Server with 3 public IP and iptables

Posted by Juan on Server Fault See other posts from Server Fault or by Juan
Published on 2011-11-18T01:34:30Z Indexed on 2011/11/18 1:52 UTC
Read the original article Hit count: 516

Filed under:

iptables

|

ip-forwarding

I have a linux box with two NIC cards: eth0 and eth1.

In one card i have 3 public IP: eth0 = 10.10.10.1, eth0:1= 10.10.10.2 and eth0:2= 10.10.10.3 In the other card i have one local IP eth1 = 192.9.200.1

I want to redirect all the wan traffic for 10.10.10.2 to the LAN 192.9.200.2 and the same for 10.10.10.3 to 192.9.200.3

I have tried with this rule but doesn't work

iptables -t nat -A PREROUTING -i eth0 -d 10.10.10.2 -j DNAT --to-destination 192.9.200.2
iptables -t nat -A PREROUTING -i eth0 -d 10.10.10.3 -j DNAT --to-destination 192.9.200.3

IP forward is enabled in /etc/sysctl.conf

Can you help me, please.

© Server Fault or respective owner

Related posts about iptables

Sometimes this script fails to update the iptables

as seen on Server Fault - Search for 'Server Fault'
It does not happen often, but sometimes after running the below script, checking the iptables with service iptables status shows that they weren't updated and the script doesn't output any error. The iptables is structured as look-up tree (long repeated sections snipped): #!/bin/sh iptables -t… >>> More
My current iptable configuration doesn't work [on hold]

as seen on Server Fault - Search for 'Server Fault'
sudo chkconfig iptables off /etc/init.d/iptables on ### Clear/flush iptables sudo iptables -F sudo iptables -P INPUT ACCEPT sudo iptables -P OUTPUT ACCEPT sudo iptables -P FORWARD ACCEPT ### Allow SSH iptables -A INPUT -i eth0 -p tcp --dport 22 -m state --state NEW,ESTABLISHED -j ACCEPT iptables… >>> More
L2TP iptables port forward

as seen on Server Fault - Search for 'Server Fault'
Hi all, I'm setting up port forwarding for an L2TP VPN connection to the local Windows 2003 VPN server. The router is a simpel Debian machine with iptables. The VPN server works perfect. But I cannot log in from the WAN. I'm missing something. The VPN server is using a pre-shared key (L2TP) and… >>> More
iptables -P FORWARD DROP makes port forwarding slow

as seen on Server Fault - Search for 'Server Fault'
I have three computers, linked like this: box1 (ubuntu) box2 router & gateway (debian) box3 (opensuse) [10.0.1.1] ---- [10.0.1.18,10.0.2.18,10.0.3.18] ---- [10.0.3.15] | box4, www [10.0.2.1] Among other… >>> More
IPtables AWS EC2 NAT/Reverse NAT - For Reverse Proxy style setup but with IPtables

as seen on Server Fault - Search for 'Server Fault'
I was thinking initially needing to do a reverse proxy or something so I could get some SSL/TLS traffic look like it is being terminated at a server and IP address in the AWS cloud, and then that traffic is forwarded onto our actual web servers that aren't in the cloud... I've not done much iptables… >>> More

Related posts about ip-forwarding

Varnish configuration, NamevirtualHosts, and IP Forwarding

as seen on Server Fault - Search for 'Server Fault'
I currently have a bunch of NameVirtualHost based websites, load balanced between 3 apache2 servers using ldirectord. I would like to insert varnish as a reverse-web-proxy between ldirectord and apache in the following way: a request comes in to ldirectord it is then load balanced between the 3… >>> More
IP Forwarding and Routing in Windows 2008

as seen on Server Fault - Search for 'Server Fault'
I have Hyper-V running on a windows 2008. I got a new ip stack from the data center to be set on my virtual machines. But I have difficulties to set these IPs on my VMs because they are on different network. my current server ip is xxx.xxx.18.6 with MASK : 255.255.255.224 and the GW is xxx.xxx.18… >>> More
centos 6.3 kvm external ip forwarding to guests

as seen on Server Fault - Search for 'Server Fault'
I have a centos 6.3 server with kvm installed. The server has 4 external ips and one NIC. 176.9.xxx.xx1 176.9.xxx.xx2 176.9.xxx.xx3 176.9.xxx.xx4 I use the following configuration ifcfg-eth0 as slave to ifcfg-br0 the configuration in ifcfg-eth0 is DEVICE=eth0 ONBOOT=yes BRIDGE=br0 HWADDR=14:da:e9:b3:8b:99 and… >>> More
TCP/IP Forwarding in Windows Vista and Above

as seen on Super User - Search for 'Super User'
This is the way to do it on XP, but is it possible on Windows Vista and Above? If so how do you detect it? Is there a registry setting for it, or is there com dll or api for it? >>> More
IP to IP forwarding with iptables [centos]

as seen on Server Fault - Search for 'Server Fault'
I have 2 servers. Server 1 with ip 1.1.1.1 and server 2 with ip 2.2.2.2 My domain example.com points to 1.1.1.1 at the moment, but very soon I'm going to switch to ip 2.2.2.2. I have already setup a low TTL for domain example.com, but some people will still hit the old ip a after I change the ip… >>> More