Search Results

Search found 75 results on 3 pages for 'anurag srivastava'.

Page 1/3 | 1 2 3  | Next Page >

• Ubuntu 12.04, Can hear the sound but Sound option in settings shows no sound card

  - by Vivek Srivastava

  I have weired issue. I did a fresh installation of Ubuntu 12.04. Then I installed Nvidia drives for my graphics card. I executed the command "modprobe nvidia" after installing the Nvidia drivers and rebooted. After reboot, sound indicator in top panel is disabled and I can't control the volume from there. I opened Settings Sound and it does not show any sound card installed. However, I can hear the sound. Please help. Output of lspci | grep Audio 00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 01) 01:00.1 Audio device: NVIDIA Corporation GF110 High Definition Audio Controller (rev a1) Output of lsmod | grep snd snd_hda_codec_hdmi 32191 4 snd_hda_codec_realtek 73851 1 snd_hda_intel 33367 0 snd_hda_codec 134156 3 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel snd_hwdep 13668 1 snd_hda_codec snd_pcm 97188 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec snd_timer 29990 1 snd_pcm snd 78855 7 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer soundcore 15091 1 snd snd_page_alloc 18529 2 snd_hda_intel,snd_pcm

  Read the article

• I can't get over a resolution of 640x480 after upgrading to 12.04, how can I fix it?

  - by Sandeep Srivastava

  Ever since I upgraded to 12.04 my screen resolution has gone down to 640 x 480, even though I had higher resolutions before. My xrand output looks as below : sandeep@sandeep-desktop:~$ xrandr xrandr: Failed to get size of gamma for output default Screen 0: minimum 640 x 480, current 640 x 480, maximum 640 x 480 default connected 640x480+0+0 0mm x 0mm 640x480 0.0* How can I get higher resolutions, I know that my monitor support higher resolutions.

  Read the article

• unable to connect mobile broadband ubuntu 12.10

  - by Anurag Srivastava

  i recently installed ubuntu 12.10 on my desktop. now the mobile connection was not working, which i later found out to be a bug in modem manger so i downgraded it to v0.5.2 but still the problem persists. whenever i try connecting, the mobile broadband option gets automatically disabled. i have a bsnl EVDO connection, which i had to manually configure as the device was not automatically detected at first.

  Read the article

• Convert sqlalchemy row object to python dict

  - by Anurag Uniyal

  or a simple way to iterate over columnName, value pairs? My version of sqlalchemy is 0.5.6 Here is the sample code where I tried using dict(row), but it throws exception , TypeError: 'User' object is not iterable import sqlalchemy from sqlalchemy import * from sqlalchemy.ext.declarative import declarative_base from sqlalchemy.orm import sessionmaker print "sqlalchemy version:",sqlalchemy.__version__ engine = create_engine('sqlite:///:memory:', echo=False) metadata = MetaData() users_table = Table('users', metadata, Column('id', Integer, primary_key=True), Column('name', String), ) metadata.create_all(engine) class User(declarative_base()): __tablename__ = 'users' id = Column(Integer, primary_key=True) name = Column(String) def __init__(self, name): self.name = name Session = sessionmaker(bind=engine) session = Session() user1 = User("anurag") session.add(user1) session.commit() # uncommenting next line throws exception 'TypeError: 'User' object is not iterable' #print dict(user1) # this one also throws 'TypeError: 'User' object is not iterable' for u in session.query(User).all(): print dict(u) Running this code on my system outputs: sqlalchemy version: 0.5.6 Traceback (most recent call last): File "untitled-1.py", line 37, in <module> print dict(u) TypeError: 'User' object is not iterable

  Read the article

• problem in adding data to an array in Objective-C!!!

  - by anurag

  I am grappling with adding an NSData object to a NSMutable array. The code is executing fine but it is not adding the objects in the array.The code is as follows: NSData * imageData = UIImageJPEGRepresentation(img, 1.0); int i=0; do{ if([[tempArray objectAtIndex:i] isEqual:imageData]) { [tempArray removeObjectAtIndex:i]; } else { [tempArray addObject:imageData]; //NSLog(@"ANURAG %@",[tempArray objectAtIndex:0]); } }while(i<[tempArray count]) ; The NSLog statement shows the object added is null however the value of imageData is not null. I have defined the tempArray as a static memeber of the class in which this code is written. Is it because of the size of the data object as it is the data of an image????

  Read the article

• Innovating with Customer Needs Management

  - by Anurag Batra

  We're pleased to announce the addition of Agile Customer Needs Management (CNM) to the portfolio of PLM offerings by Oracle. CNM allows manufacturing companies to capture the voice of the customer and market, and arm their product designers with the information that they need to better meet customer requirements. It's an Enterprise 2.0 product that focuses on the quick information capture, ease of organizing information and association of that information with the product record - some of the key aspects of early stage innovation. Read on to learn more about this revolutionary new product that redefines how information is used to drive innovation.

  Read the article

• Command-line to list DNS servers

  - by Anurag Uniyal

  Is there a command to list dns servers? I tried $ cat /etc/resolv.conf # Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8) # DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN nameserver 127.0.0.1 $ cat /etc/network/interfaces # interfaces(5) file used by ifup(8) and ifdown(8) auto lo iface lo inet loopback But it doesn't list any servers, if I go to "Network GUI Tool", in Wireless section it lists "DNS 192.168.1.1 8.8.8.8 8.8.4.4" Can I get same information from command line? I am using Ubuntu 12.04 LTS

  Read the article

• Job Change Problem [closed]

  - by Anurag Jain

  I joined an organisation in April 2010. I just changed my job in January 2012. I was previously working with Java. But in my current organisation, the work is not in java. They told me in the interview that the work will be use Java technology. But this is not the case. I dont want to lose my previous Java experience. And moreover, in my current company , I am working on a language which is not used anywhere. I want to change again. Can anyone please help and guide me that will there be any issue now in changing the job again.?

  Read the article

• SQL SERVER – Solution – Puzzle – Challenge – Error While Converting Money to Decimal

  - by pinaldave

  Earlier I had posted quick puzzle and I had received wonderful response to the same. Today we will go over the solution. The puzzle was posted here: SQL SERVER – Puzzle – Challenge – Error While Converting Money to Decimal Run following code in SSMS: DECLARE @mymoney MONEY; SET @mymoney = 12345.67; SELECT CAST(@mymoney AS DECIMAL(5,2)) MoneyInt; GO Above code will give following error: Msg 8115, Level 16, State 8, Line 3 Arithmetic overflow error converting money to data type numeric. Why and what is the solution? Solution is as following: DECLARE @mymoney MONEY; SET @mymoney = 12345.67; SELECT CAST(@mymoney AS DECIMAL(7,2)) MoneyInt; GO There were more than 20 valid answers. Here is the reason. Decimal data type is defined as Decimal (Precision, Scale), in other words Decimal (Total digits, Digits after decimal point).. Precision includes Scale. So Decimal (5,2) actually means, we can have 3 digits before decimal and 2 digits after decimal. To accommodate 12345.67 one need higher precision. The correct answer would be DECIMAL (7,2) as it can hold all the seven digits. Here are the list of the experts who have got correct answer and I encourage all of you to read the same over hear. Fbncs Piyush Srivastava Dheeraj Abhishek Anil Gurjar Keval Patel Rajan Patel Himanshu Patel Anurodh Srivastava aasim abdullah Paulo R. Pereira Chintak Chhapia Scott Humphrey Alok Chandra Shahi Imran Mohammed SHIVSHANKER The very first answer was provided by Fbncs and Dheeraj had very interesting comment. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Pinal Dave, Readers Contribution, Readers Question, SQL, SQL Authority, SQL Query, SQL Scripts, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• OpenWorld Session: BPM Analytics - Process Dashboards, BAM and Intelligent Optimization

  - by Ajay Khanna

  Blog Contributed by Payal Srivastava, Oracle Product Mamagement   Margin of error for the business is shrinking dramatically. Business needs to accomplish more with less i.e. minimal investment with quick ROI. Learn how you can leverage Oracle BPM suite and complementary technologies to create a robust analytics capability to provide visibility into operations to  C-level executives and Operational managers. We will talk about BPM analytics options available today that will not only enhance the visibility but allow you to intelligently optimize the business process at design time as well as run time.  The session will share some exciting this on our roadmap.  Come meet with the Oracle team members  from Product Development (Avinash Dabholkar , Eric Hsiao) and Product Management (Payal Srivastava) at the session. We would like to hear  your questions/comments about  our offering and roadmap. BPM Analytics: Process Dashboards, BAM and Intelligent Optimization, Moscone South 308, 10/3/12 @11:45am – CON 8598

  Read the article

• NoClassDefFoundError: HttpClient 4 (APACHE)

  - by Pujan Srivastava

  Hello All, I am using HC APACHE. I have added both httpcore-4.0.1.jar and httpclient-4.0.1.jar in the classpath of netbeans. I am getting error: java.lang.NoClassDefFoundError: org/apache/http/impl/client/DefaultHttpClient My Code is as follows. Please help. import org.apache.http.client.HttpClient; import org.apache.http.client.ResponseHandler; import org.apache.http.client.methods.HttpGet; import org.apache.http.impl.client.BasicResponseHandler; import org.apache.http.impl.client.DefaultHttpClient; public class HttpClientManager { public HttpClient httpclient; public HttpClientManager() { this.init(); } public void init() { try { httpclient = new DefaultHttpClient(); } catch (Exception e) { e.printStackTrace(); } } public void getCourseList() { String url = "http://exnet.in.th/api.php?username=demoinst&ha=2b62560&type=instructor"; HttpGet httpget = new HttpGet(url); ResponseHandler<String> responseHandler = new BasicResponseHandler(); try { String responseBody = httpclient.execute(httpget, responseHandler); System.out.println(responseBody); } catch (Exception e) { } } }

  Read the article

• Web data grid of infragistic controls

  - by Vishal Srivastava

  Hi, I am working on a web project where i need to use web data grid of infragistic controls. I have problem to customise the header layout. I did not find event like InisalizeLayOut in ultrawebgrid. My problem is that i want to row in header. Please give me your valuable suggations. Thanks

  Read the article

• How to create temporary files on the client machine, from Web Application?

  - by Gaurav Srivastava

  I am creating a Web Application using JSP, Struts, EJB and Servlets. The Application is a combined CRM and Accounting Package so the Database size is very huge. So, in order to make Execution faster, I want prevent round trips to the Database. For that purpose, what I want to do is create some temporary XML files on the client Machine and use them whenever required. How can I do this, as Javascript do not permits me to do so. Is there any way of doing this? Or, is there any other solution which I can adopt in order to make my application Faster?

  Read the article

• How to build a Video Broadcaster, which can handle more than 20,000 viewers

  - by Gaurav Srivastava

  I want to broadcast Video from a web cam, over internet. The problem is, the Video will be viewed live by more than 20,000 people (expected). I have a very little experience with Red5 Broadcasting. I did some broadcasting using Red5 and Flash. It works fine for 1 or 2 viewers i.e. it is great for personal chatting/ video conferencing applications. But, when the number of viewers increases, the delay in Broadcasting also increases. I am experiencing a Delay addition of about 0.5 Seconds for every new user who joins the broadcast. Can any one suggest me some, better technologies on which I can work out this Live Broadcasting. I don't want to use http://www.ustream.com; I want to create one of my own, such tool. But thats always the last solution.

  Read the article

• Accidentally deletion of classes from XCode 3.2.5

  - by Alok Srivastava

  Accidentally my classes folder is deleted with reference from xcode(project). i try to recover them from trash but it was not present in trash. how ever i used svn for backup. but after check out the whole project when i try to run the project then it gives ann error 2012-06-05 09:46:59.651 Lisnx[527:207] Unknown class LisnxAppDelegate in Interface Builder file. 2012-06-05 09:46:59.652 Lisnx[527:207] Unknown class LisnxViewController in Interface Builder file. 2012-06-05 09:46:59.656 Lisnx[527:207] * Terminating app due to uncaught exception 'NSUnknownKeyException', reason: '[ setValue:forUndefinedKey:]: this class is not key value coding-compliant for the key viewController.'

  Read the article

• JComobox is not showing in the JDialog

  - by Pujan Srivastava

  I have 2 classes. when I put bold 3 lines in the method addCourses() the dialog does not show combobox in the Panel but when I remove from addCourses and put those bold lines in the constructor, JComboBox are shown in the Panel. But data will not show because data items updates to ComboBox will happen after Constructor is created. How can I solve this problem. this.mainPanel.add(courseCombo, BorderLayout.NORTH); this.mainPanel.add(sessionCombo, BorderLayout.CENTER); this.mainPanel.add(courseButton, BorderLayout.SOUTH); public class Updator { CourseListFrame clf = new CourseListFrame(); for(...){ clf.addContentsToBox(displayName, className); } clf.addCourses(); } and second class is public class CourseListFrame extends JDialog implements ActionListener { public JPanel mainPanel = new JPanel(new BorderLayout(2, 2)); public JButton courseButton = new JButton(("Submit")); public JComboBox courseCombo; public JComboBox sessionCombo; public Multimap<String, String> map; // = HashMultimap.create(); public static CourseListFrame courseListDialog; public CourseListFrame() { super(this.getMainFrame()); this.getContentPane().add(mainPanel); map = HashMultimap.create(); courseCombo = new JComboBox(); courseCombo.addItem("Select Courses"); courseCombo.addActionListener(this); sessionCombo = new JComboBox(); } public void addContentsToBox(String course, String session) { map.put(course, session); courseCombo.addItem(course); } public void actionPerformed(ActionEvent e) { JComboBox cb = (JComboBox) e.getSource(); String str = (String) cb.getSelectedItem(); setSessionCombo(str); } public void setSessionCombo(String course) { if (map.containsKey(course)) { sessionCombo.removeAllItems(); Iterator it = map.get(course).iterator(); while (it.hasNext()) { sessionCombo.addItem(it.next()); } } } public void addCourses() { this.mainPanel.add(courseCombo, BorderLayout.NORTH); this.mainPanel.add(sessionCombo, BorderLayout.CENTER); this.mainPanel.add(courseButton, BorderLayout.SOUTH); } public static void showCourseListDialog() { if (courseListDialog == null) { courseListDialog = new CourseListFrame(); } courseListDialog.pack(); courseListDialog.setVisible(true); courseListDialog.setSize(260, 180); } }

  Read the article

• How to Set Up an Online Ecommerce Store

  Online Ecommerce stores are gaining popularity these days. Their business is achieving exceptional heights. The reason behind their success is the lack of time that people in the present world have. ... [Author: Anurag Gupta - Web Design and Development - May 11, 2010]

  Read the article

• Windows 8.1 Enterprise Sysprep Error

  - by Anurag Shetti

  I am Trying to sysprep my WIndows 8.1 enterprise (MSDN) and i get the following errors I have upgraded the Windows 8 to windows 8.1 and the machine contains all the configuration for VS 2012 and rest Exact error Sysprep was not able to validate your windows installation Error msg line in log C:\Users\André>err 0x8007139f # as an HRESULT: Severity: FAILURE (1), FACILITY_WIN32 (0x7), Code 0x139f # for hex 0x139f / decimal 5023 ERROR_INVALID_STATE winerror.h # The group or resource is not in the correct state to # perform the requested operation. # 1 matches found for "0x8007139f" SYSPRP ActionPlatform::GetValue: Error from RegQueryValueEx on value SysprepMode under key HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Setup\Sysprep; dwRet = 0x2 I have searched the HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Setup\Sysprep But i coud'nt find anything for SYSprep mode The value for sysprep was (Value not set)

  Read the article

• df -h showing wrong output in GB

  - by Anurag Uniyal

  If I list df output for KB, MB and GB, they do not match e.g. $ df -k |grep xvdb /dev/xvdb1 12796048 732812 11413172 7% /xxx $ df -m |grep xvdb /dev/xvdb1 12497 716 11146 7% /xxx $ df -h |grep xvdb /dev/xvdb1 13G 716M 11G 7% /xxx 12796048 KB = 12496.14 MB so that is slight off but OK 12796048 KB = 12.2 GB, 12407 MB is also 12.2 GB so why df is showing 13 GB or am I missing something? Here is full df listing $ df -h Filesystem Size Used Avail Use% Mounted on /dev/xvda1 7.5G 1.7G 5.5G 24% / none 5.8G 128K 5.8G 1% /dev none 5.8G 0 5.8G 0% /dev/shm none 5.8G 44K 5.8G 1% /var/run none 5.8G 0 5.8G 0% /var/lock none 5.8G 0 5.8G 0% /lib/init/rw /dev/xvdb1 13G 716M 11G 6% /xxx Coreutils version seems to 7.4 as info coreutils shows This manual documents version 7.4 of the GNU core utilities,

  Read the article

• TCP failure on Solaris

  - by anurag kohli

  Hi All, I recently ran into a problem where a Solaris server could not establish a TCP socket on port 2126. From a packet capture I see this (note: A is a Solaris server, B is a router): A sends SYN to B B sends SYN, ACK to A Notice A (Solaris) does not acknowledge the SYN from B. Due to the business impact of the problem, I had to reboot the server to fix the problem. That said, I want to know the next time the problem occurs, what can I do to get a root cause (ie before server reboot)? Thanks in advance.

  Read the article

• Solaris 10: cannot ping to/from server

  - by anurag kohli

  All, I have a Solaris 10 server which is not reachable by IP (ie can't ping to/from the server). I believe I have the default route setup correctly. See below: # ifconfig -a lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1 inet 127.0.0.1 netmask ff000000 bge0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2 inet 192.168.62.100 netmask ffffff00 broadcast 192.168.62.255 ether 0:14:4f:b1:9b:30 # netstat -rn Routing Table: IPv4 Destination Gateway Flags Ref Use Interface -------------------- -------------------- ----- ----- ------ --------- 192.168.62.0 192.168.62.100 U 1 40 bge0 224.0.0.0 192.168.62.100 U 1 0 bge0 default 192.168.62.1 UG 1 0 127.0.0.1 127.0.0.1 UH 1 4 lo0 # # cat /etc/defaultrouter 192.168.62.1 I have verified layer1 and layer 2 are up on the switchport, and that it's on the correct VLAN. I have also checked the default gateawy (192.168.62.1) is in fact reachable since I can ping it from my PC: Pinging 192.168.62.1 with 32 bytes of data: Reply from 192.168.62.1: bytes=32 time=1ms TTL=254 Reply from 192.168.62.1: bytes=32 time=1ms TTL=254 Reply from 192.168.62.1: bytes=32 time=3ms TTL=254 Reply from 192.168.62.1: bytes=32 time=6ms TTL=254 I'm at a loss as to what is wrong. I would highly appreciated your assistance. Thank you very much.

  Read the article

• What does transactions per seconds for a load balancer mean

  - by Anurag

  I was looking at the product matrix of webmux 592G(load balancer). It says maximum connections per sec = 2.8M Maximum number of transactions = 100,000 What does the above numbers mean. Does above means that load balancer can have 2.8M connections open but only 100K of them will be active per seconds. Also incase any one has used webmux 592G do you guys know in practice how many connections it can have open and what qps it can serve

  Read the article

• Javascript object dependencies

  - by Anurag

  In complex client side projects, the number of Javascript files can get very large. However, for performance reasons it's good to concatenate these files, and compress the resulting file for sending over the wire. I am having problems in concatenating these as the dependencies are included after they are needed in some cases. For instance, there are 2 files: /modules/Module.js <requires Core.js> /modules/core/Core.js The directories are recursively traversed, and Module.js gets included before Core.js, which causes errors. This is just a simple example where dependencies could span across directories, and there could be other complex cases. There are no circular dependencies though. The Javascript structure I follow is similar to Java packages, where each file defines a single Object (I'm using MooTools, but that's irrelevant). The structure of each javascript file and the dependencies is always consistent: Module.js var Module = new Class({ Implements: Core, ... }); Core.js var Core = new Class({ ... }); What practices do you usually follow to handle dependencies in projects where the number of Javascript files is huge, and there are inter-file dependencies?

  Read the article

• StAX - Setting the version and encoding using XMLStreamWriter

  - by Anurag

  Hi, I am using StAX for creating XML files and then validating the file with and XSD. I am getting an error while creating the XML file: javax.xml.stream.XMLStreamException: Underlying stream encoding 'Cp1252' and input paramter for writeStartDocument() method 'UTF-8' do not match. at com.sun.xml.internal.stream.writers.XMLStreamWriterImpl.writeStartDocument(XMLStreamWriterImpl.java:1182) Here is the code snippet: XMLOutputFactory xof = XMLOutputFactory.newInstance(); try{ XMLStreamWriter xtw = xof.createXMLStreamWriter(new FileWriter(fileName)); xtw.writeStartDocument("UTF-8","1.0");} catch(XMLStreamException e) { e.printStackTrace(); } catch(IOException ie) { ie.printStackTrace(); } I am running this code on unix. Does anybody know how to set the version and encoding style.

  Read the article

• Memory leak with JAXB

  - by Anurag

  Hi, I am getting Out of Memory error: Memory Exception in thread "main" java.lang.OutOfMemoryError: Java heap space at org.apache.xerces.dom.CoreDocumentImpl.createElement(CoreDocumentImpl.java:564) I have a standalone Java program which fetches data from DB and create an XML file using DOM. I get the above error if the data fetched is huge, in my case it is 1,000,000 records. I have defined 2GB as heap size while calling the Java class from unix. I tried it with JAXB, but still do not any significant improvement. Any suggestions how to improve the code.

  Read the article

1 2 3  | Next Page >