Remove Kernel Lock from Unmounted Mass Storage USB Device from the Command Line in Linux
Posted
by
Casey
on Super User
See other posts from Super User
or by Casey
Published on 2010-06-03T11:07:20Z
Indexed on
2012/03/30
17:34 UTC
Read the original article
Hit count: 631
I've searched high and low, and can't figure this one out. I have a older Olympus Camera (2001 or so). When I plug in the USB connection, I get the following log output:
$ dmesg | grep sd
[20047.625076] sd 21:0:0:0: Attached scsi generic sg7 type 0
[20047.627922] sd 21:0:0:0: [sdg] Attached SCSI removable disk
Secondly, the drive is not mounted in the FS, but when I run gphoto2 I get the following error:
$ gphoto2 --list-config
*** Error ***
An error occurred in the io-library ('Could not lock the device'): Camera is already in use.
*** Error (-60: 'Could not lock the device') ***
What command will unmount the drive. For example in Nautilus, I can right click and select "Safely Remove Device". After doing that, the /dev/sg7 and /dev/sdg devices are removed.
The output of gphoto2 is then:
# gphoto2 --list-config
/Camera Configuration/Picture Settings/resolution
/Camera Configuration/Picture Settings/shutter
/Camera Configuration/Picture Settings/aperture
/Camera Configuration/Picture Settings/color
/Camera Configuration/Picture Settings/flash
/Camera Configuration/Picture Settings/whitebalance
/Camera Configuration/Picture Settings/focus-mode
/Camera Configuration/Picture Settings/focus-pos
/Camera Configuration/Picture Settings/exp
/Camera Configuration/Picture Settings/exp-meter
/Camera Configuration/Picture Settings/zoom
/Camera Configuration/Picture Settings/dzoom
/Camera Configuration/Picture Settings/iso
/Camera Configuration/Camera Settings/date-time
/Camera Configuration/Camera Settings/lcd-mode
/Camera Configuration/Camera Settings/lcd-brightness
/Camera Configuration/Camera Settings/lcd-auto-shutoff
/Camera Configuration/Camera Settings/camera-power-save
/Camera Configuration/Camera Settings/host-power-save
/Camera Configuration/Camera Settings/timefmt
Some things I've tried already are sdparm
and sg3_utils
, however I am unfamiliar with them, so it's possible I just didn't find the right command.
Update 1:
# mount | grep sdg
# mount | grep sg7
# umount /dev/sg7
umount: /dev/sg7: not mounted
# umount /dev/sdg
umount: /dev/sdg: not mounted
# gphoto2 --list-config
*** Error ***
An error occurred in the io-library ('Could not lock the device'): Camera is already in use.
*** Error (-60: 'Could not lock the device') ***
© Super User or respective owner