How to configure TATA Photon+ EC1261 HUAWEI

Posted by user3215 on Ask Ubuntu See other posts from Ask Ubuntu or by user3215
Published on 2010-10-11T14:19:15Z Indexed on 2011/03/05 15:32 UTC
Read the original article Hit count: 369

Filed under:
|
|

I'm running ubuntu 10.04. I have a newly purchased TATA Photon+ Internet connection which supports Windows and Mac. On the Internet I found a article saying that it could be configured on Linux. I followed the steps to install it on Ubuntu from this link. I am still not able to get online, and need some help.

Also, it is very slow, but I was told that I would see speeds up to 3.1MB.

I dont have wvdial installed and cannot install it from apt as I'm not connected to internet

Booting from windows I dowloaded "wvdial" .deb package and tried to install on ubuntu but it's ended with dependency problem. Automatically, don't know how, I got connected to internet only for once. Immediately I installed wvdial package after this I followed the tutorials(I could not browse and upload the files here) . From then it's showing that the device is connected in the network connections but no internet connection. Once I disable the device, it won't show as connected again and I'll have to restart my system. Sometimes the device itself not detected(wondering if there is any command to re-read the all devices).

output of wvdialconf /etc/wvdial.cof:

#wvdialconf /etc/wvdial.conf

Editing `/etc/wvdial.conf'.

Scanning your serial ports for a modem.

ttyS0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyS0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
ttyS0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
Modem Port Scan<*1>: S1   S2   S3   
WvModem<*1>: Cannot get information for serial port.
ttyUSB0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyUSB0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 9600 baud
ttyUSB0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
WvModem<*1>: Cannot get information for serial port.
ttyUSB1<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyUSB1<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 9600 baud
ttyUSB1<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
WvModem<*1>: Cannot get information for serial port.
ttyUSB2<*1>: ATQ0 V1 E1 -- OK
ttyUSB2<*1>: ATQ0 V1 E1 Z -- OK
ttyUSB2<*1>: ATQ0 V1 E1 S0=0 -- OK
ttyUSB2<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK
ttyUSB2<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK
ttyUSB2<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
ttyUSB2<*1>: Modem Identifier: ATI -- Manufacturer: +GMI: HUAWEI TECHNOLOGIES CO., LTD
ttyUSB2<*1>: Speed 9600: AT -- OK
ttyUSB2<*1>: Max speed is 9600; that should be safe.
ttyUSB2<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK

Found a modem on /dev/ttyUSB2.
Modem configuration written to /etc/wvdial.conf.
ttyUSB2<Info>: Speed 9600; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0"

output of wvdial:

#wvdial
--> WvDial: Internet dialer version 1.60
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
--> Sending: AT+CRM=1
AT+CRM=1
OK
--> Modem initialized.
--> Sending: ATDT#777
--> Waiting for carrier.
ATDT#777
CONNECT
--> Carrier detected.  Starting PPP immediately.
--> Starting pppd at Sat Oct 16 15:30:47 2010
--> Pid of pppd: 5681
--> Using interface ppp0
--> pppd: (u;[08]@s;[08]`{;[08]
--> pppd: (u;[08]@s;[08]`{;[08]
--> pppd: (u;[08]@s;[08]`{;[08]
--> pppd: (u;[08]@s;[08]`{;[08]
--> pppd: (u;[08]@s;[08]`{;[08]
--> pppd: (u;[08]@s;[08]`{;[08]
--> local  IP address 14.96.147.104
--> pppd: (u;[08]@s;[08]`{;[08]
--> remote IP address 172.29.161.223
--> pppd: (u;[08]@s;[08]`{;[08]
--> primary   DNS address 121.40.152.90
--> pppd: (u;[08]@s;[08]`{;[08]
--> secondary DNS address 121.40.152.100  
--> pppd: (u;[08]@s;[08]`{;[08]

Output of log message /var/log/messages:

Oct 16 15:29:44 avyakta-desktop pppd[5119]: secondary DNS address 121.242.190.180
Oct 16 15:29:58 desktop pppd[5119]: Terminating on signal 15
Oct 16 15:29:58 desktop pppd[5119]: Connect time 0.3 minutes.
Oct 16 15:29:58 desktop pppd[5119]: Sent 0 bytes, received 177 bytes.
Oct 16 15:29:58 desktop pppd[5119]: Connection terminated.
Oct 16 15:30:47 desktop pppd[5681]: pppd 2.4.5 started by root, uid 0
Oct 16 15:30:47 desktop pppd[5681]: Using interface ppp0
Oct 16 15:30:47 desktop pppd[5681]: Connect: ppp0 <--> /dev/ttyUSB2
Oct 16 15:30:47 desktop pppd[5681]: CHAP authentication succeeded
Oct 16 15:30:47 desktop pppd[5681]: CHAP authentication succeeded
Oct 16 15:30:48 desktop pppd[5681]: local  IP address 14.96.147.104
Oct 16 15:30:48 desktop pppd[5681]: remote IP address 172.29.161.223
Oct 16 15:30:48 desktop pppd[5681]: primary   DNS address 121.40.152.90
Oct 16 15:30:48 desktop pppd[5681]: secondary DNS address 121.40.152.100

EDIT 1 :

I tried the following

sudo stop network-manager
sudo killall modem-manager

sudo /usr/sbin/modem-manager --debug > ~/mm.log 2>&1 &

sudo /usr/sbin/NetworkManager --no-daemon > ~/nm.log 2>&1 &

Output of mm.log:

#vim ~/mm.log:

** Message: Loaded plugin Option High-Speed

** Message: Loaded plugin Option

** Message: Loaded plugin Huawei

** Message: Loaded plugin Longcheer

** Message: Loaded plugin AnyData

** Message: Loaded plugin ZTE

** Message: Loaded plugin Ericsson MBM

** Message: Loaded plugin Sierra

** Message: Loaded plugin Generic

** Message: Loaded plugin Gobi

** Message: Loaded plugin Novatel

** Message: Loaded plugin Nokia

** Message: Loaded plugin MotoC

Output of nm.log:

#vim ~/nm.log:

NetworkManager: <info>  starting...

NetworkManager: <info>  modem-manager is now available

NetworkManager:    SCPlugin-Ifupdown: init!

NetworkManager:    SCPlugin-Ifupdown: update_system_hostname

NetworkManager:    SCPluginIfupdown: guessed connection type (eth0) = 802-3-ethernet

NetworkManager:    SCPlugin-Ifupdown: update_connection_setting_from_if_block:     

name:eth0, type:802-3-ethernet, id:Ifupdown (eth0), uuid: 681b428f-beaf-8932-dce4-678ed5bae28e

NetworkManager:    SCPlugin-Ifupdown: addresses count: 1

NetworkManager:    SCPlugin-Ifupdown: No dns-nameserver configured in /etc/network/interfaces

NetworkManager: nm-ifupdown-connection.c.119 - invalid connection read from /etc/network/interfaces: (1) addresses

NetworkManager:    SCPluginIfupdown: management mode: unmanaged

NetworkManager:    SCPlugin-Ifupdown: devices added (path: /sys/devices/pci0000:00/0000:00:14.4/0000:02:02.0/net/eth1, iface: eth1)

NetworkManager:    SCPlugin-Ifupdown: device added (path: /sys/devices/pci0000:00/0000:00:14.4/0000:02:02.0/net/eth1, iface: eth1): no ifupdown configuration found.

NetworkManager:    SCPlugin-Ifupdown: devices added (path: /sys/devices/virtual/net/lo, iface: lo)

@

© Ask Ubuntu or respective owner

Related posts about 10.04

  • An increase to 3 Gig of RAM slows down Ubuntu 10.04 LTS

    as seen on Ask Ubuntu - Search for 'Ask Ubuntu'
    I have Ubuntu 10.04 running from an external hard drive (installed on an enclosure) connected via USB port. Like a month or so ago, I increased RAM on my pc from 2 Gigs to 3 Gigs. This resulted on extremely long boot times and slow application loads. While I was understanding the nature of my problem… >>> More

  • Default /etc/apt/sources.list?

    as seen on Ask Ubuntu - Search for 'Ask Ubuntu'
    I need default source list for ubuntu 10.04. Can anybody help me? Here is Mine:--- Ubuntu supported packages deb http://archive.ubuntu.com/ubuntu/ lucid main restricted multiverse universe deb http://archive.ubuntu.com/ubuntu/ lucid-backports main restricted universe multiverse deb http://archive… >>> More

  • SSH main process ended

    as seen on Ask Ubuntu - Search for 'Ask Ubuntu'
    I have a running ubuntu server 10.04.1. When I tried to login to the server via ssh, I could not. Instead, I got connection refused error. I tried to ping the machine and I got reply! So, the clear reason is that SSH daemon is stopped. After reboot, I was able to login to my server via ssh. After… >>> More

  • Postgresql fails to start on Ubuntu 10.04.4 LTS

    as seen on Ask Ubuntu - Search for 'Ask Ubuntu'
    I installed postgresql 9.2 from add-apt-repository ppa:pitti/postgresql using apt-get install postgresql-9.2 At the end of the install and every time I try to launch postgresql by using the following command /etc/init.d/postgresql start or service postgresql start I get this error: Error:… >>> More

  • PPA causing 404 error?

    as seen on Ask Ubuntu - Search for 'Ask Ubuntu'
    I need default source list for ubuntu 10.04. Can anybody help me? Here is Mine:--- Ubuntu supported packages deb http://archive.ubuntu.com/ubuntu/ lucid main restricted multiverse universe deb http://archive.ubuntu.com/ubuntu/ lucid-backports main restricted universe multiverse deb http://archive… >>> More

Related posts about internet