset, I swapped the battery again, and the problem was gone for good and everything was great for about 3 months.. then another problem started happening, the PC started to power off suddenly and without warning at completely random times, sometimes the PC works for and hour, sometimes 5 minutes. So I read on the forums that it might be either the PSU or the motherboard Battery or RAM or HDD or the Graphics card or the CPU or the motherboard or the drivers or a Virus or Grounding issues, or something short circuiting, basically it can be anything... I spent some days researching, and decided to remove the possibility of a virus. I reset the CMOS, cleared all BIOS settings and reinstalled windows 7 after a full format of the HDD, but the random power off kept happening. I then disabled the restart on error option in windows and looked at the event log for error events, but they did not help me figure out the problem. Network list service depends on network location awareness the dependency group failed to start Source Kernel Power Event 41 Task Category 63 Source Disk Event ID 11 Task Category None The driver detected a controller error on device disk I took apart the PC, every little piece, re-applied some expensive thermal paste to the CPU, and double checked that none of the pieces are touching the PC case. The problem was gone, the PC no longer powered off randomly I re-attached the graphics card and all was good for 4 months... then the power off problem appeared again, but was happening at high intervals, the PC would shutdown once in 2 days on average, at random points in time, sometimes when it's idle all day long, sometimes when it's running CRYSIS 2. I checked the CPU temperature, because I know that AMD CPU's have a built in protection mechanism that switches off the PC if the CPU gets too hot, and the Temp was 50C system temp, and 45C CPU after running the PC all day long (I did not do tests to see if there are any temperature spikes, don't know how to do them) Originally the PSU that powered the PC was 650Watts and had one 4 pin cable to power the CPU, I replaced it with a new 750Watts PSU which has two 4 pin cables for the CPU, but the problem remained. I removed the graphics card and let the motherboard use the built in one, but the PC kept suddenly powering off at random times. I took apart the PC completely again, and re-applied thermal paste to the CPU, added lots of insulation, and checked for any type of short-circuit possibility again and again, but the problem remained. The problem was like that for some months. I replaced the Battery a couple of times over the time, changed lots of options in windows, and tried everything I could, but it kept powering off, so I stopped using the PC as much as I used to, just living with the random power offs from time to time, until a couple of days ago, when the power off happens almost immediately after powering on the PC. I replaced the RAM with a brand new one, but that did not help. Took apart the PC again, checked for anything anywhere that might cause it, found some small scratches on the very edge of the motherboard to the left of the PCI express x16 slot. This might cause the problem, I thought, but the scratch looks very superficial, not deep at all, and if the scratch did harm the motherboard, wouldn't it cause it to not start at all? And why did it start to power off a while ago, and then suddenly stop powering off? The scratches could not have vanished??? did chkdsk \d but it powered off when it was at 75% I removed the hard disks, the graphics card, while I fiddled with the BIOS settings, and suddenly the PC shut down while I was looking at the BIOS version. This makes me realize, it is not caused by: HDD, Windows, Drivers or the Graphics card I cleared the CMOS again, updated the BIOS from F5 to F6f beta, but that did not help, it might even seem that the PC powers off even sooner. The shutdown even happened to me while I booted through a windows 7 installation USB and was in the repair console. I removed one of the cables powering the CPU, now only one 4pin cable powers it, and it worked for 30mins after doing that, which makes me think that it's the CPU overheating, and because it gets less power, it overheats slower? The things that I am still considering: CPU overheating (does not seem to overheat, maybe false readings?) Motherboard short circuiting (faulty motherboard?) I desperately need some advice in what is faulty, is it a faulty Motherboard or an overheating CPU? or maybe something else? I have been breaking my head over this problem over a span of 6 months. I'm not sure if this is a good place to ask this question, if it is not, then tell me where I can get some experienced help. More info I have also discovered a mysterious piece that seems to have fallen out of the motherboard i119.photobucket.com/albums/o126/yurikolovsky/strangepiece.jpg What is it? Looks like each time that it powers off the datetime gets reset I also found another forum post tomshardware.co.uk/forum/… except I don't have Integrated PeripheralsUSB Keyboard Function option in BIOS :S Comments summary (asked by Random moderator) Q. tell me, if the computer restarts, is it immediately? Does it take a second and then restarts? Do you see (BSOD) or hear (PSU, short circuit) any suspicious when it happens? After reading trough it, it remains the mainboard that is faulty. – JohannesM A. Immediate power off, all the fans stop instantly, all the light turn off instantly, no sound or anything, and it remains off until I turn it back on. Thanks for the feedback, faulty motherboard is what I fear. Q. Try stress-testing the system with Prime95 and see if errors or shutdowns occur when the CPU is under full load. – speakr A. Prime95 heat stress test peaked CPU heat at 60C after 5mins, it powered off after 30mins of testing in the middle of the test with no errors, Prime95 Heat test or the stress-testing with low RAM usage (small or in-place FFTs) do not report errors while testing for 10-60 mins. The power off does not seem like it is affected by Prime95 at all Makes me wonder if it's a CPU or Motherboard issue at all. Q. I had similar random/intermittent problems with my old board. It gave one of a few different symptoms: keyboard and/or mouse would die and/or the RAM wouldn't work and/or it would shut down. It was in bad shape. One problems was that my old PSU had literally burned the connector on it (browned around the pins), another was that a broken lead inside the layers of the PCB would work sometimes if it happened to be hot or if I bent the board—by jamming a hunk of wood behind it. I managed to keep the board alive for several years, but eventually nothing I did would make it work correctly anymore. – Synetech A. I will try that as the last resort, ok? ;) Q. Have you tried a different power cord, surge protector, outlet (on a different circuit). It's worth a shot just to ensure it's not subpar wiring or a week circuit (dips in power may cause shutdown if the PSU can't pull enough juice from the wall). – Kyle A. yes, I attached the PC to an entirely different outlet on a different circuit and the problem persists. After connecting it to a different outlet after starting the PC it gave me 3 long beeps and 1 short one, then the PC immediately proceeded to boot up normally. Q. Re-check your mainboard manual and all PSU connections to your mainboard to be sure that nothing is missing (e.g. 12V ATX 4-pin/6-pin connector). If you can provoke shutdowns with Prime95, then consider buying new hardware -- a stable system should run Prime95 for 24h without any errors. Prime95 mentions errors in the log when they occur and gives a summary after the stress test was stopped manually (e.g. "0 errors, 0 warnings", if all is fine) – speakr A. Re-checked, there are no more PSU connectors that I can physically connect, except the one ATX 4-pin (there are 2 that power the CPU) that I disconnected on purpose, I have reconnected it but the problem persists. Q. With one PC I had a short curcuit. The power button on the front plate had its cables soldered, but not isolated, and the contacts were very close to the metal case. A heavier touch was enough to cause a shutdown. The PC's vibration could be enough – ott-- A. yes, it seems to switch off with even the lightest touch, I switched on the PC, then pulled out the front panel power cable that connects to the motherboard so the power button does not work anymore, after 5 mins of working like that, with the power button completely disconnected, just sitting idle, the PC powered off again, I don't think it's the power button. Q. I wonder if you dare to operate components without the case, that is remove motherboard, power, disk ( just put the motherboard on a wooden desk). Don't bend the adapters when running like that. – ott-- A. yes, I do dare to do that, but only tomorrow, too tired/late right now.

    Read the article

  • Hosting provider that allows you to host your own VM image?

    - by Timo Geusch
    I've already looked at the 'Best Hosted VM Provider' question and checked the recommendations there, but I seem to have slightly odd requirements. Basically, I am looking for a host that allows me to host a VM image I supply (FreeBSD, which most of the suggested hosters don't support, they only seem to support various Linuxes) instead of one of their standard images. I'm a long time BSD user and have had colo BSD servers in the past so I'm pretty sure that i don't need much in the way of software support, but I'd basically like to run my server on managed hardware without having to rent the whole server. For the usage I have that would way OTT as we're talking a couple of small apps with very few users, a couple of blogs and (most importantly) email hosting for about 6-10 domains with moderate traffic levels. Oh, and reliability trumps cost to a certain extent.

    Read the article

  • Client certificate based encryption

    - by Timo Willemsen
    I have a question about security of a file on a webserver. I have a file on my webserver which is used by my webapplication. It's a bitcoin wallet. Essentially it's a file with a private key in it used to decrypt messages. Now, my webapplication uses the file, because it's used to recieve transactions made trough the bitcoin network. I was looking into ways to secure it. Obviously if someone has root access to the server, he can do the same as my application. However, I need to find a way to encrypt it. I was thinking of something like this, but I have no clue if this is actually going to work: Client logs in with some sort of client certificate. Webapplication creates a wallet file. Webapplication encrypts file with client certificate. If the application wants to access the file, it has to use the client certificate. So basically, if someone gets root access to the site, they cannot access the wallet. Is this possible and does anyone know about an implementation of this? Are there any problems with this? And how safe would this be?

    Read the article

  • Cannot load from mysql.proc

    - by Timo Schneider
    I can not dump my MySQL-Databeses, however here's the error message: Cannot load from mysql.proc. The table is probably corrupted Also mysql_upgrade seems not to work: # mysql_upgrade Looking for 'mysql' as: mysql Looking for 'mysqlcheck' as: mysqlcheck Running 'mysqlcheck with default connection arguments mysqlcheck: Got error: 1045: Access denied for user 'root'@'localhost' (using password: NO) when trying to connect FATAL ERROR: Upgrade failed What does that mean ?

    Read the article

  • In Enterprise Architect I modified an interface, how to update the realizing classes?

    - by Timo
    I've created an interface in a class model. This interface has two methods, A and B and method A takes an argument (a) and method B does not take an argument (yet). Additionally I've created a class that implements this interface, overriding both methods. After a discussing the model method B now should also take a parameter (b), so I modified the interface to reflect this change. However the class realizing this interface is not updated automatically. For one class it's possible to add the method by re-creating the link between the interface, specify the which method should be implemented and deleting this link again. Then the OLD method signature has to be removed as well. This is a lot of work if there is more then one class implementing the modified interface, not to mention error-prone. Does anybody know how to make an entire class model update this type of dependency?

    Read the article

  • How to setup Database Permissions on SqlServer Express 2008

    - by Timo Willemsen
    I'm using a code-first approach of using the Entity Framework. When I first run the application it will try to create the database matching my MVC models. However, it doesn't have permission to create it I think. I get the following error: CREATE DATABASE permission denied in database 'master'. What user is trying to access the SqlServer and how can I add it's permissions to let it work? This is the connectionstring I'm using (which should be right...) <add name="ContextDb" connectionString="data source=.\SQLEXPRESS;Integrated Security=SSPI;initial catalog=ContextDb" providerName="System.Data.SqlClient"/> Cheers

    Read the article

  • How to compress / reduce the size of JPEG photos for archiving?

    - by Timo Huovinen
    I have 50,000 high resolution JPEG photos, where a couple of them might occasionally be needed, about once a year. I wanted to zip them to save disk space, except that zipping gives no space benefit - so trying to reduce the images disk usage using winzip, winrar or 7zip was not successful. Is there any software or algorithm similar to zip to compress image size on hard disk for storage without loosing any image information?

    Read the article

  • How to get wireless working (properly) with Sitecom Wireless USB micro adapter 300N on Windows 7?

    - by Timo
    The question says it all, but more detail follows ;) I've got a new computer that runs Windows 7 64-bits (Home Edition) and I'd like to connect it to my wireless home network (Sitecom wireless gigabit router 300N wl-352 v1 002) with a Sitecom wireless USB micro adaptapter 300 wl-352 V2 001. After installing the router (i.e. connected to the modem and power) and ensuring that wireless is indeed enabled, I've installed the driver of the USB adapter on the new computer described above. After the installation (drivers and utility on CD) completes successfull I rebooted my computer and inserted the USB adapter. After discovering the right network and connecting to it using the network key, a connection is succesfully made. (Using the Sitecom 300N USB Wireless LAN utility). In the LAN utility I can see that the signal strength is approximately 50% and connection quality is approximately 80%. Judging from these numbers I assumed that all was fine and started to use the connection (reading news on nu.nl, a dutch news site), but noticed that the connection was lost several times in a very short time span, but each time the connections was resumed, resulting in the 50/80 percent numbers described above. However, the website was not loaded completely and often a timeout would be reported. When inspecting the drivers through Device Management (Windows' Apparaatbeheer in dutch) there were no errors/warnings; everything seemed to be in order. In an attempt to solve this, I downloaded the latest drivers for the USB adapter, but the problems remained. Finally I tried to connect the computer with a Siemens Gigaset USB Adapter 108. This process was a troublesome since I had to download a driver (from the site above) and tell Windows (7) to use the Windows Vista driver when installing the new hardware, since there is (was) no Windows 7 driver available. This resulted in a usable connection, although not very stable when reconfiguring the router. Which took the form of selecting a different wireless channel on the router, even using the Sitecom utility mentioned above to check if there were other networks communicating on that channel (and thus picking a channel that was not used by other networks). Again no result when changing back to the Sitecom USB adapter. Note that this means (I think) that I could use the internet connection with the Siemens adapter, meaning the problem was not in the router. So: How to get wireless working (properly) with Sitecom Wireless USB micro adapter 300N on Windows 7? PS Sorry, but should be able to post one link, while I had links in place for the USB adapter, router and the siemens adapter in place as well, but I'm not (yet) allowed to post these... (The site says I can post one link, but only when no links are present will it allow me to post the question...)

    Read the article

  • ArchBeat Link-o-Rama for July 2, 2013

    - by Bob Rhubart
    One Week To Go: OTN Architect Day: Cloud Computing - July 9, 2013, Redwood Shores, CA. The first OTN Architect Day event of 2013 happens in just one week, on Tuesday July 9 at the Oracle Conference Center in Redwood Shores, CA. Registration is free and you get three sessions by three experts on cloud computing in the real world — plus a panel Q&A for answers to all of your questions. Register now! Oracle Database 12c: Flashback Moving Forward | Lucas Jellema Oracle ACE Director Lucas Jellema's latest of several recent blog posts dealing with various aspects of the recently released Oracle Database 12c. Detroit, Embracing New Auto Technologies, Seeks App Builders This story from the New York Times paints a rosy picture indeed for app developers as the internet of things continues to evolve. Advanced View Criteria Implementation in ADF BC | Andrejus Baranovskis Oracle ACE Director Andrejus Baranovskis' post focuses on advanced declarative View Criteria features. JDeveloper: Showing a Popup when Selecting an af:selectOneRadio | Timo Hahn Oracle ACE Timo Hahn illustrates a use case in which a popup is displayed each time the user clicks on one of the radio buttons of a button group. Can Technology Innovation Save The New York Times? One of the standout keynotes from the recent QCon New York event, this presentation by New York Times Sr. VP/CIO Marc Frons and CTO/VP Rajiv Pant paints a detailed portrait of the complete transformation of an organization -- not just the IT. Enterprise architects will find this particularly interesting. Video: Meet Growing IT Demand for Databases with Private DBaaS Do you understand the difference between traditional database deployment and database as a service? If not, you'll want to check out this video, which includes an overview of Oracle Enterprise Manager's capabilities for rapid deployment of DBaaS. S Webcast: Zero-Downtime Migration to Oracle Exadata Using Oracle GoldenGate: A Customer Case Study Presenters Alok Pareek (VP, Product Management/Development, Oracle Data Integration) and John F. Martin (CEO of Emerging Markets and CTO IQNavigator) discuss how IQNavigator is using Oracle GoldenGate with Oracle Exadata. Free eBook: Building a Database Cloud for Dummies This free quick-reference guide, organized into six short chapters and supplemented with helpful illustrations, provides a clear overview of the cloud and step-by-step instructions on deploying database as a service. (Registration required.) Thought for the Day "My motto is: Live every day to the fullest – in moderation." — Lindsay Lohan (Born July 2, 1986) Source: brainyquote.com

    Read the article

  • Import Eclipse Plugin

    - by Timo
    Hey everybody, I developed an Eclipse plugin (a view) using the plugin development version of Eclipse. I exported the plugin as a jar archive and now I would like import it in another version of Eclipse, but it doesn't recognize the plugin. This is my first plugin so I might have forgotten something obvious. I searched the internet for hours but didn't find anything. Does anybody know what else I have to do? Btw, the dependencies of my plugin are: org.eclipse.ui, org.eclipse.core.runtime, org.eclipse.core.filesystem, edu.tum.cs.eclipse.commons, org.eclipse.ui.ide, org.eclipse.core.resources The version I'd like to import it in is the default Eclipse for PHP Developers from eclipse.org. The feature list can be found on http://www.eclipse.org/downloads/packages/eclipse-php-developers/galileosr2 Thanks for you help!

    Read the article

  • What is in your Mathematica tool bag?

    - by Timo
    We all know that Mathematica is great, but it also often lacks critical functionality. What kind of external packages / tools / resources do you use with Mathematica? I'll edit (and invite anyone else to do so too) this main post to include resources which are focused on general applicability in scientific research and which as many people as possible will find useful. Feel free to contribute anything, even small code snippets (as I did below for a timing routine). Also, undocumented and useful features in Mathematica 7 and beyond you found yourself, or dug up from some paper/site are most welcome. Please include a short description or comment on why something is great or what utility it provides. If you link to books on Amazon with affiliate links please mention it, e.g., by putting your name after the link. Packages: LevelScheme is a package that greatly expands Mathematica's capability to produce good looking plots. I use it if not for anything else then for the much, much improved control over frame/axes ticks. David Park's Presentation Package ($50 - no charge for updates) Tools: MASH is Daniel Reeves's excellent perl script essentially providing scripting support for Mathematica 7. (This is finally built in as of Mathematica 8 with the -script option.) Resources: Wolfram's own repository MathSource has a lot of useful if narrow notebooks for various applications. Also check out the other sections such as Current Documentation, Courseware for lectures, and Demos for, well, demos. Books: Mathematica programming: an advanced introduction by Leonid Shifrin (web, pdf) is a must read if you want to do anything more than For loops in Mathematica. Quantum Methods with Mathematica by James F. Feagin (amazon) The Mathematica Book by Stephen Wolfram (amazon) (web) Schaum's Outline (amazon) Mathematica in Action by Stan Wagon (amazon) - 600 pages of neat examples and goes up to Mathematica version 7. Visualization techniques are especially good, you can see some of them on the author's Demonstrations Page. Mathematica Programming Fundamentals by Richard Gaylord (pdf) - A good concise introduction to most of what you need to know about Mathematica programming. Undocumented (or scarcely documented) Features: How to customize Mathematica keyboard shortcuts. See this question. How to inspect patterns and functions used by Mathematica's own functions. See this answer How to achieve Consistent size for GraphPlots in Mathematica? See this question.

    Read the article

  • Hibernate ResultTransformer with JPA API

    - by Timo Westkämper
    Has anyone figured out a smart way to do query result transformation through a similar mechanism like specifying a ResultTransformer in Hibernate? All I can think of is transforming each result row after it has been returned by the Query. Is there any other way? For constructor projections (e.g. new DTO(arg1, arg2)) it can be defined in the JPQL query, at least for Hibernate, but how about other cases?

    Read the article

  • Null check error message as "is null" or "was null"

    - by Timo Westkämper
    When doing null checks in Java code, and you throw IllegalArgumentExceptions for null values, what kind of message template do you use? We tend to use something like this public User getUser(String username){ if (username == null){ throw new IllegalArgumentException("username is null"); } // ... } What is better : "is null" or "was null", and why? For me "is null" feels more natural.

    Read the article

  • Text editor capable of viewing invisibles?

    - by Timo
    A recent problem* left me wondering whether there is a text editor out there that lets you see every single character of the file, even if they are invisible? Specifically, I'm not looking for hex editing capabilities, I am interested in a text editor that'll show me all of the invisible characters (not just the common whitespace / line break characters). The BOM marker is just one example, others are e.g. mathematical invisibles or possibly unsupported characters. I'm not looking for a text editor that simply supports a large variety of text encoding / translations between encodings. All text editors I've come across treat the invisible characters correctly i.e. leave them invisible (or simply get removed in the translation as in the case of the BOM marker). I'm asking this mostly out of academic interests, so I'm not particular about any specific OS. I can easily test Linux and OSX solutions, but if you recommend a Windows editor, I would appreciate if you include descriptions of how the editor handles invisibles other than whitespace / line breaks. *The incident that lead me to this question: I wrote a perl script using TextWrangler and managed to change the encoding to UTF8 BOM, which inserts te BOM marker at the start of the file. Perl (or rather the operating system) promptly misses the #! and mayhem ensues. It then took me the better part of an afternoon to figure this out since most text editors do not show the BOM marker even with various "show invisibles" options turned on. Now I've learned my lesson and will use less immediately :-).

    Read the article

1 2  | Next Page >