Search Results

Search found 25 results on 1 pages for 'chow'.

Page 1/1 | 1 

• Software requirements specification, please help!

  - by Nicholas Chow

  For a school project, I had to create a SRS for a "fictional" application. However they did not show us what it exactly entails, and were very vague with explanations. The SRS asked of us has to have at least 5 functional requirements, 5 non functional requirements and 1 constraint. Now I have tried my best to make one however I think there are still a lot of mistakes in it. Could you all please look at it and provide me with some feedback on which parts I can improve or just tell me which parts are plain out wrong and how to make it better? (The project has a maximum of 12 pages so it is a bit long, I will post it below. FR1 Registration of Organizer FR1 describes the registration of an Organizer on CrowdFundum FR1.1 The system shall display a registration form on the website. FR1.2 The system shall require a Name, Username, Document number passport/ID card, Address, Zip code, City, Email address, Telephone number, Bank account, Captcha code on the registration form when a user registers.

  Read the article

• Functional/nonfunctional requirements VS design ideas

  - by Nicholas Chow

  Problem domain Functional requirements defines what a system does. Non-Functional requirements defines quality attributes of what the system does as a whole.(performance, security, reliability, volume, useability, etc.) Constraints limits the design space, they restrict designers to certain types of solutions. Solution domain Design ideas , defines how the system does it. For example a stakeholder need might be we want to increase our sales, therefore we must improve the usability of our webshop so more customers will purchase, a requirement can be written for this. (problem domain) Design takes this further into the solution domain by saying "therefore we want to offer credit card payments in addition to the current prepayment option". My problem is that the transition phase from requirement to design seems really vague, therefore when writing requirements I am often confused whether or not I incorporated design ideas in my requirements, that would make my requirement wrong. Another problem is that I often write functional requirements as what a system does, and then I also specify in what timeframe it must be done. But is this correct? Is it then a still a functional requirement or a non functional one? Is it better to seperate it into two distinct requirements? Here are a few requirements I wrote: FR1 Registration of Organizer FR1 describes the registration of an Organizer on CrowdFundum FR1.1 The system shall display a registration form on the website. FR1.2 The system shall require a Name, Username, Document number passport/ID card, Address, Zip code, City, Email address, Telephone number, Bank account, Captcha code on the registration form when a user registers. FR1.4 The system shall display an error message containing: “Registration could not be completed” to the subscriber within 1 seconds after the system check of the registration form was unsuccessful. FR1.5 The system shall send a verification email containing a verification link to the subscriber within 30 seconds after the system check of the registration form was successful. FR1.6 The system shall add the newly registered Organizer to the user base within 5 seconds after the verification link was accessed. FR2 Organizer submits a Project FR2 describes the submission of a Project by an Organizer on CrowdFundum - FR2 The system shall display a submit Project form to the Organizer accounts on the website.< - FR2.3 The system shall check for completeness the Name of the Project, 1-3 Photo’s, Keywords of the Project, Punch line, Minimum and maximum amount of people, Funding threshold, One or more reward tiers, Schedule of when what will be organized, Budget plan, 300-800 Words of additional information about the Project, Contact details within 1 secondin after an Organizer submits the submit Project form. - FR2.8 The system shall add to the homepage in the new Projects category the Project link within 30 seconds after the system made a Project webpage - FR2.9 The system shall include in the Project link for the homepage : Name of the Project, 1 Photo, Punch line within 30 seconds after the system made a Project webpage. Questions: FR 1.1 : Have I incorporated a design idea here, would " the system shall have a registration form" be a better functional requirement? F1.2 ,2.3 : Is this not singular? Would the conditions be better written for each its own separate requirement FR 1.4: Is this a design idea? Is this a correct functional requirement or have I incorporated non functional(performance) in it? Would it be better if I written it like this: FR1 The system shall display an error message when check is unsuccessful. NFR: The system will respond to unsuccesful registration form checks within 1 seconds. Same question with FR 2.8 and 2.9. FR2.3: The system shall check for "completeness", is completeness here used ambigiously? Should I rephrase it? FR1.2: I added that the system shall require a "Captcha code" is this a functional requirement or does it belong to the "security aspect" of a non functional requirement. I am eagerly waiting for your response. Thanks!

  Read the article

• What should one keep in mind when switching from traditional to RESTful routing in Rails?

  - by Brian Holder-Chow

  What should one keep in mind when switching from traditional to RESTful routing in Rails? From a typical Rails routes.rb file: # This is a legacy wild controller route that's not recommended for RESTful applications. # Note: This route will make all actions in every controller accessible via GET requests. match ':controller(/:action(/:id))(.:format)' As switching away from this means that I will have to create routes for each controller individually, does anyone have any advice on the best way to migrate this safely?

  Read the article

• Functional vs. Non-Functional Requirements vs Design ideas in an SRS

  - by Nicholas Chow

  For a school project, I had to create a SRS for a "fictional" application. However they did not show us what it exactly entails, and were very vague with explanations. The SRS asked of us has to have at least 5 functional requirements, 5 non functional requirements and 1 constraint. Now I have tried my best to make one however I there are still some uncertainties left, I hope you experts can tell me whether or not I am thinking in the right direction. I will keep on updating this posts as I have questions regarding requirements that are vague to me, thank you all in advance for making SRS more clear for me FR1 Registration of Organizer FR1 describes the registration of an Organizer on CrowdFundum FR1.1 The system shall display a registration form on the website. FR1.2 The system shall require a Name, Username, Document number passport/ID card, Address, Zip code, City, Email address, Telephone number, Bank account, Captcha code on the registration form when a user registers. FR1.3 The system shall check whether the Name, Username, Document number passport/ID card, Address, Zip code, City, Email address, Telephone number, Bank account, Captcha code are filled out correctly within 1 seconds after a user submits the registration form. FR1.4 The system shall display an error message containing: “Registration could not be completed” to the subscriber within 1 seconds after the system check of the registration form was unsuccessful. FR1.5 The system shall send a verification email containing a verification link to the subscriber within 30 seconds after the system check of the registration form was successful. FR1.6 The system shall add the newly registered Organizer to the user base within 5 seconds after the verification link was accessed. Questions: FR1.1 Is this a functional requirement, or have I incorporated design idea in it by using "shall display on website". If so what would be a better way to write it? FR1.2 Is this better written in one requirement, or should I write each condition as a seperate requirement? FR1.3-1.5 Are these functional requirements or did I mix some non functional elements in it? How is it better phrased? FR1.3-1.6 Are these all correct functional requirements? As in free of ambiguity, complete, implementation free etc.

  Read the article

• AIIM Best Practice Awards to Two Oracle Customers

  - by [email protected]

  On Tuesday night at the AIIM Awards Banquet, two Oracle customers and their implementation partners won awards for their Oracle Enterprise 2.0 implementations. The Bureau of Indian Affairs, a division of the Department of Interior, won a Carl E. Nelson Best Practices Award for their implementation of Oracle WebCenter and Oracle Content Management to provide an interactive social media environment to engage and inform their constituent communities. The BIA Citizen Portal provides all the services of the Bureau of Indian Affairs to the community of 564 federally recognized tribes that include over 1.9 million American Indians and Alaska Natives. This integration was achieved with the support of Oracle partner Mythics. The Charles Town Police Department integrated Oracle Content Management to integrate with and support their police evidence system. This integration was created in partnership with Oracle partner EDAC Systems Inc. Diane Hoppe of EDAC Systems Inc. was on hand to receive the award for Charles Town Police Department. You can see pictures of our award winners here: Linus Chow, Oracle; John Mancini, President of AIIM; and Diane Hoppe, EDACS - Charles Town Police: John Mancini, President of AIIM; Linus Chow, Oracle; Chris Baker, Mythics; and Bureau of Indian Affairs Oracle, EDACS, Mythics, BIA You can read more in the AIIM press release.

  Read the article

• Layout problem: how to place something on top and bottom?

  - by chow

  I want create a layout, with a horizontal LinearLayout(s) on top and bottom, a ListView fill in middle. How can I define the main.xml. I tried to create a layout with horizontal LinearLayout on top, TextView on bottom, a ListView fill in middle; is ok. But after I modified the bottom TextView to LinearLayout, the bottom LinearLayout disappear. <?xml version="1.0" encoding="utf-8"?> <LinearLayout xmlns:android="http://schemas.android.com/apk/res/android" android:orientation="vertical" android:layout_width="fill_parent" android:layout_height="fill_parent" > <LinearLayout xmlns:android="http://schemas.android.com/apk/res/android" android:layout_width="fill_parent" android:layout_height="wrap_content" android:orientation="horizontal" > <TextView android:textSize="12px" android:text="something here" android:layout_width="50px" android:layout_height="wrap_content" /> <TextView android:textSize="12px" android:text="something here" android:layout_width="fill_parent" android:layout_height="wrap_content" /> </LinearLayout> <LinearLayout android:orientation="vertical" android:layout_width="fill_parent" android:layout_height="fill_parent" android:gravity="bottom" > <ListView android:id="@+id/listbody" android:layout_width="fill_parent" android:layout_height="wrap_content" /> <LinearLayout android:orientation="horizontal" android:layout_height="wrap_content" android:layout_width="fill_parent" > <TextView android:layout_height="wrap_content" android:layout_width="0dip" android:layout_weight="1" android:textSize="12px" android:text="50%" /> <TextView android:layout_height="wrap_content" android:layout_width="0dip" android:layout_weight="1" android:textSize="12px" android:text="50%" /> </LinearLayout> </LinearLayout> </LinearLayout> Anybody can tell advise? Please help.

  Read the article

• Is there an extension or mode in Emacs similar to surround.vim?

  - by Chow

  Surround.vim is a nifty vim extension that allows you to surround blocks of text with , brackets, braces, and pretty much any arbitrary "surround" character. It supports paragraph and word surround, but I frequently use it in visual mode. I'm playing around with Emacs and wondering if there's something similar; something that will let me highlight a region and then have the marked region (or rectangle) enclosed with braces, brackets or tags.

  Read the article

• Find rows that match multiple (two) criteria

  - by Scott Sanders

  I am trying to get a list of items that match on two criteria. DATE PRODUCT CHANNEL DEC 13 Cat Chow DRUG NOV 13 Pupperoni DRUG DEC 13 Meow Mix DRUG DEC 13 Jerky Treats DRUG This is the data from A1 to C5. I want all the product sold on DEC 13 and in the DRUG channel. This is the formula that I have now, which is only bringing back the first example. INDEX($B$2:$B$5, MATCH(1, ("DRUG"=$C$2:$C$5)*("DEC 13"=$A$2:$A$5), 0) )

  Read the article

• Add Properties Back to the Context Menu in Firefox

  - by Asian Angel

  Have you noticed that the Properties Command has been removed from the Context Menu in Firefox 3.6? If you have been missing it here is how to get it back. Before With the newest version of Firefox you may have noticed a very useful command missing from the “Context Menu”. Here you can see that when we right clicked on the article link we were unable to “access” the properties for it… Same article and the same problem when trying to “access” the properties for one of the images. After Once you have installed the extension you can once again “access” the properties for those links… And those images… Looking very good… Conclusion If you have been frustrated with the removal of the “Properties Command” from the “Context Menu” in Firefox 3.6, you can now add it back in just a few moments. Links Download the Element Properties extension (Mozilla Add-ons) Similar Articles Productive Geek Tips Prevent Annoying Websites From Messing With the Right-Click Menu in FirefoxAccess Your Bookmarks in the Context Menu with Context BookmarksAdd Print & Print Preview Commands to Firefox’s Context MenuRestore the "Search…" Item to the Folder Context Menu in Windows Vista SP1Create Permanent Tabs in Firefox with PermaTabs Mod TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional The Ultimate Excel Cheatsheet Convert the Quick Launch Bar into a Super Application Launcher Automate Tasks in Linux with Crontab Discover New Bundled Feeds in Google Reader Play Music in Chrome by Simply Dragging a File 15 Great Illustrations by Chow Hon Lam

  Read the article

• Announcing Release of Oracle Solaris Cluster 4.1!

  - by user9159196

  Oct 26, 2012We are very happy to announce the release of  Oracle Solaris Cluster 4.1, providing High Availability (HA) and  Disaster Recovery (DR) capabilities for Oracle Solaris 11.1.  This is yet another proof of Oracle's continued investment in Oracle Solaris technologies such as Oracle Solaris Cluster. For this new release we have improved the Solaris Cluster integration within the Oracle environment. For example  we've created new agents such as PeopleSoft JobScheduler or added the support of the Oracle ZFS Storage Appliance replication in the Geo Edition module (to facilitate disaster recovery in multi-site configuration equipped with those types of storage.) We have also extended the Oracle Solaris Zone Cluster feature with support of Oracle Solaris 10 zone clusters and exclusive-IP to facilitate deployment of virtualized or cloud architecture.And there are many more new features to discover in this release. Stay tuned for more specific articles. In the mean time check out the What's new document or even better, download the latest version from  here.Also, join the Oracle Solaris 11 Online Event on November 7 where an entire session will be devoted to discussing Oracle Solaris Cluster 4.1. Our Oracle Solaris Cluster engineers will be on hand to respond to your questions. We look forward to your feedback and inputs! -Nancy Chow and Eve Kleinknecht 

  Read the article

• Disable YouTube Comments while using Chrome

  - by Asian Angel

  Are you tired of the comments at YouTube being full of profanity or irritating to look at? Now you can watch videos minus the comments with the No YouTube Comments extension for Google Chrome. Before Sometimes reading through the comments at YouTube can be interesting or even fun but at other times they can be a bother to you. It all depends on the contents of the comments (i.e. lots of profanity) and what you would like to have visible while watching videos. After Once you have installed the extension all that you will need to do is refresh the page (if you were already watching a video). As you can see any and all signs of the comments section is gone. All nice and clean now… Conclusion If you love to check out your favorite videos on YouTube but are annoyed by the multitude of meaningless and profane comments, this extension for Chrome gets the job done. Links Download the No YouTube Comments extension (Google Chrome Extensions) Similar Articles Productive Geek Tips Remove Unsuitable Comments from YouTubeImprove YouTube Video Viewing in Google ChromeGain Access to a Search Box in Google ChromeQuick Tip: Disable Favicons in FirefoxDisable Favorite Links Panel in Windows Vista Explorer TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Convert the Quick Launch Bar into a Super Application Launcher Automate Tasks in Linux with Crontab Discover New Bundled Feeds in Google Reader Play Music in Chrome by Simply Dragging a File 15 Great Illustrations by Chow Hon Lam Easily Sync Files & Folders with Friends & Family

  Read the article

• Upcoming SOA BPM PS6 Workshops

  - by BPMWarrior

  Are you interested in learning about all of the new great features in SOA BPM PS6? There is a lot of excitement around the new WebForms, Process Player, Simulation and the new features in the BPM Composer.  During FY14 Q1 and Q2 there will be a number of SOA BPM Workshops available. Space is limited. Upcoming SOA BPM Workshop Schedule:   Ø July 15th – PS6 Roadshow w/Mythics in Sacramento Ø July 18th – PS6 Workshop for Sandia Labs Ø July 23rd - PS6 Workshop in Reston Ø Aug 5th & 6th – PS6 Workshop for Deloitte in Reston Ø Aug 13th – PS6 Workshop in Reston for PS SC’s & Specialists Ø Aug 20th - 21st – PS6 Roadshow in NYC and Albany, NY        August – PS6 Workshop for Booz Allen Hamilton – date to be confirmed     August – PS6 Workshop in Dallas/Austin – dates to be confirmed      Sept 17th - SOA BPM Overview Workshop for Executives in Ottawa     Sept 18th – PS6 Workshop in Ottawa     Oct 23rd – PS6 Workshop in Denver         For more information contact:               [email protected] or [email protected]  g  

  Read the article

• Access Your favorite RSS Feeds in Windows Media Center

  - by Mysticgeek

  There are a lot of apps out there that help you organize and view your favorite RSS feeds. If you subscribe to a lot, sitting at a computer to view them all can be overwhelming. Today we take a look at accessing them from the couch with WMC. Using Media Center RSS Feeds To get RSS feeds to work with this plugin you need to subscribe to them through Internet Explorer.   The first thing you’ll need to do is activate Media Center RSS Reader (link below) on their site. Next install the Media Center RSS Reader plugin (link below). Installation is easy, just select the defaults when going through the wizard. Now when you open Media Center you’ll see the RSS icon in the main menu under Accessories. You can also find it in the Extras section. Enter in the username and activation code you received when you activated the plugin earlier. After activation you’ll see a list of the RSS feeds you currently subscribed through Internet Explorer. Click on the site feed you want to read and you’ll get a list of the different items available. Next you get and overview of the contents for the item you selected. From there you can show the page of the website containing that item. For any audio or video feeds you subscribe to, at the overview screen, click on Play to watch it. Then just sit back and watch your favorite video RSS feeds on WMC.   Media Center RSS Reader plugin will work with Vista and Windows 7. If you’re looking for a way to check out your RSS feeds in WMC this is a cool plugin for it. Download Media Center RSS Reader –You can activate it here as well. Similar Articles Productive Geek Tips Using Netflix Watchnow in Windows Vista Media Center (Gmedia)Integrate Boxee with Media Center in Windows 7Integrate Hulu Desktop and Windows Media Center in Windows 7Add Color Coding to Windows 7 Media Center Program GuideSchedule Updates for Windows Media Center TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional 15 Great Illustrations by Chow Hon Lam Easily Sync Files & Folders with Friends & Family Amazon Free Kindle for PC Download Stretch popurls.com with a Stylish Script (Firefox) OldTvShows.org – Find episodes of Hitchcock, Soaps, Game Shows and more Download Microsoft Office Help tab

  Read the article

• Choose the Text Editor Used to View Source Code in Internet Explorer

  - by Asian Angel

  Everyone has a favorite text editor that they like to use when viewing or working with source code. If you are unhappy with the default choice in Internet Explorer 8 then join us as we show you how to set up access to your favorite text editor. A Look at Before Here is Internet Explorer on our test system ready to help us view the source code for one of the pages here at the site. Perhaps “Notepad” is your default source code viewer… Or in the case of our test system where “EditPad Lite” was the default due to choices we made while installing it. Choose Your Favorite Text Editor Chances are you have your own personal favorite and want to make it the default source code viewer. To get started go to the “Tools Menu”  and click on “Developer Tools” or press “F12” to access the “Developer Tools Window”. Once you have the “Developer Tools Window” open go to the “File Menu”, then “Customize Internet Explorer View Source”, and click on “Other”. Once you have clicked on “Other” you will see the “Program Directory” for the current default app. Here you can see the “Program Files Folder” for “EditPad Lite”. To change the default app simply browse for the appropriate program folder. On our test system we decided to change the default to “Editra”. Once you have located the program that you want to use click on the “.exe” file for that app and click “Open”. Once you have clicked “Open”, all that is left for you to do is close the “Developer Tools Window”…everything else is already taken care of. And just like that you can be viewing source code with your favorite text editor. Conclusion If you have been unhappy with the default source code viewer in Internet Explorer 8 then you can set up access to your favorite text editor in just a couple of minutes. Nice, quick, and easy the way it ought to be. Thanks to HTG & TinyHacker reader Dwight for the tip! Similar Articles Productive Geek Tips View Webpage Source Code in Your Favorite Text Editor – FirefoxView Webpage Source Code in Tabs in FirefoxEasily View Source of Included Files in FirefoxRemove ISP Text or Corporate Branding from Internet Explorer Title BarRemove PartyPoker (Or Other Items) from the Internet Explorer Tools Menu TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Automate Tasks in Linux with Crontab Discover New Bundled Feeds in Google Reader Play Music in Chrome by Simply Dragging a File 15 Great Illustrations by Chow Hon Lam Easily Sync Files & Folders with Friends & Family Amazon Free Kindle for PC Download

  Read the article

• Choose Custom New Tab Pages in Chrome

  - by Asian Angel

  For most people the default New Tab Page in Chrome works perfectly well for their purposes. But if you would prefer to choose what opens in a new tab for yourself then you will definitely want to have a look at the “Define your own new tab!” extension for Google Chrome. Before Unless you are using a Speed Dial (or similar) extension each time you click on the “New Tab Button” you get the same old page. It would certainly be a lot more satisfying if you could choose custom webpage(s) to open as new tabs. After Once you have the extension installed the best thing to do is click on the “New Tab Button”. That will open up the “Options Page” where you can enter one or two custom website URLs of your choosing. Once you have your custom URLs entered click on “Save”. As soon as you click on the “New Tab Button” your new custom webpage(s) will open. If you chose two webpages the first choice will open focused on the “right side” instead of the “left”. Clicking on the “Home Button” will also open the webpage(s) that you chose. The webpage(s) that you chose will also open as your starting “Home Pages” each time that you start your browser. Conclusion If you have wanted to choose your own custom “New Tab Page” then this is the extension that you have been waiting for. Links Download the Define your own new tab! extension (Google Chrome Extensions) Similar Articles Productive Geek Tips Find Similar Websites in Google ChromeAccess Google Chrome’s Special Pages the Easy WayEnable Vista Black Style Theme for Google Chrome in XPSet Custom Reload Times for Individual Webpages in ChromeEnable Auto-Paging Goodness in Google Chrome TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Play Music in Chrome by Simply Dragging a File 15 Great Illustrations by Chow Hon Lam Easily Sync Files & Folders with Friends & Family Amazon Free Kindle for PC Download Stretch popurls.com with a Stylish Script (Firefox) OldTvShows.org – Find episodes of Hitchcock, Soaps, Game Shows and more

  Read the article

• Download YouTube Videos the Easy Way

  - by Trevor Bekolay

  You can’t be online all the time, and despite the majority of YouTube videos being nut-shots and Lady Gaga parodies, there is a lot of great content that you might want to download and watch offline. There are some programs and browser extensions to do this, but we’ve found that the easiest and quickest method is a bookmarklet that was originally posted on the Google Operating System blog (it’s since been removed). It will let you download standard quality and high-definition movies as MP4 files. Also, because it’s a bookmarklet, it will work on any modern web browser, and on any operating system! Installing the bookmarket is easy – just drag and drop the Get YouTube video link below to the bookmarks bar of your browser of choice. If you’ve hidden the bookmark bar, in most browsers you can right-click on the link and save it to your bookmarks. Get YouTube video   With the bookmarklet available in your browser, go to the YouTube video that you’d like to download. Click on the Get YouTube video link in your bookmarks bar, or in the bookmarks menu, wherever you saved it earlier. You will notice some new links appear below the description of the video. If you download the standard definition file, it will save as “video.mp4” by default. However, if you download the high definition file, it will save with the same name as the title of the video. There are many methods of downloading YouTube videos…but we think this is the easiest and quickest method. You don’t have to install anything or use up resources, but you can still get a link to download an MP4 with one click. Do you use a different method to download Youtube videos? Let us know about it in the comments! javascript:(function(){if(document.getElementById(’download-youtube-video’))return;var args=null,video_title=null,video_id=null,video_hash=null;var download_code=new Array();var fmt_labels={‘18′:’standard%20MP4′,’22′:’HD%20720p’,'37′:’HD%201080p’};try{args=yt.getConfig(’SWF_ARGS’);video_title=yt.getConfig(’VIDEO_TITLE’)}catch(e){}if(args){var fmt_url_map=unescape(args['fmt_url_map']);if(fmt_url_map==”)return;video_id=args['video_id'];video_hash=args['t'];video_title=video_title.replace(/[%22\'\?\\\/\:\*%3C%3E]/g,”);var fmt=new Array();var formats=fmt_url_map.split(’,');var format;for(var i=0;i%3Cformats.length;i++){var format_elems=formats[i].split(’|');fmt[format_elems[0]]=unescape(format_elems[1])}for(format in fmt_labels){if(fmt[format]!=null){download_code.push(’%3Ca%20href=\”+(fmt[format]+’&title=’+video_title)+’\'%3E’+fmt_labels[format]+’%3C/a%3E’)}elseif(format==’18′){download_code.push(’%3Ca%20href=\’http://www.youtube.com/get_video?fmt=18&video_id=’+video_id+’&t=’+video_hash+’\'%3E’+fmt_labels[format]+’%3C/a%3E’)}}}if(video_id==null||video_hash==null)return;var div_embed=document.getElementById(’watch-embed-div’);if(div_embed){var div_download=document.createElement(’div’);div_download.innerHTML=’%3Cbr%20/%3E%3Cspan%20id=\’download-youtube-video\’%3EDownload:%20′+download_code.join(’%20|%20′)+’%3C/span%3E’;div_embed.appendChild(div_download)}})() Similar Articles Productive Geek Tips Watch YouTube Videos in Cinema Style in FirefoxDownload YouTube Videos with Cheetah YouTube DownloaderStop YouTube Videos from Automatically Playing in FirefoxImprove YouTube Video Viewing in Google ChromeConvert YouTube Videos to MP3 with YouTube Downloader TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional 15 Great Illustrations by Chow Hon Lam Easily Sync Files & Folders with Friends & Family Amazon Free Kindle for PC Download Stretch popurls.com with a Stylish Script (Firefox) OldTvShows.org – Find episodes of Hitchcock, Soaps, Game Shows and more Download Microsoft Office Help tab

  Read the article

• Is F# a good language for card game AI?

  - by Anthony Brien

  I'm writing a Mahjong Game in C# (the Chinese traditional game, not the solitaire kind). While writing the code for the bot player's AI, I'm wondering if a functional language like F# would be a more suitable language than what I currently use which is C# with a lot of Linq. I don't know much about F# which is why I ask here. To illustrate what I try to solve, here's a quick summary of Mahjong: Mahjong plays a bit like Gin Rummy. You have 13 tiles in your hand, and each turn, you draw a tile and discard another one, trying to improve your hand towards a winning Mahjong hand, which consists or 4 sets and a pair. Sets can be a 3 of a kind (pungs), 4 of a kind (kongs) or a sequence of 3 consecutive tiles (chows). You can also steal another player's discard, if it can complete one of your sets. The code I had to write to detect if the bot can declare 3 consecutive tiles set (chow) is pretty tedious. I have to find all the unique tiles in the hand, and then start checking if there's a sequence of 3 tiles that contain that one in the hand. Detecting if the bot can go Mahjong is even more complicated since it's a combination of detecting if there's 4 sets and a pair in his hand. And that's just a standard Mahjong hand. There's also numerous "special" hands that break those rules but are still a Mahjong hand. For example, "13 unique wonders" consists of 13 specific tiles, "Jade Empire" consists of only tiles colored green, etc. In a perfect world, I'd love to be able to just state the 'rules' of Mahjong, and have the language be able to match a set of 13 tiles against those rules to retrieve which rules it fulfills, for example, checking if it's a Mahjong hand or if it includes a 4 of a kind. Is this something F#'s pattern matching feature can help solve?

  Read the article

• Convert Video and Remove Commercials in Windows 7 Media Center with MCEBuddy 1.1

  - by DigitalGeekery

  Today look at MCEBuddy for Windows 7 Media Center. This handy app automatically takes your recorded TV files and converts them to MP4, AVI, WMV, or MPEG format. It even has the option to cut out those annoying commercials during the conversion process. Installation and Configuration Download and extract MCE Buddy. (Download link below) Run the setup.exe file and take all the default settings.   Open MCEBuddy Configuration by going to Start > All Programs > MCEBuddy > MCEBuddy Configuration.   Video Paths The MCEBuddy application is comprised of a single window. The first step you’ll want to take is to define your Source and Destination paths. The “Source” will most likely be your Recorded TV directory. The Destination should NOT be the same as the Source folder. Note: The Recorded TV directory in Windows 7 Media Center will only display and play WTV & DVR-MS files. To watch the converted MP4, AVI, WMV, or MPEG files in Windows Media Center you’ll need to add them to your Video Library or Movie Library. Video Conversion Next, choose your preferred format for conversion from the “Convert to” drop down list. The default is MP4 with the H.264 codec. You’ll find a wide variety of formats. The first set of conversion options in the drop down list will resize the video to 720 pixels wide. The next two sections maintain the original size, and the final section is for a variety of portable devices.   Next, you’ll see a group of check boxes below the “Convert to” drop down list. The Commercial Skipping option will cut the commercials while converting the file. Sort By Series will create a sub-folder in your Destination folder for each TV show. Delete Original will delete the WTV file after conversion is complete. (This option is not recommended unless you are sure your files are converting properly and you no longer need the WTV file.) Start Minimized is ideal if you want to run MCEBuddy on Windows startup. Note: MCEBuddy installs and uses Comskip for commercial cutting by default. However, if you have ShowAnalyzer installed, it will use that application instead. Advanced Options To choose a specific time of day to perform the conversions, click the checkbox under the “Advanced Options,” and select the starting and ending times for conversion. For example, convert between 2 hours and 5 hours would be between 2 am and 5am. If you want MCEBuddy to constantly look for and immediately convert new recordings, leave the box unchecked.   The “Video age” option lets you choose a specific number of days to wait before performing the conversion. This can be useful if you want to watch the recordings first and delete those you don’t wish to convert. You can also choose the “Sub Directories” if you’d like MCEBuddy to convert files that are in a sub-folder in your “Source” directory. Second Conversion As you might expect, this option allows MCEBuddy to perform a second conversion of your file. This can be useful if you want to use your first conversion to create a higher quality MP4 or AVI file for playback on a larger screen, and a second one for a portable device such as Zune or iPhone. The same options from the first conversion are also available for the second. You’ll want to choose a separate Destination folder for the second conversion.   Start and Monitor Progress To start converting your video files, simply press the “Start” button at the bottom. You’ll be able to follow the progress in the “Current Activity” section. When all the video files have finished converting, or there are no current files to convert, MCEBuddy will display a “Started – Idle” status. Click “Stop” if you don’t want MCEBuddy to continue scanning for new files.   Conclusion MCEBuddy 1.1 will convert all WTV files in it’s source folder. If you want to pick and choose which recordings to convert, you may want to define a source folder different than the Recorded TV folder and then just copy or move the files you wish to convert into the new source folder. The conversion process does take a good bit of time. If you choose the commercial skipping and second conversion options it can take several hours to fully convert one TV recording. Overall, MCEBuddy makes a nice Media Center addition for those that want to save some space with smaller size files, convert Recorded TV files for their portable device, or automatically remove commercials. If you’re looking for a different method to skip commercials check out our post on how to skip commercials in Windows 7 Media Center. Download MCEBuddy 1.1 Similar Articles Productive Geek Tips Using Netflix Watchnow in Windows Vista Media Center (Gmedia)How To Skip Commercials in Windows 7 Media CenterHow To Convert Video Files to MP3 with VLCStartup Customizations for Media Center in Windows 7Add Folders to the Movie Library in Windows 7 Media Center TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional The Ultimate Excel Cheatsheet Convert the Quick Launch Bar into a Super Application Launcher Automate Tasks in Linux with Crontab Discover New Bundled Feeds in Google Reader Play Music in Chrome by Simply Dragging a File 15 Great Illustrations by Chow Hon Lam

  Read the article

• Hack Extension Files to Make Them Version-Compatible for Firefox

  - by Asian Angel

  A well known drawback in using Firefox is the problem with extension compatibility when a new major version is released. Whether it is for a new extension that you are trying for the first time or an old favorite we have a way to get those extensions working for you again. There are multiple reasons why you might want to choose this method to fix a non-compatible extension: You are uncomfortable with tweaking the “about:config” settings You prefer to maintain the original “about:config” settings in a pristine state and like having compatibility checking active You are looking to gain some “geek cred” Keep in mind that most extensions will work perfectly well with a new version of Firefox and simply have the “version compatibility number” problem. But once in a while there may be one that needs to have some work done on it by the extension’s author. The Problem Here is a perfect example of everyone’s least favorite “extension message”. This is the last thing that you need when all that you want is for your favorite extension (or a new one) to work on a fresh clean install. Note: This works nicely to “replace” non-compatible extensions already present in your browser if you are simply upgrading. Hacking the XPI File For this procedure you will need to manually download the extension to your hard-drive (right click on the extension’s “Install Button” and select “Save As”). Once you have done that you are ready to start hacking the extension. For our example we chose the “GCal Popup Extension”. The best thing to do is place the extension in a new folder (i.e. the Desktop or other convenient location) then unzip it just the same way that you would with any regular zip file. Once it is unzipped you will see the various folders and files that were in the “xpi file” (we had four files here but depending on the extension the number may vary). There is only one file that you need to focus on…the “install.rdf” file. Note: At this point you should move the original extension file to a different location (i.e. outside of the folder) so that it is no longer present. Open the file in “Notepad” so that you can change the number for the “maxVersion”. Here the number is listed as “3.5.*” but we needed to make it higher… Replacing the “5” with a “7” is all that we needed to do. Once you have entered your new “maxVersion” number save the file. At this point you will need to re-zip all of the files back into a single file. Make certain that you “create” a file with the “.zip file extension” otherwise this will not work. Once you have the new zip file created you will need to rename the entire file including the “file extension”. For our example we copied and pasted the original extension name. Once you have changed the name click outside of the “text area”. You will see a small message window like this asking for confirmation…click “Yes” to finish the process. Now your modified/updated extension is ready to install. Drag the extension into your browser to install it and watch that wonderful “Restart to complete the installation.” message appear. As soon as your browser starts you can check the “Add-ons Manager Window” and see the version compatibility numbers for the extension. Looking very very nice! And just like that your extension should be up and running without any problems. Conclusion If you are looking to try something new, gain some geek cred, or just want to keep your Firefox install as close to the original condition as possible this method should get those extensions working nicely for you again. Similar Articles Productive Geek Tips Make Firefox Extensions Compatible After Firefox Update Breaks Them For No Good ReasonCheck Extension Compatibility for Upcoming Firefox ReleasesFirefox 3.6 Release Candidate Available, Here’s How to Fix Your Incompatible ExtensionsHow To Force Extension Compatibility with Firefox 3.6+Test and Report Add-on Compatibility in Firefox TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional 15 Great Illustrations by Chow Hon Lam Easily Sync Files & Folders with Friends & Family Amazon Free Kindle for PC Download Stretch popurls.com with a Stylish Script (Firefox) OldTvShows.org – Find episodes of Hitchcock, Soaps, Game Shows and more Download Microsoft Office Help tab

  Read the article

• doubleTwist is an iTunes Alternative that Supports Several Devices

  - by Mysticgeek

  There are a lot of iTunes users out there, but unfortunately you can’t use it with all of your portable devices. Today we take a look at doubleTwist, which allows you to sync your media with a multitude of portable devices and easily share it as well. Note: You can run doubleTwist on Windows or Mac, and here we take a look at the Windows version. Install & Setup doubleTwist Download and install doubleTwist using the defaults in the wizard… Installation takes several moments and you’ll see the progress while it finishes up. After installation is complete, sign up for an account if you don’t already have one. If you do have an account you can login right away. Enter in your username, email address, and password then click Sign Up.   You’ll get an confirmation email and need to activate the account before you can sign in. Once you’re all signed up, launch doubleTwist and you’ll be ready to start using it. doubleTwist Music The default music store is Amazon MP3 store which might appeal to those of you who are tired of the iTunes music store. A lot of times the music is cheaper and available at higher bit rates. You can start searching for music in the Amazon Music Store and previewing songs. To purchase anything though you will need to sign into your Amazon account.   Under Playlists it allows you to import your playlists from iTunes and Windows Media Player, which is a handy feature if you don’t want to set them up again. Of course you can play your songs through the music player on your desktop. Devices One of the coolest things about doubleTwist is that it supports a lot of different portable media devices including iPod, BlackBerry, Windows Mobile, Android, PSP, Smartphones, and much more. Unfortunately for Zune users…there isn’t any support for the Zune of Zune HD yet. Here we have a Creative Zen attached and can sync songs, pictures, and podcasts. An HTC-S620 Smartphone running Windows Mobile… Even a simple USB drive will be recognized and you can transfer your media to it as well.   Podcasts Finding your favorite audio and video podcasts is easy with the search feature. You can easily manage and subscribe to podcasts in the subscriptions section.   You can watch the video podcasts directly in doubleTwist. Sharing Media Also you can share digital media with your friends or add it to Flickr and YouTube. You can send any pictures, videos, or music in your library to other people by dragging it over. You can email users individually… Or access contacts from your Gmail and Yahoo accounts. There is a limit to how much you can send of video podcasts… only the first 10 minutes. The person you send it to will get a link in their email that points to your My Feed page on the doubleTwist site.   There they can access the media you sent…in this example it’s a video podcast but you can share any media. Other Features Under My Profile you can change your avatar and personal information.   In Preferences you can choose where media is stored, its startup actions, podcast subscriptions, and manage device syncing. Conclusion It’s still in beta stage so expect some bugs, but overall doubleTwist is a solid media player that is easy to use with a clean interface. It’s simple and doesn’t try to do too much so is fairly easy on system resources. The main annoyance is it tries to catalog all of your media out of the box. Which may be alright for some users with smaller media collections, but very irritating to advanced users with large collections. Also there is currently no support for the Zune, but according to their forums, it’s on the way. At the time of this writing it’s in public beta and can be downloaded for XP, Vista, Windows 7 (32 & 64 bit), and Mac OSX. If you’re looking for an iTunes alternative that works with several different portable devices, you might want to give DoubleTwist a try. Download DoubleTwist Public Beta See If Your Media Device is Supported by doubleTwist Similar Articles Productive Geek Tips MusicBee is a Fast and Powerful Music ManagerAvoid the Apple QuickTime Bloat with QT LiteBeginner Geek: Set Default Programs in Windows 7 and VistaBeginner Geeks: OpenOffice is a Free Cross Platform Alternative to MS OfficeManage Devices the Easy Way with Device Stage in Windows 7 TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Play Music in Chrome by Simply Dragging a File 15 Great Illustrations by Chow Hon Lam Easily Sync Files & Folders with Friends & Family Amazon Free Kindle for PC Download Stretch popurls.com with a Stylish Script (Firefox) OldTvShows.org – Find episodes of Hitchcock, Soaps, Game Shows and more

  Read the article

• Center Pictures and Other Objects in Office 2007 & 2010

  - by Matthew Guay

  Sometimes it can be difficult to center a picture in a document just by dragging it dragging it around. Today we show you how to center pictures, images, and other objects perfectly in Word and PowerPoint. Note: For this tutorial we’re using Office 2010, but the steps are nearly identical in 2007. Centering a Picture in Word First let’s insert a picture into our document.  Click the Insert tab, and then click Picture. Once you select the picture you want, it will be added to your document.  Usually, pictures are added wherever your curser was in the document, so in a blank document it will be added at the top left. Also notice Picture Tools show up in the Ribbon after inserting an image. Note: The following menu items are available in Picture Tools Format tab which is displayed when you select the object or image you’re working with. How do we align the picture just like we want?  Click Position to get some quick placement options, including centered in the middle of the document or on the top.    However, for more advanced placement, we can use the Align tool.  If Word isn’t maximized, you may only see the icon without the “Align” label. Notice the tools were grayed out in the menu by default.  To be able to change the Alignment, we need to first change the text wrap settings. Click the Wrap Text button, and any option other than “In Line with Text”.  Your choice will depend on the document you’re writing, just choose the option that works best in the document.   Now, select the Align tools again.  You can now position your image precisely with these options. Align Center will position your picture in the center of the page widthwise. Align Middle will put the picture in the middle of the page height-wise. This works the same with textboxes.  Simply click the Align button in the Format tab, and you can center it in the page. And if you’d like to align several objects together, simply select them all, click Group, and then select Group from the menu.   Now, in the align tools, you can center the whole group on your page for a heading, or whatever you want to use the pictures for. These steps also work the same with Office 2007. Center objects in PowerPoint This works similar in PowerPoint, except that pictures are automatically set for square wrapping automatically, so you don’t have to change anything.  Simply insert the picture or other object of your choice, click Align, and choose the option you want. Additionally, if one object is already aligned like you want, drag another object near it and you will see a Smart Guide to help you align or center the second object with the first.  This only works with shapes in PowerPoint 2010 beta, but will work with pictures, textboxes, and media in the final release this summer. Conclusion These are good methods for centering images and objects in Word and PowerPoint.  From designing perfect headers to emphasizing your message in a PowerPoint presentation, this is something we’ve found useful and hope you will too. Since we’re talking about Office here, it’s worth mentioning that Microsoft has announced the Technology Guarantee Program for Office 2010. Essentially what this means is, if you purchase a version of Office 2007 between March 5th and September 30th of this year, when Office 2010 is released you’ll be able to upgrade to it for free! Similar Articles Productive Geek Tips Add or Remove Apps from the Microsoft Office 2007 or 2010 SuiteAdd More Functions To Office 2007 By Installing Add-InsCustomize Your Welcome Picture Choices in Windows VistaEasily Rotate Pictures In Word 2007Add Effects To Your Pictures in Word 2007 TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Discover New Bundled Feeds in Google Reader Play Music in Chrome by Simply Dragging a File 15 Great Illustrations by Chow Hon Lam Easily Sync Files & Folders with Friends & Family Amazon Free Kindle for PC Download Stretch popurls.com with a Stylish Script (Firefox)

  Read the article

• Getting Started with Boxee

  - by DigitalGeekery

  Boxee is a free Media PC application that runs on Windows, Mac, and Ubuntu Linux. With Boxee, you can integrate online video, music and pictures, with your own local media and social networking. Today we are going to take a closer look at Boxee and some of it’s features. Note: We used Windows 7 for this tutorial. Your experience on a Mac or Ubuntu Linux build may vary slightly. Hardware Requirements x86 (Intel/AMD processor) based system running at 1.0GHz or greater 512MB system memory (RAM) or more Video card capable of OpenGL 1.4, Direct X 9.0 Software Requirements Mac OS X 10.4+ (Intel based processor) Ubuntu Linux 9.04+ x86 only Windows XP / Vista / 7 (64 bit in Vista or 7) Installing Boxee Before downloading and installing Boxee, you’ll need to register for a free account. (See link below) Once your account is registered and verified, you’ll be able to log in and download the application. Installation is pretty straightforward…just take the defaults. Boxee will open in full screen mode and you’ll be prompted to login with your username and password. Before you login, you may want to take a moment to click on the “Guide” icon and learn a bit about navigating in Boxee. Some basic keyboard navigation is as follows. Move right, left, up, & down with the arrow keys. Hit “Enter” to make a selection, the forward slash key “\” to toggle between full screen and windowed mode, and “Esc” to go back to the previous screen. For Playback, the volume is controlled by plus & minus (+/-) keys, you can Play / Pause using the spacebar, and skip using the arrow keys. Boxee will also work with any infrared remote. If you have an iPhone or iPod Touch you can download software to enable them as a Boxee remote. If you’re using a mouse and keyboard, hover over the username and password boxes to enter your login credentials. If using a a remote, click your OK button and enter credentials with the on screen keyboard. Click “Done” when finished.   When you are ready to login, enter your credentials and click “Login.” On first login, you’ll be prompted to calibrate your screen. If you choose “Skip” you can always calibrate your screen later under Settings > Appearance > Screen. When Boxee opens, you’ll be greeted by the Home screen. To the left will be your Feeds. This will be any recommended content from friends on Boxee, and social networks such as Facebook and Twitter. Although, when you first login, it will mainly be info from the Boxee staff. You’ll have “Featured” content in the center and your Queue on the right. You’ll also have the Menu along the top.   Pop Up Menu The Pop Menu can be accessed by hitting the “Esc” key, or back on your remote. Depending on where you are located in Boxee, you may have to hit it a few time to “back out” to the Pop Up menu. From the Pop Up Menu, you can easily access any of the resources, settings, and favorites. Queue The Queue is your playlist of TV shows, movies, or Internet videos you wish to watch. When you find an offering you’d like to watch, select it and then click “Add to Queue.” The selected item will be added to your Queue and can be accessed at any time from the Menu. TV Show Library The TV Show library can contain files from your local hard drive or streaming content from the Web. Boxee pulls content from a variety of online locations such as Hulu and TV network sites. Click on the show to see which specific episodes are currently available. To search for your favorite shows, click on the yellow arrow to the left, or navigate to the left with your keyboard or remote. Enter your selection into the search box. My Apps By default, the “My Apps” section includes a list of the most popular apps, such as Netflix, Pandora, YouTube, and others. You can remove Apps from “My Apps,” or add new Apps from the Apps Library.   To access all the available Apps, click on the left arrow button, or click on the yellow arrow at the left, then select “App Library.” Choose an App from the Library and click it to open… … and then select “Add to My Apps.” Or, you can click start to play the App if you don’t wish to Add it to your “My Apps.”   Music, Pictures, and Movies Boxee will scan your PC for movies, pictures, and music. You can choose to scan specific folders by clicking on “Scan Media Folders…” … or from the Pop Up Menu, selecting Settings > Media, and then browsing for your media.   Conclusion Boxee to be a great way to integrate your local media with online streaming content. It can be run as an application on your home PC, or as a stand alone media PC. It should also be noted, however, that your access to online content will vary depending on your country. If you are a Windows Media Center user and and want to add the additional features of Boxee, check out our article on integrating Boxee with Windows 7 Media Center. Download Boxee Similar Articles Productive Geek Tips Integrate Boxee with Media Center in Windows 7Disable Fast User Switching on Windows XPOops! Sorry About the Feed ErrorsDisplay a list of Started Services from the Command Line (Windows)Feedburner to Google: Worst Transition Ever. TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Discover New Bundled Feeds in Google Reader Play Music in Chrome by Simply Dragging a File 15 Great Illustrations by Chow Hon Lam Easily Sync Files & Folders with Friends & Family Amazon Free Kindle for PC Download Stretch popurls.com with a Stylish Script (Firefox)

  Read the article

• Try out Windows Phone 7 on your PC today

  - by Matthew Guay

  Anticipation has been building for the new Windows Phone 7 Series ever since Microsoft unveiled it at the Mobile World Congress in February.  Now, thanks to free developer tools, you can get a first-hand experience of the basic Windows Phone 7 Series devices on your PC. Windows Phone 7 Series represents a huge change in the mobile field for Microsoft, bringing the acclaimed Zune HD UI to an innovative phone platform.  Windows Mobile has often been criticized for being behind other Smartphone platforms, but Microsoft seeks to regain the lead with this new upcoming release.  A platform must have developers behind it to be useful, so they have released a full set of free development tools so anyone can make apps for it today.  Or, if you simply want to play with Windows Phone 7, you can use the included emulator to try out the new Metro UI.  Here’s how to do this today on your Vista or 7 computer. Please note: These tools are a Customer Technology Preview release, so only install them if you’re comfortable using pre-release software. Getting Started First, download the Windows Phone Developer Tools CTP (link below), and run the installer.  This will install the Customer Technology Preview (CTP) versions of Visual Studio 2010 Express for Windows Phone, Windows Phone Emulator, Silverlight for Windows Phone, and XNA 4.0 Game Studio on your computer, all of which are required and cannot be installed individually. Accept the license agreement when prompted. Click “Install Now” to install the tools you need.  The only setup customization option is where to save the files, so choose Customize if you need to do so. Setup will now automatically download and install the components you need, and will additionally download either 32 or 64 bit programs depending on your operating system. About halfway thorough the installation, you’ll be prompted to reboot your system.  Once your computer is rebooted, setup will automatically resume without further input.   When setup is finished, click “Run the Product Now” to get started. Running Windows Phone 7 on your PC Now that you’ve got the Windows Phone Developer tools installed, it’s time to get the Windows Phone emulator running.  If you clicked “Run the Product Now” when the setup finished, Visual Studio 2010 Express for Windows Phone should have already started.   If not, simply enter “visual studio” in your start menu search and select “Microsoft Visual Studio 2010 Express for Windows Phone”. Now, to run the Windows Phone 7 emulator, we have to test an application.  So, even if you don’t know how to program, we can open a phone application template, and then test it to run the emulator.  First, click New Project on the left hand side of the front page. Any of the application templates would work for this, but here let’s select “Windows Phone Application”, and then click Ok. Here’s your new application template, which already contains the basic phone application framework.  This is where you’d start if you want to develop a Windows Phone app, but for now we just want to see Windows Phone 7 in action. So, to run the emulator, click Debug in the menu and then select Start Debugging. Your new application will launch inside the Windows Phone 7 Series emulator.  The default template doesn’t give us much, but it does show an example application running in Windows Phone 7.   Exploring Windows Phone 7 Click the Windows button on the emulator to go to the home screen.  Notice the Zune HD-like transition animation.  The emulator only includes Internet Explorer, your test application, and a few settings. Click the arrow on the right to see the available applications in a list. Settings lets you change the theme, regional settings, and the date and time in your emulator.  It also has an applications settings pane, but this currently isn’t populated. The Time settings shows a unique Windows Phone UI. You can return to the home screen by pressing the Windows button.  Here’s the Internet Explorer app running, with the virtual keyboard open to enter an address.  Please note that this emulator can also accept input from your keyboard, so you can enter addresses without clicking on the virtual keyboard. And here’s Google running in Internet Explorer on Windows Phone 7. Windows Phone 7 supports accelerometers, and you can simulate this in the emulator.  Click one of the rotate buttons to rotate the screen in that direction. Here’s our favorite website in Internet Explorer on Windows Phone 7 in landscape mode. All this, running right inside your Windows 7 desktop… Developer tools for Windows Phone 7 Although it may be fun to play with the Windows Phone 7 emulator, developers will be more excited to actually be able to create new and exciting apps for it.  The Windows Phone Developer Tools download includes Visual Studio Express and XNA Game Studio 4.0 which lets you create enticing games and apps for Windows Phones.  All development for Windows Phones will be in C#, Silverlight, and the XNA game framework.  Visual Studio Express for Windows Phone includes templates for these, and additionally has code samples to help you get started with development. Conclusion Many features are still not functional in this preview version, such as the search button and most of the included applications.  However, this still gives you a great way to experience firsthand the future of the Windows Phone platform.  And, for developers, this is your chance to set your mark on the Windows Phone 7 Series even before it is released to the public.  Happy playing and developing! Links Download Windows Phone Developer Tools CTP Windows Phone Developer Site Similar Articles Productive Geek Tips Keep Track of Homework Assignments with SoshikuWeekend Fun: Watch Television On Your PC With TVUPlayerEasily Manage Your Downloads with Download StatusbarCreate a Shortcut or Hotkey to Mute the System Volume in WindowsHow-To Geek on Lifehacker: How to Make Windows Vista Less Annoying TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Convert the Quick Launch Bar into a Super Application Launcher Automate Tasks in Linux with Crontab Discover New Bundled Feeds in Google Reader Play Music in Chrome by Simply Dragging a File 15 Great Illustrations by Chow Hon Lam Easily Sync Files & Folders with Friends & Family

  Read the article

• The Windows Browser Ballot Screen Offers Web Browser Choice to European Users

  - by Matthew Guay

  Since March, our friends across the pond in Europe get to decide which browser they want to install with their Windows OS. Today we thought we would take a look at the ballot choices, some are well known, and others you may not have heard of. Windows users in European countries should start seeing the so called “Browser Ballot Screen” after installing the Windows Update KB976002 (link below). The browser ballot offers a dozen different browsers, including some you’ve likely never heard of.  They each have some unique features, and are all free, and here we take a quick look at each of them. Internet Explorer 8 Internet Explorer is the world’s most used web browser, as it’s bundled with Windows. It also includes several unique features, including Accelerators that make it easy to search or find a map of a location, and InPrivate filtering to directly control what sites can get personal information.  Additionally, it offers great integration with Windows Touch and the new taskbar in Windows 7. IE 8 runs on Windows XP and newer, and is bundled with Windows 7. Mozilla Firefox 3.6 Firefox is the most popular browser other than Internet Explorer.  It is the modern descendant of Netscape, and is loved by web developers for its adherence to web standards, openness, and expandability.  It offers thousands of Add-ons and themes to let you customize it to fit your preferences. The most recent version has added Personas, which are quick, lightweight themes to let you personalize the look your browser. It’s open source, and runs on all modern versions of Windows, Mac OS X, and Linux. Of course thanks to Asian Angel, our resident browser expert, you can check out several articles regarding this popular IE alternative. Google Chrome 4 Google Chrome has gained an impressive amount of market share during its short time in the market. It offers a minimalistic interface and fast speeds with intensive web applications. The address bar is also a search bar, so you can enter a search query or web address and quickly get the information you need. With version 4 you can add a growing number of extensions, personalize it with a variety of stylish themes, and automatically translate foreign websites into your own language. Opera 10.50 Although Opera has been around for over a decade, relatively few users have used it. With the new 10.50 release, Opera has many unique features packed in a sleek UI. It integrates great with Aero and the Windows 7 taskbar, and lets you preview the contents of your websites in the tab bar. It also includes Opera Unite, a small personal web server to make file sharing easy, Opera Turbo to speed up your internet when the connection is slow, and Opera Link to keep all your copies of Opera in sync. It’s a popular browser on many mobile devices, and version 10.50 has a lot of enhancements. Apple Safari 4 Safari is the default browser in Mac OS X, and starting with version 3 it has been available for Windows as well. It’s based on Webkit, the popular new rendering engine that provides great speed and standards compatibility.  Safari 4 lets you browse your browsing history in a unique Coverflow interface, and shows your Top Sites in a fancy, 3D interface.  It’s also great for viewing mobile websites for the iPhone and other mobile devices through Developer Tools. Flock 2.5 Based on the popular Firefox core, Flock brings a multitude of social features to your browsing experience. You can view the latest YouTube videos, Flickr pictures, update your favorite social network, and keep up with your webmail thanks to It’s integration with a wide variety of services. You can even post to your blog through the integrated blog editor. If your time online is mostly spent in social services, this may be a browser you want to check out. Maxthon 2.5 Maxthon is a unique browser that builds on Internet Explorer to bring more features with IE’s rendering. Formerly known as MyIE2, Maxthon was popular for bringing tabbed browsing with IE rendering during the days of IE 6.  Today Maxthon supports a wide range of plugins and skins, so you can customize it however you want. It includes mouse gestures, a web accelerator to speed up pokey internet connections, a content blocker to remove unwanted content from sites, an online account to backup your favorites, and a nice download manager. Avant Browser Another nice browser based on Internet Explorer, Avant brings a wide variety of features in a nice brushed-metal interface. It includes an integrated AutoFill for forms, mouse gestures, customizable skins, and privacy protection features. It also includes a Flash blocker that will only load flash in webpages when you select them. You can also integrate Avant with an online account to store your bookmarks, feeds, settings and passwords online. Sleipnir Sleipnir is a customizable browser meant for advance users that is quite popular in Japan. It’s built on the Trident engine and virtually every aspect of is customizable unlike Internet Explorer.   FlashPeak SlimBrowser SlimBrowser from FlashPeak incorporates a lot of features like Popup Killer, Auto Login, site filtering and more. It’s based on Internet Explorer but offers a lot more customizable options out of the box.   K-meleon This basic browser is light on system resources and based on the Gecko engine. It’s been in development for years on SourceForge, and if you like to tweak virtually any aspect of your browser, this might be a good choice for you.   GreenBrowser GreenBrowser is based on Internet Explorer and is available in several languages. It has a large amount of features out of the box and is light on system resources.   Conclusion The European Union asked for more choices in the web browser they could choose from when installing Windows, and with the Browser Ballot Screen, they certainly get a variety to choose from.  If you’ve tried out some of the lesser known browsers, or think some important ones have been left out, leave a comment and tell us about it. Learn More About the Browser Ballot Screen and Download Alternatives to IE Windows Update KB976002 Similar Articles Productive Geek Tips Set the Default Browser on Ubuntu From the Command LineQuick Tip: Empty Internet Explorer 7 Cache when Browser is ClosedView Hidden Files and Folders in Ubuntu File BrowserSet the Default Browser and Email Client in UbuntuAccess Multiple Browsers from Firefox with Browser View Plus TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Play Music in Chrome by Simply Dragging a File 15 Great Illustrations by Chow Hon Lam Easily Sync Files & Folders with Friends & Family Amazon Free Kindle for PC Download Stretch popurls.com with a Stylish Script (Firefox) OldTvShows.org – Find episodes of Hitchcock, Soaps, Game Shows and more

  Read the article

• Use Autoruns to Manually Clean an Infected PC

  - by Mark Virtue

  There are many anti-malware programs out there that will clean your system of nasties, but what happens if you’re not able to use such a program?  Autoruns, from SysInternals (recently acquired by Microsoft), is indispensable when removing malware manually. There are a few reasons why you may need to remove viruses and spyware manually: Perhaps you can’t abide running resource-hungry and invasive anti-malware programs on your PC You might need to clean your mom’s computer (or someone else who doesn’t understand that a big flashing sign on a website that says “Your computer is infected with a virus – click HERE to remove it” is not a message that can necessarily be trusted) The malware is so aggressive that it resists all attempts to automatically remove it, or won’t even allow you to install anti-malware software Part of your geek credo is the belief that anti-spyware utilities are for wimps Autoruns is an invaluable addition to any geek’s software toolkit.  It allows you to track and control all programs (and program components) that start automatically with Windows (or with Internet Explorer).  Virtually all malware is designed to start automatically, so there’s a very strong chance that it can be detected and removed with the help of Autoruns. We have covered how to use Autoruns in an earlier article, which you should read if you need to first familiarize yourself with the program. Autoruns is a standalone utility that does not need to be installed on your computer.  It can be simply downloaded, unzipped and run (link below).  This makes is ideally suited for adding to your portable utility collection on your flash drive. When you start Autoruns for the first time on a computer, you are presented with the license agreement: After agreeing to the terms, the main Autoruns window opens, showing you the complete list of all software that will run when your computer starts, when you log in, or when you open Internet Explorer: To temporarily disable a program from launching, uncheck the box next to it’s entry.  Note:  This does not terminate the program if it is running at the time – it merely prevents it from starting next time.  To permanently prevent a program from launching, delete the entry altogether (use the Delete key, or right-click and choose Delete from the context-menu)).  Note:  This does not remove the program from your computer – to remove it completely you need to uninstall the program (or otherwise delete it from your hard disk). Suspicious Software It can take a fair bit of experience (read “trial and error”) to become adept at identifying what is malware and what is not.  Most of the entries presented in Autoruns are legitimate programs, even if their names are unfamiliar to you.  Here are some tips to help you differentiate the malware from the legitimate software: If an entry is digitally signed by a software publisher (i.e. there’s an entry in the Publisher column) or has a “Description”, then there’s a good chance that it’s legitimate If you recognize the software’s name, then it’s usually okay.  Note that occasionally malware will “impersonate” legitimate software, but adopting a name that’s identical or similar to software you’re familiar with (e.g. “AcrobatLauncher” or “PhotoshopBrowser”).  Also, be aware that many malware programs adopt generic or innocuous-sounding names, such as “Diskfix” or “SearchHelper” (both mentioned below). Malware entries usually appear on the Logon tab of Autoruns (but not always!) If you open up the folder that contains the EXE or DLL file (more on this below), an examine the “last modified” date, the dates are often from the last few days (assuming that your infection is fairly recent) Malware is often located in the C:\Windows folder or the C:\Windows\System32 folder Malware often only has a generic icon (to the left of the name of the entry) If in doubt, right-click the entry and select Search Online… The list below shows two suspicious looking entries:  Diskfix and SearchHelper These entries, highlighted above, are fairly typical of malware infections: They have neither descriptions nor publishers They have generic names The files are located in C:\Windows\System32 They have generic icons The filenames are random strings of characters If you look in the C:\Windows\System32 folder and locate the files, you’ll see that they are some of the most recently modified files in the folder (see below) Double-clicking on the items will take you to their corresponding registry keys: Removing the Malware Once you’ve identified the entries you believe to be suspicious, you now need to decide what you want to do with them.  Your choices include: Temporarily disable the Autorun entry Permanently delete the Autorun entry Locate the running process (using Task Manager or similar) and terminating it Delete the EXE or DLL file from your disk (or at least move it to a folder where it won’t be automatically started) or all of the above, depending upon how certain you are that the program is malware. To see if your changes succeeded, you will need to reboot your machine, and check any or all of the following: Autoruns – to see if the entry has returned Task Manager (or similar) – to see if the program was started again after the reboot Check the behavior that led you to believe that your PC was infected in the first place.  If it’s no longer happening, chances are that your PC is now clean Conclusion This solution isn’t for everyone and is most likely geared to advanced users. Usually using a quality Antivirus application does the trick, but if not Autoruns is a valuable tool in your Anti-Malware kit. Keep in mind that some malware is harder to remove than others.  Sometimes you need several iterations of the steps above, with each iteration requiring you to look more carefully at each Autorun entry.  Sometimes the instant that you remove the Autorun entry, the malware that is running replaces the entry.  When this happens, we need to become more aggressive in our assassination of the malware, including terminating programs (even legitimate programs like Explorer.exe) that are infected with malware DLLs. Shortly we will be publishing an article on how to identify, locate and terminate processes that represent legitimate programs but are running infected DLLs, in order that those DLLs can be deleted from the system. Download Autoruns from SysInternals Similar Articles Productive Geek Tips Using Autoruns Tool to Track Startup Applications and Add-onsHow To Get Detailed Information About Your PCSUPERAntiSpyware Portable is the Must-Have Spyware Removal Tool You NeedQuick Tip: Windows Vista Temp Files DirectoryClear Recent Commands From the Run Dialog in Windows XP TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional 15 Great Illustrations by Chow Hon Lam Easily Sync Files & Folders with Friends & Family Amazon Free Kindle for PC Download Stretch popurls.com with a Stylish Script (Firefox) OldTvShows.org – Find episodes of Hitchcock, Soaps, Game Shows and more Download Microsoft Office Help tab

  Read the article

1