Search Results

Search found 18 results on 1 pages for 'dimmer'.

Page 1/1 | 1 

  • How do I get my laptop's screen brightness settings back?

    - by Mason Wheeler
    From when I bought it up until yesterday, my laptop would dim the screen automatically if you let it sit for long enough, and then if you hit a key or moved the mouse, the brightness would jump back to what you had it at. I enjoy that behavior. It works well. Then I booted it up today, and found that now it will dim the screen automatically if you let it sit for long enough, but it doesn't restore the screen brightness. I have to do that manually, every single time, and it's getting really old really fast. It's an Alienware M17 running Windows 7 64-bit, in case that helps.

    Read the article

  • My monitor made a noise and is now dimmer - can I repair this myself?

    - by Ross
    I have a Samsung SyncMaster T190 LCD monitor which I've had for about 5 years. It hissed slightly then went dim (readable but the top half of the screen is less bright). I'm pretty sure that after 5 years of service it's just got to the point where something's burned out, so my question is can I repair this myself, or should I just get a new monitor. I'm currently a student so self repair would be a better option if cost effective.

    Read the article

  • Why is my mdadm raid-1 recovery so slow?

    - by dimmer
    On a system I'm running Ubuntu 10.04. My raid-1 restore started out fast but quickly became ridiculously slow (at this rate the restore will take 150 days!): dimmer@paimon:~$ cat /proc/mdstat Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10] md0 : active raid1 sdc1[2] sdb1[1] 1953513408 blocks [2/1] [_U] [====>................] recovery = 24.4% (477497344/1953513408) finish=217368.0min speed=113K/sec unused devices: <none> Eventhough I have set the kernel variables to reasonably quick values: dimmer@paimon:~$ cat /proc/sys/dev/raid/speed_limit_min 1000000 dimmer@paimon:~$ cat /proc/sys/dev/raid/speed_limit_max 100000000 I am using 2 2.0TB Western Digital Hard Disks, WDC WD20EARS-00M and WDC WD20EARS-00J. I believe they have been partitioned such that their sectors are aligned. dimmer@paimon:/sys$ sudo parted /dev/sdb GNU Parted 2.2 Using /dev/sdb Welcome to GNU Parted! Type 'help' to view a list of commands. (parted) p Model: ATA WDC WD20EARS-00M (scsi) Disk /dev/sdb: 2000GB Sector size (logical/physical): 512B/512B Partition Table: gpt Number Start End Size File system Name Flags 1 1049kB 2000GB 2000GB ext4 (parted) unit s (parted) p Number Start End Size File system Name Flags 1 2048s 3907028991s 3907026944s ext4 (parted) q dimmer@paimon:/sys$ sudo parted /dev/sdc GNU Parted 2.2 Using /dev/sdc Welcome to GNU Parted! Type 'help' to view a list of commands. (parted) p Model: ATA WDC WD20EARS-00J (scsi) Disk /dev/sdc: 2000GB Sector size (logical/physical): 512B/4096B Partition Table: gpt Number Start End Size File system Name Flags 1 1049kB 2000GB 2000GB ext4 I am beginning to think that I have a hardware problem, otherwise I can't imagine why the mdadm restore should be so slow. I have done a benchmark on /dev/sdc using Ubuntu's disk utility GUI app, and the results looked normal so I know that sdc has the capability to write faster than this. I also had the same problem on a similar WD drive that I RMAd because of bad sectors. I suppose it's possible they sent me a replacement with bad sectors too, although there are no SMART values showing them yet. Any ideas? Thanks. As requested, output of top sorted by cpu usage (notice there is ~0 cpu usage). iowait is also zero which seems strange: top - 11:35:13 up 2 days, 9:40, 3 users, load average: 2.87, 2.58, 2.30 Tasks: 142 total, 1 running, 141 sleeping, 0 stopped, 0 zombie Cpu(s): 0.0%us, 0.2%sy, 0.0%ni, 99.8%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 3096304k total, 1482164k used, 1614140k free, 617672k buffers Swap: 1526132k total, 0k used, 1526132k free, 535416k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 45 root 20 0 0 0 0 S 0 0.0 2:17.02 scsi_eh_0 1 root 20 0 2808 1752 1204 S 0 0.1 0:00.46 init 2 root 20 0 0 0 0 S 0 0.0 0:00.00 kthreadd 3 root RT 0 0 0 0 S 0 0.0 0:00.02 migration/0 4 root 20 0 0 0 0 S 0 0.0 0:00.17 ksoftirqd/0 5 root RT 0 0 0 0 S 0 0.0 0:00.00 watchdog/0 6 root RT 0 0 0 0 S 0 0.0 0:00.02 migration/1 ... dmesg errors, definitely looking like hardware: [202884.000157] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [202884.007015] ata5.00: failed command: FLUSH CACHE EXT [202884.013728] ata5.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 0 [202884.013730] res 40/00:00:ff:59:2e/00:00:35:00:00/e0 Emask 0x4 (timeout) [202884.033667] ata5.00: status: { DRDY } [202884.040329] ata5: hard resetting link [202889.400050] ata5: link is slow to respond, please be patient (ready=0) [202894.048087] ata5: COMRESET failed (errno=-16) [202894.054663] ata5: hard resetting link [202899.412049] ata5: link is slow to respond, please be patient (ready=0) [202904.060107] ata5: COMRESET failed (errno=-16) [202904.066646] ata5: hard resetting link [202905.840056] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [202905.849178] ata5.00: configured for UDMA/133 [202905.849188] ata5: EH complete [203899.000292] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [203899.007096] ata5.00: failed command: IDENTIFY DEVICE [203899.013841] ata5.00: cmd ec/00:01:00:00:00/00:00:00:00:00/00 tag 0 pio 512 in [203899.013843] res 40/00:00:ff:f9:f6/00:00:38:00:00/e0 Emask 0x4 (timeout) [203899.041232] ata5.00: status: { DRDY } [203899.048133] ata5: hard resetting link [203899.816134] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [203899.826062] ata5.00: configured for UDMA/133 [203899.826079] ata5: EH complete [204375.000200] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [204375.007421] ata5.00: failed command: IDENTIFY DEVICE [204375.014799] ata5.00: cmd ec/00:01:00:00:00/00:00:00:00:00/00 tag 0 pio 512 in [204375.014800] res 40/00:00:ff:0c:0f/00:00:39:00:00/e0 Emask 0x4 (timeout) [204375.044374] ata5.00: status: { DRDY } [204375.051842] ata5: hard resetting link [204380.408049] ata5: link is slow to respond, please be patient (ready=0) [204384.440076] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [204384.449938] ata5.00: configured for UDMA/133 [204384.449955] ata5: EH complete [204395.988135] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [204395.988140] ata5.00: failed command: IDENTIFY DEVICE [204395.988147] ata5.00: cmd ec/00:01:00:00:00/00:00:00:00:00/00 tag 0 pio 512 in [204395.988149] res 40/00:00:ff:0c:0f/00:00:39:00:00/e0 Emask 0x4 (timeout) [204395.988151] ata5.00: status: { DRDY } [204395.988156] ata5: hard resetting link [204399.320075] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [204399.330487] ata5.00: configured for UDMA/133 [204399.330503] ata5: EH complete

    Read the article

  • Can turning off drm_kms_helper polling affect screen brightness control?

    - by dodecaphonic
    I have a Samsung R430 notebook that has been running Ubuntu for close to a year, now. Since I've upgrated to Maverick, I've been dealing with little, but increasingly annoying issues, that put my faith to question. The first one, a CPU-intensive set of drm_kms_helper, made me compile my own kernel and set polling to off just so I could move my mouse without frequent stuttering. That led me to dealing with a screen that gets dimmer and dimmer after each sleep/wake-up cycle, which eventually leads me to reboot. Since I have seen some KMS and brightness related bugs around, I was wondering if it is a definite cause for my problem. If so, has there been any advance on the excessive polling issue for those of us plagued by it?

    Read the article

  • Acer Aspire Timeline - Power control application?

    - by th3dude19
    I recently purchased an Acer Aspire Timeline 3810TZ notebook. It comes equipped with 2 modes, one for power saving (screen is dimmer, etc) and another for when connected to a power source. However, I'd like to control the settings for power save mode (specifically to make the screen a bit brighter) but the system didn't seem to ship with an app installed to modify these settings. Browsing the support site proved unsuccessful also. Anything out there I can do to control the notebook's power save settings?

    Read the article

  • Thinkpad T530 with Optimus and Docking Station

    - by Vic Boudolf
    I have a Lenovo Thinkpad T530 with Optimus video, which is not supported on 12.04.1. I don't normally need the discrete (nVidia) graphics, so I turn it off in the BIOS settings to achieve longer battery life (and so that the screen dimmer will work), but when placed in the docking station, the integrated (Intel) graphics don't power the HDMI ports. (The VGA port does work, but I want to focus on the HDMI.) This means I have to change the BIOS settings constantly. Is there any way to have the system detect the docking station and power up/enable the discrete graphics accordingly? I don't need to do it on the fly. Just at startup. This post suggests that bumblebee can turn the discrete graphics on and off for specific applications, but I just want to turn it on or off. [2 suggests that vga_switcheroo will not work with nVidia Optimus.

    Read the article

  • Why could cause the keypad backlights to spontaneously illuminate on my Palm Treo?

    - by LeopardSkinPillBoxHat
    I have a Palm Treo 680 smart phone. I have noticed recently that when the phone is turned off, the keypad backlights will spontaneously illuminate. This is particularly annoying because it drains the battery life of the Treo -- when I woke up this morning, the battery was completely flat and I had to plug it in to wake it up again. I suspect that this has something to do with the Energy Dimmer application (I have version 2.16 installed). I have disabled this application today to see if it makes the problem go away. Has anyone else had this problem, and do you have any solutions?

    Read the article

  • What could cause the keypad backlights to spontaneously illuminate on my Palm Treo? [closed]

    - by LeopardSkinPillBoxHat
    I have a Palm Treo 680 smart phone. I have noticed recently that when the phone is turned off, the keypad backlights will spontaneously illuminate. This is particularly annoying because it drains the battery life of the Treo -- when I woke up this morning, the battery was completely flat and I had to plug it in to wake it up again. I suspect that this has something to do with the Energy Dimmer application (I have version 2.16 installed). I have disabled this application today to see if it makes the problem go away. Has anyone else had this problem, and do you have any solutions?

    Read the article

  • How to use my computer to control a lamp?

    - by nona urbiz
    I've been researching computer automation systems, but everything I've found has been overkill for what I'm interested in. Can anyone help me control a lamp that is on my desk, plugged in the wall beneath the desk, with my computer (also on the desk, usually). What got me thinking is that I have the lamp plugged into a Belkin extension cord/surge protector that came with a wireless switch that toggles the power going to 6 of the eight sockets. Can I somehow hook my computer into this? I'm not too afraid to get into some wiring type thing, but do have a somewhat limited budget. It'd also be cool to get a dimmer in the loop too. thanks aha. after more research, i have realized what i'm looking for is instructions for a DIY version of this that won't look so ugly, and that i can build a UI for rather than shortcuts.

    Read the article

  • Does lighter wallpaper consumes lesser power than a Darker one

    - by Lamb
    My VAIO advised me to switch to a White Background, to reduce power consumption. But it seems contradictory to common logic. Its like saying a brighter Torch consuming less than a dimmer one. Common Logic says that, Screen is BLACK when not using any POWER, so displaying black color should not consume any power (because without powering any pixel it gives black color) Also a white screen gives me more light than a darker one, so it should use more Energy. White Wallpaper = More Light Output = More Electrical Energy Consumed Black Wallpaper = Less Light = Less Electricity Consumed My question is - Is there anything wrong with the above argument ? A Lighter Wallpaper consumes less power than a Darker one. Is it true ? If yes, Why ?

    Read the article

  • HP Ambient Light Sensor Adjustment

    - by Robin Day
    I have an HP nc4400 running Windows 7 64 bit. If I have the ambient light sensor enabled, it works well, but, its slightly too dim. I can turn off the light sensor and turn up the brightness manually and its more than bright enough. When I go to the brightness settings in Windows I can make the screen dimmer with the ambient light sensor enabled but cannot make it as bright as if it is disabled. So my question is, is it possible to keep the light sensor enabled but configure it so that the screen is brighter for given "ambient light". At the moment I have to turn it off whenever I'm in the office or outside in sunlight as I need the screen as bright as possible and it seems no matter how light it is, it never goes to full brightness when it's enabled.

    Read the article

  • How do you stop Linux from re-setting the display brightness?

    - by Shawn J. Goff
    After manually setting the display brightness on my laptop, the system re-sets the value. If the laptop is plugged in, the value is set to full brightness; if it is not plugged in, it is set to dimmer. How do I stop that behavior? Note that I am not talking about what it does in response to the event of plugging in or unplugging my system. It changes on it's own - usually several minutes after I change the brightness value. I have observed this behavior on different systems, different distributions, and different desktop environments.

    Read the article

  • Oracle User Communities and Enterprise Manager

    - by Anand Akela
    Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:12.0pt; font-family:"Cambria","serif"; mso-ascii-font-family:Cambria; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Cambria; mso-hansi-theme-font:minor-latin;} Contributed by Joe Dimmer, Senior Business Development Manager, Oracle Enterprise Manager Heightened interest and adoption of Oracle Enterprise Manager has led to keen interest in “manageability” within the user group community.  In response, user groups are equipping their membership with the right tools for implementation and use manageability through education opportunities and Special Interest Groups.  Manageability is increasingly viewed not only as a means to enable the Oracle environment to become a competitive business advantage for organizations, but also as a means to advance the individual careers of those who embrace enterprise management.  Two Oracle user groups – the Independent Oracle User Group (IOUG) and the United Kingdom Oracle User Group (UKOUG) – each have Special Interest Groups where manageability is prominently featured.  There are also efforts underway to establish similarly charted SIGs that will be reported in future blogs.  The good news is, there’s a lot of news! First off, the IOUG will be hosting a Summer Series of live webcasts:  “Configuring and Managing a Private Cloud with Enterprise Manager 12c” by Kai Yu of Dell, Inc.              Wednesday, June 20th from Noon – 1 PM CDT , Click here for details & registration “What is User Experience Monitoring and What is Not? A case study of Oracle Global IT’s implementation of Enterprise Manager 12c and RUEI” by Eric Tran Le of Oracle            Wednesday, July 18th from Noon – 1 PM CDT , Click here for details & registration “Shed some light on the ‘bumps in the night’ with Enterprise Manager 12c” by David Start of Johnson Controls            Wednesday, August 22nd from Noon – 1 PM CDT, Click here for details & registration   In addition, the UKOUG Availability and Infrastructure Management (AIM) SIG is hosting its next meeting on Tuesday, July 3rd at the Met in Leeds where EM 12c Cloud Management will be presented.  Click here for details & registration.  In future posts from Joe, look for news related to the following: ·         IOUG Community Page and Newsletter devoted to manageability ·         Full day of manageability featured during Oracle OpenWorld 2012 “SIG Sunday” ·         Happenings from other regional User Groups that feature manageability Stay Connected: Twitter |  Face book |  You Tube |  Linked in |  Newsletter

    Read the article

  • WPF 3D extrude "a bitmap"

    - by Bgnt44
    Hi, I'm looking for a way to simulate a projector in wpf 3D : i've these "in" parameters : beam shape : a black and white bitmap file beam size ( ex : 30 °) beam color beam intensity ( dimmer ) projector position (x,y,z) beam position (pan(x),tilt(y) relative to projector) First i was thinking of using light object but it seem that wpf can't do that So, now i think that i can make for each projector a polygon from my bitmap... First i need to convert the black and white bitmap to vector. Only Simple shape ( bubble, line,dot,cross ...) Is there any WPF way to do that ? Or maybe a external program file (freeware); then i need to build the polygon, with the shape of the converted bitmap , color , size , orientation in parameter. i don't know how can i defined the lenght of the beam , and if it can be infiny ... To show the beam result, i think of making a room ( floor , wall ...) and beam will end to these wall... i don't care of real light render ( dispersion ...) but the scene render has to be real time and at least 15 times / second (with probably from one to 100 projectors at the same time), information about position, angle,shape,color will be sent for each render... Well so, i need sample for that, i guess that all of these things could be useful for other people If you have sample code : Convert Bitmap to vector Extrude vectors from one point with a angle parameter until collision of a wall Set x,y position of the beam depend of the projector position Set Alpha intensity of the beam, color Maybe i'm totally wrong and WPF is not ready for that , so advise me about other way ( xna,d3D ) with sample of course ;-) Thanks you

    Read the article

  • How Do I Make A Small jQuery Confirm Replacement?

    - by Volomike
    I have a table row with a Delete link on it for deleting that row. I want to create a jQuery feature that pops up above that Delete link an "Are you sure?" yes/no confirm dialog, but in a very small size. How do I achieve this in the least lines of code in jQuery? I mean, I need to determine the x,y of the Delete link that was detected from a click, and then move (and fadeIn()) a DIV into that location. If they click anywhere on that page except Yes on the yes/no, the thing does a fadeOut(). If they click Yes, then it deletes the row with a fadeOut() effect. Note on this I don't need a modal screen dimmer, but the confirm needs to work modally. (Items above that are bolded are something I don't exactly know how to do. Items bolded and italicized are important to what I need to do.) I would think a widget like this would be critical to any Web 2.0 design, much like the Pines Notify feature seems essential.

    Read the article

  • Battery life starts at 2:30 hrs (99%), but less than 1 minute later is only 1:30 hrs (99%)

    - by zondu
    After searching this and other forums, I haven't seen this same issue listed anywhere for Ubuntu 12. Prior to installing Ubuntu 12.10, my Netbook (Acer AspireOne D250, SATA HDD) was consistently getting 2:30-3 hrs battery life under Windows XP Home, SP3. However, immediately after installing Ubuntu 12.10, the battery life starts out at 2:30 hrs (99%), but less than 1 minute later suddenly drops to 1:30 hrs (99%), which seems very odd. It could be a complete coincidence that the battery is suddenly flaky at the exact same moment that Ubuntu 12.10 was installed, but that doesn't seem likely. I'm a newbie to Ubuntu, so I don't have much experience tweaking/trouble-shooting yet. Here's what I've tried so far: enabled laptop mode (sudo su, then echo 5 /proc/sys/vm/laptop_mode) and checked that it is running when the A/C adapter is unplugged, but it doesn't seem to have made any noticeable difference in battery life, installed Jupiter, but it didn't work and messed up the system, so I had to uninstall it, disabled bluetooth (wifi is still on b/c it is necessary), set the screen to lowest brightness, etc., run through at least 1 full power cycle (running until the netbook shut itself off due to critical battery) and have been using it normally (sometimes plugged in, often unplugged until the battery gets very low) for a week since installing Ubuntu 12.10. installed powertop, but have no idea how to interpret its results. Here are the results of acpi -b: w/ A/C adapter: Battery 0: Full, 100% immediately after unplugging: Battery 0: Discharging, 99%, 02:30:20 remaining 1 minute after unplugging: Battery 0: Discharging, 99%, 01:37:49 remaining 2-3 minutes after unplugging: Battery 0: Discharging, 95%, 01:33:01 remaining 10 minutes after unplugging: Battery 0: Discharging, 85%, 01:13:38 remaining Results of cat /sys/class/power_supply/BAT0/uevent: w/ A/C adapter: POWER_SUPPLY_NAME=BAT0 POWER_SUPPLY_STATUS=Full POWER_SUPPLY_PRESENT=1 POWER_SUPPLY_TECHNOLOGY=Li-ion POWER_SUPPLY_CYCLE_COUNT=0 POWER_SUPPLY_VOLTAGE_MIN_DESIGN=10800000 POWER_SUPPLY_VOLTAGE_NOW=12136000 POWER_SUPPLY_CURRENT_NOW=773000 POWER_SUPPLY_CHARGE_FULL_DESIGN=4500000 POWER_SUPPLY_CHARGE_FULL=1956000 POWER_SUPPLY_CHARGE_NOW=1956000 POWER_SUPPLY_MODEL_NAME=UM08B32 POWER_SUPPLY_MANUFACTURER=SANYO POWER_SUPPLY_SERIAL_NUMBER= immediately after unplugging: POWER_SUPPLY_NAME=BAT0 POWER_SUPPLY_STATUS=Discharging POWER_SUPPLY_PRESENT=1 POWER_SUPPLY_TECHNOLOGY=Li-ion POWER_SUPPLY_CYCLE_COUNT=0 POWER_SUPPLY_VOLTAGE_MIN_DESIGN=10800000 POWER_SUPPLY_VOLTAGE_NOW=11886000 POWER_SUPPLY_CURRENT_NOW=773000 POWER_SUPPLY_CHARGE_FULL_DESIGN=4500000 POWER_SUPPLY_CHARGE_FULL=1956000 POWER_SUPPLY_CHARGE_NOW=1937000 POWER_SUPPLY_MODEL_NAME=UM08B32 POWER_SUPPLY_MANUFACTURER=SANYO POWER_SUPPLY_SERIAL_NUMBER= 1 minute later: POWER_SUPPLY_NAME=BAT0 POWER_SUPPLY_STATUS=Discharging POWER_SUPPLY_PRESENT=1 POWER_SUPPLY_TECHNOLOGY=Li-ion POWER_SUPPLY_CYCLE_COUNT=0 POWER_SUPPLY_VOLTAGE_MIN_DESIGN=10800000 POWER_SUPPLY_VOLTAGE_NOW=11728000 POWER_SUPPLY_CURRENT_NOW=1174000 POWER_SUPPLY_CHARGE_FULL_DESIGN=4500000 POWER_SUPPLY_CHARGE_FULL=1956000 POWER_SUPPLY_CHARGE_NOW=1937000 POWER_SUPPLY_MODEL_NAME=UM08B32 POWER_SUPPLY_MANUFACTURER=SANYO POWER_SUPPLY_SERIAL_NUMBER= 2-3 minutes later: POWER_SUPPLY_NAME=BAT0 POWER_SUPPLY_STATUS=Discharging POWER_SUPPLY_PRESENT=1 POWER_SUPPLY_TECHNOLOGY=Li-ion POWER_SUPPLY_CYCLE_COUNT=0 POWER_SUPPLY_VOLTAGE_MIN_DESIGN=10800000 POWER_SUPPLY_VOLTAGE_NOW=11583000 POWER_SUPPLY_CURRENT_NOW=1209000 POWER_SUPPLY_CHARGE_FULL_DESIGN=4500000 POWER_SUPPLY_CHARGE_FULL=1956000 POWER_SUPPLY_CHARGE_NOW=1878000 POWER_SUPPLY_MODEL_NAME=UM08B32 POWER_SUPPLY_MANUFACTURER=SANYO POWER_SUPPLY_SERIAL_NUMBER= 10 minutes later: POWER_SUPPLY_NAME=BAT0 POWER_SUPPLY_STATUS=Discharging POWER_SUPPLY_PRESENT=1 POWER_SUPPLY_TECHNOLOGY=Li-ion POWER_SUPPLY_CYCLE_COUNT=0 POWER_SUPPLY_VOLTAGE_MIN_DESIGN=10800000 POWER_SUPPLY_VOLTAGE_NOW=11230000 POWER_SUPPLY_CURRENT_NOW=1239000 POWER_SUPPLY_CHARGE_FULL_DESIGN=4500000 POWER_SUPPLY_CHARGE_FULL=1956000 POWER_SUPPLY_CHARGE_NOW=1644000 POWER_SUPPLY_MODEL_NAME=UM08B32 POWER_SUPPLY_MANUFACTURER=SANYO POWER_SUPPLY_SERIAL_NUMBER= Results of upower -i /org/freedesktop/UPower/devices/battery_BAT0: w/ A/C adapter: native-path: /sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0A:00/power_supply/BAT0 vendor: SANYO model: UM08B32 power supply: yes updated: Tue Nov 27 15:24:58 2012 (823 seconds ago) has history: yes has statistics: yes battery present: yes rechargeable: yes state: fully-charged energy: 21.1248 Wh energy-empty: 0 Wh energy-full: 21.1248 Wh energy-full-design: 48.6 Wh energy-rate: 8.3484 W voltage: 12.173 V percentage: 100% capacity: 43.4667% technology: lithium-ion immediately after unplugging: native-path: /sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0A:00/power_supply/BAT0 vendor: SANYO model: UM08B32 power supply: yes updated: Tue Nov 27 15:41:25 2012 (1 seconds ago) has history: yes has statistics: yes battery present: yes rechargeable: yes state: discharging energy: 20.9196 Wh energy-empty: 0 Wh energy-full: 21.1248 Wh energy-full-design: 48.6 Wh energy-rate: 8.3484 W voltage: 11.86 V time to empty: 2.5 hours percentage: 99.0286% capacity: 43.4667% technology: lithium-ion History (charge): 1354023683 99.029 discharging 1 minute later: native-path: /sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0A:00/power_supply/BAT0 vendor: SANYO model: UM08B32 power supply: yes updated: Tue Nov 27 15:42:31 2012 (17 seconds ago) has history: yes has statistics: yes battery present: yes rechargeable: yes state: discharging energy: 20.9196 Wh energy-empty: 0 Wh energy-full: 21.1248 Wh energy-full-design: 48.6 Wh energy-rate: 13.5432 W voltage: 11.753 V time to empty: 1.5 hours percentage: 99.0286% capacity: 43.4667% technology: lithium-ion History (charge): 1354023683 99.029 discharging History (rate): 1354023751 13.543 discharging 2-3 minutes later: native-path: /sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0A:00/power_supply/BAT0 vendor: SANYO model: UM08B32 power supply: yes updated: Tue Nov 27 15:45:06 2012 (20 seconds ago) has history: yes has statistics: yes battery present: yes rechargeable: yes state: discharging energy: 20.2824 Wh energy-empty: 0 Wh energy-full: 21.1248 Wh energy-full-design: 48.6 Wh energy-rate: 13.7484 W voltage: 11.545 V time to empty: 1.5 hours percentage: 96.0123% capacity: 43.4667% technology: lithium-ion History (charge): 1354023906 96.012 discharging 1354023844 97.035 discharging History (rate): 1354023906 13.748 discharging 1354023875 12.992 discharging 1354023844 13.284 discharging 10 minutes later: native-path: /sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0A:00/power_supply/BAT0 vendor: SANYO model: UM08B32 power supply: yes updated: Tue Nov 27 15:54:24 2012 (28 seconds ago) has history: yes has statistics: yes battery present: yes rechargeable: yes state: discharging energy: 18.1764 Wh energy-empty: 0 Wh energy-full: 21.1248 Wh energy-full-design: 48.6 Wh energy-rate: 13.2948 W voltage: 11.268 V time to empty: 1.4 hours percentage: 86.0429% capacity: 43.4667% technology: lithium-ion History (charge): 1354024433 86.043 discharging History (rate): 1354024464 13.295 discharging 1354024433 13.662 discharging 1354024402 13.781 discharging I noticed that between #2 and #3 (0 and 1 minutes after unplugging), while the battery still reports 99% charge and drops from 2:30 hr to 1:30 hr, the energy usage goes from 8.34 W to 13.54 W and the current_now increases, but shouldn't it be using less energy in battery mode since the screen is much dimmer and it's in power saving mode? (or is that normal behavior?) It also seems to drain more quickly than what it predicts, especially with the 1-1.25 hour drop in the first minute of being unplugged, which seems odd. What really concerns me is that Ubuntu 12.10 may not be properly managing the battery (with the sudden change in charge/life from 2:30 to 1:30 or 1:15 within a minute of unplugging), and that a new battery may quickly die under Ubuntu 12.10. I'd greatly appreciate any advice/suggestions on what to do, and especially whether there's a way to get back the 1-1.5 hrs of battery life that were suddenly lost when changing from WinXp to Ubuntu 12.10. Thanks :)

    Read the article

  • CodePlex Daily Summary for Monday, March 01, 2010

    CodePlex Daily Summary for Monday, March 01, 2010New ProjectsActiveWorlds World Server Admin PowerShell SnapIn: The purpose of this PowerShell SnapIn is to provide a set of tools to administer the world server from PowerShell. It leverages the ActiveWorlds S...AWS SimpleDB Browser: A basic GUI browser tool for inspection and querying of a SimpleDB.Desktop Dimmer: A simple application for dimming the desktop around windows, videos, or other media.Disk Defuzzer: Compare chaos of files and folders with customizable SQL queries. This little application scans files in any two folders, generates data in an A...Dynamic Configuration: Dynamic configuration is a (very) small library to provide an API compatible replacement for the System.Configuration.ConfigurationManager class so...Expression Encoder 3 Visual Basic Samples: Visual Basic Sample code that calls the Expression Encoder 3 object model.Extended Character Keyboard: An lightweight onscreen keyboard that allows you to enter special characters like "á" and "û". Also supports adding of 7 custom buttons.FileHasher: This project provides a simple tool for generating and verifying file hashes. I created this to help the QA team I work with. The project is all C#...Fluent Assertions: Fluent interface for writing more natural specifying assertions with more clarity than the traditional assertion syntax such as offered by MSTest, ...Foursquare BlogEngine Widget: A Basic Widget for BlogEngine which displays the last foursquare Check-insGraffiti CMS Events Plugin: Plugin for Graffiti CMS that allows creating Event posts and rendering an Event CalendarHeadCounter: HeadCounter is a raid attendance and loot tracking application for World of Warcraft.HRM Core (QL Nhan Su): This is software about Human Resource Management in Viet Nam ------------ Đây là phần mềm Quản lý nhân sự tiền lương ở Việt Nam (Nghiệp vụ ở Việt Nam)IronPython Silverlight Sharpdevelop Template: This IronPython Silverlight SharpDevelop Template makes it easier for you to make Silverlight applications in IronPython with Sharpdevelop.kingbox: my test code for study vs 2005link_attraente: Projeto Conclusão de CursoORMSharp.Net: ORMSharp.Net https://code.google.com/p/ormsharp/ http://www.sqlite.org/ http://sqlite.phxsoftware.com/ http://sourceforge.net/projects/sqlite-dotnet2/Orz framework: Orz framework is more like a helpful library, if you are develop with DotNet framework 3.0, it will be very useful to you. Orz framework encapsul...OTManager: OTManagerSharePoint URL Ping Tool: The Url Ping Tool is a farm feature in SharePoint that provide additional performance and tracing information that can be used to troubleshoot issu...SunShine: SunShine ProjectToolSuite.ValidationExpression: assembly with regular expression for the RegularExpressionValidator controlTwitual Studio: A Visual Studio 2010 based Twitter client. Now you have one less reason for pressing Alt+Tab. Plus you still look like you're working!Velocity Hosting Tool: A program designed to aid a HT Velocity host in hosting and recording tournaments.Watermarker: Adds watermark on pictures to prevent copy. Icon taken from PICOL. Can work with packs of images.Zack's Fiasco - ASP.NET Script Includer: Script includer to * include scripts (JS or CSS) once and only once. * include the correct format by differentiating between release and build. Th...New ReleasesAll-In-One Code Framework: All-In-One Code Framework 2010-02-28: Improved and Newly Added Examples:For an up-to-date list, please refer to All-In-One Code Framework Sample Catalog. Samples for ASP.NET Name ...All-In-One Code Framework (简体中文): All-In-One Code Framework 2010-02-28: Improved and Newly Added Examples:For an up-to-date list, please refer to All-In-One Code Framework Sample Catalog. Latest Download Link: http://c...AWS SimpleDB Browser: SimpleDbBrowser.zip Initial Release: The initial release of the SimpleDbBrowser. Unzip the file in the archive and place them all in a folder, then run the .exe. No installer is used...BattLineSvc: V1: First release of BattLineSvcCC.Votd Screen Saver: CC.Votd 1.0.10.301: More bug fixes and minor enhancements. Note: Only download the (Screen Saver) version if you plan to manually install. For most users the (Install...Dynamic Configuration: DynamicConfiguration Release 1: Dynamic Configuration DLL release.eIDPT - Cartão de Cidadão .NET Wrapper: EIDPT VB6 Demo Program: Cartão de Cidadão Middleware Application installation (v1.21 or 1.22) is required for proper use of the eID Lib.eIDPT - Cartão de Cidadão .NET Wrapper: eIDPT VB6 Demo Program Source: Cartão de Cidadão Middleware Application installation (v1.21 or 1.22) is required for proper use of the eID Lib.ESPEHA: Espeha 10: 1. Help available on F1 and via context menu '?' 2. Width of categiries view is preserved througb app starts 3. Drag'nd'drop for tasks view allows ...Extended Character Keyboard: OnscreenSCK Beta V1.0: OnscreenSCK Beta Version 1.0Extended Character Keyboard: OnscreenSCK Beta V1.0 Source: OnscreenSCK Beta Version 1.0 Source CodeFileHasher: Console Version v 0.5: This release provides a very basic and minimal command-line utility for generating and validating file hashes. The supported command-line paramete...Furcadia Framework for Third Party Programs: 0.2.3 Epic Wrench: Warning: Untested on Linux.FurcadiaLib\Net\NetProxy.cs: Fixed a bug I made before update. FurcadiaFramework_Example\Demo\IDemo.cs: Ignore me. F...Graffiti CMS Events Plugin: Version 1.0: Initial Release of Events PluginHeadCounter: HeadCounter 1.2.3 'Razorgore': Added "Raider Post" feature for posting details of a particular raider. Added Default Period option to allow selection of Short, Long or Lifetime...Home Access Plus+: v3.0.0.0: Version 3.0.0.0 Release Change Log: Reconfiguration of the web.config Ability to add additional links to homepage via web.config Ability to add...Home Access Plus+: v3.0.1.0: Version 3.0.1.0 Release Change Log: Fixed problem with moving File Changes: ~/bin/chs extranet.dll ~/bin/chs extranet.pdbHome Access Plus+: v3.0.2.0: Version 3.0.2.0 Release Change Log: Fixed problem with stylesheet File Changes: ~/chs.masterHRM Core (QL Nhan Su): HRMCore_src: Source of HRMCoreIRC4N00bz: IRC4N00bz v1.0.0.2: There wasn't much updated this weekend. I updated 2 'raw' events. One is all raw messages and the other is events that arn't caught in the dll. ...IronPython Silverlight Sharpdevelop Template: Version 1 Template: Just unzip it into the Sharpdevelop python templates folder For example: C:\Program Files\SharpDevelop\3.0\AddIns\AddIns\BackendBindings\PythonBi...MDownloader: MDownloader-0.15.4.56156: Fixed handling exceptions; previous handling could lead to freezing items state; Fixed validating uploading.com links;OTManager: Activity Log: 2010.02.28 >> Thread Reopened 2010.02.28 >> Re-organized WBD Features/WMBD Features 2010.02.28 >> Project status is active againPicasa Downloader: PicasaDownloader (41175): NOTE: The previous release was accidently the same as the one before that (forgot to rebuild the installer). Changelog: Fixed workitem 10296 (Sav...PicNet Html Table Filter: Version 2.0: Testing w/ JQuery 1.3.2Program Scheduler: Program Scheduler 1.1.4: Release Note: *Bug fix : If the log window is docked and user moves the log window , main window will move too. *Added menu to log window to clear...QueryToGrid Module for DotNetNuke®: QueryToGrid Module version 01.00.00: This is the initial release of this module. Remember... This is just a proof of concept to add AJAX functionality to your DotNetNuke modules.Rainweaver Framework: February 2010 Release: Code drop including an Alpha release of the Entity System. See more information in the Documentation page.RapidWebDev - .NET Enterprise Software Development Infrastructure: ProductManagement Quick Sample 0.1: This is a sample product management application to demonstrate how to develop enterprise software in RapidWebDev. The glossary of the system are ro...Team Foundation Server Revision Labeller for CruiseControl.NET: TFS Labeller for CruiseControl.NET - TFS 2008: ReleaseFirst release of the Team Foundation Server Labeller for CruiseControl.NET. This specific version is bound to TFS 2008 DLLs.ToolSuite.ValidationExpression: 01.00.01.000: first release of the time validation class; the assembly file is ready to use, the documentation ist not complete;VCC: Latest build, v2.1.30228.0: Automatic drop of latest buildWatchersNET CKEditor™ Provider for DotNetNuke: CKEditor Provider 1.7.00: Whats New FileBrowser: Non Admin Users will only see a User Sub folder (..\Portals\0\userfiles\UserName) CKFinder: Non Admin Users will only see ...Watermarker: Watermarker: first public version. can build watermark only in left top corner on one image at once.While You Were Away - WPF Screensaver: Initial Release: This is the code released when the article went live.Most Popular ProjectsMetaSharpRawrWBFS ManagerAJAX Control ToolkitMicrosoft SQL Server Product Samples: DatabaseSilverlight ToolkitWindows Presentation Foundation (WPF)Microsoft SQL Server Community & SamplesASP.NETDotNetNuke® Community EditionMost Active ProjectsRawrBlogEngine.NETMapWindow GISCommon Context Adapterspatterns & practices – Enterprise LibrarySharpMap - Geospatial Application Framework for the CLRSLARToolkit - Silverlight Augmented Reality ToolkitDiffPlex - a .NET Diff GeneratorRapid Entity Framework. (ORM). CTP 2jQuery Library for SharePoint Web Services

    Read the article

  • CodePlex Daily Summary for Tuesday, March 02, 2010

    CodePlex Daily Summary for Tuesday, March 02, 2010New ProjectsAcceptance Test Excel Addin: Acceptance Test Excel Addin is a tool to author, execute and analyze acceptance tests in Excel. The tester write tests using Given-When-Then (Gherk...Adrastus: Related to manage Issue/Item of any type. To be defined later TBDAn opportunity of upgrading Linux operating system: Want to add a new software in Linux operating system? Here is an opportunity. UFS (User Friendly Scheduler) has been designed to make the operating...AspNetPager: AspNetPager is a free custom paging control for ASP.NET web form application. It's one of the most popular ASP.NET third party controls used by chi...AzureRunMe: Run Java, Ruby, Python, [insert language of your choice] applications in Windows Azure. You provide a self contained ZIP file with a runme.bat f...DiffPlex - a .NET Diff Generator: DiffPlex is a combination of a .NET Diffing Library with both a Silverlight and HTML diff viewer.GPA WebClient: GPA project web client.Maintenance Service: A lot of projects need to have a windows service that execute different tasks. If am tired of creating the same service for all this project, so He...Marager Component Framework: Marager Component Framework (mcf)Pod Thrower: An application that gives a simple way to create podcast rss feeds from local computer folders.Rapidshare Episode Downloader: Rapidshare Episode Downloader is a software that enables you (yes, you!) to organize your many episodes of different TV shows in a nice list, prese...Resxus - Total .net string resource management tool: RESXUS is a resource file management tool which is being created under my job-experience of managing multilingual resx files. The first goal of th...SLFX: SLFXTheWhiteAmbit: Hybrid Scanline-Raytracing Engine. VisitorPattern based Scenegraph written in C++. DirectX9 or DirectX10 rendering is used for PrimaryRays and CUDA...TSqlMigrations: Yet another migrations platform right? This is purely sql based (tsql as it is only for Sql Server at this time). This tool is meant to help mana...WAFFLE: Windows Authentication Functional Framework (LE): WAFFLE - Windows Authentication Functional Framework (Light Edition) is a .NET library with a COM interface and a Java bridge that provides a worki...web lib api: This project aim, to pull together the major, web api/webservices for each relervant categorie.WSDLGenerator: A tool to generate a WSDL file from a c# dll which contains one more Microsoft WebServices. The project is build using VS2010RC and uses .net Fram...XNA Re-usable UI Components: The aim of this project is to create a re-usable set of UI game components helping reduce production time for your game. More information can be...YUI Compressor Custom Tool for Visual Studio: This EXTREMELY simple custom tool is used to automatically generate a *.min.css file from your existing code on save. It is merely a packaged versi...New ReleasesAcceptance Test Excel Addin: 1.0.0.0: How to Use Extract AcceptanceTestExcelAddIn-1.0.0.0.zip Run setup.exe Extract PasswordSample.zip Open Excel, your will see a new tab, "QA To...An opportunity of upgrading Linux operating system: UFS: The software provided by me is just a basic one that will run in the terminal through gcc compiler. The developers are therefore requested to make ...AspNetPager: Demo project: AspNetPager version 7.3.2 demo web site projectBusiness Framework: Formula Samples: A sample demonstrating textual language - Formula. It can be used is many business scenarios allowing end-user to configure or interact with the sy...Deblector: Deblector 1.1: This build fixes compatibility with .NET Reflector 6.Desktop Dimmer: March 2010: First release, March 2010EasyDump: EasyDump 1.0.1: Easy Dump 1.0.1 fix duplicate output when execute twiceExtensia: Extensia: Extensia is a very large list of extension methods and a few helper types. Many methods have practical utility (e.g. console parsing) whilst some ...Fluent Assertions: Fluent Assertions release 1.0: The first release of the Fluent Assertions. It contains assertions for the most common types and has several extension points.FolderSize: FolderSize.Win32.1.0.6.0: FolderSize.Win32.1.0.6.0 A simple utility intended to be used to scan harddrives for the folders that take most place and display this to the user...GamerShots.com Screenshot Capture: GamerShots.com Screenshot Capture: Windows Form application written in C# ASP.Net. Allows the user to capture a screen by pressing the "Print Scrn" key or by user input. Then uses ...Jet Login Tool (JetLoginTool): Stopped - 1.5.3713.17328: Fixed: Engine will now actually stop when the "Stop" button is hitJolt Environment - RuneScape Emulator: Jolt Environment 1.0.6000 GOLD: Features since 1.0.3200: - Account Creation via client - Character Saving/Loading (via MySQL serialization) - Ground Objects - Ground Items (with m...jQuery Library for SharePoint Web Services: SPServices 0.5.2: NOTE: While I work on new releases, I post alpha versions. Usually the alpha versions are here to address a particular need. I DO NOT recommend us...LINQ to XSD: 1.0.0: The LINQ to XSD technology provides .NET developers with support for typed XML programming. LINQ to XSD contributes to the LINQ project (.NET Langu...Maintenance Service: Alpha Release: Alpha Release of the SoftwareMDownloader: MDownloader-0.15.5.56206: Fixed many gathered bugs;MDownloader: MDownloader-0.15.6.56217: Fixed retrieving hotfile data using registered accounts.MRDS Services for HiTechnic: HiTechnic Controllers: The HiTechnic Controllers package contains services for MRDS that work with the LEGO NXT and TETRIX Servo and Motor Controllers. Initial ReleaseCo...Open NFe: DANFE 1.9.2: Correções do DANFE que serão incluídas na versão 1.9.2PROGRAMMABLE SOFTWARE DEVELOPMENT ENVIRONMENT: PROGRAMMABLE SOFTWARE DEVELOPMENT ENVIRONMENT-2.4: While testing a standard software parts kit library for strict portability, The following error condition occurred when using the Windows version ...Rapidshare Episode Downloader: RED 0.8: This is an almost fully working version of the software. What DOESN'T work: Showing the list of rapidshare search results (but query is being made...Reusable Library: V1.0.4: A collection of reusable abstractions for enterprise application developer.SharePoint LogViewer: SharePointLogViewer 1.5.1: Follwoing bugs are fixed Bookmarks deleted on refresh/reload Bookmarks not properly navigated on filtered list. Disabled toolbar buttons did n...SharePoint Taxonomy Extensions: SharePoint Taxonomy Extensions 1.1-1: - Some bugfixes - Possibility to switch between alphanummeric und manual sortingSilverSynth - Digital Audio Synthesis for Silverlight: SilverSynth 1.1: SilverSynth 1.1 is a zip file of the source code and includes an updated version of the demo application including presets.SQL Server Reporting Services MSBuild Tasks: Release 1.1.14669: New Features New Task added for Integrated and Native mode: DeleteReportUser Task ReportUserExists TaskTellago DevLabs: BizTalk Data Services v0.2: This release is the first version of the BizTalk Data Services API, a RESTful API for BizTalk Server based on the Open Data (OData) Protocol. The ...VCC: Latest build, v2.1.30301.0: Automatic drop of latest buildWAFFLE: Windows Authentication Functional Framework (LE): 1.2: Build 1.2.4217.0, initial open-source release. - Account lookup locally and in Active Directory. - Enumerating Active Directory domains. - Returns...Watermarker: 0.87: 01.03.2010: • FIXED: some stability fixes • ADDED: ability to choose any number of pictures and folder to save them after the operation completesWSDLGenerator: WSDLGenerator 0.0.0.1: Initial versionXNA Re-usable UI Components: Re-usable Game Components V1.0: First public release of the source codeYUI Compressor Custom Tool for Visual Studio: YUI Compressor Custom Tool with Installer v0.1a: Initial release with alpha installer - documentation to follow.Most Popular ProjectsMetaSharpRawrWBFS ManagerAJAX Control ToolkitMicrosoft SQL Server Product Samples: DatabaseSilverlight ToolkitWindows Presentation Foundation (WPF)Microsoft SQL Server Community & SamplesASP.NETImage Resizer Powertoy Clone for WindowsMost Active ProjectsRawrBlogEngine.NETMapWindow GISpatterns & practices – Enterprise LibraryjQuery Library for SharePoint Web ServicesSharpMap - Geospatial Application Framework for the CLRRapid Entity Framework (ORM). CTP 2DiffPlex - a .NET Diff GeneratorMDT Web FrontEndWPF Dialogs

    Read the article

1