S.M.A.R.T - Predictive Failure Count

Posted by Bastien974 on Server Fault See other posts from Server Fault or by Bastien974
Published on 2012-02-21T16:48:59Z Indexed on 2013/11/05 15:58 UTC
Read the original article Hit count: 330

Filed under:

raid

|

ibm

|

serveraid

|

drive-failure

I'm monitoring my IBM ServeRAID M5015 controller for RAID status with MegaCLI, I have this on one of the disk :

Enclosure Device ID: 252
Slot Number: 6
Enclosure position: 0
Device Id: 14
Sequence Number: 2
Media Error Count: 32
Other Error Count: 0
Predictive Failure Count: 18
Last Predictive Failure Event Seq Number: 8119
PD Type: SAS
Raw Size: 279.396 GB [0x22ecb25c Sectors]
Non Coerced Size: 278.896 GB [0x22dcb25c Sectors]
Coerced Size: 278.464 GB [0x22cee000 Sectors]
Firmware state: Online, Spun Up
SAS Address(0): 0x5000c50042c319c9
SAS Address(1): 0x0
Connected Port Number: 5(path0)
Inquiry Data: IBM-ESXSST9300653SS     B6336XN04HC10525B633
IBM FRU/CRU: 81Y9671
FDE Capable: Not Capable
FDE Enable: Disable
Secured: Unsecured
Locked: Unlocked
Needs EKM Attention: No
Foreign State: None
Device Speed: 6.0Gb/s
Link Speed: 6.0Gb/s
Media Type: Hard Disk Device
Drive:  Not Certified
Drive Temperature :33 Celsius

What does this mean exactly ? I can't find an exact description, is there a way to have more details ? The RAID array has the Optimal state.

Media Error Count: 32

Predictive Failure Count: 18

Is there a way through the CLI to power-on the front LED so I physically know which disk I need to replace ?

© Server Fault or respective owner

Related posts about raid

Booting from integrated RAID controller when another RAID controller is installed in a PCIe slot

as seen on Server Fault - Search for 'Server Fault'
I have a GA MA785GT UD3H motherboard with Windows Server 2008 R2 installed on a RAID1 using the on-board RAID controller. I have now installed a RocketRaid 2680 controller and set up a RAID5 for all my data to be stored on. Unfortunately I now cannot boot from the RAID1 anymore, the PC is trying… >>> More
Onboard RAID vs Software RAID

as seen on Server Fault - Search for 'Server Fault'
My motherboard, an Asus M4a79t Deluxe, advertises RAID 0/1/5 capabilities. My limited understanding is that onboard RAID is better than software RAID. Is this necessarily true? Is an onboard RAID controller closer in performance to a software controller or a dedicated hardware controller? >>> More
RAID-1 and regular drive removal (using RAID-1 as a backup measure)

as seen on Super User - Search for 'Super User'
Is using mdadm's RAID-1 of 2 partitions (one on laptop's internal HDD, one on external HDD) a good idea. I want the system to work as RAID-1 if both drives are present, work as regular volume (degradad RAID-1) if external HDD is unplugged and quickly resync when I plug external HDD again. Questions: Is… >>> More
Explain difference in SQLIO numbers for RAID 0 versus RAID 5 over 6 disks

as seen on Stack Overflow - Search for 'Stack Overflow'
When using the SQLIO benchmark tool on a 4-core Dell server with 6 15k 450GB (fast) drives, RAID 0, we found the max throughput was 2MB per second. But when configured as RAID 5, we get 30 MB per second. It seems that the RAID controller, Dell Perc 5i integrated controller, is maxing out the… >>> More
RAID 5 RECONSTRUCT with RAID Reconstructor

as seen on Server Fault - Search for 'Server Fault'
I have Dell Poweredge server 2600 with Raid 5 in 3 hard drive Scsi 36gb each, it was fail to boot sinc the third drive is offline. I attached Sata card adapter to Sata hard drive and install OS SERVER 2003 to it, downloaded drivers for Raid and everything goes fine when I use recovery data software… >>> More

Related posts about ibm

An Open Letter from Lyle Ekdahl, Group Vice President and General Manager, Oracle's JD Edwards

as seen on Oracle Blogs - Search for 'Oracle Blogs'
From Lyle Ekdahl, Group Vice President and General Manager, Oracle's JD Edwards As you may have heard, we recently announced some changes to the way Oracle will offer licensing of technology products with JD Edwards EnterpriseOne. Specifically, we have withdrawn from new sales the product known… >>> More
Websphere federated repository for Active Directory

as seen on Server Fault - Search for 'Server Fault'
Hi, What I am trying to achieve is to have Websphere 6.1 use Active Directory users authentication. Websphere is running on Windows 2008 R2. What I've done already: Succesfully setup a federated repository for Windows Active Directory (LDAP); Create a realm definition for the federated repository… >>> More
IBM InfoPrint 1532 Printer And IBM InfoPrint 1532 Laser Toner - Amazing Functionality And Affordabil

as seen on Article City - Search for 'Article City'
The IBM InfoPrint 1532 printer is the advanced version of the Express printer models. IBM introduced additional features to the InfoPrint monochrome laser series and this printer came about. This dev... [Author: Ben Pate - Computers and Internet - March 21, 2010] >>> More
IBM Keynote: (hardware,software)–>{IBM.java.patterns}

as seen on Oracle Blogs - Search for 'Oracle Blogs'
On Sunday evening, September 30, 2012, Jason McGee, IBM Distinguished Engineer and Chief Architect Cloud Computing, along with John Duimovich IBM Distinguished Engineer and Java CTO, gave an information- and idea-rich keynote that left Java developers with much to ponder.Their focus was on the challenges… >>> More
Getting NoClassdef on HMAC_SHA1 in Webpshere

as seen on Stack Overflow - Search for 'Stack Overflow'
We have WAS 6.0 (I know) .2.43 ND running in multiple regions. Our Dev-B region runs fine, but Dev-C throws a java exception when we make web-calls (at least this is what the developer tells me)...Same code in both regions and I checked the obvious suspects (Global security, SSL ciphers etc) and… >>> More