Getting VMWare ESXi 5.0.0 with RAID using the Intel X79 chipset to work

Posted by Deleted on Server Fault See other posts from Server Fault or by Deleted
Published on 2012-07-12T23:44:27Z Indexed on 2012/08/29 3:40 UTC
Read the original article Hit count: 993

Filed under:

raid

|

vmware-esxi

|

intel

I have bought a new server where I use the motherboard ASUS P9X79 WS X79 S-2011 ATX. It will be used for virtualization, preferably using VMware vSphere Hypervisor™ (ESXi) if I can get the RAID on my motherboard working with VMWare (it does not detect it).

The motherboard has the Intel® X79 chipset, which for RAID controller means vendor ID 8086 (Intel) and model ID 2826.

When I boot the ESXi 5.0.0 installation media from my flash drive I can not see drives in the RAID5 set I created.

Questions:

Is there a VIB file for the RAID controller I can use?
I have found one article at http://www.intel.com/support/motherboards/server/sb/CS-033313.htm on getting RAID to work with some Intel controllers, it lists 9 integrated RAID modules it is comptabile with. However, there is no mention of the X79 chipset.

© Server Fault or respective owner

Related posts about raid

Booting from integrated RAID controller when another RAID controller is installed in a PCIe slot

as seen on Server Fault - Search for 'Server Fault'
I have a GA MA785GT UD3H motherboard with Windows Server 2008 R2 installed on a RAID1 using the on-board RAID controller. I have now installed a RocketRaid 2680 controller and set up a RAID5 for all my data to be stored on. Unfortunately I now cannot boot from the RAID1 anymore, the PC is trying… >>> More
Onboard RAID vs Software RAID

as seen on Server Fault - Search for 'Server Fault'
My motherboard, an Asus M4a79t Deluxe, advertises RAID 0/1/5 capabilities. My limited understanding is that onboard RAID is better than software RAID. Is this necessarily true? Is an onboard RAID controller closer in performance to a software controller or a dedicated hardware controller? >>> More
RAID-1 and regular drive removal (using RAID-1 as a backup measure)

as seen on Super User - Search for 'Super User'
Is using mdadm's RAID-1 of 2 partitions (one on laptop's internal HDD, one on external HDD) a good idea. I want the system to work as RAID-1 if both drives are present, work as regular volume (degradad RAID-1) if external HDD is unplugged and quickly resync when I plug external HDD again. Questions: Is… >>> More
Explain difference in SQLIO numbers for RAID 0 versus RAID 5 over 6 disks

as seen on Stack Overflow - Search for 'Stack Overflow'
When using the SQLIO benchmark tool on a 4-core Dell server with 6 15k 450GB (fast) drives, RAID 0, we found the max throughput was 2MB per second. But when configured as RAID 5, we get 30 MB per second. It seems that the RAID controller, Dell Perc 5i integrated controller, is maxing out the… >>> More
RAID 5 RECONSTRUCT with RAID Reconstructor

as seen on Server Fault - Search for 'Server Fault'
I have Dell Poweredge server 2600 with Raid 5 in 3 hard drive Scsi 36gb each, it was fail to boot sinc the third drive is offline. I attached Sata card adapter to Sata hard drive and install OS SERVER 2003 to it, downloaded drivers for Raid and everything goes fine when I use recovery data software… >>> More

Related posts about vmware-esxi

VMWare ESXi, change the default path for a VM

as seen on Server Fault - Search for 'Server Fault'
For some reason VMWare ESXi has decided that one of my VMs is on a completely different path to the path it is actually on. So my VM is on /vmfs/volumes/long-guid-here/my-vm-name but when I try to open it I get the message "File < unspecified filename was not found." Which is not really surprising… >>> More
VMWare ESXi 3.5 Wake On Lan

as seen on Server Fault - Search for 'Server Fault'
Hello everyone! I am using VMWare ESXi 3.5 on my server, and I want to be able to remotely boot the server up. In the bios settings of the computer, I enabled Wake on Lan. I know usually with Windows XP and other Windows Operating Systems, you have to also enable wake on lan in the network card settings… >>> More
blu-ray archiving in vmware ESXi 4

as seen on Server Fault - Search for 'Server Fault'
Hi, I need some advice about using blu-ray writer for archiving data on vmware ESXi 4. At office we have IBM System x3400 Tower server with ESXi 4 hipervisor and OpenSuse and CentOS GNU/Linux system as guests. Will blu-ray writer work in this setup, and if it will is there any particular model you… >>> More
I need to get VMWare Server running inside of a VMWare ESXi virtual machine

as seen on Server Fault - Search for 'Server Fault'
Yes, I know running a virtual machine inside of a virtual machine is a bad idea. Yes, I know it will be very slow. However, our production system required VMs in VMWare server and I do not want to setup a real server for each of our developers for testing. I would like to be able to setup all of… >>> More
Eject disk on Mac Pro running VMWare ESXi

as seen on Server Fault - Search for 'Server Fault'
I'm almost embarrassed to ask this, but I'm stuck. I installed VMWare ESXi on a Mac Pro. It's working great! The problem is that you press F12 to eject the disk, and F12 is what you use to shutdown ESX. I can power down, open the case, pull out the CD drive and use a paper clip to force the drawer… >>> More