Search Results

Search found 42428 results on 1698 pages for 'database query'.

Page 1/1698 | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

• SQL SERVER – Retrieve and Explore Database Backup without Restoring Database – Idera virtual databas

  - by pinaldave

  I recently downloaded Idera’s SQL virtual database, and tested it. There are a few things about this tool which caught my attention. My Scenario It is quite common in real life that sometimes observing or retrieving older data is necessary; however, it had changed as time passed by. The full database backup was 40 GB in size, and, to restore it on our production server, it usually takes around 16 to 22 minutes, depending on the load server that is usually present. This range in time varies from one server to another as per the configuration of the computer. Some other issues we used to have are the following: When we try to restore a large 40-GB database, we needed at least that much space on our production server. Once in a while, we even had to make changes in the restored database, and use the said changed and restored database for our purpose, making it more time-consuming. My Solution I have heard a lot about the Idera’s SQL virtual database tool.. Well, right after we started to test this tool, we found out that it really delivers what it promises. Using this software was very easy and we were able to restore our database from backup in less than 2 minutes, sparing us from the usual longer time of 16–22 minutes. The needful was finished in a total of 10 minutes. Another interesting observation is that there is no need to have an additional space for restoring the database. For complete database restoration, the single additional MB on the drive is not required anymore. We can use the database in the same way as our regular database, and there is no need for any additional configuration and setup. Let us look at the most relevant points of this product based on my initial experience: Quick restoration of the database backup No additional space required for database restoration virtual database has no physical .MDF or .LDF The database which is restored is, in fact, the backup file converted in the virtual database. DDL and DML queries can be executed against this virtually restored database. Regular backup operation can be implemented against virtual database, creating a physical .bak file that can be used for future use. There was no observed degradation in performance on the original database as well the restored virtual database. Additional T-SQL queries can be let off on the virtual database. Well, this summarizes my quick review. And, as I was saying, I am very impressed with the product and I plan to explore it more. There are many features that I have noticed in this tool, which I think can be very useful if properly understood. I had taken a few screenshots using my demo database afterwards. Let us see what other things this tool can do besides the mentioned activities. I am surprised with its performance so I want to know how exactly this feature works, specifically in the matter of why it does not create any additional files and yet, it still allows update on the virtually restored database. I guess I will have to send an e-mail to the developers of Idera and try to figure this out from them. I think this tool is very useful, and it delivers a high level of performance way more than what I expected. Soon, I will write a review for additional uses of SQL virtual database.. If you are using SQL virtual database in your production environment, I am eager to learn more about it and your experience while using it. The ‘Virtual’ Part of virtual database When I set out to test this software, I thought virtual database had something to do with Hyper-V or visualization. In fact, the virtual database is a kind of database which shows up in your SQL Server Management Studio without actually restoring or even creating it. This tool creates a database in SSMS from the backup of the same database. The backup, however, works virtually the same way as original database. Potential Usage of virtual database: As soon as I described this tool to my teammate, I think his very first reaction was, “hey, if we have this then there is no need for log shipping.” I find his comment very interesting as log shipping is something where logs are moved to another server. In fact, there are no updates on the database from log; I would rather compare it with Snapshot Replication. In fact, whatever we use, snapshot replicated database can be similarly used and configured with virtual database. I totally believe that we can use it for reporting purpose. In fact, after this database was configured, I think the uses of this tool are unlimited. I will have to spend some more time studying it and will get back to you. Click on images to see larger images. virtual database Console Harddrive Space before virtual database Setup Attach Full Backup Screen Backup on Harddrive Attach Full Backup Screen with Settings virtual database Setup – less than 60 sec virtual database Setup – Online Harddrive Space after virtual database Setup Point in Time Recovery Option – Timeline View virtual database Summary No Performance Difference between Regular DB vs Virtual DB Please note that all SQL Server MVP gets free license of this software. Reference: Pinal Dave (http://blog.SQLAuthority.com), Idera (virtual database) Filed under: Database, Pinal Dave, SQL, SQL Add-On, SQL Authority, SQL Backup and Restore, SQL Data Storage, SQL Query, SQL Server, SQL Tips and Tricks, SQL Utility, SQLAuthority News, T SQL, Technology Tagged: Idera

  Read the article

• Fitting it together, database, reporting, applications in C#

  - by alvonellos

  Introduction Preamble I was hesitant to post this, since it's an application whose intricate details are defined elsewhere, and answers may not be helpful to others. Within the past few weeks (I was actually going to write a blog post about this after I finished) I've discovered that the barrier I'm encountering is one that's actually quite common for newer developers. This question is not so much about a specific thing as it is about piecing those things together. I've searched the internet far and wide, and found many tutorials on how to create applications that are kind of similar to what I'm looking for. I've also looked at hiring another, more experienced, developer to help me along, but all I've gotten are unqualified candidates that don't have the experience necessary and won't take care of the client or project like I will. I'd rather have the project never transpire than to release a solution that is half-baked. I've asked professors at my school, but they've not turned up answers to my question. I'm an experienced developer, and I've written many applications that are -- very abstractly -- close to what I'm doing, but my experiences from those applications aren't giving me enough leverage to solve this particular problem. I just hope that posting this article isn't a mistake for me to write. Project Description I have a project I'm working on for a client that is a rewrite of an application, originally written in Foxpro 2.6 by someone before me, that performs some analysis (which, sadly, I'm not allowed to disclose as per of my employment contract) on financial data. One day, after a long talk between the client and I -- where he intimately described his frustrations with all the bugs I've been hacking out of this code for 6 months now -- he told me to just rewrite it and gave me a month to write a good 1/8 of this 65k LOC Foxpro monstrosity. this 65k line of code foxpro monstrosity. It'll take me a good 3 - 6 months to rewrite this software (I know things the original programmer did not, like inheritance) going as I am right now, but I'm quickly discovering that I'm going to need to use databases. Prior to this contract I didn't even know about foxpro, and so I've had to learn foxpro on the fly, write procedures and make modifications to the database. I've actually come to like it, and this project would be rewritten in Foxpro if it were still a supported language, because over the past few months, I've come to like the features of Foxpro that make it so easy to develop data-driven applications. I once perfomed an experiment, comparing C# to Foxpro. What took me 45 minutes in C# took me two in Foxpro, and I knew C# prior to Foxpro. I was hoping to leverage the power of C#, but it intimidates me that in foxpro, you can have one line of code and be using a database. Prior to this, I have never written any serious database development from scratch. All the applications that I've written are in a different league. They are either completely data-naive or data-naive enough that I can get away with not using a database through serialization or by designing algorithms that work with the data in a manner that is stateless, so there is no need to worry about databases. I've come to realize, very quickly, that serialization and my efficacy with data structures has been my crutch all these years that's prevented me from adventuring into databases, and has consequently hindered my success in real-world programming. Sure, I've written some database stuff in Perl and Python, and I've done forms and worked with relational databases and tables, I'm a wizard in Access and Excel (seriously) and can do just about anything, but it just feels unnatural writing SQL code in another language... I don't mind writing SQL, and I don't It's that bridge between the database and the program code that drives me absolutely bonkers. I hope I'm not the only one to think this, but it bothers me that I have to create statements like the following string sSql = "SELECT * from tablename" When there's really no reason for that kind of unchecked language binding between two languages and two API's. Don't get my wrong, SQL is great, but I don't like the idea that, when executing commands on a SQL database, that one must intermix database and application software, and there's no database independence, which means that different versions of different databases can break code. This isn't very nice. The nicest thing about Foxpro is the cohesiveness between programming language and database. It's so easy, and Foxpro makes it easy, because the tool just fits the task. I can see why so many developers have created a career with this language, because it lowered the barrier of entry to data-driven applications that so many businesses need. It was wonderful. For my purposes today, with the demands and need for community support, extensibility, and language features, Foxpro isn't a solution that I feel would be the right tool for the job. I'm also worried about working too heavy with the database, because I've seen data-driven .NET applications have issues with database caches, running out of memory, and objects in the database not being collected. (Memory leaks) And OH the queries. Which one, how, and why? There are a plethora of different ways that a database can be setup, I think I counted 5 or 6 different kinds of database applications alone that I can chose from. That is a great mountain for me to climb when I don't even know where to begin when it comes to writing data-driven applications. The problem isn't that I don't know SQL or that I don't know C#. I know both and have worked with both extensively. It's making them work together that's the problem, and it's something I've never done in C# before. Reports The client likes paper. The data needs to be printed out in a format that is extensible, layered, and easy to use. I have never done reporting before, and so this is a bit of a problem. From the data source comes crystal reports, and so there's a dependency on the database, from what I understand. Code reuse A large part of the design decision that I've gone through so far is to break the task of writing a piece of this software into routines and modular DLL's and so forth such that much of the code can be reused. For example, when I setup this database, I want to be able to reuse the same database code over and over again. I also want to make sure that when the day comes that another developer is here, that he/she will be able to pick up just where I left off. The quicker I develop these applications, the better off I am. Tasks & Goals In my project, I need to write routines that apply algorithms and look for predefined patterns in financial data. Additionally, I need to simulate trading based on predefined algorithms and data. Then I need to prepare reports on that data. Additionally, I need to have a way to change the code base for this application quickly and effectively, without hacking together some band-aid solution for a problem that really needs a trauma ward. Special Considerations The solution must be fast, run quickly on existing hardware, and not be too much of a pain to maintain and write. I understand that anything I write I'm married to -- I'm responsible for the things that I write because my reputation and livelihood is dependent on it. Do I really need a database? What about performance? Performance was such a big issue that I hand wrote a data structure that is capable of performing 2 billion operations, using a total of 4 gigs of memory in under 1/4 of a second using the standard core two duo processor. I could not find a similar, pre-written data structure in C# to perform this task. What setup do I use in terms of database? What about reporting? I'd prefer to have PDF's generated, but I'd like to be able to visually sketch those reports and then just have a ReportFactory of some sort, that when I pass some variables in, it just does that data. About Me I'm a lone developer for a small business in this area. This is the first time I've done this and I've never had the breadth and depth of my knowledge tested. I'm incredibly frustrated with this project because I feel incredibly overwhelmed with the task at hand. I'm looking for that entry level point where I can draw a line and say "this is what I need to do" Conclusion I may have not been clear enough on my post. I'm still new to this whole thing, and I've been doing my best to contribute back to the community that I've leached so much knowledge from. I'd be glad to edit my post and add more information if possible. I'm looking for a big-picture solution or design process that helps me get off the ground in this world of data-driven applications, because I have a feeling that it's going to be concentric to my entire career as a programmer for some time. Specifically, if you didn't get it from the rest of the post (I may not have been clear enough) I really need some guidance as to where to go in terms of the design decisions for this project. Some things that'll be useful will be a pro/con list for the different kinds of database projects available in VS2010. I've tried, but generating that list has been as hard as solving the problem itself... If you could walk a developer writing a data-driven application for the first time in C#, how would you do that? Where would you point them to?

  Read the article

• How to get full query string parameters not UrlDecoded

  - by developerit

  Introduction While developing Developer IT’s website, we came across a problem when the user search keywords containing special character like the plus ‘+’ char. We found it while looking for C++ in our search engine. The request parameter output in ASP.NET was “c “. I found it strange that it removed the ‘++’ and replaced it with a space… Analysis After a bit of Googling and Reflection, it turns out that ASP.NET calls UrlDecode on each parameters retreived by the Request(“item”) method. The Request.Params property is affected by this two since it mashes all QueryString, Forms and other collections into a single one. Workaround Finally, I solve the puzzle usign the Request.RawUrl property and parsing it with the same RegEx I use in my url re-writter. The RawUrl not affected by anything. As its name say it, it’s raw. Published on http://www.developerit.com/

  Read the article

• SQL SERVER – 2008 – Introduction to Snapshot Database – Restore From Snapshot

  - by pinaldave

  Snapshot database is one of the most interesting concepts that I have used at some places recently. Here is a quick definition of the subject from Book On Line: A Database Snapshot is a read-only, static view of a database (the source database). Multiple snapshots can exist on a source database and can always reside on the same server instance as the database. Each database snapshot is consistent, in terms of transactions, with the source database as of the moment of the snapshot’s creation. A snapshot persists until it is explicitly dropped by the database owner. If you do not know how Snapshot database work, here is a quick note on the subject. However, please refer to the official description on Book-on-Line for accuracy. Snapshot database is a read-only database created from an original database called the “source database”. This database operates at page level. When Snapshot database is created, it is produced on sparse files; in fact, it does not occupy any space (or occupies very little space) in the Operating System. When any data page is modified in the source database, that data page is copied to Snapshot database, making the sparse file size increases. When an unmodified data page is read in the Snapshot database, it actually reads the pages of the original database. In other words, the changes that happen in the source database are reflected in the Snapshot database. Let us see a simple example of Snapshot. In the following exercise, we will do a few operations. Please note that this script is for demo purposes only- there are a few considerations of CPU, DISK I/O and memory, which will be discussed in the future posts. Create Snapshot Delete Data from Original DB Restore Data from Snapshot First, let us create the first Snapshot database and observe the sparse file details. USE master GO -- Create Regular Database CREATE DATABASE RegularDB GO USE RegularDB GO -- Populate Regular Database with Sample Table CREATE TABLE FirstTable (ID INT, Value VARCHAR(10)) INSERT INTO FirstTable VALUES(1, 'First'); INSERT INTO FirstTable VALUES(2, 'Second'); INSERT INTO FirstTable VALUES(3, 'Third'); GO -- Create Snapshot Database CREATE DATABASE SnapshotDB ON (Name ='RegularDB', FileName='c:\SSDB.ss1') AS SNAPSHOT OF RegularDB; GO -- Select from Regular and Snapshot Database SELECT * FROM RegularDB.dbo.FirstTable; SELECT * FROM SnapshotDB.dbo.FirstTable; GO Now let us see the resultset for the same. Now let us do delete something from the Original DB and check the same details we checked before. -- Delete from Regular Database DELETE FROM RegularDB.dbo.FirstTable; GO -- Select from Regular and Snapshot Database SELECT * FROM RegularDB.dbo.FirstTable; SELECT * FROM SnapshotDB.dbo.FirstTable; GO When we check the details of sparse file created by Snapshot database, we will find some interesting details. The details of Regular DB remain the same. It clearly shows that when we delete data from Regular/Source DB, it copies the data pages to Snapshot database. This is the reason why the size of the snapshot DB is increased. Now let us take this small exercise to  the next level and restore our deleted data from Snapshot DB to Original Source DB. -- Restore Data from Snapshot Database USE master GO RESTORE DATABASE RegularDB FROM DATABASE_SNAPSHOT = 'SnapshotDB'; GO -- Select from Regular and Snapshot Database SELECT * FROM RegularDB.dbo.FirstTable; SELECT * FROM SnapshotDB.dbo.FirstTable; GO -- Clean up DROP DATABASE [SnapshotDB]; DROP DATABASE [RegularDB]; GO Now let us check the details of the select statement and we can see that we are successful able to restore the database from Snapshot Database. We can clearly see that this is a very useful feature in case you would encounter a good business that needs it. I would like to request the readers to suggest more details if they are using this feature in their business. Also, let me know if you think it can be potentially used to achieve any tasks. Complete Script of the afore- mentioned operation for easy reference is as follows: USE master GO -- Create Regular Database CREATE DATABASE RegularDB GO USE RegularDB GO -- Populate Regular Database with Sample Table CREATE TABLE FirstTable (ID INT, Value VARCHAR(10)) INSERT INTO FirstTable VALUES(1, 'First'); INSERT INTO FirstTable VALUES(2, 'Second'); INSERT INTO FirstTable VALUES(3, 'Third'); GO -- Create Snapshot Database CREATE DATABASE SnapshotDB ON (Name ='RegularDB', FileName='c:\SSDB.ss1') AS SNAPSHOT OF RegularDB; GO -- Select from Regular and Snapshot Database SELECT * FROM RegularDB.dbo.FirstTable; SELECT * FROM SnapshotDB.dbo.FirstTable; GO -- Delete from Regular Database DELETE FROM RegularDB.dbo.FirstTable; GO -- Select from Regular and Snapshot Database SELECT * FROM RegularDB.dbo.FirstTable; SELECT * FROM SnapshotDB.dbo.FirstTable; GO -- Restore Data from Snapshot Database USE master GO RESTORE DATABASE RegularDB FROM DATABASE_SNAPSHOT = 'SnapshotDB'; GO -- Select from Regular and Snapshot Database SELECT * FROM RegularDB.dbo.FirstTable; SELECT * FROM SnapshotDB.dbo.FirstTable; GO -- Clean up DROP DATABASE [SnapshotDB]; DROP DATABASE [RegularDB]; GO Reference : Pinal Dave (http://blog.SQLAuthority.com) Filed under: SQL, SQL Authority, SQL Backup and Restore, SQL Data Storage, SQL Query, SQL Server, SQL Tips and Tricks, SQLServer, T SQL, Technology

  Read the article

• ???????/??????! Oracle Database 11g R2 ???????

  - by Yusuke.Yamamoto

  ????? ??:2010/11/17 ??:??????/?? 2009?9?? Oracle Database ?????Oracle Database 11g Release 2???????????1???????!??????????????????·??????????????????????????????????????????????????????????!??????????????????????????????????! Oracle Database 11g R2 ????Oracle Database 11g R2 ?????????? ????????? ????????????????? http://www.oracle.com/technology/global/jp/ondemand/otn-seminar/pdf/20101117_11gR2.pdf

  Read the article

• SQL SERVER – Log File Growing for Model Database – model Database Log File Grew Too Big

  - by pinaldave

  After reading my earlier article SQL SERVER – master Database Log File Grew Too Big, I received an email recently from another reader asking why does the log file of model database grow every day when he is not carrying out any operation in the model database. As per the email, he is absolutely sure that he is doing nothing on his model database; he had used policy management to catch any T-SQL operation in the model database and there were none. This was indeed surprising to me. I sent a request to access to his server, which he happily agreed for and within a min, we figured out the issue. He was taking the backup of the model database every day taking the database backup every night. When I explained the same to him, he did not believe it; so I quickly wrote down the following script. The results before and after the usage of the script were very clear. What is a model database? The model database is used as the template for all databases created on an instance of SQL Server. Any object you create in the model database will be automatically created in subsequent user database created on the server. NOTE: Do not run this in production environment. During the demo, the model database was in full recovery mode and only full backup operation was performed (no log backup). Before Backup Script Backup Script in loop DECLARE @FLAG INT SET @FLAG = 1 WHILE(@FLAG < 1000) BEGIN BACKUP DATABASE [model] TO  DISK = N'D:\model.bak' SET @FLAG = @FLAG + 1 END GO After Backup Script Why did this happen? The model database was in full recovery mode and taking full backup is logged operation. As there was no log backup and only full backup was performed on the model database, the size of the log file kept growing. Resolution: Change the backup mode of model database from “Full Recovery” to “Simple Recovery.”. Take full backup of the model database “only” when you change something in the model database. Let me know if you have encountered a situation like this? If so, how did you resolve it? It will be interesting to know about your experience. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, PostADay, SQL, SQL Authority, SQL Backup and Restore, SQL Query, SQL Scripts, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• Database model for keeping track of likes/shares/comments on blog posts over time

  - by gage

  My goal is to keep track of the popular posts on different blog sites based on social network activity at any given time. The goal is not to simply get the most popular now, but instead find posts that are popular compared to other posts on the same blog. For example, I follow a tech blog, a sports blog, and a gossip blog. The tech blog gets waaay more readership than the other two blogs, so in raw numbers every post on the tech blog will always out number views on the other two. So lets say the average tech blog post gets 500 facebook likes and the other two get an average of 50 likes per post. Then when there is a sports blog post that has 200 fb likes and a gossip blog post with 300 while the tech blog posts today have 500 likes I want to highlight the sports and gossip blog posts (more likes than average vs tech blog with more # of likes but just average for the blog) The approach I am thinking of taking is to make an entry in a database for each blog post. Every x minutes (say every 15 minutes) I will check how many likes/shares/comments an entry has received on all the social networks (facebook, twitter, google+, linkeIn). So over time there will be a history of likes for each blog post, i.e post 1234 after 15 min: 10 fb likes, 4 tweets, 6 g+ after 30 min: 15 fb likes, 15 tweets, 10 g+ ... ... after 48 hours: 200 fb likes, 25 tweets, 15 g+ By keeping a history like this for each blog post I can know the average number of likes/shares/tweets at any give time interval. So for example the average number of fb likes for all blog posts 48hrs after posting is 50, and a particular post has 200 I can mark that as a popular post and feature/highlight it. A consideration in the design is to be able to easily query the values (likes/shares) for a specific time-frame, i.e. fb likes after 30min or tweets after 24 hrs in-order to compute averages with which to compare against (or should averages be stored in it's own table?) If this approach is flawed or could use improvement please let me know, but it is not my main question. My main question is what should a database scheme for storing this info look like? Assuming that the above approach is taken I am trying to figure out what a database schema for storing the likes over time would look like. I am brand new to databases, in doing some basic reading I see that it is advisable to make a 3NF database. I have come up with the following possible schema. Schema 1 DB Popular Posts Table: Post post_id ( primary key(pk) ) url title Table: Social Activity activity_id (pk) url (fk) type (i.e. facebook,twitter,g+) value timestamp This was my initial instinct (base on my very limited db knowledge). As far as I under stand this schema would be 3NF? I searched for designs of similar database model, and found this question on stackoverflow, http://stackoverflow.com/questions/11216080/data-structure-for-storing-height-and-weight-etc-over-time-for-multiple-users . The scenario in that question is similar (recording weight/height of users overtime). Taking the accepted answer for that question and applying it to my model results in something like: Schema 2 (same as above, but break down the social activity into 2 tables) DB Popular Posts Table: Post post_id (pk) url title Table: Social Measurement measurement_id (pk) post_id (fk) timestamp Table: Social stat stat_id (pk) measurement_id (fk) type (i.e. facebook,twitter,g+) value The advantage I see in schema 2 is that I will likely want to access all the values for a given time, i.e. when making a measurement at 30min after a post is published I will simultaneous check number of fb likes, fb shares, fb comments, tweets, g+, linkedIn. So with this schema it may be easier get get all stats for a measurement_id corresponding to a certain time, i.e. all social stats for post 1234 at time x. Another thought I had is since it doesn't make sense to compare number of fb likes with number of tweets or g+ shares, maybe it makes sense to separate each social measurement into it's own table? Schema 3 DB Popular Posts Table: Post post_id (pk) url title Table: fb_likes fb_like_id (pk) post_id (fk) timestamp value Table: fb_shares fb_shares_id (pk) post_id (fk) timestamp value Table: tweets tweets__id (pk) post_id (fk) timestamp value Table: google_plus google_plus_id (pk) post_id (fk) timestamp value As you can see I am generally lost/unsure of what approach to take. I'm sure this typical type of database problem (storing measurements overtime, i.e temperature statistic) that must have a common solution. Is there a design pattern/model for this, does it have a name? I tried searching for "database periodic data collection" or "database measurements over time" but didn't find anything specific. What would be an appropriate model to solve the needs of this problem?

  Read the article

• SQL SERVER – T-SQL Script to Take Database Offline – Take Database Online

  - by pinaldave

  Blog reader Joyesh Mitra recently left a comment to one of my very old posts about SQL SERVER – 2005 Take Off Line or Detach Database, which I have written focusing on taking the database offline. However, I did not include how to bring the offline database to online in that post. The reason I did not write it was that I was thinking it was a very simple script that almost everyone knows. However, it seems to me that there is something I found advanced in this procedure that is not simple for other people. We all have different expertise and we all try to learn new things, so I do not see any reason as to not write about the script to take the database online. -- Create Test DB CREATE DATABASE [myDB] GO -- Take the Database Offline ALTER DATABASE [myDB] SET OFFLINE WITH ROLLBACK IMMEDIATE GO -- Take the Database Online ALTER DATABASE [myDB] SET ONLINE GO -- Clean up DROP DATABASE [myDB] GO Joyesh let me know if this answers your question. Reference : Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, Readers Question, SQL, SQL Authority, SQL Query, SQL Scripts, SQL Server, SQL Tips and Tricks, SQLServer, T SQL, Technology

  Read the article

• SQL SERVER – Shrinking Database is Bad – Increases Fragmentation – Reduces Performance

  - by pinaldave

  Earlier, I had written two articles related to Shrinking Database. I wrote about why Shrinking Database is not good. SQL SERVER – SHRINKDATABASE For Every Database in the SQL Server SQL SERVER – What the Business Says Is Not What the Business Wants I received many comments on Why Database Shrinking is bad. Today we will go over a very interesting example that I have created for the same. Here are the quick steps of the example. Create a test database Create two tables and populate with data Check the size of both the tables Size of database is very low Check the Fragmentation of one table Fragmentation will be very low Truncate another table Check the size of the table Check the fragmentation of the one table Fragmentation will be very low SHRINK Database Check the size of the table Check the fragmentation of the one table Fragmentation will be very HIGH REBUILD index on one table Check the size of the table Size of database is very HIGH Check the fragmentation of the one table Fragmentation will be very low Here is the script for the same. USE MASTER GO CREATE DATABASE ShrinkIsBed GO USE ShrinkIsBed GO -- Name of the Database and Size SELECT name, (size*8) Size_KB FROM sys.database_files GO -- Create FirstTable CREATE TABLE FirstTable (ID INT, FirstName VARCHAR(100), LastName VARCHAR(100), City VARCHAR(100)) GO -- Create Clustered Index on ID CREATE CLUSTERED INDEX [IX_FirstTable_ID] ON FirstTable ( [ID] ASC ) ON [PRIMARY] GO -- Create SecondTable CREATE TABLE SecondTable (ID INT, FirstName VARCHAR(100), LastName VARCHAR(100), City VARCHAR(100)) GO -- Create Clustered Index on ID CREATE CLUSTERED INDEX [IX_SecondTable_ID] ON SecondTable ( [ID] ASC ) ON [PRIMARY] GO -- Insert One Hundred Thousand Records INSERT INTO FirstTable (ID,FirstName,LastName,City) SELECT TOP 100000 ROW_NUMBER() OVER (ORDER BY a.name) RowID, 'Bob', CASE WHEN ROW_NUMBER() OVER (ORDER BY a.name)%2 = 1 THEN 'Smith' ELSE 'Brown' END, CASE WHEN ROW_NUMBER() OVER (ORDER BY a.name)%10 = 1 THEN 'New York' WHEN ROW_NUMBER() OVER (ORDER BY a.name)%10 = 5 THEN 'San Marino' WHEN ROW_NUMBER() OVER (ORDER BY a.name)%10 = 3 THEN 'Los Angeles' ELSE 'Houston' END FROM sys.all_objects a CROSS JOIN sys.all_objects b GO -- Name of the Database and Size SELECT name, (size*8) Size_KB FROM sys.database_files GO -- Insert One Hundred Thousand Records INSERT INTO SecondTable (ID,FirstName,LastName,City) SELECT TOP 100000 ROW_NUMBER() OVER (ORDER BY a.name) RowID, 'Bob', CASE WHEN ROW_NUMBER() OVER (ORDER BY a.name)%2 = 1 THEN 'Smith' ELSE 'Brown' END, CASE WHEN ROW_NUMBER() OVER (ORDER BY a.name)%10 = 1 THEN 'New York' WHEN ROW_NUMBER() OVER (ORDER BY a.name)%10 = 5 THEN 'San Marino' WHEN ROW_NUMBER() OVER (ORDER BY a.name)%10 = 3 THEN 'Los Angeles' ELSE 'Houston' END FROM sys.all_objects a CROSS JOIN sys.all_objects b GO -- Name of the Database and Size SELECT name, (size*8) Size_KB FROM sys.database_files GO -- Check Fragmentations in the database SELECT avg_fragmentation_in_percent, fragment_count FROM sys.dm_db_index_physical_stats (DB_ID(), OBJECT_ID('SecondTable'), NULL, NULL, 'LIMITED') GO Let us check the table size and fragmentation. Now let us TRUNCATE the table and check the size and Fragmentation. USE MASTER GO CREATE DATABASE ShrinkIsBed GO USE ShrinkIsBed GO -- Name of the Database and Size SELECT name, (size*8) Size_KB FROM sys.database_files GO -- Create FirstTable CREATE TABLE FirstTable (ID INT, FirstName VARCHAR(100), LastName VARCHAR(100), City VARCHAR(100)) GO -- Create Clustered Index on ID CREATE CLUSTERED INDEX [IX_FirstTable_ID] ON FirstTable ( [ID] ASC ) ON [PRIMARY] GO -- Create SecondTable CREATE TABLE SecondTable (ID INT, FirstName VARCHAR(100), LastName VARCHAR(100), City VARCHAR(100)) GO -- Create Clustered Index on ID CREATE CLUSTERED INDEX [IX_SecondTable_ID] ON SecondTable ( [ID] ASC ) ON [PRIMARY] GO -- Insert One Hundred Thousand Records INSERT INTO FirstTable (ID,FirstName,LastName,City) SELECT TOP 100000 ROW_NUMBER() OVER (ORDER BY a.name) RowID, 'Bob', CASE WHEN ROW_NUMBER() OVER (ORDER BY a.name)%2 = 1 THEN 'Smith' ELSE 'Brown' END, CASE WHEN ROW_NUMBER() OVER (ORDER BY a.name)%10 = 1 THEN 'New York' WHEN ROW_NUMBER() OVER (ORDER BY a.name)%10 = 5 THEN 'San Marino' WHEN ROW_NUMBER() OVER (ORDER BY a.name)%10 = 3 THEN 'Los Angeles' ELSE 'Houston' END FROM sys.all_objects a CROSS JOIN sys.all_objects b GO -- Name of the Database and Size SELECT name, (size*8) Size_KB FROM sys.database_files GO -- Insert One Hundred Thousand Records INSERT INTO SecondTable (ID,FirstName,LastName,City) SELECT TOP 100000 ROW_NUMBER() OVER (ORDER BY a.name) RowID, 'Bob', CASE WHEN ROW_NUMBER() OVER (ORDER BY a.name)%2 = 1 THEN 'Smith' ELSE 'Brown' END, CASE WHEN ROW_NUMBER() OVER (ORDER BY a.name)%10 = 1 THEN 'New York' WHEN ROW_NUMBER() OVER (ORDER BY a.name)%10 = 5 THEN 'San Marino' WHEN ROW_NUMBER() OVER (ORDER BY a.name)%10 = 3 THEN 'Los Angeles' ELSE 'Houston' END FROM sys.all_objects a CROSS JOIN sys.all_objects b GO -- Name of the Database and Size SELECT name, (size*8) Size_KB FROM sys.database_files GO -- Check Fragmentations in the database SELECT avg_fragmentation_in_percent, fragment_count FROM sys.dm_db_index_physical_stats (DB_ID(), OBJECT_ID('SecondTable'), NULL, NULL, 'LIMITED') GO You can clearly see that after TRUNCATE, the size of the database is not reduced and it is still the same as before TRUNCATE operation. After the Shrinking database operation, we were able to reduce the size of the database. If you notice the fragmentation, it is considerably high. The major problem with the Shrink operation is that it increases fragmentation of the database to very high value. Higher fragmentation reduces the performance of the database as reading from that particular table becomes very expensive. One of the ways to reduce the fragmentation is to rebuild index on the database. Let us rebuild the index and observe fragmentation and database size. -- Rebuild Index on FirstTable ALTER INDEX IX_SecondTable_ID ON SecondTable REBUILD GO -- Name of the Database and Size SELECT name, (size*8) Size_KB FROM sys.database_files GO -- Check Fragmentations in the database SELECT avg_fragmentation_in_percent, fragment_count FROM sys.dm_db_index_physical_stats (DB_ID(), OBJECT_ID('SecondTable'), NULL, NULL, 'LIMITED') GO You can notice that after rebuilding, Fragmentation reduces to a very low value (almost same to original value); however the database size increases way higher than the original. Before rebuilding, the size of the database was 5 MB, and after rebuilding, it is around 20 MB. Regular rebuilding the index is rebuild in the same user database where the index is placed. This usually increases the size of the database. Look at irony of the Shrinking database. One person shrinks the database to gain space (thinking it will help performance), which leads to increase in fragmentation (reducing performance). To reduce the fragmentation, one rebuilds index, which leads to size of the database to increase way more than the original size of the database (before shrinking). Well, by Shrinking, one did not gain what he was looking for usually. Rebuild indexing is not the best suggestion as that will create database grow again. I have always remembered the excellent post from Paul Randal regarding Shrinking the database is bad. I suggest every one to read that for accuracy and interesting conversation. Let us run following script where we Shrink the database and REORGANIZE. -- Name of the Database and Size SELECT name, (size*8) Size_KB FROM sys.database_files GO -- Check Fragmentations in the database SELECT avg_fragmentation_in_percent, fragment_count FROM sys.dm_db_index_physical_stats (DB_ID(), OBJECT_ID('SecondTable'), NULL, NULL, 'LIMITED') GO -- Shrink the Database DBCC SHRINKDATABASE (ShrinkIsBed); GO -- Name of the Database and Size SELECT name, (size*8) Size_KB FROM sys.database_files GO -- Check Fragmentations in the database SELECT avg_fragmentation_in_percent, fragment_count FROM sys.dm_db_index_physical_stats (DB_ID(), OBJECT_ID('SecondTable'), NULL, NULL, 'LIMITED') GO -- Rebuild Index on FirstTable ALTER INDEX IX_SecondTable_ID ON SecondTable REORGANIZE GO -- Name of the Database and Size SELECT name, (size*8) Size_KB FROM sys.database_files GO -- Check Fragmentations in the database SELECT avg_fragmentation_in_percent, fragment_count FROM sys.dm_db_index_physical_stats (DB_ID(), OBJECT_ID('SecondTable'), NULL, NULL, 'LIMITED') GO You can see that REORGANIZE does not increase the size of the database or remove the fragmentation. Again, I no way suggest that REORGANIZE is the solution over here. This is purely observation using demo. Read the blog post of Paul Randal. Following script will clean up the database -- Clean up USE MASTER GO ALTER DATABASE ShrinkIsBed SET SINGLE_USER WITH ROLLBACK IMMEDIATE GO DROP DATABASE ShrinkIsBed GO There are few valid cases of the Shrinking database as well, but that is not covered in this blog post. We will cover that area some other time in future. Additionally, one can rebuild index in the tempdb as well, and we will also talk about the same in future. Brent has written a good summary blog post as well. Are you Shrinking your database? Well, when are you going to stop Shrinking it? Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, PostADay, SQL, SQL Authority, SQL Index, SQL Performance, SQL Query, SQL Scripts, SQL Server, SQL Tips and Tricks, SQLServer, T SQL, Technology

  Read the article

• Examples of temporal database designs? [closed]

  - by miku

  I'm researching various database design for historical record keeping - because I would like to implement a prototypical web application that (excessively) tracks changes made by users and let them undo things, see revisions, etc. I'd love use mercurial or git as backend (with files as records) - since they already implement the kind of append-only changes I imagine. I tried git and dulwich (python git API) - and it went ok - but I was concerned about performance; Bi-temporal database design lets you store a row along with time periods, when this record was valid. This sure sound more performant than to operate on files on disk (as in 1.) - but I had little luck finding real-world examples (e.g. from open source projects), that use this kind of design and are approachable enough to learn from them. Revisions à la MediaWiki revisions or an extra table for versions, as in Redmine. The problem here is, that DELETE would take the whole history with it. I looked at NoSQL solutions, too. With a document oriented approach, it would be simple to just store the whole history of an entity within the document itself - which would reduce design plus implementation time in contrast to a RDBMS approach. However, in this case I'm a bit concerned about ACID-properties, which would be important in the application. I'd like ask about experiences about real-world and pragmatic designs for temporal data.

  Read the article

• SQL SERVER – Import CSV into Database – Transferring File Content into a Database Table using CSVexpress

  - by pinaldave

  One of the most common data integration tasks I run into is a desire to move data from a file into a database table.  Generally the user is familiar with his data, the structure of the file, and the database table, but is unfamiliar with data integration tools and therefore views this task as something that is difficult.  What these users really need is a point and click approach that minimizes the learning curve for the data integration tool.  This is what CSVexpress (www.CSVexpress.com) is all about!  It is based on expressor Studio, a data integration tool I’ve been reviewing over the last several months. With CSVexpress, moving data between data sources can be as simple as providing the database connection details, describing the structure of the incoming and outgoing data and then connecting two pre-programmed operators.   There’s no need to learn the intricacies of the data integration tool or to write code.  Let’s look at an example. Suppose I have a comma separated value data file with data similar to the following, which is a listing of terminated employees that includes their hiring and termination date, department, job description, and final salary. EMP_ID,STRT_DATE,END_DATE,JOB_ID,DEPT_ID,SALARY 102,13-JAN-93,24-JUL-98 17:00,Programmer,60,"$85,000" 101,21-SEP-89,27-OCT-93 17:00,Account Representative,110,"$65,000" 103,28-OCT-93,15-MAR-97 17:00,Account Manager,110,"$75,000" 304,17-FEB-96,19-DEC-99 17:00,Marketing,20,"$45,000" 333,24-MAR-98,31-DEC-99 17:00,Data Entry Clerk,50,"$35,000" 100,17-SEP-87,17-JUN-93 17:00,Administrative Assistant,90,"$40,000" 334,24-MAR-98,31-DEC-98 17:00,Sales Representative,80,"$40,000" 400,01-JAN-99,31-DEC-99 17:00,Sales Manager,80,"$55,000" Notice the concise format used for the date values, the fact that the termination date includes both date and time information, and that the salary is clearly identified as money by the dollar sign and digit grouping.  In moving this data to a database table I want to express the dates using a format that includes the century since it’s obvious that this listing could include employees who left the company in both the 20th and 21st centuries, and I want the salary to be stored as a decimal value without the currency symbol and grouping character.  Most data integration tools would require coding within a transformation operation to effect these changes, but not expressor Studio.  Directives for these modifications are included in the description of the incoming data. Besides starting the expressor Studio tool and opening a project, the first step is to create connection artifacts, which describe to expressor where data is stored.  For this example, two connection artifacts are required: a file connection, which encapsulates the file system location of my file; and a database connection, which encapsulates the database connection information.  With expressor Studio, I use wizards to create these artifacts. First click New Connection > File Connection in the Home tab of expressor Studio’s ribbon bar, which starts the File Connection wizard.  In the first window, I enter the path to the directory that contains the input file.  Note that the file connection artifact only specifies the file system location, not the name of the file. Then I click Next and enter a meaningful name for this connection artifact; clicking Finish closes the wizard and saves the artifact. To create the Database Connection artifact, I must know the location of, or instance name, of the target database and have the credentials of an account with sufficient privileges to write to the target table.  To use expressor Studio’s features to the fullest, this account should also have the authority to create a table. I click the New Connection > Database Connection in the Home tab of expressor Studio’s ribbon bar, which starts the Database Connection wizard.  expressor Studio includes high-performance drivers for many relational database management systems, so I can simply make a selection from the “Supplied database drivers” drop down control.  If my desired RDBMS isn’t listed, I can optionally use an existing ODBC DSN by selecting the “Existing DSN” radio button. In the following window, I enter the connection details.  With Microsoft SQL Server, I may choose to use Windows Authentication rather than rather than account credentials.  After clicking Next, I enter a meaningful name for this connection artifact and clicking Finish closes the wizard and saves the artifact. Now I create a schema artifact, which describes the structure of the file data.  When expressor reads a file, all data fields are typed as strings.  In some use cases this may be exactly what is needed and there is no need to edit the schema artifact.  But in this example, editing the schema artifact will be used to specify how the data should be transformed; that is, reformat the dates to include century designations, change the employee and job ID’s to integers, and convert the salary to a decimal value. Again a wizard is used to create the schema artifact.  I click New Schema > Delimited Schema in the Home tab of expressor Studio’s ribbon bar, which starts the Database Connection wizard.  In the first window, I click Get Data from File, which then displays a listing of the file connections in the project.  When I click on the file connection I previously created, a browse window opens to this file system location; I then select the file and click Open, which imports 10 lines from the file into the wizard. I now view the file’s content and confirm that the appropriate delimiter characters are selected in the “Field Delimiter” and “Record Delimiter” drop down controls; then I click Next. Since the input file includes a header row, I can easily indicate that fields in the file should be identified through the corresponding header value by clicking “Set All Names from Selected Row. “ Alternatively, I could enter a different identifier into the Field Details > Name text box.  I click Next and enter a meaningful name for this schema artifact; clicking Finish closes the wizard and saves the artifact. Now I open the schema artifact in the schema editor.  When I first view the schema’s content, I note that the types of all attributes in the Semantic Type (the right-hand panel) are strings and that the attribute names are the same as the field names in the data file.  To change an attribute’s name and type, I highlight the attribute and click Edit in the Attributes grouping on the Schema > Edit tab of the editor’s ribbon bar.  This opens the Edit Attribute window; I can change the attribute name and select the desired type from the “Data type” drop down control.  In this example, I change the name of each attribute to the name of the corresponding database table column (EmployeeID, StartingDate, TerminationDate, JobDescription, DepartmentID, and FinalSalary).  Then for the EmployeeID and DepartmentID attributes, I select Integer as the data type, for the StartingDate and TerminationDate attributes, I select Datetime as the data type, and for the FinalSalary attribute, I select the Decimal type. But I can do much more in the schema editor.  For the datetime attributes, I can set a constraint that ensures that the data adheres to some predetermined specifications; a starting date must be later than January 1, 1980 (the date on which the company began operations) and a termination date must be earlier than 11:59 PM on December 31, 1999.  I simply select the appropriate constraint and enter the value (1980-01-01 00:00 as the starting date and 1999-12-31 11:59 as the termination date). As a last step in setting up these datetime conversions, I edit the mapping, describing the format of each datetime type in the source file. I highlight the mapping line for the StartingDate attribute and click Edit Mapping in the Mappings grouping on the Schema > Edit tab of the editor’s ribbon bar.  This opens the Edit Mapping window in which I either enter, or select, a format that describes how the datetime values are represented in the file.  Note the use of Y01 as the syntax for the year.  This syntax is the indicator to expressor Studio to derive the century by setting any year later than 01 to the 20th century and any year before 01 to the 21st century.  As each datetime value is read from the file, the year values are transformed into century and year values. For the TerminationDate attribute, my format also indicates that the datetime value includes hours and minutes. And now to the Salary attribute. I open its mapping and in the Edit Mapping window select the Currency tab and the “Use currency” check box.  This indicates that the file data will include the dollar sign (or in Europe the Pound or Euro sign), which should be removed. And on the Grouping tab, I select the “Use grouping” checkbox and enter 3 into the “Group size” text box, a comma into the “Grouping character” text box, and a decimal point into the “Decimal separator” character text box. These entries allow the string to be properly converted into a decimal value. By making these entries into the schema that describes my input file, I’ve specified how I want the data transformed prior to writing to the database table and completely removed the requirement for coding within the data integration application itself. Assembling the data integration application is simple.  Onto the canvas I drag the Read File and Write Table operators, connecting the output of the Read File operator to the input of the Write Table operator. Next, I select the Read File operator and its Properties panel opens on the right-hand side of expressor Studio.  For each property, I can select an appropriate entry from the corresponding drop down control.  Clicking on the button to the right of the “File name” text box opens the file system location specified in the file connection artifact, allowing me to select the appropriate input file.  I indicate also that the first row in the file, the header row, should be skipped, and that any record that fails one of the datetime constraints should be skipped. I then select the Write Table operator and in its Properties panel specify the database connection, normal for the “Mode,” and the “Truncate” and “Create Missing Table” options.  If my target table does not yet exist, expressor will create the table using the information encapsulated in the schema artifact assigned to the operator. The last task needed to complete the application is to create the schema artifact used by the Write Table operator.  This is extremely easy as another wizard is capable of using the schema artifact assigned to the Read Table operator to create a schema artifact for the Write Table operator.  In the Write Table Properties panel, I click the drop down control to the right of the “Schema” property and select “New Table Schema from Upstream Output…” from the drop down menu. The wizard first displays the table description and in its second screen asks me to select the database connection artifact that specifies the RDBMS in which the target table will exist.  The wizard then connects to the RDBMS and retrieves a list of database schemas from which I make a selection.  The fourth screen gives me the opportunity to fine tune the table’s description.  In this example, I set the width of the JobDescription column to a maximum of 40 characters and select money as the type of the LastSalary column.  I also provide the name for the table. This completes development of the application.  The entire application was created through the use of wizards and the required data transformations specified through simple constraints and specifications rather than through coding.  To develop this application, I only needed a basic understanding of expressor Studio, a level of expertise that can be gained by working through a few introductory tutorials.  expressor Studio is as close to a point and click data integration tool as one could want and I urge you to try this product if you have a need to move data between files or from files to database tables. Check out CSVexpress in more detail.  It offers a few basic video tutorials and a preview of expressor Studio 3.5, which will support the reading and writing of data into Salesforce.com. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, PostADay, SQL, SQL Authority, SQL Documentation, SQL Download, SQL Query, SQL Server, SQL Tips and Tricks, SQLServer, T SQL, Technology

  Read the article

• How to design database for tests in online test application

  - by Kien Thanh

  I'm building an online test application, the purpose of app is, it can allow teacher create courses, topics of course, and questions (every question has mark), and they can create tests for students and students can do tests online. To create tests of any courses for students, first teacher need to create a test pattern for that course, test pattern actually is a general test includes the number of questions teacher want it has, then from that test pattern, teacher will generate number of tests corresponding with number of students will take tests of that course, and every test for student will has different number of questions, although the max mark of test in every test are the same. Example if teacher generate tests for two students, the max mark of test will be 20, like this: Student A take test with 20 questions, student B take test only has 10 questions, it means maybe every question in test of student A only has mark is 1, but questions in student B has mark is 2. So 20 = 10 x 2, sorry for my bad English but I don't know how to explain it better. I have designed tables for: - User (include students and teachers account) - Course - Topic - Question - Answer But I don't know how to define associations between user and test pattern, test, question. Currently I only can think these: Test pattern table: name, description, dateStart, dateFinish, numberOfMinutes, maxMarkOfTest Test table: test_pattern_id And when user (is Student) take tests, I think i will have one more table: Result: user_id, test_id, mark but I can't set up associations among test pattern and test and question. How to define associations?

  Read the article

• SQL SERVER – DBA or DBD? – Database Administrator or Database Developer

  - by pinaldave

  Earlier this month, I had poll on this blog where I asked question – Are you a Database Administrator or Database Developer? The word DBA (Database Administrator) is very common but DBD (Database Developer) is not common at all. This made me think – what is the ratio of the same. Here the result of the poll: Database Administrator 36.6% (254 votes) Database Developer 63.4% (440 votes) Total Votes: 694 This is open poll, if you want you can still participate here. Vote your Voice – DBD or DBA? I think it is the time when DBD word for Database Developer gets place in our dictionary. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Database, DBA, Pinal Dave, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQLServer, T SQL, Technology

  Read the article

• Database – Beginning with Cloud Database As A Service

  - by Pinal Dave

  I love my weekend projects. Everybody does different activities in their weekend – like traveling, reading or just nothing. Every weekend I try to do something creative and different in the database world. The goal is I learn something new and if I enjoy my learning experience I share with the world. This weekend, I decided to explore Cloud Database As A Service – Morpheus. In my career I have managed many databases in the cloud and I have good experience in managing them. I should highlight that today’s applications use multiple databases from SQL for transactions and analytics, NoSQL for documents, In-Memory for caching to Indexing for search.  Provisioning and deploying these databases often require extensive expertise and time.  Often these databases are also not deployed on the same infrastructure and can create unnecessary latency between the application layer and the databases.  Not to mention the different quality of service based on the infrastructure and the service provider where they are deployed. Moreover, there are additional problems that I have experienced with traditional database setup when hosted in the cloud: Database provisioning & orchestration Slow speed due to hardware issues Poor Monitoring Tools High network latency Now if you have a great software and expert network engineer, you can continuously work on above problems and overcome them. However, not every organization have the luxury to have top notch experts in the field. Now above issues are related to infrastructure, but there are a few more problems which are related to software/application as well. Here are the top three things which can be problems if you do not have application expert: Replication and Clustering Simple provisioning of the hard drive space Automatic Sharding Well, Morpheus looks like a product build by experts who have faced similar situation in the past. The product pretty much addresses all the pain points of developers and database administrators. What is different about Morpheus is that it offers a variety of databases from MySQL, MongoDB, ElasticSearch to Reddis as a service.  Thus users can pick and chose any combination of these databases.  All of them can be provisioned in a matter of minutes with a simple and intuitive point and click user interface.  The Morpheus cloud is built on Solid State Drives (SSD) and is designed for high-speed database transactions.  In addition it offers a direct link to Amazon Web Services to minimize latency between the application layer and the databases. Here are the few steps on how one can get started with Morpheus. Follow along with me.  First go to http://www.gomorpheus.com and register for a new and free account. Step 1: Signup It is very simple to signup for Morpheus. Step 2: Select your database   I use MySQL for my daily routine, so I have selected MySQL. Upon clicking on the big red button to add Instance, it prompted a dialogue of creating a new instance.   Step 3: Create User Now we just have to create a user in our portal which we will use to connect to a database hosted at Morpheus. Click on your database instance and it will bring you to User Screen. Over here you will notice once again a big red button to create a new user. I created a user with my first name.   Step 4: Configure your MySQL client I used MySQL workbench and connected to MySQL instance, which I had created with an IP address and user.   That’s it! You are connecting to MySQL instance. Now you can create your objects just like you would create on your local box. You will have all the features of the Morpheus when you are working with your database. Dashboard While working with Morpheus, I was most impressed with its dashboard. In future blog posts, I will write more about this feature.  Also with Morpheus you use the same process for provisioning and connecting with other databases: MongoDB, ElasticSearch and Reddis. Reference: Pinal Dave (http://blog.sqlauthority.com)Filed under: MySQL, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL

  Read the article

• SQL SERVER – Spatial Database Queries – What About BLOB – T-SQL Tuesday #006

  - by pinaldave

  Michael Coles is one of the most interesting book authors I have ever met. He has a flair of writing complex stuff in a simple language. There are a very few people like that.  I really enjoyed reading his recent book, Expert SQL Server 2008 Encryption. I strongly suggest taking a look at it. This blog is written in response to T-SQL Tuesday #006: “What About BLOB? by Michael Coles. Spatial Database is my favorite subject. Since I did my TechEd India 2010 presentation, I have enjoyed this subject a lot. Before I continue this blog post, there are a few other blog posts, so I suggest you read them.  To help build the environment run the queries, I am going to present them in this single blog post. SQL SERVER – What is Spatial Database? – Developing with SQL Server Spatial and Deep Dive into Spatial Indexing This blog post explains the basics of Spatial Database and also provides a good introduction to Indexing concept. SQL SERVER – World Shapefile Download and Upload to Database – Spatial Database This blog post will enable you with how to load the shape file into database. SQL SERVER – Spatial Database Definition and Research Documents This blog post links to the white paper about Spatial Database written by Microsoft experts. SQL SERVER – Introduction to Spatial Coordinate Systems: Flat Maps for a Round Planet This blog post links to the white paper explaining coordinate system, as written by Microsoft experts. After reading the above listed blog posts, I am very confident that you are ready to run the following script. Once you create a database using the World Shapefile, as mentioned in the second link above,you can display the image of India just like the following. Please note that this is not an accurate political map. The boundary of this map has many errors and it is just a representation. You can run the following query to generate the map of India from the database spatial which you have created after following the instructions here. USE Spatial GO -- India Map SELECT [CountryName] ,[BorderAsGeometry] ,[Border] FROM [Spatial].[dbo].[Countries] WHERE Countryname = 'India' GO Now, let us find the longitude and latitude of the two major IT cities of India, Hyderabad and Bangalore. I find their values as the following: the values of longitude-latitude for Bangalore is 77.5833300000 13.0000000000; for Hyderabad, longitude-latitude is 78.4675900000 17.4531200000. Now, let us try to put these values on the India Map and see their location. -- Bangalore DECLARE @GeoLocation GEOGRAPHY SET @GeoLocation = GEOGRAPHY::STPointFromText('POINT(77.5833300000 13.0000000000)',4326).STBuffer(20000); -- Hyderabad DECLARE @GeoLocation1 GEOGRAPHY SET @GeoLocation1 = GEOGRAPHY::STPointFromText('POINT(78.4675900000 17.4531200000)',4326).STBuffer(20000); -- Bangalore and Hyderabad on Map of India SELECT name, [GeoLocation] FROM [IndiaGeoNames] I WHERE I.[GeoLocation].STDistance(@GeoLocation) <= 0 UNION ALL SELECT name, [GeoLocation] FROM [IndiaGeoNames] I WHERE I.[GeoLocation].STDistance(@GeoLocation1) <= 0 UNION ALL SELECT '',[Border] FROM [Spatial].[dbo].[Countries] WHERE Countryname = 'India' GO Now let us quickly draw a straight line between them. DECLARE @GeoLocation GEOGRAPHY SET @GeoLocation = GEOGRAPHY::STPointFromText('POINT(78.4675900000 17.4531200000)',4326).STBuffer(10000); DECLARE @GeoLocation1 GEOGRAPHY SET @GeoLocation1 = GEOGRAPHY::STPointFromText('POINT(77.5833300000 13.0000000000)',4326).STBuffer(10000); DECLARE @GeoLocation2 GEOGRAPHY SET @GeoLocation2 = GEOGRAPHY::STGeomFromText('LINESTRING(78.4675900000 17.4531200000, 77.5833300000 13.0000000000)',4326) SELECT name, [GeoLocation] FROM [IndiaGeoNames] I WHERE I.[GeoLocation].STDistance(@GeoLocation) <= 0 UNION ALL SELECT name, [GeoLocation] FROM [IndiaGeoNames] I1 WHERE I1.[GeoLocation].STDistance(@GeoLocation1) <= 0 UNION ALL SELECT '' name, @GeoLocation2 UNION ALL SELECT '',[Border] FROM [Spatial].[dbo].[Countries] WHERE Countryname = 'India' GO Let us use the distance function of the spatial database and find the straight line distance between this two cities. -- Distance Between Hyderabad and Bangalore DECLARE @GeoLocation GEOGRAPHY SET @GeoLocation = GEOGRAPHY::STPointFromText('POINT(78.4675900000 17.4531200000)',4326) DECLARE @GeoLocation1 GEOGRAPHY SET @GeoLocation1 = GEOGRAPHY::STPointFromText('POINT(77.5833300000 13.0000000000)',4326) SELECT @GeoLocation.STDistance(@GeoLocation1)/1000 'KM'; GO The result of above query is as displayed in following image. As per SQL Server, the distance between these two cities is 501 KM, but according to what I know, the distance between those two cities is around 562 KM by road. However, please note that roads are not straight and they have lots of turns, whereas this is a straight-line distance. What would be more accurate is the distance between these two cities by air travel. When we look at the air travel distance between Bangalore and Hyderabad, the total distance covered is 495 KM, which is very close to what SQL Server has estimated, which is 501 KM. Bravo! SQL Server has accurately provided the distance between two of the cities. SQL Server Spatial Database can be very useful simply because it is very easy to use, as demonstrated above. I appreciate your comments, so let me know what your thoughts and opinions about this are. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, SQL, SQL Authority, SQL Query, SQL Scripts, SQL Server, SQL Tips and Tricks, T SQL, Technology Tagged: Spatial Database

  Read the article

• SQL SERVER – How to Recover SQL Database Data Deleted by Accident

  - by Pinal Dave

  In Repair a SQL Server database using a transaction log explorer, I showed how to use ApexSQL Log, a SQL Server transaction log viewer, to recover a SQL Server database after a disaster. In this blog, I’ll show you how to use another SQL Server disaster recovery tool from ApexSQL in a situation when data is accidentally deleted. You can download ApexSQL Recover here, install, and play along. With a good SQL Server disaster recovery strategy, data recovery is not a problem. You have a reliable full database backup with valid data, a full database backup and subsequent differential database backups, or a full database backup and a chain of transaction log backups. But not all situations are ideal. Here we’ll address some sub-optimal scenarios, where you can still successfully recover data. If you have only a full database backup This is the least optimal SQL Server disaster recovery strategy, as it doesn’t ensure minimal data loss. For example, data was deleted on Wednesday. Your last full database backup was created on Sunday, three days before the records were deleted. By using the full database backup created on Sunday, you will be able to recover SQL database records that existed in the table on Sunday. If there were any records inserted into the table on Monday or Tuesday, they will be lost forever. The same goes for records modified in this period. This method will not bring back modified records, only the old records that existed on Sunday. If you restore this full database backup, all your changes (intentional and accidental) will be lost and the database will be reverted to the state it had on Sunday. What you have to do is compare the records that were in the table on Sunday to the records on Wednesday, create a synchronization script, and execute it against the Wednesday database. If you have a full database backup followed by differential database backups Let’s say the situation is the same as in the example above, only you create a differential database backup every night. Use the full database backup created on Sunday, and the last differential database backup (created on Tuesday). In this scenario, you will lose only the data inserted and updated after the differential backup created on Tuesday. If you have a full database backup and a chain of transaction log backups This is the SQL Server disaster recovery strategy that provides minimal data loss. With a full chain of transaction logs, you can recover the SQL database to an exact point in time. To provide optimal results, you have to know exactly when the records were deleted, because restoring to a later point will not bring back the records. This method requires restoring the full database backup first. If you have any differential log backup created after the last full database backup, restore the most recent one. Then, restore transaction log backups, one by one, it the order they were created starting with the first created after the restored differential database backup. Now, the table will be in the state before the records were deleted. You have to identify the deleted records, script them and run the script against the original database. Although this method is reliable, it is time-consuming and requires a lot of space on disk. How to easily recover deleted records? The following solution enables you to recover SQL database records even if you have no full or differential database backups and no transaction log backups. To understand how ApexSQL Recover works, I’ll explain what happens when table data is deleted. Table data is stored in data pages. When you delete table records, they are not immediately deleted from the data pages, but marked to be overwritten by new records. Such records are not shown as existing anymore, but ApexSQL Recover can read them and create undo script for them. How long will deleted records stay in the MDF file? It depends on many factors, as time passes it’s less likely that the records will not be overwritten. The more transactions occur after the deletion, the more chances the records will be overwritten and permanently lost. Therefore, it’s recommended to create a copy of the database MDF and LDF files immediately (if you cannot take your database offline until the issue is solved) and run ApexSQL Recover on them. Note that a full database backup will not help here, as the records marked for overwriting are not included in the backup. First, I’ll delete some records from the Person.EmailAddress table in the AdventureWorks database.   I can delete these records in SQL Server Management Studio, or execute a script such as DELETE FROM Person.EmailAddress WHERE BusinessEntityID BETWEEN 70 AND 80 Then, I’ll start ApexSQL Recover and select From DELETE operation in the Recovery tab.   In the Select the database to recover step, first select the SQL Server instance. If it’s not shown in the drop-down list, click the Server icon right to the Server drop-down list and browse for the SQL Server instance, or type the instance name manually. Specify the authentication type and select the database in the Database drop-down list.   In the next step, you’re prompted to add additional data sources. As this can be a tricky step, especially for new users, ApexSQL Recover offers help via the Help me decide option.   The Help me decide option guides you through a series of questions about the database transaction log and advises what files to add. If you know that you have no transaction log backups or detached transaction logs, or the online transaction log file has been truncated after the data was deleted, select No additional transaction logs are available. If you know that you have transaction log backups that contain the delete transactions you want to recover, click Add transaction logs. The online transaction log is listed and selected automatically.   Click Add if to add transaction log backups. It would be best if you have a full transaction log chain, as explained above. The next step for this option is to specify the time range.   Selecting a small time range for the time of deletion will create the recovery script just for the accidentally deleted records. A wide time range might script the records deleted on purpose, and you don’t want that. If needed, you can check the script generated and manually remove such records. After that, for all data sources options, the next step is to select the tables. Be careful here, if you deleted some data from other tables on purpose, and don’t want to recover them, don’t select all tables, as ApexSQL Recover will create the INSERT script for them too.   The next step offers two options: to create a recovery script that will insert the deleted records back into the Person.EmailAddress table, or to create a new database, create the Person.EmailAddress table in it, and insert the deleted records. I’ll select the first one.   The recovery process is completed and 11 records are found and scripted, as expected.   To see the script, click View script. ApexSQL Recover has its own script editor, where you can review, modify, and execute the recovery script. The insert into statements look like: INSERT INTO Person.EmailAddress( BusinessEntityID, EmailAddressID, EmailAddress, rowguid, ModifiedDate) VALUES( 70, 70, N'[email protected]' COLLATE SQL_Latin1_General_CP1_CI_AS, 'd62c5b4e-c91f-403f-b630-7b7e0fda70ce', '20030109 00:00:00.000' ); To execute the script, click Execute in the menu.   If you want to check whether the records are really back, execute SELECT * FROM Person.EmailAddress WHERE BusinessEntityID BETWEEN 70 AND 80 As shown, ApexSQL Recover recovers SQL database data after accidental deletes even without the database backup that contains the deleted data and relevant transaction log backups. ApexSQL Recover reads the deleted data from the database data file, so this method can be used even for databases in the Simple recovery model. Besides recovering SQL database records from a DELETE statement, ApexSQL Recover can help when the records are lost due to a DROP TABLE, or TRUNCATE statement, as well as repair a corrupted MDF file that cannot be attached to as SQL Server instance. You can find more information about how to recover SQL database lost data and repair a SQL Server database on ApexSQL Solution center. There are solutions for various situations when data needs to be recovered. Reference: Pinal Dave (http://blog.sqlauthority.com)Filed under: PostADay, SQL, SQL Authority, SQL Backup and Restore, SQL Query, SQL Server, SQL Tips and Tricks, T SQL

  Read the article

• (Database Design - products attributes): What is better option for product attribute database design

  - by meyosef

  Hi, I new in database design. What is better option for product attribute database design for cms?(Please suggest other options also). option 1: 1 table products{ id product_name color price attribute_name1 attribute_value1 attribute_name2 attribute_value2 attribute_name3 attribute_value3 } option 2: 3 tables products{ id product_name color price } attribute{ id name value } products_attribute{ products_id attribute_id } Thanks, Yosef

  Read the article

• SQL SERVER – List of All the Samples Database Available to Download for FREE

  - by Pinal Dave

  It is pretty much very common to have a sample database for any database product. Different companies keep on improving their product and keep on coming up with innovation in their product. To demonstrate the capability of their new enhancements they need the sample database. Microsoft have various sample database available for free download for their SQL Server Product. I have collected them here in a single blog post. Download an AdventureWorks Database The AdventureWorks OLTP database supports standard online transaction processing scenarios for a fictitious bicycle manufacturer (Adventure Works Cycles). Scenarios include Manufacturing, Sales, Purchasing, Product Management, Contact Management, and Human Resources. Coconut Dal Coconut Dal is a lightweight data access layer, for use in projects where the Entity Framework cannot be used or Microsoft’s Enterprise Library Data Block is unsuitable. Anyone who is handwriting ADO.NET should use a library instead and Coconut Dal might be the answer.  DataBooster – Extension to ADO.NET Data Provider The dbParallel DataBooster library is a high-performance extension to ADO.NET Data Provider, includes two aspects: 1) A slimmed down API encapsulation which simplified the most common data access operations (DbConnection -> DbCommand -> DbParameter -> DbDataReader) into a single class DbAccess, to help application with a clean DAL, avoid over-packing and redundant-copy of data transfer. 2) A booster for writing mass data onto database. Base on a rational utilization of database concurrency and a effective utilization of network bandwidth. Tabular AMO 2012 The sample is made of two project parts. The first part is a library of functions to manage tabular models -AMO2Tabular V2-. The second part is a sample to build a tabular model -AdventureWorks Tabular AMO 2012- using the AMO2Tabular library; the created model is similar to the ‘AdventureWorks Tabular Model 2012. SQL Server Analysis Services Product Samples SQL Server Analysis Services provides, a unified and integrated view of all your business data as the foundation for all of your traditional reporting, online analytical processing (OLAP) analysis, Key Performance Indicator (KPI) scorecards, and data mining. Analysis Services Samples for SQL Server 2008 R2 This release is dedicated to the samples that ship for Microsoft SQL Server 2008R2. For many of these samples you will also need to download the AdventureWorks family of databases. SQL Server Reporting Services Product Samples This project contains Reporting Services samples released with Microsoft SQL Server product. These samples are in the following five categories: Application Samples, Extension Samples, Model Samples, Report Samples, and Script Samples. If you are interested in contributing Reporting Services samples, please let us know by posting in the developers’ forum. Reporting Services Samples for SQL Server 2008 R2 This release is dedicated to the samples that ship for Microsoft SQL Server 2008 R2 PCU1. For many of these samples you will also need to download the AdventureWorks family of databases. SQL Server Integration Services Product Samples This project contains Integration Services samples released with Microsoft SQL Server product. These samples are in the following two categories: Package Samples and Programming Samples. If you are interested in contributing Integration Services samples, please let us know by posting in the developers’ forum. Integration Services Samples for SQL Server 2008 R2 This release is dedicated to the samples that ship for Microsoft SQL Server 2008R2. For many of these samples you will also need to download the AdventureWorks family of databases. Windows Azure SQL Reporting Admin Sample The SQLReportingAdmin sample for Windows Azure SQL Reporting demonstrates the usage of SQL Reporting APIs, and manages (add/update/delete) permissions of SQL Reporting users. Windows Azure SQL Reporting ReportViewer-SOAP API usage sample These sample projects demonstrate how to embed a Microsoft ReportViewer control that points to reports hosted on SQL Reporting report servers and how to use SQL Reporting SOAP APIs in your Windows Azure Web application. Enterprise Library 5.0 – Integration Pack for Windows Azure This NuGet package contains a zip file with the source code for the Enterprise Library Integration Pack for Windows Azure.  Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Download, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology Tagged: SQL Sample Database

  Read the article

• Database Vault 11gR2 11.2.0.1 Certified with Oracle E-Business Suite

  - by Steven Chan

  Oracle Database Vault allows security administrators to protect a database from privileged account access to application data.  Database objects can be placed in protected realms, which can be accessed only if a specific set of conditions are met.  Oracle Database Vault 11gR2 11.2.0.1 is now certified with Oracle E-Business Suite Release 11i and 12.You can now enable Database Vault 11gR2 on your existing E-Business Suite 11.2.0.1 Database instance.  If you already have DB Vault 10gR2 or 11gR1 enabled in your E-Business Suite environment, you can now upgrade to the 11gR2 Database.  We also support EBS patching with Database Vault 11.2.0.1 enabled. Our DB Vault realm creation and grants-related scripts have been updated to reduce patching downtimes.

  Read the article

• Help With Database Layout

  - by three3

  Hello everyone, I am working on a site similar to Craigslist where users can make postings and sell items in different cities. One difference between my site and Craigslist will be you will be able to search by zip code instead of having all of the cities listed on the page. I already have the ZIP Code database that has all of the city, state, latitude, longitude, and zip code info for each city. Okay, so to dive into what I need done and what I need help with: 1.) Although I have the ZIP Code database, it is not setup perfectly for my use. (I downloaded it off of the internet for free from http://zips.sourceforge.net/) 2.) I need help setting up my database structure (Ex: How many different tables should I use and how should I link them) I will be using PHP and MySQL. These our my thoughts so far on how the database can be setup: (I am not sure if this will work though.) Scenario: Someone goes to the homepage and it will tell them, "Please enter your ZIP Code.". If they enter "17241" for example, this ZIP Code is for a city named Newville located in Pennsylvania. The query would look like this with the current database setup: SELECT city FROM zip_codes WHERE zip = 17241; The result of the query would be "Newville". The problem I see here now is when they want to post something in the Newville section of the site, I will have to have an entire table setup just for the Newville city postings. There are over 42,000 cities which means I would have to have over 42,000 tables (one for each city) so that would be insane to have to do it that way. One way I was thinking of doing it was to add a column to the ZIP Code database called "city_id" which would be a unique number assigned to each city. So for example, the city Newville would have a city_id of 83. So now if someone comes and post a listing in the city Newville I would only need one other table. That one other table would be setup like this: CREATE TABLE postings ( posting_id INT NOT NULL AUTO_INCREMENT, for_sale LONGTEXT NULL, for_sale_date DATETIME NULL, for_sale_city_id INT NULL, jobs LONGTEXT NULL, jobs_date DATETIME NULL, jobs_city_id INT NULL, PRIMARY KEY(posting_id) ); (The for_sale and job_ column names are categories of the types of postings users will be able to list under. There will be many more categories than just those two but this is just for example.) So now when when someone comes to the website and they are looking for something to buy and not sell, they can enter their ZIP Code, 17241, for example, and this is the query that will run: SELECT city, city_id FROM zip_codes WHERE zip = 17241; //Result: Newville 83 (Please note that I will be using PHP to store the ZIP Code the user enters in SESSIONS and Cookies to remember them throughout the site) Now it will tell them, "Please choose your category.". If they choose the category "Items For Sale" then this is the query to run and sort the results: SELECT posting_id, for_sale, for_sale_date FROM postings WHERE for_sale_city_id = $_SESSION['zip_code']; Will this work? So now my question to everyone is will this work? I am pretty sure it will but I do not want to set this thing up and realize I overlooked something and have to start from all over from scratch. Any opinions and ideas are welcomed and I will listen to anyone who has some thoughts. I really appreciate the help in advance :D

  Read the article

• SQL SERVER – Installing AdventureWorks Sample Database – SQL in Sixty Seconds #010 – Video

  - by pinaldave

  SQL Server has so many enhancements and features that quite often I feel like playing with various features and try out new things. I often come across situation where I want to try something new but I do not have sample data to experiment with. Also just like any sane developer I do not try any of my new experiments on production server. Additionally, when it is about new version of the SQL Server, there are cases when there is no relevant sample data even available on development server. In this kind of scenario sample database can be very much handy. Additionally, in many SQL Books and online blogs and articles there are scripts written by using AdventureWork database. The often receive request that where people can get sample database as well how to restore sample database. In this sixty seconds video we have discussed the same. You can get various resources used in this video from http://bit.ly/adw2012. More on Errors: SQL SERVER – Install Samples Database Adventure Works for SQL Server 2012 SQL SERVER – 2012 – All Download Links in Single Page – SQL Server 2012 SQLAuthority News – SQL Server 2012 – Microsoft Learning Training and Certification SQLAuthority News – Download Microsoft SQL Server 2012 RTM Now I encourage you to submit your ideas for SQL in Sixty Seconds. We will try to accommodate as many as we can. If we like your idea we promise to share with you educational material. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Database, Pinal Dave, PostADay, SQL, SQL Authority, SQL in Sixty Seconds, SQL Query, SQL Scripts, SQL Server, SQL Tips and Tricks, T SQL, Technology, Video

  Read the article

• SQL SERVER – World Shapefile Download and Upload to Database – Spatial Database

  - by pinaldave

  During my recent, training I was asked by a student if I know a place where he can download spatial files for all the countries around the world, as well as if there is a way to upload shape files to a database. Here is a quick tutorial for it. VDS Technologies has all the spatial files for every location for free. You can download the spatial file from here. If you cannot find the spatial file you are looking for, please leave a comment here, and I will send you the necessary details. Unzip the file to a folder and it will have the following content. Then, download Shape2SQL tool from SharpGIS. This is one of the best tools available to convert shapefiles to SQL tables. Afterwards, run the .exe file. When the file is run for the first time, it will ask for the database properties. Provide your database details. Select the appropriate shape files and the tool will fill up the essential details automatically. If you do not want to create the index on the column, uncheck the box beside it. The screenshot below is simply explains the procedure. You also have to be careful regarding your data, whether that is GEOMETRY or GEOGRAPHY. In this example,  it is GEOMETRY data. Click “Upload to Database”. It will show you the uploading process. Once the shape file is uploaded, close the application and open SQL Server Management Studio (SSMS). Run the following code in SSMS Query Editor. USE Spatial GO SELECT * FROM dbo.world GO This will show the complete map of world after you click on Spatial Results in Spatial Tab. In Spatial Results Set, the Zoom feature is available. From the Select label column, choose the country name in order to show the country name overlaying the country borders. Let me know if this tutorial is helpful enough. I am planning to write a few more posts about this later. Note: Please note that the images displayed here do not reflect the original political boundaries. These data are pretty old and can probably draw incorrect maps as well. I have personally spotted several parts of the map where some countries are located a little bit inaccurately. Reference : Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, SQL, SQL Add-On, SQL Authority, SQL Query, SQL Scripts, SQL Server, SQL Spatial, SQL Tips and Tricks, SQL Utility, T SQL, Technology

  Read the article

• SQL SERVER – Maximize Database Performance with DB Optimizer – SQL in Sixty Seconds #054

  - by Pinal Dave

  Performance tuning is an interesting concept and everybody evaluates it differently. Every developer and DBA have different opinion about how one can do performance tuning. I personally believe performance tuning is a three step process Understanding the Query Identifying the Bottleneck Implementing the Fix While, we are working with large database application and it suddenly starts to slow down. We are all under stress about how we can get back the database back to normal speed. Most of the time we do not have enough time to do deep analysis of what is going wrong as well what will fix the problem. Our primary goal at that time is to just fix the database problem as fast as we can. However, here is one very important thing which we need to keep in our mind is that when we do quick fix, it should not create any further issue with other parts of the system. When time is essence and we want to do deep analysis of our system to give us the best solution we often tend to make mistakes. Sometimes we make mistakes as we do not have proper time to analysis the entire system. Here is what I do when I face such a situation – I take the help of DB Optimizer. It is a fantastic tool and does superlative performance tuning of the system. Everytime when I talk about performance tuning tool, the initial reaction of the people is that they do not want to try this as they believe it requires lots of the learning of the tool before they use it. It is absolutely not true with the case of the DB optimizer. It is a very easy to use and self intuitive tool. Once can get going with the product, in no time. Here is a quick video I have build where I demonstrate how we can identify what index is missing for query and how we can quickly create the index. Entire three steps of the query tuning are completed in less than 60 seconds. If you are into performance tuning and query optimization you should download DB Optimizer and give it a go. Let us see the same concept in following SQL in Sixty Seconds Video: You can Download DB Optimizer and reproduce the same Sixty Seconds experience. Related Tips in SQL in Sixty Seconds: Performance Tuning – Part 1 of 2 – Getting Started and Configuration Performance Tuning – Part 2 of 2 – Analysis, Detection, Tuning and Optimizing What would you like to see in the next SQL in Sixty Seconds video? Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Database, Pinal Dave, PostADay, SQL, SQL Authority, SQL in Sixty Seconds, SQL Interview Questions and Answers, SQL Query, SQL Scripts, SQL Server, SQL Tips and Tricks, T SQL, Technology, Video Tagged: Identity

  Read the article

• Is there any way to send a column value from outer query to inner sub query? [closed]

  - by chetan

  'Discussions' table schema title description desid replyto upvote downvote views browser used a1 none 1 1 12 - bad topic b2 a1 2 3 14 sql database a3 none 4 5 34 - crome b4 a3 3 4 12 The above table has two types of content types Main Topics and Comments. Unique content identifier 'desid' used to identify that its a main topic or a comment. 'desid' starts with 'a' for Main Topic and for comment 'desid' starts with 'b'. For comment 'replyto' is the 'desid' of main topic to which this comment is associated. I like to find out the list of the top main topics that are arranged on the basis of (upvote+downvote+visits+number of comments to it) addition. The following query gives top topics list in order of (upvote+downvote+visits) select * with highest number of upvote+downvote+views by query "select * from [DB_user1212].[dbo].[discussions] where desid like 'a%' order by (upvote+downvote+visited) desc For (comments+upvote+downvote+views ) I tried select * from [DB_user1212].[dbo].[discussions] where desid like 'a%' order by ((select count(*) from [DB_user1212].[dbo].[discussions] where replyto = desid )+upvote+downvote+visited) desc but it didn't work because its not possible to send desid from outer query to inner subquery. How to solve this? Please note that I want solution in query language only.

  Read the article

• End user query syntax?

  - by weberc2

  I'm making a command line tool that allows end users to query a statically-schemed database; however, I want users to be able to specify boolean matchers in their query (effectively things like "get rows where (field1=abcd && field2=efgh) || field3=1234"). I did Googling a solution, but I couldn't find anything suitable for end users--still, this seems like it would be a very common problem so I suspect there is a standard solution. So: What (if any) standard query "languages" are there that might be appropriate for end users? What (if any) de facto standards are there (for example, Unix tools that solve similar problems). Failing the previous two options, can you suggest a syntax that would be simple, concise, and easy to validate?

  Read the article

1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >