Remote Access Problems with DRAC 5 on Dell PowerEdge 1950

Posted by Darin Peterson on Server Fault See other posts from Server Fault or by Darin Peterson
Published on 2013-03-12T02:29:43Z Indexed on 2013/06/26 22:23 UTC
Read the original article Hit count: 471

Filed under:

lan

|

dell-poweredge

|

drac

Today I received my first Dell PowerEdge 1950 server with a DRAC 5 card. On my local network I have static configurations on my Linux systems using this for instance:

iface eth0 inet static

address 192.168.1.210
netmask 255.255.255.0
network 192.168.1.0
broadcast 192.168.1.255
gateway 192.168.1.1
dns-nameservers 8.8.8.8 8.8.4.4

For the DRAC card, I configured the LAN like this:

address 192.168.1.215
netmask 255.255.255.0
gateway 192.168.1.1

For the advanced LAN settings I used

dns-nameservers 8.8.8.8 8.8.4.4

I've tried many different IP addresses, but cannot communicate with the card. Is there anyone who might know if I have configuration issues, or maybe if the card might be bad?

© Server Fault or respective owner

Related posts about lan

Which LAN card / module combinations proven to work with Wake on LAN

as seen on Ask Ubuntu - Search for 'Ask Ubuntu'
I've got a 12.04 headless server that I've been trying to get to work with wake-on-lan. The card is Marvel 88E8053 using the sky2 module. Although WOL is enabled in BIOS and ethtool shows the card as WOL enabled, it refuses to wake when I send the magic packet. I have verified that the packet is being… >>> More
How does cross domain authentication work in a firewalled environment?

as seen on Server Fault - Search for 'Server Fault'
This is a simplification and the names have been changed to protect the innocent. The assets: Active Directory Domains corp.lan saas.lan User accounts user01@corp.lan user02@corp.lan Servers dc.corp.lan (domain controller) dc.saas.lan (domain controller) server.saas.lan A one way trust exists… >>> More
Setting up Lan within a Lan

as seen on Server Fault - Search for 'Server Fault'
How unreasonable would it be to setup a small LAN within an existing LAN? I'm setting up a series of video surveillance servers and a number of IP cameras in a client's location and cannot have my equipment on the same network as their local machines. My network is essentially self-contained and… >>> More
OpenVPN Bridge LAN-to-LAN Configuration?

as seen on Super User - Search for 'Super User'
I'm trying to configure an OpenVPN bridge LAN-to-LAN setup. Currently, I have the OpenVPN bridge Server/Client setup up running. On the server-side my br-lan interface has tap0, eth0, and wlan0 in the bridge group. On the client-side the br-lan interface has eth0 and wlan0 in the bridge group,… >>> More
Cisco ASA (Client VPN) to LAN - through second VPN to second LAN

as seen on Server Fault - Search for 'Server Fault'
We have 2 site that is linked by an IPSEC VPN to remote Cisco ASAs: Site 1 1.5Mb T1 Connection Cisco(1) 2841 Site 2 1.5Mb T1 Connection Cisco 2841 In addition: Site 1 has a 2nd WAN 3Mb bonded T1 Connection Cisco 5510 that connects to same LAN as Cisco(1) 2841. Basically, Remote Access (VPN)… >>> More

Related posts about dell-poweredge

How to speed up boot sequence on a Dell PowerEdge 1950

as seen on Server Fault - Search for 'Server Fault'
Everytime I had to reboot one of the Dell PowerEdge 1950 we have, there are very long tests and with them the boot sequence becomes incredibly long. Is there a way to turn off all these tests (or at least speeding them up) ? >>> More
Dell Poweredge 2650 RAM Upgrade

as seen on Server Fault - Search for 'Server Fault'
Hi, I bought an old Dell Poweredge 2650 off ebay to use as a dev server, but I need to get more RAM for it. From what I understand there were 2 versions of the 2650 released, with the older version only supporting PC1600 RAM (200MHz) and the 2nd version supporting PC2400. Unfortunately Dell thought… >>> More
How do you get - Better than 1024x768 Driver for 64 bit Dell PowerEdge Server

as seen on Super User - Search for 'Super User'
How do you get better than 1024x768 resolution? Just installed MS Server 2008 64bit on a Dell PowerEdge 64bit box (works OK - Previously running MS Server 2003 32bit) After install - gives a a max resultion of 1024x768 I want to change the reslution to 1280x1024 (Same LCD Worked OK on server 2003) When… >>> More
Help to set up RAID on a DELL Poweredge 400SC

as seen on Server Fault - Search for 'Server Fault'
I have a FastTrak S150 TX2 raid controller that I have downloaded the driver for. I am installing WinXP fresh but don't have a floppy disk. Is there another way to load these drivers on boot? Anyone? Anyone at all... >>> More
Can the Dell PowerEdge T320 boot from a USB stick in hard drive emulation mode?

as seen on Server Fault - Search for 'Server Fault'
I am trying to install FreeNAS on a Dell PowerEdge T320. I've followed the instructions here (http://doc.freenas.org/index.php/Burning_an_IMG_File) to write the .img file to four different USB sticks with dd if=FreeNAS-9.2.1.5-RELEASE-x64.img of=/dev/sde, but I can't boot off of any of them. When… >>> More