Search Results

Search found 56 results on 3 pages for 'darryl braaten'.

Page 1/3 | 1 2 3  | Next Page >

  • Programmez un jeu pour téléphone portable avec MIDlet Pascal, par Darryl Kpizingui

    Darryl Kpizingui signe, avec ce tutoriel, le troisième volet de la série d'articles consacrés au compilateur MIDlet Pascal, qui permet de créer des programmes pour téléphones portables. Il nous guide pas à pas dans la réalisation d'un logiciel complet, un jeu de Mario Sokoban. Vous avez à présent toutes les cartes en main pour vous lancer dans la réalisation de vos propres logiciels pour téléphones portables !

    Read the article

  • java.net.SocketException: Connection reset

    - by Darryl
    I am getting the following error trying to read from a socket. I'm doing a readInt() on that InputStream, and I am getting this error. Perusing the documentation this suggests that the client part of the connection closed the connection. In this scenario, I am the server. I have access to the client log files and it is not closing the connection, and in fact its log files suggest I am closing the connection. So does anybody have an idea why this is happening? What else to check for? Does this arise when there are local resources that are perhaps reaching thresholds? Many thanks, Darryl

    Read the article

  • Oracle tuning optimizer index cost adj and optimizer index caching

    - by Darryl Braaten
    What is the correct way to set the optimizer index cost adj parameter for Oracle. As a developer I have observed huge performance improvements as this parameter is lowered. Common queries are reduced from 2 seconds to 200ms. There are lots of warnings on the net that lowering this value will cause dire issues with the database, but no detail is given on what will start going wrong. I am currently only seeing only an upside, much improved application performance and no downside. I need to better understand the possible negative repercussions of adjusting these parameters.

    Read the article

  • On which crowdsourced design site have you the best experience? (ie, crowdspring, mycroburst, etc)

    - by Darryl Hein
    I wasn't sure which site to ask this on (as Graphic Design hasn't reached beta yet), so I thought I would try here. I'm looking to have a couple logos and website designs done. I've had some great local designers, but each one has moved or gone else where so I keep having to look for new designers. My thought and realization in the last couple days is to go to a crowdsourced design site like crowdspring.com or mycroburst.com. Both of these sites look good, but I'm wondering what else is out there? Are there better ones and how have your experiences been them?

    Read the article

  • CON6714 - Mixed-Language Development: Leveraging Native Code from Java

    - by Darryl Gove
    Here's the abstract from my JavaOne talk: There are some situations in which it is necessary to call native code (C/C++ compiled code) from Java applications. This session describes how to do this efficiently and how to performance-tune the resulting applications. The objectives for the session are: Explain reasons for using native code in Java applications Describe pitfalls of calling native code from Java Discuss performance-tuning of Java apps that use native code I'll cover how to call native code from Java, debugging native code, and then I'll dig into performance tuning the code. The talk is not going too deep on performance tuning - focusing on the JNI specific topics; I'll do a bit more about performance tuning in my OpenWorld talk later in the day.

    Read the article

  • Current SPARC Architectures

    - by Darryl Gove
    Different generations of SPARC processors implement different architectures. The architecture that the compiler targets is controlled implicitly by the -xtarget flag and explicitly by the -arch flag. If an application targets a recent architecture, then the compiler gets to play with all the instructions that the new architecture provides. The downside is that the application won't work on older processors that don't have the new instructions. So for developer's there is a trade-off between performance and portability. The way we have solved this in the compiler is to assume a "generic" architecture, and we've made this the default behaviour of the compiler. The only flag that doesn't make this assumption is -fast which tells the compiler to assume that the build machine is also the deployment machine - so the compiler can use all the instructions that the build machine provides. The -xtarget=generic flag tells the compiler explicitly to use this generic model. We work hard on making generic code work well across all processors. So in most cases this is a very good choice. It is also of interest to know what processors support the various architectures. The following Venn diagram attempts to show this: A textual description is as follows: The T1 and T2 processors, in addition to most other SPARC processors that were shipped in the last 10+ years supported V9b, or sparcvis2. The SPARC64 processors from Fujitsu, used in the M-series machines, added support for the floating point multiply accumulate instruction in the sparcfmaf architecture. Support for this instruction also appeared in the T3 - this is called sparcvis3 Later SPARC64 processors added the integer multiply accumulate instruction, this architecture is sparcima. Finally the T4 includes support for both the integer and floating point multiply accumulate instructions in the sparc4 architecture. So the conclusion should be: Floating point multiply accumulate is supported in both the T-series and M-series machines, so it should be a relatively safe bet to start using it. The T4 is a very good machine to deploy to because it supports all the current instruction sets.

    Read the article

  • Efficient inline templates and C++

    - by Darryl Gove
    I've talked before about calling inline templates from C++, I've also talked about calling inline templates efficiently. This time I want to talk about efficiently calling inline templates from C++. The obvious starting point is that I need to declare the inline templates as being extern "C": extern "C" { int mytemplate(int); } This enables us to call it, but the call may not be very efficient because the compiler will treat it as a function call, and may produce suboptimal code based on that premise. So we need to add the no_side_effect pragma: extern "C" { int mytemplate(int); #pragma no_side_effect(mytemplate) } However, this may still not produce optimal code. We've discussed how the no_side_effect pragma cannot be combined with exceptions, well we know that the code cannot produce exceptions, but the compiler doesn't know that. If we tell the compiler that information it may be able to produce even better code. We can do this by adding the "throw()" keyword to the template declaration: extern "C" { int mytemplate(int) throw(); #pragma no_side_effect(mytemplate) } The following is an example of how these changes might improve performance. We can take our previous example code and migrate it to C++, adding the use of a try...catch construct: #include <iostream extern "C" { int lzd(int); #pragma no_side_effect(lzd) } int a; int c=0; class myclass { int routine(); }; int myclass::routine() { try { for(a=0; a<1000; a++) { c=lzd(c); } } catch(...) { std::cout << "Something happened" << std::endl; } return 0; } Compiling this produces a slightly suboptimal code sequence in the hot loop: $ CC -O -xtarget=T4 -S t.cpp t.il ... /* 0x0014 23 */ lzd %o0,%o0 /* 0x0018 21 */ add %l6,1,%l6 /* 0x001c */ cmp %l6,1000 /* 0x0020 */ bl,pt %icc,.L77000033 /* 0x0024 23 */ st %o0,[%l7] There's a store in the delay slot of the branch, so we're repeatedly storing data back to memory. If we change the function declaration to include "throw()", we get better code: $ CC -O -xtarget=T4 -S t.cpp t.il ... /* 0x0014 21 */ add %i1,1,%i1 /* 0x0018 23 */ lzd %o0,%o0 /* 0x001c 21 */ cmp %i1,999 /* 0x0020 */ ble,pt %icc,.L77000019 /* 0x0024 */ nop The store has gone, but the code is still suboptimal - there's a nop in the delay slot rather than useful work. However, it's good enough for this example. The point I'm making is that the compiler produces the better code with both the "throw()" and the no side effect pragma.

    Read the article

  • Pragmas and exceptions

    - by Darryl Gove
    The compiler pragmas: #pragma no_side_effect(routinename) #pragma does_not_write_global_data(routinename) #pragma does_not_read_global_data(routinename) are used to tell the compiler more about the routine being called, and enable it to do a better job of optimising around the routine. If a routine does not read global data, then global data does not need to be stored to memory before the call to the routine. If the routine does not write global data, then global data does not need to be reloaded after the call. The no side effect directive indicates that the routine does no I/O, does not read or write global data, and the result only depends on the input. However, these pragmas should not be used on routines that throw exceptions. The following example indicates the problem: #include <iostream extern "C" { int exceptional(int); #pragma no_side_effect(exceptional) } int exceptional(int a) { if (a==7) { throw 7; } else { return a+1; } } int a; int c=0; class myclass { public: int routine(); }; int myclass::routine() { for(a=0; a<1000; a++) { c=exceptional(c); } return 0; } int main() { myclass f; try { f.routine(); } catch(...) { std::cout << "Something happened" << a << c << std::endl; } } The routine "exceptional" is declared as having no side effects, however it can throw an exception. The no side effects directive enables the compiler to avoid storing global data back to memory, and retrieving it after the function call, so the loop containing the call to exceptional is quite tight: $ CC -O -S test.cpp ... .L77000061: /* 0x0014 38 */ call exceptional ! params = %o0 ! Result = %o0 /* 0x0018 36 */ add %i1,1,%i1 /* 0x001c */ cmp %i1,999 /* 0x0020 */ ble,pt %icc,.L77000061 /* 0x0024 */ nop However, when the program is run the result is incorrect: $ CC -O t.cpp $ ./a.out Something happend00 If the code had worked correctly, the output would have been "Something happened77" - the exception occurs on the seventh iteration. Yet, the current code produces a message that uses the original values for the variables 'a' and 'c'. The problem is that the exception handler reads global data, and due to the no side effects directive the compiler has not updated the global data before the function call. So these pragmas should not be used on routines that have the potential to throw exceptions.

    Read the article

  • Providing feedback on the Solaris Studio 12.4 Beta

    - by Darryl Gove
    Obviously, the point of the Solaris Studio 12.4 Beta programme was for everyone to try out the new version of the compiler and tools, and for us to gather feedback on what was working, what was broken, and what was missing. We've had lots of useful feedback - you can see some of it on the forums. But we're after more. Hence we have a Solaris Studio 12.4 Beta survey where you can tell us more about your experiences. Your comments are really helpful to us. Thanks.

    Read the article

  • Library order is important

    - by Darryl Gove
    I've written quite extensively about link ordering issues, but I've not discussed the interaction between archive libraries and shared libraries. So let's take a simple program that calls a maths library function: #include <math.h int main() { for (int i=0; i<10000000; i++) { sin(i); } } We compile and run it to get the following performance: bash-3.2$ cc -g -O fp.c -lm bash-3.2$ timex ./a.out real 6.06 user 6.04 sys 0.01 Now most people will have heard of the optimised maths library which is added by the flag -xlibmopt. This contains optimised versions of key mathematical functions, in this instance, using the library doubles performance: bash-3.2$ cc -g -O -xlibmopt fp.c -lm bash-3.2$ timex ./a.out real 2.70 user 2.69 sys 0.00 The optimised maths library is provided as an archive library (libmopt.a), and the driver adds it to the link line just before the maths library - this causes the linker to pick the definitions provided by the static library in preference to those provided by libm. We can see the processing by asking the compiler to print out the link line: bash-3.2$ cc -### -g -O -xlibmopt fp.c -lm /usr/ccs/bin/ld ... fp.o -lmopt -lm -o a.out... The flag to the linker is -lmopt, and this is placed before the -lm flag. So what happens when the -lm flag is in the wrong place on the command line: bash-3.2$ cc -g -O -xlibmopt -lm fp.c bash-3.2$ timex ./a.out real 6.02 user 6.01 sys 0.01 If the -lm flag is before the source file (or object file for that matter), we get the slower performance from the system maths library. Why's that? If we look at the link line we can see the following ordering: /usr/ccs/bin/ld ... -lmopt -lm fp.o -o a.out So the optimised maths library is still placed before the system maths library, but the object file is placed afterwards. This would be ok if the optimised maths library were a shared library, but it is not - instead it's an archive library, and archive library processing is different - as described in the linker and library guide: "The link-editor searches an archive only to resolve undefined or tentative external references that have previously been encountered." An archive library can only be used resolve symbols that are outstanding at that point in the link processing. When fp.o is placed before the libmopt.a archive library, then the linker has an unresolved symbol defined in fp.o, and it will search the archive library to resolve that symbol. If the archive library is placed before fp.o then there are no unresolved symbols at that point, and so the linker doesn't need to use the archive library. This is why libmopt needs to be placed after the object files on the link line. On the other hand if the linker has observed any shared libraries, then at any point these are checked for any unresolved symbols. The consequence of this is that once the linker "sees" libm it will resolve any symbols it can to that library, and it will not check the archive library to resolve them. This is why libmopt needs to be placed before libm on the link line. This leads to the following order for placing files on the link line: Object files Archive libraries Shared libraries If you use this order, then things will consistently get resolved to the archive libraries rather than to the shared libaries.

    Read the article

  • Compiling for T4

    - by Darryl Gove
    I've recently had quite a few queries about compiling for T4 based systems. So it's probably a good time to review what I consider to be the best practices. Always use the latest compiler. Being in the compiler team, this is bound to be something I'd recommend But the serious points are that (a) Every release the tools get better and better, so you are going to be much more effective using the latest release (b) Every release we improve the generated code, so you will see things get better (c) Old releases cannot know about new hardware. Always use optimisation. You should use at least -O to get some amount of optimisation. -xO4 is typically even better as this will add within-file inlining. Always generate debug information, using -g. This allows the tools to attribute information to lines of source. This is particularly important when profiling an application. The default target of -xtarget=generic is often sufficient. This setting is designed to produce a binary that runs well across all supported platforms. If the binary is going to be deployed on only a subset of architectures, then it is possible to produce a binary that only uses the instructions supported on these architectures, which may lead to some performance gains. I've previously discussed which chips support which architectures, and I'd recommend that you take a look at the chart that goes with the discussion. Crossfile optimisation (-xipo) can be very useful - particularly when the hot source code is distributed across multiple source files. If you're allowed to have something as geeky as favourite compiler optimisations, then this is mine! Profile feedback (-xprofile=[collect: | use:]) will help the compiler make the best code layout decisions, and is particularly effective with crossfile optimisations. But what makes this optimisation really useful is that codes that are dominated by branch instructions don't typically improve much with "traditional" compiler optimisation, but often do respond well to being built with profile feedback. The macro flag -fast aims to provide a one-stop "give me a fast application" flag. This usually gives a best performing binary, but with a few caveats. It assumes the build platform is also the deployment platform, it enables floating point optimisations, and it makes some relatively weak assumptions about pointer aliasing. It's worth investigating. SPARC64 processor, T3, and T4 implement floating point multiply accumulate instructions. These can substantially improve floating point performance. To generate them the compiler needs the flag -fma=fused and also needs an architecture that supports the instruction (at least -xarch=sparcfmaf). The most critical advise is that anyone doing performance work should profile their application. I cannot overstate how important it is to look at where the time is going in order to determine what can be done to improve it. I also presented at Oracle OpenWorld on this topic, so it might be helpful to review those slides.

    Read the article

  • Inline template efficiency

    - by Darryl Gove
    I like inline templates, and use them quite extensively. Whenever I write code with them I'm always careful to check the disassembly to see that the resulting output is efficient. Here's a potential cause of inefficiency. Suppose we want to use the mis-named Leading Zero Detect (LZD) instruction on T4 (this instruction does a count of the number of leading zero bits in an integer register - so it should really be called leading zero count). So we put together an inline template called lzd.il looking like: .inline lzd lzd %o0,%o0 .end And we throw together some code that uses it: int lzd(int); int a; int c=0; int main() { for(a=0; a<1000; a++) { c=lzd(c); } return 0; } We compile the code with some amount of optimisation, and look at the resulting code: $ cc -O -xtarget=T4 -S lzd.c lzd.il $ more lzd.s .L77000018: /* 0x001c 11 */ lzd %o0,%o0 /* 0x0020 9 */ ld [%i1],%i3 /* 0x0024 11 */ st %o0,[%i2] /* 0x0028 9 */ add %i3,1,%i0 /* 0x002c */ cmp %i0,999 /* 0x0030 */ ble,pt %icc,.L77000018 /* 0x0034 */ st %i0,[%i1] What is surprising is that we're seeing a number of loads and stores in the code. Everything could be held in registers, so why is this happening? The problem is that the code is only inlined at the code generation stage - when the actual instructions are generated. Earlier compiler phases see a function call. The called functions can do all kinds of nastiness to global variables (like 'a' in this code) so we need to load them from memory after the function call, and store them to memory before the function call. Fortunately we can use a #pragma directive to tell the compiler that the routine lzd() has no side effects - meaning that it does not read or write to memory. The directive to do that is #pragma no_side_effect(<routine name), and it needs to be placed after the declaration of the function. The new code looks like: int lzd(int); #pragma no_side_effect(lzd) int a; int c=0; int main() { for(a=0; a<1000; a++) { c=lzd(c); } return 0; } Now the loop looks much neater: /* 0x0014 10 */ add %i1,1,%i1 ! 11 ! { ! 12 ! c=lzd(c); /* 0x0018 12 */ lzd %o0,%o0 /* 0x001c 10 */ cmp %i1,999 /* 0x0020 */ ble,pt %icc,.L77000018 /* 0x0024 */ nop

    Read the article

  • It could be worse....

    - by Darryl Gove
    As "guest" pointed out, in my file I/O test I didn't open the file with O_SYNC, so in fact the time was spent in OS code rather than in disk I/O. It's a straightforward change to add O_SYNC to the open() call, but it's also useful to reduce the iteration count - since the cost per write is much higher: ... #define SIZE 1024 void test_write() { starttime(); int file = open("./test.dat",O_WRONLY|O_CREAT|O_SYNC,S_IWGRP|S_IWOTH|S_IWUSR); ... Running this gave the following results: Time per iteration 0.000065606310 MB/s Time per iteration 2.709711563906 MB/s Time per iteration 0.178590114758 MB/s Yup, disk I/O is way slower than the original I/O calls. However, it's not a very fair comparison since disks get written in large blocks of data and we're deliberately sending a single byte. A fairer result would be to look at the I/O operations per second; which is about 65 - pretty much what I'd expect for this system. It's also interesting to examine at the profiles for the two cases. When the write() was trapping into the OS the profile indicated that all the time was being spent in system. When the data was being written to disk, the time got attributed to sleep. This gives us an indication how to interpret profiles from apps doing I/O. It's the sleep time that indicates disk activity.

    Read the article

  • Monday, 1st October: Presenting at JavaOne and Oracle Open World

    - by Darryl Gove
    On Monday 1 October I will be presenting at both JavaOne and Oracle Open World. The full conference schedule is available from here. The logistics for my sessions are as follows: JavaOne: 8:30am Monday 1 October. CON6714: "Mixed-Language Development: Leveraging Native Code from Java". San Francisco Hilton - Continental Ballroom 6 Oracle OpenWorld: 10:45am Monday 1 October. CON6382: "Maximizing Your SPARC T4 Oracle Solaris Application Performance". Marriott Marquis - Golden Gate C3 Hope to see you there!

    Read the article

  • SPARC Architecture 2011

    - by Darryl Gove
    With what appears to be minimal fanfare, an update of the SPARC Architecture has been released. If you ever look at SPARC disassembly code, then this is the document that you need to bookmark. If you are not familiar with it, then it basically describes how a SPARC processor should behave - it doesn't describe a particular implementation, just the "generic" processor. As with all revisions, it supercedes the SPARC v9 book published back in the 90s, having both corrections, and definitions of new instructions. Anyway, should be an interesting read

    Read the article

  • Write and fprintf for file I/O

    - by Darryl Gove
    fprintf() does buffered I/O, where as write() does unbuffered I/O. So once the write() completes, the data is in the file, whereas, for fprintf() it may take a while for the file to get updated to reflect the output. This results in a significant performance difference - the write works at disk speed. The following is a program to test this: #include <fcntl.h #include <unistd.h #include <stdio.h #include <stdlib.h #include <errno.h #include <stdio.h #include <sys/time.h #include <sys/types.h #include <sys/stat.h static double s_time; void starttime() { s_time=1.0*gethrtime(); } void endtime(long its) { double e_time=1.0*gethrtime(); printf("Time per iteration %5.2f MB/s\n", (1.0*its)/(e_time-s_time*1.0)*1000); s_time=1.0*gethrtime(); } #define SIZE 10*1024*1024 void test_write() { starttime(); int file = open("./test.dat",O_WRONLY|O_CREAT,S_IWGRP|S_IWOTH|S_IWUSR); for (int i=0; i<SIZE; i++) { write(file,"a",1); } close(file); endtime(SIZE); } void test_fprintf() { starttime(); FILE* file = fopen("./test.dat","w"); for (int i=0; i<SIZE; i++) { fprintf(file,"a"); } fclose(file); endtime(SIZE); } void test_flush() { starttime(); FILE* file = fopen("./test.dat","w"); for (int i=0; i<SIZE; i++) { fprintf(file,"a"); fflush(file); } fclose(file); endtime(SIZE); } int main() { test_write(); test_fprintf(); test_flush(); } Compiling and running I get 0.2MB/s for write() and 6MB/s for fprintf(). A large difference. There's three tests in this example, the third test uses fprintf() and fflush(). This is equivalent to write() both in performance and in functionality. Which leads to the suggestion that fprintf() (and other buffering I/O functions) are the fastest way of writing to files, and that fflush() should be used to enforce synchronisation of the file contents.

    Read the article

  • Series On Embedded Development (Part 3) - Runtime Optionality

    - by Darryl Mocek
    What is runtime optionality? Runtime optionality means writing and packaging your code in such a way that all of the features are available at runtime, but aren't loaded and used if the feature isn't used. The code is separate, and you can even remove the code to save persistent storage if you know the feature will not be used. In native programming terms, it's splitting your application into separate shared libraries so you only have to load what you're using, which means it only impacts volatile memory when enabled at runtime. All the functionality is there, but if it's not used at runtime, it's not loaded. A good example of this in Java is JVMTI, Java's Virtual Machine Tool Interface. On smaller, embedded platforms, these libraries may not be there. If the libraries are not there, there's no effect on the runtime as long as you don't try to use the JVMTI features. There is a trade-off between size/performance and flexibility here. Putting code in separate libraries means loading that code will take longer and it will typically take up more persistent space. However, if the code is rarely used, you can save volatile memory by including it in a separate library. You can also use this method in Java by putting rarely-used code into one or more separate JAR's. Loading a JAR and parsing it takes CPU cycles and volatile memory. Putting all of your application's code into a single JAR means more processing for that JAR. Consider putting rarely-used code in a separate library/JAR.

    Read the article

  • System.Runtime.InteropServices.COMException (0x80070008): Not enough storage is available to process

    - by Darryl Braaten
    I am trying to diagnose this exception. "System.Runtime.InteropServices.COMException (0x80070008): Not enough storage is available to process this command. (Exception from HRESULT: 0x80070008) at System.Runtime.Remoting.RemotingServices.AllocateUninitializedObject(RuntimeType objectType) at System.Runtime.Remoting.RemotingServices.AllocateUninitializedObject(Type objectType) at System.Runtime.Remoting.Activation.ActivationServices.CreateInstance(Type serverType) at System.Runtime.Remoting.Activation.ActivationServices.IsCurrentContextOK(Type serverType, Object[] props, Boolean bNewObj) at Oracle.DataAccess.Client.CThreadPool..ctor() at Oracle.DataAccess.Client.OracleCommand.set_CommandTimeout(Int32 value) ... It does not look like any of the normal types of "storage" have hit any limits. The application is using about 400MB of memory, 70 threads, 2000 handles and the hard drive has many GB free. The machine is running Windows 2003 Enterprise server with 16GB of RAM so memory shouldn't be an issue. The application is running as a windows service so there are no GDI objects being used. Running out of GDI handles is a common cause of this exception. Database connections, commands & readers are all all wrapped with using blocks so they should be getting cleaned up correctly.

    Read the article

  • Converting "is null" into a linq to sql statement

    - by Darryl Braaten
    I am having trouble replicating the following sql as a LINQ statement select TableA.* from TableA left outer join TableAinTableB on TableA.Id = TableAId where TableBId is null The following returns no lines from TableA in db.TableA join AinB in db.TableAinTableB on TableA.Id equals TableAId where AinB.TableBId == null select TableA Also tried and a few other things that didn't work. from TableA in db.TableA join AinB in db.TableAinTableB on TableA.Id equals TableAId where AinB == null select TableA TableAinTableB is a many to many table. The query I want will pull all the records from TableA that have no records in the middle table. My sql does what I want but I have no idea how to convert it to LINQ to SQL. I ended up working around it by just doing a db.ExecuteQuery("working sql"); But I would like to know if the query is possible in LINQ and how to write it, or a pointer to a document that covers this scenario. My searching did not uncover anything I found useful.

    Read the article

  • What software do you use to detect an internect connection drop?

    - by Darryl Hein
    I'm looking for a piece of software to detect drops in my internet connection and log those drops. OS doesn't really matter since I have pretty much everything running here, although something on OSX would be nice. I also don't really care how it determines that connection has been dropped, but I think that there must be something better than a ping or at least a combination of a ping and something else.

    Read the article

  • Cannot open SQL 2005 database in SQL server Management Studio 2008 R2 on Windows 7

    - by Darryl Lawrence
    I have Windows 7 64bit as my OS + SQL Server 2008 R2 installed. I can connect to SQL Databases (2008), but cannot connect to a SQL 2005 database. I can, however, connect to the 2005 SQL Database on a PC that has Windows XP as the OS and also has SQL Server 2008 R2 installed. So it seems that it works fine on XP but not on Windows 7 (32 or 64bit). is this an Operating System issue? Error message: Cannot connect to OMRSQLV016\PRODSQL002. =================================== A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (.Net SqlClient Data Provider) For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=-1&LinkId=20476 Error Number: -1 Severity: 20 State: 0

    Read the article

  • What USB key would you recommend using for running a Windows 7 VM off of?

    - by Darryl Hein
    Because I can't find a good PHP editor for OSX, I develop in Windows with PhpEd. At the moment, my development time is split between a desktop and a laptop. To partially solve the problem of having 2 different environments, I have installed a virtual machine (through Virtual Box) and put the hard drive file on an external hard drive. At the moment, I've been connecting it through Firewire 800. I have 2 problems with this setup: (1) The hard drive is fairly large so to carry the laptop and hard drive I pretty much require a backpack. (2) The hard drive requires quite a bit of power and therefore reduces the battery life (by about 40%). My thought is to move the VM hard drive onto a USB key. I realize it will be slower, but as I'm just using it for PHP development, there isn't a lot of disk activity in the VM. The only really intense time is boot up, otherwise, it just about sits idle. Do anyone have any suggestions on a USB key to use for the VM? It would need to a minimum of 32GB.

    Read the article

1 2 3  | Next Page >