Search Results

Search found 44 results on 2 pages for 'apu'.

Page 1/2 | 1 2  | Next Page >

  • AMD sort l'APU Z-60, un processeur spécialement conçu pour Windows 8

    AMD sort l'APU Z-60 un processeur spécialement conçu pour Windows 8, la société dévoile son fer de lance pour la conquête du marché des tablettes Tout comme Intel, AMD espère surfer sur la vague Windows 8 pour se faire une place dans le marché des tablettes largement dominé par les architectures ARM. Le constructeur vient de présenter sa gamme de processeurs Hondo accelerated processor unit (APU), spécialement conçue pour les tablettes Windows 8. L'APU Z-60 utilise la même architecture que le Z-01, premier processeur d'AMD pour les tablettes. Comme les puces Clover Trail d'Intel, le Z-60 est une solution dual-core qui dispose d'un processeur Hondo regroupant deux coeurs...

    Read the article

  • AMD-V is not enable in virtualbox in amd APU

    - by shantanu
    I am running Dual core AMD E450 APU. When i tried to run a 64-bit OS that requires hardware virtualization using virtual-box it showed me an error "AMD-V is not enable". My AMD processor should provide AMD-V support. And i can find no option for AMD-V in BIOS. How can i solve this problem? How could i enable AMD-V for my APU? Thanks in advance lscpu :- Architecture: x86_64 CPU op-mode(s): 32-bit, 64-bit Byte Order: Little Endian CPU(s): 2 On-line CPU(s) list: 0,1 Thread(s) per core: 1 Core(s) per socket: 2 Socket(s): 1 NUMA node(s): 1 Vendor ID: AuthenticAMD CPU family: 20 Model: 2 Stepping: 0 CPU MHz: 1650.000 BogoMIPS: 3291.72 Virtualization: AMD-V L1d cache: 32K L1i cache: 32K L2 cache: 512K NUMA node0 CPU(s): 0,1 EDITED:- Error of virtualBOX:- Failed to open a session for the virtual machine XXX. AMD-V is disabled in the BIOS. (VERR_SVM_DISABLED). Result Code: NS_ERROR_FAILURE (0x80004005) Component: Console Interface: IConsole {1968b7d3-e3bf-4ceb-99e0-cb7c913317bb}

    Read the article

  • Problems with Ubuntu and AMD A10-4655M APU

    - by Robert Hanks
    I have a new HP Sleekbook 6z with AMD A10-4655M APU. I tried installing Ubuntu with wubi--the first attempt ended up with a 'AMD unsupported hardware' watermark that I wasn't able to remove (the appeared when I tried to update the drivers as Ubuntu suggested) On the second attempted install Ubuntu installed (I stayed away from the suggested drivers) but the performance was extremely poor----as in Windows Vista poor. I am not sure what the solution is--if I need to wait until there is a kernel update with Ubuntu or if there are other solutions--I realise this is a new APU for the market. I would love to have Ubuntu 12.04 up and running--Windows 7 does very well with this new processor so Ubuntu should, well, be lightening speed. The trial on the Sleekbook with Ubuntu 12.10 Alpha 2 release was a complete failure. I created a bootable USB. By using either the 'Try Ubuntu' or 'Install Ubuntu' options resulted in the usual purple Ubuntu splash screen, followed by nothing...as in a black screen without any hint of life. Interestingly one can hear the Ubuntu intro sound. In case you are wondering, this same USB was trialed subsequently on another computer with and Intel Atom Processor. Worked flawlessly. Lastly the second trial on the Sleekbook resulted in the same results as the first paragraph. Perhaps 12.10 Beta will overcome this issue, or the finalised 12.10 release in October. I don't have the expertise to know what the cause of the behaviour is-the issue could be something else entirely. Sadly, the Windows 7 performance is very good with this processor-very similar and in some instances better to the 2nd generation Intel i5 based computer I use at my workplace. Whatever the cause is for the performance with Ubuntu 12.04 or 12.10 Alpha 2, the situation doesn't bode well for Ubuntu. Ubuntu aside, the HP Sleekbook is a good performer for the price. I am certain once the Ubuntu issue is worked on and solutions arise, the Ubuntu performance will probably be better than ever.

    Read the article

  • xorg-edgers PPA with llvmpipe breaks AMD APU system

    - by linux_RRT
    I've read before where this had happened to another user with the same system... I was running Ubuntu 12.04 LTS with Kernel 3.2.0.29 and decided to give xorg-edgers a try. I purged fglrx* and xorg* before beginning. I upgraded with sudo apt-get upgrade -d The system downloaded and installed 109MB worth of data to the system, including llvmpipe which I am very unfamiliar with, and Kernel 3.5.0.11. The system was then rebooted to finalize the upgrade. The system boots to a black screen and then tells me "The system is running in low-graphics mode". Did I miss a step in the install? Or do the newest open-source drivers just not work with my hardware? I realize this hardware (APU) is some of the newer development. I dropped to command via the fallback menu and attempted to boot lightdm as root, but the system hangs in 'Configuring kernel parameters' at Starting initializes zram swaping. ...and then it just sits there. The other thing that concerns me is the output at the top of the screen that says: could not write bytes: Broken pipe Does llvmpipe work for this type of system? To be clear the system is: MSI x370-206us Laptop Radeon HD 6320 AMD e450 APU 1.67ghz dual-core Any help would be much appreciated. Like I said, I'm pretty sure I followed the right order of operations for the install procedure, but I was curious if anyone with similar hardware had experienced anything similar.

    Read the article

  • Ubuntu slow on HP 2000 notebook with Apu e1-1200

    - by user169861
    I am using HP 2000 notebook which initially came with Windows 7 64bit. It has 4gb ram, AMD APU E1-1200 (1.4ghz) with Radeon 7310. With Windows it worked ok, so I decided to switch to Ubuntu. I installed 13.04 64bit at first, but responsiveness wasn't that good (opening windows, menus, Firefox, dash search) even if it was way better during the testing from live USB. I tried different kind of drivers for graphic card, 13.6beta, 13.4, fgrlx proprietary, upgraded kernel but the situation was the same. Then I tried installing 32bit version but the results were identical. After that I tried LTS version 12.04 and Xubuntu 13.04.. Responsiveness wasn't that different at all. Not sure what to do, and I wouldn't want to go back to Windows. This machine is not a beast, but it should be enough to deal with Unity or Xfce without troubles. Oh yes, I have insydeH20 BIOS with not so many options at my disposal. Thanks and best regards,

    Read the article

  • AMD E-450 APU with HD-6320 graphics produces jerky videos

    - by user80424
    I try to make videos smooth playing on a Lenovo E325 laptop equipped with AMD E-450 APU. This processor have Ati HD-6320 GPU integrated. I installed ATI proprietary driver (Catalyst 12.04) as described here. Everything went fine and got no errors. However I can not play smooth HD videos. Almost every second frame has been dropped in VLC with hardware acceleration enabled. vainfo shows: libva: VA-API version 0.32.0 Xlib: extension "XFree86-DRI" missing on display ":0". libva: va_getDriverName() returns 0 libva: Trying to open /usr/lib/x86_64-linux-gnu/dri/fglrx_drv_video.so libva: va_openDriver() returns 0 vainfo: VA-API version: 0.32 (libva 1.0.15) vainfo: Driver version: Splitted-Desktop Systems XvBA backend for VA-API - 0.7.8 vainfo: Supported profile and entrypoints VAProfileH264High : VAEntrypointVLD VAProfileVC1Advanced : VAEntrypointVLD fglrxinfo says: display: :0 screen: 0 OpenGL vendor string: Advanced Micro Devices, Inc. OpenGL renderer string: AMD Radeon HD 6320 Graphics OpenGL version string: 4.2.11631 Compatibility Profile Context and fgl_glxgears produces ~250fps. Why are HD video frames dropped? CPU doesn't goes above 50% during playback.

    Read the article

  • ESXi 5.5 on unlisted AMD A10 6800K possible?

    - by Erik
    I've done some initial googling.. and found AMD's A10 6800K supports virtualization via AMD-V. I'd like to install ESXI 5.5 on a USB thumbdrive to drive two+ VM's running Lubuntu. Has anyone seen the AMD A10 APU line used for baremetal hosting? AMD A10 APU 6800K 8GB DDR3 non ECC RAM 350GB HDD old spin drive (Sata I?III? unknown) I want to get started but afraid I'll wipe my current linux instance if it goes bad.

    Read the article

  • Playing NSF music in FMOD.net

    - by Tesserex
    So, as the title says, I want to be able to play NSF files using FMOD, because my project already uses FMOD and I'd rather not replace it. This will involve figuring out how existing players and emulators work and porting it. I haven't yet found an existing player that uses FMOD. My starting point is the MyNes source from http://sourceforge.net/projects/mynes/. There are two big steps between here and what I'm looking for. MyNes plays from a ROM, not NSF. So, I have to rip out the APU and get it to play NSF files. The MyNes APU uses SlimDX, so I have to convert that to FMOD.NET. I am really stuck about how to go about either of these, because I'm not that familiar with audio formats and it's hard finding resources online. So here are a few questions: From what I can tell from the NSF spec at http://kevtris.org/nes/nsfspec.txt, it's just contains the relevant memory section of the ROM, plus the header. If anyone can verify or correct this that would be great. The emulator APU uses data from the rest of the emulator to play, including things like cycle counts. I'm not sure what replaces this in a standalone player. Can't I just load all the music data at once into a stream and play it? Joining #1 and #2, does the header data from the NSF substitute for some of the ROM data in the emulator code? Using FMOD, will I be following the usercreatedsound example for loading a stream? And does this format count as PCM? Specifically MyNes says PCM8. Any tips on loading / playing the stream in FMOD are appreciated. As an aside, I don't really understand the loading / playing sections of the spec I linked at all. It seems to apply to 6502 systems / emulators only and not to my situation. I know it's a long shot for anyone here to have enough experience in this area to help, but anything you can provide is definitely appreciated. A link to an existing .NET library that does this would be even better, but I don't believe one exists.

    Read the article

  • Playing NSF music in FMOD.net

    - by Tesserex
    So, as the title says, I want to be able to play NSF files using FMOD, because my project already uses FMOD and I'd rather not replace it. This will involve figuring out how existing players and emulators work and porting it. I haven't yet found an existing player that uses FMOD. My starting point is the MyNes source from http://sourceforge.net/projects/mynes/. There are two big steps between here and what I'm looking for. MyNes plays from a ROM, not NSF. So, I have to rip out the APU and get it to play NSF files. The MyNes APU uses SlimDX, so I have to convert that to FMOD.NET. I am really stuck about how to go about either of these, because I'm not that familiar with audio formats and it's hard finding resources online. So here are a few questions: From what I can tell from the NSF spec at http://kevtris.org/nes/nsfspec.txt, it's just contains the relevant memory section of the ROM, plus the header. If anyone can verify or correct this that would be great. The emulator APU uses data from the rest of the emulator to play, including things like cycle counts. I'm not sure what replaces this in a standalone player. Can't I just load all the music data at once into a stream and play it? Joining #1 and #2, does the header data from the NSF substitute for some of the ROM data in the emulator code? Using FMOD, will I be following the usercreatedsound example for loading a stream? And does this format count as PCM? Specifically MyNes says PCM8. Any tips on loading / playing the stream in FMOD are appreciated. As an aside, I don't really understand the loading / playing sections of the spec I linked at all. It seems to apply to 6502 systems / emulators only and not to my situation. I know it's a long shot for anyone here to have enough experience in this area to help, but anything you can provide is definitely appreciated. A link to an existing .NET library that does this would be even better, but I don't believe one exists.

    Read the article

  • CakePHP Bake association problem

    - by Apu
    I have only two tables in my database with a one-to-many relationship between them (user hasMany messages) and am trying to get basic CRUD functionality going. Bake detects the associations correctly and specifies them correctly inside the model classes, but in controllers and views it looks like Cake doesn't know anything about those associations -- I don't even get a select tag for user_id when I go add a new message. Has anyone come across this problem before? What can I be doing wrong? Table structure appears to be fine: CREATE TABLE users ( id int(11) NOT NULL AUTO_INCREMENT, username varchar(255) NOT NULL, `password` varchar(255) NOT NULL, email varchar(255) NOT NULL, created datetime NOT NULL, modified datetime NOT NULL, PRIMARY KEY (id) ) ENGINE=MyISAM DEFAULT CHARSET=utf8; CREATE TABLE IF NOT EXISTS `messages` ( `id` int(11) NOT NULL AUTO_INCREMENT, `user_id` int(11) NOT NULL, `content` varchar(255) NOT NULL, `created` datetime NOT NULL, `modified` datetime NOT NULL, PRIMARY KEY (`id`) ) ENGINE=MyISAM DEFAULT CHARSET=utf8 AUTO_INCREMENT=1 ;

    Read the article

  • Purple Screen then Black Screen while Booting from CD or Windows Install

    - by Tyler
    Whenever I try to run Ubuntu from my internal CD drive, I see this screen minus the Ubuntu Text: Then the screen goes black, not even the internal light stays on. Sometimes it restarts itself, other times the black screen is indefinite until I restart the laptop myself. I'm on an HP Quad-Core AMD A8-3500M APU with 8 GB RAM and a Radeon AMD 6620g Discrete-Graphics Card. (HP dv6-6145dx) This is my first time using Linux, I am not too technically-inclined so any simplification would be welcomed. I am good at following technical instructions though which is how I was able to partition my hard drive and change the boot order to allow the internal CD drive first. Thanks in advance!

    Read the article

  • PlayOnLinux Unable to find 32bit opengl libraries Dual ATI Videocards

    - by Rodolfo Pires
    Im curently running Ubuntu 12.04 LTS 64Bit So, i installed league of legends fine the first time with the opensource ATI Drivers provided by ubuntu itself with no issues at all, but it runs so slow ... max 20fps because those drivers dont fully support my Dual Graphic cards Than i restored system and i installed the Linux Version of the Proper ATI Drivers from the AMD Website wich supports my APU AMD-A8-4500M with the AMD Radeon 7640G + 7670M Graphics Cards enabling me full performance from my system .. Problem is, to run League of Legends i need a 32bit opengl library, and the driver, automaticly detects a 64bits Linux install and loads the 64bit libraries but not the 32 ones . i need some kind of command, to force the 32bit libraries to load, or to make League of Legends run on the 64 ones .. Im kinda noob to ubuntu .. i installed the 32 bits ones trough terminal and still doesnt work idk why, maybe the driver doesnt want to load them .. plzz help me on this, i dont want to go back to windows just to play league since im noob idk what more details to post here so plz tell me what do you need

    Read the article

  • System crashes when internet connection is unplugged

    - by Rincewind
    When i first tried to install any ubuntu newer than 10.04 on my netbook (Acer aspire one 722 11,6" WXGA - C-60 Dual Core APU - AMD Radeon HD 6250 - 1x HDMI - 2GB DDR3 - 320GB - 802.11bgN - 6CELL2.2 - BT 3.0 - VGA Webcam), it would fail to boot. I found out that the only fix to this was linking it to the internet via lan-cable during the installation. However, after installing ubuntu 12.04 successfully my system is crashing everytime i unplug the lan-cable. My first thought was disabling the netbook´s w-lan (via the band at the top) but it was not fixing the problem. Looking on the taskmanager ('top') during the process brought no further insight, no process was exploding or something like that. As i am out of guesses help would be really appreaciated. Lg Rincewind

    Read the article

  • Monitor flickering ATI

    - by Atzu
    I'm using ubuntu 12.10 on laptop samsung with randeon hd 6620g (APU A8), when I run amdcccle -version it says 2.18, not sure if that's the correct version. My problem is that I have and external monitor, AOC e2343Fsk and when I finally got it working at the resolution I want 1920x1080 it works fine for like 5minutes and then it starts flickering... I solved this on Windows (the exact same problem) with some options (I don't remember very well) I believe there were some buttons '+' and '-' on some vsync option I played with them on windows and Yay! got it working, but I don't see anything similar on this catalyst version (I used xorg-edgers ppa for installing fglrx). Thanks.

    Read the article

  • Problem: Black screen after resume

    - by Robert
    Problem: Black screen after resume I found the below statement that I provided the link for but, no instructions with it for a person that's new to Ubuntu on what exactly to do to fix the problem. Can someone clarify this for me? Thank you. Ubunu 13.10 AMD A6-3420M APU with Radeon(tm) HD Graphics × 4 64bit Toshiba L775 My computer boots to a black screen, what options do I have to fix it? Typical scenario is "use a laptop docked with lid closed, only the external screen is active, suspend, take the laptop, open it somewhere"... which leads to "no screen active". To debug this problem, check if gnome-settings-daemons is getting a signal that the display configuration has changed, by running xtrace against it, and look for a RRScreenChangeNotify event when resuming the machine. If that signal is being sent, then it indicates a possible bug in g-s-d. Otherwise, it suggests a bug in either X or (more likely) the kernel which is not causing the signal to be emitted to begin with.

    Read the article

  • Ubuntu 12.04 UEFI Partition Boot Fail

    - by John
    I've built a new system, and I want to take full advantage of UEFI and Ubuntu. So I install Ubuntu, and try to boot from it, and my BIOS (Asus EZ Mode / Advanced Mode) simply says "No bootable medium found. Insert Bootable Medium and press any key to try again." So I've reinstalled several times, without any failures, Ubuntu IS installed, and I've tried Ubuntu Boot Repair (link below) and nothing I do seems to work. My Build: Asus f1a75m pro AMD A8 APU Samsung 1TB HDD 8GB G-Skill Ripjaws X (1866) Partitions and Ubuntu Boot Repair here

    Read the article

  • How to load kernel from live cd on UEFI install of Ubuntu 12.10?

    - by Geezanansa
    Running a GYGABYTE FM1 motherboard which is using a AMD 3870k APU with a new WS Caviar 1TB HDD. Following the advice in the Motherboard manual and https://help.ubuntu.com/community/UEFI have now got to grub screen for UEFI install. The dvd.iso being used is Ubuntu 12.10 desktop amd64. The hdd has had a gpt partition table made for, by using gparted when in a live desktop session(booted in bios mode)but decided to leave it unformatted with the intention of using installer to set up partitions. Booting live dvd gives grub list with the option to "install ubuntu" but get "can not read cd/0" and "the kernel must be loaded first" errors; when that option is selected. Any pointers on how to get installer going for UEFI install would be good. Thanks in advance.

    Read the article

  • Ubuntu 12.04 ATI 6450

    - by user210717
    Right now my video card isn't responding after the Ubuntu Logo is shown, (I see a black screen and that's it) I have installed ubuntu 12.04 AMD64 and if I remove the video card and use the VGA from the MOBO then I can use it with no problems, other data: 4 GB of ram 1333 500 GB WD AMD APU A6 3500 2,1 GHZ I forgot a couple of details, everything was working great until last night, when the light went off (I don't know if I'm explaining myself I'm from Argentina and english isn't my first language there was a power cut I meant) and then when it got back I used my pc until I went to bed (after upgrading) and this morning, when I woke up I had this problem for breakfast, I've been reading a little and I had a similar problem before and fixed it, but it was a system problem, a missing package or something, I don't remember, but here the only issue is that the video card doesn't give me image after the ubuntu logo.

    Read the article

  • Missing graphics accelerator for Toshiba C855D-s5232

    - by user2387429
    I formatted the drive and re-installed Windows 7 64-bit on a Toshiba Satellite C855D-S5232. Now I am missing the graphics accelerator. I have been to Toshiba's website but cannot find the right one. Same is so for AMD. It has AMD E1-1200 APU with Radeon HD Graphics. The machine is recognizing a standard VGA. I ordered a recovery disk on eBay and it was supposed to be here yesterday. Can anyone help with other options?

    Read the article

  • XenServer 6.2 crashes everytime I try to install a new Windows 7 x64 vm

    - by Erik
    I'm running XenServer 6.2 with all patches and updates on two boxes. One box is an intel core i7 2600K.. works great. My latest box is an AMD A10 APU.. and everytime I try to install Windows 7 OS as a guest.. I get to the screen where Windows files start to expand, and suddenly the entire box freezes up. Is there a log I can check, and or a way to migrate a working Windows 7 image I created on Box 1 over to Box 2?

    Read the article

  • Ad Server does not serve ads in Firefox, but works fine in Chrome, IE, & Safari!?

    - by HipHop-opatamus
    I'm having a strange (likely JavaScript) related issue. I'm running Open X Ad Server ( http://www.openx.org ) which serves ads to the website http://upsidedowndogs.com . The ads load fine every time when visiting the site via Chrome, IE, or Safari, but sometimes don't load at all in FireFox - Hence, it is a client side issue, which leads me to believe its something up with the javascript. The fact that the problem is intermittent, and does not through any error codes to FireBug, also doesn't make it any easier to diagnose and address. Any ideas how to diagnose / address this issue? Thanks! Here is the code generated by OpenX (it goes in the page header - additional code is then used in each ad unit, as seen on the page) if (typeof(OA_zones) != 'undefined') { var OA_zoneids = ''; for (var zonename in OA_zones) OA_zoneids += escape(zonename+'=' + OA_zones[zonename] + "|"); OA_zoneids += '&amp;nz=1'; } else { var OA_zoneids = escape('1|2|3|4'); } if (typeof(OA_source) == 'undefined') { OA_source = ''; } var OA_p=location.protocol=='https:'?'https://ads.offleashmedia.com/server/www/delivery/spc.php':'http://ads.offleashmedia.com/server/www/delivery/spc.php'; var OA_r=Math.floor(Math.random()*99999999); OA_output = new Array(); var OA_spc="<"+"script type='text/javascript' "; OA_spc+="src='"+OA_p+"?zones="+OA_zoneids; OA_spc+="&amp;source="+escape(OA_source)+"&amp;r="+OA_r; OA_spc+=(document.charset ? '&amp;charset='+document.charset : (document.characterSet ? '&amp;charset='+document.characterSet : '')); if (window.location) OA_spc+="&amp;loc="+escape(window.location); if (document.referrer) OA_spc+="&amp;referer="+escape(document.referrer); OA_spc+="'><"+"/script>"; document.write(OA_spc); function OA_show(name) { if (typeof(OA_output[name]) == 'undefined') { return; } else { document.write(OA_output[name]); } } function OA_showpop(name) { zones = window.OA_zones ? window.OA_zones : false; var zoneid = name; if (typeof(window.OA_zones) != 'undefined') { if (typeof(zones[name]) == 'undefined') { return; } zoneid = zones[name]; } OA_p=location.protocol=='https:'?'https://ads.offleashmedia.com/server/www/delivery/apu.php':'http://ads.offleashmedia.com/server/www/delivery/apu.php'; var OA_pop="<"+"script type='text/javascript' "; OA_pop+="src='"+OA_p+"?zoneid="+zoneid; OA_pop+="&amp;source="+escape(OA_source)+"&amp;r="+OA_r; if (window.location) OA_pop+="&amp;loc="+escape(window.location); if (document.referrer) OA_pop+="&amp;referer="+escape(document.referrer); OA_pop+="'><"+"/script>"; document.write(OA_pop); } var OA_fo = ''; OA_fo += "<"+"script type=\'text/javascript\' src=\'http://ads.offleashmedia.com/server/www/delivery/fl.js\'><"+"/script>\n"; document.write(OA_fo);

    Read the article

  • 912 stream processor available in OpenCL

    - by tugrul büyükisik
    I am thinking of assembling this system: AMD CPU (A8-3870 APU which has Radeon HD 6550D inside: 400 stream processors:xxx GFLOPS) nearly 110$ AMD Graphics card: HD 7750 (512 stream processors:819 GFLOPS peak performance) nearly 170$ Appropriate ram (1600MHz bus) Mainboard What GFLOPS level can I reach as a stable mode with using OpenCL and similar programs? Can I use all 912 stream processors at the same time? I am not trying to do a VS question. I need to know what could be better for scientific computing (%75 of the time) and gaming (%25 of the time) because I have a low budget. With "scientific calculations" I mean fluid dynamics/solid state physics simulating; with games I mean those that need openCL and PhysX.

    Read the article

  • UEFI - Linux Mint Boot from USB Doesn't work

    - by Joe Bennett
    I'm running Linux Mint (only OS other than in VirtualBox) and wanting to remove it. I've created a Live USB of Windows 8 using Windows 7 USB/DVD Download Tool - Yes, I know it says Windows 7 but I've been doing research and I am hearing from everywhere that it also works for Windows 8. The ISO was loaded on just fine (AFAIK) Computer came with Windows 8 pre-installed I have Safe boot and Fast boot disabled in the BIOS Settings I have USB as my first boot option I have tried both the USB 2.0 and 3.0 ports Yet, Mint is all that will boot up. Anybody have a similar issue? If it helps, the computer is a Toshiba Satellite S855D Laptop with an AMD APU quad-core processor (3 CPU, 1 GPU)

    Read the article

  • HDMI Audio drops out when display enters powersave

    - by Jared Tritsch
    I have a Windows 8 machine with an AMD APU attached to my Home Theater system through HDMI (HDMI routes through a Home Theater AMP, then into the TV). Here's my problem, Whenever the display is interrupted, usually by the TV being turned off or into powersave mode, the audio device lists as "Disconnected" in windows audio devices and I cant get it to re-recognize that the HDMI audio is, in fact, plugged in. The only solution I have found so far is to restart the machine, which will then recognize the device without any problems, until the next time the TV turns off and the problem once again resurfaces. Has anyone else seen this phenomenon? I have no idea if its the GPU, the HDMI interface, the AMP, or even the TV itself, as there really isn't much a way to tell...

    Read the article

  • Custom PC won't boot Windows 7 dvd but does with windows vista

    - by M_rk
    I ordered a custom build PC. (It was assembled by the store). This is the setup Motherboard: Asrock A75 PRO4-M DVD drive: LG GH24NS90 SSD: Samsung 830 series 128GB DDR3 SDRAM: 2× Corsair XMS3 CMX4GX3M1A1600C9 (2× 4GB) APU (CPU+GPU): AMD A8-3850 Boxed I got a installation DVD for Windows 7 Professional x64 English (including SP1), but it doesn't work. I got a new one from the store and it doesn't work either. However they work on a other PC. So the DVDs aren't bad. I tried an old installation DVD for Windows Vista. Both 32 bit and 64 bit work. So the boot order and such are right and working on the new PC. Is there something I'm missing here? Any ideas on how to make it work?

    Read the article

1 2  | Next Page >