Unneeded RAID recovery

Posted by Shinhan on Ask Ubuntu See other posts from Ask Ubuntu or by Shinhan
Published on 2013-11-07T09:38:37Z Indexed on 2013/11/07 10:17 UTC
Read the original article Hit count: 189

Filed under:

raid

|

mdadm

I have two software RAID 5s.

Today when I turned on my server (after it was off for two weeks when I was on vacation), I got the message that the software RAID is degraded and was offered RAID recovery console or boot degraded.

No idea what to do in that recovery console btw, so I just exited it.

After the boot finished normally I took a peak at /proc/mdstat but there is nothing amiss there.

So I took a look at mdadm --detail /dev/md0 (and md1) and again everything looks fine with Failed Devices being 0 both times.

Next I took a look at smartctl --alll /dev/sdX for all of the drives and Reallocated_Sector_Ct is 0. (Lots of other zeros, all numbers look to me fine)

Anybody have any ideas why I'm getting the RAID recovery message on boot when nothing seems bad?

© Ask Ubuntu or respective owner

Related posts about raid

Booting from integrated RAID controller when another RAID controller is installed in a PCIe slot

as seen on Server Fault - Search for 'Server Fault'
I have a GA MA785GT UD3H motherboard with Windows Server 2008 R2 installed on a RAID1 using the on-board RAID controller. I have now installed a RocketRaid 2680 controller and set up a RAID5 for all my data to be stored on. Unfortunately I now cannot boot from the RAID1 anymore, the PC is trying… >>> More
Onboard RAID vs Software RAID

as seen on Server Fault - Search for 'Server Fault'
My motherboard, an Asus M4a79t Deluxe, advertises RAID 0/1/5 capabilities. My limited understanding is that onboard RAID is better than software RAID. Is this necessarily true? Is an onboard RAID controller closer in performance to a software controller or a dedicated hardware controller? >>> More
RAID-1 and regular drive removal (using RAID-1 as a backup measure)

as seen on Super User - Search for 'Super User'
Is using mdadm's RAID-1 of 2 partitions (one on laptop's internal HDD, one on external HDD) a good idea. I want the system to work as RAID-1 if both drives are present, work as regular volume (degradad RAID-1) if external HDD is unplugged and quickly resync when I plug external HDD again. Questions: Is… >>> More
Explain difference in SQLIO numbers for RAID 0 versus RAID 5 over 6 disks

as seen on Stack Overflow - Search for 'Stack Overflow'
When using the SQLIO benchmark tool on a 4-core Dell server with 6 15k 450GB (fast) drives, RAID 0, we found the max throughput was 2MB per second. But when configured as RAID 5, we get 30 MB per second. It seems that the RAID controller, Dell Perc 5i integrated controller, is maxing out the… >>> More
RAID 5 RECONSTRUCT with RAID Reconstructor

as seen on Server Fault - Search for 'Server Fault'
I have Dell Poweredge server 2600 with Raid 5 in 3 hard drive Scsi 36gb each, it was fail to boot sinc the third drive is offline. I attached Sata card adapter to Sata hard drive and install OS SERVER 2003 to it, downloaded drivers for Raid and everything goes fine when I use recovery data software… >>> More

Related posts about mdadm

apt-get update mdadm scary warnings

as seen on Server Fault - Search for 'Server Fault'
Just ran an apt-get update on one of my dedicated servers to be left with a relatively scary warning: Processing triggers for initramfs-tools ... update-initramfs: Generating /boot/initrd.img-2.6.26-2-686-bigmem W: mdadm: the array /dev/md/1 with UUID c622dd79:496607cf:c230666b:5103eba0 W: mdadm:… >>> More
mdadm+zfs vs mdadm+lvm

as seen on Server Fault - Search for 'Server Fault'
This may be a naive question since I'm new to this and I cannot find any results about mdadm+zfs, but after some testing it seems it might work: The use case is a server with RAID6 for some data that is backed-up somewhat infrequently. I think I'm well served by any of ZFS or RAID6. Platform is Linux… >>> More
Upon reboot, Linux software raid fails to include one device of a RAID1 array

as seen on Super User - Search for 'Super User'
One of my four Linux software raid arrays drops one of its two devices when I reboot my system. The other three arrays work fine. I am running RAID1 on kernel version 2.6.32-5-amd64 (Debian Squeeze). Every time I reboot, /dev/md2 comes up with only one device. I can manually add the device by saying… >>> More
Linux software raid fails to include one device for one RAID1 array

as seen on Server Fault - Search for 'Server Fault'
One of my four Linux software raid arrays drops one of its two devices when I reboot my system. The other three arrays work fine. I am running RAID1 on kernel version 2.6.32-5-amd64. Every time I reboot, /dev/md2 comes up with only one device. I can manually add the device by saying $ sudo mdadm /dev/md2… >>> More
What tells initramfs or the Ubuntu Server boot process how to assemble RAID arrays?

as seen on Server Fault - Search for 'Server Fault'
The simple question: how does initramfs know how to assemble mdadm RAID arrays at startup? My problem: I boot my server and get: Gave up waiting for root device. ALERT! /dev/disk/by-uuid/[UUID] does not exist. Dropping to a shell! This happens because /dev/md0 (which is /boot, RAID 1) and /dev/md1… >>> More