I have a server that is doing an NFSv4 export for user's home directories. There are roughly 25 users (mostly developers/analysts) and about 40 servers mounting the home directory export. Performance is miserable, with users often seeing multi-second lags for simple commands (like ls, or writing a small text file). Sometimes the home directory mount completely hangs for minutes, with users getting "permission denied" errors.

The hardware is a Dell R510 with dual E5620 CPUs and 8 GB RAM. There are eight 15k 2.5” 600 GB drives (Seagate ST3600057SS) configured in hardware RAID-6 with a single hot spare. RAID controller is a Dell PERC H700 w/512MB cache (Linux sees this as a LSI MegaSAS 9260). OS is CentOS 5.6, home directory partition is ext3, with options “rw,data=journal,usrquota”.

I have the HW RAID configured to present two virtual disks to the OS: /dev/sda for the OS (boot, root and swap partitions), and /dev/sdb for the home directories.

What I find curious, and suspicious, is that the sda device often has very high utilization, even though it only contains the OS. I would expect this virtual drive to be idle almost all the time. The system is not swapping, according to "free" and "vmstat". Why would there be major load on this device?

Here is a 30-second snapshot from iostat:

Time: 09:37:28 AM
Device:         rrqm/s   wrqm/s   r/s   w/s    rkB/s    wkB/s avgrq-sz avgqu-sz   await svctm  %util
sda               0.00    44.09  0.03 107.76     0.13   607.40    11.27     0.89    8.27   7.27  78.35
sda1              0.00     0.00  0.00  0.00     0.00     0.00     0.00     0.00    0.00   0.00   0.00
sda2              0.00    44.09  0.03 107.76     0.13   607.40    11.27     0.89    8.27   7.27  78.35
sdb               0.00  2616.53  0.67 157.88     2.80 11098.83   140.04     8.57   54.08   4.21  66.68
sdb1              0.00  2616.53  0.67 157.88     2.80 11098.83   140.04     8.57   54.08   4.21  66.68
dm-0              0.00     0.00  0.03 151.82     0.13   607.26     8.00     1.25    8.23   5.16  78.35
dm-1              0.00     0.00  0.00  0.00     0.00     0.00     0.00     0.00    0.00   0.00   0.00
dm-2              0.00     0.00  0.67 2774.84     2.80 11099.37     8.00   474.30  170.89   0.24  66.84
dm-3              0.00     0.00  0.67 2774.84     2.80 11099.37     8.00   474.30  170.89   0.24  66.84

Looks like iotop is the ideal tool to use to sniff out these kinds of issues. But I'm on CentOS 5.6, which doesn't have a new enough kernel to support that program.

I looked at Determining which process is causing heavy disk I/O?, and besides iotop, one of the suggestions said to do a "echo 1 > /proc/sys/vm/block_dump". I did that (after directing kernel messages to tempfs). In about 13 minutes I had about 700k reads or writes, roughly half from kjournald and the other half from nfsd:

# egrep " kernel: .*(READ|WRITE)" messages | wc -l
768439
# egrep " kernel: kjournald.*(READ|WRITE)" messages | wc -l
403615
# egrep " kernel: nfsd.*(READ|WRITE)" messages | wc -l
314028

For what it's worth, for the last hour, utilization has constantly been over 90% for the home directory drive. My 30-second iostat keeps showing output like this:

Time: 09:36:30 PM
Device:         rrqm/s   wrqm/s   r/s   w/s    rkB/s    wkB/s avgrq-sz avgqu-sz   await  svctm  %util
sda               0.00     6.46  0.20 11.33     0.80    71.71    12.58     0.24   20.53  14.37  16.56
sda1              0.00     0.00  0.00  0.00     0.00     0.00     0.00     0.00    0.00   0.00   0.00
sda2              0.00     6.46  0.20 11.33     0.80    71.71    12.58     0.24   20.53  14.37  16.56
sdb             137.29     7.00 549.92  3.80 22817.19    43.19    82.57     3.02    5.45   1.74  96.32
sdb1            137.29     7.00 549.92  3.80 22817.19    43.19    82.57     3.02    5.45   1.74  96.32
dm-0              0.00     0.00  0.20 17.76     0.80    71.04     8.00     0.38   21.21   9.22  16.57
dm-1              0.00     0.00  0.00  0.00     0.00     0.00     0.00     0.00    0.00   0.00   0.00
dm-2              0.00     0.00 687.47 10.80 22817.19    43.19    65.48     4.62    6.61   1.43  99.81
dm-3              0.00     0.00 687.47 10.80 22817.19    43.19    65.48     4.62    6.61   1.43  99.82