The routing on my Juniper EX3300 does not seem to be working. My ISP's gateway is at xx.xx.xx.xx. And I have the following in the configuration:

routing-options {
    static {
        route 0.0.0.0/0 {
            next-hop xx.xx.xx.xx;
            retain;
        }
    }                                   
}

I can ping to my ISP's gateway from the switch. However, I can NOT ping to any other IP. When I do a traceroute (to Google.com's IP). This is what I get:

traceroute to 74.125.224.69 (74.125.224.69), 30 hops max, 40 byte packets
traceroute: sendto: No route to host
 1 traceroute: wrote 74.125.224.69 40 chars, ret=-1
 *traceroute: sendto: No route to host

Do I need to enable any protocols? I guess this goes without saying, but I am kind of new to Junos.

Update: This is the output from show interfaces terse | match inet:

bme0.32768              up    up   inet     128.0.0.1/2     
jsrv.1                  up    up   inet     128.0.0.127/2   
vlan.0                  up    up   inet     10.0.1.1/24     
vlan.1                  up    up   inet     xx.xx.xx.110/30

and this is the output from: show route forwarding-table:

Routing table: default.inet
Internet:
Destination        Type RtRef Next hop           Type Index NhRef Netif
default            perm     0                    rjct    36     1
0.0.0.0/32         perm     0                    dscd    34     1
10.0.1.0/24        intf     0                    rslv  1321     1 vlan.0
10.0.1.0/32        dest     0 10.0.1.0           recv  1319     1 vlan.0
10.0.1.1/32        intf     0 10.0.1.1           locl  1320     2
10.0.1.1/32        dest     0 10.0.1.1           locl  1320     2
10.0.1.3/32        dest     1 0:25:90:63:26:53   ucst  1331     2 vlan.0
10.0.1.255/32      dest     0 10.0.1.255         bcst  1318     1 vlan.0