Search Results

Search found 21327 results on 854 pages for 'display resolution'.

Page 1/854 | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

• Low resolution Dektop intel i7 3770 and intel board DH67BL

  - by rtorres

  I installed Ubuntu 12.04.1 in a desktop with the following specs: CPU: Intel(R) Core(TM) i7-3770 CPU @ 3.40GHz Motherboard: Intel DH67B However the monitor is not identified (Monitor: Unknown) such that maximum resolution is 1024x768. This occurs with Samsung Syncmaster 2033 (resolution 1900x600), and is the same with ViewSonic VX2453mh-LED (resolution 1920x1080). I'd be very grateful if anyone could give me a suggestion as to how to fix the resolution.

  Read the article

• Display resolution problem with Sony TV and Intel integrated graphics

  - by user96195

  I am trying to set the correct display resolution for my Sony TV (KDL-32V2000, native resolution 1366x768) connected via HDMI to my HTPC running Ubuntu 12.04. I have a Intel Core i3-530 and Intel mobo (DH57JG), so no proprietary graphics drivers. The problem is that I can't get the correct resolution to display on the TV. Initially I only had 1024x768 (or similar) as a maximum resolution, which was not displayed properly. I tried a few steps, including generating an xorg.conf (initially didn't have one) and adding the segment as described in this post regarding this particular TV. I couldn't get this to work, and at this stage have reverted to running without an xorg.conf. Another post suggested upgrading to kernel 3.5, which did give me a 1920x1080 resolution option. This results in the TV cutting off a fair bit of the edges of the screen. My Dell laptop with ATI drivers recognises the TV screen and works well via HDMI. Any idea how to proceed?

  Read the article

• KVM switching from lower resolution system resets Ubuntu high resolution

  - by Ed Manet

  I'm running 12.04 desktop on my main desktop and it's hooked to a KVM (IOGear miniview) that shares the peripherals with a SLES 11 machine. The SLES 11 machine can't get the same resolution as the Ubuntu machine because of different graphics hardware. If I switch from Ubuntu to SLES and stay there too long, when I switch back to Ubuntu the screen resolution on Ubuntu is reset to the same as SLES. I can get it back easily just opening the Displays configuration; it immediately resets to the high resolution as soon as the Displays window opens. But all my open windows have been maximized and it's a P.I.T.A. having to resize them all again. How do I get it to just stay at the high resolution between switching between systems? Is there a setting in the Xorg conf file I need to set?

  Read the article

• Resolution stuck in 640x480 in grub, 11.04 and 12.04

  - by user89797

  I have three operating systems on my machine, Windows 7x64, Ubuntu 11.10 and 12.04 both x64 as well. All three were running at full resolution for my monitor, as well as in the Grub 1.99 boot screen. After booting into Windows, I rebooted my machine and found my Grub resolution was suddenly 640x480. Booting into both versions of Ubuntu, I find myself stuck at that resolution as well. I made no driver changes recently, and hadn't even booted into the 11.10 build in a month or more. I've gone through both proprietary Nvidia driver options for my card (GeForce 9800GT) as well as the open source drivers in 12.04 to no avail. I can't figure out what could have caused this change in both versions of Ubuntu and Grub simultaneously. Windows 7 is unaffected so I think that safely rules out hardware failure. EDIT Ok, so I couldn't boot an graphical live disks, I tried ubuntu 12.04 i386 and x64 as well as 12.10 beta x64 and all of them would flash the initial logo, go to a blank screen with a flashing cursor in the upper left and then my display would die. I managed to boot 12.04 server and get into recovery. I reinstalled grub and went into recovery mode for my 12.04 build. If I boot in safe graphics mode I can get 1280x768, but as soon as I reboot it's broken again. I've tried reinstalling the nvidia drivers and that leaves me with a system stuck at max 640x480. None of these changes have had any impact on the 11.10 build, which is still stuck at 640x480 Given that I can push a somewhat higher resolution in 12.04, and full resolution in windows 7 I'm pretty convinced it's not an issue of my monitor failing. It must be something to do with the graphics drivers. I can't figure out what could be the issue though. I'm especially perplexed that I can't boot any live images

  Read the article

• Ubuntu 12.10 - Resolution stuck at 1024x768 using Open Source Radeon Driver

  - by mumble

  I'm using Ubuntu 12.10 with an ATI Radeon HD5670 card. I currently have the open source xorg-edgers driver. I've been using this driver interchangeably with the Radeon open source driver since fglrx seems to give me a lot of freezes. So I can't really use proprietary drivers, the Radeon driver seems to be stable for me, the resolution is the only problem. The resolution is stuck at 1024x768, where my monitor's native resolution is 1366x768. How do I enable that resolution? Going to System Settings Display only gives me 800x600 and 1024x768 by the way. And just another question, how do I know if xorg-edgers driver is enabled? When I run sudo lshw -c video, I still see the radeon driver. configuration: driver=radeon latency=0 Thanks a lot in advance!

  Read the article

• external monitor can't display max resolution

  - by mp94

  I had been using an external monitor, an old Dell Inc. 19" with Ubuntu 14.04 for a while now, The resolution it displayed at was something like 1366x768 or 1366x1024, I can't remember exactly which one it was. However, one day when I restarted my computer, I can no longer get that resolution on the external display, and can now display a max resolution of 1024x768. Does anyone know why this might happen all of a sudden? I think it was after running a system update.

  Read the article

• screen DPI - is there and equivalent command/action to Windows 150% Display

  - by Yekhezkel Yovel

  I have a wide screen of high resolution and I see everything small on it. So In windows I set the display to 150%, I would like to do something similar in Ubuntu. Simply changing screen resolution to lower resolution doesn't help because Ubuntu is in a virtual machine and it simply changes the VM window to the actual resolution. Is there a command or a simple hack that can do the trick? EDIT: I am running Ubuntu as a VirtualBox VM on Windows 7 host.

  Read the article

• Ubuntu won't display netbook's native resolution

  - by Daniel

  FYI: My Netbook model is HP Mini 210-1004sa, which comes with Intel Graphics Media Accelerator 3150, and has a display 10.1" Active Matrix Colour TFT 1024 x 600. I recently removed Windows 7 Starter from my netbook, and replaced it with Ubuntu 12.10. The problem is the OS doesn't seem to recognise the native display resolution of 1024x600 i.e. the bottom bits of Ubuntu is hidden beneath the screen & the only 2 available resolutions are: the default 1024x768 and 800x600. I've also thought about replacing Ubuntu with Lubuntu or Puppy Linux, as the system does run a bit slow, but I can't, as then I won't be able to access the taskbar and application menu which will be hidden beneath the screen. Only Ubuntu with Unity is currently usable, as the Unity Launcher is visible enough. I was able to define a custom resolution 1024x600 using the Q&A: How set my monitor resolution? but when I set that resolution, there appears a black band at the top of the screen and the desktop area is lowered, with bits of it hidden beneath the screen. I tried leaving it at this new resolution and restarting the system to see if the black band would disappear & the display will fit correctly, but it gets reset to 1024x768 at startup and displays following error: Could not apply the stored configuration for monitors none of the selected modes were compatible with the possible modes: Trying modes for CRTC 63 CRTC 63: trying mode 800x600@60Hz with output at 1024x600@60Hz (pass 0) CRTC 63: trying mode 800x600@56Hz with output at 1024x600@60Hz (pass 0) CRTC 63: trying mode 640x480@60Hz with output at 1024x600@60Hz (pass 0) CRTC 63: trying mode 1024x768@60Hz with output at 1024x600@60Hz (pass 1) CRTC 63: trying mode 800x600@60Hz with output at 1024x600@60Hz (pass 1) CRTC 63: trying mode 800x600@56Hz with output at 1024x600@60Hz (pass 1) CRTC 63: trying mode 640x480@60Hz with output at 1024x600@60Hz (pass 1) Trying modes for CRTC 64 CRTC 64: trying mode 1024x768@60Hz with output at 1024x600@60Hz (pass 0) CRTC 64: trying mode 800x600@60Hz with output at 1024x600@60Hz (pass 0) CRTC 64: trying mode 800x600@56Hz with output at 1024x600@60Hz (pass 0) CRTC 64: trying mode 640x480@60Hz with output at 1024x600@60Hz (pass 0) CRTC 64: trying mode 1024x768@60Hz with output at 1024x600@60Hz (pass 1) CRTC 64: trying mode 800x600@60Hz with output at 1024x600@60Hz (pass 1) CRTC 64: trying mode 800x600@56Hz with output at 1024x600@60Hz (pass 1) CRTC 64: trying mode 640x480@60Hz with output at 1024x600@60Hz (pass 1)

  Read the article

• Ubuntu Linux won't display netbook's native resolution

  - by Daniel

  FYI: My Netbook model is HP Mini 210-1004sa, which comes with Intel Graphics Media Accelerator 3150, and has a display 10.1" Active Matrix Colour TFT 1024 x 600. I recently removed Windows 7 Starter from my netbook, and replaced it with Ubuntu 12.10. The problem is the OS doesn't seem to recognise the native display resolution of 1024x600 i.e. the bottom bits of Ubuntu is hidden beneath the screen & the only 2 available resolutions are: the default 1024x768 and 800x600. I've also thought about replacing Ubuntu with Lubuntu or Puppy Linux, as the system does run a bit slow, but I can't, as then I won't be able to access the taskbar and application menu which will be hidden beneath the screen. Only Ubuntu with Unity is currently usable, as the Unity Launcher is visible enough. I was able to define a custom resolution 1024x600 using the Q&A: How set my monitor resolution? but when I set that resolution, there appears a black band at the top of the screen and the desktop area is lowered, with bits of it hidden beneath the screen. I tried leaving it at this new resolution and restarting the system to see if the black band would disappear & the display will fit correctly, but it gets reset to 1024x768 at startup and displays following error: Could not apply the stored configuration for monitors none of the selected modes were compatible with the possible modes: Trying modes for CRTC 63 CRTC 63: trying mode 800x600@60Hz with output at 1024x600@60Hz (pass 0) CRTC 63: trying mode 800x600@56Hz with output at 1024x600@60Hz (pass 0) CRTC 63: trying mode 640x480@60Hz with output at 1024x600@60Hz (pass 0) CRTC 63: trying mode 1024x768@60Hz with output at 1024x600@60Hz (pass 1) CRTC 63: trying mode 800x600@60Hz with output at 1024x600@60Hz (pass 1) CRTC 63: trying mode 800x600@56Hz with output at 1024x600@60Hz (pass 1) CRTC 63: trying mode 640x480@60Hz with output at 1024x600@60Hz (pass 1) Trying modes for CRTC 64 CRTC 64: trying mode 1024x768@60Hz with output at 1024x600@60Hz (pass 0) CRTC 64: trying mode 800x600@60Hz with output at 1024x600@60Hz (pass 0) CRTC 64: trying mode 800x600@56Hz with output at 1024x600@60Hz (pass 0) CRTC 64: trying mode 640x480@60Hz with output at 1024x600@60Hz (pass 0) CRTC 64: trying mode 1024x768@60Hz with output at 1024x600@60Hz (pass 1) CRTC 64: trying mode 800x600@60Hz with output at 1024x600@60Hz (pass 1) CRTC 64: trying mode 800x600@56Hz with output at 1024x600@60Hz (pass 1) CRTC 64: trying mode 640x480@60Hz with output at 1024x600@60Hz (pass 1)

  Read the article

• Can't run monitor at native 1080p resolution on Windows 7

  - by Rex

  I have a 24" ViewSonic VX2453 monitor that supports 1920x1080p, connected using HDMI. However at that resolution, the desktop goes off the screen. Using the Nvidia control panel, I have to set it to a custom resolution of 1804x1014 to display correctly. The monitor has its drivers properly installed (the correct model name shows up in control panel after installing the drivers), and I'm running 64 bit Win7 Ultimate. I have a GeForce 560 Ti card, if that helps. Why does this happen?

  Read the article

• adjust resolution on Ubuntu Server 10.04?

  - by Mike Grace

  Installed Ubuntu Server 10.04 on an old laptop and I noticed that the system is trying to show the CLI below my screen. This means that if I run a script or a program with a bunch of output, once it is done, I have to press return several times to bring the output to the point where I can actually see it on the screen. I also have to clear the screen to be able to see what I am typing at the current command prompt. The laptop is an EliteGroup 536S with a native screen resolution of 1024 x 768 How can I adjust the resolution for Ubuntu Server 10.04? What file do I need to edit if editing a file is the solution? I've seen posts on how to change the resolution on the desktop version of Ubuntu but not the server version.

  Read the article

• Disable laptop's display on boot when used with external display

  - by Ryan

  I keep my laptop tucked away and solely use an external display with it via HDMI. In Windows 7 display settings, I have it set up to "Show desktop only on 2 [my external display]" This works fine in all cases except when I boot the laptop when the external display is already connected. In that case, the laptop's display stays on and sticks at the Windows 7 boot logo unless I manually shut the display off. (I should mention that while the laptop's display is stuck at the boot logo, the external monitor and computer are running just fine.) The laptop is an Asus N56VZ with Nvidia 650m graphics and the latest drivers. I've checked Nvidia's control panel as well as the BIOS and nothing looked very promising. Any ideas as to how I can get my laptop screen to shut itself off after booting into Windows?

  Read the article

• Monitor resolution messed up, monitor is unknown.

  - by Kaustubh P

  Is there anyway to reset my monitor? My moitor is using the xorg.conf file. I use 10.04, without any Graphics Card. My monitor is an Acer X193W, with a native resolution of 1440x900. This is my xorg.conf file: Section "Screen" Identifier "Configured Screen Device" Device "Configured Video Device" Monitor "Test" DefaultDepth 16 SubSection "Display" Depth 16 Modes "1440x900_60.00" EndSubSection EndSection #Section "Device" # Identifier "Configured Video Device" # HorizSync # VertRefresh #EndSection I still cant view the native resolution, even when defined in the xorg file. An way I can revert to the default, or delete some files, to make the system detect the monitor again? My last resort is the cvt method, and adding it to the xrandr file. EDIT: I use Intel Drivers. My /proc/fb contains 0 VGA16 VGA

  Read the article

• Cannot set monitor to native resolution

  - by S B

  problem is similar to so many other users, but solutions found do not work. Background: Fresh install of 12.04 (completely updated) on a Fit-PC2 (specs). Read in several places that the new 3.X kernel that 12.04 runs on has a new psb_gfx driver which supports the gma500 graphics card (poulsbo chipset). All's pretty much working (there are some glitches which are documented, so I won't raise them here), except for the screen resolution. My native monitor resolution is 1920X1080, but all I get is 1024x768. Output running xrandr: xrandr: Failed to get size of gamma for output default Screen 0: minimum 1024 x 768, current 1024 x 768, maximum 1024 x 768 default connected 1024x768+0+0 0mm x 0mm 1024x768 0.0* Although I read that Ubuntu does not come with an xorg.conf file anymore, I also tried running sudo X :1 -configure, and here's the end of the output: Number of created screens does not match number of detected devices. Configuration failed. When I look in the xorg.conf.new file created in my home directory, it seems that for some reason X thinks I have two screens. Don't know what to do with that. Ideas anyone? Thanks for your time.

  Read the article

• eepc 100h ubuntu 12.04 external monitor higher resolution modes force a rotated display

  - by Acky

  Hi I have a eeepc 1000h netbook. I've just installed ubuntu. I mainly use an external display (samsung ta350 full hd 22 inch affair) but when I select 1080 from the dropdown list, my only options are for a rotated portrait. My neck's non too supple, so tilting my head for extended periods is not really viable. :-) Any ideas on making ubuntu display 1080 normal landscape? It must surely be possible. My gparted boot cd does it perfectly. Any help greatly appreciated. Cheers!

  Read the article

• Ubuntu won't fit 10" netbook's native display

  - by Daniel

  I recently removed Windows 7 Starter from my netbook, and replaced it with Ubuntu 12.10. The problem is some bits of the system doesn't fit the native display resolution of 1024x600 i.e. the bottom bits of Ubuntu is hidden beneath the screen & the only 2 available resolutions are: the default 1024x768 and 800x600. I've also thought about replacing Ubuntu with Lubuntu or Puppy Linux, as the system does run a bit slow, but I can't, as then I won't be able to access the taskbar and application menu which will be hidden beneath the screen. Only Ubuntu with Unity is currently usable, as I can see the Unity Launcher. My Netbook model is HP Mini 210-1004sa, which comes with Intel Graphics Media Accelerator 3150, and has a display 10.1" Active Matrix Colour TFT 1024 x 600. I was able to define a custom resolution 1024x600 using the Q&A: How set my monitor resolution? but when I set that resolution, the desktop area is lowered, with bits of it hidden beneath the screen; & there's a black space left at the top of the screen. I had to revert to the old setting 1024x768 to push the desktop upwards and remove the black space.

  Read the article

• Apple Cinema Display 23" and grub

  - by Joshua Pruitt

  As per the title, I'm running my display on an older 23" Apple Cinema Display (because I still love it, darn it). I'm pushing it with an ATI Radeon DVI dual-link PCIe card. It works just fine, except GRUB doesn't seem able to push out the 1920x1200 pixel resolution needed in order to show me a boot menu! So..., I keep a smaller second monitor connected as the primary display so that I can see the boot menu and boot the system (I don't use that display once booted). This is a goofy work-around, and I'd like to just use my single display exclusively to boot the machine. I found some grub codes for higher resolutions, but not for 1920x1200. Is it capable of this? Did I just miss it? Thanks in advance!!!

  Read the article

• Cloning (mirroring) laptop display to area of external monitor display

  - by intuited

  I'm using Maverick "10.10" Meercat on a HP Pavilion tx2110. This machine has an NVidia Go6150 graphics card, and sports a 1280x800 display. I have an external monitor which can do 1280x1024 resolution. FWIW I'm using openbox as my window manager; as I understand it this shouldn't be a factor. I'd like to clone the display to the monitor, so that the size of the desktop remains at 1280x800, and there is a horizontal blank area on the external monitor. I.E. I want to avoid having to pan the display of the desktop on either monitor. So the actual resolution of the monitor would be 1280x1024, but the resolution of the section of the monitor where stuff was actually being displayed would be 1280x800. Using the nvidia-settings applet, I'm able to set up the cloned display so that the desktop size is 1280x1024 (the resolution of the external monitor), but can't find a way to instead have the desktop size stay at the resolution of the laptop's built-in display. Is this achievable? Ideally I'd like the external monitor's blank area to be at the top of the screen, i.e. for it to align the display with the bottom of the screen.

  Read the article

• Force the computer to always use current display settings

  - by sazpaz

  So I'm having a terrible black screen problem with my new installation of Windows 8. The screen basically goes to black every time I turn it on or sleep, or connect to an external or monitor. I dont really know what steps actually cause the problem and cant seem to figure what steps allow the screen to come back, besides forcing restarts, going to sleep and waking up, and smashing Win + P. I have a strong feeling it's because the Switchable graphics I have (Intel HD + Radeon 5060), so I'm looking for a way to make the computer always use a specified mode (i.e the current mode I'm on, that does show stuff on the screen) and force it to use it everytime? Any ideas? EDIT: I've Installed all the latest drivers I've found. Tried most of the solutions around the web for this problem. Updated the BIOS to UEFI (from HP Support Assistant), etc. Laptop is an HP- Envy 14

  Read the article

• How to reset display settings in XFCE \ Ubuntu 12.04 and also flgrx drivers

  - by Agent24

  I recently upgraded to Ubuntu 12.04 and since I hate unity I installed the Xubuntu package and am using XFCE instead. Since I have a Radeon HD5770 I also installed the fglrx drivers. This all went fine (aside from the fact that the post-release update fglrx drivers have an error on installation and Ubuntu thinks they're not installed when they actually are. I configured my display settings (dual monitors, a 17" CRT on VGA and a 17" LCD on DVI) in the amdcccle program and everything was perfect. THEN, 2 days ago, I accidentally clicked on the "Display" settings in XFCE "settings" manager. After that, everything got screwed. Now, I normally run the CRT at 1152x854 and the LCD at 1280x1024 with the CRT as my primary monitor (with panel) and the LCD without panels etc just to display other windows when I want to drag them over there. The problem is now that if I set my CRT to 1152x864, it stays at 1280x1024 virtually and half the stuff falls off the screen. It also puts the LCD at 1280x1024 BUT then overlays the CRT's display ontop with different wallpaper in an L shape down the right-hand and bottom edges. In short, nothing makes sense and everything is FUBAR. I tried uninstalling fglrx through synaptic, and renaming xorg.conf and also the xfce XML file that has monitor settings but it still won't make sense. Unity on the other hand can currently set everything normally so the problem appears to be only with XFCE. In any case, I can't even get the fglrx drivers back, when I re-installed them, I can't run amdccle anymore as it says the driver isn't installed!! Can someone help me reset my XFCE settings so the monitors aren't screwed with some incorrect virtual desktop size and also so I can get fglrx drivers back and working? I really don't want to have to format and reinstall and go through all the hassle but it looks like I may have to :(

  Read the article

• Display cloning with standard(Windows) display drivers

  - by Anton Kazennikov

  Is it possible to clone display on an external monitor in Windows XP only using drivers shipped with Windows? I know, it is possible with drivers shipped by NVIDIA, ATI/AMD or Intel, I know. But all my efforts led only to enlarging virtual screen to two monitors or to setting the main monitor, but not cloning

  Read the article

• Viewing a large-resolution VNC server through a small-resolution viewer in Ubuntu

  - by Madiyaan Damha

  I have two Ubuntu computers, one with a large screen resolution (1920x1600) that is running default ubuntu vnc server. I have another computer that has a resolution of about 1200x1024 that I use to vnc into the server (I use the default ubuntu vnc viewer). Now everything works fine except there are annoying scrollbars in the viewer because the server's desktop resolution is so much higher than the viewer's. Is there a way to: 1) Scale the server's desktop down to the viewer's resolution. I know there will be a loss of image quality, but I am willing to try it out. This should be something like how windows media player or vlc scales down the window (and does some interpolation of pixels). 2) Automatically shrink the resolution of the server to the client's when I connect and scale the resolution back when I disconnect. This seems like a less attractive solution. 3) Any other solution that gurus out there use? I am sure someone has experienced this before (annoying scroll bars) so there must be a solution out there. Thanks,

  Read the article

• Viewing a large-resolution VNC server through a small-resolution viewer in Ubuntu

  - by Madiyaan Damha

  I have two Ubuntu computers, one with a large screen resolution (1920x1600) that is running the default Ubuntu VNC server. I have another computer that has a resolution of about 1200x1024 that I use to VNC into the server using the default Ubuntu VNC viewer). Now everything works fine except there are annoying scrollbars in the viewer because the server's desktop resolution is so much higher than the viewer's. Is there a way to: Scale the server's desktop down to the viewer's resolution. I know there will be a loss of image quality, but I am willing to try it out. This should be something like how Windows Media Player or VLC scales down the window (and does some interpolation of pixels). Automatically shrink the resolution of the server to the client's when I connect and scale the resolution back when I disconnect. This seems like a less attractive solution. Any other solution that gurus out there use? I am sure someone has experienced this before (annoying scroll bars) so there must be a solution out there.

  Read the article

• XNA Windows Resolution / Mouse Position Bug

  - by Ian Hern

  In XNA, when in windowed mode and resolution (set via PreferredBackBufferWidth/Height) is close to the resolution of the display, the view is distorted (zoomed in a bit)and the mouse coordinates are wrong. Here is what it looks like when I draw a bunch of lines to the screen. (Normal, Error on my ASUS Notebook G73Jh, Error on my EEE PC 1001P) In the top left of the screen the mouse position is correct, but the further you get away the more out of sync it becomes. Here are some images of the mouse in different positions and the game drawing a circle underneath where it thinks the mouse is. (Top Left, Bottom Right) If you shrink the resolution by a couple pixels then it goes back to working like normal, my first though at a fix was to limit the max resolution to a little smaller than the display resolution. I figured out the maximum resolution that works in a couple different modes, but there doesn't seem to be a pattern that would allow me to determine it based off the display resolution. Computer | Screen Resolution | Max Error-Free | Difference ASUS Notebook G73Jh | 1920x1080 | 1924x1059 | +4x-21 ASUS Notebook G73Jh | 1024x600 | 1018x568 | -6x-32 EEE PC 1001P | 1024x600 | 1020x574 | -4x-26 Because the differences don't form a pattern I can't hack in a solution, the one even has +4 which baffles me. Here is a project that demonstrates the problem, just set the resolution to the resolution of your display. Any ideas on how I might fix this issue? As an insteresting aside, I tried to use FRAPS to capture a video of the issue but fraps actually records without distortion or mouse offset.

  Read the article

• External display, windows are moving to external display

  - by hextler

  I use external display with lenovo w520, I am running it with following script xrandr --output LVDS1 --auto --primary --output VIRTUAL --mode 1920x1200 --left-of LVDS1 optirun screenclone -d :8 -x 1 xrandr --output VIRTUAL --off but I have number of problems. All windows are moving on external display If I interrupt this script I cannot run it second time without restarting xorg. yakuake is changing height and does not showing tabs. I cannot make external display primary, in that case I cannot see windows. yakuake is changing height and does not showing tabs. If you know how to solve thisw issues please let me know. Thanks in advance!

  Read the article

1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >