Search Results

Search found 194 results on 8 pages for 'c 1x'.

Page 1/8 | 1 2 3 4 5 6 7 8  | Next Page >

  • Switches with 802.1x "supplicant timeout" feature?

    - by chris
    I'm looking for a complete list of switches which will allow 802.1x and normal (non-supplicant) enabled hosts to connect to the same ports on a switch. This is useful for areas where there are semi-open ports such as a lobby area or a library where corporate and guest users may use the same ports but you want them to have different access profiles and where it isn't expected that guests would have 802.1x configured on their system. For instance, Enterasys and Extreme Networks both have a feature where if the switch doesn't see an EAPOL packet from the client in a certain amount of time, it puts the port into a "guest" VLAN; if it sees an 802.1x supplicant, it tries to authenticate the user via 802.1x and if they succeed, it does what the radius server tells it to do with that port (IE put the port into a certain VLAN, apply certain ACLs, etc) Do other vendors have this sort of feature, or is it expected that a switch will do both 802.1x and MAC authentication, and the "supplicant timeout" feature is implemented with a blanket allow on the MAC authentication?

    Read the article

  • PXE in an 802.1X environment

    - by newmanth
    My organization is about to implement 802.1X on our enterprise, but we currently use PXE-based OS deployment sequences in SCCM. I'm looking for a way to continue using PXE in an 802.1X environment. Our infrastructure uses Cisco network gear running at 12.2 (or newer). We are an all Windows network and all clients support 802.1X. All new workstations have Intel AMT available (but not factory configured). In a worst case scenario, we'll use a guest vlan for OSD, but I'd rather have the OSD occur in an authenticated session. I've seen white papers that describe using AMT to act as a supplicant for PXE boot, but can't find any implementation details...

    Read the article

  • mysql replication 1x master, 1x slave

    - by clarkk
    I have just setup one master and one slave server, but its not working.. On my website I connect to the slave server and I insert some rows, but they do not appear on the master and vice versa.. What is wrong? This is what I did: Master: -> /etc/mysql/my.cnf [mysqld] log-bin = mysql-master-bin server-id=1 # bind-address = 127.0.0.1 binlog-do-db = test_db Slave: -> /etc/mysql/my.cnf [mysqld] log-bin = mysql-slave-bin server-id=2 # bind-address = 127.0.0.1 replicate-do-db = test_db Slave: terminal 0 > mysql> STOP SLAVE; // and drop tables Master: terminal 1 > mysql> CREATE USER 'repl_slave'@'slave_ip' IDENTIFIED BY 'repl_pass'; mysql> GRANT REPLICATION SLAVE ON *.* TO 'repl_slave'@'slave_ip'; mysql> FLUSH PRIVILEGES; mysql> FLUSH TABLES WITH READ LOCK; -- leave terminal open terminal 2 > shell> mysqldump -u root -pPASSWORD test_db --lock-all-tables > dump.sql mysql> SHOW MASTER STATUS; Slave: terminal 3 > shell> mysql -u root -pPASSWORD test_db < dump.sql terminal 0 > mysql> CHANGE MASTER TO mysql> MASTER_HOST='master_ip', mysql> MASTER_USER='repl_slave', mysql> MASTER_PASSWORD='repl_pass', mysql> MASTER_PORT=3306, mysql> MASTER_LOG_FILE='mysql-master-bin.000003', // terminal 2 > SHOW MASTER STATUS mysql> MASTER_LOG_POS=4, // terminal 2 > SHOW MASTER STATUS mysql> MASTER_CONNECT_RETRY=10; mysql> START SLAVE; mysql> SHOW SLAVE STATUS; Here is the slave status: Array ( [Slave_IO_State] => Waiting for master to send event [Master_Host] => xx.xx.xx.xx [Master_User] => repl_slave [Master_Port] => 3306 [Connect_Retry] => 10 [Master_Log_File] => mysql-master-bin.000003 [Read_Master_Log_Pos] => 106 [Relay_Log_File] => mysqld-relay-bin.000002 [Relay_Log_Pos] => 258 [Relay_Master_Log_File] => mysql-master-bin.000003 [Slave_IO_Running] => Yes [Slave_SQL_Running] => Yes [Replicate_Do_DB] => test_db [Replicate_Ignore_DB] => [Replicate_Do_Table] => [Replicate_Ignore_Table] => [Replicate_Wild_Do_Table] => [Replicate_Wild_Ignore_Table] => [Last_Errno] => 0 [Last_Error] => [Skip_Counter] => 0 [Exec_Master_Log_Pos] => 106 [Relay_Log_Space] => 414 [Until_Condition] => None [Until_Log_File] => [Until_Log_Pos] => 0 [Master_SSL_Allowed] => No [Master_SSL_CA_File] => [Master_SSL_CA_Path] => [Master_SSL_Cert] => [Master_SSL_Cipher] => [Master_SSL_Key] => [Seconds_Behind_Master] => 0 [Master_SSL_Verify_Server_Cert] => No [Last_IO_Errno] => 0 [Last_IO_Error] => [Last_SQL_Errno] => 0 [Last_SQL_Error] => )

    Read the article

  • Windows 7 / Windows Vista won't connect to 802.1x RADIUS Server

    - by Calvin Froedge
    I've deployed Radius and have no problems connecting with TTLS, PEAP, or MD5 using linux, mac, and windows xp. For Windows 7 and Vista, I'm never prompted with the dialog box to enter username & password after configuring 802.1x support on the client. Steps taken: Enabled Wired Autoconfig in services.msc Set to use PEAP Set to require user authentication When I enable the network connection it says "Trying to authenticate" then fails with no error log / message given. The radius server gives no indication that there was ever a request (no Access-Reject - the client simply never tries to authenticate). On the windows 7 client, I can see that the DHCP server does not assign an IP to the client when 802.1x is enabled on the client (though it does when it isn't). How can I debug this further? Has anyone else run into a similar situation? My radius server is freeradius on Ubuntu 11.10.

    Read the article

  • Vista Enterprise doesn't find logon servers in a network with 802.1x authentication

    - by jneves
    In a network with 802.1x configuration and a samba server configured in the domain, I have a radius server that delegates the authentication against the samba domain for users (using LDAP). The radius defines which VLAN the user is supposed to have access. I'm trying to put a Windows Vista Enterprise in the same network, but it attempts to logon the domain before authenticating against the network in 802.1x and it doesn't find any logon servers. In the radius logs I see the machine trying to authenticate with 'host/'. Does Vista enterprise require that I put it in a network with access to the logon server at that point? Thanks in advance, João Miguel Neves

    Read the article

  • Setting up 802.1X wireless connection on OSX

    - by hizki
    I am an OSX user, I have Snow Leopard 10.6.5 and an updated AirPort (version 5.5.2). I am trying to connect to my university's wireless network, but it has a 802.1x security that I am having trouble defining... Here there are instructions for connecting with Windows XP, Windows 7 and Linux. Can someone please instruct me what should I do to set up this network on my Mac? I have had previous success in setting up this network, but I have no idea what I did that made it work. Since I updated my AirPort (to version 5.5.2) it worked only seldomly and very slowly... Before the update, even when it worked it never remembered my password. Update: I have already tried to create a new "location", removed all the 802.1x user profiles and all the remembered networks, and made sure the in the TCP/IP tab 'Configure IPv4' is set to "Using DHCP". I also moved /Library/Preferences/SystemConfiguration/preferences.plist to my desktop in attempt to force the system to create a new set of settings. Still I can define the connection to work.

    Read the article

  • Setting up 802.1X wireless connection on OSX

    - by hizki
    I am an OSX user, I have Snow Leopard 10.6.5 and an updated AirPort. I am trying to connect to my university's wireless network, but it has a complex security that I am having trouble defining... Here there are instructions for connecting with Windows XP, Windows 7 and Linux. Can someone please instruct me what should I do to set up this network on my MAC? Thank you. P.S. I have had previous success in setting up this network, but I have no idea what I did that made it work. Since I updated my AirPort it worked only seldomly and very slowly... Before the update, even when it worked it never remembered my password.

    Read the article

  • what 802.1x key_mgmt/eap does wired network normally uses?

    - by tuma
    I'm really new to 802.1x but I'm trying to use 802.1x authentication in a wired network. My desktop is Linux (centos) using wpa_supplicant as the supplicant. I'm wondering what key_mgmt/eap is normally used in the wired environment? I went through http://en.wikipedia.org/wiki/Extensible_Authentication_Protocol but it doesn't clearly say which method/encapsulation is normally used for wired network. Can anyone give me a hint? Thanks.

    Read the article

  • Can Linux works as 802.1X authenticator in bridge mode ?

    - by Kartoch
    I want to create a lab for my students with netkit (a network emulator based on 802.1X) to study 802.1X. I can create the authentication server (FreeRadius) and configure the client with XSupplicant connected by a switch (a Linux in bridge mode). I'm looking to a way to configure the switch as Authenticator, i.e.: when the client is connected, the switch only forwards EAP packets to the authentication server. then the switch lets the user access to the local network when the authentication server authorizes the client. At the present time there is a lot of documentation to do this with a wireless point but no one for a switch. Does anyone have an idea or know the good software for it ?

    Read the article

  • How to change 802.1x settings for Wireless in Windows XP SP3?

    - by mspoerr
    Hello, I want to configure EAP-TLS with Machine Authentication ONLY for a wireless network. The supplicant is the bulit-in supplicant in Windows XP SP3. I found the following document: http://support.microsoft.com/kb/929847 - How to enable computer-only authentication for a 802.1X-based network in Windows Vista, in Windows Server 2008, and in Windows XP Service Pack 3 But unforunately the needed command "netsh wlan" is not available in Windows XP - "Note Windows XP SP3 and earlier versions of Windows XP do not support the netsh wlan command." How can I change the settings without the "netsh wlan" command? Thanks, mspoerr

    Read the article

  • Can a device (WAP or switch) be configured as an 802.1x supplicant?

    - by Allan Ross
    We are looking at implementing 802.1x on a wired/wireless network. What I am looking for is a device that can act as a supplicant and once authenticated on the network, is able to pass traffic from any downstream connected device. The point of doing this would be to allow a properly pre-configured device to be provided to a client user who could then connect any device on the downstream side of the device. We will be able to manage the aggregate traffic on the device without concern for what is connected on the far side. Am I dreaming; does every device out there support this and I just don't know it or is reality fall somewhere in the middle?

    Read the article

  • Ethernet 802.1x client -> WiFi AP on a Raspberry Pi?

    - by Martin Janiczek
    I have an Ethernet connection that requires 802.1x authentication (TTLS, MSCHAPv2, name+password). My goal is to connect that to something that would then act as an WiFi AP, so I can use the connection on more devices (iPhone, notebook, etc.) Would it be possible/good idea to use Raspberry Pi for this purpose? Or are there better-suited devices to do this? EDIT: found some alternatives but because of low rep can't post more than two links... OpenWRT + wpa_supplicant guide Carambola - works with OpenWRT (but probably not standalone?) Hornet-UB - works with OpenWRT Asus RT-N10+ + OpenWRT how-to EDIT 2: probably going to try TP-LINK TL-WR740N. It's a classic router, but can be flashed with OpenWRT, and the price beats everything else I've seen.

    Read the article

  • Ethernet 802.1x client -> WiFi AP on a Raspberry Pi?

    - by Martin Janiczek
    I have an Ethernet connection that requires 802.1x authentication (TTLS, MSCHAPv2, name+password). My goal is to connect that to something that would then act as an WiFi AP, so I can use the connection on more devices (iPhone, notebook, etc.) Would it be possible/good idea to use Raspberry Pi for this purpose? Or are there better-suited devices to do this? EDIT: found some alternatives but because of low rep can't post more than two links... OpenWRT + wpa_supplicant guide Carambola - works with OpenWRT (but probably not standalone?) Hornet-UB - works with OpenWRT Asus RT-N10+ + OpenWRT how-to

    Read the article

  • Modem with support for wired 802.1x

    - by menko
    I'm looking at allowing internet access for only a few scattered users on a school network. One method I'm considering is using 802.1x authentication for the modem. Of course there are simpler options like only allowing specific IP or mac addresses, but policy requires something more secure than this. So, are there any modems with 802.1x wired authentication? All my searching on this yields info about wireless.

    Read the article

  • Will C++1x support __stdcall or extern "C" capture-nothing lambdas?

    - by Daniel Trebbien
    Yesterday I was thinking about whether it would be possible to use the convenience of C++1x lambda functions to write callbacks for Windows API functions. For example, what if I wanted to use a lambda as an EnumChildProc with EnumChildWindows? Something like: EnumChildWindows(hTrayWnd, CALLBACK [](HWND hWnd, LPARAM lParam) { // ... return static_cast<BOOL>(TRUE); // continue enumerating }, reinterpret_cast<LPARAM>(&myData)); Another use would be to write extern "C" callbacks for C routines. E.g.: my_class *pRes = static_cast<my_class*>(bsearch(&key, myClassObjectsArr, myClassObjectsArr_size, sizeof(my_class), extern "C" [](const void *pV1, const void *pV2) { const my_class& o1 = *static_cast<const my_class*>(pV1); const my_class& o2 = *static_cast<const my_class*>(pV2); int res; // ... return res; })); Is this possible?

    Read the article

  • Single Sign On 802.1x Wireless - saying “Connecting to <SSID>”, hangs for 10 seconds, fails with “Unable to connect to <SSID>, Logging on…”.

    - by Phaedrus
    We are implementing WiFi on Windows 7 machines in our corporate environment. Machines should be able to log into the domain by WiFi as the Machine (Pre-Logon), and as the User (Post-Logon). We have everything working correctly except for 2 things: 1) Sometimes the login scripts don't run 2) The user VLAN is sometimes different than the machine vlan, and no DHCP renew occurs after user logon. I am clear that both these problems should be fixable by using the "Single Sign On" Option under the 802.1x Wireless Vista GPO, and setting the wireless to connect immediately before user logon and also by enabling "This network uses different VLAN for authentication with machine and user credentials" If I enable these GPO settings in a lab, the computer does authenticate & gets WIFI before the user logs on, so when the login box is displayed, it says “Windows will try to connect to ”, even though it is already connected (which should be ok?). Enter the user credentials and it goes to a screen saying “Connecting to ”, hangs for 10 seconds, fails with “Unable to connect to , Logging on…”. Desktop fires up and then the user re-authenticates with no problem as himself instead of the machine, but by that point, we defeat the point of the WiFi SSO “before user logon”. Also by that point, no DHCP renew seems to occur, and the user is still stuck with the wrong IP address for the new VLAN. When the “Connecting to ” screen comes up, there’s no indication on the AP or the Radius server that anything whatsoever is happening after credentials are entered until after the domain logon. Also with this policy enabled, sometimes windows hangs on a black screen indefinitely until I disable the Wireless NIC, so something is knackered for sure. What have I missed? Suggestions are much appreciated... /P

    Read the article

  • API to set credentials for wired 802.1X in Windows

    - by crimsonbloat
    Hello, Is there any API to set user credentials programmatically for a wired 802.1X profile in Windows Vista/XP SP3 ? The corresponding API for wireless is WlanSetProfileEapXmlUserData (...) or WlanSetProfileEapUserData (...). Can the same functionality be achieved for a wired 802.1X profile is some way ? Thanks, crimsonbloat.

    Read the article

  • How to integrate Windows Server 2008 R2's NPS with Cisco switches?

    - by Massimo
    I need to evaluate in a lab environment the use of Windows Server 2008 R2's NPS for 802.1x authentication with Cisco Catalyst 3750 switches; the general idea is to only let clients connect to the company network if they can provide valid domain logon credentials, placing them in a restricted VLAN instead if they can't. NAP would also be a bonus, but it can be evaluated later; the main point now is only 802.1x authentication. Although I have very good knowledge of Windows and Active Directory (on the Microsoft side) and quite good knowledge of Catalyst switches (on the Cisco side), I'm totally new to 802.1x; I'd really like some general guidelines and help here, and some sort of implementation guide would also be very useful.

    Read the article

  • What kind of language will replace C++ as C++ replaced C ? [closed]

    - by jokoon
    I think I'm not totally wrong when thinking that C++0x (or C++1x) is still C++, just better, with functionnalities coming from boost. I can't stop thinking that computer sciences, even with all that has been made so far, have to evolve again. I don't really like D since it just try to be some sort of "what C++ should have been", and Go seems to be too sophisticated when I dig a little into it, especially after watching some presentation video like this one http://www.youtube.com/watch?v=rKnDgT73v8s The first thing that come into my mind is a new kind of syntax to directly handle specific datatypes and containers such as map, vectors, queues... What kind of things are researchers thinking about ? What are the real features that could make C++ better or a new C-like language could invent ? Does Go features such things ? Would there be a new kind of syntax that would "unbloat" C++ while keeping its advantages ? Could C++ have some of the interesting stuff of languages such as C# and ObjC ? EDIT: Please consider that I'm talking about a system language, not a VM/CLI/bytecode thing.

    Read the article

1 2 3 4 5 6 7 8  | Next Page >