Search Results

Search found 57907 results on 2317 pages for 'database access'.

Page 1/2317 | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

• SQL SERVER – Retrieve and Explore Database Backup without Restoring Database – Idera virtual databas

  - by pinaldave

  I recently downloaded Idera’s SQL virtual database, and tested it. There are a few things about this tool which caught my attention. My Scenario It is quite common in real life that sometimes observing or retrieving older data is necessary; however, it had changed as time passed by. The full database backup was 40 GB in size, and, to restore it on our production server, it usually takes around 16 to 22 minutes, depending on the load server that is usually present. This range in time varies from one server to another as per the configuration of the computer. Some other issues we used to have are the following: When we try to restore a large 40-GB database, we needed at least that much space on our production server. Once in a while, we even had to make changes in the restored database, and use the said changed and restored database for our purpose, making it more time-consuming. My Solution I have heard a lot about the Idera’s SQL virtual database tool.. Well, right after we started to test this tool, we found out that it really delivers what it promises. Using this software was very easy and we were able to restore our database from backup in less than 2 minutes, sparing us from the usual longer time of 16–22 minutes. The needful was finished in a total of 10 minutes. Another interesting observation is that there is no need to have an additional space for restoring the database. For complete database restoration, the single additional MB on the drive is not required anymore. We can use the database in the same way as our regular database, and there is no need for any additional configuration and setup. Let us look at the most relevant points of this product based on my initial experience: Quick restoration of the database backup No additional space required for database restoration virtual database has no physical .MDF or .LDF The database which is restored is, in fact, the backup file converted in the virtual database. DDL and DML queries can be executed against this virtually restored database. Regular backup operation can be implemented against virtual database, creating a physical .bak file that can be used for future use. There was no observed degradation in performance on the original database as well the restored virtual database. Additional T-SQL queries can be let off on the virtual database. Well, this summarizes my quick review. And, as I was saying, I am very impressed with the product and I plan to explore it more. There are many features that I have noticed in this tool, which I think can be very useful if properly understood. I had taken a few screenshots using my demo database afterwards. Let us see what other things this tool can do besides the mentioned activities. I am surprised with its performance so I want to know how exactly this feature works, specifically in the matter of why it does not create any additional files and yet, it still allows update on the virtually restored database. I guess I will have to send an e-mail to the developers of Idera and try to figure this out from them. I think this tool is very useful, and it delivers a high level of performance way more than what I expected. Soon, I will write a review for additional uses of SQL virtual database.. If you are using SQL virtual database in your production environment, I am eager to learn more about it and your experience while using it. The ‘Virtual’ Part of virtual database When I set out to test this software, I thought virtual database had something to do with Hyper-V or visualization. In fact, the virtual database is a kind of database which shows up in your SQL Server Management Studio without actually restoring or even creating it. This tool creates a database in SSMS from the backup of the same database. The backup, however, works virtually the same way as original database. Potential Usage of virtual database: As soon as I described this tool to my teammate, I think his very first reaction was, “hey, if we have this then there is no need for log shipping.” I find his comment very interesting as log shipping is something where logs are moved to another server. In fact, there are no updates on the database from log; I would rather compare it with Snapshot Replication. In fact, whatever we use, snapshot replicated database can be similarly used and configured with virtual database. I totally believe that we can use it for reporting purpose. In fact, after this database was configured, I think the uses of this tool are unlimited. I will have to spend some more time studying it and will get back to you. Click on images to see larger images. virtual database Console Harddrive Space before virtual database Setup Attach Full Backup Screen Backup on Harddrive Attach Full Backup Screen with Settings virtual database Setup – less than 60 sec virtual database Setup – Online Harddrive Space after virtual database Setup Point in Time Recovery Option – Timeline View virtual database Summary No Performance Difference between Regular DB vs Virtual DB Please note that all SQL Server MVP gets free license of this software. Reference: Pinal Dave (http://blog.SQLAuthority.com), Idera (virtual database) Filed under: Database, Pinal Dave, SQL, SQL Add-On, SQL Authority, SQL Backup and Restore, SQL Data Storage, SQL Query, SQL Server, SQL Tips and Tricks, SQL Utility, SQLAuthority News, T SQL, Technology Tagged: Idera

  Read the article

• Postgres user drop

  - by Grasper

  I am trying to drop a user: drop user testUser; I want to force this to work in a simple manner (Not a million calls)... How can I do this easily? I get this output: ERROR: role "testUser" cannot be dropped because some objects depend on it DETAIL: access to table main.tap_db_version access to table main.user_instance access to table main.target_type access to table main.status_code access to table main.state_space_profile access to table main.service_subscription access to table main.service_instance access to table main.sa_ordnance_weapon_type access to table main.operation access to table main.mission_class access to table main.map_symbol access to table main.ada_weapon_type access to table main.active_process access to table main.acft_type_00_only access to table main.abp_create_params access to table main.exercise access to table main.decl access to table main.data_set access to table main.cancellation_notice access to table main.ato_family_tree access to table main.apportionment_cat_cd access to table main.abp access to table main.alert_settings access to table main.alert_log access to table main.airspace_usage_category access to schema main access to view testUser.top_priority access to view testUser.target_ssm_msn_count access to view testUser.target_air_msn_count access to view testUser.sortie_sum access to view testUser.ref_info access to view testUser.preview_rmk_count access to view testUser.preview_pgm_las_count access to view testUser.preview_pgm_desi_count access to view testUser.preview_objective_count access to view testUser.preview_gfriend_count access to view testUser.preview_escort_msn_req access to view testUser.preview_chaff_data access to view testUser.preview_airmove_seg access to view testUser.preview_aircraft_total access to view testUser.offload_total access to view testUser.objective_count access to view testUser.fuel_planned access to view testUser.ew_data access to view testUser.dual access to view testUser.current_base_inventory access to view testUser.cell_total access to view testUser.asgn_sortie_sum access to view testUser.appor_sorties_planned access to view testUser.airmove_seg access to view testUser.aircraft_total access to view testUser.abp access to table testUser.req_msn_task access to table testUser.req_task_source_req access to table testUser.req_ssm_msn access to table testUser.req_ssm_source access to table testUser.req_msn access to table testUser.req_msn_warnings access to table testUser.req_air_msn access to table testUser.req_src_header access to table testUser.req_msn_ids access to table testUser.req_msn_comment access to table testUser.req_c2_msn access to table testUser.req_c2_source access to table testUser.req_ada_msn access to table testUser.req_ada_vertex access to table testUser.weather_forecast access to table testUser.weather_coords access to table testUser.weather_area access to table testUser.weapon_option access to table testUser.wag_activity access to table testUser.unit_remark access to table testUser.unit_location_turn access to table testUser.unit_iff access to table testUser.unit_coordination access to table testUser.unit_code access to table testUser.trace_point access to table testUser.tasking_agency access to table testUser.task_unit access to table testUser.target_type access to table testUser.tap_db_version access to table testUser.status_code access to table testUser.state_space_threat access to table testUser.state_space_profile access to table testUser.state_space access to table testUser.ssm_mission access to table testUser.spins_section_id access to table testUser.spins_codes access to table testUser.spins access to table testUser.unit_location access to table testUser.ship_target_request access to table testUser.service_subscription access to table testUser.service_instance access to table testUser.sa_ordnance_weapon_type access to table testUser.runway access to table testUser.restricted_codes access to table testUser.response_entity access to table testUser.residual_mission access to table testUser.request_objective access to table testUser.request and 194 other objects (see server log for list)

  Read the article

• Postgres user/role drop

  - by Grasper

  I am trying to drop a user: drop user testUser; I want to force this to work in a simple manner (Not a million calls)... How can I do this easily? I get this output: ERROR: role "testUser" cannot be dropped because some objects depend on it DETAIL: access to table main.tap_db_version access to table main.user_instance access to table main.target_type access to table main.status_code access to table main.state_space_profile access to table main.service_subscription access to table main.service_instance access to table main.sa_ordnance_weapon_type access to table main.operation access to table main.mission_class access to table main.map_symbol access to table main.ada_weapon_type access to table main.active_process access to table main.acft_type_00_only access to table main.abp_create_params access to table main.exercise access to table main.decl access to table main.data_set access to table main.cancellation_notice access to table main.ato_family_tree access to table main.apportionment_cat_cd access to table main.abp access to table main.alert_settings access to table main.alert_log access to table main.airspace_usage_category access to schema main access to view testUser.top_priority access to view testUser.target_ssm_msn_count access to view testUser.target_air_msn_count access to view testUser.sortie_sum access to view testUser.ref_info access to view testUser.preview_rmk_count access to view testUser.preview_pgm_las_count access to view testUser.preview_pgm_desi_count access to view testUser.preview_objective_count access to view testUser.preview_gfriend_count access to view testUser.preview_escort_msn_req access to view testUser.preview_chaff_data access to view testUser.preview_airmove_seg access to view testUser.preview_aircraft_total access to view testUser.offload_total access to view testUser.objective_count access to view testUser.fuel_planned access to view testUser.ew_data access to view testUser.dual access to view testUser.current_base_inventory access to view testUser.cell_total access to view testUser.asgn_sortie_sum access to view testUser.appor_sorties_planned access to view testUser.airmove_seg access to view testUser.aircraft_total access to view testUser.abp access to table testUser.req_msn_task access to table testUser.req_task_source_req access to table testUser.req_ssm_msn access to table testUser.req_ssm_source access to table testUser.req_msn access to table testUser.req_msn_warnings access to table testUser.req_air_msn access to table testUser.req_src_header access to table testUser.req_msn_ids access to table testUser.req_msn_comment access to table testUser.req_c2_msn access to table testUser.req_c2_source access to table testUser.req_ada_msn access to table testUser.req_ada_vertex access to table testUser.weather_forecast access to table testUser.weather_coords access to table testUser.weather_area access to table testUser.weapon_option access to table testUser.wag_activity access to table testUser.unit_remark access to table testUser.unit_location_turn access to table testUser.unit_iff access to table testUser.unit_coordination access to table testUser.unit_code access to table testUser.trace_point access to table testUser.tasking_agency access to table testUser.task_unit access to table testUser.target_type access to table testUser.tap_db_version access to table testUser.status_code access to table testUser.state_space_threat access to table testUser.state_space_profile access to table testUser.state_space access to table testUser.ssm_mission access to table testUser.spins_section_id access to table testUser.spins_codes access to table testUser.spins access to table testUser.unit_location access to table testUser.ship_target_request access to table testUser.service_subscription access to table testUser.service_instance access to table testUser.sa_ordnance_weapon_type access to table testUser.runway access to table testUser.restricted_codes access to table testUser.response_entity access to table testUser.residual_mission access to table testUser.request_objective access to table testUser.request and 194 other objects (see server log for list)

  Read the article

• Linked Tables not working With Access Database

  - by Kronass

  Hi, I have an Access database in a computer and I want to access it from other computer in the network. so I made mapped drive and created Linked Tables, then Imported all the objects (forms, queries, reports). when I open access database in the second computer and make any changes in using the forms non of the changes are affected in the main computer (supposedly server) and vise-versa. what am I missing? if this way will not work how can I access the Access database from other computer in the network and be able to use all the objects and make changes in it? hint: Access Version at main computer is 2003 and client pc 2007, will it effect?

  Read the article

• Fitting it together, database, reporting, applications in C#

  - by alvonellos

  Introduction Preamble I was hesitant to post this, since it's an application whose intricate details are defined elsewhere, and answers may not be helpful to others. Within the past few weeks (I was actually going to write a blog post about this after I finished) I've discovered that the barrier I'm encountering is one that's actually quite common for newer developers. This question is not so much about a specific thing as it is about piecing those things together. I've searched the internet far and wide, and found many tutorials on how to create applications that are kind of similar to what I'm looking for. I've also looked at hiring another, more experienced, developer to help me along, but all I've gotten are unqualified candidates that don't have the experience necessary and won't take care of the client or project like I will. I'd rather have the project never transpire than to release a solution that is half-baked. I've asked professors at my school, but they've not turned up answers to my question. I'm an experienced developer, and I've written many applications that are -- very abstractly -- close to what I'm doing, but my experiences from those applications aren't giving me enough leverage to solve this particular problem. I just hope that posting this article isn't a mistake for me to write. Project Description I have a project I'm working on for a client that is a rewrite of an application, originally written in Foxpro 2.6 by someone before me, that performs some analysis (which, sadly, I'm not allowed to disclose as per of my employment contract) on financial data. One day, after a long talk between the client and I -- where he intimately described his frustrations with all the bugs I've been hacking out of this code for 6 months now -- he told me to just rewrite it and gave me a month to write a good 1/8 of this 65k LOC Foxpro monstrosity. this 65k line of code foxpro monstrosity. It'll take me a good 3 - 6 months to rewrite this software (I know things the original programmer did not, like inheritance) going as I am right now, but I'm quickly discovering that I'm going to need to use databases. Prior to this contract I didn't even know about foxpro, and so I've had to learn foxpro on the fly, write procedures and make modifications to the database. I've actually come to like it, and this project would be rewritten in Foxpro if it were still a supported language, because over the past few months, I've come to like the features of Foxpro that make it so easy to develop data-driven applications. I once perfomed an experiment, comparing C# to Foxpro. What took me 45 minutes in C# took me two in Foxpro, and I knew C# prior to Foxpro. I was hoping to leverage the power of C#, but it intimidates me that in foxpro, you can have one line of code and be using a database. Prior to this, I have never written any serious database development from scratch. All the applications that I've written are in a different league. They are either completely data-naive or data-naive enough that I can get away with not using a database through serialization or by designing algorithms that work with the data in a manner that is stateless, so there is no need to worry about databases. I've come to realize, very quickly, that serialization and my efficacy with data structures has been my crutch all these years that's prevented me from adventuring into databases, and has consequently hindered my success in real-world programming. Sure, I've written some database stuff in Perl and Python, and I've done forms and worked with relational databases and tables, I'm a wizard in Access and Excel (seriously) and can do just about anything, but it just feels unnatural writing SQL code in another language... I don't mind writing SQL, and I don't It's that bridge between the database and the program code that drives me absolutely bonkers. I hope I'm not the only one to think this, but it bothers me that I have to create statements like the following string sSql = "SELECT * from tablename" When there's really no reason for that kind of unchecked language binding between two languages and two API's. Don't get my wrong, SQL is great, but I don't like the idea that, when executing commands on a SQL database, that one must intermix database and application software, and there's no database independence, which means that different versions of different databases can break code. This isn't very nice. The nicest thing about Foxpro is the cohesiveness between programming language and database. It's so easy, and Foxpro makes it easy, because the tool just fits the task. I can see why so many developers have created a career with this language, because it lowered the barrier of entry to data-driven applications that so many businesses need. It was wonderful. For my purposes today, with the demands and need for community support, extensibility, and language features, Foxpro isn't a solution that I feel would be the right tool for the job. I'm also worried about working too heavy with the database, because I've seen data-driven .NET applications have issues with database caches, running out of memory, and objects in the database not being collected. (Memory leaks) And OH the queries. Which one, how, and why? There are a plethora of different ways that a database can be setup, I think I counted 5 or 6 different kinds of database applications alone that I can chose from. That is a great mountain for me to climb when I don't even know where to begin when it comes to writing data-driven applications. The problem isn't that I don't know SQL or that I don't know C#. I know both and have worked with both extensively. It's making them work together that's the problem, and it's something I've never done in C# before. Reports The client likes paper. The data needs to be printed out in a format that is extensible, layered, and easy to use. I have never done reporting before, and so this is a bit of a problem. From the data source comes crystal reports, and so there's a dependency on the database, from what I understand. Code reuse A large part of the design decision that I've gone through so far is to break the task of writing a piece of this software into routines and modular DLL's and so forth such that much of the code can be reused. For example, when I setup this database, I want to be able to reuse the same database code over and over again. I also want to make sure that when the day comes that another developer is here, that he/she will be able to pick up just where I left off. The quicker I develop these applications, the better off I am. Tasks & Goals In my project, I need to write routines that apply algorithms and look for predefined patterns in financial data. Additionally, I need to simulate trading based on predefined algorithms and data. Then I need to prepare reports on that data. Additionally, I need to have a way to change the code base for this application quickly and effectively, without hacking together some band-aid solution for a problem that really needs a trauma ward. Special Considerations The solution must be fast, run quickly on existing hardware, and not be too much of a pain to maintain and write. I understand that anything I write I'm married to -- I'm responsible for the things that I write because my reputation and livelihood is dependent on it. Do I really need a database? What about performance? Performance was such a big issue that I hand wrote a data structure that is capable of performing 2 billion operations, using a total of 4 gigs of memory in under 1/4 of a second using the standard core two duo processor. I could not find a similar, pre-written data structure in C# to perform this task. What setup do I use in terms of database? What about reporting? I'd prefer to have PDF's generated, but I'd like to be able to visually sketch those reports and then just have a ReportFactory of some sort, that when I pass some variables in, it just does that data. About Me I'm a lone developer for a small business in this area. This is the first time I've done this and I've never had the breadth and depth of my knowledge tested. I'm incredibly frustrated with this project because I feel incredibly overwhelmed with the task at hand. I'm looking for that entry level point where I can draw a line and say "this is what I need to do" Conclusion I may have not been clear enough on my post. I'm still new to this whole thing, and I've been doing my best to contribute back to the community that I've leached so much knowledge from. I'd be glad to edit my post and add more information if possible. I'm looking for a big-picture solution or design process that helps me get off the ground in this world of data-driven applications, because I have a feeling that it's going to be concentric to my entire career as a programmer for some time. Specifically, if you didn't get it from the rest of the post (I may not have been clear enough) I really need some guidance as to where to go in terms of the design decisions for this project. Some things that'll be useful will be a pro/con list for the different kinds of database projects available in VS2010. I've tried, but generating that list has been as hard as solving the problem itself... If you could walk a developer writing a data-driven application for the first time in C#, how would you do that? Where would you point them to?

  Read the article

• ???????/??????! Oracle Database 11g R2 ???????

  - by Yusuke.Yamamoto

  ????? ??:2010/11/17 ??:??????/?? 2009?9?? Oracle Database ?????Oracle Database 11g Release 2???????????1???????!??????????????????·??????????????????????????????????????????????????????????!??????????????????????????????????! Oracle Database 11g R2 ????Oracle Database 11g R2 ?????????? ????????? ????????????????? http://www.oracle.com/technology/global/jp/ondemand/otn-seminar/pdf/20101117_11gR2.pdf

  Read the article

• Database model for keeping track of likes/shares/comments on blog posts over time

  - by gage

  My goal is to keep track of the popular posts on different blog sites based on social network activity at any given time. The goal is not to simply get the most popular now, but instead find posts that are popular compared to other posts on the same blog. For example, I follow a tech blog, a sports blog, and a gossip blog. The tech blog gets waaay more readership than the other two blogs, so in raw numbers every post on the tech blog will always out number views on the other two. So lets say the average tech blog post gets 500 facebook likes and the other two get an average of 50 likes per post. Then when there is a sports blog post that has 200 fb likes and a gossip blog post with 300 while the tech blog posts today have 500 likes I want to highlight the sports and gossip blog posts (more likes than average vs tech blog with more # of likes but just average for the blog) The approach I am thinking of taking is to make an entry in a database for each blog post. Every x minutes (say every 15 minutes) I will check how many likes/shares/comments an entry has received on all the social networks (facebook, twitter, google+, linkeIn). So over time there will be a history of likes for each blog post, i.e post 1234 after 15 min: 10 fb likes, 4 tweets, 6 g+ after 30 min: 15 fb likes, 15 tweets, 10 g+ ... ... after 48 hours: 200 fb likes, 25 tweets, 15 g+ By keeping a history like this for each blog post I can know the average number of likes/shares/tweets at any give time interval. So for example the average number of fb likes for all blog posts 48hrs after posting is 50, and a particular post has 200 I can mark that as a popular post and feature/highlight it. A consideration in the design is to be able to easily query the values (likes/shares) for a specific time-frame, i.e. fb likes after 30min or tweets after 24 hrs in-order to compute averages with which to compare against (or should averages be stored in it's own table?) If this approach is flawed or could use improvement please let me know, but it is not my main question. My main question is what should a database scheme for storing this info look like? Assuming that the above approach is taken I am trying to figure out what a database schema for storing the likes over time would look like. I am brand new to databases, in doing some basic reading I see that it is advisable to make a 3NF database. I have come up with the following possible schema. Schema 1 DB Popular Posts Table: Post post_id ( primary key(pk) ) url title Table: Social Activity activity_id (pk) url (fk) type (i.e. facebook,twitter,g+) value timestamp This was my initial instinct (base on my very limited db knowledge). As far as I under stand this schema would be 3NF? I searched for designs of similar database model, and found this question on stackoverflow, http://stackoverflow.com/questions/11216080/data-structure-for-storing-height-and-weight-etc-over-time-for-multiple-users . The scenario in that question is similar (recording weight/height of users overtime). Taking the accepted answer for that question and applying it to my model results in something like: Schema 2 (same as above, but break down the social activity into 2 tables) DB Popular Posts Table: Post post_id (pk) url title Table: Social Measurement measurement_id (pk) post_id (fk) timestamp Table: Social stat stat_id (pk) measurement_id (fk) type (i.e. facebook,twitter,g+) value The advantage I see in schema 2 is that I will likely want to access all the values for a given time, i.e. when making a measurement at 30min after a post is published I will simultaneous check number of fb likes, fb shares, fb comments, tweets, g+, linkedIn. So with this schema it may be easier get get all stats for a measurement_id corresponding to a certain time, i.e. all social stats for post 1234 at time x. Another thought I had is since it doesn't make sense to compare number of fb likes with number of tweets or g+ shares, maybe it makes sense to separate each social measurement into it's own table? Schema 3 DB Popular Posts Table: Post post_id (pk) url title Table: fb_likes fb_like_id (pk) post_id (fk) timestamp value Table: fb_shares fb_shares_id (pk) post_id (fk) timestamp value Table: tweets tweets__id (pk) post_id (fk) timestamp value Table: google_plus google_plus_id (pk) post_id (fk) timestamp value As you can see I am generally lost/unsure of what approach to take. I'm sure this typical type of database problem (storing measurements overtime, i.e temperature statistic) that must have a common solution. Is there a design pattern/model for this, does it have a name? I tried searching for "database periodic data collection" or "database measurements over time" but didn't find anything specific. What would be an appropriate model to solve the needs of this problem?

  Read the article

• Examples of temporal database designs? [closed]

  - by miku

  I'm researching various database design for historical record keeping - because I would like to implement a prototypical web application that (excessively) tracks changes made by users and let them undo things, see revisions, etc. I'd love use mercurial or git as backend (with files as records) - since they already implement the kind of append-only changes I imagine. I tried git and dulwich (python git API) - and it went ok - but I was concerned about performance; Bi-temporal database design lets you store a row along with time periods, when this record was valid. This sure sound more performant than to operate on files on disk (as in 1.) - but I had little luck finding real-world examples (e.g. from open source projects), that use this kind of design and are approachable enough to learn from them. Revisions à la MediaWiki revisions or an extra table for versions, as in Redmine. The problem here is, that DELETE would take the whole history with it. I looked at NoSQL solutions, too. With a document oriented approach, it would be simple to just store the whole history of an entity within the document itself - which would reduce design plus implementation time in contrast to a RDBMS approach. However, in this case I'm a bit concerned about ACID-properties, which would be important in the application. I'd like ask about experiences about real-world and pragmatic designs for temporal data.

  Read the article

• How to design database for tests in online test application

  - by Kien Thanh

  I'm building an online test application, the purpose of app is, it can allow teacher create courses, topics of course, and questions (every question has mark), and they can create tests for students and students can do tests online. To create tests of any courses for students, first teacher need to create a test pattern for that course, test pattern actually is a general test includes the number of questions teacher want it has, then from that test pattern, teacher will generate number of tests corresponding with number of students will take tests of that course, and every test for student will has different number of questions, although the max mark of test in every test are the same. Example if teacher generate tests for two students, the max mark of test will be 20, like this: Student A take test with 20 questions, student B take test only has 10 questions, it means maybe every question in test of student A only has mark is 1, but questions in student B has mark is 2. So 20 = 10 x 2, sorry for my bad English but I don't know how to explain it better. I have designed tables for: - User (include students and teachers account) - Course - Topic - Question - Answer But I don't know how to define associations between user and test pattern, test, question. Currently I only can think these: Test pattern table: name, description, dateStart, dateFinish, numberOfMinutes, maxMarkOfTest Test table: test_pattern_id And when user (is Student) take tests, I think i will have one more table: Result: user_id, test_id, mark but I can't set up associations among test pattern and test and question. How to define associations?

  Read the article

• MS Access 2003 - Embedded Excel Spreadsheet on Access form

  - by Justin

  lets say I have an embedded Excel Spreadsheet on a Microsoft Access form. I call the object frame ExcelFrame and I add a text box on the form called txtA1 and I add a button on the form called cmdInsert I want to type "Hello World" into the text box, click the button and have it appear in the A1 cell on that spreadsheet. What VBA do I use to accomplish this? Thanks

  Read the article

• Generating a twitter OAuth access key - the semi-manual way

  - by Piet

  [UPDATE] Apparently someone at Twitter was listening, or I’m going senile/blind. Let’s call it a combination of both. Instead of following all the steps below, you could just login with the Twitter account you want to use on http://dev.twitter.com, register your application and then click ‘Edit Details’ on the application overview page at http://dev.twitter.com/apps. Next click the ‘Application detail’ button on the right, followed by the ‘My Access Token’ button in order to get your Access Token and Access Token Secret. This makes the old post below rather obsolete. Clearly a case of me thinking everything is a nail and ruby is a hammer (don’t they usually say this about java coders?) [ORIGINAL POST] OAuth is great! OAuth allows your application to use your user’s data without the need to ask for their password. So Twitter made the API much safer for their and your users. Hurray! Free pizza for everyone! Unless of course you’re using the Twitter API for your own needs like running your own bot and don’t need access to other user’s data. In such cases a simple username/password combination is more than enough. I can understand however that the Twitter guys don’t really care that much about these exceptions(?). Most such uses for the API are probably rather spammy in nature. !!! If you have a twitter app that uses the API to access external user’s data: look for another solution. This solution is ONLY meant when you ONLY need access to your own account(s) through the API. Other Solutions Mr Dallas Devries posted a solution here which involves requesting and scraping a one-time PIN. But: I like to minimize the amount of calls I make to twitter’s API or pages to lessen my chances of meeting the fail whale. Also, as soon as the pin isn’t included in a div called ‘oauth_pin’ anymore, this will fail. However, mr Devries’ post was a starting point for my solution, so I’m much obliged to him posting his findings. Authenticating with the Twitter API: old vs new Acessing The Twitter API the old way: require ‘twitter’ httpauth = Twitter::HTTPAuth.new('my_account','my_secret_password') client = Twitter::Base.new(httpauth) client.update(‘Hurray!’) The OAuth way: require 'twitter' oauth = Twitter::OAuth.new('ve4whatafuzzksaMQKjoI', 'KliketyklikspQ6qYALcuNandsomemored8pQ6qYALIG7mbEQY') oauth.authorize_from_access('123-owhfmeyAgfozdyt5hDeprSevsWmPo5rVeroGfsthis', 'fGiinCdqtehMeehiddenymDeAsasaawgGeryye8amh') client = Twitter::Base.new(oauth) client.update(‘Hurray!’) In the above case, ve4whatafuzzksaMQKjoI is the ‘consumer key’ (sometimes also referred to as ‘consumer token’) and KliketyklikspQ6qYALcuNandsomemored8pQ6qYALIG7mbEQY is the ‘consumer secret’. You’ll get these from Twitter when you register your app. 123-owhfmeyAgfozdyt5hDeprSevsWmPo5rVeroGfsthis is the ‘access token’ and fGiinCdqtehMeehiddenymDeAsasaawgGeryye8amh is the ‘access secret’. This combination gives the registered application access to your account. I’ll show you how to obtain these by following the steps below. (Basically you’ll need a bunch of keys and you’ll have to jump a bit through hoops to obtain them for your server/bot. ) How to get these keys 1. Surf to the twitter apps registration page go to http://dev.twitter.com/apps to register your app. Login with your twitter account. 2. Register your application Enter something for Application name, Description, website,… as I said: they make you jump through hoops. If you plan on using the API to post tweets, Your application name and website will be used in the ‘5 minutes ago via…’ line below your tweet. You could use the this to point to a page with info about your bot, or maybe it’s useful for SEO purposes. For application type I choose ‘browser’ and entered http://www.hadermann.be/callback as a ‘Callback URL’. This url returns a 404 error, which is ideal because after giving our account access to our ‘application’ (step 6), it will redirect to this url with an ‘oauth_token’ and ‘oauth_verifier’ in the url. We need to get these from the url. It doesn’t really matter what you enter here though, you could leave it blank because you need to explicitely specify it when generating a request token. You probably want read&write access so set this at ‘Default Access type’. 3. Get your consumer key and consumer secret On the next page, copy/paste your ‘consumer key’ and ‘consumer secret’. You’ll need these later on. You also need these as part of the authentication in your script later on: oauth = Twitter::OAuth.new([consumer key], [consumer secret]) 4. Obtain your request token run the following in IRB to obtain your ‘request token’ Replace my fake consumer key and consumer secret with the one you obtained in step 3. And use something else instead http://www.hadermann.be/callback: although this will only give a 404, you shouldn’t trust me. irb(main):001:0> require 'oauth' irb(main):002:0> c = OAuth::Consumer.new('ve4whatafuzzksaMQKjoI', 'KliketyklikspQ6qYALcuNandsomemored8pQ6qYALIG7mbEQY', {:site => 'http://twitter.com'}) irb(main):003:0> request_token = c.get_request_token(:oauth_callback => 'http://www.hadermann.be/callback') irb(main):004:0> request_token.token => "UrperqaukeWsWt3IAlfbxzyBUFpwWIcWkHP94QH2C1" This (UrperqaukeWsWt3IAlfbxzyBUFpwWIcWkHP94QH2C1) is the request token: Copy/paste this token, you will need this next. 5. Authorize your application surf to https://api.twitter.com/oauth/authorize?oauth_token=[the above token], for example: https://api.twitter.com/oauth/authorize?oauth_token=UrperqaukeWsWt3IAlfbxzyBUFpwWIcWkHP94QH2C1 This will bring you to the ‘An application would like to connect to your account’- screen on Twitter where you can grant access to the app you just registered. If you aren’t still logged in, you need to login first. Click ‘Allow’. Unless you don’t trust yourself. 6. Get your oauth_verifier from the redirected url Your browser will be redirected to your callback url, with an oauth_token and oauth_verifier parameter appended. You’ll need the oauth_verifier. In my case the browser redirected to: http://www.hadermann.be/callback?oauth_token=UrperqaukeWsWt3IAlfbxzyBUFpwWIcWkHP94QH2C1&oauth_verifier=waoOhKo8orpaqvQe6rVi5fti4ejr8hPeZrTewyeag Which returned a 404, giving me the chance to copy/paste my oauth_verifier: waoOhKo8orpaqvQe6rVi5fti4ejr8hPeZrTewyeag 7. Request an access token Back to irb, use the oauth_verifier to request an access token, as follows: irb(main):005:0> at = request_token.get_access_token(:oauth_verifier => 'waoOhKo8orpaqvQe6rVi5fti4ejr8hPeZrTewyeag') irb(main):006:0> at.params[:oauth_token] => "123-owhfmeyAgfozdyt5hDeprSevsWmPo5rVeroGfsthis" irb(main):007:0> at.params[:oauth_token_secret] => "fGiinCdqtehMeehiddenymDeAsasaawgGeryye8amh" We’re there! 123-owhfmeyAgfozdyt5hDeprSevsWmPo5rVeroGfsthis is the access token. fGiinCdqtehMeehiddenymDeAsasaawgGeryye8amh is the access secret. Try it! Try the following to post an update: require 'twitter' oauth = Twitter::OAuth.new('ve4whatafuzzksaMQKjoI', 'KliketyklikspQ6qYALcuNandsomemored8pQ6qYALIG7mbEQY') oauth.authorize_from_access('123-owhfmeyAgfozdyt5hDeprSevsWmPo5rVeroGfsthis', 'fGiinCdqtehMeehiddenymDeAsasaawgGeryye8amh') client = Twitter::Base.new(oauth) client.update(‘Cowabunga!’) Now you can go to your twitter page and delete the tweet if you want to.

  Read the article

• VBA for Access 2003 - DDL help with creating access file: setting the Autonumber data type

  - by Justin

  So I have the below VB that creates an access file in the default workspace, creates a table, create some fields in that table...just need to know the syntax for setting the first data type/field to autonumber...GUID, Counter, etc will not work as in Access SQL ' error handling usually goes here dim ws as workspace dim dbExample as database dim tblMain as TableDef dim fldMain as Field dim idxMain as Index set ws = workspace(0) set dbExample = ws.CreateDatabase('string file path') set tblMain = dbExample.CreateTableDef("tblMain") set fldMain = tblMain.CreateField("ID", 'right here I do not know what to substitute for dbInteger to get the autonumber type to work ) tblMain.Fields.Append fldMain etc to create other fields and indexes so in this line: set fldMain = tblMain.CreateField("ID", dbInteger) i need to replace the dbInteger with something that VB reconizes as the autonumber property. i have tried GUID, Counter, Autonumber, AutoIncrement....unfortunately none of these work anyone know the syntax I am missing here? Thanks, Justin

  Read the article

• Using a PivotTable to Count Items in Access

  - by Sandra

  I have a list of text entries and I want to count how often each entry appears in the list. e.g. Berlin Paris London London Paris Paris Paris The result would be Berlin 1 Paris 4 London 2 This result easy do to achieve with an pivot table in MS Excel (see: Count Items in Excel). My data not in spreadsheet in Excel but in a MS Access database table. So in order to avoid constant switching between Access and Excel and I would like to handle everything in Access (either Access 2007 or 2010). I know there are pivot tables in Access and I know how to display one, but I was unable to find out how to count the number of occurrences. Thank you!

  Read the article

• Access Creates new file every time I Compact & Repair

  - by NickSentowski

  It didn't always do this, but ever since I split my database and made the front-end an ACCDE file, any time I try to compact and repair either file, a new file called "Database 1" is generated and my original file size doesn't change. Is this normal? My ACCDB is roughly 20MB, and my ACCDE is just over 1M after being used the first time. Before opening, the ACCDE was only 600k (I have lots of forms and queries, and regularly store PDF attachments.

  Read the article

• (Database Design - products attributes): What is better option for product attribute database design

  - by meyosef

  Hi, I new in database design. What is better option for product attribute database design for cms?(Please suggest other options also). option 1: 1 table products{ id product_name color price attribute_name1 attribute_value1 attribute_name2 attribute_value2 attribute_name3 attribute_value3 } option 2: 3 tables products{ id product_name color price } attribute{ id name value } products_attribute{ products_id attribute_id } Thanks, Yosef

  Read the article

• Database Vault 11gR2 11.2.0.1 Certified with Oracle E-Business Suite

  - by Steven Chan

  Oracle Database Vault allows security administrators to protect a database from privileged account access to application data.  Database objects can be placed in protected realms, which can be accessed only if a specific set of conditions are met.  Oracle Database Vault 11gR2 11.2.0.1 is now certified with Oracle E-Business Suite Release 11i and 12.You can now enable Database Vault 11gR2 on your existing E-Business Suite 11.2.0.1 Database instance.  If you already have DB Vault 10gR2 or 11gR1 enabled in your E-Business Suite environment, you can now upgrade to the 11gR2 Database.  We also support EBS patching with Database Vault 11.2.0.1 enabled. Our DB Vault realm creation and grants-related scripts have been updated to reduce patching downtimes.

  Read the article

• Help With Database Layout

  - by three3

  Hello everyone, I am working on a site similar to Craigslist where users can make postings and sell items in different cities. One difference between my site and Craigslist will be you will be able to search by zip code instead of having all of the cities listed on the page. I already have the ZIP Code database that has all of the city, state, latitude, longitude, and zip code info for each city. Okay, so to dive into what I need done and what I need help with: 1.) Although I have the ZIP Code database, it is not setup perfectly for my use. (I downloaded it off of the internet for free from http://zips.sourceforge.net/) 2.) I need help setting up my database structure (Ex: How many different tables should I use and how should I link them) I will be using PHP and MySQL. These our my thoughts so far on how the database can be setup: (I am not sure if this will work though.) Scenario: Someone goes to the homepage and it will tell them, "Please enter your ZIP Code.". If they enter "17241" for example, this ZIP Code is for a city named Newville located in Pennsylvania. The query would look like this with the current database setup: SELECT city FROM zip_codes WHERE zip = 17241; The result of the query would be "Newville". The problem I see here now is when they want to post something in the Newville section of the site, I will have to have an entire table setup just for the Newville city postings. There are over 42,000 cities which means I would have to have over 42,000 tables (one for each city) so that would be insane to have to do it that way. One way I was thinking of doing it was to add a column to the ZIP Code database called "city_id" which would be a unique number assigned to each city. So for example, the city Newville would have a city_id of 83. So now if someone comes and post a listing in the city Newville I would only need one other table. That one other table would be setup like this: CREATE TABLE postings ( posting_id INT NOT NULL AUTO_INCREMENT, for_sale LONGTEXT NULL, for_sale_date DATETIME NULL, for_sale_city_id INT NULL, jobs LONGTEXT NULL, jobs_date DATETIME NULL, jobs_city_id INT NULL, PRIMARY KEY(posting_id) ); (The for_sale and job_ column names are categories of the types of postings users will be able to list under. There will be many more categories than just those two but this is just for example.) So now when when someone comes to the website and they are looking for something to buy and not sell, they can enter their ZIP Code, 17241, for example, and this is the query that will run: SELECT city, city_id FROM zip_codes WHERE zip = 17241; //Result: Newville 83 (Please note that I will be using PHP to store the ZIP Code the user enters in SESSIONS and Cookies to remember them throughout the site) Now it will tell them, "Please choose your category.". If they choose the category "Items For Sale" then this is the query to run and sort the results: SELECT posting_id, for_sale, for_sale_date FROM postings WHERE for_sale_city_id = $_SESSION['zip_code']; Will this work? So now my question to everyone is will this work? I am pretty sure it will but I do not want to set this thing up and realize I overlooked something and have to start from all over from scratch. Any opinions and ideas are welcomed and I will listen to anyone who has some thoughts. I really appreciate the help in advance :D

  Read the article

• MS Access: index optimisation

  - by Patrick Honorez

  Let's say we have a [Valuations] table containing several values per date and per fund: -FundId -ValDate -Value1 -Value2... The Primary key is obviously FundId+ValDate. I have also indexed the ValDate field since I often query for values on a specific date. My question is: should I also create a specific index for the FundId, or is MsAccess clever enough to use the Primary key when querying on a specific FundId ?

  Read the article

• Database Memory :: MySql Innodb how much storage memory allocation for empty field vs not empty fie

  - by Yosef

  Hi, I new in database, and dont know how and when mysql allocate memory space. In MySql Innodb how much storage memory allocation for empty field (no string inserted) vs not empty field? Other form of my question: When memory allocated space In MySql Innodb for varchar/text field in time of table creation or when data inserted inside field? Thank you, Yosef

  Read the article

• Methodologies for Managing Users and Access?

  - by MadBurn

  This is something I'm having a hard time getting my head around. I think I might be making it more complicated than it is. What I'm trying to do is develop a method to store users in a database with varying levels of access, throughout different applications. I know this has been done before, but I don't know where to find how they did it. Here is an example of what I need to accomplish: UserA - Access to App1, App3, App4 & can add new users to App3, but not 4 or 1. UserB - Access to App2 only with ReadOnly access. UserC - Access to App1 & App4 and is able to access Admin settings of both apps. In the past I've just used user groups. However, I'm reaching a phase where I need a bit more control over each individual user's access to certain parts of the different applications. I wish this were as cut and dry as being able to give a user a role and let each role inherit from the last. Now, this is what I need to accomplish. But, I don't know any methods of doing this. I could easily just design something that works, but I know this has been done and I know this has been studied and I know this problem has been solved by much better minds than my own. This is for a web application and using sql server 2008. I don't need to store passwords (LDAP) and the information I need to store is actually very limited. Basically just username and access.

  Read the article

• SQL SERVER Retrieve and Explore Database Backup without Restoring Database Idera virtual database

  I recently downloaded Ideras SQL virtual database, and tested it. There are a few things about this tool which caught my attention.My ScenarioIt is quite common in real life that sometimes observing or retrieving older data is necessary; however, it had changed as time passed by. The full database backup was 40 GB in size, [...]...Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• Transportable Database 11gR2 Certified with E-Business Suite

  - by Steven Chan

  Platform migration is the process of moving a database from one operating system platform to a different operating system platform. You might wish to migrate your E-Business Suite database to create testing instances, experiment with new architectures, perform benchmarks, or prepare for actual platform changes in your production environment. Database migration across platforms of the same "endian" format (byte ordering) using the Transportable Database (TDB) process is now certified with Oracle Database 11gR2 (11.2.0.1) for:Oracle E-Business Suite Releases 11i (11.5.10.2) Oracle E-Business Suite Release 12.0.4 or higherOracle E-Business Suite Release 12.1.1 or higherThis EBS database migration process was previously certified only for 10gR2 and 11gR1.

  Read the article

• Database Trends & Applications column: Database Benchmarking from A to Z

  - by KKline

  Have you heard of the monthly print and web magazine Database Trends & Applications (DBTA)? Did you know I'm the regular columnist covering SQL Server ? For the past six months, I've been writing a series of articles about database benchmarking culminating in the latest article discussing my three favorite database benchmarking tools: the free, open-source HammerDB, the native SQL Server Distributed Replay Utility, and the commercial Benchmark Factory from Dell / Quest Software. Wondering what...(read more)

  Read the article

• How do I create an Access 2003 MDE programmatically or by command line in Access 2007?

  - by Ned Ryerson

  I have a legacy Access 2003 database file that must remain in that format to preserve its menus and toolbars. I have recently moved to Access 2007 in my build environment and will be deploying the compiled Access 2003 program with the Access 2007 runtime. In Access 2003, I could script the process of creating an MDE with the Access Developer Extensions (WZADE.mde) using the command line and an .xml file of build preferences (without creating an install package). The Access 2007 developer extensions do not seem to offer a similar option. I can "Package a Solution", but it creates an accdr and buries it in a CD installer. I've tried programmatic options like Docmd.RunCommand acMakeMDEFILe and Syscmd(603, mdbpath, mdepath) but they no longer work in Access 2007. Of course, i can manually create an MDE using Database ToolsCreate MDE, but that is no scriptable as far as I can tell.

  Read the article

• Reminder: Premier Support for 10gR2 10.2.0.4 Database ends July 2010

  - by Steven Chan

  Regular readers know that Premier Support for the Oracle 10gR2 Database ends in July 2010, a scant few months from now.  What does that mean for E-Business Suite environments running on this database?The Oracle E-Business Suite is comprised of products like Financials, Supply Chain, Procurement, and so on.  Support windows for the E-Business Suite and these associated applications products are listed here:Oracle Lifetime Support > "Lifetime Support Policy: Oracle Applications" (PDF)The Oracle E-Business Suite can run on a variety of database releases, including 10gR2, 11gR1, and 11gR2.  Support windows for database releases are listed here:Oracle Lifetime Support > "Lifetime Support Policy: Oracle Technology Products" (PDF)Looking at those two documents together, you'll see that:Premier Support for Oracle E-Business Suite Release 11i ends on November 30, 2010Premier Support for Oracle E-Business Suite Release 12 ends on January 31, 2012Premier Support for Oracle E-Business Suite Release 12.1 ends on May 31, 2014Premier Support for Oracle Database 10.2 (a.k.a. 10gR2) ends on July 31, 2010[Note: These are the Premier Support dates as of today.  If you've arrived at this article in the future via a search engine, you must check the latest dates in the Lifetime Support Policy documents above; these dates are subject to change.]It's a bit hard to read, thanks to the layout restrictions of this blog, but the following diagram shows the Premier and Extended Support windows for the last four major database releases certified with Apps 11i:Do the EBS Premier Support dates trump the 10gR2 DB date?No.  Each of the support policies apply individually to your combined EBS + DB configuration.  The support dates for a given EBS release don't override the Database support policy.

  Read the article

1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >