Search Results

Search found 185 results on 8 pages for 'darwin esq'.

Page 1/8 | 1 2 3 4 5 6 7 8  | Next Page >

  • STLport crash (race condition, Darwin only?)

    - by Jonas Byström
    When I run STLport on Darwin I get a strange crash. (Haven't seen it anywhere else than on Mac, but exactly same thing crash on both i686 and PowerPC.) This is what it looks like in gdb: Program received signal EXC_BAD_ACCESS, Could not access memory. Reason: 13 at address: 0x0000000000000000 [Switching to process 21097] 0x000000010120f47c in stlp_std::__node_alloc_impl::_M_allocate () It may be some setting in STLport, I noticed that Mac.h and MacOSX.h seemed far behind on features. I also know that it it must be some type of race condition, since it doesn't occur just by calling this method (implicity called). The crash happens mainly when I push the system, running 10 simultaneous threads that do a lot of string handling. Other theories I come up with have to do with compiler flags (configure script) and g++ 4.2 bugs (seems like 4.4.3 isn't on Mac yet with Objective-C support, which I need to link with). HELP!!! :) Edit: I run unit tests, which do all sorts of things. This problem arise when I start 10 threads that push the system; and it always comes down to std::string::append which eventually boils down to _M_allocate. Since I can't even get a descent dump of the code that's causing the problem, I figure I'm doing something bad. Could it be so since it's trying to execute at instruction pointer 0x000...000? Are dynlibs built as DLLs in Windows with a jump table? Could it perhaps be that such a jump table has been overwritten for some reason? That would probably explain this behavior. (The code is huge, if I run out of other ideas, I'll post a minimum crashing sample here.)

    Read the article

  • OSX/Darwin unresolved symbols when linking functions from <math.h>

    - by tbone
    I'm in the process of porting a large'ish (~1M LOC) project from a Window/Visual Studio environment to other platforms, the first of which happens to be Mac OS X. Originally the project was configured as Visual Studio solutions and projects, but now I'm using (the excellent) Premake (http://industriousone.com/premake) to generate project files for multiple platforms (VS, XCode, GMake). I configured, ported and built the first few projects without any significant problems, but having ported the math lib, I ran into this weird linking error that I haven't been able to resolve: Any functions used from math.h will fail to link (causing unresolved symbols). For reference, I'm using Premake v4.2.1 to generate projects for XCode v3.2.1, which is building using gcc v4.2 for the x86_64 architecture. (All this on 64-bit Snow Leopard) I've tried to persuade gcc to link and build everything against a 'known' SDK by adding -isysroot /Developer/SDKs/MacOSX10.6.sdk -mmacosx-version-min=10.6 to the build command line. Now under normal circumstances, adding -lm should take care of this, however in Darwin, those math libs are included in libSystem, which, as far as I can tell, gets implicitly linked by gcc/ld. I've tried creating a dummy project from within XCode which just runs: float f = log2(2.0)+log2f(3.f)+log1p(1.1)+log1pf(1.2f)+sin(8.0); std::cout << f << std::endl; and as expected, this builds just fine. However, if I put the same thing in the code inside the Premake generated project, all those math functions end up unresolved. Now comparing the linking command from the 'native' XCode project with my generated XCode project, they seem pretty identical (except that my generated project links other libs as well). 'Native' project: /Developer/usr/bin/g++-4.2 -arch x86_64 -dynamiclib -isysroot /Developer/SDKs/MacOSX10.6.sdk -Lsomepath -Fsomepath -filelist somefile -install_name somename -mmacosx-version-min=10.6 -single_module -compatibility_version 1 -current_version 1 -o somename Generated project: /Developer/usr/bin/g++-4.2 -arch x86_64 -dynamiclib -Lsomepath -Fsomepath -filelist somefile -install_name somename -isysroot /Developer/SDKs/MacOSX10.6.sdk -mmacosx-version-min=10.6 somelib.a somelib2.a somelib.dylib somelib2.dylib -single_module -compatibility_version 1 -current_version 1 -o somename Any help or hints about how to proceed would be most appreciated. Are there any gcc flags or other tools that can help me resolve this?

    Read the article

  • What's up with stat on MacOSX/Darwin? Or filesystems without names...

    - by Charles Stewart
    In response to a question I asked on SO, Give the mount point of a path, one respondant suggested using stat to get the device name associated with the volume of a given path. This works nicely on Linux, but gives crazy results on MacOSX 10.4. For my system, df and mount give: cas cas$ df Filesystem 512-blocks Used Avail Capacity Mounted on /dev/disk0s3 58342896 49924456 7906440 86% / devfs 194 194 0 100% /dev fdesc 2 2 0 100% /dev <volfs> 1024 1024 0 100% /.vol automount -nsl [166] 0 0 0 100% /Network automount -fstab [170] 0 0 0 100% /automount/Servers automount -static [170] 0 0 0 100% /automount/static /dev/disk2s1 163577856 23225520 140352336 14% /Volumes/Snapshot /dev/disk2s2 409404102 5745938 383187960 1% /Volumes/Sparse cas cas$ mount /dev/disk0s3 on / (local, journaled) devfs on /dev (local) fdesc on /dev (union) <volfs> on /.vol automount -nsl [166] on /Network (automounted) automount -fstab [170] on /automount/Servers (automounted) automount -static [170] on /automount/static (automounted) /dev/disk2s1 on /Volumes/Snapshot (local, nodev, nosuid, journaled) /dev/disk2s2 on /Volumes/Sparse (asynchronous, local, nodev, nosuid) Trying to get the devices from the mount points, though: cas cas$ df | grep -e/ | awk '{print $NF}' | while read line; do echo $line $(stat -f"%Sdr" $line); done / disk0s3r /dev ???r /dev ???r /.vol ???r /Network ???r /automount/Servers ???r /automount/static ???r /Volumes/Snapshot disk2s1r /Volumes/Sparse disk2s2r Here, I'm feeding each of the mount points scraped from df to stat, outputting the results of the "%Sdr" format string, which is supposed to be the device name: Cf. stat(1) man page: The special output specifier S may be used to indicate that the output, if applicable, should be in string format. May be used in combination with: ... dr Display actual device name. What's going on? Is it a bug in stat, or some Darwin VFS weirdness? Postscript Per Andrew McGregor, try passing "%Sd" to stat for more weirdness. It lists some apparently arbitrary subset of files from CWD...

    Read the article

  • What's up with stat on Macos/Darwin? Or filesystems without names...

    - by Charles Stewart
    In response to a question I asked on SO, Give the mount point of a path, one respondant suggested using stat to get the device name associated with the volume of a given path. This works nicely on Linux, but gives crazy results on Macos 10.4. For my system, df and mount give: cas cas$ df Filesystem 512-blocks Used Avail Capacity Mounted on /dev/disk0s3 58342896 49924456 7906440 86% / devfs 194 194 0 100% /dev fdesc 2 2 0 100% /dev 1024 1024 0 100% /.vol automount -nsl [166] 0 0 0 100% /Network automount -fstab [170] 0 0 0 100% /automount/Servers automount -static [170] 0 0 0 100% /automount/static /dev/disk2s1 163577856 23225520 140352336 14% /Volumes/Snapshot /dev/disk2s2 409404102 5745938 383187960 1% /Volumes/Sparse cas cas$ mount /dev/disk0s3 on / (local, journaled) devfs on /dev (local) fdesc on /dev (union) on /.vol automount -nsl [166] on /Network (automounted) automount -fstab [170] on /automount/Servers (automounted) automount -static [170] on /automount/static (automounted) /dev/disk2s1 on /Volumes/Snapshot (local, nodev, nosuid, journaled) /dev/disk2s2 on /Volumes/Sparse (asynchronous, local, nodev, nosuid) Trying to get the devices from the mount points, though: cas cas$ df | grep -e/ | awk '{print $NF}' | while read line; do echo $line $(stat -f"%Sdr" $line); done / disk0s3r /dev ???r /dev ???r /.vol ???r /Network ???r /automount/Servers ???r /automount/static ???r /Volumes/Snapshot disk2s1r /Volumes/Sparse disk2s2r Here, I'm feeding each of the mount points scraped from df to stat, outputing the results of the "%Sdr" format string, which is supposed to be the device name: Cf. stat(1) man page: The special output specifier S may be used to indicate that the output, if applicable, should be in string format. May be used in combination with: ... dr Display actual device name. What's going on? Is it a bug in stat, or some Darwin VFS weirdness? Postscript Per Andrew McGregor, try passing "%Sd" to stat for more weirdness. It lists some apparently arbitrary subset of files from CWD...

    Read the article

  • What's up with stat on Mac OS X/Darwin? Or filesystems without names...

    - by Charles Stewart
    In response to a question I asked on SO, Give the mount point of a path, one respondant suggested using stat to get the device name associated with the volume of a given path. This works nicely on Linux, but gives crazy results on Mac OS X 10.4. For my system, df and mount give: cas cas$ df Filesystem 512-blocks Used Avail Capacity Mounted on /dev/disk0s3 58342896 49924456 7906440 86% / devfs 194 194 0 100% /dev fdesc 2 2 0 100% /dev <volfs> 1024 1024 0 100% /.vol automount -nsl [166] 0 0 0 100% /Network automount -fstab [170] 0 0 0 100% /automount/Servers automount -static [170] 0 0 0 100% /automount/static /dev/disk2s1 163577856 23225520 140352336 14% /Volumes/Snapshot /dev/disk2s2 409404102 5745938 383187960 1% /Volumes/Sparse cas cas$ mount /dev/disk0s3 on / (local, journaled) devfs on /dev (local) fdesc on /dev (union) <volfs> on /.vol automount -nsl [166] on /Network (automounted) automount -fstab [170] on /automount/Servers (automounted) automount -static [170] on /automount/static (automounted) /dev/disk2s1 on /Volumes/Snapshot (local, nodev, nosuid, journaled) /dev/disk2s2 on /Volumes/Sparse (asynchronous, local, nodev, nosuid) Trying to get the devices from the mount points, though: cas cas$ df | grep -e/ | awk '{print $NF}' | while read line; do echo $line $(stat -f"%Sdr" $line); done / disk0s3r /dev ???r /dev ???r /.vol ???r /Network ???r /automount/Servers ???r /automount/static ???r /Volumes/Snapshot disk2s1r /Volumes/Sparse disk2s2r Here, I'm feeding each of the mount points scraped from df to stat, outputting the results of the "%Sdr" format string, which is supposed to be the device name: Cf. stat(1) man page: The special output specifier S may be used to indicate that the output, if applicable, should be in string format. May be used in combination with: ... dr Display actual device name. What's going on? Is it a bug in stat, or some Darwin VFS weirdness? Postscript Per Andrew McGregor, try passing "%Sd" to stat for more weirdness. It lists some apparently arbitrary subset of files from CWD...

    Read the article

  • Installed Perl DBI Module Can't Be Found

    - by Russell C.
    I'm trying to setup a Perl development environment on my Mac laptop and have been having a really hard time getting it working. I thought I had everything configured correctly but when I try to run a sample script it is reporting errors with the DBI module and can't access the DB. Here is what is reported in the Apache error logs: [Fri Apr 30 23:11:33 2010] [error] [client 127.0.0.1] Can't locate DBI.pm in @INC (@INC contains: /Library/Perl/Updates/5.10.0/darwin-thread-multi-2level /Library/Perl/Updates/5.10.0 /System/Library/Perl/5.10.0/darwin-thread-multi-2level /System/Library/Perl/5.10.0 /Library/Perl/5.10.0/darwin-thread-multi-2level /Library/Perl/5.10.0 /Network/Library/Perl/5.10.0/darwin-thread-multi-2level /Network/Library/Perl/5.10.0 /Network/Library/Perl /System/Library/Perl/Extras/5.10.0/darwin-thread-multi-2level /System/Library/Perl/Extras/5.10.0 .) at main.pm line 5. I downloaded and installed both modules manually to work with MAMP using the following commands as specified in this forum post: For DBI 1. cd /Library/Perl/DBI-1.611 2. sudo Perl Makefile.PL 3. sudo make 4. sudo make install For DBD 1. cd /Library/Perl/DBD-mysql-4.014 2. sudo Perl Makefile.PL --mysql_config=/Applications/MAMP/Library/bin/mysql_config 3. sudo make 4. sudo make install What I noticed while running the above commands is that the files seems to be getting installed in the '/opt/local/lib/perl5/site_perl/5.8.9/darwin-2level/' directory which doesn't seem to be one of the search directories that Apache mentions in the error at the beginning of this post. Here is what I'm seeing during the install: $ sudo make install Files found in blib/arch: installing files in blib/lib into architecture dependent library tree Installing /opt/local/lib/perl5/site_perl/5.8.9/darwin-2level/auto/DBI/DBI.bundle Installing /opt/local/lib/perl5/site_perl/5.8.9/darwin-2level/auto/DBI/dbipport.h Installing /opt/local/lib/perl5/site_perl/5.8.9/darwin-2level/auto/DBI/DBIXS.h Installing /opt/local/lib/perl5/site_perl/5.8.9/darwin-2level/auto/DBI/dbixs_rev.h Installing /opt/local/lib/perl5/site_perl/5.8.9/darwin-2level/auto/DBI/Driver.xst Installing /opt/local/lib/perl5/site_perl/5.8.9/darwin-2level/auto/DBI/Driver_xst.h Installing /opt/local/lib/perl5/site_perl/5.8.9/darwin-2level/DBI.pm Installing /opt/local/lib/perl5/site_perl/5.8.9/darwin-2level/TASKS.pod Installing /opt/local/lib/perl5/site_perl/5.8.9/darwin-2level/DBD/DBM.pm Installing /opt/local/lib/perl5/site_perl/5.8.9/darwin-2level/DBD/File.pm Installing /opt/local/lib/perl5/site_perl/5.8.9/darwin-2level/DBD/Gofer.pm Installing /opt/local/lib/perl5/site_perl/5.8.9/darwin-2level/DBI/Changes.pm Installing /opt/local/lib/perl5/site_perl/5.8.9/darwin-2level/DBI/DBD.pm Installing /opt/local/lib/perl5/site_perl/5.8.9/darwin-2level/DBI/Profile.pm Installing /opt/local/lib/perl5/site_perl/5.8.9/darwin-2level/DBI/ProxyServer.pm Installing /opt/local/lib/perl5/site_perl/5.8.9/darwin-2level/DBI/PurePerl.pm Installing /opt/local/share/man/man3/DBD::DBM.3pm Installing /opt/local/share/man/man3/DBD::File.3pm Installing /opt/local/share/man/man3/DBD::Gofer.3pm Installing /opt/local/share/man/man3/DBI.3pm Installing /opt/local/share/man/man3/DBI::DBD.3pm Installing /opt/local/share/man/man3/DBI::Profile.3pm Installing /opt/local/share/man/man3/DBI::ProxyServer.3pm Installing /opt/local/share/man/man3/DBI::PurePerl.3pm Installing /opt/local/share/man/man3/TASKS.3pm Installing /opt/local/bin/dbiprof Installing /opt/local/bin/dbiproxy Writing /opt/local/lib/perl5/site_perl/5.8.9/darwin-2level/auto/DBI/.packlist Appending installation info to /opt/local/lib/perl5/5.8.9/darwin-2level/perllocal.pod My question is, what am I doing wrong and how can I either 1) Get Apache to look in the right directory where the DBD & DBI modules are installed or 2) Update the way I'm installing the module to install them into one of the search directories. I honestly don't know what option makes more sense and could use guidance on that as well. As you can probably tell I'm pretty lost at the moment. Please help!!!

    Read the article

  • How can I install Perl's DBI on Mac OS X so Apache can find it?

    - by Russell C.
    I'm trying to setup a Perl development environment on my Mac laptop and have been having a really hard time getting it working. I thought I had everything configured correctly but when I try to run a sample script it is reporting errors with the DBI module and can't access the DB. Here is what is reported in the Apache error logs: [Fri Apr 30 23:11:33 2010] [error] [client 127.0.0.1] Can't locate DBI.pm in @INC (@INC contains: /Library/Perl/Updates/5.10.0/darwin-thread-multi-2level /Library/Perl/Updates/5.10.0 /System/Library/Perl/5.10.0/darwin-thread-multi-2level /System/Library/Perl/5.10.0 /Library/Perl/5.10.0/darwin-thread-multi-2level /Library/Perl/5.10.0 /Network/Library/Perl/5.10.0/darwin-thread-multi-2level /Network/Library/Perl/5.10.0 /Network/Library/Perl /System/Library/Perl/Extras/5.10.0/darwin-thread-multi-2level /System/Library/Perl/Extras/5.10.0 .) at main.pm line 5. I downloaded and installed both modules manually to work with MAMP using the following commands as specified in this forum post: For DBI 1. cd /Library/Perl/DBI-1.611 2. sudo Perl Makefile.PL 3. sudo make 4. sudo make install For DBD 1. cd /Library/Perl/DBD-mysql-4.014 2. sudo Perl Makefile.PL --mysql_config=/Applications/MAMP/Library/bin/mysql_config 3. sudo make 4. sudo make install What I noticed while running the above commands is that the files seems to be getting installed in the '/opt/local/lib/perl5/site_perl/5.8.9/darwin-2level/' directory which doesn't seem to be one of the search directories that Apache mentions in the error at the beginning of this post. Here is what I'm seeing during the install: $ sudo make install Files found in blib/arch: installing files in blib/lib into architecture dependent library tree Installing /opt/local/lib/perl5/site_perl/5.8.9/darwin-2level/auto/DBI/DBI.bundle Installing /opt/local/lib/perl5/site_perl/5.8.9/darwin-2level/auto/DBI/dbipport.h Installing /opt/local/lib/perl5/site_perl/5.8.9/darwin-2level/auto/DBI/DBIXS.h Installing /opt/local/lib/perl5/site_perl/5.8.9/darwin-2level/auto/DBI/dbixs_rev.h Installing /opt/local/lib/perl5/site_perl/5.8.9/darwin-2level/auto/DBI/Driver.xst Installing /opt/local/lib/perl5/site_perl/5.8.9/darwin-2level/auto/DBI/Driver_xst.h Installing /opt/local/lib/perl5/site_perl/5.8.9/darwin-2level/DBI.pm Installing /opt/local/lib/perl5/site_perl/5.8.9/darwin-2level/TASKS.pod Installing /opt/local/lib/perl5/site_perl/5.8.9/darwin-2level/DBD/DBM.pm Installing /opt/local/lib/perl5/site_perl/5.8.9/darwin-2level/DBD/File.pm Installing /opt/local/lib/perl5/site_perl/5.8.9/darwin-2level/DBD/Gofer.pm Installing /opt/local/lib/perl5/site_perl/5.8.9/darwin-2level/DBI/Changes.pm Installing /opt/local/lib/perl5/site_perl/5.8.9/darwin-2level/DBI/DBD.pm Installing /opt/local/lib/perl5/site_perl/5.8.9/darwin-2level/DBI/Profile.pm Installing /opt/local/lib/perl5/site_perl/5.8.9/darwin-2level/DBI/ProxyServer.pm Installing /opt/local/lib/perl5/site_perl/5.8.9/darwin-2level/DBI/PurePerl.pm Installing /opt/local/share/man/man3/DBD::DBM.3pm Installing /opt/local/share/man/man3/DBD::File.3pm Installing /opt/local/share/man/man3/DBD::Gofer.3pm Installing /opt/local/share/man/man3/DBI.3pm Installing /opt/local/share/man/man3/DBI::DBD.3pm Installing /opt/local/share/man/man3/DBI::Profile.3pm Installing /opt/local/share/man/man3/DBI::ProxyServer.3pm Installing /opt/local/share/man/man3/DBI::PurePerl.3pm Installing /opt/local/share/man/man3/TASKS.3pm Installing /opt/local/bin/dbiprof Installing /opt/local/bin/dbiproxy Writing /opt/local/lib/perl5/site_perl/5.8.9/darwin-2level/auto/DBI/.packlist Appending installation info to /opt/local/lib/perl5/5.8.9/darwin-2level/perllocal.pod My question is, what am I doing wrong and how can I either 1) Get Apache to look in the right directory where the DBD & DBI modules are installed or 2) Update the way I'm installing the module to install them into one of the search directories. I honestly don't know what option makes more sense and could use guidance on that as well. As you can probably tell I'm pretty lost at the moment. Please help!!! Thanks in advance.

    Read the article

  • Compilation error while compiling an existing code base

    - by brijesh
    Hi, While building an existing code base on Mac OS using its native build setup I am getting some basic strange error while compilation phase. /Developer/SDKs/MacOSX10.3.9.sdk/usr/include/gcc/darwin/3.3/c++/bits/locale_facets.h: In constructor 'std::collate_byname<_CharT::collate_byname(const char*, size_t)': /Developer/SDKs/MacOSX10.3.9.sdk/usr/include/gcc/darwin/3.3/c++/bits/locale_facets.h:1072: error: '_M_c_locale_collate' was not declared in this scope /Developer/SDKs/MacOSX10.3.9.sdk/usr/include/gcc/darwin/3.3/c++/ppc-darwin/bits/messages_members.h: In constructor 'std::messages_byname<_CharT::messages_byname(const char*, size_t)': /Developer/SDKs/MacOSX10.3.9.sdk/usr/include/gcc/darwin/3.3/c++/ppc-darwin/bits/messages_members.h:79: error: '_M_c_locale_messages' was not declared in this scope /Developer/SDKs/MacOSX10.3.9.sdk/usr/include/gcc/darwin/3.3/c++/limits: At global scope: /Developer/SDKs/MacOSX10.3.9.sdk/usr/include/gcc/darwin/3.3/c++/limits:897: error: 'float __builtin_huge_valf()' cannot appear in a constant-expression /Developer/SDKs/MacOSX10.3.9.sdk/usr/include/gcc/darwin/3.3/c++/limits:897: error: a function call cannot appear in a constant-expression /Developer/SDKs/MacOSX10.3.9.sdk/usr/include/gcc/darwin/3.3/c++/limits:897: error: 'float __builtin_huge_valf()' cannot appear in a constant-expression /Developer/SDKs/MacOSX10.3.9.sdk/usr/include/gcc/darwin/3.3/c++/limits:897: error: a function call cannot appear in a constant-expression /Developer/SDKs/MacOSX10.3.9.sdk/usr/include/gcc/darwin/3.3/c++/limits:899: error: 'float __builtin_nanf(const char*)' cannot appear in a constant-expression /Developer/SDKs/MacOSX10.3.9.sdk/usr/include/gcc/darwin/3.3/c++/limits:899: error: a function call cannot appear in a constant-expression /Developer/SDKs/MacOSX10.3.9.sdk/usr/include/gcc/darwin/3.3/c++/limits:899: error: 'float __builtin_nanf(const char*)' cannot appear in a constant-expression /Developer/SDKs/MacOSX10.3.9.sdk/usr/include/gcc/darwin/3.3/c++/limits:899: error: a function call cannot appear in a constant-expression /Developer/SDKs/MacOSX10.3.9.sdk/usr/include/gcc/darwin/3.3/c++/limits:900: error: field initializer is not constant /Developer/SDKs/MacOSX10.3.9.sdk/usr/include/gcc/darwin/3.3/c++/limits:915: error: field initializer is not constant

    Read the article

  • Darwin Streaming Server

    - by Asmv9
    Hello, I am using Darwin Streaming server and i would like to know if i can do this: While the server is streaming one video file,at some point switch to another video file and start the streaming of this new file from the point the first file has stopped?and can i do this in one rtsp request? Thank u in advance, Any suggestions will be helpful.

    Read the article

  • Darwin Streaming Server Interval Role

    - by Asmv9
    I want to use the Interval Role in Darwin streaming server,more specifically i want to call the QTSS_SetIntervalRoleTimer() when the server starts streaming a video file.But i have problem in doing this as from what it seems,the method returns QTSS_Err when i do that. I believe that the problem is due to the fact that the callback is made in a a module-created thread. Is there a specific place where this callback must be done?(if i put the callback in the register role of my module it works,but i dont want this,because i dont want the timer starting when the server starts).Any help will be useful,thank u in advance.

    Read the article

  • Darwin Streaming Server VOD playlist?

    - by StackedCrooked
    I have a large MPEG4 file split up into a number of smaller files. I would like to make these files available as one movie. So I need something like a playlist. It seems the playlist option for live streaming is not available for VOD. Is there a way to get this functionality somehow?

    Read the article

  • Determine which version of linux/unix/darwin I have

    - by John
    I have root ssh/terminal access to a linux server. How do I determine which version of centos I have? Some people suggested I run the command cat /etc/redhat-release but I got an error saying file not found. In fact, i'm not entirely sure i'm even using CentOS. That's what some suggested it might be. Here's a list of commands I tried that gave me no file or directory error: cat /etc/*release* cat /etc/*version* cat /proc/*version* cat /proc/*release* Here's a list of linux commands that do not exist: lsb_release: command not found wget: command not found yum: command not found

    Read the article

  • Darwin Streaming Server doesn't gives content

    - by cajax.mp
    Hello! I have problems with Darwin Streaming server 5.5.5 on Debian. When i'm trying to open some stream, for ex. rtsp://sample.com/sample_100kbit.mp4 player reports it can't load stream and breaks connection. "Access History" section reports file was requested, so, at least initial connection is working, but nothing more. What can be wrong and what to check?

    Read the article

  • How do I create a "here document" within a shell function?

    - by BenU
    I'm working my way through William Shotts Jr.'s great The Linux Command Line on my Mac OSX 10.7.5 system. 90% of the linux that Shotts covers is close enough to Darwin that I can figure out or GTEM to figure out what's going on. I've made it to chapter 27 on "Writing Shell Scripts" and am getting hung up creating "here files" within a function. I get an syntax error: unexpected end of file error when I include the following function: report_uptime () { cat <<- _EOF_ <H2>System Uptime</H2> <PRE>$(uptime)</PRE> _EOF_ return } The error goes away if I use the following function placeholder: report_uptime () { return } Also, elsewhere in the script, outside of a function I use the cat << _EOF_ format to create a "here file" with no trouble: cat << _EOF_ <HTML> <HEAD> <TITLE>$TITLE</TITLE> </HEAD> <BODY> <H1>$TITLE</H1> <P>$TIME_STAMP</P> $(report_uptime) $(report_disk_space) $(report_home_space) </BODY> </HTML> _EOF_ If anyone has any idea what I'm doing wrong I would be grateful!

    Read the article

  • va_list crash bug from hell

    - by Jonas Byström
    I'm getting crashes due to memory overwrites (possibly within STLport) running on Darwin. Totally out of ideas, what to do? (Added this question so no-one else would run into the same trap without finding a viable answer.)

    Read the article

  • Does operator new allocate on THREAD heap?

    - by Jonas Byström
    My problem seems to be this: heap data allocated by one thread (that later dies) seems to die as well. As so: Thread X: starts Thread Y: starts Thread X: ptr = new some bytes Thread X: dies Thread Y: tries to use ptr - and crashes! So far, I've only seen this problem on Darwin (Mac OS 10.5 and 10.6), but haven't tried more other platforms than Windows and Linux (Ubuntu) where it works as expected. I've had this problem for some time, so any know-how or more information about this is highly appreciated!

    Read the article

  • Ballooning Mac OS X kernel_task and Wired memory usage. How to diagnose / fix?

    - by user28930
    I have a very strange issue, which I'm having a hard time diagnosing as to the root cause. I have a Mac Pro (2008, 8-core 2.8 GHz, 8800GT) with 14 GB of RAM (recently upgraded because of this issue!). When I boot my system and log in, vm_stat / top / Activity Monitor will show that kernel_task has about 150 MB allocated, and the machine has about 800 MB of Wired memory being allocated. Even initially, 800 MB seems an awful lot of wired memory to be allocated with no applications running - but, it gets worse. (NB: Wired is locked, unswappable memory) After a very short time, sometimes triggered by something as simple as launching a terminal, kernel_task will balloon to 8-900 MB of Real Mem (RSIZE), and Wired Memory will accelerate to 1.6 GB (implying that all the extra memory requests are for wired RAM in the kernel). If I quit everything (I.E: no running applications, bar an activity monitor or terminal to view top), there is no appreciable reduction in either kernel_task RSIZE, or Wired Memory usage. Going the opposite way, and loading the system with tasks also shows that wired memory does not get reduced - and that importantly it is not reduced in preference to heavy swapping. If I log out and log back in again, it reduces a bit (450 MB kernel_task, 1.28 GB Wired), but not back to the start. I'm not running any wacky kexts - and futhermore, kextstat shows no huge memory allocations there; the largest being com.apple.nvidia.nv50hal at about 4 MB of Memory. The machine feels overall more sluggish when this has happened - unsurprisingly because such a huge amount of RAM has been marked as non-pageable. So I have a few questions: 1) Is there a good way to diagnose what has allocated all of this wired memory? It's often over 2 times the kernel_task size, running no applications. The real memory total doesn't seem to add up - it seems that there is a bunch of RAM that isn't being accounted for anywhere. 2) What is happening to cause the kernel to suddenly require 6 times as much memory?

    Read the article

  • Handling mach exceptions in 64bit OS X application

    - by Brad S
    I have been able to register my own mach port to capture mach exceptions in my applications and it works beautifully when I target 32 bit. However when I target 64 bit, my exception handler catch_exception_raise() gets called but the array of exception codes that is passed to the handler are 32 bits wide. This is expected in a 32 bit build but not in 64 bit. In the case where I catch EXC_BAD_ACCESS the first code is the error number and the second code should be the address of the fault. Since the second code is 32 bits wide the high 32 bits of the 64 bit fault address is truncated. I found a flag in <mach/exception_types.h> I can pass in task_set_exception_ports() called MACH_EXCEPTION_CODES which from looking at the Darwin sources appears to control the size of the codes passed to the handler. It looks like it is meant to be ored with the behavior passed in to task_set_exception_ports(). However when I do this and trigger an exception, my mach port gets notified, I call exc_server() but my handler never gets called, and when the reply message is sent back to the kernel I get the default exception behavior. I am targeting the 10.6 SDK. I really wish apple would document this stuff better. Any one have any ideas?

    Read the article

  • How can I pre-authorize authopen?

    - by Georg
    I'm using authopen inside one of my programs to modify files owned by root. As can be seen in the screenshot below authopen asks for a admin password. What I'd like to achieve is that the dialog shows my app's name and then passes the authorization to authopen. Code Launching authopen which returns an authorized file descriptor. int pipe[2]; socketpair(AF_UNIX, SOCK_STREAM, 0, pipe); if (fork() == 0) { // child // close parent's pipe close(pipe[0]); dup2(pipe[1], STDOUT_FILENO); const char *authopenPath = "/usr/libexec/authopen"; execl(authopenPath, authopenPath, "-stdoutpipe", [self.device.devicePath fileSystemRepresentation], NULL); NSLog(@"Fatal error, quitting."); exit(-1); } // parent // close childs's pipe close(pipe[1]); // get file descriptor through sockets I'd really like not to use AuthorizationExecuteWithPrivileges because then I'd have to get more rights than I want to.

    Read the article

  • EADDRNOTAVAIL when binding 127.0.0.1 on localhost?

    - by Jonas Byström
    I'm getting errno==49 (EADDRNOTAVAIL) when trying to UDP-bind() to 127.0.0.1:47346 running Mac OS X on a G5 (big endian PowerPC). Is there something preventing me from doing so? I've tried other addresses and ports (192.168.1.2 and port 47346) but with no success. Here's a gdb printout of my sockaddr_in: $1 = { sin_len = 0 '\0', sin_family = 2 '\002', sin_port = 47346, sin_addr = { s_addr = 3232235778 }, sin_zero = "???\000\000??" }

    Read the article

1 2 3 4 5 6 7 8  | Next Page >