Search Results

Search found 55 results on 3 pages for 'antoine lizee'.

Page 1/3 | 1 2 3  | Next Page >

• Tutoriel Java Web : Communication entre portlets (JSR 286) : le système d'évènements, par Antoine Se

  Cet article explique comment mettre en place une communication entre portlets basée sur le système d'évènements de la JSR 286. Les portlets de test sont développés dans eclipse avec le plugin WTP et déployés dans le portail JBoss portal.

  Read the article

• ACER ASPIRE ONE, WIFI Atheros Communications Inc. AR9462 problem with 12.10

  - by antoine

  I have an ACER ASPIRE ONE AO756-Series, equipped with A wifi controller Atheros Communications Inc. AR9462 Everything worked fine on 12.04, but when I upgraded to 12.10 I experimented some issues : * wifi does work ! * still, the wifi icon/menu does not react normally : 1) it is always grey, hence not indicating if connected or not, 2) It does not react to me clicking on it (disconnect, change the network, desactive wifi, etc) So it's not a critical issue because I can change the active wifi connection through control pannel, but it is very annoying. Do you know of an solution around this issue ? thanks a lot antoine

  Read the article

• Intel graphic chipset and NVIDIA Geforce GTX560

  - by antoine

  I have an NVIDIA Geforce GTX560 with two video projectors and I would like to use the onboard Intel Graphic Chipset to plug an additional monitor. I saw the question : How can I use both Intel onboard and Nvidia graphics at the same time? but the answer is so short that I was not convinced. My motherboard (GIGABYTE GA-H61M-D2P-B3 (rev. 1.0)) equipped with Intel H61 Chipset allow shared memory between onboard and PCIe cards. And Windows 7 allow me to use the three outputs thanks to Intel's driver. I'm able to use the onboard graphic card but without graphical interface for now. I think i need intel driver for that. But I would like to know if I can setup my displays in xorg.conf with something like : Section "Device" Identifier "Device0" Driver "intel" EndSection Section "Device" Identifier "Device1" Driver "nvidia" EndSection Section "Device" Identifier "Device2" Driver "nvidia" EndSection Does anyone have successfully setup something like that ? Or should I burn my head experimenting it by myself ? Or is there any good reasons to discouraged me to try ? Thanks for your help. Antoine PS : i'm using Ubuntu 10.10 for now, but I could switch to another version. PS2 : i also read this : Use 3 monitors w/built-in intel adapter + two old nvidia PCI cards on 10.10? which doesn't tell me more about the possibilities to use Intel Graphic and Nvidia at the same time EDIT : according to that : Can not get Dual Monitors to work on Different GPUs, I should be able to run two Xserver one on Intel the other on Nvidia. I will try and post the result here.

  Read the article

• Cisco ASA bonding/teaming/port-channel capabilities

  - by Antoine Benkemoun

  Hello, This seemed to me like a really simple question that I would be able to answer by myself but I have not been able to find any info on this subject. I have a Cisco ASA 5510 which has 4 FastEthernet interfaces. I was wondering if it would be possible to use 2 or 3 of these interfaces as a port-channel in order to agregate bandwidth for multiple VLANs. I have found no info on the Cisco website nor on Google. Is this just a stupid/crazy idea or am I missing something ? Thank you in advance for your help, Antoine

  Read the article

• How to pipe differently the body of the curl answer and the printed output?

  - by Antoine Lizée

  I would like to print in the command line some output of curl, like the http headers, followed by the body of the answer processed by a stdin/stdout program. For instance: Print the status code: curl -s -w "%{http_code} \\n" -o "/dev/null" http://myURL.com And then process the output with a json parsing tool: curl -s http://myURL.com | python -mjson.tool I would like to do both with one command, and I have the feeling that it may be possible thanks to the -o option that makes the difference between the output of curl and the actual answer from the query. The problem is that -o writes directly to a file. Somebody's got a hack?

  Read the article

• Cisco ASA not forwarding traffic from one interface to another

  - by Antoine Benkemoun

  Hello ServerFault, I am needing help in the configuration process of my Cisco ASA 5510. I have set up 4 Cisco ASA interconnected together via a big LAN. Each Cisco ASA has 3 or 4 LANs attached to them. The IP routing part is taken care of by OSPF. My problem is on another level. A computer connected to one of the LANs attached to an ASA has no problem communicating with the outside world. The outside world being anything "after" the ASA. My problem is that I am completely unable to have them communicate with another LAN connected to the same ASA. To rephrase this, I am unable to send traffic from one interface of a given ASA to another interface of the same ASA. My configuration is the following : ! hostname Fuji ! interface Ethernet0/0 speed 100 duplex full nameif outside security-level 0 ip address 10.0.0.2 255.255.255.0 no shutdown ! interface Ethernet0/1 speed 100 duplex full nameif cs4 no shutdown security-level 100 ip address 10.1.4.1 255.255.255.0 ! interface Ethernet0/2 speed 100 duplex full no shutdown ! interface Ethernet0/2.15 vlan 15 nameif cs5 security-level 100 ip address 10.1.5.1 255.255.255.0 ! interface Ethernet0/2.16 vlan 16 nameif cs6 security-level 100 ip address 10.1.6.1 255.255.255.0 ! interface Management0/0 speed 100 duplex full nameif management security-level 100 ip address 10.6.0.252 255.255.255.0 ! access-list nat_cs4 extended permit ip 10.1.4.0 255.255.255.0 any access-list acl_cs4 extended permit ip 10.1.4.0 255.255.255.0 any access-list nat_cs5 extended permit ip 10.1.5.0 255.255.255.0 any access-list acl_cs5 extended permit ip 10.1.5.0 255.255.255.0 any access-list nat_cs6 extended permit ip 10.1.6.0 255.255.255.0 any access-list acl_cs6 extended permit ip 10.1.6.0 255.255.255.0 any ! access-list nat_outside extended permit ip any any access-list acl_outside extended permit ip any 10.1.4.0 255.255.255.0 access-list acl_outside extended permit ip any 10.1.5.0 255.255.255.0 access-list acl_outside extended permit ip any 10.1.6.0 255.255.255.0 ! nat (outside) 0 access-list nat_outside nat (cs4) 0 access-list nat_cs4 nat (cs5) 0 access-list nat_cs5 nat (cs6) 0 access-list nat_cs6 ! static (outside,cs4) 0.0.0.0 0.0.0.0 netmask 0.0.0.0 static (outside,cs5) 0.0.0.0 0.0.0.0 netmask 0.0.0.0 static (outside,cs6) 0.0.0.0 0.0.0.0 netmask 0.0.0.0 ! static (cs4,outside) 10.1.4.0 10.1.4.0 netmask 255.255.255.0 static (cs4,cs5) 10.1.4.0 10.1.4.0 netmask 255.255.255.0 static (cs4,cs6) 10.1.4.0 10.1.4.0 netmask 255.255.255.0 ! static (cs5,outside) 10.1.5.0 10.1.5.0 netmask 255.255.255.0 static (cs5,cs4) 10.1.5.0 10.1.5.0 netmask 255.255.255.0 static (cs5,cs6) 10.1.5.0 10.1.5.0 netmask 255.255.255.0 ! static (cs6,outside) 10.1.6.0 10.1.6.0 netmask 255.255.255.0 static (cs6,cs4) 10.1.6.0 10.1.6.0 netmask 255.255.255.0 static (cs6,cs5) 10.1.6.0 10.1.6.0 netmask 255.255.255.0 ! access-group acl_outside in interface outside access-group acl_cs4 in interface cs4 access-group acl_cs5 in interface cs5 access-group acl_cs6 in interface cs6 ! router ospf 1 network 10.0.0.0 255.255.255.0 area 1 network 10.1.4.0 255.255.255.0 area 1 network 10.1.5.0 255.255.255.0 area 1 network 10.1.6.0 255.255.255.0 area 1 log-adj-changes ! There is nothing really complicated in this configuration. It just NATs from one interface to another and that's it. I have tried enabling same-security-traffic permit inter-interface but that doesn't help. I therefore must be missing something a little bit more complicated. Does anyone know why I cannot foward traffic from one interface to another ? Thank you in advance for your help, Antoine

  Read the article

• How to produce assets effectively on large Flash game projects?

  - by Antoine Lassauzay

  I have been working on Flash games professionally for two years now and somehow, having our artists producing assets the right way is one of our biggest challenge. More precisely, it is very hard to have them following any kind of structure and/or standards, nor taking into consideration performance. I would say also the most of our issues concerns UI and related animations. Our current workflow is (on a Facebook hidden object game) : Artists produce PSD and animate prototypes in Flash Artists re-organize their FLA files to be a bit more "programmer friendly" Programmers retouches assets until they have the right structure and export classes inside a SWC, from Flash Programmers try to improve performances, sometimes degrading the quality of game graphics Our main idea is to hire somebody dedicated to prepare assets for programmers but I am really looking forward to improving the pipeline. I was wondering if you guys have tips of any kind to improve this workflow, whether it be team organization, training, tools or tips with Flash. Any explanation on your asset pipeline is well appreciated too.

  Read the article

• Disable default error pages/error messages in IIS

  - by Antoine

  I have this web application (ASP.Net MVC 3) that on certain conditions returns a custom JSON string with a HTTP status code for an error (403, 415, 500). It is deployed on a Win 2008 R2 server with IIS 7.5 Initially I was gettting the standard HTML pages for the error instead of the JSON data. I removed the error pages for these errors in the app settings. But now my queries which should return some JSON data return a single error line. When the server gives me 403, I have the message "You do not have permission to view this directory or page." (simple line, no HTML around it). What can I do to deactivate this and finally get what the app is returning and not what the server wants to return?

  Read the article

• how to set owner and permission to a cryptsetup made device?

  - by Antoine Rodriguez

  I have an encrypted loopback volume. I need to mount and umount manually the volume so I use cryptsetup luksOpen and cryptsetup luksClose . However, When I invoke this command it pops up the /dev/mapper device under all the sessions under gnome/xfce/kde/unity ... And then it let the user to mount (with password), expulse and unmount the volume. It's quite annoying in a multi user server (you are working on your files and the volume is being unmounted). How can I define ownership and permission on the device ? I've tried chown and chmod approach witch gives nothing. Cryptsetup doesn't have any options that let you do that. crypttab auto mount the filesystem on boot witch is unwanted (only manual mount)

  Read the article

• how to get adobe flash fullscreen video fluid with an atom processor?

  - by Antoine Rodriguez

  My system has an atom N270 + intel i915 graphic card. Under Windows I can enjoy 720p bigbuckbunny youtube video fullscreen without any trouble. Under Ubuntu 12.04 I have laggy and choppy fullscreen video and choppy video when not fullscreen. I've seen that under ubuntu the cpu is almost always at 100% use. What I must do in order to have videos playing well under ubuntu ? I've already tried the following : Force flash gpu detection : (no result) : mkdir /etc/adobe echo "OverrideGPUValidation = 1" | sudo tee -a /etc/adobe/mms.cfg grub options (had results but not enough) : i915_enable_rc6=1 i915_enable_fbc=1 i915_lvds_downclock=1 pcie_aspm=force updated intel drivers (glasen ppa) Using chrome instead of firefox (had impact but not enough)

  Read the article

• Is there a way to display navmesh agent path in Unity?

  - by Antoine Guillien

  I'm currently making a prototype for a game I plan to develop. As far as I did, I managed to set up the navigation mesh and my navmeshagents. I would like to display the path they are following when setDestination() is fired. I did some researches but didn't find anything about it. EDIT 1 : So I instantiate an empty object with a LineRenderer and I have a line bewteen my agent and the destination. Still I've not all the points when the path has to avoid an obstacle. Furthermore, I wonder if the agent.path does reflect the real path that the agent take as I noticed that it actually follow a "smoothier" path. Here is the code so far : GameObject container = new GameObject(); container.transform.parent = agent.gameObject.transform; LineRenderer ligne = container.AddComponent<LineRenderer>(); ligne.SetColors(Color.white,Color.white); ligne.SetWidth(0.1f,0.1f); //Get def material ligne.gameObject.renderer.material.color = Color.white; ligne.gameObject.renderer.material.shader = Shader.Find("Sprites/Default"); ligne.gameObject.AddComponent<LineScript>(); ligne.SetVertexCount(agent.path.corners.Length+1); int i = 0; foreach(Vector3 v in p.corners) { ligne.SetPosition(i,v); //Debug.Log("position agent"+g.transform.position); //Debug.Log("position corner = "+v); i++; } ligne.SetPosition(p.corners.Length,agent.destination); ligne.gameObject.tag = "ligne"; So How can I get the real coordinates my agent is going to walk throught ?

  Read the article

• Problem executing script using Python and subprocces.call yet works in Bash

  - by Antoine Benkemoun

  Hello, For the first time, I am asking a little bit of help over here as I am more of a ServerFault person. I am doing some scripting in Python and I've been loving the language so far yet I have this little problem which is keeping my script from working. Here is the code line in question : subprocess.call('xen-create-image --hostname '+nom+' --memory '+memory+' --partitions=/root/scripts/part.tmp --ip '+ip+' --netmask '+netmask+' --gateway '+gateway+' --passwd',shell=True) I have tried the same thing with os.popen. All the variables are correctly set. When I execute the command in question in my regular Linux shell, it works perfectly fine but when I execute it using my Python scripts, I get bizarre errors. I even replaced subprocess.call() by the print function to make sure I am using the exact output of the command. I went looking into environment variables of my shell but they are pretty much the same... I'll post the error I am getting but I'm not sure it's relevant to my problem. Use of uninitialized value $lines[0] in substitution (s///) at /usr/share/perl5/Config/IniFiles.pm line 614. Use of uninitialized value $_ in pattern match (m//) at /usr/share/perl5/Config/IniFiles.pm line 628. I am not a Python expert so I'm most likely missing something here. Thank you in advance for your help, Antoine

  Read the article

• Why isn't the source code of programs shown in research papers released?

  - by Antoine

  Is there a reason why the source code of programs shown in research papers are not released ? I understand that research papers are more about the general idea of accomplishing something than implementation details, but I don't get why they don't release the code. For example, in this paper ends with: Results The human line drawing system is implemented through the Qt framework in C++ using OpenGL, and runs on a 2.00 GHz Intel dual core processor workstation without any additional hardware assistance. We can interactively draw lines while the system synthesizes the new path and texture. Do they keep the source code closed intentionally because of a monetization they intend to make with it, or because of copyright ?

  Read the article

• Why don't research papers that mention custom software release the source code?

  - by Antoine

  Is there a reason why the source code of softwares mentioned in research papers is not released ? I understand that research papers are more about the general idea of accomplishing something than implementation details, but I don't get why they don't release the code. For example, in this paper ends with: Results The human line drawing system is implemented through the Qt framework in C++ using OpenGL, and runs on a 2.00 GHz Intel dual core processor workstation without any additional hardware assistance. We can interactively draw lines while the system synthesizes the new path and texture. Do they keep the source code closed intentionally because of a monetization they intend to make with it, or because of copyright ?

  Read the article

• Ubuntu 14.04 : Lost my sound randomly tried a few commands and I think I failed

  - by Marc-Antoine Théberge

  I lost my sound the other day and I tried to delete pulseaudio then reinstall, then I tried to delete it and install alsa, It did not work and I had to reinstall everything; overall bad idea... now I can't have any sound. Should I do a fresh install? I don't know how to boot an usb drive with GRUB... Here's my sysinfo System information report, generated by Sysinfo: 2014-05-28 05:45:58 http://sourceforge.net/projects/gsysinfo SYSTEM INFORMATION Running Ubuntu Linux, the Ubuntu 14.04 (trusty) release. GNOME: 3.8.4 (Ubuntu 2014-03-17) Kernel version: 3.13.0-27-generic (#50-Ubuntu SMP Thu May 15 18:08:16 UTC 2014) GCC: 4.8 (i686-linux-gnu) Xorg: 1.15.1 (16 April 2014 01:40:08PM) (16 April 2014 01:40:08PM) Hostname: mark-laptop Uptime: 0 days 11 h 43 min CPU INFORMATION GenuineIntel, Intel(R) Atom(TM) CPU N270 @ 1.60GHz Number of CPUs: 2 CPU clock currently at 1333.000 MHz with 512 KB cache Numbering: family(6) model(28) stepping(2) Bogomips: 3192.13 Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx constant_tsc arch_perfmon pebs bts aperfmperf pni dtes64 monitor ds_cpl est tm2 ssse3 xtpr pdcm movbe lahf_lm dtherm MEMORY INFORMATION Total memory: 2007 MB Total swap: 1953 MB STORAGE INFORMATION SCSI device - scsi0 Vendor: ATA Model: ST9160310AS HARDWARE INFORMATION MOTHERBOARD Host bridge Intel Corporation Mobile 945GSE Express Memory Controller Hub (rev 03) Subsystem: ASUSTeK Computer Inc. Device 8340 PCI bridge(s) Intel Corporation NM10/ICH7 Family PCI Express Port 1 (rev 02) (prog-if 00 [Normal decode]) Intel Corporation NM10/ICH7 Family PCI Express Port 2 (rev 02) (prog-if 00 [Normal decode]) Intel Corporation NM10/ICH7 Family PCI Express Port 4 (rev 02) (prog-if 00 [Normal decode]) Intel Corporation 82801 Mobile PCI Bridge (rev e2) (prog-if 01 [Subtractive decode]) Intel Corporation NM10/ICH7 Family PCI Express Port 1 (rev 02) (prog-if 00 [Normal decode]) Intel Corporation NM10/ICH7 Family PCI Express Port 2 (rev 02) (prog-if 00 [Normal decode]) Intel Corporation NM10/ICH7 Family PCI Express Port 4 (rev 02) (prog-if 00 [Normal decode]) Intel Corporation 82801 Mobile PCI Bridge (rev e2) (prog-if 01 [Subtractive decode]) ISA bridge Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02) Subsystem: ASUSTeK Computer Inc. Device 830f IDE interface Intel Corporation 82801GBM/GHM (ICH7-M Family) SATA Controller [IDE mode] (rev 02) (prog-if 80 [Master]) Subsystem: ASUSTeK Computer Inc. Device 830f GRAPHIC CARD VGA controller Intel Corporation Mobile 945GSE Express Integrated Graphics Controller (rev 03) (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. Device 8340 SOUND CARD Multimedia controller Intel Corporation NM10/ICH7 Family High Definition Audio Controller (rev 02) Subsystem: ASUSTeK Computer Inc. Device 831a NETWORK Ethernet controller Qualcomm Atheros AR8121/AR8113/AR8114 Gigabit or Fast Ethernet (rev b0) Subsystem: ASUSTeK Computer Inc. Device 8324

  Read the article

• How to play the sound of an object sliding on another object for a variable duration

  - by Antoine

  I would like to add sound effects to a basic 2D game. For example, a stone sphere is rolling on wood surface. Let's say I have a 2 second audio recording of this. How could I use the sample to add sound for an arbitrary duration ? So far I have two solutions in mind: a/ record the sound for an amount of time that is greater than the maximum expected duration, and play only a part of it; b/ extract a small portion of the sample and play it in a loop for the duration of the move; however I'm not sure if it makes sense with an audio wave.

  Read the article

• What are the methods to estimate source code value?

  - by Antoine

  I've been working on some project on my free time for the past few months. Recently I've been approached by friends to build a startup, and this source code would be very valueable to us. As a co-founder, this code could count for something in the company's capital, and be exchanged for shares. But how can you estimate its value? Do you just multiply industry-standard wqges by the time I spent on it, or are there other methods?

  Read the article

• /lib/udev/net.agent causing high CPU usage

  - by Antoine Benkemoun

  We have a number of Soekris boxes running Debian Squeeze. They were installed through an automated process consisting of using deboostrap and copying it unto a Compact Flash card. We use puppet to manage the configuration of all these boxes. Before Debian Squeeze, they were running Voyage Linux which is just a "lighter" version of Debian. Since we have switched, we're seeing the /lib/udev/net.agent process take up an aweful lot of CPU. We have so far been unable to find any clue as to what this really does and why it's taking up some much CPU time. In htop we see the following : We are seeing absolutly no syslog messages related to this process so we're a bit lost... So, I am looking for pointers as to what this process does in general and what could be the potential cause of such CPU usage.

  Read the article

• Correctly configure nameservers with cPanel

  - by Marc-Antoine

  I just bought a VPS with cPanel/WHM. My hosting provider gave me 3 dedicated IP addresses with my plan. I read on the internet that I should use 2 IPs for my nameservers and the other one as the main IP for all my shared accounts. Could you tell me why I should do that ? What are the advantages of using IP addresses only for nameservers and another one only for my shared accounts instead of using the same IP for all my nameservers and shared account ? I'm asking because I don't want to use an IP for nothing. Thank you.

  Read the article

• How to index filenames, size and basic informations for every file on a network?

  - by Antoine

  I have several machines, most of then are Linux and one of them is under Mac OS X. Each machine has several internal hard drives, and I also have a few external hard drives. How can I reliably find files with setup ? External drives are not always plugged, but the files don't move often. Ideally I would like to be able to search the metadata given with the 'file' command, and move files over the network.

  Read the article

• How can I tag sequences inside videos?

  - by Antoine

  For example, let's say I find a sequence in a WWDC session (Apple videos) that explains a technical point very well. I would like to be able to store the exact range in the video, tag it with keywords, and manage all that information. And when I want to share this information, I could simply export to a plain English sentence: "Have a look at the video named …". It would be great to be able to launch a video player for local videos and go straight to the beginning of the sequence.

  Read the article

• Problem with intel chipset 4 serie and centos dealing with dual head

  - by Antoine

  I've a fujitsu lifebook S7220, it's been a while since i try to configure it to use a dual head with centos 5.4 x86_64. Everytime I try, the xserver crash... I've got an intel chipset mobile 4 serie (GMA 4500MHD, if I recall good!) When I do an lspci -v i've got these : 00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) (prog-if 00 [VGA controller]) Subsystem: Fujitsu Limited. Unknown device 1451 Flags: bus master, fast devsel, latency 0, IRQ 177 Memory at f2000000 (64-bit, non-prefetchable) [size=4M] Memory at d0000000 (64-bit, prefetchable) [size=256M] I/O ports at 1800 [size=8] Capabilities: [90] Message Signalled Interrupts: 64bit- Queue=0/0 Enable- Capabilities: [d0] Power Management version 3 00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) Subsystem: Fujitsu Limited. Unknown device 1451 Flags: bus master, fast devsel, latency 0 Memory at f2400000 (64-bit, non-prefetchable) [size=1M] Capabilities: [d0] Power Management version 3 My question is, anyone already got this problem and how did you fix it? Thank you for your answer!

  Read the article

• Firefox completes the address bar with content absent from my history

  - by Antoine

  I have set Firefox to complete the address bar with elements from the history only ( other options are: nothing, bookmarks, and a history+bookmarks). However, Firefox still continues to complete the address bar with elements that are no longer in my history. A search in the history returns 0 result for the incriminated string. How can I solve this without loosing my entire history? I have already tried shift+delete on the elements I would like to delete, without success. How can I find the source of a certain completion ? (like an SQL request in the sqlite3 files used to store history) I'm using Firefox 16.0.2 on OS X 10.8.2.

  Read the article

• Move OS from RAID5 array to RAID 1 arrays

  - by Antoine

  I want to give a last boost to my old ProLiant ML350 G5 server which just needs to be reliable for a few more year only ! With a defined budget of about 1500$ (I do not have more), i plan to replace the CPU (+ adding a second one), the battery cache of my raid controller (E200i), double the RAM, and change all hard drives. I have 7 HDD (SAS 10krpm, 72Gb) + 1 spare in RAID5, and my system is all FULL (no empty tray, full disks). in my current RAID5 array, I have 2 partitions: - 1 OS partition, 20Gb - 1 data partition, 350 Gb I plan to replace these 8 disks with : - 2 x 300Gb SAS 15krpm in RAID 1 (= 1 partition for OS) - 2 x 2Tb SATA 7.2krpm in RAID 1 (= 1 partition for DATA) My biggest constraint is that I have only 01 day to upgrade my server. Therefore, I'm looking for cloning all my files (OS + data partition) to my new arrays, i.e : - the OS partition shall be cloned to the RAID1 "2x300Gb array" - the data partition shall be cloned to the RAID1 "2x2Tb array" My second problem is that I need to physically remove all the old hard drives before inserting the new ones. I'm running Windows Server 2003 R2, and even if MS support will expire soon, I cannot buy a new licence and spent time in configuration. Obviously, with 1500$, I cannot also buy a new server that I could start configuring from now ! Thought about ASR (NTBackup), but I have no floppy drive (and do not really want to invest in one !) Thought about a clonezilla clone, and read this interesting link : Windows Server 2003 - move C: partition to a new SAS disk , but i'm not so confident in using Clonezilla with RAID5. What should be the best option to quickly and easily (if possible!) "copy/paste" my OS (so no need to reinstall and reconfigure all) and DATA / programs / services, etc... ? Thanks for your comments

  Read the article

• Livre gratuit à télécharger : Kanban et Scrum, par Henrik Kniberg et Mattias Skarin, traduit en fran

  Bonjour, Une traduction de Kanban and Scrum - making the most of both de Henrik Kniberg et Mattias Skarin publié par InfoQ a été faite bénévolement par Claude Aubry, Frédéric Faure, Antoine Vernois, et Fabrice Aimetti. Vous pouvez donc le télécharger gratuitement sur l'hébergement Developpez.com dédié aux contributions d'Henrik. Prochainement vous pourrez également le consulter entièrement en ligne Et bien sur, un grand merci aux 4 traducteurs pour c...

  Read the article

1 2 3  | Next Page >