Ethernet to TL-WR340G with WIFI enabled Using TL-WA500 tried repeater mode which was not good enough and had password problems (could not connect if using either ASCII or Normal password in one way then in repeater worked other way) and also could not forward (repeat) WPA/WPA2 security.

So since this repeater can also be as client, I made it as client and used another router (TL-WR740N) to get from wire connection from that client and all was working for a little bit.

• Every machine is set up to be auto DHCP.
• 1st when setting up client mode I found it working after doing reset.
• Then after some tens of minutes internet stopped working.
• When I removed WiFi client then all went back to normal.

Where is the problem and how to make this work?

Ethernet->

TL-WR340G(AutoDHCP) ==> wifi ==> TL-WA500 
TL-WA500 wifi client mode(AutoDHCP) ==> wire ==> TL-WR740N
TL-WR740N router mode (AutoDHCP) ==> My Computer

In other words:

TL-WR340G ) ) ) ) TL-WA500 ===== TL-WR740N ==== PC1

) ) WiFi
=== Wire