Search Results

Search found 48 results on 2 pages for 'aubrey robertson'.

Page 1/2 | 1 2  | Next Page >

  • Why won't my Internet stay connected?

    - by Aubrey
    I recently updated to Ubuntu 12.04, from Ubuntu 10.04, and my Internet, USB760 Novetel Verizon-Wireless Mobile Broadband, will connect after a minute of me starting the computer up. But after a while it will disconnect and the only way to reconnect it is to restart the computer. Even then, sometimes it won't work. I've also noticed that since I've upgraded the computer, the computer will randomly enter into Power Save mode, and then it will tell me to log back in. I've done nothing to provoke it, other than using the Internet. I was wondering, could the entering into Power Save mode and the Internet disconnecting be somehow connected? I've updated the computer every time it asks me to do so, but it doesn't seem to be helping. If Ubuntu 10.04 would still be supported by next year, I would downgrade. But I have no other choice than to stick with 12.04. Any help would be greatly appreciated! Thanks!

    Read the article

  • Windows Server 2012 Migration (DNS/AD DS Standard Eval to Essentials OEM) P2V -> Do I need a Secondary Domain Controller during migration?

    - by Aubrey Robertson
    This is my first post on this exchange (although not my first on stack exchange), so please have patience. I am a 3rd year student intern, and I have been tasked with virtualizing the server systems at the company I work for. I have come a long way, and I am almost ready to install the VM Server in migration mode. Here is some information: Source Server: Windows Server 2012 Standard Evaluation DNS Server (local only) Advanced Directory Domain Services File and Storage stuff A few other server roles Destination Server: Windows Server 2012 Essentials OEM (Hyper-V client) Running under a temporary Hyper-V host (will migrate the Hyper-V host back to the old machine after the original server is virtualized as a client). Sitting currently at the "Select Installation Mode" screen. I have been following the guides on Microsoft tech net, and today I spent most of the day getting rid of issues in the Best Practices Analyser on the source machine. I have 3 remaining issues (which are all related): ERROR: DNS: DNS servers on Ethernet (adapter name) should include the loopback address, but not as the first entry (flavour text indicates that, during migration, the DNS server may not be found) WARNING: All domains should have at least two domain controllers for redundancy. WARNING: DNS: Ethernet should be configured to use both a preferred and an alternate DNS Server. All of these issues can be resolved by deploying a secondary domain controller, but I have never done that before (see my concerns below). The main issue here that I am concerned with for installing in migration mode is the FIRST one (the error). If I try and set-up the new server deployment, and the adapter domain controller is listed as localhost, then this may cause the installation to fail. (at least, this is what the Microsoft documentation suggests). But I do not have another IP address to enter here as I have no other local domain controllers. So I did the first obvious thing that came to my mind, and tried to use Google DNS servers as my alternates. That did not work because they couldn't recognize other computers in the "forest". Now I'm no expert when it comes to DNS, so please forgive my ignorance. This DNS server is concerned only with Active Directory stuffs for the local network. If I go ahead with migration, and it fails, then I will just have to go ahead and install a secondary DNS server I suppose. The problem I have here is that I am limited by the amount of Windows Server keys I have available (I have 2); however, I do have access to a Linux box running Debian Wheezy that I set-up two weeks ago as a Mantis server. I could install Windows Server 2012 as a secondary DNS (I think) in a VM and use that, but then it seems like I will be wasting time, and probably the Windows key too, and if there's another way to do it with Linux that would be much better. Even better still, do I even need a secondary DNS server for migration at all? The hints said that during migration the original machine "might" not be found. Thank you for your time and consideration.

    Read the article

  • Inserting HTML code with jquery

    - by J. Robertson
    One of our web applications is a page that takes in a serial number and various information is returned and displayed to the user. The serial is passed via AJAX, and based on the response, one of the following can happen - An error message is shown A new form replaces the previous form Now, the way I am handling this is to use jQuery to destroy (using $.remove()) the table that displayed the initial serial form, then I'm appending another html table that contains another form. Right now I am including that additional form as part of the html source, and just setting it to display:none, then using jQuery to show it when appropriate. However, I don't like this approach because if someone views source on the page, they can see that table html code that is not being displayed. My next thought would be to use AJAX to read in another HTML file, and append it that way. However, I am trying to keep down the number of files this project uses, and since most pages in our project will use AJAX, I could see a case where there are multiple files containing HTML snippets - and that feels sloppy to me. What is the best way to handle a case where multiple html elements are being shown and removed with jQuery?

    Read the article

  • 2.0 speeds on USB hub?

    - by Matthew Robertson
    How capable are USB hubs? I have an AirPort Extreme router with a printer attached (it's not powered by USB). I want to extend this and add two hard drives (one for Time Machine and the other for EyeTV recordings). Can a 4-port USB hub (I'm considering this one) achieve USB 2.0 speeds and power the hard drives? What difference would a self-powered vs externally-powered hub produce?

    Read the article

  • Ubuntu 10.04 with HD flash

    - by Brad Robertson
    Just noticed that 10.04 is out. My media server has been packed away for a few months but I might dust if off and give 10.04 a shot but I thought I'd see if anyone has any success stories with HD flash in either Chrome or Firefox. I'm currently running Ubuntu 9.10 and it was a large enough pain to get VDPAU working with my Zotac Ion-ITX-C board (eventually found an mplayer PPA that had it compiled in) From reading the 10.04 docs it looks like this is standard now, but I'm wondering about streaming HD, from, say flash or Divx. I've never been able to get HD flash to play without it being extremely choppy, and I chalk this up to the lack of hardware assisted decoding like VDPAU (a guess). My board certainly isn't a competitor in CPU power or memory, which is why i've needed the HW accelerated decoding for HD vids in the past. Just wondering if anyone has had any success stories playing HD vid online (flash, divx or what have you)

    Read the article

  • Understanding Security Certificates (and thier pricing)

    - by John Robertson
    I work at a very small company so certificate costs need to be absolutely minimal. However for some applications we do Need to have our customers get that warm fuzzy not-using-a-self-signed certificate feeling. Since creating a "certificate authority" with makecert really just means creating a public/private key pair, it seems pretty clear that creating a public/private key pair FROM such a "certificate authority" really just means generating a second public/private key pair and signing both with the private key that belongs to the "certificate authority". Since the keys are signed anyone can verify they came from the certificate authority I created, or if verisign gave me the pair they sign it with one of their own private keys, and anyone can use verisigns corresponding public key to confirm verisign as the source of the keys. Given this I don't understand when I go to verisign or godaddy why they have rates only for yearly plans, when all I really want from them is a single public/private key pair signed with one of their private keys (so that anyone else can use their public keys to confirm that, yes, they gave me that public/private key pair and they confirmed I was who I said I was so you can trust my public/private key pair as belonging to a legitimate third party). Clearly I am misunderstanding something, what is it? Does verisign retire their public/private key pairs periodically so that my verisign signed key pair "expires" and I need new ones? Edit: I learned that the certificate has an internal expiration date and it also maintains an internal value stating whether it can be used to sign other certificates (i.e. sign other private/public key pairs stored as certificates). Can't I get a few (even one) non-signing certificate signed by someone like verisign that I can use for authentication/encryption without a yearly subscription?

    Read the article

  • How do I get VDPAU working with Ubuntu 9.1?

    - by Brad Robertson
    What do I need to do to get MKV HD videos playing with VDPAU and also Blu-ray discs? Lots of people say you need to compile the latest MPlayer (which I haven't had luck doing) for VDPAU. I found an mplayer ppa that says it has VDPAU compiled into it so I'd like to use that. What packages do I need for playing MKV files and Blu-ray with the video decoding offloaded to my GPU? So far I haven't had any luck with any of the tutorials I've found. I'm just looking for a quick synopsis that will tell me what I'm looking for as I'm kind of shooting in the dark. (I didn't know what VDPAU was until a few days ago.)

    Read the article

  • ubuntu ppa's and apt precedence

    - by Brad Robertson
    I'm trying to get the latest mplayer installed with vdpau support. Haven't had any luck so far. I found a PPA that says it works and I want to install it. I added the PPA to my apt.sources and did an update. I just wanted to know, how do I know that I'm now installing the mplayer package from the PPA, and not Ubuntu's standard repositories? From what I see I just install the same package using apt-get install mplayer. How do I know which mplayer I'm getting? Where do I specify what takes precedence?

    Read the article

  • is airtunes compatible with airsharing

    - by Mitch Robertson
    I have an Airport Express that I have plugged into a speaker system. I can change the music in my house with my iPhone through Apple's Remote app. Great. Now is my Airport Express compatible with Air Sharing? Can I 'push' music or sound to my Airport Express and out the speakers that are plugged into it? Or is this only possible with an Apple TV? And if I get an Apple TV can I do what I'm trying to do? 'Push' music from someone's iPhone that is on the same WIFI network as mine to a speaker system?

    Read the article

  • How do I get VDPAU working with Ubuntu 9.10?

    - by Brad Robertson
    What do I need to do to get MKV HD videos playing with VDPAU and also Blu-ray discs? Lots of people say you need to compile the latest MPlayer (which I haven't had luck doing) for VDPAU. I found an mplayer ppa that says it has VDPAU compiled into it so I'd like to use that. What packages do I need for playing MKV files and Blu-ray with the video decoding offloaded to my GPU? So far I haven't had any luck with any of the tutorials I've found. I'm just looking for a quick synopsis that will tell me what I'm looking for as I'm kind of shooting in the dark. (I didn't know what VDPAU was until a few days ago.)

    Read the article

  • Only two monitor ports are detected on nVidia Quadro NVS 450

    - by Erick Robertson
    I have an nVidia Quadro NVS 450 installed in a Dell Optiron 380. Only DisplayPort #1 and DisplayPort #4 are detected by windows. The machine has a BIOS setting to automatically choose the primary video card, or to disable the primary when a PCI-e card is installed (which it is). Windows cannot see DisplayPort #2 and #3 no matter what I do. I have tried the Windows Drivers, latest nVidia Drivers - no dice. I am assured that this video card cannot break in this way. I'm plum out of ideas. I've tried reseating the video card. I've contacted Dell and they've remoted in and looked around - threw their arms up after two hours. Any ideas? I'm running Windows 7 64-bit. All four monitors are 1600x1200 Dell monitors.

    Read the article

  • nginx proxy to different path

    - by David Robertson
    I've read through the documentation for nginx's HttpProxyModule, but I can't figure this out: I want it so that if someone visits, for example http://ss.example.com/1339850978, nginx will proxy them http://dl.dropbox.com/u/xxxxx/screenshots/1339850978.png. If I was to just use this line in my config file: proxy_pass http://dl.dropbox.com/u/xxxxx/screenshots/;, then they would have to append the .png themselves. tia, David.

    Read the article

  • What is blocking incoming packets to port 67?

    - by Peter Robertson
    I have a DSP connected to a Windows 7 laptop by Ethernet. The laptop has all firewalls disabled (I've even tried stopping the Windows firewall service and DHCP). The DSP is sending well-formed BOOTP broadcast packets every 3 seconds to port 67. Wireshark running on the laptop sees these BOOTP packets coming in. I have a program running on the laptop with a socket successfully bound to port 67. I can see this using CurrPorts.exe. Nothing else is shown as accessing port 67. The program never sees any packets coming in. If I run a program in the DSP that sends ordinary UDP packets to port 67, Wireshark sees them coming in and reports that they are corrupt BOOTP packets, but now, my program gets them. Any idea what's going on here?

    Read the article

  • Drive Shows No Files But Half Space Gone

    - by Chance Robertson
    I have a 500 GB USB drive. When I go to Windows Explorer or Finder, the drive shows that about half the drive is free. However, when I open either drive in Windows 7 or OS X, no files how up. I have tried to look at the files through the command line and nothing shows. A while back, I hooked it up to my MacBookPro and there was a quick message that said the drive was not ejected properly, blah, blah. And of course I did not read the message and hit OK. It there any way to get back my files from the drive?

    Read the article

  • OpenVPN to connect remote networks, peer to peer instead of client/server possible?

    - by John Robertson
    I would like to connect two remote networks using OpenVPN. I am very new to this we are very small and don't have a sys/network admin. What are the possible setups to have both networks both live on a common LAN via OpenVPN? I would prefer to use the UDP peer model rather than client/server. Is there a way to set that up instead? I can't see how because no computer on existing network A has a routable address to any computer on existing network B and vice versa.

    Read the article

  • Make GRUB automatically boot Ubuntu

    - by Matt Robertson
    I am running a dual-boot with Ubuntu (10.10) and Windows 7. Recently I edited my /boot/grub/grub.cfg file to only show one version of Ubuntu (as opposed to several kernel versions) and Windows, simply by commenting out all other menu entries. My question is if I can edit GRUB to just boot a specific entry automatically. I tried removing all other menu entries, but GRUB still showed the menu with only one entry. I've also considered just setting the timeout to either 0 or 1 second, as this would basically achieve the same thing. What is the best way to do this?

    Read the article

  • Different files on shared partition?

    - by Matt Robertson
    I am dual-booting Windows 8 and Ubuntu 12.04. My partition scheme looks like this: /dev/sda1 - Windows 8 (nfts) /dev/sda2 - Ubuntu / (ext4) /dev/sda3 - Ubuntu home (ext4) /dev/sda5 - swap /dev/sda6 - Shared data partition (exfat) (First off, yes I do have exfat libraries installed on Ubuntu) I created some PNG images in Windows and saved them on my shared partition. From Ubuntu, I edited the images in GIMP and saved them (replacing the ones on the shared partition). When I boot into Windows, the files appear unchanged - exactly like they did before I edited them from Ubuntu. I even added a folder and deleted some other files, but none of these changes exist in Windows. When I boot into Ubuntu, all of the changes are still there. It is as if Windows is caching the old file structure... How is this possible? Thanks in advance. Edit -- commands output ~~ lsblk NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sda 8:0 0 465.8G 0 disk +-sda1 8:1 0 165.1G 0 part +-sda2 8:2 0 21.3G 0 part / +-sda3 8:3 0 98.9G 0 part /home +-sda4 8:4 0 1K 0 part +-sda5 8:5 0 7.8G 0 part [SWAP] +-sda6 8:6 0 172.7G 0 part /mnt/shared_data ~~ /etc/fstab # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 # /dev/sda2 UUID=8f700f65-b5c7-4afc-a6fb-8f9271e0fb5e / ext4 errors=remount-ro 0 1 # /dev/sda3 UUID=f0d688b7-22bd-4fa7-bc1b-a594af2933fa /home ext4 defaults 0 2 # /dev/sda5 UUID=3bc2399b-5deb-4f04-924b-d4fc77491997 none swap sw 0 0 # /dev/sda6 UUID=F2DE-BC47 /mnt/shared_data exfat defaults 0 3 ~~ /etc/mtab /dev/sda2 / ext4 rw,errors=remount-ro 0 0 proc /proc proc rw,noexec,nosuid,nodev 0 0 sysfs /sys sysfs rw,noexec,nosuid,nodev 0 0 none /sys/fs/fuse/connections fusectl rw 0 0 none /sys/kernel/debug debugfs rw 0 0 none /sys/kernel/security securityfs rw 0 0 udev /dev devtmpfs rw,mode=0755 0 0 devpts /dev/pts devpts rw,noexec,nosuid,gid=5,mode=0620 0 0 tmpfs /run tmpfs rw,noexec,nosuid,size=10%,mode=0755 0 0 none /run/lock tmpfs rw,noexec,nosuid,nodev,size=5242880 0 0 none /run/shm tmpfs rw,nosuid,nodev 0 0 /dev/sda3 /home ext4 rw 0 0 /dev/sda6 /mnt/shared_data fuseblk rw,nosuid,nodev,allow_other,blksize=4096 0 0 binfmt_misc /proc/sys/fs/binfmt_misc binfmt_misc rw,noexec,nosuid,nodev 0 0 gvfs-fuse-daemon /home/matt/.gvfs fuse.gvfs-fuse-daemon rw,nosuid,nodev,user=matt 0 0

    Read the article

  • Pasting images into gmail from clipboard, shows fine when sent, but arrives as text

    - by John Robertson
    I have had consistent problems with pasting images into Gmail. I use Firefox (just in case that is relevant, but I wouldn't expect so). The image displays fine as I write it. But when it arrives at my family members Gmail account, it is being displayed in some base64 encoded form as many pages of text with a beginning like: img src="data:image/png;base64,iVBORw0KGgoAAA..... On the receiving end I cannot get the images to display properly.

    Read the article

  • Windows 7 can't see wireless printer

    - by Chance Robertson
    I have a P1102W printer from HP. I have a Windows 7 machine. I have a MacBook Pro. I setup the printer following the instructions from the Windows 7 machine. I am able to print from the Mac but not the Windows 7 machine. And to add, I am not able to print from any Windows 7 machines. The MacBook Pro address is 198.168.2.115, the Windows machine is 192.168.2.117, and the printer in 192.168.2.140. I can ping the printer from the Mac. I can ping the Windows 7 machine from the mac. I can ping the mac from the windows 7 machine. When I try to ping the printer from the Windows 7 machine I get destination unreachable. I can browse to the printer IP address from the mac and not the Windows 7. I have turned off the firewall on the Windows 7 machine and turned on network sharing. Is there something else I am missing. I can connect the printer with a USB cable to the Windows machine and print. I can not get the Windows machine to see the printer even though they are on the same network.

    Read the article

  • Why is iPhone mail much faster than Mail.app?

    - by Will Robertson
    It is noticeably faster to send and receive mail on my iPhone than on my MacBook, both through a Gmail IMAP account. (I'm still using Leopard, though.) I have a few rules set up in Mail, but it seems like the slowdown on the Mac is in the communication to Google's servers. Any explanations?

    Read the article

  • Hard Drive missing drive space

    - by Chance Robertson
    I have a 500 GB hard drive which I previously attached to my Mac. I detached the drive without going through the eject procedure. When I did this a message showed up, which of course I did not read. I could not use the drive until I formatted again. Now, when I attach the drive it says it is formatted NTFS and has 280.39 of 500 GB free. When I open the drive in Windows Explorer, Finder, or in Linux, is only shows a handful of files totaling 54 MB. How can I find out what is taking up all the space.

    Read the article

  • TeamCity GitHub Private Key Access Denied

    - by Chance Robertson
    Does anyone know of a tutorial for using TeamCity with github with ssh private keys. I have tried to set up git hub to connect and I either get a authentication error or get access denied. I am running TeamCity on Windows 2003. I am running the build agent as a custom account. I am running the web server under the administrator account. I have create a key for the custom account and administrator account. I now get an error that: The connection test failed: com.jcraft.jsch.JSchException: java.io.FileNotFoundException: C:\Documents and Settings\Administrator.ssh (Access is denied) If anyone has successfully set this up please help. I am going on 3 hours into this and want to get it solved. Thanks.

    Read the article

  • Queueing Effect.Parallels in Scriptaculous doesn't work

    - by Matthew Robertson
    Each block of animations, grouped in an Effect.Parallel, runs simultaneously. That works fine. Then, I want each of the Effect.Parallels to trigger sequentially, with a delay. The second block doesn't wait its turn. It fires when the function is run. Why?! ///// FIRST BLOCK ///// new Effect.Parallel([ new Effect.Morph... ], { queue: 'front' }); ///// SECOND BLOCK ///// new Effect.Parallel([ Element.toggleClassName($$('#add_comment_button .glyph').first(), 'yay') ], { sync: true, queue: 'end', delay: 1 }); ///// THIRD BLOCK ///// new Effect.Parallel([ new Effect.SlideUp... ], { queue: 'end', delay: 4 });

    Read the article

  • Odd tcp deadlock under windows

    - by John Robertson
    We are moving large amounts of data on a LAN and it has to happen very rapidly and reliably. Currently we use windows TCP as implemented in C++. Using large (synchronous) sends moves the data much faster than a bunch of smaller (synchronous) sends but will frequently deadlock for large gaps of time (.15 seconds) causing the overall transfer rate to plummet. This deadlock happens in very particular circumstances which makes me believe it should be preventable altogether. More importantly if we don't really know the cause we don't really know it won't happen some time with smaller sends anyway. Can anyone explain this deadlock? Deadlock description (OK, zombie-locked, it isn't dead, but for .15 or so seconds it stops, then starts again) The receiving side sends an ACK. The sending side sends a packet containing the end of a message (push flag is set) The call to socket.recv takes about .15 seconds(!) to return About the time the call returns an ACK is sent by the receiving side The the next packet from the sender is finally sent (why is it waiting? the tcp window is plenty big) The odd thing about (3) is that typically that call doesn't take much time at all and receives exactly the same amount of data. On a 2Ghz machine that's 300 million instructions worth of time. I am assuming the call doesn't (heaven forbid) wait for the received data to be acked before it returns, so the ack must be waiting for the call to return, or both must be delayed by something else. The problem NEVER happens when there is a second packet of data (part of the same message) arriving between 1 and 2. That part very clearly makes it sound like it has to do with the fact that windows TCP will not send back a no-data ACK until either a second packet arrives or a 200ms timer expires. However the delay is less than 200 ms (its more like 150 ms). The third unseemly character (and to my mind the real culprit) is (5). Send is definitely being called well before that .15 seconds is up, but the data NEVER hits the wire before that ack returns. That is the most bizarre part of this deadlock to me. Its not a tcp blockage because the TCP window is plenty big since we set SO_RCVBUF to something like 500*1460 (which is still under a meg). The data is coming in very fast (basically there is a loop spinning out data via send) so the buffer should fill almost immediately. According to msdn the buffer being full and at least one pending send should cause the data to be sent (though in another place it mentions that there various "heuristics" used in deciding when a send hits the wire). Anway, why the sender doesn't actually send more data during that .15 second pause is the most bizarre part to me. The information above was captured on the receiving side via wireshark (except of course the socket.recv return times which were logged in a text file). We tried changing the send buffer to zero and turning off Nagle on the sender (yes, I know Nagle is about not sending small packets - but we tried turning Nagle off in case that was part of the unstated "heuristics" affecting whether the message would be posted to the wire. Technically microsoft's Nagle is that a small packet isn't sent if the buffer is full and there is an outstanding ACK, so it seemed like a possibility).

    Read the article

  • Efficient counting of an association’s association

    - by Matthew Robertson
    In my app, when a User makes a Comment in a Post, Notifications are generated that marks that comment as unread. class Notification < ActiveRecord::Base belongs_to :user belongs_to :post belongs_to :comment class User < ActiveRecord::Base has_many :notifications class Post < ActiveRecord::Base has_many :notifications I’m making an index page that lists all the posts for a user and the notification count for each post for just that user. # posts controller @posts = Post.where( :user_id => current_user.id ) .includes(:notifications) # posts view @posts.each do |post| <%= post.notifications.count %> This doesn’t work because it counts notifications for all users. What’s an efficient way to do this without running a separate query for each post?

    Read the article

1 2  | Next Page >