Search Results

Search found 1565 results on 63 pages for 'ati mobility radeon'.

Page 1/63 | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

• Attach radeon driver to specific PCI devices?

  - by genpfault

  I have two Radeon cards in this machine, a 6570 and a 6950: lspci | grep VGA: 01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Turks [Radeon HD 6570] 02:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Cayman PRO [Radeon HD 6950] I'm trying to get VGA passthrough to work with KVM on Debian Wheezy, passing through the 6950 as a secondary video card to a Windows 7 guest. This works fine if I blacklist the radeon kernel module via /etc/modprobe.d/. If I remove the blacklist to run X11 (or even just a KMS console) on the 6570 the radeon module seems to attach to both cards: dmesg | egrep "01:00.0|02:00.0|radeon": pci 0000:01:00.0: [1002:6759] type 0 class 0x000300 pci 0000:01:00.0: reg 10: [mem 0xe0000000-0xefffffff 64bit pref] pci 0000:01:00.0: reg 18: [mem 0xf7e20000-0xf7e3ffff 64bit] pci 0000:01:00.0: reg 20: [io 0xe000-0xe0ff] pci 0000:01:00.0: reg 30: [mem 0xf7e00000-0xf7e1ffff pref] pci 0000:01:00.0: supports D1 D2 pci 0000:02:00.0: [1002:6719] type 0 class 0x000300 pci 0000:02:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref] pci 0000:02:00.0: reg 18: [mem 0xf7d20000-0xf7d3ffff 64bit] pci 0000:02:00.0: reg 20: [io 0xd000-0xd0ff] pci 0000:02:00.0: reg 30: [mem 0xf7d00000-0xf7d1ffff pref] pci 0000:02:00.0: supports D1 D2 vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=none,locks=none vgaarb: bridge control possible 0000:02:00.0 vgaarb: bridge control possible 0000:01:00.0 pci 0000:01:00.0: Boot video device [drm] radeon kernel modesetting enabled. radeon 0000:01:00.0: setting latency timer to 64 radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used) radeon 0000:01:00.0: GTT: 512M 0x0000000040000000 - 0x000000005FFFFFFF [drm] radeon: 1024M of VRAM memory ready [drm] radeon: 512M of GTT memory ready. radeon 0000:01:00.0: irq 46 for MSI/MSI-X radeon 0000:01:00.0: radeon: using MSI. [drm] radeon: irq initialized. radeon 0000:01:00.0: WB enabled [drm] radeon: ib pool ready. [drm] radeon: power management initialized fbcon: radeondrmfb (fb0) is primary device fb0: radeondrmfb frame buffer device [drm] Initialized radeon 2.12.0 20080528 for 0000:01:00.0 on minor 0 radeon 0000:02:00.0: enabling device (0000 -> 0003) radeon 0000:02:00.0: setting latency timer to 64 radeon 0000:02:00.0: VRAM: 2048M 0x0000000000000000 - 0x000000007FFFFFFF (2048M used) radeon 0000:02:00.0: GTT: 512M 0x0000000080000000 - 0x000000009FFFFFFF [drm] radeon: 2048M of VRAM memory ready [drm] radeon: 512M of GTT memory ready. radeon 0000:02:00.0: irq 49 for MSI/MSI-X radeon 0000:02:00.0: radeon: using MSI. [drm] radeon: irq initialized. radeon 0000:02:00.0: WB enabled [drm] radeon: ib pool ready. [drm] radeon: power management initialized fb1: radeondrmfb frame buffer device [drm] Initialized radeon 2.12.0 20080528 for 0000:02:00.0 on minor 1 [drm] radeon: finishing device. radeon 0000:02:00.0: ffff88041a941800 unpin not necessary [drm] radeon: ttm finalized pci-stub 0000:02:00.0: claimed by stub pci-stub 0000:02:00.0: irq 49 for MSI/MSI-X This causes the Win7 VM to bluescreen on boot. How can I configure things so that the radeon module only attaches to the 6570 and not the 6950?

  Read the article

• Ubuntu 11.10 and Mobility radeon HD 4570, 512MB can't find working drivers

  - by Slavak

  i'm pretty new to Linux and my new problem is ATI drivers. When i installed Ubuntu then i had black screen issue with the blinking in left upper corner, fixed it with F6 and set the "nolapic" mode, can boot only with "nolapic". Now the problem is the drivers. The suggested drivers, from the "Additional drivers" are not working. Always freeze at the login screen, the divers are: ATI/AMD proprietary FGLRX graphics driver Tried this method: http://drivers.downloadatoz.com/tutorial/28786,how-to-fix-amd-catalyst-11-10-not-working-on-ubuntu-11-10-issues.html? but this method break it down really hard, not ever that helped anymore: sudo /usr/share/ati/fglrx-uninstall.sh # (if it exists); sudo apt-get remove --purge fglrx*; sudo apt-get remove --purge xserver-xorg-video-ati xserver-xorg-video-radeon ; sudo apt-get install xserver-xorg-video-ati; sudo apt-get install --reinstall libgl1-mesa-glx libgl1-mesa-dri xserver-xorg-core; sudo dpkg-reconfigure xserver-xorg Now i'm here with a fresh install and i cant find anything that works, can someone help me please! I like Ubuntu, but i need to get rid of the lagg, or its Windows 7 only for me then :( Thanks for reading!

  Read the article

• Installing Catalyst 11.6 for an ATI HD 6970

  - by David Oliver

  Ubuntu Maverick 10.10 is displaying the desktop okay (though limited to 1600x1200) after my having installed my new HD 6970 card, so I'm now trying to install the proprietary driver (I understand the open source one requires a more recent kernel than that in Maverick). The proprietary driver under 'Additional Drivers' resulted in a black screen on boot, so I deactivated and am trying to follow the manual install instructions at the cchtml Ubuntu Maverick Installation Guide. When I try to create the .deb packages with: sh ati-driver-installer-11-6-x86.x86_64.run --buildpkg Ubuntu/maverick I get: david@skipper:~/catalyst11.6$ sh ati-driver-installer-11-6-x86.x86_64.run --buildpkg Ubuntu/maverick Created directory fglrx-install.oLN3ux Verifying archive integrity... All good. Uncompressing ATI Catalyst(TM) Proprietary Driver-8.861......................... ===================================================================== ATI Technologies Catalyst(TM) Proprietary Driver Installer/Packager ===================================================================== Generating package: Ubuntu/maverick Package build failed! Package build utility output: ./packages/Ubuntu/ati-packager.sh: 396: debclean: not found dpkg-buildpackage: export CFLAGS from dpkg-buildflags (origin: vendor): -g -O2 dpkg-buildpackage: export CPPFLAGS from dpkg-buildflags (origin: vendor): dpkg-buildpackage: export CXXFLAGS from dpkg-buildflags (origin: vendor): -g -O2 dpkg-buildpackage: export FFLAGS from dpkg-buildflags (origin: vendor): -g -O2 dpkg-buildpackage: export LDFLAGS from dpkg-buildflags (origin: vendor): -Wl,-Bsymbolic-functions dpkg-buildpackage: source package fglrx-installer dpkg-buildpackage: source version 2:8.861-0ubuntu1 dpkg-buildpackage: source changed by ATI Technologies Inc. <http://ati.amd.com/support/driver.html> dpkg-source --before-build fglrx.64Vzxk dpkg-buildpackage: host architecture amd64 debian/rules build Can't exec "debian/rules": Permission denied at /usr/bin/dpkg-buildpackage line 507. dpkg-buildpackage: error: debian/rules build failed with unknown exit code -1 Cleaning in directory . /usr/bin/fakeroot: line 176: debian/rules: Permission denied debuild: fatal error at line 1319: couldn't exec fakeroot debian/rules: dpkg-buildpackage: export CFLAGS from dpkg-buildflags (origin: vendor): -g -O2 dpkg-buildpackage: export CPPFLAGS from dpkg-buildflags (origin: vendor): dpkg-buildpackage: export CXXFLAGS from dpkg-buildflags (origin: vendor): -g -O2 dpkg-buildpackage: export FFLAGS from dpkg-buildflags (origin: vendor): -g -O2 dpkg-buildpackage: export LDFLAGS from dpkg-buildflags (origin: vendor): -Wl,-Bsymbolic-functions dpkg-buildpackage: source package fglrx-installer dpkg-buildpackage: source version 2:8.861-0ubuntu1 dpkg-buildpackage: source changed by ATI Technologies Inc. <http://ati.amd.com/support/driver.html> dpkg-source --before-build fglrx.QEmIld dpkg-buildpackage: host architecture amd64 debian/rules build Can't exec "debian/rules": Permission denied at /usr/bin/dpkg-buildpackage line 507. dpkg-buildpackage: error: debian/rules build failed with unknown exit code -1 Cleaning in directory . Can't exec "debian/rules": Permission denied at /usr/bin/debuild line 1314. debuild: fatal error at line 1313: couldn't exec debian/rules: Permission denied dpkg-buildpackage: export CFLAGS from dpkg-buildflags (origin: vendor): -g -O2 dpkg-buildpackage: export CPPFLAGS from dpkg-buildflags (origin: vendor): dpkg-buildpackage: export CXXFLAGS from dpkg-buildflags (origin: vendor): -g -O2 dpkg-buildpackage: export FFLAGS from dpkg-buildflags (origin: vendor): -g -O2 dpkg-buildpackage: export LDFLAGS from dpkg-buildflags (origin: vendor): -Wl,-Bsymbolic-functions dpkg-buildpackage: source package fglrx-installer dpkg-buildpackage: source version 2:8.861-0ubuntu1 dpkg-buildpackage: source changed by ATI Technologies Inc. <http://ati.amd.com/support/driver.html> dpkg-source --before-build fglrx.xtY6vC dpkg-buildpackage: host architecture amd64 debian/rules build Can't exec "debian/rules": Permission denied at /usr/bin/dpkg-buildpackage line 507. dpkg-buildpackage: error: debian/rules build failed with unknown exit code -1 Cleaning in directory . /usr/bin/fakeroot: line 176: debian/rules: Permission denied debuild: fatal error at line 1319: couldn't exec fakeroot debian/rules: dpkg-buildpackage: export CFLAGS from dpkg-buildflags (origin: vendor): -g -O2 dpkg-buildpackage: export CPPFLAGS from dpkg-buildflags (origin: vendor): dpkg-buildpackage: export CXXFLAGS from dpkg-buildflags (origin: vendor): -g -O2 dpkg-buildpackage: export FFLAGS from dpkg-buildflags (origin: vendor): -g -O2 dpkg-buildpackage: export LDFLAGS from dpkg-buildflags (origin: vendor): -Wl,-Bsymbolic-functions dpkg-buildpackage: source package fglrx-installer dpkg-buildpackage: source version 2:8.861-0ubuntu1 dpkg-buildpackage: source changed by ATI Technologies Inc. <http://ati.amd.com/support/driver.html> dpkg-source --before-build fglrx.oYWICI dpkg-buildpackage: host architecture amd64 debian/rules build Can't exec "debian/rules": Permission denied at /usr/bin/dpkg-buildpackage line 507. dpkg-buildpackage: error: debian/rules build failed with unknown exit code -1 Removing temporary directory: fglrx-install.oLN3ux I've installed devscripts which has debclean in it. I've tried running the command with and without sudo. I'm not experienced with installing from downloads/source, but it seems like the file debian/source isn't being set to be executable when it needs to be. If I extract only, without using the package builder command, debian/rules is 744. As to what to do next, I'm stumped. Many thanks.

  Read the article

• Ubuntu 12.10 - Resolution stuck at 1024x768 using Open Source Radeon Driver

  - by mumble

  I'm using Ubuntu 12.10 with an ATI Radeon HD5670 card. I currently have the open source xorg-edgers driver. I've been using this driver interchangeably with the Radeon open source driver since fglrx seems to give me a lot of freezes. So I can't really use proprietary drivers, the Radeon driver seems to be stable for me, the resolution is the only problem. The resolution is stuck at 1024x768, where my monitor's native resolution is 1366x768. How do I enable that resolution? Going to System Settings Display only gives me 800x600 and 1024x768 by the way. And just another question, how do I know if xorg-edgers driver is enabled? When I run sudo lshw -c video, I still see the radeon driver. configuration: driver=radeon latency=0 Thanks a lot in advance!

  Read the article

• Ubuntu 14.04LTS - runtime video card configuration through Radeon driver

  - by RJVB

  How does one configure Radeon video cards when using the open source Radeon driver - power profile, vsync, etc? Why I try the widely documented solution (against overheating) that worked for me under LMDE (confirmed with kernels up to 3.12.6), I get the following error: $ sudo cat /sys/class/drm/card0/device/power_profile default $ sudo sh -c "echo mid > /sys/class/drm/card0/device/power_profile" sh: echo: I/O error Exit 1 And when I try suggestions from Arch's ATI wiki my modifications are simply ignored: $ sudo cat /sys/class/drm/card0/device/power_dpm_force_performance_level auto $ sudo sh -c "echo high> /sys/class/drm/card0/device/power_dpm_force_performance_level" $ sudo cat /sys/class/drm/card0/device/power_dpm_force_performance_level auto Is this something Ubuntu specific, or something introduced with the 3.13 version of the Radeon driver? I'm encountering this on 2 laptops, one with a Radeon HD6290 (integrated GPU), the other with a discrete RV710 card. The RV710 needs a specific power setting to prevent overheating under LMDE, fortunately it doesn't seem to overheat with the Ubuntu default setting.

  Read the article

• Ubuntu 12.04 - default Radeon driver does not work at all

  - by mumble

  I've recently upgraded to 12.04 LTS and I have an ATI Radeon HD5670. I've heard that the open source 'Radeon' driver is used by default. However, it wasn't showing anything for me. What I did was I added the 'nomodeset' option to boot up and install fglrx. But it didn't work well for me as it introduced a lot of problems (freezes/glitches). So I removed/purged fglrx and am planning to use the open source drivers instead. So my question is this: Why is my default Radeon driver not working? Is anyone having a similar issue? I've also tried using the ubuntu-x-swat driver by running the ff commands: sudo add-apt-repository ppa:ubuntu-x-swat/x-updates sudo apt-get update But the result was the same as the Radeon driver. Nothing shows up on system boot. Any ideas? Thanks in advance! Update Running lspci -nn | grep VGA gives me the following: 02:00.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee ATI Redwood [Radeon HD 5670] [1002:68d8]

  Read the article

• How to setup Dual Head with "radeon" driver for R770?

  - by user1709408

  I want to make dual head setup without xrandr but with Xinerama. I put "Screen 1" line into xorg.conf, but card still show identical output on DVI-2 and DVI-3 It is important to use xinerama for me (to glue three monitors), that's why i decide not to use ranrd (randr is incompatible with xinerama as i read somewhere) Here is my videocard (HD 4850 X2): lspci | grep R700 03:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI R700 [Radeon HD 4850] 04:00.0 Display controller: Advanced Micro Devices [AMD] nee ATI R700 [Radeon HD 4850] Here is how monitors are connected: grep "DVI" /var/log/Xorg.0.log [ 1210.002] (II) RADEON(0): Output DVI-0 using monitor section Monitor0 [ 1210.048] (II) RADEON(0): Output DVI-1 has no monitor section [ 1210.079] (II) RADEON(0): EDID for output DVI-0 [ 1210.080] (II) RADEON(0): Printing probed modes for output DVI-0 [ 1210.128] (II) RADEON(0): EDID for output DVI-1 [ 1210.128] (II) RADEON(0): Output DVI-0 connected [ 1210.128] (II) RADEON(0): Output DVI-1 disconnected [ 1210.128] (II) RADEON(0): Output DVI-0 using initial mode 1920x1200 [ 1210.160] (II) RADEON(1): Output DVI-2 using monitor section Monitor2 [ 1210.215] (II) RADEON(1): Output DVI-3 has no monitor section [ 1210.246] (II) RADEON(1): EDID for output DVI-2 [ 1210.247] (II) RADEON(1): Printing probed modes for output DVI-2 [ 1210.299] (II) RADEON(1): EDID for output DVI-3 [ 1210.300] (II) RADEON(1): Printing probed modes for output DVI-3 [ 1210.300] (II) RADEON(1): Output DVI-2 connected [ 1210.300] (II) RADEON(1): Output DVI-3 connected [ 1210.300] (II) RADEON(1): Output DVI-2 using initial mode 1920x1200 [ 1210.300] (II) RADEON(1): Output DVI-3 using initial mode 1920x1200 Here is my /etc/X11/xorg.conf Section "ServerFlags" Option "RandR" "0" Option "Xinerama" "1" EndSection Section "ServerLayout" Identifier "Three Head Layout" Screen "MyPrecious0" Screen "MyPrecious2" RightOf "MyPrecious0" Screen "MyPrecious3" LeftOf "MyPrecious0" EndSection Section "Screen" Identifier "MyPrecious0" Monitor "Monitor0" Device "Device300" EndSection Section "Screen" Identifier "MyPrecious2" Monitor "Monitor2" Device "Device400" EndSection Section "Screen" Identifier "MyPrecious3" Monitor "Monitor3" Device "Device401" EndSection Section "Device" Identifier "Device300" BusID "PCI:3:0:0" Screen 0 Driver "radeon" EndSection Section "Device" Identifier "Device400" BusID "PCI:4:0:0" Screen 0 Driver "radeon" EndSection Section "Device" Identifier "Device401" BusID "PCI:4:0:0" Screen 1 Driver "radeon" EndSection Section "Monitor" Identifier "Monitor0" EndSection Section "Monitor" Identifier "Monitor2" EndSection Section "Monitor" Identifier "Monitor3" EndSection I tried to switch to vesa driver (didn't work for me) I tried to add options like Option "ZaphodHeads" "DVI-2" and Option "ZaphodHeads" "DVI-3" into sections "Device 400" and "Device 401" (this didn't help because "ZaphodHeads" option is for ranrd, and randr is disabled by decision) I tried to merge sections "Device 400" and "Device 401" into one section and add Option "ZaphodHeads" "DVI-2,DVI-3" (see comment about randr above) single section setup helps to change log line RADEON(1): Output DVI-3 has no monitor section into RADEON(1): Output DVI-3 using monitor section Monitor3 but nothing was enough to switch from screen cloning to separate screens. This problem (lack of documentation on radeon driver) is similar to these: Radeon display driver clones monitors while using Xinerama (moderators decision to close that problem was wrong) Ubuntu 12.10 multi-monitor setup isn't working The problem is solvable, because this hardware worked as three headed for me earlier with gentoo/xorg-server-1.3 Xorg -configure creates setup for the first monitor on the first GPU Please don't advise to use fglrx/aticonfig/amdcccle (this goes against my religion beliefs)

  Read the article

• Ubuntu 14.04 ATI Radeon open source driver with distorted video playback

  - by Bwog

  Video in VLC or SMplayer is often in black and white with washed-out colors in the wrong place (translated considerably). Moreover, the last video image is often visible when a new video is started and persist as long as the new video is running. Colors have a recognizable shape (e.g. a persons clothes or face), but can be obviously incorrect (e.g. green or purples faces). This is independent of the format of the videos (mp4, mkv, wmv). Sometimes all problems disappear when a new video is started, but often only a reboot restores normal video. Ubuntu was upgraded to 14.04 and is fully updated. Processor intel core i5-2500K cpu. gpu: amd/ati Radeon HD 7950. graphics: gallium 0.4 on AMD Tahiti. xorg xserver amd/ati display driver wrapper from xserver-xorg-video-ati. :~$ Xorg -version X.Org X Server 1.15.1 Release Date: 2014-04-13 X Protocol Version 11, Revision 0 Build Operating System: Linux 3.2.0-37-generic x86_64 Ubuntu Current Operating System: Linux Mare 3.13.0-29-generic #53-Ubuntu SMP Wed Jun 4 21:00:20 UTC 2014 x86_64 Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-29-generic.efi.signed root=UUID=number ro Build Date: 16 April 2014 01:36:29PM xorg-server 2:1.15.1-0ubuntu2 Current version of pixman: 0.30.2 ~$ lspci | grep VGA 01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Tahiti PRO [Radeon HD 7950/8950 OEM / R9 280] Question: how to restore regular video playback?

  Read the article

• Gnome3 shell video corruption with ATI Radeon HD 4850 on 11.10 Oneiric

  - by AndyAtTheWebists

  I have a problem similar to what's been mentioned in a few other questions, namely: Ati incompatible with Gnome-shell? Gnome Shell Glitched Top Bar Ubuntu 11.10 I have read a number of other posts here and on other forums and have tried a bunch of different solutions. The Problem The problem manifests itself only in Gnome3. I have tried KDE, Unity and KFCE and all are fine. The graphics corruption is visible only on gnome panels (see images below). Everything works fine with the free ATI drivers, but they just lack power. The problem occurs with the proprietary ones from AMD/ATI. I have installed version 11.11 and 12.1 as per the instructions on wiki.cchtml.com/index.php/Ubuntu_Oneiric_Installation_Guide. I have the same exact problem in both cases. I have tried this on clean installs of Ubuntu 11.10 Oneiric Ocelot (x64 and x86) and on Linux Mint 12 (x64) with the same results. Also, it looks like after some time of not using it, the PC just freezes. Maybe an overheat? Will look into it. Things I've Tried I have tried the following fixes: Different versions of drivers from ATI including the latest - this worked for some, not for me. Installing Oneiric specific package generated from driver, as well as the default install Removed the Unity Global menu Disabled file manager handling desktop Disabled Compiz "detect refresh rate" Sync to VBlank in Compiz on and off Please help! This is the first time in 10 years that I've finally had the chance to switch my primary desktop to Linux (stopped doing .NET dev work), and this is really getting me down. This is what the problem looks like: And:

  Read the article

• Ubuntu 12.04 resolution issue ATI radeon x1600

  - by JP Hellemons

  I have a brand new Ubuntu 12.04 installation, but my resolution is set to 800*600 4:3 and my resolution using windows xp is 1440*900 but that option is unavailable for me. When I search for restricted drivers, there are none. So I searched the ati website and downloaded a .run file of about 80 mb. but that gave me an error when I tried to open it. I downloaded some fglrx thing from the repositories and now there are some widescreen options available but still no 1440*900 there is some ATI controlpanel installed, but when I try to open it, it fails telling me that there is now suitable driver. ps. my video card is a 512MB ATI Radeon Sapphire X1600 AGP

  Read the article

• Fixing Mobility Radeon HD3650 driver in 12.04 LTS

  - by Kevin

  Okay, I know the subject has been discussed many times, but i dont find any of the instructions working. Most promising guide was here https://launchpad.net/~makson96/+archive/fglrx ive also tried https://help.ubuntu.com/community/BinaryDriverHowto/ATI because since the driver installation was written on other sites as well, this page included a "patch" file, but since im unaware how to patch installations, im out of luck. If i understand correctly, the patch should fix the driver and eliminate constant error messages. My system is 64bit 12.04 LTS and card is Mobility Radeon HD3650. Usual installation of the driver results in weird display resoulution (1100x something, while it should be 1440x900) and even 3d games did not work. Can anyone give me any more pointers? Much appreciated!

  Read the article

• ATI Radeon XPress 1200 Graphics Card Driver Install Problems

  - by 16trohrt

  I've got an ATI Radeon XPress 1200 Graphics Card, and the default driver isn't cutting it. I downloaded the proprietary driver .run file ("ati-driver-installer-9-3-x86.x86_64.run") from AMD, and tried to run it with sudo sh ati-driver-installer-9-3-x86.x86_64.run. Everytime I try and to it I get this error: Error: ./default_policy.sh does not support version default:v2:i686:lib::none:3.8.0-25-generic; make sure that the version is being correctly set by --iscurrentdistro I don't know what's throwing it, and I would really appreciate some help. Thanks in advance! :)

  Read the article

• Need help with xorg.conf for dual Radeon HD6450 video cards with 4 monitors

  - by Eriks Goodwin-Pfister

  I am running 64-bit Ubuntu 13.10 with Unity and have dual (2) Radeon HD6450 video cards and 4 Hanns-G HL273 monitors. Each Radeon card is driving one monitor via DVI and the other via VGA. I am running the proprietary video drivers from AMD's web site: "amd-catalyst-13.11-beta V9.4-linux-x86.x86_64.run" I tried to use "amd-catalyst-13.12-linux-x86.x86_64.run" but could not get that newer version to install. What I need help with is how to "correct" my xorg.conf file and any other needed instructions to get all four of my monitors to work as a continuous desktop that allows me to drag things from one monitor to the next, etc. When I tried to use the default open source drivers that came in Ubuntu 13.10, only three of the monitors would work. Now that I am running the proprietary ones, all four monitors come on and I can move my mouse from one end to the other--but only the right-most monitor displays my desktop and allows me to "do anything". Any time I move my mouse to any of the other three monitors (which display all-white), it turns into an "X" and does not do anything else but move. Enabling xinerama makes all four displays go all-black after login. I do have amdcccle installed, but it does not seem to have the ability to handle my particular configuration. My Current xorg.conf: Section "ServerLayout" Identifier "Basic Layout" Screen 0 "Screen1" 5760 0 Screen 1 "Screen0" 0 0 Screen 2 "Screen2" 3840 0 Screen 3 "Screen3" 1920 0 EndSection Section "Module" EndSection Section "Monitor" Identifier "0-DFP2" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "PreferredMode" "1920x1080" Option "TargetRefresh" "60" Option "Position" "0 0" Option "Rotate" "normal" Option "Disable" "false" EndSection Section "Monitor" Identifier "0-CRT1" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "PreferredMode" "1920x1080" Option "TargetRefresh" "60" Option "Position" "0 0" Option "Rotate" "normal" Option "Disable" "false" EndSection Section "Monitor" Identifier "1-DFP2" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "PreferredMode" "1920x1080" Option "TargetRefresh" "60" Option "Position" "0 0" Option "Rotate" "normal" Option "Disable" "false" EndSection Section "Monitor" Identifier "1-CRT1" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "PreferredMode" "1920x1080" Option "TargetRefresh" "60" Option "Position" "0 0" Option "Rotate" "normal" Option "Disable" "false" EndSection Section "Device" Identifier "Device0" Driver "fglrx" Option "Monitor-CRT1" "1-CRT1" BusID "PCI:1:0:0" EndSection Section "Device" Identifier "Device1" Driver "fglrx" Option "Monitor-DFP2" "0-DFP2" BusID "PCI:4:0:0" EndSection Section "Device" Identifier "Device2" Driver "fglrx" Option "Monitor-DFP2" "1-DFP2" BusID "PCI:1:0:0" Screen 1 EndSection Section "Device" Identifier "Device3" Driver "fglrx" Option "Monitor-CRT1" "0-CRT1" BusID "PCI:4:0:0" Screen 1 EndSection Section "Screen" Identifier "Screen0" Device "Device0" DefaultDepth 24 SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen1" Device "Device1" DefaultDepth 24 SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen2" Device "Device2" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen3" Device "Device3" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection

  Read the article

• VLC Ati Radeon 6870 Ubuntu 12.04 image skewed flicker

  - by Aaron

  I'm running Ubuntu 12.04 with ATI Radeon 6870 connected to my 40' Sharp TV. The video image is slightly jigged, like breaking a bit and slightly delayed. It just isn't smooth. The computer is very fast, like i7 with 12gb ram. I tried to run the same video with my mac laptop and on the tv with the same connection cable and it was running smoothly. i tried changing the video output in VLC to x11, increase caching, h264 skip loop filter to all, increase monitor refresh rate although it's already at 60 and it's an LCD tv. this is my xorg.conf : Section "ServerLayout" Identifier "amdcccle Layout" Screen 0 "amdcccle-Screen[3]-0" 0 0 EndSection Section "Module" Load "glx" EndSection Section "Monitor" Identifier "0-DFP9" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "TargetRefresh" "60" Option "Position" "0 0" Option "Rotate" "normal" Option "Disable" "false" Option "PreferredMode" "1920x1080" EndSection Section "Monitor" Identifier "0-DFP10" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "PreferredMode" "1280x1024" Option "TargetRefresh" "60" Option "Position" "0 0" Option "Rotate" "normal" Option "Disable" "false" EndSection Section "Device" Identifier "amdcccle-Device[3]-0" Driver "fglrx" Option "Monitor-DFP9" "0-DFP9" BusID "PCI:3:0:0" EndSection Section "Screen" Identifier "Default Screen" DefaultDepth 24 EndSection Section "Screen" Identifier "amdcccle-Screen[3]-0" Device "amdcccle-Device[3]-0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection

  Read the article

• I cannot upgrade to 12.10 because of graphic-card, Radeon HD 3450

  - by minime

  I wonder what has happened. I have Ubuntu 12.04 and Ati Radeon HD 3450 and that has supported 3D, now suddenly it does not accept my graphic-card. I really would like to know what to do? Should I buy a new graphic card or is there a way to use my graphic-card on 12.10? And if so what is there a graphic-card I should buy? My Ati is functioning with 3D, on 12.04 I don't understand why it will not upgrade to 12.10.

  Read the article

• Unity does not load when selecting Xorg open source radeon driver

  - by Teddy Thorpe

  When I select the X.org Radeon open source driver, Unity does not load. However, when I select the Proprietary AMD Driver from the official Ubuntu repository, Unity does load. Why is Unity doing this? I had no problems with switching between these drivers in Ubuntu 12.04 LTS. This started happening when I upgraded to Ubuntu 12.10. Before I ever installed the propriatery AMD driver, the X.org driver loaded Unity fine, but very sluggishly. I downloaded the AMD driver from their official website and installed that first and that is what started this problem. I removed that driver and went back to X.org and X.org didn't load Unity either. Then using Synaptic, I installed the AMD driver from the Ubuntu repositories and thats what I'm using now. I'm very confused why that downloaded AMD driver would effect X.org. I have a AMD Radeon HD 6620G. It's integrated graphics on my AMD A8-3500M APU (Accelerated Processing Unit as AMD advertises it).

  Read the article

• Radeon 9200 Driver?

  - by usuhh86

  I've been using Linux for a while, but haven't really done more than installed programs. I have Ubuntu 12.04 with an ATI Radeon 9200 graphics card. Ubuntu didn't recognize it during the install. All I want is a driver. Preferably the proprietary driver, but I'll settle for an open-source one if I need to. I went to the AMD support website, and whenever I click on the download link for "ATI Proprietary Linux x86 Display Driver 8.28.8" I get redirected to the main AMD website. I tried this on Firefox, Chrome, even booted up my netbook and tried it on IE9. Does anybody have a download link? And if not, a link to download an open-source alternative? Any help will be greatly appreciated. I'm pretty much still a newbie at this. OpenGL vendor string: Tungsten Graphics, Inc. OpenGL renderer string: Mesa DRI R200 (RV280 5961) x86/MMX/SSE2 TCL DRI2 OpenGL version string: 1.3 Mesa 8.0.2 Not software rendered: yes Not blacklisted: yes GLX fbconfig: yes GLX texture from pixmap: yes GL npot or rect textures: yes GL vertex program: yes GL fragment program: no GL vertex buffer object: yes GL framebuffer object: yes GL version is 1.4+: no Unity 3D supported: no

  Read the article

• ATI Radeon HD 4650 AGP Video card not recognized properly

  - by PastorLarry

  I have an ASUS ATI Radeon HD 4650 AGP in this system (yeah, I know how old it is). I've been on Ubuntu since 10.04, and the system has never properly recognized the card. I have always had the VESA drivers installed. Now that I have the time to address the problem, 12.04 was listing the card as "Unknown" under the System Settings. Meanwhile, Sysinfo recognizes the card as: Advanced Micro Devices [AMD] nee ATI RV730 Pro AGP [Radeon HD 4600 Series] (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. Device 0028 So I know that this card should be using the radeon driver (or even the radeonhd driver). However, when I installed the mesa-utils package, the card is suddenly reported as: Gallium 0.4 on llvmpipe (LLVM 0x300) So now, I'm completely at a loss. It seems that the llvmpipe stuff has to do with OpenGL, but it still appears that I don't have the proper video driver installed. That being said, anyone know what I can do to force the system to recognize the card and use the radeon driver? [EDIT 05.28] I did look at some other information, including glxinfo and a couple of other commands (it was REALLY late, so I don't remember the other commands) and I got these: glxinfo | grep vendor: server glx vendor string: SGI client glx vendor string: Mesa Project and SGI OpenGL vendor string: X.org glxinfo | grep renderer: OpenGL renderer string: Gallium 0.4 on AMD RV730 One of the other commands gave a whole lot of info and near the end stated that the activation string for the radeon driver was "modprobe radeon". I've tried that from sudo and as root, but it doesn't seem to change anything. I'm at a complete loss. I've even added the xorg-edgers ppa to my Software Sources and updated and rebooted the system, but nothing has changed. Most of all, I can't seem to find any documentation on this issue, as it seems that it's assumed that the radeon driver will install automatically, no questions asked. I feel like such a newbie. Does anyone have any ideas on this? [edit 05.28] results of lsmod | grep radeon (in a more readable format than the comment below): radeon 733693 3 ttm 65344 1 radeon drm_kms_helper 45466 1 radeon drm 197692 5 radeon,ttm,drm_kms_helper i2c_algo_bit 13199 1 radeon [edit 05.29] This is my /etc/X11/xorg.conf: Section "ServerLayout" Identifier "aticonfig Layout" Screen 0 "aticonfig-Screen[0]-0" 0 0 EndSection Section "Module" EndSection Section "Monitor" Identifier "aticonfig-Monitor[0]-0" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Device" Identifier "aticonfig-Device[0]-0" Driver "fglrx" BusID "PCI:1:0:0" EndSection Section "Screen" Identifier "aticonfig-Screen[0]-0" So here is my question. Can I simply change the name of the driver in the device section to "radeon" instead of "fglrx" and have the radeon driver work? Or is ther a way to use this as a tmeplate and change the appropriate lines and activate the radeon driver through this file?

  Read the article

• Ati Radeon HD 3200 Graphics driver - Installation Problem

  - by samufi

  I have a fresh installation of Ubuntu 12.04 x86 and I am trying to install the proprietary driver for my "Radeon HD 3200 Graphics" video card. I know that there are already many threads about this topic, but I did not find a solution for my problem: For the installation I followed exactly these instructions: What is the correct way to install ATI Catalyst Video Drivers in 12.04 LTS? During the process I faced these problems: I executed ~$ debconf libstdc++6 dkms libqtgui4 wget execstack libelfg0 dh-modaliases and got: debconf: DbDriver "passwords" warning: could not open /var/cache/debconf/passwords.dat: Keine Berechtigung Can't exec "libstdc++6": Datei oder Verzeichnis nicht gefunden at /usr/share/perl/5.14/IPC/Open3.pm line 186. open2: exec of libstdc++6 dkms libqtgui4 wget execstack libelfg0 dh-modaliases failed at /usr/share/perl5/Debconf/ConfModule.pm line 59 (translation of the German parts: "Keine Berechtigung" means: "no permission"; "Datei oder Verzeichnis nicht gefunden" means: "File or folder not found") Because I had no idea if it was a big issue, I just continued: ~$ sudo apt-get install ia32-libs There I got: Paketlisten werden gelesen... Fertig Abhängigkeitsbaum wird aufgebaut Statusinformationen werden eingelesen... Fertig Paket ia32-libs ist nicht verfügbar, wird aber von einem anderen Paket referenziert. Das kann heißen, dass das Paket fehlt, dass es abgelöst wurde oder nur aus einer anderen Quelle verfügbar ist. E: Paket »ia32-libs« hat keinen Installationskandidaten (Translation: [...] the package ia32-libs is not available but is referenced by an other package [...] E: package »ia32-libs« has no installation candidate) Once more I went on. The next steps worked quite fine. But when I came to the point: ~$ sudo dpkg -i *.deb There I got A popup message, something like there was a problem with a system application but in the terminal no errors were reported, also the packages seemed to be installed. so now the Ati Catalyst Center works amdcccle but fglrxinfo gave me X Error of failed request: BadRequest (invalid request code or no such operation) Major opcode of failed request: 139 (ATIFGLEXTENSION) Minor opcode of failed request: 66 () Serial number of failed request: 13 Current serial number in output stream: 13 So there is something wrong. (Also there is not the possibility to enable these nice graphical features - the reason why I installed the proprietary driver) Because I worked with a completely fresh Installation I don't know how to fix the problem. If anybody could help I would be very tahnkful! =)

  Read the article

• Best Ati Radeon x1200 drivers for 12.10

  - by Jaclyn

  [Long story short is at the bottom if you don't care about my ranting] Ok, well, I have the unfortunate distinction of having an Acer Extensa 4420 (Yes, the model with the faulty motherboard, and no, I do not know how it is still working either). Long story short I need the best drivers for my Ati Radeon x1200 integrated graphics card. The Ati Propriatary drivers for 12.10 no longer supports my video card. Currently when I try to play Minecraft, or any game really, the framerate is quite terrible despite the fact that my handy dandy system load monitor says that I have plenty of memory and CPU power (Mind you, this is when I'm not playing minecraft; that kind of uses up all of my resources unless it's on the worst graphical settings, and even then I have terrible framerate, but plenty of resources left over). I tried the fglrx through a workaround guide, and it completely killed my display and I had to uninstall it. I'm considering just trying to install fglrx through synaptic, but I am hesitant to do so since I don't want a repeat of the BSBDD!!! (Black Screen of Bad Drivers 'o DOOOM!!!), so I will wait until after I get some input from you fine ladies and gentlemen on to what your advice it. ok, so I'm running xubuntu 12.10 64 bit. I upgraded from 10.10 to 11.04. Then about a month ago I went from natty to quantal via the update option in the package updater, and then I decided that I was sick of gnome so I installed xfce. I did not install new drivers from natty to when I wound up at 12.10, so that shouldn't have changed, and they were indeed quite terrible back then, but now I'm using xubuntu as my main os, so I actually need good drivers. uuuugh. Anyway, long story short: I need to know what are the best drivers available for my card, and how to install them, because I am a linux novice, and I have tried everything that I can think of, including search google. Small edit: I forgot to note that since I upgraded to 12.10, my VGA out does not work (I haven't had a chance to try the s-video yet), and possibly related, the USB port on that side of my laptop does not work anymore either.

  Read the article

• Which driver for ATI Radeon 9600 All-In-Wonder

  - by vanja

  I'm very new to Ubuntu and Linux for that matter, and wondering if anyone there found proper drivers for ATI Radeon 9600 All-In-Wonder. The system (Ubuntu 12.04) doesn't let me change screes resolution and it's not recognizing the card.. I found this page http://wiki.cchtml.com/index.php/Hardware that shows some info but i'm really confused where to start and if it's possible at all to make everything work. Any help would be really appreciated. Thanks in advance!! -vanja

  Read the article

• Split screen and other issues on Ubuntu 11.10 with ATI graphics card

  - by garus

  Ever since updating my Ubuntu 11.04 to 11.10 I experience issues with graphics. The biggest is the "split screen" effect where my desktop is shifted to the right, resulting in having Unity bar in the middle of the screen. As shown here: http://i.imgur.com/I8nmZ.jpg This changes from boot to boot, sometimes it's on the left, sometimes in the middle. What I tried: Removing fglrx drivers completely Installing post-update version of them, but installation is broken ATM in the Ubuntu, so no go. No one is even trying to fix it (bug report https://bugs.launchpad.net/ubuntu/+source/nvidia-common/+bug/873058 and a couple of duplicates out there) Also using the open source "radeon" driver results in the same (I have a better successful boot ratio with this one, proprietary rarely lets me boot) Other artifacts are: serious screen tearing weird lines flickering in random places lagginess Did anyone experience that? My specs: Ubuntu 11.10 AMD Radeon HD 6950 1GB

  Read the article

• How to install Radeon Open Source Driver?

  - by Clintonio

  I have an MSI Radeon HD 7850 card. MSI provide no Linux support, and the AMD driver gives me an Unsupported Hardware watermark that does not show up in screenshots. I uninstalled the proprietary driver and found that Unity 3D no longer works, and I really only picked Ubuntu because of the excellent shortcuts provided in the recent versions. Trying to locate the open source driver has been a pain for me. According to the documentation I have read it is pre-included in Ubuntu 12.04, yet there is no Unity 3D support. I tried using the newest drivers from AMD's website, but that also had the watermark. Does anyone know how I can get the open source driver? If not, does anyone know how to remove the watermark. I'm on the verge of going back to Windows.

  Read the article

• Radeon HD 6290 terrible performance on a certified laptop

  - by dac

  I bought Asus K53U laptop, which is Ubuntu certified with pre-installed 11.10. The graphic card is Radeon HD 6290 but 720p playback is terrible. Even page scrolling in Firefox is very laggy. Proprietary drivers are installed by default. How is this possible, why is the laptop Ubuntu certified if the performance is poor? Any solution to this? I just did apt-get autoremove, and after that, this message came out in terminal: Error inserting vesafb (/lib/modules/3.0.0-15-generic/kernel/drivers/video/vesafb.ko): No such device Could that be the problem?

  Read the article

• Radeon HD5670 hangs after login

  - by pKaresz

  Thanks in advance for your advices. I installed, Ubuntu 12.04 today, on my PC with a Radeon hd5670 graphics card. The first error I encountered, (just like the first time Unity came out - after witch I waited to try Ubuntu again until now) is, that it hanged after login at the desktop wallpaper, with only the mouse cursor. Well actually the first problem was with the live CD, but I managed to install it, using the install now, not the try now. Live CD has the same problem, as after install. So, after installing and getting the error, I searched of course before asking this:) I found this: Ubuntu hangs at purple screen The accepted answer there helped me to get to this. (note, that the below picture is a screen taken from a working desktop, and then erased the parts that don't show on mine.) Note that there is nothing at the top except the brown bar. No shutdown button, no nothing. The system hangs, I can't click on anything, I can only wiggle around with my mouse XD

  Read the article

1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >