HP DL380 RAID5 Mistake

Posted by Eddy on Server Fault See other posts from Server Fault or by Eddy
Published on 2010-06-08T15:12:35Z Indexed on 2010/06/08 15:12 UTC
Read the original article Hit count: 586

Filed under:

hp

|

raid5

|

smart

|

array

I had drives fail in both logical drives on a server. When I replaced failed 146GB drive in Raid 5 array with four (4) 146GB drives. On reboot the Smart Array controller asked if I wanted to accept data loss. Guess mistake to choose yes.

Can't seem to find a way to get system to repair RAID5 but it seems to want to just create a new partition.

Is there anyway I can go back and get the system to restore the data from other three drives now that I said accept data loss?

© Server Fault or respective owner

Related posts about hp

/usr/lib/cups/backend/hp has failed with an HP LaserJet p3005

as seen on Ask Ubuntu - Search for 'Ask Ubuntu'
Ever since 10.04, I can't print to an HP laserjet p3005. I'm even using an entirely different computer now with a fresh install of 10.10. I've tried with and without the latest hplip. Recently, sometimes I can get it to print a few things, but eventually it always fails (usually when printing a… >>> More
/usr/lib/cups/backend/hp has failed with an HP LaserJet p3005

as seen on Ask Ubuntu - Search for 'Ask Ubuntu'
Ever since 10.04, I can't print to an HP laserjet p3005. I'm even using an entirely different computer now with a fresh install of 10.10. I've tried with and without the latest hplip. Recently, sometimes I can get it to print a few things, but eventually it always fails (usually when printing a… >>> More
HP PDX Laptop and blu-ray region, HP MediaSmart problem

as seen on Super User - Search for 'Super User'
I have a laptop here, a HP HDX 16 EO1000 with a Blu-Ray drive. Installed on the machine is a software package called HP MediaSmart, which presumably can play Blu-Ray movies. However, when inserting a BD disk and starting HP MediaSmart, it comes up with a warning screen and the following message: … >>> More
Ubuntu 14.04:LTS , HPLIP loses USB connection to HP laserjet

as seen on Ask Ubuntu - Search for 'Ask Ubuntu'
This is my first post, so please let me know if i have inadvertanly broken any rules. Problem There seems to be a problem with HPLIP and USB connections in ubuntu 14.04LTS. After upgrading i managed to get the printing to work but today it has broken. Initial Issue (Solved) After upgrading to… >>> More
Getting hp-snmp-agents on HP ProLiant DL360 on Lenny working

as seen on Server Fault - Search for 'Server Fault'
After receiving our HP ProLiant DL360 I'd like to integrate the machine into our Munin system and thus enable ProLiant specific information to be exposed via SNMP. I'm running Debian Lenny with kernel 2.6.26-2-vserver-amd64 . I've followed http://downloads.linux.hp.com/SDR/getting_started.html and… >>> More

Related posts about raid5

Server 2008 RAID5 resynching

as seen on Server Fault - Search for 'Server Fault'
I built a W2K8 R2 server last weekend, and built a R5 array using Disk Management, 5x 1TB drives. For the next 60 hours the status said 'Resynching (X%)' as it built the array. during this time i did read and write to the drive (slowly) and once the rebuild was complete speeds were quite fast. I… >>> More
HP DL380 RAID5 Mistake

as seen on Server Fault - Search for 'Server Fault'
I had drives fail in both logical drives on a server. When I replaced failed 146GB drive in Raid 5 array with four (4) 146GB drives. On reboot the Smart Array controller asked if I wanted to accept data loss. Guess mistake to choose yes. Can't seem to find a way to get system to repair RAID5 but… >>> More
How to stop RAID5 array while it is shown to be busy?

as seen on Super User - Search for 'Super User'
I have a raid5 array and need to stop it, but while trying to stop it getting error. # cat /proc/mdstat Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10] md0 : active raid5 sde1[3](F) sdc1[4](F) sdf1[2] sdd1[1] 2120320 blocks level 5, 32k chunk, algorithm… >>> More
How can I create a 4TB partition on my software RAID5 device?

as seen on Ask Ubuntu - Search for 'Ask Ubuntu'
I have set up a RAID5 device with three 2TB hard drives using mdadm. The device was successfully created, but I cannot seem to create a partition on the device. When I try to make an ext3 or ext4 partition via Disk Utility, I get the following error Error creating partition: helper exited with exit… >>> More
Installing raid 5 on a pre-installed ubuntu server. 12.04

as seen on Ask Ubuntu - Search for 'Ask Ubuntu'
I have a ubuntu server with samba already set up and installed with a 1tb hdd. I am wanting to now install 3 more 1tb drives and create a raid array using raid 5. I have found a lot of documentation about installing raid when installing and setting up ubuntu server for the first time. However, I… >>> More