Search Results

Search found 84 results on 4 pages for 'asrock'.

Page 1/4 | 1 2 3 4  | Next Page >

• BIOS update for Asrock H67M-GE/THW

  - by Eugene Beresovksy

  I can't seem to find a flash image for my mainboard. There is not even a product page for it (any more, although there used to be a manual at http://download.asrock.com/manual/qig/H67M-GETHW.pdf, as google revealed). So no driver updates from the manufacturer for my mainboard either. I offered the flash images for both of the similarly named H67M-GE and H67M-GE/HT to asrock's "Instant Flash" utility, but it complained it "could not find an image" on my usb drive. The asrock page states that "Instant Flash" searches for a flash image that exactly matches the mainboard, i.e. it must have determined that the H67M-GE/THW I have is different from H67M-GE and H67M-GE/HT. Any idea?

  Read the article

• Sound Channel map incorrect on an ION 330 ASRock

  - by math

  I have a ION 330 ASRock just updated on Precise and the sound channel mapping is incorrect. Channel map is set as follow: Front Left = Front left Center = Rear Left Front Right = Font Right Rear Right = LFE Rear Left = Center LFE = Rear Right I am testing the sound channel using speaker-test -c 2 -t wav Can some one tell me how I can remap easily? I have tried several possible changes to /etc/pulse/defaut.pa unsuccessfully.

  Read the article

• Installing Heatsink (XIGMATEK Gaia SD1283) onto Motherboard (ASRock X79 Extreme9 LGA 2011 Intel X79)

  - by Mike Hagstrom

  I recently have purchased: XIGMATEK Gaia SD1283, in the instructions it states two different type's for the installation of the Intel LGA 2011. It lists Type 1 and Type 2. Now I have the Intel Core i7-3930K (http://www.newegg.com/Product/Product.aspx?Item=N82E16819116492) and I have the ASRock X79 Extreme9 LGA 2011 Intel X79 (http://www.newegg.com/Product/Product.aspx?Item=N82E16813157285) What Type do I use for the installation of this heatsink?

  Read the article

• What parts should I get for an ASRock x58 Extreme motherboard

  - by Brad Gilbert

  I just received an ASRock x58 Extreme motherboard, for my post on this question. It was a 2009 Tom's Hardware recommended buy. It is a Core i7 motherboard, with an X58 Express Chipset. It uses DDR3 RAM. What I want to know is, what parts should I get to finish it off. I'm looking for some good bargains, because of a lack of funds. The most taxing game I will probably play on it is OpenTTD. The only parts I currently have that are compatible: A Dynex 400W power supply. It appears to be an ATX 2.1 power supply, with the addition of a -5 rail. Apparently designed to be compatible with most ATX-style motherboards. Several PCI add-in cards. Mostly 10/100 Network cards Some sound cards Some video cards with a VGA connector Plenty of PATA drives. 8 GB - 80 GB Hard-drives A dozen or-so CD-ROM drives, only a handful of them are CD-RW drives. One DVD-ROM drive I have one LCD, with a 15 pin VGA connector, which I salvaged from the dump. The only thing wrong with it was some dead capacitors. It also has a stuck pixel.

  Read the article

• Can't boot from SATA dvd, seen as SerialCH1_Master

  - by dierre

  Here's the problem: I have an old computer based on an AsRock motherbord, the p4vt8+. I have 2 IDE HDs , one per each channel (IDE0 and IDE1) and I have a SATA dvd LG GH22N550. When I go into the BIOS panel on the boot devices list I can see IDE0 and IDE1 but not the dvd that I need to install Windows. When the computer is booting I can see it under the voice SerialCH1_Master. I know I'm doing something wrong but I can't figure out what it is.

  Read the article

• Chassis fans and power LEDs still work in Hibernate

  - by Jaded

  I have ASRock Z68 Extreme3 Gen3 motherboard recently updated to 2.20 BIOS version. OS is Windows 7 x64. The problem is after that update full hibernation (by that i mean full system power off) stopped working although everything was fine before. Now when I press hibernate, sleep in initiated as usual, monitor goes to sleep, HDD and CPU fan stop spinning, but chassis fans (i have Gigabyte Aurora 3D 570 case with two rear and one front fans) still remain working. Also power leds are lit as if computer is turned on. Tried changing different UEFI settings related to sleep mode, and none of them change above described behaviour. I have "Deep Sleep" (Advanced-South Bridge Configuration) set to "Enabled in S4-S5", "Suspend to RAM" (Advanced-ACPI Configuration) set to "Auto", all fans settings in "H/W Monitor" set to "Auto".

  Read the article

• Can you tell whether I have a hardware or software problem with a DVD-ROM drive?

  - by user8934

  Trying to copy the content of a DVD on a Asrock ION 330 running Maverick, i.e. with: dd if=/dev/sr0 of=dvdcopy ...I get errors in /var/log/messages: Jan 15 17:18:15 asrock kernel: [ 2616.445966] sr 1:0:0:0: [sr0] Unhandled sense code Jan 15 17:18:15 asrock kernel: [ 2616.445975] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE Jan 15 17:18:15 asrock kernel: [ 2616.445984] sr 1:0:0:0: [sr0] Sense Key : Medium Error [current] Jan 15 17:18:15 asrock kernel: [ 2616.445994] sr 1:0:0:0: [sr0] Add. Sense: Id CRC or ECC error Jan 15 17:18:15 asrock kernel: [ 2616.446004] sr 1:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 02 00 00 02 00 I'd tell it is a hardware problem, but it happens with various DVDs and on a second PC, also running Maverick... Both the PCs previously ran Lucid, same problems.

  Read the article

• what's POST code 18 / can I run an ASRock P55 Pro + Core i3 530?

  - by Michael Borgwardt

  When I switch my newly built PC on, the fans start up, but I get nothing on the monitor, and the POST display on the motherboard runs quickly through various codes and then stops at code 18, which does not appear in the manual (the list there seems identical to this one). This lasts about 10 seconds, after which the machine shuts down. After a pause (also about 10 seconds) it starts up again, and this repeats until I cut the power. Interestingly, when I push the reset button, it stops at POST code 16 (which is also not listed in the manual). Does anyone have information about the meaning of those codes? Motherboard: ASRock P55 Pro CPU: Intel Core i3 530 Graphics Card: Sapphire HHD 5750 Does anyone have experience with that Motherboard/CPU combination? It says on the packaging and in the manual that it's only compatible with Core i5 and i7 (no mention of i3), but on the maker's product page, the i3 is listed as compatible as well.

  Read the article

• Enabling Surround sound on a Realtek ALC892 via SPDIF, on Windows 7

  - by Alex

  I have a problem with my ALC892, on an ASRock mainboard (ASRock 890FX Deluxe4). I get only stereo sounds if I use SPDIF connection, in general. My amp shows that is getting surround sound only when I use the Test feature of Windows 7. This test feature allows to know which formats are supported by the audio chip. The tests render correctly both Dolby Digital and DTS. You can find this test under Sounds, Playback Devices, Select Digital Audio, then "Properties". I am using Windows 7 x64, with the latest drivers from the official Realtek website. I also tested other driver versions, both from the Realtek website and from the ASRock one, but had no luck. Thanks for the help. Some specs: CPU: AMD Phenom II X4 965 MOBO: ASRock 890FX Deluxe4 (with onboard Realtek ALC892) Audio amp: Onkyo R-380 (works fine with other sources like PS3 and Xbox 360)

  Read the article

• Ubuntu hangs at the '_' prompt for 15' when booting. Do I need another driver for my Intel G31/G33 integrated graphics?

  - by Doctoa

  I have an ASROCK which uses Intel G31 graphics. Ubuntu says my graphics chipset is G33. Should I look for another driver or are they from the same family? I am also having problems booting and that purple screen stuck so for this I asked this question. I have partially fixed the purple screen stuck by enabling (uncommenting) this line in grub: GRUB_TERMINAL=console But Ubuntu still hangs at start up for about 15 minutes with a black screen and only the '_' prompt. Here is a link for an overview of my ASROCK G31M-S

  Read the article

• Will BIOS boot mode Ubuntu install be able to boot when firmware "Fast Boot" is "Ultra Fast"?

  - by Pro Backup

  I have an AsRock mainboard with UEFI BIOS P1.50 02/14/2014. The firmware "Fast Boot" option is set to "Fast", Boot Option #1 is set to "AHCI P4: OCZ-VERT...": this is BIOS not UEFI boot. This boot disk has an MBR partitioning scheme (# parted -l | grep Partition\ Table:). Therefore Ubuntu 14.04 is installed in BIOS/CMS (Grub-PC) mode. The Ubuntu boot process ends in a text console (no GUI). There is no external graphics card in use. The stock Ubuntu kernel is replaced with Ubuntu supplied mainline 3.16.0-031600rc6-generic. dmesg outputs lines containing BIOS, like: SMBIOS 2.7 present Calgary: detecting Calgary via BIOS EBDA area Calgary: Unable to locate Rio Grande table in EBDA - bailing! [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored BIOS EDD facility v0.16 2004-Jun-25, 0 devices found The ASRock BIOS it selves display this help text for "Ultra Fast - Fast Boot": Ultra Fast mode is only supported by Windows 8 and the VBIOS must support UEFI GOP if you are using an external graphics card. Please notice that Ultra Fast mode will boot so fast that the only way to enter this UEFI Setup Utility is to Clear CMOS or run the Restart to UEFI utility in Windows. Assumptions: I suspect after changing UEFI setting "Fast Boot" to "Ultra Fast" that the machine will no longer boot into Ubuntu's console. I expect when first exchanging "Grub-pc" with "Grub-efi", that the machine will still be able to boot to a grub menu (thus allowing to change the "Fast Boot" setting back to "Fast" without clearing CMOS). Are these two "Fast Boot" assumptions correct, and/or, may I expect Ubuntu 14.04 running mainline kernel 3.16rc6 and Grub-efi to still boot to console after enabling UEFI Ultra Fast Boot?

  Read the article

• Weird system freeze. Nothing works keyboard/mouse/reset button - Ubuntu 12.04 64bits [closed]

  - by Simon

  I have fresh PC: i5 3570K with Intel 4000 onboard ASrock Z77 Extreme4-m 8GG RAM - Adata 1333Mhz... 1TB Seagate drive 7200rpm I've also fresh systems - Ubuntu/Win7 and today there was something strange. Ubuntu twice just freezed. Everything stopped, even keyboard and mouse wasn't responding. Even RESET button didn't work. Right now memtest is running, but I'd like to know, where else can i look for cause. Can it be software fault if even reset isn't working? Only long reset pressing rebooted PC... I'm a bit confused. Or should I test components - CPU, motherboard, disk. Which logs in Ubuntu should I check to diagnose cause? EHm I had few adventures with this PC already. Shipped motherboard was broken (ASrock Z68 Extreme3) and had old bios, so I had to contact with reseller, replace it and at the end decided on Z77, but everything took 3 weeks, so I have bad feelings... Edit: Both freezes were during editing something in gedit (it can be coincidence) and after few updates today - when memtest is end I'll check what was updated

  Read the article

• CMUS Error: opening audio device: No such device

  - by clamp

  I cant seem to play any audio with CMUS because it always gives the above error the output of lspci -v | grep -A7 -i "audio" gives 00:1b.0 Audio device: Intel Corporation NM10/ICH7 Family High Definition Audio Controller (rev 02) Subsystem: ASRock Incorporation Device c892 Flags: bus master, fast devsel, latency 0, IRQ 49 Memory at dff00000 (64-bit, non-prefetchable) [size=16K] Capabilities: Kernel driver in use: snd_hda_intel 00:1c.0 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 1 (rev 02) (prog-if 00 [Normal decode]) what could be the problem?

  Read the article

• Run the system configuration once the system has been installed

  - by dierre

  Hi guys, the problem is the following. I have an old computer that mounts a SATA Dvd Burner. The old MoBo (an AsRock P4VT8+) is not able to recognize the freaking burner when booting. So I had to convert my IDE HD to USB HD and mount it on my laptop and install Ubuntu from there. The problem now is that I'm obviously getting kernel panic every now and then so I was wondering if it is possibile to rerun only the system and the hardware configuration.

  Read the article

• Black screen on login page

  - by Sulliwane

  When I startup my Ubuntu 12.04 installed on a Z77 Pro4 (ASrock motherboard), crucial M4 SSD drive (sata 3), and intel i5 3570k (ivy bridge), I get this black login screen : I also hear the ubuntu login sound "tic toc" but the screen is black, and if I type in some text, only strange characters appears (as you can see on the picture). Do you have any idea ? Thanks. ps : this is an evolution of a previous problem exposed here

  Read the article

• Fallback Mode on Intel HD 4000 on Ubuntu 12.04.1?

  - by caragh

  Just built a system w/ a ivy bridge CPU (Xeon E3-1245 v2) with Intel HD 4000 onboard graphics, board is an Asrock H77 ProM. I had loaded Ubuntu server 12.04.1 onto it, but wanted to fool around w/ gnome 3. I installed gnome-shell, which didn't work, then gnome, which did, but only loads on fallback mode - the video is recognized as "VESA: sandy/ivy bridge graphics" I tried installing the whole ubuntu-desktop shebang but it's still in fallback graphics. Any way to get the full eye candy?

  Read the article

• "No root file system is defined"

  - by user169670

  Have recently installed Ubuntu 12.04.2 LTS by USB on my newly built custom pc and I have run into a problem during installation with the error saying "No root file system is defined." My pc speculations: AMD Phenom x4 955 Black Edition ASRock 960GM/U3S3 FX Micro ATX AM3+ Motherboard Mushkin Redline 8GB (2x4GB) DDR3-1866 Memory Seagate Barracuda 1.5TB 3.5" 7200RPM Internal Hard Drive XFX Radeon HD 7850 1GB Video Card XFX 550W 80 PLUS Bronze Certified ATX12V / EPS12V Power Supply Everything is new.

  Read the article

• Ubuntu take hours to start!

  - by y2b4u3d

  I have installed Ubuntu 11.10 as my only OS after I formatted Windows XP but after the installation finished it took four hours to boot and start working it just was stuck in that purple screen with nothing on it!!! But if I unplug the power and start my PC again it start after bring me the grub option... What should I do to make em start just as easy as any OS do! my RAM is 1 GB, 80GB HDD, ASROCK.

  Read the article

• Slow network file transfer (under 20KB/s) on newly built x64 Win7

  - by Mangoshake

  I am getting <20KB/s for local network file transfer. If I transfer a very small file (less than 100KB) it would start quickly then slow down to <20KB/s. all subsequently network file transfer would be slow, a reboot is needed to reset this. If I transfer a large file it would be stuck on calculating for a long time and then begin with <20KB/s immediately. This is a newly built desktop running Windows 7 x64 SP1. Realtek gigabit LAN from the motherboard (ASRock Extreme3 gen3). Problematic speed is observed on the private LAN, both through ethernet and WiFi. The Router is D-Link DIR-655. Remote Differential Compression is off. Drivers are up-to-date from ASRock's website. I have tested network file transfer to and from another Windows 7 laptop and a MacBook Pro, so I am fairly certain it is the desktop's problem. The slow speed only happens with one direction also, outbound from the desktop, regardless of whether I initiate the file transfer action from the origin or the destination. Inbound network file transfer and internet speeds are fine, so I don't think this is a hardware issue. I am getting 74.8MB/s internet upload speed from speedtest.net (http://www.speedtest.net/result/1852752479.png). Inbound network file transfer I can get around 10-15MB/s. I am hoping this community has some insight for me to troubleshoot this. I don't see anything obviously related from the Event Viewer, and beyond that I just don't know where else to look. Any suggestions are greatly appreciated, thank you in advance.

  Read the article

• n68 s-ucc front panel audio

  - by user264522

  I have a motherboard asrock n68 s-ucc, and i need a hand identifying which pins on the board to connect my front audio header connectors to. On the connectors I have: double connector: GND and MIC IN double connector: LINE OUT FL and LINE OUT RL double connector: LINE OUT FR and LINE OUT RR simple connector: MIC POWER On the motherboard I have: GND PRESENCE# MIC_RET OUT_RET MIC2_L MIC2_R OUT2_R J_SENSE OUT2_L manual of motherboard and my front panel Thanks so much to all

  Read the article

• How can i set up email alerts for disk failures on a windows server 2012 box?

  - by Leo

  I have a windows 2012 server with 3 storage spaces set up, each containing a mirrored pair of 2TB drives. What is the best way to set up alerting so that i receive an alert when a physical disk fails? Ideally i would like these alerts to be sent via email to a pre-defined address. The current server set up is as follows: Intel Core i7 2600k 3.4GHz Socket 1155 8MB Cache Asrock H77 PRO4/MVP Socket 1155 VGA DVI HDMI 7.1 Channel Audio ATX Motherboard 16GB RAM 1 x 60GB SSD (OS) 6 x 2TB SATA III 7200 HDD (DATA)

  Read the article

• looking for the best power supply-- building computer--- [closed]

  - by fello

  What would be an appropriate power supply and form factor for those specifications below? CPU -Intel Core i7-950 Bloomfield 3.06GH Motherboard -- ASRock X58 Extreme 3 LGA ATX Hard drive-- Seagate Barracuda 7200.11 ST31500341AS 1.5TB 7200 RPM SATA 3.0Gb/s 3.5" Memory-- Kingston HyperX 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Processor---Intel Core i7-950 Bloomfield 3.06GHz LGA 1366 130W Quad-Core

  Read the article

• What are the possible causes of a not-booting motherboard with drdebug 00 code?

  - by Dutow

  I have pursached a new Asrock Z68 Extreme4 motherboard with an i7 2600K and 2x4GB ADATA DDR3. My problem is that it doesn't boot or beep, and the onboard drdebug led constantly displays "00" - which is according to the board's manual, "not used". The power cables are probably conntecting, because if I disconnect the 4+4 or 20+4 cable, nothing is displayed on the leds. Has anybody seen this error? What are the possible causes?

  Read the article

• random lags in music when playing on any music player

  - by harsh

  guys I have experienced this issue in most of all the music players i tried in ubuntu 12.10. When ever I play a track I experience certain issue, like the track just skipped a second or two. This happens occasionally but at least 4-5 times when ever i play any music track. The actual thing is that the track fast forwards by just 1 or 2 secs and then runs on normal rate. This used to happen during a video, but now it doesn't. But for the music this issue has not stopped. ASRock mootherboard,core2 duo. Also I get ubuntu 12.10 has experienced an internal error(its regarding nautilus). Also the Software Update always gives an internet connection connection error whereas I am able to browse the web and download with ease. Please reply..

  Read the article

• How to convert an XFS file system to HFS+

  - by user219350

  I have repeatedly convinced of the reliability of the XFS file system , and I was more than satisfied . I was happy with everything in Ubuntu 14.04 ( great software) , but there is a little "but ! " Basically, I work on OSX-Mavericks 10.9.3, which sees very Windows 8.1 and works wonders with NTFS, but does not see Ubuntu! Briefly describe the equipment: ASRock B75 Pro3-M i5 3330 GeForce GTX 650 Ti SATA 500GB running OS X Mavericks + Clover - a boot disk Toshiba 2TB running Windows 8.1 (x64) and Ubuntu 14.04 (amd64) If you boot from the Toshiba (where there is Ubuntu and boot Windows + GRUB) after restart boot from Clover, it is impossible. Tried a lot of options - as Clover installation and boot priority, and various settings for GRUB, but have not found an acceptable option and have no desire to reinstall again Clover (Mavericks reboots 20 seconds - excellent!) So please help on the file system - how to convert from XFS to HFS+ journaled. Mavericks to saw it all synced on Mac. Thank you for the sensible answer and help! Originally in Russian.

  Read the article

1 2 3 4  | Next Page >