When I try connecting to my wireless network it attempts to connect then gives up.

There's something strange going on with the mac's. The eternet switch and all the vlan interfaces have a mac 00:FF:FF:FF:FF:FF.

config 'switch' 'eth0'
        option 'vlan0' '2 3 4 8*'
        option 'vlan1' '0 8'
        option 'vlan2' '1 8'

config 'interface' 'loopback'
        option 'ifname' 'lo'
        option 'proto' 'static'
        option 'ipaddr' '127.0.0.1'
        option 'netmask' '255.0.0.0'

config 'interface' 'lan'
        option 'type' 'bridge'
        option 'ifname' 'eth0.1'
        option 'proto' 'static'
        option 'netmask' '255.255.255.0'
        option 'ipaddr' '192.168.2.1'
        option 'ip6addr' ''
        option 'gateway' '192.168.1.253'
        option 'ip6gw' ''
        option 'dns' ''

config 'interface' 'wan'                    
        option 'ifname' 'eth0'              
        option 'proto' 'dhcp'               
        option 'ipaddr' '192.168.1.8'       
        option 'ip6addr' ''                 
        option 'netmask' '255.255.255.0'    
        option 'gateway' '192.168.1.253'    
        option 'ip6gw' ''                   
        option 'dns' '192.168.1.253'        

config 'interface' 'dmz'                    
       option 'ifname' 'eth0.2'             
       option 'proto' 'static'              
       option 'ipaddr' '192.168.0.1'        
       option 'netmask' '255.255.255.0'     

Any help on this will be greatly appreciated! When I try setting the mac using macaddr it does nothing. It works perfectly fine when I turn the authentication off. I've also discovered that when wpa2 is switched on I don't receive a association reply from ap.

thats my hostapd.conf

interface=eth1
driver=broadcom
bridge=br-lan
ssid=O2BB3
wpa=2
wpa_passphrase=prettywoman
wpa_key_mgmt=WPA-PSK
rsn_pairwise=CCMP

Btw that password is only temporary while am testing.