PSU failing or Mainboard failing?

Posted by Andrei Rinea on Super User See other posts from Super User or by Andrei Rinea
Published on 2012-08-19T12:24:59Z Indexed on 2012/09/25 21:40 UTC
Read the original article Hit count: 290

Filed under:
|
|
|
|

I am having some troubles lately powering on my desktop workstation.

While starting up the PC after being off for hours (usually at least 8 hours) it randomly fails to do so.

What happens is that :

  1. I press the power button; nothing happens
  2. I can hear a moderate buzzing noise at the back of the PC (near the PSU); but I can't say for sure that it's not from the mainboard.
  3. If I insist pressing the power button a few times in 1-2 minutes it'll start

Another route would be that instead of (3) I will plug off the power cable from the PSU and wait for 30 seconds. Then I will press the power on and keep it for 30-60 seconds (I had some success at notebooks with a similar approach). Then I will plug back the cable in the PSU, press only once the power button and it will start normally.

Also while running normally I keep hearing some low buzzing which seems to be fan-RPM-related (i.e. when processing images or doing CPU intensive work).

What should I look into?


UPDATE

It's getting worse. It took more than 10 retries today and almost 20 minutes to start the computer. I tried the paperclip trick and the PSU behaves perfectly. I managed to start the computer like so : I pressed the on-button a few times and then left the PC in a pre-startup state (the fans were working the buzzing noise was strong and I went to eat. I thought I won't lit the house on fire so fast and without smelling. Back, after 10-15 min the computer booted up! Discussed with a fellow at Intel and he told me the capacitors on the mainboard are probably a bit shot. If they are shot, he said, it should start up warm perfectly. So I did restart it, warm, a few times (5 sec cooldown and then 40 sec cooldown and it started up perfectly). I can either replace the capacitors on the mainboard (doesn't sound worth it or replace the mainboard (this one sucks too :)) )


FINAL INFO : It was the PSU after all. Although it was powering the IDEs and SATAs the Mainboard power module was failing. I bought another mainboard just to find out that this wasn't the cause. Now I'll have to return it somehow. The spare PSU is now in the computer and doing well.. Although larger (500W), it's like a plane taking off.. I need a better one.

© Super User or respective owner

Related posts about motherboard

  • Motherboard Wiring

    as seen on Super User - Search for 'Super User'
    HI All, I bought a new case to put a motherboard in. Everything fits, I have done this before, but not in a long time! The case has wires for - Power SW - Reset SW - Power LED - HDD LED On the motherboard (ASUS M2NPV-VM) it is clearly labeled where these go, but I cannot remember where the black… >>> More

  • xfx 680i motherboard failure?

    as seen on Super User - Search for 'Super User'
    At some point last night we must have had a blip in our power, as the stove clock was blinking like it would had their been... a blip in the power. When I came into my office this morning, my desktop computer was powered down and would not turn on. Cracking the case, I can see a small blue blinking… >>> More

  • Current Motherboard Tech Overview

    as seen on Super User - Search for 'Super User'
    Welp, computer died. Time to get a new motherboard. I haven't been paying attention to the latest motherboard technology and associated models and chipsets. Can someone point me at an overview of what is currently available? I'm primarily interested in the Intel / nvidia side of things. >>> More

  • Processor with higher FSB than motherboard can support.

    as seen on Super User - Search for 'Super User'
    Hi all, Please redirect me if there is a similar question, but I have an ECS P4VXASD2+ (V5.0) motherboard, which supports a 533 MHz FSB. I want to put in a Pentium 4 3.2 GHz processor (Socket 478) with an FSB of 800 MHz. Would this be possible? Would the FSB of the processor just be limited to 533… >>> More

  • How to get Processor and Motherboard Id ?

    as seen on Stack Overflow - Search for 'Stack Overflow'
    I use the code from http://www.rgagnon.com/javadetails/java-0580.html to get Motherboard Id, but the result is "null", <1 How can that be ? <2 Also I modified the code a bit to look like this to get processor Id : "Set objWMIService = GetObject(\"winmgmts:\\\\.\\root\\cimv2\")\n"+ … >>> More

Related posts about power-supply