openvpn problem

Posted by Jared Voronik on Server Fault See other posts from Server Fault or by Jared Voronik
Published on 2010-02-19T01:16:42Z Indexed on 2010/06/01 2:03 UTC
Read the original article Hit count: 275

Filed under:

linux

|

iptables

|

openvpn

I have a problem with openvpn. I have already setup openvpn sucessfully on some other servers in the past (basic configuration, nothing special). On this server, I used the same config file, but for setting up nat iptables -t nat -A POSTROUTING -s 10.4.0.0/24 -o eth0 -j MASQUERADE doesn't work. It gives error: iptables v1.3.5: can't initialize iptables table `nat': Table does not exist (do you need to insmod?) Perhaps iptables or your kernel needs to be upgraded. How do I fix this error? Also, if I can't fix this error, can I do bridging instead of routing? I have only 1 interface, and I can connect to remote server only via ssh (and need to avoid reboots if at all possible) so if briding means a whole ethernet card has to be devoted to the openvpn (and no other servers) then briding is out, otherwise I can use briding. Do you know of a simple, step by step guide to configure openvpn briding (just simple openvpn server and clients that can access internet through vpn server, nothing fancy)?

© Server Fault or respective owner

Related posts about linux

apt-get install and update fail

as seen on Ask Ubuntu - Search for 'Ask Ubuntu'
I've got a problem with apt-get update and apt-get install ... commands . every time update or installing fails and errors are : Get:1 http://dl.google.com stable Release.gpg [198B] Ign http://dl.google.com/linux/chrome/deb/ stable/main Translation-en_US Get:2 http://dl… >>> More
kernel module compiling error

as seen on Ask Ubuntu - Search for 'Ask Ubuntu'
sh@ubuntu:/home/ccpp/helloworld$ make gcc-4.6 -O2 -DMODULE -D_KERNEL_ -W -Wall -Wstrict-prototypes -Wmissing-prototypes -isystem /lib/modules/`uname -r`/build/include -c -o hello-1.o hello-1.c hello-1.c:4:0: warning: "MODULE" redefined [enabled by default] <command-line>:0:0: note: this is… >>> More
Build-Essentials installation failing

as seen on Ask Ubuntu - Search for 'Ask Ubuntu'
I am having trouble accessing the several critical header files that show to be a part of the build process. The "Ubuntu Software Center" shows "Build Essentials" as installed: Next I did the following two commands, which did not improve the problem: ~$ sudo apt-get install build-essential [sudo]… >>> More
Updating Debian kernel

as seen on Super User - Search for 'Super User'
I'm trying to update my Debian machine to 2.6.32-46 (which is the new stable). However, after doing apt-get update my apt-cache search linux-image shows me: linux-headers-2.6.32-5-486 - Header files for Linux 2.6.32-5-486 linux-headers-2.6.32-5-686-bigmem - Header files for Linux 2.6.32-5-686-bigmem linux-headers-2… >>> More
Serial connection over a single USB cable (Windows to linux, or linux to linux)

as seen on Server Fault - Search for 'Server Fault'
I'm helping out with a project for an embedded device that only has USB and no serial. This device is running Linux. These days, when we need to connect to a serial port on a device we typically use a USB to serial adapter (on something like a phone system or a load balancing device, etc). I would… >>> More

Related posts about iptables

Sometimes this script fails to update the iptables

as seen on Server Fault - Search for 'Server Fault'
It does not happen often, but sometimes after running the below script, checking the iptables with service iptables status shows that they weren't updated and the script doesn't output any error. The iptables is structured as look-up tree (long repeated sections snipped): #!/bin/sh iptables -t… >>> More
My current iptable configuration doesn't work [on hold]

as seen on Server Fault - Search for 'Server Fault'
sudo chkconfig iptables off /etc/init.d/iptables on ### Clear/flush iptables sudo iptables -F sudo iptables -P INPUT ACCEPT sudo iptables -P OUTPUT ACCEPT sudo iptables -P FORWARD ACCEPT ### Allow SSH iptables -A INPUT -i eth0 -p tcp --dport 22 -m state --state NEW,ESTABLISHED -j ACCEPT iptables… >>> More
L2TP iptables port forward

as seen on Server Fault - Search for 'Server Fault'
Hi all, I'm setting up port forwarding for an L2TP VPN connection to the local Windows 2003 VPN server. The router is a simpel Debian machine with iptables. The VPN server works perfect. But I cannot log in from the WAN. I'm missing something. The VPN server is using a pre-shared key (L2TP) and… >>> More
iptables -P FORWARD DROP makes port forwarding slow

as seen on Server Fault - Search for 'Server Fault'
I have three computers, linked like this: box1 (ubuntu) box2 router & gateway (debian) box3 (opensuse) [10.0.1.1] ---- [10.0.1.18,10.0.2.18,10.0.3.18] ---- [10.0.3.15] | box4, www [10.0.2.1] Among other… >>> More
IPtables AWS EC2 NAT/Reverse NAT - For Reverse Proxy style setup but with IPtables

as seen on Server Fault - Search for 'Server Fault'
I was thinking initially needing to do a reverse proxy or something so I could get some SSL/TLS traffic look like it is being terminated at a server and IP address in the AWS cloud, and then that traffic is forwarded onto our actual web servers that aren't in the cloud... I've not done much iptables… >>> More