Trunking between Juniper Ex3300 with Cisco Router

Posted by danijuntak on Server Fault See other posts from Server Fault or by danijuntak
Published on 2014-06-05T08:38:39Z Indexed on 2014/06/05 9:28 UTC
Read the original article Hit count: 288

Filed under:

vlan

|

juniper

Hy Experts,

Please tell how to create trunking with Juniper and Cisco.

Cisco 2950 > Juniper EX3300 > Cisco 2621 I create VLAN 100,VLAN 200, VLAN 300

I have create trunk on juniper switch with : set interfaces ge-0/0/2 unit 0 family ethernet-switching vlan members

root@switch# set interfaces ge-0/0/23 unit 0 family ethernet-switching port-mode trunk

Now I want to telnet Juniper Switch from PC, but I don't know how to give IP address to Juniper switch and how to assign IP to vlan on Juniper switch.

© Server Fault or respective owner

Related posts about vlan

Cisco vlan entry missing in vlan.dat, but appears in running-config

as seen on Server Fault - Search for 'Server Fault'
One of our vlan's (ID: 104) stopped working suddenly and computers on that vlan failed when trying to obtain a dhcp ip address. On the Cisco switch if we do show vlan, this command is supposed to shows the vlans in the vlan.dat file. We notice it has every other vlan except the one that is now missing… >>> More
Unable to access VLAN host from VLAN interface in CentOS

as seen on Server Fault - Search for 'Server Fault'
I am playing with VLAN (Virtual LAN) configuration on CentOS 6.4. I have 2 interfaces, eth0 and eth1. I have configured 2 VLAN interfaces eth0.20 and eth0.30 as #file: ifcfg-eth0.20 #------------- VLAN=yes DEVICE=eth0.20 TYPE=Ethernet ONBOOT=yes NM_CONTROLLED=no BOOTPROTO=static IPADDR=192.168… >>> More
Multiple vlans access to shared pbx system

as seen on Server Fault - Search for 'Server Fault'
I'm new to networking and was looking for some assistance. First off I'm using packet tracer to diagram my scenario as I will be receiving my equipment next week to deploy. Hardware to be used: 2 catalyst 3560 switches all connect to a sonic wall router I have two companies that work in the… >>> More
VLAN ID 4095 for guest VLAN tagging

as seen on Server Fault - Search for 'Server Fault'
Just want to know if it's true that if you use the VLAN ID 4095 for guest VLAN tagging, then vMotion will not work correctly as there is nowhere to pass back the reverse arp to? So, the problem we have noticed is when we have vmotioned VM's that are tagged on our trunk network, you cannot ping them… >>> More
vlan change via scvmm not working

as seen on Server Fault - Search for 'Server Fault'
Hi i have a windows 2008 R2 hyper-v server which is managed via scvmm 2008 R2. the guest os running on the hyper-v server is winxp with sp3. if i change the vlan id via scvmm the guest doesn't get an ip via dhcp i looked in the properties of the vm with the hyper-v mmc an see the vlan changed correctly… >>> More

Related posts about juniper

SSRS Export to Excel not working through VPN (Juniper SA4000)

as seen on Server Fault - Search for 'Server Fault'
We have a SharePoint (MOSS 2007 on Win2003 R2) with SSRS reports (from SQL 2005) embedded in it. When we connect to the SharePoint portal through our VPN (firewall is Juniper SA4000) and using Internet Explorer (6, 7, and 8) and try to export any SSRS report under Excel, we get an error message: Internet… >>> More
Cisco PIX to Juniper Netscreen Policy-based VPN fails Phase 2 Proposal

as seen on Server Fault - Search for 'Server Fault'
I've followed the instructions to configure a VPN between a netscreen device and a Cisco PIX as directed by Cisco's [netscreen to PIX VPN]http://www.cisco.com/en/US/tech/tk583/tk372/technologies_configuration_example09186a00801c4445.shtml article. The only differences are that I'm running PIX 6.3(5)… >>> More
Juniper SSL-VPN Application Data encoding

as seen on Server Fault - Search for 'Server Fault'
Hi, I want to know how the request & response from the VPN server on e.g.: https://host.tld/dana/jw?con=1234567890&seqno=7 is encoded, the output seems to be binary. I assume it is the application data which gets exchanged with this request, am I right in this? If not, what else gets transferred… >>> More
What is the equivalent of Cisco's 'ip virtual-reassembly' for a Juniper ISG 2000

as seen on Server Fault - Search for 'Server Fault'
I tested my dns servers with the oarc test and my size limit is at least 1403 bytes. I performed the same test before my Juniper ISG 2000 and the result is 2047 bytes. According to the chapter IP "Fragments Filtered" and this article, I think I have a fragmentation problem. This article talks about… >>> More
Juniper SSG5 find bandwidth eater

as seen on Server Fault - Search for 'Server Fault'
Hello forum, I looking for a way to get the list of the top bandwidth eater on my Juniper ssg5. On my old OpenBSD Box I had a command line version of ntop. It was just perfect. How can I do the same thing whith the SSG? Thank you ! >>> More