IOGEAR GCS632U KVM casues Windows 7 Screensaver to not work

Posted by ahsteele on Super User See other posts from Super User or by ahsteele
Published on 2009-12-02T04:45:20Z Indexed on 2010/04/14 3:03 UTC
Read the original article Hit count: 777

Filed under:

kvm

|

iogear

|

windows-7

|

laptop

|

screensaver

When my Windows 7 laptop is in its dock and connected to the IOGEAR GCS632U KVM switch the screensaver will not start. If connected directly to the mouse and keyboard while in the dock the screensaver starts normally. The screensaver also works when out of the dock. I need the screensaver to work when connected to the KVM. What's causing the screensaver not to start? Suggestions on how to remedy the problem?

© Super User or respective owner

Related posts about kvm

kvm works only when kvm-intel is unloaded

as seen on Server Fault - Search for 'Server Fault'
I am new to kvm. I have this strange issue. But before explaining the issue, here is my set up. I try to install VM on my Host which is a Acer Laptop 5720 Has T7500 Intel processor. The cpu flags indicate that Virtualization is supported. I run Ubuntu 10.04 (lucid) on it. It comes with kvm. Now… >>> More
KVM-admin tools required

as seen on Server Fault - Search for 'Server Fault'
I require the KVM-admin tools that are supposed to be on the KVM home page http://www.linux-kvm.org/page/Kvmtools#Download but I am unable to find any refernce for then. Can anybody from the forum tell me from where I can get them. If somebody has a copy of them them please share a link so that… >>> More
Is anyone using KVM in production?

as seen on Server Fault - Search for 'Server Fault'
I've been trying to set up a pair of servers utilising KVM on Ubuntu 9.10 to host 8 virtual machines between them and ended up with various issues from the VMs freezing, to not powering on. I had one virtual server set up and running and was setting up a second, when any operation involving OpenSSL… >>> More
KVM online disk resize?

as seen on Server Fault - Search for 'Server Fault'
We're evaluting KVM for Linux virtualization on a few projects. All is going well so far. But one of our requirements is the ability to add disk space to a running guest without rebooting or taking it offline. Is this possible with KVM? The only thing I've found so far (but have not tested yet) is… >>> More
How do you get the IP addresses of KVM guests that are using a Bridge Network Device from the KVM host

as seen on Server Fault - Search for 'Server Fault'
Does anyone know of a way using KVM to find out the IP addresses of KVM guests that are using a bridge interface (br0) through the KVM host? Currently I have br0 setup with a single NIC (eth0) included. The KVM host is a system running CentOS 5.6 in case that matters. The guests are also running CentOS… >>> More

Related posts about iogear

IOGEAR GCS632U KVM casues Windows 7 Screensaver to not work

as seen on Super User - Search for 'Super User'
When my Windows 7 laptop is in its dock and connected to the IOGEAR GCS632U KVM switch the screensaver will not start. If connected directly to the mouse and keyboard while in the dock the screensaver starts normally. The screensaver also works when out of the dock. I need the screensaver to work… >>> More
IOGEAR GCS632U KVM casues Windows 7 Screensaver to not work

as seen on Super User - Search for 'Super User'
When my Windows 7 laptop is in its dock and connected to the IOGEAR GCS632U KVM switch the screensaver will not start. If connected directly to the mouse and keyboard while in the dock the screensaver starts normally. The screensaver also works when out of the dock. I need the screensaver to work… >>> More
IOGEAR KVM cannot reset admin account

as seen on Super User - Search for 'Super User'
According to the manual you can do a cold reset by holding the reset button in for 3 seconds. This does seem to reset it but the username and password are not reset... I've tried the keyboard hotkeys - Num-Lock and minus sign (-) to get into hotkey mode and then use the "r" and "" to reset to factory… >>> More
Invoking 'Hotkey Mode' in IO Gear's GCS632U KVM Switch

as seen on Super User - Search for 'Super User'
Awhile ago I changed the switch port key to left control on my IO Gear USB Switch and I'd like to change it back to Scroll Lock. When I did this, I have some memory of believing that I had found an error in the documentation for the switch regarding how to enter Hotkey Mode. Per the instructions… >>> More
Print server not being recognized after switching router and upgrading to 64 bit

as seen on Server Fault - Search for 'Server Fault'
I recently upgraded Windows 7 from 32 bit to 64 bit. I also switched my router from a very old model of Netgear to TP-Link. Before these updates, I had been using a USB print server by IOGear. After the updates, I took care to reinstall the drivers for both the print server and the printer, and picked… >>> More