Search Results

Search found 11 results on 1 pages for '3molo'.

Page 1/1 | 1 

• Setup of HP ProCurve 2810-24G for iSCSI?

  - by 3molo

  Hi, I have a pair of ProCurve 2810-24G that I will use with a Dell Equallogic SAN and Vmware ESXi. Since ESXi does MPIO, I am a little uncertain on the configuration for links between the switches. Is a trunk the right way to go between the switches? I know that the ports for the SAN and the ESXi hosts should be untagged, so does that mean that I want tagged VLAN on the trunk ports? This is more or less the configuration: trunk 1-4 Trk1 Trunk snmp-server community "public" Unrestricted vlan 1 name "DEFAULT_VLAN" untagged 24,Trk1 ip address 10.180.3.1 255.255.255.0 no untagged 5-23 exit vlan 801 name "Storage" untagged 5-23 tagged Trk1 jumbo exit no fault-finder broadcast-storm stack commander "sanstack" spanning-tree spanning-tree Trk1 priority 4 spanning-tree force-version RSTP-operation The Equallogic PS4000 SAN has two controllers, with two network interfaces each. Dell recommends each controller to be connected to each of the switches. From vmware documentation, it seems creating one vmkernel per pNIC is recommended. With MPIO, this could allow for more than 1 Gbps throughput.

  Read the article

• Temporarily disable an AD server

  - by 3molo

  Topology and setup We have main office A, and branch office (abroad) B. Our ISP somehow messed up the MPLS, and office A<B will not be connected until a few days. At location B, we have an AD (and the other two ADs at location A). Location A also have an exchange server. The problems A few users at A have problem to login to their computers running Windows XP, the logon process kind of hangs where "Applying computer policies". Additionally, I can't start the Exchange management shell, it fails on get-recipient because the AD abroad (location B) is unreachable. Solution? I could delete the AD at B, but Im pretty sure it will be a hazzle to re-join it, and since the office is abroad it's not an option to just go there and re-install it - re join, I now wonder how I in location As primary and secondary ADs can temporarily disable AD at location B.

  Read the article

• Cant logon to domain over site-to-site vpn

  - by 3molo

  Tied together branch office with main office over two Cisco ASAs. The (internal) networks on either side can communicate with the other. I can ping, use the DC's DNS service and even join a domain on a new client. I can't however logon, I get the "domain controller is not available" error message on client. I find nothing peculiar in DC's event logs. Sicne it's site-to-site (with ping), it's always up so it should work. No firewall rules (except allow any any) between the two networks (of either side). Main site internal net: 10.10.10.0/24 Branch office net: 10.180.3.0/24 Am I overlooking something here? Where should I start investigating this?d

  Read the article

• Windows 2008 R2 DS in 2003 domain?

  - by 3molo

  Hi, Having a master domain controller running Windows 2003, and now I'd like to set up a new domain controller on a branch office. I really only have access to licenses for Windows 2008 R2 (through licensing.microsoft.com), so question is if a newly installed Windows 2008 Standard R2 can become a domain controller in the existing (2003) domain? First I tried adprep /forestprep on the newly installed 2008, but it complained about not being a domain controller. I then tried dcpromo, but it too complained about it. According to MS documentation, it seems I have to run 'adprep /forestprep' on the master domain controller, and adprep is located in 2008 installation DVD. Am I on the right track? Is the correct way to mount the 2008 installation dvd into the existing 2003 master controller, and run 'adprep /forestprep' on it there? Will I be able to run dcpromo on the 2008 once that has been completed? Thanks,

  Read the article

• MS DNS lookup issue

  - by 3molo

  Hi, Got two AD/DNS servers, and on the secondary I can't seem to lookup the external site www.iis.se (or any other hostname that their name servers control). The central firewall at this office allows any any outbound, tcp and udp. The DNS server has no local firewall nor antivirus. My windows client, located in the same subnet as the DNS server can do the lookup by asking the nameservers that are in control of www.iis.se. 'dig NS iis.se' shows iis.se. 2517 IN NS ns2.nic.se. iis.se. 2517 IN NS ns.nic.se. iis.se. 2517 IN NS ns3.nic.se. on AD/DNS server C:\Users\Administratornslookup www.iis.se 212.247.7.228 Server: UnKnown Address: 212.247.7.228 Name: www.iis.se Addresses: 2a00:801:f0:80::80 212.247.7.221 C:\Users\Administratornslookup www.iis.se 194.17.45.54 Server: UnKnown Address: 194.17.45.54 Name: www.iis.se Addresses: 2a00:801:f0:80::80 212.247.7.221 C:\Users\Administratornslookup www.iis.se 212.247.3.83 Server: UnKnown Address: 212.247.3.83 Name: www.iis.se Addresses: 2a00:801:f0:80::80 212.247.7.221 And still: C:\Users\administratornslookup www.iis.se Server: UnKnown Address: 127.0.0.1 DNS request timed out. timeout was 2 seconds. DNS request timed out. timeout was 2 seconds. * Request to UnKnown timed-out

  Read the article

• XenServer/Center: Shared SRs for hosts not in same pool?

  - by 3molo

  I would like to use the same SRs on XenServer hosts that are not able to be part of the same pool (because of not having the exact same cpu feature set, if I understand it correctly) in order to share templates, being able to (manually) start a host on another node, backing up running hosts on other hardware etc etc. The technology for SR can be any of iSCSI, NFS or CIFS, iSCSI would obviously be preferred. Trying to add an iSCSI volume renders a "This LUN is already in use as SR iSCSI - Shared Storage on pool xxxxxx.". Adding a NFS share on one XS host, creating a template there and then checking another XS host reveals they don't agree on used space etc. Coming from a vSphere world this is quite baffling, but if these are limitations then I will have to rethink some of the concepts for this low budget project.

  Read the article

• Newly configured MSSQL2008, TIME_WAIT but no ESTABLISHED?

  - by 3molo

  Windows 2008 R2, standard. No firewall locally on it. Newly setup because an old SQL2000 had two disks die (or could it be the raid controller?) at the same time. Luckily, I had fresh backups. The databases have been restored, and SP2 for SQL2008 applied. I can see various hosts trying to establish a session, but the (customer) sites does not work and I don't see the expected established sessions. A wireshark reveals a full three-way handshake. Since it's customer machines connecting, I cannot logon to them and restart application pools.. What on earth could be causing this? No. Time Source Destination Protocol Info 1 0.000000 1.2.5.127 1.2.6.133 TCP desktop-dna > ms-sql-s [SYN] Seq=0 Win=65535 Len=0 MSS=1380 SACK_PERM=1 Frame 1: 62 bytes on wire (496 bits), 62 bytes captured (496 bits) Ethernet II, Src: Cisco_31:5e:09 (00:26:0b:31:5e:09), Dst: Vmware_b7:00:05 (00:50:56:b7:00:05) Internet Protocol, Src: 1.2.5.127 (1.2.5.127), Dst: 1.2.6.133 (1.2.6.133) Transmission Control Protocol, Src Port: desktop-dna (2763), Dst Port: ms-sql-s (1433), Seq: 0, Len: 0 No. Time Source Destination Protocol Info 2 0.000123 1.2.6.133 1.2.5.127 TCP ms-sql-s > desktop-dna [SYN, ACK] Seq=0 Ack=1 Win=8192 Len=0 MSS=1460 SACK_PERM=1 Frame 2: 62 bytes on wire (496 bits), 62 bytes captured (496 bits) Ethernet II, Src: Vmware_b7:00:05 (00:50:56:b7:00:05), Dst: Cisco_31:5e:09 (00:26:0b:31:5e:09) Internet Protocol, Src: 1.2.6.133 (1.2.6.133), Dst: 1.2.5.127 (1.2.5.127) Transmission Control Protocol, Src Port: ms-sql-s (1433), Dst Port: desktop-dna (2763), Seq: 0, Ack: 1, Len: 0 No. Time Source Destination Protocol Info 3 0.000884 1.2.5.127 1.2.6.133 TCP desktop-dna > ms-sql-s [ACK] Seq=1 Ack=1 Win=65535 Len=0 And netstat TCP 1.2.6.133:1433 1.2.2.98:26895 TIME_WAIT 0 TCP 1.2.6.133:1433 1.2.2.98:26912 TIME_WAIT 0 TCP 1.2.6.133:1433 1.2.2.98:26918 TIME_WAIT 0 TCP 1.2.6.133:1433 1.2.2.98:26931 TIME_WAIT 0 TCP 1.2.6.133:1433 1.2.5.127:2736 TIME_WAIT 0 TCP 1.2.6.133:1433 1.2.5.127:2737 TIME_WAIT 0 TCP 1.2.6.133:1433 1.2.5.127:2738 TIME_WAIT 0 TCP 1.2.6.133:1433 1.2.5.127:2739 TIME_WAIT 0

  Read the article

• Incredble low disk performance on HP DL385 G7

  - by 3molo

  Hi, As a test of the Opteron processor family, I bought a HP DL385 G7 6128 with HP Smart Array P410i Controller - no memory. The machine has 20GB ram 2x146GB 15k rpm SAS + 2x250GB SATA2, both in Raid 1 configurations. I run Vmware ESXi 4.1. Problem: Even with one virtual machine only, tried Linux 2.6/Windows server 2008/Windows 7, the VMs' feel really sluggish. With windows 7, the vmware converter installation even timed out. Tried both SATA and SAS disks and SATA disks are nearly unsusable, while SAS disks feels extremely slow.I can't see a lot of disk activity in the infrastructure client, but I haven't been looking for causes or even tried diagnostics because I have a feeling that it's either because of the cheap raid controller - or simply because of the lack of memory for it. Despite the problems, I continued and installed a virtual machine that serves a key function, so it's not easy to take it down and run diagnostics. Would very much like to know what you guys have to say of it, is it more likely to be a problem with the controller/disks or is it low performance because of budget components? Thanks in advance,

  Read the article

• migrating innodb ib* files to different server and distribution.

  - by 3molo

  One of our customers had a break in on an old centos 4.4 machine, so I booted a debian live cd and copied the whole /var/lib/mysql. I then, on a new debian, copied the desired database and ibdata+iblogfiles, and removed the "autoextend" bits from my.cnf - restarted mysql. But I get 'Incorrect information in file'. Paths are the same as the old centos server, and permissions and ownership is correct. What am I missing?

  Read the article

• Rescue system running TFS that BSODs, into vmware esxi

  - by 3molo

  Hi, After moving to new facilities, one of our old Dell servers running Windows Server 2003 R2 on PowerEdge 2650 HW BSODs with 0x8e. The server runs Team Foundation Server, so we have a few guys dependent on it. No one here knows TFS, so we have no idea how difficult it would be to setup from scratch. We have the MSSQL database(s) backed up, recent and fresh copy. Tried removing/refitting memory modules, but with no success. The system boots into safe mode but hangs occasionally. I booted a linux livecd and did a dd of both c: and d:, so I have all the data in compressed images on a vmware machine. For the guest, I created a 38G (actually it became 40GB) partition to act as C:, and booted a live cd. I then uncompressed the compressed disk image of c: and dd'd it to the new c: using 'gunzip -dc c.img.gz | dd of=/dev/sda1 bs=1M'. The operation ran for about 1000 seconds, and completed successfully. I assumed it would at least try to boot windows (but most likely BSOD due to not having correct drivers), but the Vmware ESXi guest does not seem to recognize it as a bootable disk. We don't have the vmware enterprise license, so the vmware converter cold cloning is not an option. Did I do something wrong in my dd's etc with the ISOs, or why would it not (try to) boot? Am I wasting my time? What other approach is there? Will continue to try to remove services and drivers to make the physical machine at least work reasonably well in safe mode. What do you suggest? 1. Continue to get the dd'd images to the virtual disk and get it to boot. 2. Install a new windows server, get team foundation server and restore from backup. 3. Focus on the old problematic hardware Any help appreciated

  Read the article

• dd cloned win2003 std ntfs partition, "no operating system found".

  - by 3molo

  I cloned an existing ntfs partition on faulty hardware using dd and gzip. The copied partition was then written to a newly created ntfs partition on a new disk (on another server) and the bootable flag was set. However, the "Operating system not found" (or is it No operating system found?) is what happens when I try to boot it.The faulty server is part of the AD domain, but I do not have the local administrator password, so I couldn't use the repair console of windows 2003 to fixmbr. I did try to do a normal repair during win2003 installation menu, but with no success. Both windows installation and Linux recognizes it as a ntfs partition of its true size, and files can be seen and read. I've done this a couple of times before, but I didn't encounter this problem. Of course I encountered other problems, like BSDO due to lack of hw drivers etc - but that was pretty easily fixed. Why am I failing to get the copied partition to even be recognized as a bootable disk on the new server?

  Read the article

1