Search Results

Search found 53 results on 3 pages for 'craftsmanship'.

Page 1/3 | 1 2 3  | Next Page >

  • Craftsmanship is ALL that Matters

    - by Wayne Molina
    Today, I'm going to talk about a touchy subject: the notion of working in a company that doesn't use the prescribed "best practices" in its software development endeavours.  Over the years I have, using a variety of pseudonyms, asked this question on popular programming forums.  Although I always add in some minor variation of the story to avoid suspicion that it's the same person posting, the crux of the tale remains the same: A Programmer’s Tale A junior software developer has just started a new job at an average company, creating average line-of-business applications for internal use (the most typical scenario programmers find themselves in).  This hypothetical newbie has spent a lot of time reading up on the "theory" of software development, devouring books, blogs and screencasts from well-known and respected software developers in the community in order to broaden his knowledge and "do what the pros do".  He begins his new job, eager to apply what he's learned on a real-world project only to discover that his new teammates doesn't use any of those concepts and techniques.  They hack their way through development, or in a best-case scenario use some homebrew, thrown-together semblance of a framework for their applications that follows not one of the best practices suggested by the “elite” in the software community - things like TDD (TDD as a "best practice" is the only subjective part of this post, but it's included here due to a very large following of respected developers who consider it one), the SOLID principles, well-known and venerable tools, even version control in a worst case and truly nightmarish scenario.  Our protagonist is frustrated that he isn't doing things the "proper" way - a way he's spent personal time digesting and learning about and, more importantly, a way that some of the top developers in the industry advocate - and turns to a forum to ask the advice of his peers. Invariably the answer I, in the guise of the concerned newbie, will receive is that A) I don't know anything and should just shut my mouth and sling code the bad way like everybody else on the team, and B) These "best practices" are fade or a joke, and the only thing that matters is shipping software to your customers. I am here today to say that anyone who says this, or anything like it, is not only full of crap but indicative of exactly the type of “developer” that has helped to give our industry a bad name.  Here is why: One Who Knows Nothing, Understands Nothing On one hand, you have the cognoscenti of the .NET development world.  Guys like James Avery, Jeremy Miller, Ayende Rahien and Rob Conery; all well-respected and noted programmers that are pretty much our version of celebrities.  These guys write blogs, books, and post videos outlining the "correct" way of writing software to make sure it not only works but is maintainable and extensible and a joy to work with.  They tout the virtues of the SOLID principles, or of using TDD/BDD, or using a mature ORM like NHibernate, Subsonic or even Entity Framework. On the other hand, you have Joe Everyman, Lead Software Developer at Initrode Corporation - in our hypothetical story Joe is the junior developer's new boss.  Joe's been with Initrode for 10 years, starting as the company’s very first programmer and over the years building up a little fiefdom of his own until at the present he’s in charge of all Initrode’s software development.  Joe writes code the same way he always has, without bothering to learn much, if anything.  He looked at NHibernate once and found it was "too hard", so he uses a primitive implementation of the TableDataGateway pattern as a wrapper around SqlClient.SqlConnection and SqlClient.SqlCommand instead of an actual ORM (or, in a better case scenario, has created his own ORM); the thought of using LINQ or Entity Framework or really anything other than his own hastily homebrew solution has never occurred to him.  He doesn't understand TDD and considers “testing” to be using the .NET debugger to step through code, or simply loading up an app and entering some values to see if it works.  He doesn't really understand SOLID, and he doesn't care to.  He's worked as a programmer for years, and that's all that counts.  Right?  WRONG. Who would you rather trust?  Someone with years of experience and who writes books, creates well-known software and is akin to a celebrity, or someone with no credibility outside their own minute environment who throws around their clout and company seniority as the "proof" of their ability?  Joe Everyman may have years of experience at Initrode as a programmer, and says to do things "his way" but someone like Jeremy Miller or Ayende Rahien have years of experience at companies just like Initrode, THEY know ten times more than Joe Everyman knows or could ever hope to know, and THEY say to do things "this way". Here's another way of thinking about it: If you wanted to get into politics and needed advice on the best way to do it, would you rather listen to the mayor of Hicktown, USA or Barack Obama?  One is a small-time nobody while the other is very well-known and, as such, would probably have much more accurate and beneficial advice. NOTE: The selection of Barack Obama as an example in no way, shape, or form suggests a political affiliation or political bent to this post or blog, and no political innuendo should be mistakenly read from it; the intent was merely to compare a small-time persona with a well-known persona in a non-software field.  Feel free to replace the name "Barack Obama" with any well-known Congressman, Senator or US President of your choice. DIY Considered Harmful I will say right now that the homebrew development environment is the WORST one for an aspiring programmer, because it relies on nothing outside it's own little box - no useful skill outside of the small pond.  If you are forced to use some half-baked, homebrew ORM created by your Director of Software, you are not learning anything valuable you can take with you in the future; now, if you plan to stay at Initrode for 10 years like Joe Everyman, this is fine and dandy.  However if, like most of us, you want to advance your career outside a very narrow space you will do more harm than good by sticking it out in an environment where you, to be frank, know better than everybody else because you are aware of alternative and, in almost most cases, better tools for the job.  A junior developer who understands why the SOLID principles are good to follow, or why TDD is beneficial, or who knows that it's better to use NHibernate/Subsonic/EF/LINQ/well-known ORM versus some in-house one knows better than a senior developer with 20 years experience who doesn't understand any of that, plain and simple.  Anyone who disagrees is either a liar, or someone who, just like Joe Everyman, Lead Developer, relies on seniority and tenure rather than adapting their knowledge as things evolve. In many cases, the Joe Everymans of the world act this way out of fear - they cannot possibly fathom that a “junior” could know more than them; after all, they’ve spent 10 or more years in the same company, doing the same job, cranking out the same shoddy software.  And here comes a newbie who hasn’t spent 10+ years doing the same things, with a fresh and often radical take on the craft, and Joe Everyman is afraid he might have to put some real effort into his career again instead of just pointing to his 10 years of service at Initrode as “proof” that he’s good, or that he might have to learn something new to improve; in most cases the problem is Joe Everyman, and by extension Initrode itself, has a mentality of just being “good enough”, and mediocrity is the rule of the day. A Thorn Bush is No Place for a Phoenix My advice is that if you work on a team where they don't use the best practices that some of the most famous developers in our field say is the "right" way to do things (and have legions of people who agree), and YOU are aware of these practices and can see why they work, then LEAVE the company.  Find a company where they DO care about quality, and craftsmanship, otherwise you will never be happy.  There is no point in "dumbing" yourself down to the level of your co-workers and slinging code without care to craftsmanship.  In 95% of these situations there will be no point in bringing it to the attention of Joe Everyman because he won't listen; he might even get upset that someone is trying to "upstage" him and fire the newbie, and replace someone with loads of untapped potential with a drone that will just nod affirmatively and grind out the tasks assigned without question. Find a company that has people smart enough to listen to the "best and brightest", and be happy.  Do not, I repeat, DO NOT waste away in a job working for ignorant people.  At the end of the day software development IS a craft, and a level of craftsmanship is REQUIRED for any serious professional.  When you have knowledgeable people with the credibility to back it up saying one thing, and small-time people who are, to put it bluntly, nobodies in the field saying and doing something totally different because they can't comprehend it, leave the nobodies to their own devices to fade into obscurity.  Work for a company that uses REAL software engineering techniques and really cares about craftsmanship.  The biggest issue affecting our career, and the reason software development has never been the respected, white-collar career it was meant to be, is because hacks and charlatans can pass themselves off as professional programmers without following a lick of good advice from programmers much better at the craft than they are.  These modern day snake-oil salesmen entrench themselves in companies by hoodwinking non-technical businesspeople and customers with their shoddy wares, end up in senior/lead/executive positions, and push their lack of knowledge on everybody unfortunate enough to work with/for/under them, crushing any dissent or voices of reason and change under their tyrannical heel and leaving behind a trail of dismayed and, often, unemployed junior developers who were made examples of to keep up the facade and avoid the shadow of doubt being cast upon them. To sum this up another way: If you surround yourself with learned people, you will learn.  Surround yourself with ignorant people who can't, as the saying goes, see the forest through the trees, and you'll learn nothing of any real value.  There is more to software development than just writing code, and the end goal should not be just "shipping software", it should be shipping software that is extensible, maintainable, and above all else software whose creation has broadened your knowledge in some capacity, even if a minor one.  An eager newbie who knows theory and thirsts for knowledge can easily be moulded and taught the advanced topics, but the same can't be said of someone who only cares about the finish line.  This industry needs more people espousing the benefits of software craftsmanship and proper software engineering techniques, and less Joe Everymans who are unwilling to adapt or foster new ways of thinking. Conclusion - I Cast “Protection from Fire” I am fairly certain this post will spark some controversy and might even invite the flames.  Please keep in mind these are opinions and nothing more.  A little healthy rant and subsequent flamewar can be good for the soul once in a while.  To paraphrase The Godfather: It helps to get rid of the bad blood.

    Read the article

  • My Message to the Software Craftsmanship Group

    - by Liam McLennan
    This is a message I posted to the software craftsmanship group, looking for a week-long, pairing / skill sharing opportunity in the USA. I am a journeyman software craftsman, currenlty living and working in Brisbane Australia. In April I am going to travel to the US to attend Alt.Net Seattle and Seattle codecamp. In between the two conferences I have five days in which I would like to undertake a craftsmanship mini-apprenticeship, pairing and skill sharing with your company. I do not require any compensation other than the opportunity to assist you and learn from you. Although my conferences are in Seattle I am happy to travel anywhere in the USA and Canada (excluding Hawaii :) ). Things I am good at: .NET web development, javascript, creating software that solves problems Things I am learning: Ruby, Rails, javascript If you are interested in having me as visiting craftsman from the 12th to the 16th of April please reply on this mailing list or contact me directly. Liam McLennan Now I wait…

    Read the article

  • Craftsmanship Tour: Day 3 & 4 8th Light

    - by Liam McLennan
    Thursday morning the Illinois public transport system came through for me again. I took the Metra train north from Union Station (which was seething with inbound commuters) to Prairie Crossing (Libertyville). At Prairie Crossing I met Paul and Justin from 8th Light and then Justin drove us to the office. The 8th Light office is in an small business park, in a semi-rural area, surrounded by ponds. Upstairs there are two spacious, open areas for developers. At one end of the floor is Doug Bradbury’s walk-and-code station; a treadmill with a desk and computer so that a developer can get exercise at work. At the other end of the floor is a hammock. This irregular office furniture is indicative of the 8th Light philosophy, to pursue excellence without being limited by conventional wisdom. 8th Light have a wall covered in posters, each illustrating one person’s software craftsmanship journey. The posters are a fascinating visualisation of the similarities and differences between each of our progressions. The first thing I did Thursday morning was to create my own poster and add it to the wall. Over two days at 8th Light I did some pairing with the 8th Lighters and we shared thoughts on software development. I am not accustomed to such a progressive and enlightened environment and I found the experience inspirational. At 8th Light TDD, clean code, pairing and kaizen are deeply ingrained in the culture. Friday, during lunch, 8th Light hosted a ‘lunch and learn’ event. Paul Pagel lead us through a coding exercise using micro-pomodori. We worked in pairs, focusing on the pedagogy of pair programming and TDD. After lunch I recorded this interview with Paul Pagel and Justin Martin. We discussed 8th light, craftsmanship, apprenticeships and the limelight framework. Interview with Paul Pagel and Justin Martin My time at Didit, Obtiva and 8th Light has convinced me that I need to give up some of my independence and go back to working in a team. Craftsmen advance their skills by learning from each other, and I can’t do that working at home by myself. The challenge is finding the right team, and becoming a part of it.

    Read the article

  • Craftsmanship Tour: Day 2 Obtiva

    - by Liam McLennan
    I like Chicago. It is a great city for travellers. From the moment I got off the plane at O’Hare everything was easy. I took the train to ‘the Loop’ and walked around the corner to my hotel, Hotel Blake on Dearborn St. Sadly, the elevated train lines in downtown Chicago remind me of ‘Shall We Dance’. Hotel Blake is excellent (except for the breakfast) and the concierge directed me to a pizza place called Lou Malnati's for Chicago style deep-dish pizza. Lou Malnati’s would be a great place to go with a group of friends. I felt strange dining there by myself, but the food and service were excellent. As usual in the United States the portion was so large that I could not finish it, but oh how I tried. Dave Hoover, who invited me to Obtiva for the day, had asked me to arrive at 9:45am. I was up early and had some time to kill so I stopped at the Willis Tower, since it was on my way to the office. Willis Tower is 1,451 feet (442 m) tall and has an observation deck at the top. Around the observation deck are a set of acrylic boxes, protruding from the side of the building. Brave soles can walk out on the perspex and look between their feet all the way down to the street. It is unnerving. Obtiva is a progressive, craftsmanship-focused software development company in downtown Chicago. Dave even wrote a book, Apprenticeship Patterns, that provides a catalogue of patterns to assist aspiring software craftsmen to achieve their goals. I spent the morning working in Obtiva’s software studio, an open xp-style office that houses Obtiva’s in-house development team. For lunch Dave Hoover, Corey Haines, Cory Foy and I went to a local Greek restaurant (not Dancing Zorbas). Dave, Corey and Cory are three smart and motivated guys and I found their ideas enlightening. It was especially great to chat with Corey Haines since he was the inspiration for my craftsmanship tour in the first place. After lunch I recorded a brief interview with Dave. Unfortunately, the battery in my camera went flat so I missed recording some interesting stuff. Interview with Dave Hoover In the evening Obtiva hosted an rspec hackfest with David Chelimsky and others. This was an excellent opportunity to be around some of the very best ruby programmers. At 10pm I went back to my hotel to get some rest before my train north the next morning.

    Read the article

  • Mauritius Software Craftsmanship Community

    There we go! I finally managed to push myself forward and pick up an old, actually too old, idea since I ever arrived here in Mauritius more than six years ago. I'm talking about a community for all kind of ICT connected people. In the past (back in Germany), I used to be involved in various community activities. For example, I was part of the Microsoft Community Leader/Influencer Program (CLIP) in Germany due to an FAQ on Visual FoxPro, actually Active FoxPro Pages (AFP) to be more precise. Then in 2003/2004 I addressed the responsible person of the dFPUG user group in Speyer in order to assist him in organising monthly user group meetings. Well, he handed over management completely, and attended our meetings regularly. Why did it take you so long? Well, I don't want to bother you with the details but short version is that I was too busy on either job (building up new companies) or private life (got married and we have two lovely children, eh 'monsters') or even both. But now is the time where I was starting to look for new fields given the fact that I gained some spare time. My businesses are up and running, the kids are in school, and I am finally in a position where I can commit myself again to community activities. And I love to do that! Why a new user group? Good question... And 'easy' to answer. Since back in 2007 I did my usual research, eh Google searches, to see whether there existing user groups in Mauritius and in which field of interest. And yes, there are! If I recall this correctly, then there are communities for PHP, Drupal, Python (just recently), Oracle, and Linux (which used to be even two). But... either they do not exist anymore, they are dormant, or there is only a low heart-beat, frankly speaking. And yes, I went to meetings of the Linux User Group Meta (Mauritius) back in 2010/2011 and just recently. I really like the setup and the way the LUGM is organised. It's just that I have a slightly different point of view on how a user group or community should organise itself and how to approach future members. Don't get me wrong, I'm not criticizing others doing a very good job, I'm only saying that I'd like to do it differently. The last meeting of the LUGM was awesome; read my feedback about it. Ok, so what's up with 'Mauritius Software Craftsmanship Community' or short: MSCC? As I've already written in my article on 'Communities - The importance of exchange and discussion' I think it is essential in a world of IT to stay 'connected' with a good number of other people in the same field. There is so much dynamic and every day's news that it is almost impossible to keep on track with all of them. The MSCC is going to provide a common platform to exchange experience and share knowledge between each other. You might be a newbie and want to know what to expect working as a software developer, or as a database administrator, or maybe as an IT systems administrator, or you're an experienced geek that loves to share your ideas or solutions that you implemented to solve a specific problem, or you're the business (or HR) guy that is looking for 'fresh' blood to enforce your existing team. Or... you're just interested and you'd like to communicate with like-minded people. Meetup of 26.06.2013 @ L'arabica: Of course there are laptops around. Free WiFi, power outlet, coffee, code and Linux in one go. The MSCC is technology-agnostic and spans an umbrella over any kind of technology. Simply because you can't ignore other technologies anymore in a connected IT world as we have. A front-end developer for iOS applications should have the chance to connect with a Python back-end coder and eventually with a DBA for MySQL or PostgreSQL and exchange their experience. Furthermore, I'm a huge fan of cross-platform development, and it is very pleasant to have pure Web developers - with all that HTML5, CSS3, JavaScript and JS libraries stuff - and passionate C# or Java coders at the same table. This diversity of knowledge can assist and boost your personal situation. And last but not least, there are projects and open positions 'flying' around... People might like to hear others opinion about an employer or get new impulses on how to tackle down an issue at their workspace, etc. This is about community. And that's how I see the MSCC in general - free of any limitations be it by programming language or technology. Having the chance to exchange experience and to discuss certain aspects of technology saves you time and money, and it's a pleasure to enjoy. Compared to dusty books and remote online resources. It's human! Organising meetups (meetings, get-together, gatherings - you name it!) As of writing this article, the MSCC is currently meeting every Wednesday for the weekly 'Code & Coffee' session at various locations (suggestions are welcome!) in Mauritius. This might change in the future eventually but especially at the beginning I think it is very important to create awareness in the Mauritian IT world. Yes, we are here! Come and join us! ;-) The MSCC's main online presence is located at Meetup.com because it allows me to handle the organisation of events and meeting appointments very easily, and any member can have a look who else is involved so that an exchange of contacts is given at any time. In combination with the other entities (G+ Communities, FB Pages or in Groups) I advertise and manage all future activities here: Mauritius Software Craftsmanship Community This is a community for those who care and are proud of what they do. For those developers, regardless how experienced they are, who want to improve and master their craft. This is a community for those who believe that being average is just not good enough. I know, there are not many 'craftsmen' yet but it's a start... Let's see how it looks like by the end of the year. There are free smartphone apps for Android and iOS from Meetup.com that allow you to keep track of meetings and to stay informed on latest updates. And last but not least, there is a Trello workspace to collect and share ideas and provide downloads of slides, etc. Trello is also available as free smartphone app. Sharing is caring! As mentioned, the #MSCC is present in various social media networks in order to cover as many people as possible here in Mauritius. Following is an overview of the current networks: Twitter - Latest updates and quickies Google+ - Community channel Facebook - Community Page LinkedIn - Community Group Trello - Collaboration workspace to share and develop ideas Hopefully, this covers the majority of computer-related people in Mauritius. Please spread the word about the #MSCC between your colleagues, your friends and other interested 'geeks'. Your future looks bright Running and participating in a user group or any kind of community usually provides quite a number of advantages for anyone. On the one side it is very joyful for me to organise appointments and get in touch with people that might be interested to present a little demo of their projects or their recent problems they had to tackle down, and on the other side there are lots of companies that have various support programs or sponsorships especially tailored for user groups. At the moment, I already have a couple of gimmicks that I would like to hand out in small contests or raffles during one of the upcoming meetings, and as said, companies provide all kind of goodies, books free of charge, or sometimes even licenses for communities. Meeting other software developers or IT guys also opens up your point of view on the local market and there might be interesting projects or job offers available, too. A community like the Mauritius Software Craftsmanship Community is great for freelancers, self-employed, students and of course employees. Meetings will be organised on a regular basis, and I'm open to all kind of suggestions from you. Please leave a comment here in blog or join the conversations in the above mentioned social networks. Let's get this community up and running, my fellow Mauritians! Recent updates The MSCC is now officially participating in the O'Reilly UK User Group programm and we are allowed to request review or recension copies of recent titles. Additionally, we have a discount code for any books or ebooks that you might like to order on shop.oreilly.com. More applications for user group sponsorship programms are pending and I'm looking forward to a couple of announcement very soon. And... we need some kind of 'corporate identity' - Over at the MSCC website there is a call for action (or better said a contest with prizes) to create a unique design for the MSCC. This would include a decent colour palette, a logo, graphical banners for Meetup, Google+, Facebook, LinkedIn, etc. and of course badges for our craftsmen to add to their personal blogs and websites. Please spread the word and contribute. Thanks!

    Read the article

  • Craftsmanship Tour Day 0: New York

    - by Liam McLennan
    Arriving at JFK, at dawn, is beautiful. From above 1,000ft I can see no crime, poverty or ugliness – just the dark orange sunrise-through-smog. The Atlantic appears calm, and I take that as a good sign. Today is the first day of my software craftsmanship tour. I will be visiting three of the shining lights of the software industry over five days, exchanging ideas and learning. Arriving on the red eye from Seattle I feel like hell. My lips, not used to the dry air, are cracked and bleeding. I get changed in the JFK restroom and make my way from the airport. Following Rik’s directions I take the airtrain to Jamaica. Rik is an engineering manager at Didit in Long Island, the first stop on my tour. From Jamaica I take the Long Island Rail Road train to Rockville Centre, home of Didit.

    Read the article

  • Myths about Coding Craftsmanship part 2

    - by tom
    Myth 3: The source of all bad code is inept developers and stupid people When you review code is this what you assume?  Shame on you.  You are probably making assumptions in your code if you are assuming so much already.  Bad code can be the result of any number of causes including but not limited to using dated techniques (like boxing when generics are available), not following standards (“look how he does the spacing between arguments!” or “did he really just name that variable ‘bln_Hello_Cats’?”), being redundant, using properties, methods, or objects in a novel way (like switching on button.Text between “Hello World” and “Hello World “ //clever use of space character… sigh), not following the SOLID principals, hacking around assumptions made in earlier iterations / hacking in features that should be worked into the overall design.  The first two issues, while annoying are pretty easy to spot and can be fixed so easily.  If your coding team is made up of experienced professionals who are passionate about staying current then these shouldn’t be happening.  If you work with a variety of skills, backgrounds, and experience then there will be some of this stuff going on.  If you have an opportunity to mentor such a developer who is receptive to constructive criticism don’t be a jerk; help them and the codebase will improve.  A little patience can improve the codebase, your work environment, and even your perspective. The novelty and redundancy I have encountered has often been the use of creativity when language knowledge was perceived as unavailable or too time consuming.  When developers learn on the job you get a lot of this.  Rather than going to MSDN developers will use what they know.  Depending on the constraints of their assignment hacking together what they know may seem quite practical.  This was not stupid though I often wonder how much time is actually “saved” by hacking.  These issues are often harder to untangle if we ever do.  They can also grow out of control as we write hack after hack to make it work and get back to some development that is satisfying. Hacking upon an existing hack is what I call “feeding the monster”.  Code monsters are anti-patterns and hacks gone wild.  The reason code monsters continue to get bigger is that they keep growing in scope, touching more and more of the application.  This is not the result of dumb developers. It is probably the result of avoiding design, not taking the time to understand the problems or anticipate or communicate the vision of the product.  If our developers don’t understand the purpose of a feature or product how do we expect potential customers to do so? Forethought and organization are often what is missing from bad code.  Developers who do not use the SOLID principals should be encouraged to learn these principals and be given guidance on how to apply them.  The time “saved” by giving hackers room to hack will be made up for and then some. Not as technical debt but as shoddy work that if not replaced will be struggled with again and again.  Bad code is not the result of dumb developers (usually) it is the result of trying to do too much without the proper resources and neglecting the right thing that needs doing with the first thoughtless thing that comes into our heads. Object oriented code is all about relationships between objects.  Coders who believe their coworkers are all fools tend to write objects that are difficult to work with, not eager to explain themselves, and perform erratically and irrationally.  If you constantly find you are surrounded by idiots you may want to ask yourself if you are being unreasonable, if you are being closed minded, of if you have chosen the right profession.  Opening your mind up to the idea that you probably work with rational, well-intentioned people will probably make you a better coder and it might even make you less grumpy.  If you are surrounded by jerks who do not engage in the exchange of ideas who do not care about their customers or the durability of the code you are building together then I suggest you find a new place to work.  Myth 4: Customers don’t care about “beautiful” code Craftsmanship is customer focused because it means that the job was done right, the product will withstand the abuse, modifications, and scrutiny of our customers.  Users can appreciate a predictable timeline for a release, a product delivered on time and on budget, a feature set that does not interfere with the task(s) it is supporting, quick turnarounds on exception messages, self healing issues, and less issues.  These are all hindered by skimping on craftsmanship.  When we write data access and when we write reusable code.   What do you think?  Does bad code come primarily from low IQ individuals?  Do customers care about beautiful code?

    Read the article

  • Craftsmanship Tour Day 1: Didit Long Island

    - by Liam McLennan
    On Monday I was at Didit for my first ever craftsmanship visit. Didit seem to occupy a good part of a non-descript building in Rockville Centre Long Island. Since I had arrived early from Seattle I had some time to kill, so I stopped at the Rockville Diner on the corner of N Park Ave and Sunrise Hwy. I thoroughly enjoyed the pancakes and the friendly service. After walking to the Didit office I met Rik Dryfoos, the Didit Engineering Manager who organised my visit, and got the introduction to Didit and the work they are doing. I spent the morning in the room shared by the Didit developers, who are working on some fascinating deep engineering problems. After lunch at a local Thai place I setup a webcam to record an interview with Rik and Matt Roman (Didit VP of Engineering). I had a lot of trouble with the webcam, including losing several minutes of conversation, but in the end I was very happy the result. Here are the full interviews with Rik and Matt: Interview with Rik Dryfoos Interview with Matt Roman We had a great chat, much of which is captured in the recording. It was such great conversation that I almost missed my train to Manhattan. I’m sure Didit will continue to do well with such a dedicated and enthusiastic team. I sincerely thank them for hosting me for the day. If you are looking for a true agile environment and the opportunity to work with a high quality team then you should talk to Didit.

    Read the article

  • Clean Code: A Handbook of Agile Software Craftsmanship – book review

    - by DigiMortal
       Writing code that is easy read and test is not something that is easy to achieve. Unfortunately there are still way too much programming students who write awful spaghetti after graduating. But there is one really good book that helps you raise your code to new level – your code will be also communication tool for you and your fellow programmers. “Clean Code: A Handbook of Agile Software Craftsmanship” by Robert C. Martin is excellent book that helps you start writing the easily readable code. Of course, you are the one who has to learn and practice but using this book you have very good guide that keeps you going to right direction. You can start writing better code while you read this book and you can do it right in your current projects – you don’t have to create new guestbook or some other simple application to start practicing. Take the project you are working on and start making it better! My special thanks to Robert C. Martin I want to say my special thanks to Robert C. Martin for this book. There are many books that teach you different stuff and usually you have markable learning curve to go before you start getting results. There are many books that show you the direction to go and then leave you alone figuring out how to achieve all that stuff you just read about. Clean Code gives you a lot more – the mental tools to use so you can go your way to clean code being sure you will be soon there. I am reading books as much as I have time for it. Clean Code is top-level book for developers who have to write working code. Before anything else take Clean Code and read it. You will never regret your decision. I promise. Fragment of editorial review “Even bad code can function. But if code isn’t clean, it can bring a development organization to its knees. Every year, countless hours and significant resources are lost because of poorly written code. But it doesn’t have to be that way. What kind of work will you be doing? You’ll be reading code—lots of code. And you will be challenged to think about what’s right about that code, and what’s wrong with it. More importantly, you will be challenged to reassess your professional values and your commitment to your craft. Readers will come away from this book understanding How to tell the difference between good and bad code How to write good code and how to transform bad code into good code How to create good names, good functions, good objects, and good classes How to format code for maximum readability How to implement complete error handling without obscuring code logic How to unit test and practice test-driven development This book is a must for any developer, software engineer, project manager, team lead, or systems analyst with an interest in producing better code.” Table of contents Clean code Meaningful names Functions Comments Formatting Objects and data structures Error handling Boundaries Unit tests Classes Systems Emergence Concurrency Successive refinement JUnit internals Refactoring SerialDate Smells and heuristics A Concurrency II org.jfree.date.SerialDate Cross references of heuristics Epilogue Index

    Read the article

  • Which specific practices could be called "software craftsmanship" rather than "software engineering"?

    - by FinnNk
    Although not a new idea there seems to have been a big increase in the interest in software craftsmanship over the last couple of years (notably the often recommended book Clean Code's full title is Clean Code: A Handbook of Agile Software Craftsmanship). Personally I see software craftsmanship as good software engineering with an added interest in ensuring that the end result is a joy to work with (both as an end user and as someone maintaining that software) - and also that its focus is more at the coding level of things than the higher level process things. To draw an analogy - there were lots of buildings constructed in the 50s and 60s in a very modern style which took very little account of the people who would be living in them or how those buildings would age over time. Many of those buildings rapidly developed into slums or have been demolished long before their expected lifespans. I'm sure most developers with a few years under their belts will have experienced similar codebases. What are the specific things that a software craftsman might do that a software engineer (possibly a bad one) might not?

    Read the article

  • What should you bring to the table as a Software Architect?

    - by Ahmad Mageed
    There have been many questions with good answers about the role of a Software Architect (SA) on StackOverflow and Programmers SE. I am trying to ask a slightly more focused question than those. The very definition of a SA is broad so for the sake of this question let's define a SA as follows: A Software Architect guides the overall design of a project, gets involved with coding efforts, conducts code reviews, and selects the technologies to be used. In other words, I am not talking about managerial rest and vest at the crest (further rhyming words elided) types of SAs. If I were to pursue any type of SA position I don't want to be away from coding. I might sacrifice some time to interface with clients and Business Analysts etc., but I am still technically involved and I'm not just aware of what's going on through meetings. With these points in mind, what should a SA bring to the table? Should they come in with a mentality of "laying down the law" (so to speak) and enforcing the usage of certain tools to fit "their way," i.e., coding guidelines, source control, patterns, UML documentation, etc.? Or should they specify initial direction and strategy then be laid back and jump in as needed to correct the ship's direction? Depending on the organization this might not work. An SA who relies on TFS to enforce everything may struggle to implement their plan at an employer that only uses StarTeam. Similarly, an SA needs to be flexible depending on the stage of the project. If it's a fresh project they have more choices, whereas they might have less for existing projects. Here are some SA stories I have experienced as a way of sharing some background in hopes that answers to my questions might also shed some light on these issues: I've worked with an SA who code reviewed literally every single line of code of the team. The SA would do this for not just our project but other projects in the organization (imagine the time spent on this). At first it was useful to enforce certain standards, but later it became crippling. FxCop was how the SA would find issues. Don't get me wrong, it was a good way to teach junior developers and force them to think of the consequences of their chosen approach, but for senior developers it was seen as somewhat draconian. One particular SA was against the use of a certain library, claiming it was slow. This forced us to write tons of code to achieve things differently while the other library would've saved us a lot of time. Fast forward to the last month of the project and the clients were complaining about performance. The only solution was to change certain functionality to use the originally ignored approach despite early warnings from the devs. By that point a lot of code was thrown out and not reusable, leading to overtime and stress. Sadly the estimates used for the project were based on the old approach which my project was forbidden from using so it wasn't an appropriate indicator for estimation. I would hear the PM say "we've done this before," when in reality they had not since we were using a new library and the devs working on it were not the same devs used on the old project. The SA who would enforce the usage of DTOs, DOs, BOs, Service layers and so on for all projects. New devs had to learn this architecture and the SA adamantly enforced usage guidelines. Exceptions to usage guidelines were made when it was absolutely difficult to follow the guidelines. The SA was grounded in their approach. Classes for DTOs and all CRUD operations were generated via CodeSmith and database schemas were another similar ball of wax. However, having used this setup everywhere, the SA was not open to new technologies such as LINQ to SQL or Entity Framework. I am not using this post as a platform for venting. There were positive and negative aspects to my experiences with the SA stories mentioned above. My questions boil down to: What should an SA bring to the table? How can they strike a balance in their decision making? Should one approach an SA job (as defined earlier) with the mentality that they must enforce certain ground rules? Anything else to consider? Thanks! I'm sure these job tasks are easily extended to people who are senior devs or technical leads, so feel free to answer at that capacity as well.

    Read the article

  • What is the path to JavaScript mastery?

    - by Eric Wilson
    I know how we start with JavaScript, we cut-and-paste a snippit to gain a little client-side functionality or validation. But if you follow this path in trying to implement rich interactive behavior, it doesn't take long before you realize that you are creating a Big Ball Of Mud. So what is the path towards expertise in programming the interaction layer? What books, tutorials, exercises, and processes contribute towards the ability to program robust, maintainable JavaScript? We all know that practice is important in any endeavor, but I'm looking for a path similar to the answer here: http://stackoverflow.com/questions/2573135/

    Read the article

  • General List of Common Programming Errors

    - by javamonkey79
    As one journey's from apprentice to journeyman to master I've noticed that one accumulates a list of best practices for things they've been bitten by. Personally, I write most of my stuff in java & SQL so my list tends to be slated towards them. I've accumulated the following: When doing list removal, always reverse iterate Avoid adding items to a list you are currently iterating on Watch out for NullPointerExceptions Now, I know there are language specific "common errors" links out there like this one. And I'm also aware of the pragmatic programmer tips, Martin Fowler's "code smells". Does anyone know of any good lists out there of things like I've listed above (re: list removal, adding items, etc). My guess is that there are some good QA folks out there that can probably throw me a bone here. I'm not looking for things the compiler can catch - I'm looking for common things that cause bugs. In the event that there isn't a list out there already then I welcome posting your own findings here. Thanks in advance!

    Read the article

  • Deep diving into open source code

    - by Raspar
    When do you feel that it's appropriate/necessary to take deeper dives into the source code of open source tools to gain an understanding of the toolsets that you use? (nHibernate, StructureMap, Rhino Mocks, etc.)

    Read the article

  • Thou shalt not put code on a piedestal - Code is a tool, no more, no less

    - by Ralf Westphal
    “Write great code and everything else becomes easier” is what Paul Pagel believes in. That´s his version of an adage by Brian Marick he cites: “treat code as an end, not just a means.” And he concludes: “My post-Agile world is software craftsmanship.” I wonder, if that´s really the way to go. Will “simply” writing great code lead the software industry into the light? He´s alluding to the philosopher Kant who proposed, a human beings should never be treated as a means, but always as an end. But should we transfer this ethical statement into the world of software? I doubt it.   Reason #1: Human beings are categorially different from code. They are autonomous entities who need to find a way of living happily together. To Kant it seemed this goal could only be reached if nobody (ab)used a human being for his/her purposes. Because using a human being, i.e. treating it as a means, would contradict the fundamental autonomy and freedom of human beings. People should hold up a symmetric view of their relationships: Since nobody wants to be (ab)used, nobody should (ab)use anybody else. If you want to be treated decently, with respect, in accordance with your own free will - which means as an end - then do the same to other people. Code is dead, it´s a product, it´s a tool for people to reach their goals. No company spends any money on code other than to save money or earn money in the long run. Code is not a puppy. Enterprises do not commission software development to just feel good in its company. Code is not a buddy. Code is a slave, if you will. A mechanical slave, a non-tangible robot. Code is a tool, is a tool. And if we start to treat it differently, if we elevate its status unduely… I guess that will contort our relationship in a contraproductive way. Please get me right: Just because something is “just a tool”, “just a product” does not mean we should not be careful while designing, building, using it. Right to the contrary. We should be very careful when writing code – but not for the code´s sake! We should be careful because we respect our customers who are fellow human beings who should be treated as an end. If we are careless, neglectful, ignorant when producing code on their behalf, then we´re using them. Being sloppy means you´re caring more for yourself that for your customer. You´re then treating the customer as a means to fulfill some of your own needs. That´s plain unethical behavior.   Reason #2: The focus should always be on your purpose, not on any tool. But if code is treated as an end, then the focus is on the code. That might sound right, because where else should be your focus as a software developer? But, well, I´d say, your focus should be on delivering value to your customer. Because in the end your customer does not care if you write a single line of code. She just wants her problem to be solved. Solving problems is the purpose of any contractor. Code must be treated just as a means, a tool we know how to handle very well. But if we´re really trying to be craftsmen then we should be conscious about exactly that and act ethically. That means we must never be so focused on our tool as to be unable to suggest better solutions to the problems of our customers than code.   I´m all with Paul when he urges us to “Write great code”. Sure, if you need to write code, then by all means do so. Write the best code you can think of – and then try to improve it. Paul has all the best intentions when he signs Brians “treat code as an end” - but as we all know: “The road to hell is paved with best intentions” ;-) Yes, I can imagine a “hell of code focus”. In fact, I don´t need to imagine it, I´m seeing it quite often. Because code hell is whereever two developers stand together and are so immersed in talking about all sorts of coding tricks, design patterns, code smells, technologies, platforms, tools that they lose sight of the big picture. Talking about TDD or SOLID or refactoring is a sign of consciousness – relative to the “cowboy coders” view of the world. But from yet another point of view TDD, SOLID, and refactoring are just cures for ailments within a system. And I fear, if “Writing great code” is the only focus or the main focus of software development, then we as an industry lose the ability to see that. Focus draws a line around something, it defines a horizon for perceptions and thinking. So if we focus on code our horizon ends where “the land of code” ends. I don´t think that should be our professional attitude.   So what about Software Craftsmanship as the next big thing after Agility? I think Software Craftsmanship has an important message for all software developers and beyond. But to make it the successor of the Agility movement seems to miss a point. Agility never claimed to solve all software development problems, I´d say. So to blame it for having missed out on certain aspects of it is wrong. If I had to summarize Agility in one word I´d say “Value”. Agility put value for the customer back in software development. Focus on delivering value early and often – that´s Agility´s mantra. All else follows from that. And I ask you: Is that obsolete? Is delivering value not hip anymore? No, sure not. That´s our very purpose as software developers. So how can Agility become obsolete and need to be replaced? We need to do away with this “either/or”-thinking. It´s either Agility or Lean or Software Craftsmanship or whatnot. Instead we should start integrating concepts and movements. Think “both/and”. Think Agility plus Software Craftsmanship plus Lean plus whatnot. We don´t neet to tear down anything from a piedestal and replace it with a new idol. Instead we should do away with piedestals and arrange whatever is helpful is a circle. Then we can turn to concepts, movements for whatever they are best. After 10 years of Agility we should be able to identify what it was good at – and keep that. Keep Agility around and add whatever Agility was lacking or never concerned with. Add whatever is at the core of Software Craftsmanship. Add whatever is at the core of Lean etc. But don´t call out the age of Post-Agility. Because it better never will end. Because once we start to lose Agility´s core we´re losing focus of the customer.

    Read the article

  • Communities - The importance of exchange and discussion

    Communication with your environment is an essential part of everyone's life. And it doesn't matter whether you are actually living in a rural area in the middle of nowhere, within the pulsating heart of a big city, or in my case on a wonderful island in the Indian Ocean. The ability to exchange your thoughts, your experience and your worries with another person helps you to get different points of view and new ideas on how to resolve an issue you might be confronted with. Benefits of community work What happens to be common sense in your daily life, also applies to your work environment. Working in IT, or ICT as it is called in Mauritius, requires a lot of reading and learning. Not only during your lectures at the university but with your colleagues in a project assignment and hopefully with 'unknown' pals in the universe of online communities. At least I can say that I learned quite a lot from other developers code, their responses in various forums, their numerous blog articles, and while attending local user group meetings. When I started to work as a professional software developer (or engineer some may say) years ago I immediately checked the existence of communities on the programming language, the database technology and other vital information on software development in general. Luckily, it wasn't too difficult to find. My employer had a subscription of the monthly magazines and newsletters of a national organisation which also run the biggest forum in that area. Getting in touch with other developers and reading their common problems but also solutions was a huge benefit to my growth. Image courtesy of Michael Kappel (CC BY-NC 2.0) Active participation and regular contribution to this community gave me some nice advantages, too. Within three years I was listed as a conference speaker at the annual developer's conference and provided several sessions on different topics during consecutive years. Back in 2004, I took over the responsibility and management of the monthly meetings of a regional user group, and organised it for more than two years. Furthermore, I was invited to the newly-founded community program of Microsoft Germany (Community Leader/Insider Program - CLIP). My website on Active FoxPro Pages was nominated in the second batch of online communities. Due to my community work and providing advice to others, I had the honour to be awarded as Microsoft Most Valuable Professional (MVP) - Visual Developer for Visual FoxPro in the years 2006 and 2007. It was a great experience to meet with other like-minded people and I'm really grateful for that. Just in case, more details are listed in my Curriculum Vitae. But this all changed when I moved to Mauritius... Cyber island Mauritius? During the first months in Mauritius I was way too busy to think about community activities at all. First of all, there was the new company that had to be set up, the new staff had to be trained and of course the communication work-flows and so on with the project managers back in Germany had to be sorted out, too. Second, I had to get a grip of my private matters like getting the basics for my new household or exploring the neighbourhood, and last but not least I needed a break from the hectic and intensive work prior to my departure. As soon as the sea literally calmed down, I started to have conversations with my colleagues about communities and user groups. Sadly, it turned out that there were none, or at least no one was aware of any at that time. Oh oh, what did I do? Anyway, having this kind of background and very positive experience with off-line and on-line activities I decided for myself that some day I'm going to found a community in Mauritius for all kind of IT/ICT-related fields. The main focus might be on software development but not on a certain technology or methodology. It was clear to me that it should be an open infrastructure and anyone is welcome to join, to experience, to share and to contribute if they would like to. That was the idea at that time... Ok, fast-forward to recent events. At the end of October 2012 I was invited to an event called Open Days organised by Microsoft Indian Ocean Islands together with other local partners and resellers. There I got in touch with local Technical Evangelist Arnaud Meslier and we had a good conversation on communities during the breaks. Eventually, I left a good impression on him, as we are having chats on Facebook or Skype irregularly. Well, seeing that my personal and professional surroundings have been settled and running smooth, having that great exchange and contact with Microsoft IOI (again), and being really eager to re-animate my intentions from 2007, I recently founded a new community: Mauritius Software Craftsmanship Community - #MSCC It took me a while to settle down with the name but it was obvious that the community should not be attached to one single technology, like ie. .NET user group, Oracle developers, or Joomla friends (these are fictitious names). There are several other reasons why I came up with 'Craftsmanship' as the core topic of this community. The expression of 'engineering' didn't feel right with the fields covered. Software development in all kind of facets is a craft, and therefore demands a lot of practice but also guidance from more experienced developers. It also includes the process of designing, modelling and drafting the ideas. Has to deal with various types of tests and test methodologies, and of course should be focused on flexible and agile ways of acting. In order to meet and to excel a customer's request for a solution. Next, I was looking for an easy way to handle the organisation of events and meeting appointments. Using all kind of social media platforms like Google+, LinkedIn, Facebook, Xing, etc. I was never really confident about their features of event handling. More by chance I stumbled upon Meetup.com and in combination with the other entities (G+ Communities, FB Pages or in Groups) I am looking forward to advertise and manage all future activities here: Mauritius Software Craftsmanship Community This is a community for those who care and are proud of what they do. For those developers, regardless how experienced they are, who want to improve and master their craft. This is a community for those who believe that being average is just not good enough. I know, there are not many 'craftsmen' yet but it's a start... Let's see how it looks like by the end of the year. There are free smartphone apps for Android and iOS from Meetup.com that allow you to keep track of meetings and to stay informed on latest updates. And last but not least, there will be a Trello workspace to collect and share ideas and provide downloads of slides, etc. Sharing is caring! As mentioned, the #MSCC is present in various social media networks in order to cover as many people as possible here in Mauritius. Following is an overview of the current networks: Twitter - Latest updates and quickies Google+ - Community channel Facebook - Community Page LinkedIn - Community Group Trello - Collaboration workspace to share and develop ideas Hopefully, this covers the majority of computer-related people in Mauritius. Please spread the word about the #MSCC between your colleagues, your friends and other interested 'geeks'. Your future looks bright Running and participating in a user group or any kind of community usually provides quite a number of advantages for anyone. On the one side it is very joyful for me to organise appointments and get in touch with people that might be interested to present a little demo of their projects or their recent problems they had to tackle down, and on the other side there are lots of companies that have various support programs or sponsorships especially tailored for user groups. At the moment, I already have a couple of gimmicks that I would like to hand out in small contests or raffles during one of the upcoming meetings, and as said, companies provide all kind of goodies, books free of charge, or sometimes even licenses for communities. Meeting other software developers or IT guys also opens up your point of view on the local market and there might be interesting projects or job offers available, too. A community like the Mauritius Software Craftsmanship Community is great for freelancers, self-employed, students and of course employees. Meetings will be organised on a regular basis, and I'm open to all kind of suggestions from you. Please leave a comment here in blog or join the conversations in the above mentioned social networks. Let's get this community up and running, my fellow Mauritians!

    Read the article

  • At what point would you drop some of your principles of software development for the sake of more money?

    - by MeshMan
    I'd like to throw this question out there to interestingly see where the medium is. I'm going to admit that in my last 12 months, I picked up TDD and a lot of the Agile values in software development. I was so overwhelmed with how much better my development of software became that I would never drop them out of principle. Until...I was offered a contracting role that doubled my take home pay for the year. The company I joined didn't follow any specific methodology, the team hadn't heard of anything like code smells, SOLID, etc., and I certainly wasn't going to get away with spending time doing TDD if the team had never even seen unit testing in practice. Am I a sell out? No, not completely... Code will always been written "cleanly" (as per Uncle Bob's teachings) and the principles of SOLID will always be applied to the code that I write as they are needed. Testing was dropped for me though, the company couldn't afford to have such a unknown handed to the team who quite frankly, even I did create test frameworks, they would never use/maintain the test framework correctly. Using that as an example, what point would you say a developer should never drop his craftsmanship principles for the sake of money/other benefits to them personally? I understand that this can be a very personal opinion on how concerned one is to their own needs, business needs, and the sake of craftsmanship etc. But one can consider that for example testing can be dropped if the company decided they would rather have a test team, than rather understand unit testing in programming, would that be something you could forgive yourself for like I did? So given that there is something you would drop, there usually should be an equal cost in the business that makes up for what you drop - hopefully, unless of course you are pretty much out for lining your own pockets and not community/social collaborating ;). Double your money, go back to RAD? Or walk on, and look for someone doing Agile, and never look back...

    Read the article

  • Executable Resumes

    - by Liam McLennan
    Over the past twelve months I have been thinking a lot about executable specifications. Long considered the holy grail of agile software development, executable specifications means expressing a program’s functionality in a way that is both readable by the customer and computer verifiable in an automatic, repeatable way. With the current generation of BDD and ATDD tools executable specifications seem finally within the reach of a significant percentage of the development community. Lately, and partly as a result of my craftsmanship tour, I have decided that soon I am going to have to get a job (gasp!). As Dave Hoover describes in Apprenticeship Patters, “you … have mentors and kindred spirits that you meet with periodically, [but] when it comes to developing software, you work alone.” The time may have come where the only way for me to feel satisfied and enriched by my work is to seek out a work environment where I can work with people smarter and more knowledgeable than myself. Having been on both sides of the interview desk many times I know how difficult and unreliable the process can be. Therefore, I am proposing the idea of executable resumes. As a journeyman programmer looking for a fruitful work environment I plan to write an application that demonstrates my understanding of the state of the art. Potential employers can download, view and execute my executable resume and judge wether my aesthetic sensibility matches their own. The concept of the executable resume is based upon the following assertion: A line of code answers a thousand interview questions Asking people about their experiences and skills is not a direct way of assessing their value to your organisation. Often it simple assesses their ability to mislead an interviewer. An executable resume demonstrates: The highest quality code that the person is able to produce. That the person is sufficiently motivated to produce something of value in their own time. That the person loves their craft. The idea of publishing a program to demonstrate a developer’s skills comes from Rob Conery, who suggested that each developer should build their own blog engine since it is the public representation of their level of mastery. Rob said: Luke had to build his own lightsaber – geeks should have to build their own blogs. And that should be their resume. In honour of Rob’s inspiration I plan to build a blog engine as my executable resume. While it is true that the world does not need another blog engine it is as good a project as any, it is a well understood domain, and I have not found an existing blog engine that I like. Executable resumes fit well with the software craftsmanship metaphor. It is not difficult to imagine that under the guild system master craftsmen may have accepted journeymen based on the quality of the work they had produced in the past. We now understand that when it comes to the functionality of an application that code is the final arbiter. Why not apply the same rule to hiring?

    Read the article

  • We have completed our 100th recording!

    - by van
    Well we did it.  We made our 100th recording.  It also had a record breaking attendance of over 100 attendees. So check it out, our 100th recording on Software Craftsmanship with Robert Martin. Thanks for everyone's help and support over the last few years. Zachariah Young http://virtualaltnet.com

    Read the article

  • Do software developers know what engineers actually do?

    - by lorin
    Software development is often contrasted with the traditional branches of engineering, most commonly civil or mechanical engineering. For example: "Software development isn't like engineering, it's like craftsmanship!" "Software development isn't like engineering, but it should be!" Do software developers understand what it is that engineers do and how they do it? At least, do they understand it well enough to be able to make an informed comparison with what software developers do?

    Read the article

  • Stop trying to be perfect

    - by Kyle Burns
    Yes, Bob is my uncle too.  I also think the points in the Manifesto for Software Craftsmanship (manifesto.softwarecraftsmanship.org) are all great.  What amazes me is that tend to confuse the term “well crafted” with “perfect”.  I'm about to say something that will make Quality Assurance managers and many development types as well until you think about it as a craftsman – “Stop trying to be perfect”. Now let me explain what I mean.  Building software, as with building almost anything, often involves a series of trade-offs where either one undesired characteristic is accepted as necessary to achieve another desired one (or maybe stave off one that is even less desirable) or a desirable characteristic is sacrificed for the same reasons.  This implies that perfection itself is unattainable.  What is attainable is “sufficient” and I think that this really goes to the heart both of what people are trying to do with Agile and with the craftsmanship movement.  Simply put, sufficient software drives the greatest business value.   I've been in many meetings where “how can we keep anything from ever going wrong” has become the thing that holds us in analysis paralysis.  I've also been the guy trying way too hard to perfect some function to make sure that every edge case is accounted for.  Somewhere in there, something a drill instructor said while I was in boot camp occurred to me.  In response to being asked a question by another recruit having to do with some edge case (I can barely remember the context), he said “What if grasshoppers had machine guns?  Would the birds still **** with them?”  It sounds funny, but there's a lot of wisdom in those words.   “Sufficient” is different for every situation and it’s important to understand what sufficient means in the context of the work you’re doing.  If I’m writing a timesheet application (and please shoot me if I am), I’m going to have a much higher tolerance for imperfection than if you’re writing software to control life support systems on spacecraft.  I’m also likely to have less need for high volume performance than if you’re writing software to control stock trading transactions.   I’d encourage anyone who has read this far to instead of trying to be perfect, try to create software that is sufficient in every way.  If you’re working to make a component that is sufficient “better”, ask yourself if there is any component left that is not yet sufficient.  If the answer is “yes” you’re working on the wrong thing and need to adjust.  If the answer is “no”, why aren’t you shipping and delivering business value?

    Read the article

1 2 3  | Next Page >